Hyundai H-CMD7086 Руководство пользователя

H-CMD7086

DVD/CD/MP3 RECEIVER WITH BLUETOOTH

DVD/CD/MP3- C  BLUETOOTH

Instruction manual 

2

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully

before connecting, operating and/or adjusting the product and keep the manual for reference in the future.

Table of contents

Table of contents ...............................................................................................................................................2

Important safeguards .........................................................................................................................................3

Accessories........................................................................................................................................................4

Installation/connection.......................................................................................................................................5

Panel controls..................................................................................................................................................11

General operations...........................................................................................................................................15

Digital tuner operations ...................................................................................................................................18

Disc glossary...................................................................................................................................................21

DVD/SD/MMC/USB operations......................................................................................................................22

MP3 overview.................................................................................................................................................29

DVD setup.......................................................................................................................................................31

Bluetooth operation (option)............................................................................................................................34

Handling discs.................................................................................................................................................37

Cleaning..........................................................................................................................................................37

Troubleshooting guide.....................................................................................................................................38

Specification....................................................................................................................................................40

3

Important safeguards

 Read carefully through this manual to familiarize yourself with this high-quality sound system.

 The beginning of operation is the moment of the unit installation. Before use the device in winter it is

recommended to heat up the passenger compartment during 20 seconds or to the operation temperature.

 Use the unit with the temperature that goes beyond the operation temperature greatly decreases the

operation resource of the screen and other components of device and can result an outage.

 Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.

 When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher

amperage rating may cause serious damage to the unit.

 Do not attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.

 Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or

create safety hazards such as electrical shock or laser beam exposure.

 Do not use the unit in places where it can be exposed to water, moisture and dust.

 Do not open covers and do not repair yourself. Consult the dealer or an experienced technician for help.

 Make sure you disconnect the power supply and aerial if you will not be using the system for a long period

or during a thunderstorm.

 Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an

unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a

qualified technician check the system.

 The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please

confirm it before installation.

 Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may

overload or burn out the power amplifier.

4

Accessories

Receiver 1 pc

Remote controller 1 pc

Panel protective case 1 pc

AV cable 1 pc

USB cable 1 pc

ISO cable 1 pc

Mounting parts:

 Release keys 2 pc

 Screw 20 1 pc

 Bolt 6 4 pc

 Washer 2 pc

 Nut 1 pc

 Mounting strap 1 pc

 Rubber 1 pc

Consumer information 1 pc

Warranty card 1 pc

Instruction manual 1 pc

5

Installation/connection

 Choose the mounting location where the unit will not interfere with the normal driving function of the

driver.

 Before finally installing the unit, connect the wiring and make sure that the unit works properly.

 Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the

vehicle.

 Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden

stop, like an emergency stop.

 If installation angle exceeds 30° from horizontal, the unit may not perform properly.

 Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or

from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.

Din Front/Rear-Mount

This unit can be properly installed either from 'Front' (conventional DIN Front-mount) or 'Rear' (DIN Rear-

mount installation, utilizing threaded screw Holes at the sides of the unit chassis). For details, refer to the

following illustrated installation methods.

DIN FRONT-MOUNT (Method A)

1. Car dashboard

2. Sleeve

3. Screw

4. Nut

5. Spring washer

6. Screw

7. Metal strap

8. Flat washer

6

1. Install the sleeve into the dashboard; ensure it is installed with the correct

side and there are no obstacles (wires, dashboard elements, etc) for the

unit installation.

2. After installing the sleeve into the dashboard, bend tabs fitting to the size

of the dashboard to fix the sleeve in place.

3. Use the metal strap to fix the rear side of the unit. Determine a place for

fixing and install the strap as shown in the picture. You can bend the strap

to the needed angle with your hands.

4. Make the necessary wire connections. Ensure the connections are correct.

5. Install the unit into the sleeve until the side locks are fixed.

Dismantling the unit

 – Trim frame

 – Frame uninstall direction

 – Release key insertion

1. Switch off the unit and detach the front panel.

2. Insert your fingers into the groove in the front side of the trim frame

(apply some effort to detach the frame). Pull the frame to detach it.

3. Insert the supplied release keys into the both sides of the unit body

to click, as shown in the picture. To extract the unit from the

dashboard, pull the release keys or the unit body to pull it out.

Before detaching the unit, ensure it is not fixed with the metal strap.

7

Trim frame installation

To install the trim frame, press it to the unit body and push it to fix it in place. This should be done before

installing the front panel; otherwise you are not able to install the trim frame. When the trim frame being

installed, the side with the groove should face down and fixed first.

2. DIN REAR-MOUNT (Method B)

For this method, use the screw holes in the lateral sides of the unit. Fix the unit with the help of the factory

radio mounting brackets.

1. Select a position in which the screw holes of the brackets (3) are aligned

with the screw holes in the unit body, and screw in two screws (2) in each

side.

2. Screw.

3. Factory radio mounting brackets.

4. Vehicle dashboard.

5. Lock (remove this part).

Note: The outer trim frame and mounting sleeve are not used for method of installation.

Detaching the front panel

1. Press OPEN button on the front panel. The panel will go down (pic. 1).

2. Push the panel to the right and then pull it towards you (pic. 2).

Pic. 1 Pic. 2

8

Attaching the control panel

1. Insert the right side of the control panel into the main

unit (pic. 3).

2. Press the control panel on to the left side of middle of it

until a “click” sound is heard (pic. 4).

Caution:

 Do not insert the control panel from the left side. It can damage the control panel.

 The control panel can easily be damaged by shocks. After removing it, place it in a protective case and be

careful not to drop it or subject it to strong shocks.

 The rear connector that connects the main unit and the control panel is an extremely important part. Be

careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.

Note: If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in

isopropyl alcohol to clean the socket on the back of the control panel.

Pic. 3

Pic. 4

9

Electrical connection

Caution: For some car models you may need to modify wiring of the supplied power cord. Contact your

authorized car dealer before installing this unit.

Notes: 2 cable is connected to a Hands-Free device (not included).

10

The parking wire is connected with brake signal; for safety, the programs can be seen on the monitor after

braking the car.

11

Panel controls

Front panel

1. PWR/MUTE button

2. OPEN button

3. SD/MMC card slot

4. DISC slot

5. EJECT button

6. USB jack

7. AV IN

8. MODE/REJECT CALL button

9. ACCEPT CALL button

10. DIS/DUAL button

11. VOL KNOB/SEL button

12. TA/DSP button

13. PTY/SCAN button

14. AF/MONO button

15. BAND/LOUD button

16. NEXT button

17. PREVIOUS button

18. AS/PS button

19. 1/PLAY/PAUSE button

20. 2/REPEAT button

21. 3/INTRO button

22. 4/RANDOM button

12

23. 5/ DIR- button Inner panel

24. 6/DIR+ button

25. IR remote control sensor

26. Microphone

27. Panel status indicator

28. RESET button

13

Remote control

1. DISP/DUAL button

2. STANDBY button

3. OSD button

4. ST/MO button

5. SETUP button

6. ENTER button

7. PREVIOUS/NEXT button

8. ANGLE button

9. VOL- button

10. SEL button

11. BAND/RDM button

12. AUDIO/GOTO button

13. Number buttons

14. ACCEPT CALL/T-MENU button

15. TITLE button

16. DSP button

17. MODE button

18. MUTE button

19. MENU button

20. Cursor buttons (LEFT, RIGHT, UP, DOWN)

21. PLAY/PAUSE button

22. INT button 25. A-B/ZOOM button 28. P.SCN/RPT button

23. VOL+ button 26. SUB-T button 29. REJECT CALL button

24. STOP/PBC button 27. PROG/PTY button

14

Changing the battery

1. Pull out the battery tray. Insert the 1 x lithium battery, type CR 2025 3V battery with

the stamped (+) mark facing upward.

2. Insert the battery tray into the remote control.

Warning:

 Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a

doctor immediately.

 Do not recharge, short, disassemble or heat the battery or dispose it in a fire.

 Do not expose or bring into contact the battery with other metallic materials. Doing this may cause the

battery to give off heat, crack or start a fire.

 When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may give

off heat, crack or start a fire.

15

General operations

Reset the unit

Operating the unit for the first time or after replacing the car battery, you must reset the unit.

Press OPEN button on the panel to open the panel and press RESET button to restore the unit to the original

factory settings.

Power button

Press any button on the panel (except OPEN button) or STANDBY button on the RC to turn on the unit. Press

and hold PWR/MUTE button on the panel or STANDBY button on the RC to switch the unit off.

Note: After the unit is off, the volume level and radio current settings will be memorized, and when you turn

the unit on it will resume the stored status you set.

Volume control

Rotate VOL knob on the panel or press VOL +/- on the RC to adjust the volume level.

Setting the sound characteristics

Press shortly and repeatedly the SEL button to select the audio setting: VOLUME (VOL) => BASS =>

TREBLE (TRB) => BALANCE (BAL) => FADER (FAD). Rotate VOL knob or press VOL+/- buttons on the

RC to regulate each setting.

Note:

 If turning off the power all the settings of each mode will be saved.

 If turning off the ACC power or reset the unit all the settings will become as they were set on the plant.

 If you don’t adjust VOL knob within 6 seconds after selecting the desired setting, the unit will

automatically return to the current mode being displayed.

16

Setting other characteristics

During TUNER mode press SEL button and hold for 2 seconds, shortly and repeatedly press SEL button to

select the setting: TA SEEK => PI MUTE => RETUNE L => MASK DPI =>TA VOL => EON TA => DISP

REV => BEEP. To adjust the selected setting, rotate VOL knob or press VOL+/- buttons on the RC.

TA SEEK/TA ALARM

In TA SEEK mode, the unit will seek for traffic announcement program when TA is pressed; in TA ALARM

mode, no TA/TP is displayed and the alarm is set off. After choosing, please leave the unit idle to activate.

PI SOUND/MUTE

PI SOUND refers to the reception noise when the AF function tries to scan alternative frequency.

RETUNE S/L - SHORT/LONG

RETUNE refers to the time period the unit allows for radio scan when reception is interrupted. “S” represents a

time period of 30 seconds and “L” represents a time period of 90 seconds.

MASK DPI/MASK ALL

During MASK DPI mode, the unit will mask only the AF which has different PI, this is the default mode;

during MASK ALL mode, the unit will mask the AF which has different PI and no RDS signal with high field

strength.

TA VOLUME

: Rotate the knob or press VOL+/- button to choose the volume level of TA announcements.

EON TA: Rotate the knob to select EON TA LO/EON TA DX mode. If you want to receive information from

local stations only, select EON  LO mode. Otherwise, select EON TA DX mode.

BEEP

Turn BEEP on if you want the pressing of buttons to be sounded. Press SEL Button until the display shows

BEEP, then use the VOL+/- Button to turn BEEP sound ALL or OFF or 2ND (you hear BEEP sound when you

press and hold a button).

DISP REV

: Rotate the knob to select LED display color between black and white.

17

Turning the sound off

Press MUTE button on the RC or PWR/MUTE button on the unit to turn the sound off. Press it again or press

VOL+/- buttons on the RC or rotate VOL knob on the panel to turn the sound on.

Mode setting

Press MODE/REJECT CALL button on the panel or MODE button on the RC repeatedly to select: TUNER =>

DVD (if inserted) => USB (if USB device is inserted) => SD (if the flash card is inserted) => AUX.

Equalizer setting

Press and hold TA/DSP button on the unit or press DSP button on the RC to select the equalizer mode: FLAT

=> CLASSICS => POP => ROCK => DSP OFF.

AV jack

Intended to receive audio and video signals by connecting to outside input device.

Display

Press DIS/DUAL button on the unit or DISP/DUAL button on the RC to see current tuning information and

time. Sequence of the menu: Clock/Time => Radio Frequency => PTY=> Exit.

18

Digital tuner operations

Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not

available in you area, the following service is not available, either.

RDS overview

PI: Program Identification Code – for identifying code.

PS: Program Service Name Broadcast – station name data expressed in alphanumerically character.

TP: Traffic Program Identification – for traffic information broadcasting station.

TA: Traffic Announcement Identification – showing traffic information is being transmitted or not.

AF: Alternative frequencies – frequency list of broadcasting station transmitting the same program.

Band selection

In Tuner mode press BAND once or more to select: FM1, FM2, FM3, MW1 (AM1), MW2 (AM2).

Manual/automatic tuning

 Manual tuning: select a band. Press and hold PREVIOUS/NEXT buttons, MANUAL appears on the

display, then press these buttons repeatedly to search a station step by step upward or downward.

 Automatic tuning: select a band. Press PREVIOUS/NEXT buttons, the automatic backward/forward

search will start. It will play when finds the station.

Programming tuner stations

You can store up to a total of 30 radio stations in the memory (18 FM, 12 AM (MW)).

 To store a station:

- Select a band;

- Select a station by pressing PREVIOUS/NEXT buttons.

19

- Hold a preset button (1-6), which you want store the station for at least 2 seconds.

 To recall a station:

- Select a band (if needed)

- Press a preset button (1-6) briefly to recall the stored station.

AF/MONO button

Press AF/MONO button to enable AF mode. Press and hold AF/MONO on the unit or press ST/MO on the RC

to choose MONO or STEREO.

Auto memory store

Select a band. Press AS/PS button on the panel or P.SCN/RPT button on the RC and hold for 2 seconds to enter

auto store mode. The radio will automatically store 6 stations to the 6 preset memories of the current band. To

stop auto store, press this button again.

Preset scan

Select a band. Press AS/PS button on the panel or P.SCN/RPT button on the RC to scan all preset stations in the

memories of the current band. To stop preset scan, press the button again.

TA (Traffic Announcement) function

1. Press TA/DSP button shortly to turn on or turn off the TA function. When the TA function, TA icon will be

displayed.

2. When TA or TP RDS signal is available from the current station, TP icon is turned on. When TA/TP is

enabled (on), but no traffic announcement is transmitted, TP icon is off and TA icon keeps blinking.

AF (Alternative Frequencies) function

Press AF/MONO button on the panel shortly to turn on or turn off the AF function. If the AF function is on the

display will show “AF”. When AF switching mode is selected, but RDS information is not received yet the

“AF” will be flashing.

20

The RDS program will be automatically searched and received. After turning on, if the RDS signal is weak or

even no signal, the unit will search another frequency with this RDS program.

Default setting is ON.

PTY (Program Type) function

1. Press PTY/SCN button on the panel or press PROG/PTY button on the RC to select the program type

group: MUSIC GROUP => twice to select SPEECH GROUP => PTY OFF.

2. When the program type is selected press digit buttons (1~6) repeatedly to select the program type

according to the table:

Preset number PTY music group

Preset number PTY speech group

1 POP M, ROCK M 1 NEWS, AFFAIRS, INFO

2 EAST M, LIGHT M 2 SPORT, EDUCATE, DRAMA

3 CLASSICS, OTHER M 3 CULTURE, SCIENCE, VARIED

4 JAZZ M, COUNTRY M 4 WEATHER, FINANCE, CHILDREN

5 NATION M, OLDIES M 5 SOCIAL, RELIGION, PHONE IN

6 FOLK M 6 TRAVEL, LEISURE, DOCUMENT

3. Searching will start. If PTY code is different or not available, the PTY icon will start blinking.

4. Press PTY/SCN button on the panel or PROG/PTY button on the RC to switch the PTY function off.

Страница загружается...

Hyundai H-CMD7086 Руководство пользователя

Похожие модели бренда

Модели других брендов