SoundMax SM-CDM1041 Руководство пользователя

SM-CDM1041

CD/MP3-RECEIVER CD/MP3-

Instruction manual 

2

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual

carefully before connecting, operating and/or adjusting the product and keep the manual for

reference in the future.

Table of contents

TABLE OF CONTENTS ...........................................................................................2

IMPORTANT SAFEGUARDS ....................................................................................3

INSTALLATION/CONNECTIONS ..............................................................................4

CONNECTION SCHEME .........................................................................................8

ACCESSORIES.....................................................................................................9

PANEL CONTROLS................................................................................................10

GENERAL OPERATIONS.........................................................................................12

RADIO OPERATIONS ............................................................................................15

RDS FUNCTION....................................................................................................16

OTHER FUNCTIONS..............................................................................................18

CD/MP3/WMA OPERATIONS ..................................................................................19

MIXED-CD OPERATIONS ....................................................................................... 22

AUX IN OPERATIONS............................................................................................22

SD/MMC CARD OPERATIONS................................................................................. 22

USB DEVICE OPERATIONS ....................................................................................23

MP3 OVERVIEW ...................................................................................................25

ESP FUNCTION ....................................................................................................26

ANTI-THEFT SYSTEM............................................................................................26

HANDLING COMPACT DISCS .................................................................................26

CLEANING...........................................................................................................27

TROUBLESHOOTING GUIDE ..................................................................................28

SPECIFICATION ...................................................................................................29

3

Important safeguards

 Read carefully through the manual to familiarize yours with this high-quality sound system.

 Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.

 When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with

a higher amperage rating may cause serious damage to the unit.

 Do not attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to

the eyes.

 Make sure that pins or other foreign objects do not get inside the unit; they may cause

malfunctions, or create safety hazards such as electrical shock or laser beam exposure.

 Do not use the unit in places where it can be exposed to water, moisture and dust.

 If you have parked the car for a long time in hot or cold weather, wait until the temperature in

the car becomes normal before operating the unit.

 Do not open covers and do not repair yourself. Consult the dealer or an experienced technician

for help.

 Make sure you disconnect the power supply and aerial if you will not be using the system for a

long period or during a thunderstorm.

 Make sure you disconnect the power supply if the system appears to be working incorrectly, is

making an unusual sound, has a strange smell, has smoke emitting from it or liquids have got

inside it. Have a qualified technician check the system.

 The unit is designed for negative terminal of the battery, which is connected to the vehicle

metal. Please confirm it before installation.

 Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it

may overload or burn out the power amplifier.

 Do not install the detachable panel before connecting the wire.

4

Installation/Connections

First complete the electrical connections, and then check them for correctness. If you are not

confident working with electrical wiring, removing and reinstalling interior panels, carpeting,

dashboards or other components of your vehicle, please call your dealer in order to have the unit

professionally installed.

Before installing the unit, please remove two screws on the top.

Before the installation

1. Remove the old unit from the dashboard.

 Remove the outer trim frame.

 Insert the keys supplied with the unit into both sides of the unit as shown in figure below until

they click. Pull to remove the old unit from the dashboard. Do not disconnect wires at this time!

2. Mark polarity of the speaker wires.

Marking the polarity of the speaker wires will make it easier to connect the existing speakers to your

unit. Consult wiring diagram of existing head unit before disconnecting any wires. If you are not

positive of the polarity of the existing wires from the speakers to the head unit, install new wires.

 While the old unit is playing, disconnect the wires from one speaker.

 Take a length of masking tape and fold it around the wire so it forms a flag.

 On the masking tape mark the polarity of the speaker wires (+ & -), as well as left or right, and

front or rear.

 Repeat this procedure for all of the speakers.

 Mark the power, ground, and any other wires also.

5

Installation method A

 After inserting the holder into the dashboard, select

the appropriate tab and bend them inwards to secure

the holder in place.

 Insert fingers into the groove in the front of frame and

remove it.

 Insert the levers supplied with the unit to the grooves

at both sides. The unit can be installed or removed

from the dashboard.

6

Installation method B

Note: Outer trim frame, hook, and mounting sleeve are not

used for this installation.

This is only intended as a general guide; contact the

vehicle's manufacturer for specific instructions.

This method of installation uses the screw holes at the sides

of the unit and the holes of the existing vehicle mounting

bracket.

1. Align the screw holes of the mounting bracket supplied

with the car and the screw holes of the main unit. Tighten

the 2 screws on each side of the unit. Then fasten the

brackets to the car.

2. Attach wires of the unit to existing speaker wires. See

wiring diagram.

7

To detach the front panel

The front panel of the unit may be removed as a theft deterrent. After removing the front panel, use

the case provided to keep the front panel from getting damaged.

1. Press OPEN button to flip down the front panel.

2. Pull of the front panel.

3. Store the front panel in the protective case provided for safekeeping.

To attach the front panel

Hold the right side of the front panel with the plate facing down.

First attach the left side of the front panel to the unit by inserting the hole

into the left holder. Then slightly push it leftwards and attach the right side

hole into the right holder. Finally push up the front panel.

8

Connection scheme

Notes:

 In spite of having any kinds of speaker system, must use 4 ohms impedance of speaker to

reduce the distortion during high volume level.

 Prohibit to make the conductors of auto antenna and ground touch with each other.

9

Accessories

 Name pcs

1 Hexagon nut M5 T (3.5 mm) 1

2 Mounting box (0.6 mm) 1

3 Left key (1.0 mm) 1

4 Right key (1.0 mm) 1

5 Metal bar (0.8 mm) 1

6 ISO connector 1

7 Plain washer =5 mm 1

8 Carrying case 1

9 Outer trim ring 1

10 Spring washer =5 mm 2

11 Screw 5X5 mm 4

12 Screw 5X25 mm 1

13 Screw M5 5X29.3 mm 1

14 Customer information 1

15 Warranty card 1

16 Instruction manual 1

10

Panel controls

Front panel

1. AMS button

2. EQ button

3. MOD button

4. BAND/LOUD button

5. PREV button

6. No 1/PLAY/PAUSE button

7. No 2/SCN button

8. No 3/RPT button

9. No 4/SHF button

10. No 5 button

11. No 6 button

12. TA button

13. AF/REG button

14. PTY button

15. AUX in jack

16. USB socket

17. OPEN button

18. EJECT button

19. LCD display

20. Disc clot

21. VOL knob/SEL button

22. NEXT button

23. DISP button

24. POWER button

11

Inner panel

Press OPEN button on the front panel

to flip it down.

25. SD/MMC-card slot

26. Light indicator

27. RESET button

12

General operations

Power button

Press any button (except OPEN) or insert disc to switch the unit on. Press the POWER button to

switch the unit off.

Volume control

Rotate the VOL knob on the front panel to adjust volume level.

Audio settings adjustment

Press SEL button until the display shows: VOL => BAS => TRB => BAL => FAD. Rotate the VOL

knob to adjust each mode.

Press SEL button for 2 seconds to enter the menu mode. Press it repeatedly to choose the needed

item: TA SEEK/ALARM => PI SOUND/MUTE => RETUNE L/S => MASK DPI/ALL => BEEP

2nd/ALL/OFF.

 TA (Traffic Announcement) mode

To determine what action will the radio take if the newly tuned station does not receive TP

(Transport Program) information for 5 seconds. Rotate the VOL knob to select the desired mode:

TA ALARM and TA SEEK.

- TA SEEK

When newly tuned station does not receive TP information for 5 seconds, the radio retunes to

next station which has not the same station (PI – Program Information) as the last station, but

has the TP information. When TP information gets lost at the current station for retune time

which is set by RETUNE SHORT (30 seconds) or RETUNE LONG (90 seconds), the radio starts to

retune to next same PI station. When same PI station does not catch in 1 cyclic search, the

radio retunes to next station with TP information.

- TA ALARM

During searching the radio does not retune but the double beep sound (alarm) is output.

 PI SOUND/MUTE

13

Choose PI sound or mute. PI sound refers to the reception noise when the AF function tries to

scan alternative frequency.

 RETUNE mode

To determine the initial time of automatic TA (Traffic Announcement) search.

There are 2 modes: RETUNE L and RETUNE L.

- RETUNE L: 90 seconds.

- RETUNE S: 30 seconds.

Note: Retune mode is active for TA SEEK mode only.

 MASK mode

During AF search, PI stations and non-RDS (Radio Data Station) stations with strong signal will

be masked, in the latter case, the non-RDS stations may cause interference, resulting the real

AF to be masked due to the misjudgment of the radio under interference. Rotate the VOL knob

to select the desired mode: MASK DPI and MASK ALL.

- MASK DPI

To mask only the AF with different PI.

- MASK ALL

To mask both PI and strong signal non-RDS station.

 BEEP mode

BEEP 2nd: the unit beeps only when any allowed double button is pressed longer than 1 sec.

BEEP ALL: the unit beeps when any button is pressed.

BEEP OFF: the beep is disabled.

Mode selection

Press MOD button to choose RADIO, AUX, CD, SD or USB source.

Loudness control

Press and hold BAND/LOUD button to turn the LOUD function ON or OFF. This function reinforces the

bass output.

Information display

Press DISP button to operate as the conversion of each display mode as follows:

14

- In case of receiving a RDS station

In radio mode: PS -> CT -> FREQ -> P TY

In CD mode: CD -> CT -> (ID3 TAG) -> PS -> FREQ -> PTY

* In case of no receiving CT or PTY Information, the display shows as “NO CLOCK” or “NO PTY”.

- In case of receiving a non RDS station

In radio mode: “NO CLOCK” -> FREQ-> ”NO PTY”

In CD mode: CD -> “NO CLOCK” -> FREQ -> “NO PTY”

Each displaying time is several seconds, and come back to 1'st position after several seconds.

Notes: CT = clock time; FREQ = frequency.

Equalizer setting

Press EQ button to choose between the EQ sound effects: FLAT => CLASSICS => POP M => ROCK

M => DSP OFF.

15

Radio operations

Band selection

Press the BAND/LOUD button repeatedly to select your desired radio band during RADIO mode:

FM1, FM2, FM3, MW1.

Automatic memory storing

Press AMS button for 2 seconds, the radio searches from current frequency and checks the signal

strength until one cycle is finished. And then 6 strongest stations are stored into the corresponding

preset number button.

Selecting station

Press preset 1-6 button to select the station, which had been stored in the memory.

Press the PREV/NEXT button for 2 seconds until “MANUAL” appears on the display, and then press

the PREV/NEXT button to select a station. If both buttons have not been pressed for several

seconds, they will return to automatic seek mode.

Program scanning

Press AMS button shortly to scan preset station.

Station storing

Press PREV/NEXT button to activate automatic seek mode.

In manual mode, press PREV/NEXT button to select station. Press preset 1-6 button for 2 seconds to

store current station into the number button.

16

RDS function

Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS

service is not available in you area, the following service is not available, either.

Press AF/REG button to switch ON or OFF RDS function.

Setting RDS mode

Whenever RDS is switch on, symbol “AF” appears on the display. Program name is displayed on

receiving a RDS station. “AF” starts blinking if the broadcasting signals getting worse. “ALARM” will

be displayed when an emergency broadcasting is received; meanwhile sound output level will be

adjusted to the preset output level automatically when the volume control is set at minimum.

Regional Program Operation

Press AF/REG button for 2 seconds to switch on or off region mode. Some broadcasting stations

change their program from normal broadcasting to regional broadcasting for a certain time period.

When region is on, the current listening program remains unchanged. When region is off, it allows

the reception to move to the regional station.

Using PTY to Select Program

Press the PTY button repeatedly to select the PTY as follows: PTY MUSIC GROUP => PTY SPEECH

GROUP => GROUP PTY OFF.

When the PTY MUSIC GROUP or PTY SPEECH GROUP has been selected, press any of the preset

numbered buttons repeatedly to search relevant PTY information. And stop searching if the radio

detects the PTY relevant information. If the relevant PTY information is not found, the radio exits the

PTY engagement and return to previous normal mode.

When you the select PTY MUSIC GROUP, the preset numbered buttons are shared as follows:

Button Program

No1/PLAY/PAUSE POPM, ROCKM

17

No2/SCN EASYM, LIGHT M

No3/RPT CLASSICS, OTHER M

No4/SHF JAZZ, COUNTRY

No5 NATION M, OLDIES

N06 FOLK M

When you select the PTY SPEECH GROUP, the preset numbered buttons are shared as follows:

Button Program

No1/PLAY/PAUSE NEWS, AFFAIRS, INFO

No2/SCN SPORT, EDUCATE, DRAMA

No3/RPT CULTURE, SCIENCE, VARIED

No4/SHF WEATHER, FINANCE, CHILDREN

No5 SOCIAL, RELIGION, PHONE IN

N06 TRAVEL, LEISURE, DOCUMENT

Listening to Traffic Announcement

Press TA button to turn on  mode and a traffic announcement is transmitted:

This unit is equipped with the latest technology of EON control, so that when you are listening to

Radio or CD, if there is any travel announcement from a nearby local station, the radio will already

know the frequency of that radio station. Then it will receive the station, turn up the volume, or

interrupt the playback of the music for the duration of the announcement. At the end of the

announcement the radio will return to its previous state ready for the next announcement.

Local/distance

Press TA button for several seconds, to select EON  LOCAL/EON TA DISTANCE mode. If you want

to receive information from local stations only, select EON  LOCAL mode. Otherwise, select EON

TA DISTANCE mode.

PI, PS, TP, TA, AF, EON

18

PI: Program Identification Code – for identifying code.

PS: Program Service Name Broadcast – station name data expressed in alphanumerically character.

TP: Traffic Program Identification – for traffic information broadcasting station.

TA: Traffic Announcement Identification – showing traffic information is being transmitted or not.

AF: Alternative frequencies – frequency list of broadcasting station transmitting the same program.

Choose EON  LOCAL if the transmitter is located near the your receiver, otherwise choose EON TA

DISTANCE.

EON: Enhanced Other Networks E EON. Broadcasting information on PI, AF, TP, TA, etc, relating to

networks other than the network used for current reception

Other functions

TEL mute

The audio system automatically mutes whenever a call comes in.

Note: This function will not work if a cable is not connected to the car phone.

1. When a call comes in

When a call is received, “TEL CALL” is displayed and all the unit functions are temporarily

interrupted.

2. When the call ends

Hang up the phone, “TEL CALL” disappears from the display. The original source (used before the

phone call) is returned automatically and the volume restored gradually.

Reset function

RESET button is pressed with either a ballpoint pen or thin metal object. RESET function is to be

activated for the following reasons:

 Initial installation of the unit when all wiring is completed.

 All the function buttons do not operate.

 Error symbol on the display.

19

CD/MP3/WMA operations

This unit can play disc types: CD/CD-R/-RW. Compatible with formats: MP3/WMA.

Loading/Removing the disc

Insert the disc into the disc slot with the printed side facing up; the unit will play the disc

automatically. Press EJECT button to eject the disc.

Switching to CD/MP3/WMA mode

When a disc is inserted in the unit, press MOD button to switch to the CD/MP3/WMA mode.

Selecting tracks in single step

Press PREV button to play the current track from the beginning. Press again to skip to the previous

track. Press NEXT button to play the following track. Press and hold PREV or NEXT button to fast

reverse or fast forward. To resume normal playback, release the button.

Pause playback

Press No1/PLAY/PAUSE button to pause a disc playing. Press it again to resume playback.

Previewing all tracks

Press No2/SCN button to play first several seconds of each track on the current disc. Press it again

to stop intro scan and listen to track.

Repeat track

Press No3/RPT button to set the unit to repeat the same track. Press it again to stop the repeat

function.

Random playback

Press No4/SHF button to play all tracks on the disc in a random order. Press again to cancel this

function.

20

Selecting directory up/down

Press No5 or No6 button to select directory downward or upward. If the MP3/WMA disc does not

contain any directory, these buttons are not functional.

Searching file and directory

Press AMS button repeatedly to cycle through the following search modes: Searching by track

number => Searching by directory or file name => Searching from current directory => Searching

from root directory.

1. Searching by track number

Press button AMS button once to enter “Searching by track number” mode. The track number will

blink on the display. Rotate VOL knob to select the track number. Press BAND/LOUD button to

confirm the selection and play the selected song

2. Searching directory or file name

Press AMS button twice to enter “Searching directory or file name” mode. In this search mode you

can press the corresponding buttons listed on the table below:

Button Character Button Character

No1/PLAY/PAUSE A, B, C, 1 MOD S, T, U, 7

No2/SCN D, E, F, 2 PREV V, W, X, 8

No3/RPT G, H, I, 3 NEXT Y, Z, space, 9

No4/SHF J, K, L, 4 DISP or POWER _, -, +, 0

No5 M, N, O, 5

N06 P, Q, R, 6

Rotate VOL knob A-Z, 0-9, _, -, +

Press SEL button to confirm entry of each character. Press BAND/LOUD button to search the title. If

inputted directory or file name does not exist, “NO FOUND” is shown on the display.

If the selected title is a directory name, the display will show “D-DIR”. You can rotate VOL knob to

list all songs under this directory and select the title. Press BAND/LOUD to confirm and start

playback. Repeat the above steps if the selected title is a directory.

Страница загружается ...

SoundMax SM-CDM1041 Руководство пользователя

SoundMax SM-CDM1041 Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов