Roborock S6P02-02 Руководство пользователя

Руководство пользователя робота-пылесоса

Roborock S6 Pure

Внимательное прочитайте это руководство пользователя перед использованием устройства

и сохраните его в надежном месте.

Roborock S6 Pure Robot Vacuum Cleaner User Manual

Read this user manual carefully before using this product and store it properly for future reference.

Roborock S6 Pure Robot Vacuum Cleaner User Manual

Read this user manual carefully before using this product and store it properly for future reference.

Руководство пользователя робота-пылесоса

Roborock S6 Pure

Внимательное прочитайте это руководство пользователя перед использованием устройства

и сохраните его в надежном месте.

01

33

Safety Information 01

•

troubleshooting 05

•

Product Introduction 06

•

Installation 10

•

Instructions for Use 14

•

Routine Maintenance 18

•

Basic parameters 23

•

Troubleshooting 24

•

FAQs 26

•

EU Declaration of Conformity 28

•

WEEE Information 31

•

Warranty Information

32

•

• This product is designed for indoor floor cleaning only, do not use it outdoors

(such as on an open-ended terrace), on any surface other than the ground (such

as a sofa), or in any commercial or industrial environment.

• Do not use this product on elevated surfaces without barriers such as the floor of

a loft, an open-ended terrace, or on top of furniture.

• Do not use the product when the ambient temperature is higher than 104°F

(40°C), lower than 39°F (4°C), or if there are liquids or tacky substances on the floor.

• Before using the product, move wires off the ground or place them to the side to

prevent them being pulled on by the cleaner.

• To prevent blocking the product and to avoid damage to valuables, remove

light-weight items (such as plastic bags) and fragile objects (such as vases) from

the floor before cleaning.

• Children should be supervised to ensure that they do not play with the appliance.

• This product is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and

knowledge,unless they have been given supervision or instruction concerning use

of the product by a person responsible for their safety (CB).

• This product can be used by children aged from 8 years and above and persons

with reduced physical,sensory or mental capabilities or lack of experience and

Safety Information

Restrictions

01

Safety Information

knowledge if they have been given supervision or instruction concerning use of

the product in a safe way and understand the hazards involved. Children shall not

play with the product. Cleaning and user maintenance shall not be made by

children without supervision (EU).

• Keep the main brush cleaning tools out of reach of children.

• Do not place any object (including children and pets) on the product, whether it

is in operation or not.

• Keep hair, loose clothing, fingers, and all parts of the body away from openings

and moving parts.

• Do not use the product on burning objects (such as cigarette butts).

• Do not use the product on high pile carpets (product effectiveness may also be

reduced on dark carpets).

• Do not use the product to clean hard or sharp objects (such as decoration

wastes, glass and nails).

• Do not carry the product using the laser scanner cap, main unit cover, or collision buffer.

• The product must be switched off and the plug must be removed from

socket-outlet before cleaning or maintaining the product.

• Do not use wet cloth or liquids for cleaning the product.

• Do not use the mopping module on carpets.

02

Safety Information

• Do not charge non-rechargeable batteries.

• For the purposes of recharging the battery, only use the detachable supply unit

roborock CDZ11RR or CDZ12RR provided with this product.

• Do not dismantle, repair or modify the battery or charging dock.

• Keep the charging dock away from heat (such as heating vents).

• The battery must be removed from the appliance before it is scrapped.

• The product must be disconnected from the supply mains when removing the

battery.

• The battery must be disposed of safely. Do not discard waste batteries. Leave

them with a professional recycling organization.

• Do not wipe or clean the charger prongs with wet cloth or wet hands.

• If the power cord is damaged, stop using it immediately. It must be replaced by

the manufacturer, its service agent, or similarly qualified persons to avoid a

hazard.

Battery and Charging

WARNING

• Use the product according to the manual. Any loss or damage caused from

improper use will be borne by the user.

• This product contains batteries that are only replaceable by skilled persons.

03

04

Safety Information

• Make sure the product is powered off before shipment.

• Use of the original packaging is advised.

• If to be left unused for a long period of time, fully charge the product and switch it

off before storing it in a cool, dry place.

• Charge it at least every three months to avoid over discharging the battery.

• To satisfy RF exposure requirements, a separation distance of 20 cm or more

should be maintained between this device and persons during device operation.

• To ensure compliance, operations at closer than this distance is not

recommended. The antenna used for this transmitter must not be co-located in

conjunction with any other antenna or transmitter.

Roborock robot vacuum cleaner troubleshooting

Name

Robot

Charging dock The robot does not receive power

The main brush, side brush, fan, or main wheels do not work

The product cannot be powered on

Problem listed in the User Manual

Power cable The charging dock cannot be supplied with power

Troubleshooting

Roborock robot vacuum cleaner troubleshooting

05

Product Introduction

Robot

On/Off

• Press to start cleaning

• Press and hold to power on or off

Power indicator

• White: Battery level ≥ 20%

• Red: Battery level < 20%

• Flashing slowly: Charging or starting up

• Flashing red: Error

Dock/Spot Clean

• Press to return to the dock

• Press and hold to spot clean

Note:

Press any button to pause cleaning, returning

to dock, or spot cleaning.

Cover latch

06

Product Introduction

Parts list

Charging dock Power cableMoisture-proof mat

Adjustable water tank Mop cloth

07

Product Introduction

Dustbin

Robot

System reset

Air vent

Air filter

Dustbin latch

Dustbin cover

Main brush cleaning tool

Speaker

WiFi indicator light

• Off: WiFi disabled

• Slow flashing: Waiting

for connection

• Fast flashing: Connecting

• Steady: WiFi connected

08

Product Introduction

Robot and sensors

Bumper

Recharge sensor

Laser

distance

sensor

Wall sensor

Side brush

Omnidirectional

wheel

Charging contact

Main brush

cover latch

Main wheels

Cliff sensor

09

height

sensor

Installation

Using the robot

1. Place the charging dock against the wall on a flat surface

and plug it into the mains power.

Note:

• The charging dock should have more than 0.5m (1.6ft) of clearance on each

side, and more than 1.5m (4.9ft) in the front.

• If the power cable is vertical to the ground, it may be caught by the robot,

causing the charging dock to be disconnected.

• The charging dock indicator is on when the charging dock is electrified, and

off when the robot is charging.

More than 0.5m (1.6ft)

More than 1.5m (4.9ft)

Product Introduction

Mopping module

Charging dock

Charging

points

Locator

beacon

Charging

dock power

indicator

Power socket

Charging points

Water tank

Water tank latch

Flow control

Water tank latch

Mop cloth attachment slot

Water tank cover

Filter

Mop cloth

Attachment

area

10

Installation

Using the robot

2. Secure the charging dock with the adhesive tape

Wipe the floor of the area where the charging dock will be

placed with a dry cloth, then stick the enclosed double-sided

tape to the floor. Place the dock onto the double-sided tape

to secure it in place.

4. Power on and charge.

Press and hold the button to turn on the robot. When

the power indicator lights up, place the robot onto the

charging dock to begin charging. The robot uses a

high-performance lithium-ion rechargeable battery. To

maintain peak battery performance, always keep the robot

charged.

3. Secure the moisture-proof mat.

After securing the charging dock, wipe the area where the

moisture-proof mat will be placed with a dry cloth as shown.

Stick the double-sided tape first to the moisture-proof mat

then in position on the floor.

Note:

• Use of the double-sided tape to secure the charging dock is optional.

• When necessary, remove the double-sided tape slowly to reduce residue glue.

Note:

The robot will not turn on when the battery is low. Place the robot directly onto

the charging dock to begin charging.

The color of the power

indicator indicates the

battery level

• White: Battery level ≥ 20%

• Red: Battery level < 20%

Double-sided tape

Note:

Always use the moisture-proof when placing the charging dock on a wooden floor

11

12

Installation

Connect to the app

➁ Add Device

Open Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device.

5. Quick Setup

➀ Download Xiaomi Home app

Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed

already. Or search "Xiaomi Home" in the app Store to download and install it.

WiFi indicator light

• Off: WiFi disabled

• Slow flashing: Waiting for

connection

• Fast flashing: Connecting

• Steady: WiFi connected

This product works with Xiaomi Home app . Control your device, and interact it and other smart home devices with Xiaomi

Home app.

Note: For specific connection instructions, visit the Roborock website and download guidelines for iOS and Android devices.

Note: The version of the app might have been updated, please follow the instructions based on the current app version. WIFI connection only supports networks in

the 2.4 GHz band, not the 5 GHz band.

The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.

*

➂ Reset WIFI

If you experience any WIFI problems, reset the WIFI to defaults.

Open the top cover to expose the WIFI indicator then press and

hold the button and the button until you hear the

"Reset WIFI" voice prompt. Reset is complete when the WIFI

indicator flashes slowly. The product will then wait for a

connection.

Note: If a mobile phone has never been connected to the product, or if there is a

problem with the connection, reset the WIFI before attempting connection.

➀ Adjust flow rate

Toggle the switch to adjust the flow rate according to your

needs.

➂ Install the mop cloth

Dampen the mop cloth and squeeze it until it stops

dripping. Insert it into the mounting slot in the water tank.

➃ Install the module

Slide the mop module in line with the alignment marks on

the rear of the machine until you hear a "click".

Using the robot

6. Mopping

Note:

• It is recommended that all floors are vacuumed at least three times before the

first mopping session to reduce excessive dirt buildup on the mop.

• Use barrier tape to prevent mopping carpeted areas, or remove carpets prior

to mopping.

• To prevent corrosion or damage, do not use cleaning fluid or disinfectant in the

water tank.

• Cleaning the mop cloth every 60 minutes is recommended to ensure the water

flow rate and cleaning effect.

High

Low

➁ Fill the water tank

Open the water tank, fill it with water, and close it tightly

Installation

13

On/off

Press and hold the button to turn on the robot. The

power indicator will turn on and the robot will enter Standby

mode. If the robot is in Sleep mode, press and hold the

button to turn it off and end the current cleanup

Note:

The robot cannot be turned off when it is charging.

Instructions for use

Start cleanup

Press the button to start cleaning. Once started, the

robot will plan its cleaning route based on its scan of the

area. It cleans along the edges of a zone first and then

moves in a Z-shaped cleaning route to cover the internal

area efficiently and thoroughly.

Note:

• When the charging dock is placed on a wooden floor, always use it with the

moisture-proof mat to prevent moisture damage.

• Remove the mopping module after mopping, empty residual water and clean

the mop cloth to prevent mildew or unpleasant odors.

• Remove the mopping module if not mopping.

Zone 1 has been cleaned. Zone 2 has been cleaned.

Zone 4 is pending. Zone 3 is being cleaned.

8.Remove the mopping module.

After the machine completes cleaning and returns to the

charging dock, press the two side latches inwards and pull

to remove the mop module.

Using the robot

7. Start cleaning.

When the battery is fully charged, the power indicator will

remain lit. Press the button or use the app to start a

cleanup.

Installation

14

Sleep

If the robot is paused for over 10-minutes, it will go to sleep,

and its power indicator will flash slowly.Press any button to

wake it back up.

Note:

• The robot will not go to sleep when it is on the charging dock.

• The robot will automatically shut down if left in sleep mode for more than 12

hours.

Start cleanup

Note:

• Cleaning cannot start if the battery level is too low. Allow the robot to charge

before restarting cleanup.

• Tidy away any cables on the ground (including the power cable of the

charging dock) before cleaning to avoid losing power or damaging either the

robot or the connected device.

• If a cleanup finishes within 10 minutes, cleaning repeats by default.

• If the battery runs low before cleanup is complete, the robot will carry out a

top-up charge before resuming cleanup from where it left off.

Pause

When the robot is cleaning, press any button to pause it.

Then press the button to continue cleaning or the

button to return it to the charging dock and stop the

cleaning cycle.

Note:

Placing a paused robot on the charging dock manually will end the current

cleanup.

Charging

Auto: After cleaning, the robot will automatically return to

the charging dock to recharge.

Manual: In Pause mode, press the button to send the

robot back to the charging dock.

The power indicator will flash slowly as the robot charges.

Note:

If the cleaning cycle was started away from the charging dock and the robot

could not return to the dock after cleaning, it will instead return to its starting

point. Place the robot directly on the dock to recharge it.

Error

If an error occurs while the robot is cleaning, the power

indicator will flash red quickly, and you will hear a voice alert.

See "Troubleshooting" for resolution options.

Note:

• The robot will go to sleep automatically if left in an Error state for over

10-minutes.

• Placing the robot on the charging dock in an error state will stop the current

cleanup.

Reset WiFi

If your phone cannot connect to the robot because you have

changed your router configuration, forgotten your password,

or any other reason, open the top cover to see the WiFi

indicator light, then press and hold the Spot Cleaning button

and the Recharge button until you hear the "Resetting WiFi"

voice alert. When the WiFi indicator light flashes slowly, the

robot has entered network configuration mode.

Note:

If the robot is left connecting to the network for over an hour, its WiFi will be

disabled. Reset WiFi before attempting reconnection.

Instructions for use

15

Scheduled Cleaning

Use the app to set start times for scheduled cleanups.

The robot will return to the charging dock after each cleanup.

Zone Cleaning

Use the app to draw a specific zone for the robot to clean.

Note:

While cleaning the designated zone, the robot may move outside zone borders.

Make sure that there are no cables or obstacles placed close to the cleanup

zone.

Spot Cleaning

In Standby or Pause mode, press and hold the button to

start spot cleaning. This mode is used to clean a 1.5m x

1.5m square area centered on the robot. After cleanup, the

robot will return to the center of the square.

1.5m

Selective Room Cleaning

Select specific rooms for cleaning in the app. In this mode,

the robot will only clean the selected rooms.

A

C

D

B

Note:

• A full map must be created and Map Saving mode switched on before this

function can be used.

• After cleaning starts, the robot may move beyond the defined areas. Make sure

there are no obstacles preventing the robot’s access to the target rooms.

Note:

Starting spot cleaning in pause mode will stop the current cleaning cycle.

Instructions for use

16

Страница загружается ...

Roborock S6P02-02 Руководство пользователя

Roborock S6P02-02 Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов