Hyundai H-CMD7079 (ЧЁРНЫЙ) Руководство пользователя

H- CMD7079

DVD RECEIVER WITH BLUETOOTH DVD- C BLUETOOTH

Instruction manual 

2

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before

connecting, operating and/or adjusting the product and keep the manual for reference in the future.

Table of contents

Table of contents ............................................................................................................................................2

Important safeguards ......................................................................................................................................3

Installation/Connections.................................................................................................................................4

Panel controls.................................................................................................................................................9

Remote control (RC) ....................................................................................................................................11

Glossary.......................................................................................................................................................13

General operations........................................................................................................................................14

Radio operations...........................................................................................................................................17

DVD operations ...........................................................................................................................................20

Mixed-disc operations ..................................................................................................................................24

VCD/CD/MP3 operations.............................................................................................................................26

AUX in, RCA out, SUB out, Video out and USB/SD operations...................................................................28

Menu operations...........................................................................................................................................30

Bluetooth operations.....................................................................................................................................38

Handling discs..............................................................................................................................................41

Cleaning.......................................................................................................................................................41

Troubleshooting guide..................................................................................................................................42

Specification ................................................................................................................................................43

3

Important safeguards

 Using the device at temperature below -10º may cause the breakage of the device. Before using please heat up

the passenger compartment to the recommended temperature!

 Read carefully through this manual to familiarize yourself with this high-quality system.

 Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.

 When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher

amperage rating may cause serious damage to the unit.

 Do not attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.

 Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create

safety hazards such as electrical shock or laser beam exposure.

 If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes

normal before operating the unit.

 Do not open covers and do not repair yourself. Consult the dealer or an experienced technician for help.

 Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or

during a thunderstorm.

 Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an

unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified

technician check the system.

 The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please

confirm it before installation.

 Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload

or burn out the power amplifier.

 Do not install the detachable panel before connecting the wire.

4

Installation/Connections

First complete the electrical connections, and then check them for correctness. If you are not confident working

with electrical wiring, removing and reinstalling interior panels, carpeting, dashboards or other components of your

vehicle, please call your dealer in order to have the unit professionally installed.

Before the installation

1. Remove the old unit from the dashboard.

 Remove the outer trim frame.

 Insert the keys supplied with the old unit into both sides of the unit as shown in figure below until they click.

Pull to remove the old unit from the dashboard. Do not disconnect wires at this time!

2. Mark polarity of the speaker wires.

Marking the polarity of the speaker wires will make it easier to connect the existing speakers to your unit. Consult

wiring diagram of existing head unit before disconnecting any wires. If you are not positive of the polarity of the

existing wires from the speakers to the head unit, install new wires.

 While the old unit is playing, disconnect the wires from one speaker.

 Take a length of masking tape and fold it around the wire so it forms a flag.

 On the masking tape mark the polarity of the speaker wires (+ & -), as well as left or right, and front or rear.

 Double check that you marked the first speaker correctly by checking that the speaker wires are the same at the

head unit.

 Repeat this procedure for all of the speakers.

 Mark the power, ground, and any other wires also.

5

Installation method A

WARNING: Disconnect negative battery terminal from battery before starting installation. Consult the vehicle’s

owner’s manual for proper instructions.

Remove two transport screws from the top of the unit before installation.

1. After removing the old unit and mounting sleeve, insert supplied mounting sleeve in the opening.

2. Bend the tabs on the mounting sleeve to keep the mounting sleeve firmly in place.

3. Attach wires from the unit to existing wires. See wiring connections diagram. Insert the unit into dashboard.

Then apply the trim frame to outside of the unit.

4. Support the unit using supplied rear mounting bolt and steel bar.

6

Installation method B

Note: Outer trim frame, hook, and mounting sleeve are not used

for this installation.

This is only intended as a general guide; contact the vehicle's

manufacturer for specific instructions.

This method of installation uses the screw holes at the sides of the

unit and the holes of the existing vehicle mounting bracket.

1. Remove the hooks on both sides.

2. Align the screw holes of the mounting bracket supplied with

the car and the screw holes of the main unit. Tighten the 2

screws on each side of the unit. Then fasten the brackets to the

car.

3. Attach wires of the unit to existing speaker wires. See wiring

diagram.

7

Electrical connections

Speaker Wiring Notes

Follow the above wiring diagram to install the head unit with new or existing speakers.

 This unit is designed for use with four (4) speakers with the impedance between 4 Ohms to 8 Ohms.

 An impedance load of less than 4 Ohms could damage the unit.

8

 Never bridge or combine the speaker wire outputs. When not using four speakers, use electrical tape to tape the

ends of the unused speaker outputs to prevent a short circuit.

 Never ground the negative speaker terminals to chassis ground.

Using the ISO Connector

1. If your car is equipped with the ISO connector, then connect the ISO connectors as

illustrated.

2. For connections without the ISO connectors, check the wiring in the vehicle carefully

before connecting, incorrect connection may cause serious damage to this unit.

Cut the connector; connect the colored leads of the power cord to the car battery as shown

in the color code table below for speaker and power cable connections.

Function

Location

Connector A Connector B

1 Rear Right (+)---Blue

2 Rear Right (-)---Blue/White Stripe

3 Front Right (+)---Grey

4 Battery 12V (+)/yellow Front Right (-)---Grey/White Stripe

5 Auto Antenna/orange Front Left (+)---Green

6 Panel light/white Front Left ((-)---Green/White Stripe

7 ACC+/red Rear Left (+)---Brown

8 Ground/black Rear Left (-)---Brown/White Stripe

9

Panel controls

Front panel

1. REL button

2. POWER button

3. PREVIOUS button

4. NEXT button

5. BD/NP/SUB button

6. APS button

7. MODE button

8. PHONE button

9. AUX IN

10. Numeric pad

11. MIC in

12. USB slot

13. Bluetooth operation indicator

10

14. SD slot

15. EJECT button

16. LCD display

17. Remote control sensor

18. DISC slot

19. ANSWER button

20. VOL/SEL knob

21. END CALL button

Back of the front panel

1. Disc loading slot

2. Connector

3. RESET button

4. LED indicator

11

Remote control (RC)

1. POWER button

2. MODE button

3. BND/SYS button

4. Cursor (LEFT/RIGHT/UP/DOWN)/

ENTER button

5. STOP button

6. AMS/RPT button

7. ST/PROG button

8. LOC/RDM button

9. PREVIOUS/SEEK - button

10. MENU/PBC button

11. OSD button

12. MUTE button

13. ANSWER button

14. GOTO button

15. PLAY/PAUSE button

16. SUB-T button

17. TITLE button

18. SETUP button

19. SLOW button

20. ANGLE button

21. ZOOM button

22. NEXT/SEEK + button

12

23. VOL+/VOL-/SEL buttons

24. AUDIO button

25. Numeric pad

26. CLOCK DISPLAY/END CALL button

27. PHONE button

Battery information of RC

1. Press the catch and at the same time pull out the battery tray.

2. Insert the 1 x lithium battery, type CR 2025 3V battery with the stamped (+) mark facing

upward. Insert the battery tray into the RC.

Warning: Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a

doctor immediately.

Do not recharge, short, disassemble or heat the battery or dispose it in a fire.

Do not expose or bring into contact the battery with other metallic materials. Doing this may cause the battery to give

off heat, crack or start a fire.

When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may give off heat,

crack or start a fire.

13

Glossary

PBC (PlayBack Control)

PlayBack Control is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, it can

playback interactive software with the menu displayed on TV. And if the disc contains still images, it can playback

high definition of still image.

Title

The title is the important part of DVD disc. The memory volume of the disc is rather big, that makes possible to

record several films on one disc. For example, if a disc contains three films, they may be divided into Title 1, Title 2

and Title 3. You can easy use the functions of looking-for.

Chapter

A title can be divided into several blocks, so that every block can be operated as a unit, the unit is called chapter. The

chapter contains a unit at least.

Track

It is the biggest component of VCD. Generally, every song of karaoke disc is a track.

14

General operations

Reset the unit

Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press RESET button to

restore the unit to the original factory settings.

Power button

Press POWER button to turn on the unit. Press POWER to switch the power off. When you switch off the system or

car ignition, the settings, tuner presets and the volume level will be retained in the unit’s memory.

Mode selection

Press the MODE button to cycle the play mode between RADIO, DISC PLAY, USB, SD Card and AUX modes.

Volume adjust

Rotate the VOL/SEL knob on the panel or press the VOL+/VOL- buttons on the RC to adjust the volume level.

Setting the sound and other characteristics

Press repeatedly the VOL/SEL knob on the panel to select the audio setting: VOL => BAS => TRE => BAL =>

FAD => LOUD OFF => LOC OFF => STON => EQ OFF.

 VOL: rotate the VOL/SEL knob on the panel or press the VOL+/VOL- buttons on the RC to adjust the volume

level.

 BASS, TREBLE, BALANCE, FADER: rotate the VOL/SEL knob to regulate each setting.

 LOUD: rotate the VOL/SEL knob to turn it on or off.

 LOC: rotate the VOL/SEL knob to turn the local reception on or off.

 STEREO: rotate the VOL/SEL knob to turn the stereo reception on or off.

 EQ: select the following equalizer modes by rotating the VOL/SEL knob: OFF => CLASSIC => POP =>

15

ROCK => FLAT.

Keep pressing SEL/VOL knob for 2 seconds to select the RDS function:

TA SEEK/ALARM => RETUNE L/S => MASK DPI/ALL.

 TA (Traffic Announcement) mode

To determine what action will the radio take if the newly tuned station does not receive TP (Transport Program)

information for 5 seconds. Rotate the VOL/SEL knob to select the desired mode: TA ALARM and TA SEEK.

- TA SEEK

When newly tuned station does not receive TP information for 5 seconds, the radio retunes to next station

which has not the same station (PI – Program Information) as the last station, but has the TP information.

When TP information gets lost at the current station for retune time which is set by RETUNE SHORT (30

seconds) or RETUNE LONG (90 seconds), the radio starts to retune to next same PI station. When same PI

station does not catch in 1 cyclic search, the radio retunes to next station with TP information.

- TA ALARM

During searching the radio does not retune but the double beep sound (alarm) is output.

 RETUNE mode

To determine the initial time of automatic TA (Traffic Announcement) search.

There are 2 modes: RETUNE L and RETUNE L.

- RETUNE L: 90 seconds.

- RETUNE S: 30 seconds.

Note: Retune mode is active for TA SEEK mode only.

 MASK mode

During AF search, PI stations and non-RDS (Radio Data Station) stations with strong signal will be masked, in

the latter case, the non-RDS stations may cause interference, resulting the real AF to be masked due to the

misjudgment of the radio under interference. Rotate the VOL/SEL knob to select the desired mode: MASK DPI

and MASK ALL.

- MASK DPI

16

To mask only the AF with different PI.

- MASK ALL

To mask both PI and strong signal non-RDS station.

Mute

Press the MUTE button to activate the Mute function. Press it again or use the VOL/SEL knob on the panel or press

the VOL+/VOL- buttons on the RC to cancel.

Adjusting clock

1. Press and hold CLOCK DISPLAY button for more than 3 seconds to select the hour setting. Hour digits will

blink.

2. Rotate VOL/SEL knob to set the hours.

3. Press VOL/SEL knob to select the minute setting. Minute digits will blink.

4. Rotate VOL/SEL knob to set the minutes.

5. Press CLOCK DISPLAY button, or leave the unit idle. Time setting is now confirmed.

17

Radio operations

Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not

available in you area, the following service is not available, either.

Choose Radio Band

Press BND/SYS button on the RC or BD/NP/SUB button on the panel to select a band. The unit has with five

bands: FM1, FM2, FM3, MW1 and MW2. Each of the five bands can store up to six preset stations, for a total of

30 preset memory stations.

Radio Tune/Seek Function

Press NEXT/SEEK+ or PREVIOUS/SEEK- buttons on the RC or PREVIOUS/NEXT buttons on the panel to

manually adjust the radio frequency. Press and hold these buttons, the radio will automatically seek for the next up

or down strong and clear frequency station. Repeat this action to seek for other desired stations.

Mono/Stereo Reception Control

In FM radio mode, press the ST/PROG button on the RC to select stereo or mono reception. “ST ON” will show

on the display indicating that stereo reception is received.

Improvement of reception of distant stations can be done by selecting “ST-PROG” operation which may cut down

some reception noise.

Local/Distance Reception

Press the LOC/RDM button on the RC to select local or distant stations reception.

“LOC ON” shows on the display, meaning that local reception is turned on; “LOC OFF” shows on the display,

meaning that distant reception is turned on.

Local and distance reception setting can facilitate the radio reception, depending on the location in which the radio

is being used.

18

Save Your Preset Stations

There are six numbered preset buttons, which can store and recall stations for each band. If while listening to a

radio station you would like to save the station as a pre-set, press and hold one of the numeric buttons 1-6 until

you hear a beep. The button you pressed is now the pre-set button for that station.

Automatic Store/Preset Scan

Automatic Scan and Store

While listening to the FM radio, press and hold APS button for 3 seconds. The unit will automatically scan and

save stations for all the 3 FM bands, whichever band (FM1, 2 or 3) you are listening to. While listening to the AM

radio, press APS button for 3 seconds. The receiver will automatically scan and save stations for the 2 AM bands,

whichever band (MW1 or 2) you are listening to.

Scan Saved Stations

Press APS button on the panel or AMS button on the RC once to perform the scanning functions. In FM mode,

press APS button on the panel or AMS button on the RC and the stations in that FM band will be scanned; press

the buttons in AM mode and scan the band stations of that AM band.

RDS-EON CONTROL

This unit is equipped with the latest technology of EON control, so that when you are listening to Radio or CD, if

there is any travel announcement from a nearby local station, the radio will already know the frequency of that

radio station. Then it will receive the station, turn up the volume, or interrupt the playback of the music for the

duration of the announcement. At the end of the announcement the radio will return to its previous state ready for

the next announcement.

AF-ALTERNATIVE FREQUENCY

Press 7/AF numeric button on the panel so that the unit will choose the strongest FM signal for the selected station,

19

so that you do not have to re-tune the stations when driving between different transmitter coverage areas. When

AF is on, it means RDS information is received; when AF is flashing, it means RDS information is not yet

received.

TA - TRAFFIC ANOUNCEMENT

Press 8/TA numeric button on the panel so that the unit will be activated for reception of traffic announcement

from local radio stations. To choose the TA mode, press and hold SEL button for 2 seconds, the display will show

TA SEEK. Rotate VOL/SEL knob to choose between the TA SEEK and TA ALARM, after choosing, please leave

the unit idle for the mode to activate. In TA SEEK mode the unit will seek for traffic announcement program when

8/TA numeric button is pressed; in TA ALARM mode, no TA/TP is displayed and the alarm is set off.

PTY - PROGRAM TYPE

This radio will allow you to select the type of program required, and will search for a station broadcasting that

type of program. Press the 9/PTY numeric button on the panel once to show the music type. Then press 1-6

buttons to choose different music types available. Press 9/PTY numeric button twice to show the speech type

program. Then press 1-6 buttons to choose different speech type programs. Each number button will show 3

different speech programs for you to choose.

20

DVD operations

Insert/Eject disc

Insert a disc into disc slot with label side up. The disc will be automatically loaded into the unit, even when it is off

or in radio mode. The word “LOAD” will show on the display and the disc will play automatically. Press EJECT

button to eject the disc from the slot. If the disc is not removed from the slot within 5 seconds, it will automatically be

loaded into the slot again. When the disc is ejected and removed, the unit will automatically switch to radio mode.

OSD (Display information)

Press and hold button 1/OSD button on the front panel, or press OSD button on the RC, so that the OSD will be

displayed on the monitor. Details such as title, track, playtime, etc, will be shown. Press again to turn the OSD off.

Playing the DVD

After the disc is loaded, the movie of the DVD will be played automatically. The menu will be prompted so that you

can choose the setting. Press the PBC/MENU button on the RC during playback so that the menu will be shown. The

disc will go back to the opening screen if PBC/MENU button is pressed.

Title Playing

Press the TITLE button on the RC so that the title menu of the DVD will be displayed.

Selecting Tracks

On the panel press NEXT button to advance to the next track. Track numbers will be shown on the display. Press and

hold NEXT button to fast forward. Press PREVIUOS button to go to a previous track. Track numbers will be shown

on the display. Press and hold PREVIOUS button to fast reverse. Disc will play normally when the buttons are

released. On the RC, use PREVIOUS/SEEK- or NEX/SEEK+ buttons.

Страница загружается ...

Hyundai H-CMD7079 (ЧЁРНЫЙ) Руководство пользователя

Hyundai H-CMD7079 (ЧЁРНЫЙ) Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов