Hyundai CDM8063 Руководство пользователя

H- CDM8063

MP3/CD/CD-R/CD-RW/USB/SD/MMC - RECEIVER Instruction manual

MP3/CD/CD-R/CD-RW/USB/SD/MMC -  

2

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting,

operating and / or adjusting the product and keep the manual for reference in the future.

Table of contents

Table of contents .......................................................................................................................................................................2

Important safeguards ................................................................................................................................................................. 3

Installation/Connections ............................................................................................................................................................ 4

Panel controls............................................................................................................................................................................ 7

Button tips............................................................................................................................................................................... 10

USB/SD/MMC MP3 playback................................................................................................................................................. 11

Menu Function ........................................................................................................................................................................ 13

MP3 Play back ........................................................................................................................................................................ 16

MP3 Overview ........................................................................................................................................................................ 17

MP3 Character Search............................................................................................................................................................. 19

RDS (Radio Data System) ....................................................................................................................................................... 20

Anti-Theft System................................................................................................................................................................... 23

Handling compact discs........................................................................................................................................................... 24

Cleaning.................................................................................................................................................................................. 24

Components ............................................................................................................................................................................25

Troubleshooting guide............................................................................................................................................................. 26

Specification ........................................................................................................................................................................... 27

3

Important safeguards

· Read carefully through this manual to familiarize yourself with this high-quality sound system.

· Use only in a 12-volt DC negative-ground electrical system.

· Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.

· When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage rating may

cause serious damage to the unit.

· DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.

· Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create safety hazards such as

electrical shock or laser beam exposure.

· If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before

operating the unit.

· Keep the volume at a level at which you can hear outside warning sounds (horns sirens, etc.).

· DO NOT open covers and do not repair yourself. Consult the dealer or an experienced technician for help.

· Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or during a

thunderstorm.

· Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual sound, has a

strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified technician check the system.

· DO NOT raise the volume level too much, as this will block outside sounds, making driving dangerous.

· Stop the car before performing any complicated operation.

4

Installation/Connections

First complete the electrical connections, and then check them for correctness.

Installation opening

This unit can be install in any dashboard having an opening as shown below. The dashboard should be 4.75  5.56 mm thick in order

to be able to support the unit.

1. Insert mounting collar into the dashboard, and bend the mounting tabs out with a screwdriver.

Make sure that lock lever is flush with the mounting collar (not projecting outward).

2. Secure the rear of the unit.

After fixing mounting bolt and power connector, fix the rear of the unit to the car body by rubber cushion.

3. Insert trim plate.

When you prepare to insert trim plate, please check its direction. Once it was up side down, it cannot be fixed.

5

Electrical connections

Do not interchange the connection of the wiring!!!

For some car models you may need to modify wiring of the supplied power cord as illustrated (modified wiring), or else the memory of

the unit may be lost after you power off. Contact your authorized car dealer before installing this unit.

6

Using the ISO Connector

1.If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated.

2.For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting, incorrect connection may

cause serious damage to this unit.

Cut the connector, connect the colored leads of the power cord to the car battery as shown in the color code table below for speaker and

power cable connections.

Location FUNCTION

Connector A Connector B

1 Rear Right(+)---Purple

2 Telephone  mute / pink Rear Right(-)---Purple/Black Stripe

3 Front Right(+)---Gray

4 ACC+/red Front Right(-)---Gray/Black Stripe

5 Auto Antenna/blue Front Left(+)---White

6 Front Left((-)---White/Black Stripe

7 Battery 12V (+)/yellow Rear Left(+)---Green

8 Ground/black Rear Left(-)---Green/Black Stripe

7

Panel controls

8

1. Power on: press any button on the panel except to turn on the unit. Press more than 2 seconds to power off.

2. Multi-Control.

Press to select VOL/BAS/TRE/BAL/FAD, rotate the Multi-Control to adjust level.

Press more than 2 seconds to Menu mode.

MP3 track / file search.

3. Band switch: FM1 – FM2 – FM3 – FM(OIRT) – AM1 –AM2.

4, 5 Radio tune/ Track seek.

To fast search within a track/skip to next or previous track

6. AF (Alternative Frequencies) button.

7. TA (Traffic Announcement) button.

8. PTY (Program Type) button.

9. LCD screen.

10. Panel release.

11. SD/MMC card slot.

12. iPod, USB connector.

13. Radio preset. Hold for more than 2 seconds to store station.

14. MP3 track +10 up.

15. MP3 track 10 down.

16. Track random play.

17. Track repeat play.

18. Intro play (10 seconds).

19. Play/pause. Top play (press more than 2 seconds).

20. AMS: Radio preset scan/Radio Audio scan/SEARCH: MP3 track/ file search.

21. Radio/Disc play (when disc is in)/AUX-in (optional)/USB drive (when inserted)/MEM card (when inserted).

22. Display switch.

23. Mute: press again to cancel.

9

24. Disc eject.

25. Slot for disc.

26. RESET Button. Press the Reset button with a pointed object to reset the unit to the original status. Press the RESET button will

erase the clock setting and stored stations.

27. Panel status indication:

When the panel slide down it will light up.

When the panel detached from body it will flash.

10

Button tips

Disc load/eject

Load: press to flip down the panel. Insert the disc into the slot.

Eject: Press to flip down the panel. Press to eject the disc.

Radio

To fine tune the radio, press or briefly.

To search the station automatically, press or for more than 0.5 second

Disk playback

Track skip: press or briefly to go to the next or previous track.

Track seek: press or for more than 0.5second to seek the forward or previous track.

AMS: Auto Memory Store

Press briefly to scan the preset station 1-6 for 5 seconds each. Hold more than 2 seconds, the 6 strongest available station

will be automatically saved in the memory of preset button 1-6.

Viewing Clock Time During Radio/Disc Playback

Press DISP (once for Radio mode or twice for other modes),display shows the clock time after 5 seconds.

Set clock

Press DI SP button, time displays. Press again more than 2 seconds, time display blinks. Rotate the Multi-Control clock wise to set

hours. Rotate the Multi-Control counter-clockwise to set minutes. Press DISP again to exit the clock setting.

11

USB/SD/MMC MP3 playback

1.Loading SD/MMC Card

Insert the SD/MMC card into the slot, with the front side at right.

The unit will display the music automatically and the LCD will show MEM-CARD.

2.Take out SD/MMC Card

Push SRC button and switch to non MEM-CARD mode, then push SD/MMC card, take out the card when part of the card flip up.

3.Loading USB equipment

Open the rubber cap, put the USB into the connector the head unit will display the music, stored in the USB equipment, and the LCD

will show USB-DRIV.

4.Take out USB equipment

Push the SRC button and switch to non USB-DRIV mode, then take off the USB equipment, close the rubber cap.

12

USB/SD/MMC Notes:

USB functions (flash memory type) MP3 music play

(1) SD/MMC card support

(2) USB flash memory 2in1 (SD/MMC) support

(3) Fat 12/fat16/fat32 is possible

-fat 12/16 (dir: 200 support, file:500 support), -fat 32 (dir: 200 support, file:500 support)

(4) Filename: 32 byte /dir name: 32byte

(5) Tag (id3tag ver2.0)

- title/artist/album: 32byte support

(6)Multi card reader not support

(7) USB 1.1 support, USB 2.0 support (it cannot support USB 2.0 speed. Just, tag name:32byte get be same speed with USB 1.1).

Note:

USB format supports 1.1

SD cards brands: Cannon, Fujifilm, Palm, Motolora, Microsoft, IBM, HP, Compaq, Sharp, Samsung, etc. Capacity : 8MB ~ 512MB

MMC cards brands: Ericsson, Nokia, Motolora, HP, Palm, Sanyo, Microsystems, etc. Capacity : 16MB ~ 128MB

13

Menu Function

Press the control more than 2 seconds to enter menu mode, then each press changes the mode as follows:

TA mode  MASK mode  RETUNE mode  DSP mode  LOUD ON / OFF mode  WOOF ON/OFF  ESP mode MULT ON

/ OFF BEEP ON / OFF SEEK1/2 mode (only in tuner mode)  ST / MO mode (only in FM mode)  LOCAL / DX mode (only

in tuner mode).

TA mode

Rotate the Multi-Control to choose TA ALARM or TA SEEK mode, When TA is turned on and no traffic program identification code

has been received during the specified time, no TA/TP is displayed and either TA ALARM or TA SEEK is activated.

TA ALARM mode

Alarm is turned on.

TA SEEK mode

TA SEEK is activated.

MASK mode

Rotate the Multi-Control to choose MASK DPI or MASK ALL mode.

In some cases, the AF function may be influenced by some interference, example shared signals with strong field but without the RDS

data. For this reason, the unit has two options to avoid the above interference.

MASK DPI mode

Only the AF which has different program identification is masked.

MASK ALL mode

The AF which has different program identification and NO RDS signal with high field strength is masked.

14

RETUNE mode

Rotate the control to choose RETUNE-S or RETUNE-L

RETUNE-S or RETUNE-L is time length selection of TA SEEK retune interval.

RETUNE-S: short, TA SEEK retune interval is 45 seconds.

RETUNE-L: long, TA SEEK retune interval is 180 seconds.

Remark: RETUNE mode functions for TA during TA SEEK mode only.

DSP mode

Rotate the Multi-Control to choose DSP sound effect. POP ROCK CLASSIC FLAT DSP OFF

LOUD mode

Rotate the Multi-Control to choose loud on or off.

Woofer mode

Rotate the Multi-Control to choose subwoofer on or off.

ESP 40/120s

ESP40: Selected as CD-ESP time 40 seconds.

ESP120: Selected as CD-ESP time 120 seconds.

MULT ON/OFF mode

Multi Session ON/OFF. (Multi session OFF: mixed CD, ONE session CD; Multi session ON: Mixed, Extra, multi session CD).

BEEP ON/OFF mode

Rotate the Multi-Control to choose button beep sound on or off.

15

SEEK 1/2 mode

Rotate the Multi-Control to choose radio seek mode 1 or 2.

SEEK 1: searching station will stop when next station is received.

SEEK 2: searching station will stop when or button is released and next station is received.

LOCAL/DX mode

Rotate the Multi-Control to choose tuner sensitivity local or distant.

ST/MO mode

Rotate the Multi-Control to choose FM stereo or mono.

16

MP3 Play back

While playing MP3 disc/USB/SD/MMC-MP3 music, the folder/file name and ID3 TAG (song title, album and artist) can entirely

scroll displayed on the LCD display. You can press the BAND button to see ID3 information.

Elapsed playing time and Track number  Folder name and number  File name and number 

Song title  Album title  Artist name.

MP3 Track search

Press AMS button to select "TRACK SCH" mode.

Press the Multi-Control and LCD display will show "001".

IF your desired track number is less than 100, rotate the Multi-Control to select the first digit and press the Multi-Control

once again, and rotate the Multi-Control to set the tenth digit of the track number. Press the Multi-Control again more

than 0.5 seconds to play the track.

IF your desired track number is more than 100, rotate the Multi-Control to select the first digit and press the Multi-Control to confirm,

rotate the Multi-Control to select the tenth digit and press the Multi-Control to confirm, rotate the Multi-Control to select the

hundredth digit and press the Multi-Control to confirm, press the Multi-Control again to play the track.

Note:

· If the track number you enter is beyond the maximum file number, last song will be played.

MP3 File search

Press AMS button twice to select "FILE SCH" mode. Press the Multi-Control to enter.

Rotate the Multi-Control to select folder.

IF you just want to play songs of this folder, press the Multi-Control more than 0.5 seconds to play the first track of the folder.

IF you want to play desired track of the folder, press the Multi-Control and rotate the Multi-Control to select the track you want. Press

the Multi-Control again to play the track.

17

MP3 Overview

Notes on MP3

· MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard.

· This product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs.

· The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support the MP3 data written by

the method of packet write.

· The unit can not read an MP3 file that has a file extension other than .mp3.

· If you play a non- MP3 file that has the .mp3 extension, you may hear some noise.

· In this manual, we refer to what are called MP3 file and folder in PC terminology as track and album, respectively.

· Maximum number of directory level is 128, including the root directory. Maximum number of files and folders per disc is 477.

· The unit may not play tracks in the order of Track numbers.

· The unit supports all MPEG bitrate including free format for MPEG1 audio layer 3, supports all MPEG bitrate except 8kbps and

free format for MPEG2 audio layer3 .

· The unit supports 32/44.1/48 kHz sampling rate for MPEG1 audio layer 3, 32/44.1/48 kHz and 16/22.05/24 kHz sampling rate for

MPEG2 audio layer 3, and 44.1 kHz sampling rate for VBR (Variable Bit Rate).

18

Notes on creating your own CD-Rs or CD-RWs containing MP3 files

· To enjoy high quality sound, we recommend converting to MP3 files with a sampling frequency of 44.1 kHz and a fixed bit rate of

128 kbps.

· DO NOT store more than 477 MP3 files per disc.

· For ISO 9660 - compliant format, the maximum allowable depth of nested folders is 8, including the root directory (folder).

· When CD-R disc is used, playback is possible only for discs, which have been finalized.

· Make sure that when MP3 CD-R or CD-RW is burned that it is formatted as a data disc and NOT as an audio disc.

· You should not write non-MP3 files or unneeded folders along with MP3 files on the disc otherwise it takes a long time until the

unit starts to play MP3 files.

· With some CD-R or CD-RW media, data may not be properly written depending on their manufacturing quality. In this case, data

may not be reproduced correctly. High quality CD-R or CD-RW disc is recommended.

· Up to 16 characters are displayed for the name of an Album or a Track. ID3TAG version 1.x and 2.x is required.

· Note that the unit may not play Tracks in the order that you wrote them to the disc.

19

MP3 Character Search

Press AMS button three times to select "CHAR SCH" mode.

Press the Multi-Control and  displayed.

Now if press the Multi-Control more than 0.5 seconds. which first character of its name is will be played.

Rotate the Multi-Control to select the 1st character of the desired track name and press the Multi-Control to confirm.

Then  flash at the next place, select 2nd and other character of the desired track name as steps above.

Press the Multi-Control more than 0.5 seconds to play the track of the select name.

Example :to search character ECHO

20

RDS (Radio Data System)

RDS service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not

available, either. The following functions are available when receiving RDS stations.

RDS Basics

AF( Alternative Frequency list )

When reception is poor, an RDS station broadcasting the same program is tuned in automatically.

Enabling the AF function will allow the unit to automatically search another station with the same PI (program identification) as the

current station but with stronger signal strength.

PS Display ( Program Service name )

The name of station is displayed instead of frequency.

AF Mode

Press AF button less than 1 second to switch AF mode on and off.

AF indication on LCD will flash until RDS information is received.

REG Mode

Press AF button more than 1 second to switch REG mode on and off.

The frequency is changed only for programs within the region.

The frequency is changed also for programs outside the region.

CT Service (Clock Time)

When receiving an RDS station, the CT ( Clock Time ) service automatically adjusts the time.

NO CT is displayed in areas where CT service is not available.

Страница загружается...

Hyundai CDM8063 Руководство пользователя

Похожие модели бренда

Модели других брендов