Pilotage Автомодель Monster ONE RTR 4WD 1/10 (RC16588) Руководство пользователя

Категория
Игрушки с дистанционным управлением
Тип
Руководство пользователя
MONSTER ONE
TRUGGY ONE
User's Manual
Инструкция по эксплуатации
1
CONTENTS
Introduction ............................................................................................ 3
Warranty ...............................................................................................3
Precautions .............................................................................................4
Battery charging precautions and guidelines .............................................................5
Radio information .......................................................................................5
Technical specications ................................................................................. 6
Package contents .......................................................................................6
Required for opperatoin (sold seperately) ................................................................ 7
Tools and materials required for assembly and maintenance ..............................................7
Chassis overview ........................................................................................ 8
Radio overview .........................................................................................9
Start up guide .........................................................................................11
Function check and model setup .......................................................................12
Running your model ...................................................................................17
Driving practice ........................................................................................17
Turning o the model ..................................................................................19
Fine tuning your model ................................................................................19
Troubleshooting .......................................................................................22
Contact ...............................................................................................44
2
www.pilotage-rc.ru
СОДЕРЖАНИЕ
Введение ..............................................................................................23
Меры предосторожности .............................................................................23
Информация об используемой аппаратуре ...........................................................24
Меры предосторожности при зарядке и эксплуатации аккумулятора ................................25
Технические характеристики .........................................................................26
Комплектация .........................................................................................26
Элементы не входящие в комплект (приобретаются отдельно) .......................................27
Инструменты для сборки и обслуживания модели ....................................................27
Шасси .................................................................................................28
Обзор системы радиоуправления ....................................................................29
Подготовка к эксплуатации ...........................................................................31
Включение модели и передатчика ....................................................................32
Проверка настроек управления ......................................................................33
Выключение модели ..................................................................................36
Перед запуском .......................................................................................36
Практика вождения ...................................................................................36
Подготовка модели к запуску .........................................................................39
Практика вождения ...................................................................................39
Точная настройка модели .............................................................................40
Поиск неисправностей и их устранение ..............................................................43
Контактная информация ..............................................................................44
3
INTRODUCTION
Thank you for your purchase of Pilotage Truggy and Pilotage Monster model. We hope that this model will
provide you with years of enjoyment and entertainment.
This model has been designed and constructed to appeal to a wide range of modeling enthusiasts. This model is
easy to start, easy to run and simple to maintain, making it a good selection for the novice hobbyist. The model
also incorporates numerous features that appeal to seasoned hobbyists as well.
Though this model is designed to be intuitive and easy to use, it is essential to keep in mind that these models
are not toys, but rather, sophisticated, functional, powerful model automobiles. In order to ensure a long and
safe operational life it is important that you carefully review all the below warnings, precautions and warranty
terms. Please retain these instructions and the box for further reference.
Due to the fact that Pilotage is constantly improving the quality and functional characteristics of its products,
some details, colors, and functions may dier slightly from the images presented on the box and in the
instructions.
WARRANTY
Pilotage Marketing LLP guarantees that this model is free from defects both in material and craftsmanship on the
date of purchase. This guarantee does not cover any component parts damaged by use or modication. Pilotage
Marketing LLP’s liability will under no circumstances exceed the original cost of the purchased model. Moreover,
Pilotage Marketing LLP reserves the right to change or modify this warranty without notice. If upon purchasing
this product the buyer nds defects as a result of the manufacturing process, he/she is recommended to return
this product to any Pilotage store located in the country of purchase to exchange or refund the product.
Given that Pilotage Marketing LLP has no control over the nal assembly or use of this product, Pilotage
Marketing LLP shall assume no liability for damage caused resulting from the use by the user of the nal user-
assembled product.
By using this product the user accepts all resulting liability. If the purchaser of this product is not prepared to
accept the liability associated with the use of this item, they are advised to return this model within 14 days
of the initial purchase to any Pilotage store in the country of purchase. The product must be in complete and
unused condition along with receipt of purchase at the moment of return.
The terms of the above warranty are not applicable on the territory of the Russian Federation.
4
www.pilotage-rc.com
PRECAUTIONS
1. Do not leave this model in direct sunlight as heat may deform the model and damage the components.
2. Never use this model near power lines, radio towers, or other locations where there is known high radio
wave or electromagnetic activity.
3. If water or any form of liquid falls on the transmitter, receiver or any other components of the model,
immediately stop using the product to prevent short-circuiting that may act as a re hazard.
4. Store the model in a cool, dry location as high humidity can damage the model and its components.
5. Protect this model from bumps, jolts and concussions from other objects as this could damage the
components.
6. Do not subject the model to extreme dirt or excessive dust. After use, always wipe the model down with a
dry, clean cloth.
7. Never place other objects on top of the model.
8. Only use the model in wide open spaces that are free of pedestrians and bystanders.
9. Never use this model in the following locations:
• roads and streets open to vehicular trac.
• public areas where children or general gatherings are permitted.
• where open space is not sucient for proper and safe operation of the model.
10. If these precautions are not observed, injury to bystanders and damage to property may result.
11. Prior to using the model ensure that you use fresh and fully charged batteries in the both the transmitter
(Tx) and the model/receiver (Rx). If the batteries are not fresh and charged up, loss of control over the model
may result. Loss of control over the model can cause injury or damage to property.
12. When disposing of used batteries or electronic components do so in compliance with your federal and
municipal guidelines that apply to the disposal of electronic waste.
13. Keep in mind that others in your vicinity may also be operating radio control models. If this is the case,
ensure that you are using a unique frequency. Not doing so may create interference and cause you or others
to lose control of your model(s), which may in turn lead to injury or damage to personal property.
14. If the model responds to control commands in a strange manner stop using the model immediately and
refrain from using the model again until the cause of the problem has been determined.
15. Keep your ngers, clothes and hair clear of the moving parts of the motor and model.
Caution
1. This product is not suitable for individuals 14 years of age and under. This is not a toy!
2. This kit contains a number of small parts which are fragile and may act as choking hazards. Please store and
assemble this model well out of the reach of small children.
3. Only use batteries of the same or equivalent type.
4. The supply terminals are not to be short-circuited.
5. Do not use new and old batteries together. Do not mix dierent brands or kinds of batteries.
6. Make sure to insert batteries with correct (+) and (-) polarity.
7. Do not short-circuit this model, this is potentially dangerous.
8. Do not disassemble and resolder this model or the radio.
9. Do not put ngers, hair or clothes into the shafts or rotating parts of the model.
10. NEVER LEAVE BATTERIES TO RECHARGE UNATTENDED!!
5
RADIO INFORMATION
This radio system is in compliance with part 95 of the F.C.C Rules. Operation is subject to the following two
conditions.
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.
Note: Unauthorized changes or modication to the transmitter and/or receiver may void the user’s authority to
operate the equipment. Refer to the label on the box, on the model, on the transmitter or in the instructions to
determine this model’s operational frequency. Never operate more than one model on any given frequency as
operational interference may occur.
BATTERY CHARGING PRECAUTIONS AND
GUIDELINES
This model is powered by a 7.4V LiOn battery pack (set includes). Please note that the ESCs on these models do
not support Li-Pol batteries or brushless motors. If you desire to upgrade your car you may replace the stock ESC
with a Li-Pol brushless power system. When charging carefully follow any instructions that may accompany your
battery and charger. Likewise please carefully review these precautions and safety guidelines to ensure a long
product life of your battery and reduce the risk of causing a re hazard.
Safety Precautions
1. Never charge batteries that have not been allowed to cool following use. Only charge batteries once they
are cool to the touch.
2. Never charge the battery pack while it is still inside the model. Make sure that there is free access to fresh air
to properly cool the battery and charger.
3. Never charge a battery pack that appears to be damaged.
4. Never disassemble or modify the battery pack.
5. Never disassemble or modify the charger.
6. Carefully follow the charging instructions in this manual, over charging your battery pack may cause it to
leak battery uid or cause a re hazard.
7. Never reverse the polarity while plugging in the charging lead.
8. Never leave your battery pack unattended while charging.
9. Never leave or store your battery pack with the charger connected to it.
10. Never use the charger or battery if the battery becomes very hot, emits an odor, leaks a uid, or shows signs
of deformation.
11. If battery uid touches your skin, ush it well with water, and then consult a doctor.
12. Never attempt to burn or incinerate this model or the battery pack.
13. When disposing of this model and/or battery pack tape the leads to prevent short circuiting, and take it to a
recycling center that is qualied to dispose of electronic waste and batteries.
14. Do not charge/discharge (use), store this model or battery pack at temperatures below freezing or above 45°C (113°F).
15. Charge the battery pack in a reproof location, well away from potentially ammable items.
6
www.pilotage-rc.com
PACKAGE CONTENTS
Pilotage Truggy Pilotage Monster
Width 320mm 320mm
Length 396mm 396mm
Height 200mm 200mm
Wheelbase 280mm 280mm
Weight (chassis with body) 1350g 1350g
Road Height 48,5mm 42mm
Front Tire Width 53,5mm 68mm
Rear Tire Width 53,5mm 68mm
Wheel Diameter 104mm 122mm
TECHNICAL SPECIFICATIONS
USER`S MANUAL
ИНСТРУКЦИЯ
Professional Transmitter Instructions
(Eng/Rus)
Li-ion
7,4V battery pack
Charger for 7.4V
battery pack
Fully pre-assembled chassis Pilotage Truggy
or Pilotage Monster
7
TOOLS AND MATERIALS REQUIRED FOR
ASSEMBLY AND MAINTENANCE
Assembling this model requires attention and care. Assembly order of this model is noted in the technical
drawings and/or photographs that supplement these instructions. When applying glue to your model, be sure
to do so in a location with regular and constant fresh airow. Though no further assembly is required to operate
your model, you should have the following items on hand to carry out further maintenance and/or upgrades to
your model.
1.5mm
2mm
Hobby Knife Philips Screwdrive (small)
Philips Screwdrive (large) Thread locker Instant (CA) Adhesive
Hex Wrench Set
Needle Nose Pliers
REQUIRED FOR OPPERATOIN
(SOLD SEPERATELY)
4pcs AA batteries
8
www.pilotage-rc.com
CHASSIS OVERVIEW
1. Bumper
2. Upper Suspension Arm
3. Turnbuckles
4. Clips
5. Drive Shaft
6. Battery Holder
7. Tire
8. Shocks
9. Body Mounts
10. Wheel
11. Steering Servo
12. Receiver (RX)
13. ESC (ELectronic Speed Controller)
14. On/O Switch
15. Motor
16. Chassis
17. Lower Suspension Arm
18. Shock Tower
1
9
10
11
12
13
14
15
16
17
18
2
3
4
5
6
7
8
9
RADIO OVERVIEW
Transimitter (Tx) Overview
Antenna
On/O Switch
Throttle Dual Rates
(TH. D/R)
Reverse Throttle (TH)
Reverse Steering (ST)
Steering Dual Rates
(ST. D/R)
Steering Control Wheel
Throttle Trigger
Throttle Trimmer
(TH.TRIM)
Steering Trimmer
(ST.TRIM)
Battery Compartment
Tx Function Overview
Antenna
The Antenna broadcasts control signals to the model.
Throttle Trim
This dial adjusts the throttles neural position to ensure that while in neutral the model stops, when the trigger
is pulled the model moves forward, and when released away from oneself the model breaks and the goes into
reverse.
10
www.pilotage-rc.com
Steering Trim
This dial adjusts the steering servo`s neutral position to ensure that the model runs in a straight line when in use.
Reverse
This switch allows one to reverse the servo functional directon of the steering or throttles controls.
On/O Switch
Turns the power on the Tx on and o.
Steering Dual Rates
This regulates the overall extent of travel in the steering servo. This allows you to preset how sharp your model
will turn and is instrumental for tuning your model for a given race track.
Steering Control Wheel
This wheel regulates the steering servo in your model which turns the front wheels.
Throttle Trigger
The Throttle Trigger controls the throttle. The speed of the model is proportional going forwards and backwards
to the extent that the trigger is depressed, or extended away from the pistol grip.
Battery Compartment
This holds the batteries that provide power to the Tx.
Throttle Dual Rates
This regulates the over all extent of the throttle settings going both forward and/or reverse. This is instrumental
in limiting top speed to ensure that the driver maintains control over the model.
11
START UP GUIDE
Prior to Operation
1. Charge the 7.4V Battery Pack
• Carefully review the battery pack specications.
• Fully charge the 7.4V battery pack in accordance with the instruction manual for your selected charger.
2. Tx Preparation
• Slide o the battery cover on the bottom of the Tx.
• Install 4pcs of fresh AA batteries. Be sure to follow the polarity diagram as illustrated in the inside of the
battery compartment. If polarity is not followed you risk damaging your battery cells and the electronic
components of the Tx.
3. Remove the Body
• Remove 4 body clips from the body retaining posts.
• Lift the lexan body o of the chassis.
12
www.pilotage-rc.com
4. Installation of the 7.4V Battery Pack
• Remove the clips from the battery retention plates.
• Remove the battery retention plates.
• Position the pack of batteries onto the designated platform on the chassis and connect the battery output
lead to the ESC as illustrated.
• Place the battery retention plates on top of the batteries and secure them into place with the provided clips.
5. Install the Body Back on the Model
• Place the body on the body mount posts.
• Secure the body in place with the clips.
FUNCTION CHECK AND MODEL SETUP
Turn “ON” Your Model
• Turn the Tx power switch to the “ON” position.
• Remove 4pcs body clips from the body retaining posts.
• Lift the lexan body o of the chassis.
• Turn the power switch on the model to the on” position.
• Replace the body on the model.
• Secure the body into place with the body clips.
13
Check the Tx and Car function
Rotate the control wheel forward or to the right if viewing the transmitter face. The wheels should turn to the
right (when the model is viewed from the rear).
Rotate the control wheel towards yourself or to the left when looking directly at the transmitter face. The wheels
should turn to the left (when the model is viewed from the rear). If the wheels move in the opposite direction
check the servo reversing settings on the Tx.
If needed, to reverse the steering servo control direction, move the steering reverse switch to the opposite
position.
14
www.pilotage-rc.com
Slowly and evenly squeeze the trigger on the Tx and the wheels on the model should drive the model forward.
Release the trigger on the Tx and the motor should idle and the car should gradually roll to a stop.
If needed, to reverse the throttle control direction, move the throttle reverse switch to the opposite position.
15
Extend the trigger on the Tx forwards. The wheels should rotate in the direction to drive the model backwards.
If prior to doing this, the model was traveling forward, the model’s breaks will activate rather than shifting the
model directly into reverse.
16
www.pilotage-rc.com
NOTE: This model has a reverse function. In order to protect the gears from stripping and becoming damaged
the model will not allow the model to go from forward directly into reverse. If moving forward, and then the
trigger is extending outward the breaks will rst engage until the model is brought to a halt. Then return the
throttle trigger to the neutral position and extend the throttle trigger outward again and the model will move in
reverse.
17
Electronic Speed Control
The stock electronic speed controller is specially matched with this model and requires no setup, programming,
or special calibration.
RUNNING YOUR MODEL
1. Check that the batteries in the Tx are fresh and/or fully charged.
2. Check that the battery pack for the model is fully charged.
3. Remove the body clips.
4. Remove the lexan body from the model.
5. Check that the switch on the model is in the o position.
6. Remove the clips from the battery retention plate.
7. Remove the battery retention plate.
8. Connect the battery output lead with the ESC input lead.
9. Position the battery onto the designated platform on the chassis.
10. Place the battery retention plate on top of the battery and secure it into place with the provided clips.
11. Turn the Tx “on.
12. Turn the model on.
13. Replace the body onto the model.
14. Your model is now ready to use.
DRIVING PRACTICE
Fundamentals
First try controlling your model at low speeds in the patterns as illustrated. Continue performing these patterns
until you feel comfortable with the controls of the model. Farmiliarize yourself with how the throttle and steering
commands perfom at various speeds. Once you feel comfortable at doing these patterns at higer speeds reverse
the direction. Once you have a solid grasp of the fundamentals can you start go to a track and participate in
wider rc events.
18
www.pilotage-rc.com
Cornering
• Prior to entering a corner smootnly reduce your speed to the point where the model maintains traction
and does not slide laterally while in a turn. While conrnering maintain the throttle to keep your RPMs up to
resume acceleration quickly once the cornering has been completled and so that tourqe on the wheels is
constantly present.
• Once the model has reduced its speed, evenly angel the model into the curve. Select a trajectory so that the
shapest pont of the inside edge of the curve is in the center of your models curve line as illustrated in the
diagrams above. This point is called the apex of the turn. Select a path so that the model will come closest
to the apex while maintaining as wide a turn radius as possible. Once the model passes the apex gradually
begin to streightn out the wheels and smoothly increase speed and prepair for your next turn in the course.
• Never make sharp or jerky motions while cornering. Doing so will only risk ipping your model or
signicantly reducing your speed while unessesarily cutting down on your intertia.
Jumping
• While performing jumps you can adjust your model’s orientation in the air.
• In order to lift the nose of your model while jumping, increase the rpms of your motor.
• In order to lower the nose of your model, activate the breaks while airborne.
• In order to slightly adjust the left/right trajectory of your model, turn the tires of the model in the desired
directon.
• When landing the wheels on the model should be straight.
In most cases jumps should be approached in the following manner:
• Build up enough speed to travel through the air between the jump gap.
• Hold the speed level stable while approaching the incline on the jump.
• Once the front tires touch the beginning of the incline drop the throttle and allow the intertia to carry the
model through the air.
• Once the jump is complete smoothly increase the throttle and continue on your way.
Advice when running on rough surfaces
When running on uneven surfaces keep your traction buy puming the throttle. Keep the RPMs of the model
constant but pump the gas to maintain the speed rather than holding a constand level on the throttle. You
should see immediate improvement due to this.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Pilotage Автомодель Monster ONE RTR 4WD 1/10 (RC16588) Руководство пользователя

Категория
Игрушки с дистанционным управлением
Тип
Руководство пользователя

Задайте вопрос, и я найду ответ в документе

Поиск информации в документе стал проще с помощью ИИ