Varta V-DV800BT Руководство пользователя

V-DV800BT

CD/MP3 receiver with Bluetooth CD/MP3- c  Bluetooth

Instruction manual 

V-DV800BT

2

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before

connecting, operating and/or adjusting the product and keep the manual for reference in the future.

Table of contents

Table of contents...................................................................................................................................................................................................... 2

Important safeguards...............................................................................................................................................................................................3

Accessories............................................................................................................................................................................................................... 4

Installation/connection ............................................................................................................................................................................................ 5

Panel controls.........................................................................................................................................................................................................10

Basic operations.....................................................................................................................................................................................................17

System menu operation.........................................................................................................................................................................................20

Dual zone operation...............................................................................................................................................................................................23

Tuner operation......................................................................................................................................................................................................25

RDS operations......................................................................................................................................................................................................26

CD/MP3/WMA operation.....................................................................................................................................................................................28

Multi-format disc...................................................................................................................................................................................................32

MPEG4 operations ................................................................................................................................................................................................33

USB operations......................................................................................................................................................................................................34

SD/MMC operations .............................................................................................................................................................................................35

DVD operation.......................................................................................................................................................................................................36

System setup menu................................................................................................................................................................................................42

Bluetooth Operation ..............................................................................................................................................................................................44

Handling discs........................................................................................................................................................................................................49

Cleaning .................................................................................................................................................................................................................49

Troubleshooting guide...........................................................................................................................................................................................50

Specification ..........................................................................................................................................................................................................51

V-DV800BT

3

Important safeguards

 Using the device at temperature below -10º may cause the breakage of the device. Before using please heat up the

passenger compartment to the recommended temperature!

 Read carefully through this manual to familiarize yourself with this high-quality sound system.

 Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.

 When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage

rating may cause serious damage to the unit.

 Do not attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.

 Do not use the unit in places where it can be exposed to water, moisture and dust.

 Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create safety

hazards such as electrical shock or laser beam exposure.

 If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes

normal before operating the unit.

 Do not open covers and do not repair yourself. Consult the dealer or an experienced technician for help.

 Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or during

a thunderstorm.

 Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual

sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified technician check

the system.

 Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or

burn out the power amplifier.

 Do not install the detachable panel before connecting the wire.

V-DV800BT

4

Accessories

 Receiver

 Remote control

 Steering remote control

 ISO connector

 Instruction manual

 Consumer information

 Warranty card

 2 x Removal/Release keys

 1 x 5 mm Nut

 1 x Spring washer

 1 x 12mm Screw

 1 x Mounting/Support strap

 1 x Plain washer

 USB extension cable

V-DV800BT

5

Installation/connection

Din front-mount (method 1)

 After inserting the holder into the dashboard, select the appropriate tab and bend

them inwards to secure the holder in place.

 Insert fingers into the groove in the front of frame and remove it.

 Insert the levers supplied with the unit to the grooves at both sides. The unit can

be installed or removed from the dashboard.

1. Dashboard

2. Spring washer

3. Screw (4 x 12 mm)

4. Screw

5. Strap

6. Plain washer

Removing the unit

 Insert fingers into the groove in the front of frame and pull out to remove the frame.

 When reattaching the frame, point the side with a groove down wards and attach it.

 Insert the levers supplied with the unit into the grooves at both sides of the unit as shown

in figure until they click. Pulling the levers makes it possible to remove the unit from the

dashboard.

frame

lever

V-DV800BT

6

Din rear-mount (method 2)

Installation using the screw holes at both sides of the unit.

1. Select a position where the screw holes of the main unit are fitted for aligned, and tighten the screws at 2 positions

at each side.

Use either truss screws (5 x 5 mm), depending on the shape of the screw holes in the bracket.

2. Screw.

3. Factory radio mounting bracket.

4. Dashboard or Console.

5. Hook (Remove this parts).

Note: The mounting box, outer trim ring and the half-sleeve are not used for this method of

installation.

V-DV800BT

7

Detach the unit

Removing the panel Attaching the panel

Note: DO NOT insert the D.C.P from the left side. Doing so may damage it. The D.C.P can easily be damaged by shocks.

After removing it, place it in a protective case and be careful not to drop it or subject it to strong shocks. When the release

button is pressed and the D.C.P is unlocked, the car's vibrations may cause it to fall. To prevent damage to the D.C.P,

always store it in a protective case after detaching it. Be careful not to damage it by pressing on it with fingernails, pens,

screwdrivers, etc.

Cleaning

If the D.C.P is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in isopropyl alcohol to clean

the socket on the back of the D.C.P.

Resetting the unit:

After releasing the front panel, use a pencil or any non-metallic object to press & hold the RESET button for five seconds

to reset the unit.

1. Attach the panel at the right side first, with point B on the main

unit touching point A on the D.C.P. (As shown on the diagram).

2. Then press the left side of D.C.P. onto the main unit until a “click”

sound is heard.

1. Turn the power off

2. Press the D.C.P. release button

3. Remove the D.C.P.

V-DV800BT

8

Electrical connections

V-DV800BT

9

Using the ISO Connector

1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated.

2. For connections without the ISO connectors, check the wiring in the vehicle carefully before

connecting, incorrect connection may cause serious damage to this unit.

Cut the connector, connect the colored leads of the power cord to the car battery as shown in the

color code table below for speaker and power cable connections.

Pin Wire color Function/Label

A4 Yellow Battery (+)

A5 Blue Power antenna

A7 Red Ignition (ACC)

A8 Black Ground

B1 Violet Right rear speaker (+)

B2 Violet/Black Right rear speaker (-)

 Grey Right front speaker (+)

4 Grey/Black Right front speaker (-)

5 White Left front speaker (+)

6 White/Black Left front speaker (-)

7 Green Left rear speaker (+)

8 Green/Black Left rear speaker (-)

V-DV800BT

10

Panel controls

Front panel

1. POWER/MUTE button

2. VOLUME knob/AUDIO/ENTER button

3. TA button

4. BAND/ERASE/CLEAR button

5. PAU/1 number button

6. STOP/2 number button

7. RPT/3 number button

8. RDM/4 number button

9. FOLDER UP/5 number button

10. FOLDER DOWN/6 number button

11. PREVIOUS button

12. NEXT button

13. PTY/X-BAS button

14. AF/SUB-W button

15. USB slot

16. EJECT button

17. MENU/DISP button

18. AS/PS/OSD button

19. DISC slot

20. AV in (AUX in)

21. OPEN button

22. MODE/TRANSFER button

V-DV800BT

11

Remote controller (RC)

1. POWER/MUTE button

2. EJECT button

3. AUDIO button

4. MODE (TRANSFER) button

5. VOLUME + button

6. VOLUME - button

7. 2-ZONE ON/OFF button

8. FAST FORWARD /TUNE UP button

9. FAST REWIND /TUNE DN button

10. Cursor LEFT button

11. Cursor RIGHT button

12. Cursor UP button

13. Cursor DOWN button

14. NEXT/SEEK UP button

15. PREVIOUS/SEEK DN button

16. OK button

17. PLAY/PAUSE button

18. STOP button

19. 1 number button

20. 2 number button

21. 3 number button

22. 4 number button

23. 5 number button

24. 6 number button

25. 7/SUB-W number button

26. 8 button

V-DV800BT

12

27. 9/IX-BASS number button

28. 0/BAND number button

29. +10 button

30. DVD MENU/PBC button

31. SET UP button

32. REPEAT button

33. ZOOM button

34. DVD OSD button

35. GOTO button

36. SUBTITLE button

37. TITLE button

38. DVD AUDIO button

39. ANGLE button

40. DISPLAY/MENU button

V-DV800BT

13

Battery information of RC

1. Press the catch and at the same time pull out the battery tray.

2. Insert the 1 x lithium battery, type CR 2025 3V battery with the stamped (+) mark facing upward.

Insert the battery tray into the RC.

Warning: Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a doctor

immediately.

Do not recharge, short, disassemble or heat the battery or dispose it in a fire.

Do not expose or bring into contact the battery with other metallic materials. Doing this may cause the battery to give off

heat, crack or start a fire. When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery

may give off heat, crack or start a fire.

V-DV800BT

14

Steering wheel remote control (SRC)

Important safeguards

 Install this SRC as required by this manual. Failure to do so may cause an accident.

 Do not install this SRC near the doors where rainwater is likely to be spilled on the unit. Incursion of water into the

SRC may cause smoke or fire.

 Do not install this SRC in such a place as may obstruct the drive’s view.

 Since interior layout differs depending on the type of vehicle, the ideal installation location for the SRC also differs.

When installation the SRC, select the location that assures optimum transmission of signals from the SRC to the car

stereo.

Mounting

V-DV800BT

15

Operation buttons

1. MUTE button

2. BAND button

3. NEXT/PREVIOUS buttons

4. A (AUDIO) button

5. EJ (EJECT) button

6. DISP button

7. VOLUME+/VOLUME- buttons

8. PLAY/PAUSE button

9. MODE button

Battery changing

In order to ensure proper functioning of the steering wheel remote control, please

make sure only use Lithium CR2025 Battery.

If the receiver being controlled no longer responds to any key press even under favorable

circumstances please replace the battery of the remote control.

 Remove the remote control from the steering wheel.

 Push the battery compartment lid on the back of the remote control in direction of the gap and

open the battery compartment.

 Remove the old battery, and replace with 1 new lithium battery.

V-DV800BT

16

WARNING:

 Avoid installing this SRC in such a location where the operation of safety devices such as airbags is prevented by

this SRC.

 Avoid installing this SRC in such a location where the operation of the steering wheel and the gearshift lever may be

prevented. Otherwise, it may result a traffic accident.

 Fix this SRC securely to the steering wheel with the belt attached to the SRC. If this SRC is loose, it disturbs driving

stability, which may result in a traffic accident.

 Do not attach this SRC to the outer circumference of the steering wheel. Otherwise, it disturbs driving stability,

causing a traffic accident. Always attach this SRC to the inner circumference of the steering wheel as shown.

V-DV800BT

17

Basic operations

Loading a CD

Insert a CD into the disc slot, the CD will be automatically loaded and playback will begin.

Ejecting a CD

Press EJECT button to eject a CD. If the ejected CD is not being removed, after 10 seconds it will be reloaded

automatically.

Power ON/OFF

Press POWER button or any other button on the front panel (except OPEN/EJECT) to turn the unit on. Press and hold

POWER button to turn the unit off.

Mute

Press POWER button on the unit or MUTE button to mute the audio volume, and “Mute” will be on the display. Press

these buttons again to restore volume to the previous setting.

Sub-woofer (SUB-W)

Press and hold AF/SUB-W button to activate the sub-woofer function, and “Subwoofer on” will appear on the display for

3 seconds. Press and hold the button again to turn off the sub-woofer function.

Note: Please refer to the related description in "Audio Menu of Sub-woofer" for details operation of the Sub-woofer

control.

The Subwoofer Level and Low Pass Filter control will only appear in the Audio Menu only if the Subwoofer function is

currently activated.

V-DV800BT

18

iX-bass

Press and hold PTY/X-BASS button to turn on the X-Bass function, and "ix-Bass ON" will appear on the display for 3

seconds. Press and hold X-Bass button again to turn this function off.

Please refer to the related description in "Audio Menu of X-Bass" for details operation of X-Bass control. The X-Bass

Boost Level control will only appear in the Audio Menu only if the X-Bass function is currently activated.

Mode

Press MODE button to select a different mode of operation as indicated on the display panel. The modes are: TUNER,

CDP, AV-in 1, AV-in 2.

A/V input

Connect the external device to A/V in jack located on the front panel, then

press MODE button to select AUX mode. Press MODE button again to exit

A/V Mode and select other mode.

Note: The unit is only support the 3.5mm A/V Jack Pin Assignment shown as

diagram.

Volume

To increase the volume, rotate VOLUME knob clockwise or press VOLUME+/VOLUME- buttons on the RC. To

decrease the volume, rotate the knob counterclockwise. When volume is adjusted, the volume level will be shown on the

display panel as a number ranging from 0 (lowest) to 46 (highest).

Display

Press the DISP/MENU button repeatedly to select the following different Display options: Spectrum mode 1 > Spectrum

mode 2 > Spectrum mode 3 > Default Display. The selected display will appear in the display when the unit is turned on.

Default Display True Spectrum Analyzer mode 1 True Spectrum Analyzer mode 2 True Spectrum Analyzer mode 3

V-DV800BT

19

Reset

To Reset the Main Unit System

After releasing the front panel, use a pencil or any non-metallic object to press and hold RESET button

for 5 seconds to reset the main unit; the unit will return to the factory default settings.

To Reset the DVD Setting

Press SET UP button on the RC or press and hold AS/PS button to bring up the Setup Menu; select “Misc” then select

“Use default settings”, the DVD Setting will resume to factory default value.

V-DV800BT

20

System menu operation

You can adjust the system setting in this unit by entering into the system menu, please read the below details operation for

each system menu items:

Access into System Menu Function List

Press and hold DISP/MENU button for more than 3 seconds to enter the system menu items. Navigate through the menu

items by repeatedly pressing DISP/MENU button to move to the next or previous option. Once the needed option appears

on the display, Rotate the VOLUME knob or press VOL+/VOL- buttons to adjust the setting. Press DISP/MENU or OK

to confirm and go to the next entry.

System Function Menu

Contrast

The contrast level of the display is set at “CONTRAST 05” by default. Adjust the contrast level from 00 to 10.

Clock Format

This option allows the selection of 12 hour or 24 hour time display format. “12 Hour” is the default setting.

Time Set

The time of the clock will be set to 12:00 as the default. Press VOLUME+ button or rotate VOLUME knob clockwise to

adjust minutes; press VOLUME - button or rotate VOLUME knob anticlockwise to adjust hours.

Local or Distance Select

This feature is used to designate the strength of the signals at which the radio will stop during automatic tuning.

“Distance” is the default, allowing the radio to stop at a broader range of signals. To set the unit to select only strong local

stations during automatic tuning, rotate the VOLUME knob or press VOL+/VOL- buttons to select “Local” mode.

Region

REGIONAL “OFF” will be displayed by default. If “On” is selected, then during an AF search or PI seek, it will

implement to station, which have all the PI codes, which are the same as the current station. If “Off” is selected, then

Страница загружается ...

Varta V-DV800BT Руководство пользователя

Varta V-DV800BT Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов