SoundMax SM-CDM1050/G Руководство пользователя

SM-CDM1050

CD/MP3-RECEIVER CD/MP3-

Instruction manual 

2

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this

manual carefully before connecting, operating and/or adjusting the product and keep the manual

for reference in the future.

Table of contents

Table of contents..........................................................................................................2

Instruction manual for CD/MP3-RECEIVER .......................................................................3

Important safeguards....................................................................................................3

Installation/ Connections ...............................................................................................4

Accessories................................................................................................................ 10

Panel controls............................................................................................................. 11

Menu Function............................................................................................................ 14

MP3 Play back............................................................................................................ 17

Anti-Theft System....................................................................................................... 20

Handling compact discs ............................................................................................... 21

Cleaning.................................................................................................................... 21

Troubleshooting guide................................................................................................. 22

Specification .............................................................................................................. 23

Instruction manual 13 cm 2 way coaxial acoustic system................................................. 24

Description ................................................................................................................ 24

Important safeguards.................................................................................................. 25

Mounting the speakers ................................................................................................ 26

Securing the speakers................................................................................................. 27

If unit fails to operate properly..................................................................................... 28

Specification .............................................................................................................. 29

3

Instruction manual for CD/MP3-RECEIVER

Important safeguards

 Read carefully through the manual to familiarize yours with this high-quality sound system.

 Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.

 When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse

with a higher amperage rating may cause serious damage to the unit.

 Do not attempt to disassemble the unit. Laser beams from the optical pickup are dangerous

to the eyes.

 Make sure that pins or other foreign objects do not get inside the unit; they may cause

malfunctions, or create safety hazards such as electrical shock or laser beam exposure.

 Do not use the unit in places where it can be exposed to water, moisture and dust.

 If you have parked the car for a long time in hot or cold weather, wait until the temperature

in the car becomes normal before operating the unit.

 Do not open covers and do not repair yourself. Consult the dealer or a technician for help.

 Make sure you disconnect the power supply and aerial if you will not be using the system for

a long period or during a thunderstorm.

 Make sure you disconnect the power supply if the system appears to be working incorrectly,

is making an unusual sound, has a strange smell, has smoke emitting from it or liquids have

got inside it. Have a qualified technician check the system.

 The unit is designed for negative terminal of the battery, which is connected to the vehicle

metal. Please confirm it before installation.

 Do not allow the speaker wires to be shorted together when the unit is switched on.

Otherwise it may overload or burn out the power amplifier.

 Do not install the detachable panel before connecting the wire.

4

Installation/ Connections

Din front-mount (method 1)

 After inserting the holder into the dashboard, select the appropriate tab and bend them

inwards to secure to the place

 Insert fingers into the groove in the front of frame and remove it.

 Insert the levers supplied with the unit to the grooves at both sides. The unit can be

installed or removed from the dashboard.

5

1. Dashboard

2. Nut (5mm)

3. Spring washer

4. Screw (5 x 25mm)

5. Screw

6. Strap

7. Plain washer

Din rear-mount (method 2)

Installation using the screw holes at both sides of the unit.

1. Select a position where the screw holes of the main unit are fitted for aligned, and tighten the

screws at 2 positions at each sides.

Use either truss screws (5 x 8mm) or flush surface screws (4 x 8mm), depending on the

shape of the screw holes in the bracket.

6

Pic. 1

2. Screw

3. Factory radio mounting bracket.

4. Dashboard or Console

5. Hook (Remove this parts)

Note: The mounting box, outer trim ring, and the Half-sleeve are not used for this method of

installation.

Detachable control panel

Detaching the control panel

1. Press the OPEN button on the front panel. The panel will go down (pic. 1).

2. Push the panel to the left and then pull it towards you (pic. 2).

Pic. 2

Pic. 3

7

Attaching the control panel

1. Insert the left side of the control panel into the main unit (pic. 3).

Note: the control panel must be attached into the T-Joint.

2. Press the right side of the control panel until a “click” sound is heard.

3. Close the panel.

Caution:

DO NOT insert the control panel from the right side. It can damage the control panel.

The control panel can easily be damaged by shocks. After removing it, place it in a protective

case and be careful not to drop it or subject it to strong shocks.

The rear connector that connects the main unit and the control panel is an extremely important

part. Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.

Note:

If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab

soaked in isopropyl alcohol to clean the socket on the back of the control panel.

8

Electrical connections

Notes:

 In spite of having any kinds of speaker system, must use 4 ohms impedance of speaker to

reduce the distortion during high volume level.

 Prohibit to make the conductors of auto antenna and ground touch with each other.

9

Using the ISO Connector

1. If your car is equipped with the ISO connector, then connect the ISO connectors as

illustrated.

2. For connections without the ISO connectors, check the wiring in the vehicle carefully before

connecting, incorrect connection may cause serious damage to this unit.

Cut the connector, connect the colored leads of the power cord to the car battery as shown in

the colour code table below for speaker and power cable connections.

Location

FUNCTION

Connector A Connector B

1 Rear Right(+)---Blue

2 Rear Right(-)---Blue/White Stripe

3 Front Right(+)---Grey

4 Battery 12V (+)/yellow Front Right(-)---Grey/White Stripe

5 Auto Antenna/Orange Front Left(+)---Green

6 Panel light/White Front Left((-)---Green/White Stripe

7 ACC+/red Rear Left(+)---Brown

8 Ground/black Rear Left(-)---Brown/White Stripe

10

Accessories

 Name pcs

1 Hexagon nut M5 T (3.5 mm) 1

2 Mounting box (0.6 mm) 1

3 Left key (1.0 mm) 1

4 Right key (1.0 mm) 1

5 Metal bar (0.8 mm) 1

6 ISO connector 1

7 Plain washer =5 mm 1

8 Carrying case 1

9 Outer trim ring 1

10 Spring washer =5 mm 2

11 Screw 5X5 mm 4

12 Screw 5X25 mm 1

13 Screw M5 5X29.3 mm 1

14 Customer information 1

15 Warranty card 1

16 Instruction manual 1

11

Panel controls

1. OPEN BUTTON

2. VOL KNOB / SEL BUTTON

Rotate it clockwise to increase the volume level; rotate anticlockwise to decrease the volume

level.

Press it repeatedly to select the mode: VOL => BAS => TRE => BAL => FAD

Rotate VOL knob to adjust each mode.

Push more than 2 seconds to Menu mode.

MP3 track/ file/ character search

ESP 45s/120s

3. LOC button

Press to select: LOCAL or DISTANCE.

12

4. Display

5. / buttons

In Disc mode press the buttons shortly to go to previous/next track. Press and hold them to

start fast backward/ forward rewind. In Radio mode press the buttons shortly to search the

stations manually. Press and hold for 2 seconds to start searching the stations automatically.

6. MUTE BUTTON

Press it to switch the sound off/on

7. MON button

Press to select: STEREO or MONO.

8. BAND

In radio mode press it to select desired band.

9. CLK button

In radio mode press it to select desired band.

10. Disc playback: Play/ Pause. Top play (press more than 2 seconds).

11. Disc playback: Intro play (10 seconds).

Press this button to play the first 10 seconds or each track. Press this key again to clear this

mode.

12. Disc playback: Track repeat play.

Press this button to repeat the same track continuously. "RPT ON." will appear on the display.

Press this key again to stop repeating.

13. Disc playback: Track random play.

Press this button to play all the tracks in random order. "RDM ON" will appear on the display.

Press this key again to stop random play.

14. Disc playback: MP3 track – 10 down.

15. Disc playback: MP3 track + 10 up.

16. F/PS button: automatic scan/Store.

13

17. Loudness button.

18. MODE button

Press it to select the mode: TUNER => DISC => AUX.

19. Power on: press any button on the panel except OPEN to turn on the unit. Press more than 2

seconds to power off.

20. Number buttons

Inner panel

Press the OPEN button on the front panel to flip it down.

1. LED INDICATOR

2. RESET BUTTON

3. DISK SLOT

4. EJECT BUTTON

14

Menu Function

Press the POWER button to turn the unit on, the display will show a message to indicate

it is ready to use. Press the BAND for the radio mode, press MODE to select between Aux, Radio

mode and CD/MP3 play. Press the POWER button again to turn the unit off.

VOLUME CONTROL

A. The volume level can be adjusted at any time by rotating the audio level VOL knob as select

mode has been initially defaulted at volume mode.

BASS CONTROL

A. Press the SEL button to select the bass mode until BAS appears on the display.

B. Press the VOL knob to adjust the bass effect.

TREBLE CONTROL

A. Press the SEL button to select the treble mode until TRE appears on the display.

B. Press the VOL knob to adjust the treble effect.

BALANCE CONTROL

A. Press the SEL button to select the balance mode until BAL appears on the display.

B. Press the VOL knob to increase or decrease the sound level of left or right speaker.

FADER CONTROL

A. Press the SEL button to select the fader mode until FAD appears on the display.

B. Press the VOL knob to increase or decrease the sound level of front or rear speaker.

BEEP ON/OFF mode

Press SEL button for 2 seconds, the display will show DSP OFF.

Press the SEL button continuously until the display show BEEP ON, press the volume up/down

button to toggle between it and BEEP OFF, then leave the unit idle for your desired setting to

take effect.

15

LOUD mode

Press the LUD to emphasize the Bass output, the word LOUD ON shows on the display indicates

that the loudness function is on. Press again to cancel.

Time clock setting

The time clock can be set anytime when the power is on.

Press the CLK button and then press and hold CLK button for 3 seconds, the time will blink on

the display.

1. Rotate the volume knob clockwise to adjust the hour.

2. Rotate the volume knob anti-clockwise to adjust the minute.

3. Press the CLK button again or left the unit idle for new setting to effect.

Press the CLK button anytime to view the time clock display.

DSP mode

Press and hold the SEL button for 2 seconds, the display will show DSP OFF. Press the volume

up/down button to choose EQ effect.

POP ROCK CLASSIC FLAT DSP OFF

After you have reached your desired effect, leave the unit idle in order for the new setting to

take effect.

Choose Radio Band

Press the BAND button to operate the radio function. (Even when CD is playing)

Total 3 sets of FM Band (FM1, FM2)

Total2 sets or MW Band (MW1, MW2)

Each set of the band can be stored up to 6 preset stations, making total 30 preset memory

stations.

16

Radio Tune/ Seek Function

In Radio Mode, press and hold / buttons for more than 3 second to manually adjust the

radio frequency.

Rotate volume knob for less than 1 second, the radio will seek to the next up or down strong

and clear frequency station. Repeat this action to seek for other desired stations.

Save Your Preset Stations

There are Six numbered preset buttons which can store and recall stations for each band. There

are 5 bands and 30 available preset stations slot. 3 FM bands, F1, F2, and F3 making a total of

18 preset stations in FM band. 2MW bands, MW1 and MW2 making a total of total 12 preset

stations in MW band.

Automatic Store / Preset Scan

(1) AUTOMATIC SCAN & STORE

Press "F/PS" button for more than 3 seconds, the receiver will automatically scan and

save stations for the 3 FM bands.

(2) RESET

Press "F/PS" button for less than 1 second, the receiver will reset the station setting to the

default. User has to scan and save all the stations again.

Track - Forward / Fast Forward

Press  button to advance disc to the next track, the track numbers will be shown on the LCD

display. Press and hold the button to fast forward. Disc will play normal when the button is

released.

Tracks - Backward / Fast Backward

Press  button to backward disc to the previous track, the track numbers will be shown on the

LCD display. Press and hold the button to fast backward. Disc will play normal when the button

is released.

17

MP3 Play back

CD Electronic Shock Protection 12or 45 seconds

The electronic shock protection is ideal for driving uneven road.

Press the Sound Select button for 2 seconds, the display will show "DSP OFF". Press the

button again so that "ESP 12" will be shown on the display indicating that Electronic Shock

Protection for 12 seconds will be activated.

When the display shows "ESP 12", rotate the volume knob so that the setting will be changed to

"ESP 45", indicating that Electronic Shock Protection for 45 seconds is activated. Please leave

the unit idle for the new setting to take effect.

MP3 Electronic Shock Protection

This unit is built-in with 120 seconds of electronic shock protection for Mp3 so that you can

better enjoy your music.

MP3 TRACK SEARCH

This unit is capable of displaying ID3 tag which is used in MP3 operation. When the CD media is

playing the unit will show the information of folder, file name, song name, artist name and

album name for you to better enjoy the music. You can make use of the 4 search modes to play

your favorite Mp3 songs.

(1) ORDINARY SEARCH

Press the up/down track button to choose your song. Press the 5 and 6 button to advance

10 songs up/down.

(2) TRACK SEARCH

Press the "F/PS" Button and the display will show "TRK SCH". At this moment, press the Sound

Select Button so that "TRK" Will blink on the display. Then rotate the encoder volume to choose

your desired track and press the sound select button all the way down to confirm the track. The

input track will be searched and play.

(3) FILE SEARCH

Press the "F/PS" Button twice and the display will show "FILE SCH". At this moment, press

the Sound select button so that the current folder will be shown. Rotate the encoder volume

18

to choose your desired folder and press all the way down to confirm. The input folder will be

searched and play.

(4) CHARACTER SEARCH

Press the "F/PS" Button for three times and the display will show "CHAR SCH". This is for

searching the computer file names of the Mp3 songs. At this moment, press the Sound Select

Button so that the letters will blink on the display. Rotate the knob to select the character and

press once to advance to the next. After you have input the name, press the select button all

the way down to confirm. The song nearest to your input name will be searched and play.

Notes on MP3 and WMA

 MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard.

 This product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs.

 The unit can read MP3 files written in the format compliant with ISO 9660. However it does

not support the MP3 data written by the method of packet write.

 The unit can not read an MP3 file that has a file extension other than “.mp3”.

 If you play a non- MP3 file that has the “.mp3” extension, you may hear some noise.

 In this manual, we refer to what are called “MP3 file” and “folder” in PC terminology as “track”

and “album”, respectively.

 Maximum number of directory level is 8, including the root directory. Maximum number of

files and folders per disc is 256.

 The unit may not play tracks in the order of Track numbers.

 The unit plays only the audio tracks if a disc contains both audio tracks and MP3 files.

 When playing a disc of 8 kbps or “VBR”, the elapsed playing time in the display window will

not be correct and also the intro play may not function properly. “VBR”: Variable Bit Rate.

 The unit supports the playback of WMA files. The playback of ID3 tags for WMA format is not

guaranteed, it depends on versions and availability of Cyrillic alphabet.

19

 WMA (Windows Media Audio) – music data compression format, created by Microsoft

Corporation. This format uses coding algorithm for compression of initial audio-record, greatly

decreasing the file size, but, saving the good sound quality even when the bit rate is low (for

example, 64 Kbit/s).

 Remember that the unit may not play the tracks in order they are written on disc.

Notes on creating your own CD-Rs or CD-RWs containing MP3 files

 To enjoy high quality sound, we recommend converting to MP3 files with a sampling frequency

of 44.1 kHz and a fixed bit rate of 128 kbps.

 DO NOT store more than 256 MP3 files per disc.

 For ISO 9660 - compliant format, the maximum allowable depth of nested folders is 8,

including the root directory (folder).

 When CD-R disc is used, playback is possible only for discs, which have been finalized.

 Make sure that when MP3 CD-R or CD-RW is burned that it is formatted as a data disc and

NOT as an audio disc.

 You should not write non-MP3 files or unneeded folders along with MP3 files on the disc

otherwise it takes a long time until the unit starts to play MP3 files.

 With some CD-R or CD-RW media, data may not be properly written depending on their

manufacturing quality. In this case, data may not be reproduced correctly. High quality CD-R

or CD-RW disc is recommended.

 Up to 16 characters are displayed for the name of an Album or a Track. ID3TAG version 1.x is

required.

 Note that the unit may not play Tracks in the order that you wrote them to the disc.

20

Anti-Theft System

Remove the panel

1. Press POWER button to switch off the power of the unit.

2. Press OPEN button to flip down the panel.

3. Push the panel to the left and then pull it towards you.

4. Put it to the special box and take it with you.

Remove the unit

1. Remove the panel and the trim plate.

2. Insert both T-Keys into hole on the front of the set until they lock.

3. Pull out the unit.

Страница загружается ...

SoundMax SM-CDM1050/G Руководство пользователя

SoundMax SM-CDM1050/G Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов