SoundMax SM-CCR5701M Руководство пользователя

SM-CCR5701M

USB/SD МЕДИАПЛЕЕР С 7” МОТОРИЗИРОВАННЫМ TFT-ДИСПЛЕЕМ,ТВ-ТЮНЕРОМ И

BLUETOOTH

Руководство по эксплуатации

USB/SD MEDIA PLAYER WITH 7” MOTORIZED TFT-DISPLAY, TV-TUNER AND

BLUETOOTH

Instruction manual

2

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully

before connecting, operating and/or adjusting the product and keep the manual for reference in the future.

Table of contents

Important safeguards ...................................................................................................................... 3

Accessories...................................................................................................................................... 4

Installation/Connections ................................................................................................................. 5

Panel controls................................................................................................................................ 13

General operations ........................................................................................................................ 16

Bluetooth ....................................................................................................................................... 19

Radio operations ........................................................................................................................... 21

TV tuner operations ....................................................................................................................... 23

USB/SD operations ........................................................................................................................ 24

Steering wheel control (SWC) ....................................................................................................... 26

Smartphone mirroring by HDMI ..................................................................................................... 27

Cleaning ........................................................................................................................................ 28

Troubleshooting guide ................................................................................................................... 29

Specifications ................................................................................................................................ 30

3

Important safeguards

• Read carefully through the manual to familiarize yourself with this unit.

• Keep this manual handy as a reference for operating procedures and precautions. Do not allow persons who have not

read through this manual to use this unit.

• Do not allow this unit to come into contact with liquids. Electrical shock could result. Also, damage to this unit, smoke,

and overheating could result from contact with liquids or dust. Protect this unit from moisture.

• Make sure that foreign objects do not get inside the unit; they may cause malfunctions, or create safety hazards such

as electrical shock or laser beam exposure.

• The beginning of operation is the moment of the unit installation. Before use the device in winter it is recommended to

heat up the passenger compartment during 20 seconds or to the operation temperature.

• Using the unit with the temperature that goes beyond the operation temperature greatly decreases the operation

resource of the screen and other components of the unit and can result in an outage.

• Disconnect the vehicle’s negative battery terminal while mounting and connecting the unit.

• The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please ensure it

before installation.

• When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage

rating may cause serious damage to the unit.

• Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or

burn out the power amplifier.

• Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or during a

thunderstorm.

• Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual

sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Let a qualified technician check the

system.

• Always keep the volume low enough so that you can hear sounds from outside the vehicle.

• Should this product fail to operate properly, contact your dealer or nearest service center.

4

Accessories

1. Media player 1 pc

2. Front panel 1 pc

3. Remote controller 1 pc

4. ISO connector 1 pc

5. AV harness 1 pc

6. Mounting parts:

Mounting sleeve 1 pc

Trim frame 1 pc

Release key 2 pcs

Metal strap 1 pc

Bolt 1 pc

Screw 1 pc

Nut M5 1 pc

Flat washer 2 pcs

Spring washer 2 pcs

7. Consumer information 1 pc

8. Warranty card 1 pc

9. Instruction manual 1 pc

5

Installation/Connections

• Choose the mounting location where the unit will not interfere with the normal function of the driver.

• Before finally installing the unit, connect the wiring and make sure that the unit works properly.

• Consult with your dealer if installation requires drilling of holes or other modifications of the vehicle.

• Install the unit where it does not get in the driver’s way and cannot injure the passenger if there is a

sudden stop, like an emergency stop.

• If installation angle exceeds 30° from horizontal, the unit may not perform properly.

• Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or

from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.

1. Metal strap

2. Screw

3. Bolt

4. Flat washer

5. Spring washer

6. Nut (5mm)

7. Sleeve

8. Trim frame

6

Mounting

1.

Install the sleeve into the dashboard; ensure it is installed with the correct side and there are no

obstacles (wires, dashboard elements, etc) for the unit installation.

2.

After installing the sleeve into the dashboard, bend tabs fitting to the size of the dashboard to fix the

sleeve in place.

3.

Use the metal strap to fix the rear side of the unit. Determine a place for fixing and install the strap as

shown in the picture. You can bend the strap to the needed angle with your hands.

Make the necessary wire connections. Ensure the connections are correct.

Install the unit into the sleeve until the side locks are fixed.

The device is distinguished by a high degree of output. During operation, this results in a strong heat

generation. Therefore no cables or other parts may adjoin the device. If their insulation melts, there

is the risk of a short circuit or fire.

7

Removing

1. Switch off the unit and detach the front panel.

2. Insert your fingers into the groove in the front side of the trim frame (apply some effort to detach the frame).

Pull the frame to detach it.

3. Insert the supplied release keys into the both sides of the unit body to click, as shown in the picture. To

extract the unit from the dashboard, pull the release keys or the unit body to pull it out. Before detaching the

unit, ensure it is not fixed with the metal strap.

Trim frame installation

To install the trim frame, press it to the unit body and push it to fix it in place. This should be done before

installing the front panel; otherwise you are not able to install the trim frame. When the trim frame being

installed, the side with the groove should face down and fixed first.

Detachable control panel

Insert the right lockers on the receiver into the right grooves of the panel, and then press on the left part of

the panel until a click. Ensure the panel is fixed properly.

To detach the front panel, press RELEASE button. Detach the right part of the panel from the locker.

The control panel can be easily damaged by shocks. After removing it, place it in a protective case and be

careful not to drop it or subject it to strong shocks. The rear connector that connects the main unit and the

control panel is an extremely important part. Be careful not to damage it by pressing on it with fingernails,

pens, screwdrivers, etc.

8

If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in

isopropyl alcohol to clean the socket on the back of the control panel.

Anti-theft system

The front panel of this unit can be carried away when you leave the vehicle to deter theft.

Switch off the power of the unit. Detach the front panel and take it with you.

9

Connection diagram

10

Using the ISO Connector

1. If your car is equipped with the ISO connector, then connect the ISO connectors

as illustrated.

2. For connections without the ISO connectors, check the wiring in the vehicle

carefully before connecting, incorrect connection may cause serious damage to

this unit.

Cut the connector, connect the colored leads of the power cord to the car battery as

shown in the colour code table below for speaker and power cable connections.

Location

FUNCTION

Connector A

Connector B

1

Rear right speaker (+)/Purple

-

2

Rear right speaker (-)/Purple-Black

-

3

Front right speaker (+)/Grey

-

4

Front right speaker (-)/Grey-Black

Battery 12V (+)/Yellow

5

Front left speaker (+)/White

Antenna power/Blue-White

6

Front left speaker (-)/White-Black

Panel light/Orange-White

7

Rear left speaker (+)/Green

ACC+/Red

8

Rear left speaker (-)/Green-Black

Ground/Black

Power antenna wire is intended for power supply of the antenna and for remote control of an additional

amplifier.

11

Parking wire connection

If Parking cable is connected to hand brake switch, the video display of the TFT monitor will be controlled by driving status,

system setup and input video sources.

Reverse driving cable connection

If the rear view video camera is connected, the unit automatically switches to CAMERA source during reverse driving. The

unit returns to the original work mode after the reverse driving is done.

12

AV Input

The AV Input jack is a set of composite inputs on the rear of the unit. Press the MOD button to choose AUX.

You can use it to connect any portable audio/video devices such as a DVD player or VCD player to the unit.

Refer to the Connection diagram for more details.

Backup Camera Input

The backup camera input is on the back of the unit. (refer to the wiring diagram). This input (in yellow) is

for connecting backup camera for parking. You must connect the VCC wire (purple-white) to the reverse gear

switch in order to activate this video input mode when you switch the reverse gear of your car. Please refer to

the wiring diagram for more details.

Video Output

The Video out jack (in yellow) is for connecting monitor(s). You must connect a car monitor in order to

operate this unit in another monitor. Consult your dealer for any kinds of monitors that are suitable to use in

car.

RCA Output (2 sets)

The RCA out jacks are for connecting amplifiers, equalizers, or other audio components that require a pre-

amp out connection. (Red=Right, White=Left) Follow the manufacturer’s instructions for the audio component

that you are connecting.

Subwoofer Output

The Subwoofer Out jack (in green) is for connecting up to 2 subwoofer amplifiers. Follow the amplifier’s

installation instructions.

13

Panel controls

Front panel

1. TFT display

2. POWER/TFT OFF button

3. UP/DOWN buttons

4. TILT button

5. OPEN button

6. Volume knob/SELECT button

7. Microphone

8. IR sensor

9. 1-6 buttons

10. LCD display

11. USB port (under plastic cover)

12. PREVIOUS/NEXT buttons

13. AUX input

14. MOD button

15. SD/MMC card slot

16. RESET button (hole)

14

Remote controller

1. Power On/off

2. Mode Switch Button

3. Stop Playback

4. Navigation Up

5. Navigation Left

6. Enter Button

7. Change The Audio Output Method

8. Navigation Down

9. Band/Select Type

10. Auto Preset Scan/Repeat Play

11. Tuning/Music Selection (numeric key)

12. Mute Sound Button

13. Time Clock Display/Statistical Disc

Information Display Button

14. VOL +

15. Play/Pause Function

16. Sound Select Button

17. Navigation Right

18. VOL -

19. Subtitle Language Switching Key

20. Next Track/Next Radio Station

21. Previous Track/Previous Radio Station

22. GO TO Button (track selection)

23. Aspect Ratio Button

15

Changing the battery

1. Press the catch and at the same time pull out the battery tray (pic. 1).

2. Insert the 1 lithium battery, type CR2025 (3V) battery with the stamped

(+) mark facing upward. Insert the battery tray into the remote controller

(pic.2).

Warning:

Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a

doctor immediately.

Do not recharge, short, disassemble or heat the battery or dispose it in a fire.

Do not expose or bring into contact the battery with other metallic materials. Doing this may cause the

battery to give off heat, crack or start a fire.

When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may give

off heat, crack or start a fire.

Please direct the Remote controller to the IR sensor of the front panel.

Pic. 1

Pic. 2

16

General operations

Touch screen

The touch screen enables you to carry out most functions not only by pressing buttons but also by touching

the options you need.

Turning the unit on/off

Press POWER/TFT OFF button on the panel or button on the RC to turn the unit on. Press and hold the

button to turn the unit off.

Sliding out the monitor

Press the TILT button so that the monitor will slide out automatically and the main GUI display will show up.

Press the TILT button again so that the screen will go back in the chassis.

Please do not adjust the monitor tilt manually, otherwise it can get damaged

Angle of the screen

Press the UP/DOWN arrow buttons so that the screen will tilt up or down. There are 4 steps for tilting

(ANGLE 0-4).

Reset the unit

Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press reset

button on the unit with a pointed object (such as a ballpoint pen) to set the unit to initial state.

When some errors occur on the display, you can also press reset button to resume to normal, and it will

erase the clock setting and some memorized functions.

17

TFT display on/off

When the unit is on, press POWER/TFT OFF button on the panel to switch off the display. When the display is

off, the video out signal will be available so that the connected monitor will show the screen of the unit. Press

this button again to resume the image.

Mode selection

• Press repeatedly MOD button on the panel or MODE button on the RC to select among Radio, USB,

Memory Card, auxiliary input (AUX), TV, Bluetooth and HDMI operation modes. Modes of operation are

indicated on the display. Memory card and USB modes are not available unless a memory card or USB device

is connected.

Audio parameter setting

Press SELECT button on the panel or SEL button on the RC repeatedly to select a parameter: VOL (volume)

=> BASS (bass) => TRE (treble) => BAL (balance) => FAD (fader). Rotate VOLUME knob on the panel or

pressing V+/V- buttons on the RC to adjust each mode:

• Volume: from 0 to 39;

• Bass/Treble: from -7 to 7;

• Balance: L7 (left) to R7 (right);

• Fader: from R7 (rear) to F7 (front);

Additional audio settings

You can adjust other audio settings like preset equalizer, loudness or subwoofer ON/OFF by tapping the

“EQ” icon on the main menu, or on the control menu of other audio/video play modes.

EQ: POP/ROCK/CLASSIC/OFF equalizer modes;

• Loudness: select ON or OFF. Activating this feature will enhance bass and treble frequencies when

listening to music at low volumes.

18

When equalizer is in any mode except OFF, bass and treble are not adjustable.

AUX input

AUX-in jacks on the front panel and on the back as part of the AV harness (red=right, white=left) are

intended for connecting external audio equipment. If connection is made correctly, the audio signal from the

external source will be translated through the acoustics of the head unit. This enables to adjust volume and

quality of sounding. For example, you can connect an MP3-player to listen to tracks using the car acoustic

system.

System setup

Enter the setup menu in the home screen by tapping the “SETTING” icon on the main menu. Tap the items

you would like to set. You can adjust audio, date and time, language, calibration, etc.

19

Bluetooth

PAIRING

At BT mode, search bluetooth device by the phone and “BT CAR STEREO” will appear in your phone. Input

“0000” as password to establish connection.

DIAL PAD

Touch the dial pad to dial the number you would like to call. Touch the CALL (green) button to send the

number.

CALL RECORD

Press the HISTORY button to enter the phone book page to view received, missed and dialed calls. More

details in the next page.

A2DP

Press the MUSIC button to enter the A2DP page to control playing music of your cellphone. More details in

the next page.

REJECT CALL

Press the REJECT (red) button to end the call or to reject an incoming call.

RETURN TO USER INTERFACE

Touch the arrow key on the top right corner to return to the main user interface.

VIEW RECEIVED CALLS

20

Touch the RECEIVED CALLS button, the received calls will be displayed. There will be up/down arrows

displayed for you to view them one by one.

VIEW MISSED CALLS

Touch the MISSED CALLS button, the missed calls will be displayed. There will be up/down arrows displayed

for you to view them one by one.

VIEW DIALED CALLS

Touch the DIALED CALLS button, the dialed calls will be displayed. There will be up/down arrows displayed

for you to view them one by one.

PLAYING MUSIC ON YOUR CELLPHONE

After activating music player in the cellphone and selecting “Play via bluetooth”, touch PLAY/PAUSE to play or

pause the music. Touch PREVIOUS or NEXT to select down or up one song in your song list.

Страница загружается...

SoundMax SM-CCR5701M Руководство пользователя

Похожие модели бренда

Модели других брендов