Mitsubishi Electric α2 Series Инструкция по применению

Тип
Инструкция по применению
ENG
GER
FRE
ITL
ESP
SWE
RUS
α
2 Simple Application Controller
HARDWARE MANUAL
HARDWARE-HANDBUCH
MANUEL DU MATÉRIEL
MANUALE HARDWARE
MANUAL DE HARDWARE
MASKINVARUHANDBOK
РУКОВОДСТВО ПО АППАРАТНОЙ ЧАСТИ
α
2 Simple Application Controllers
Foreword
This manual contains text, diagrams and explanations which will guide the reader in the correct
programming and operation of the α/α2 series controller.
Before attempting to install or use the α/α2 Series Controller this manual should be read and understood.
If in doubt at any stage of the installation of the α/α2 Series Controller always consult a professional
electrical engineer who is qualified and trained to local and national standards which apply to the installation
site.
If in doubt about the operation or use of the α/α2 Series Controller please consult your local Mitsubishi
Electric representative.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
Under no circumstances will Mitsubishi Electric be liable or responsible for any consequential damage that
may arise as a result of the installation or use of this equipment.
All examples and diagrams shown in this manual are intended only as an aid to understanding the text, not
to guarantee operation. Mitsubishi Electric will accept no responsibility for actual use of the product based on
these illustrative examples.
Please contact a Mitsubishi Electric distributor for more information concerning applications in life critical
situations or high reliability.
This manual is subject to change without notice.
2005 MITSUBISHI ELECTRIC CORPORATION
This manual confers no industrial property rights or any rights of any other kind, nor does it confer
any patent licenses. Mitsubishi Electric Corporation cannot be held responsible for any problems
involving industrial property rights which may occur as a result of using the contents noted in this
manual.
ENG-i
ENG
α2 Simple Application Controller
Hardware Manual
Manual number: JY992D97301
Manual revision: N
Date: 4/2018
α
2 Simple Application Controllers
α
2 Simple Application Controllers
ENG-ii
α
2 Simple Application Controllers
ENG-iii
ENG
Guidelines for the Safety of the User and Protection of equipment
This manual provides information for the use of the α2 Series Controllers. The manual has
been written to be used by trained and competent personnel. The definition of such a person
or persons is as follows;
a) Any engineer who is responsible for the planning, design and construction of automatic
equipment using the product associated with this manual should be of a competent
nature, trained and qualified to the local and national standards required to fulfill that
role. These engineers should be fully aware of all aspects of safety with regards to
automated equipment.
b) Any commissioning or service engineer must be of a competent nature, trained and
qualified to the local and national standards required to fulfill that job. These engineers
should also be trained in the use and maintenance of the completed product. This
includes being completely familiar with all associated documentation for the said
product. All maintenance should be carried out in accordance with established safety
practices.
c) All operators of the completed equipment (See Note) should be trained to use that
product in a safe manner in compliance to established safety practices. The operators
should also be familiar with documentation which is connected with the actual operation
of the completed equipment.
Note : The term ‘completed equipment’ refers to a third party constructed device which
contains or uses the product associated with this manual.
For cleaning, perform dry wiping without using chemicals.
Notes on the Symbols Used in this Manual
At various times through out this manual certain symbols will be used to highlight points of
information which are intended to ensure the users personal safety and protect the integrity of
equipment. Whenever any of the following symbols are encountered its associated note must
be read and understood. Each of the symbols used will now be listed with a brief description of
its meaning.
Hardware Warnings
1) Indicates that the identified danger WILL cause physical and property damage.
2) Indicates that the identified danger could POSSIBLY cause physical and property
damage.
3) Indicates a point of further interest or further explanation.
Software Warnings
4) Indicates special care must be taken when using this element of software.
5) Indicates a special point which the user of the associate software element should
be aware of.
6) Indicates a point of interest or further explanation.
α
2 Simple Application Controllers
ENG-iv
Under no circumstances will Mitsubishi Electric be liable or responsible for any
consequential damage that may arise as a result of the installation or use of this equipment.
All examples and diagrams shown in this manual are intended only as an aid to
understanding the text, not to guarantee operation. Mitsubishi Electric will accept no
responsibility for actual use of the product based on these illustrative examples.
Please contact a Mitsubishi Electric distributor for more information concerning applications
in life criticalo situations or high reliability.
Further Information Manual Lists
~ Refer to these manuals.
{ Refer to this manual if necessary.
Refer to the content of these manuals if necessary though it is included in
α2 Hardware
Manual.
Manual Name Manual No. Description
~
α2 Hardware Manual
(This manual)
JY992D97301
This manual contains hardware explanations for
wiring, installation and specification for the
α2
Series controllers.
~
α2 Programming Manual
<English only>
JY992D97101
This manual contains instruction explanations for
the
α2 Series controllers.
{
α Software Manual
<English only>
JY992D74001
This manual contains explanations of operation
of AL-PCS/WIN-E Programming Software.
{
α2 Series Communication
User’s Manual
<English only>
JY992D97701
This manual contains explanations for the setup,
messaging, diagnostics, bit assignments, etc for
communications using the
α2 series controller.
α2 Series Installation Manual
JY992D97501
This manual contains installation explanations
for the
α2 Series controller.
AL2-4EX, AL2-4EX-A2,
AL2-4EYR, AL2-4EYT
Installation Manual
JY992D97401
This manual contains installation explanations
for the AL2-4EX, AL2-4EX-A2, AL2-4EYR and
AL2-4EYT extension module.
AL2-EEPROM-2
Hardware Manual
JY992D96801
This manual contains hardware explanations for
the AL2-EEPROM-2.
AL2-2DA
Installation Manual
JY997D09301
This manual contains installation explanations
for the AL2-2DA.
AL2-2PT-ADP
Installation Manual
JY997D09401
This manual contains installation explanations
for the AL2-2PT-ADP.
AL2-2TC-ADP
Installation Manual
JY997D09501
This manual contains installation explanations
for the AL2-2TC-ADP.
AL-232CAB
Hardware Manual
JY992D76001
This manual contains hardware explanations for
the AL-232CAB.
AL2-GSM-CAB
Hardware Manual
JY992D97201
This manual contains hardware explanations for
the AL2-GSM-CAB.
AL-ASI-BD, AL2-ASI-BD
Hardware Manual
JY992D81401
This manual contains hardware explanations of
wiring, installation and specification, etc. for AL-
ASI-BD and AL2-ASI-BD.
α
2 Simple Application Controllers
ENG-v
ENG
Abbreviations
The following definitions or abbreviations will be used throughout this manual.
The AL-PCS/WIN-E software will be referred to as the VLS software or the programming
software.
The
α2 Series Simple Application Controller may be referred to as the α2 series, the α2
series controller or the main module.
Function Blocks may be referred to as FB(s).
Function Block Diagram may be referred to as FBD.
Input/Output may be referred to as I/O.
Personal Computer may be referred to as PC
Microsoft Windows
®
, Windows
®
95, Windows
®
98, Windows
®
Me, WindowsNT
®
Workstation 4.0, Windows
®
2000, Windows
®
XP and Windows Vista
®
may be referred to
generically as Windows.
Registration
Microsoft Windows
®
, Windows
®
95, Windows
®
98, Windows
®
Me, WindowsNT
®
Workstation 4.0, Windows
®
2000, Windows
®
XP and Windows Vista
®
are either
registered trademarks or trademarks of Microsoft Corporation in the United States and/or
other countries.
The company name and the product name to be described in this manual are the
registered trademarks or trademarks of each company.
α
2 Simple Application Controllers
ENG-vi
α
2 Simple Application Controllers
ENG-vii
ENG
Table of Contents
Guidelines of Safety...................................................................ENG-iii
1. Introduction......................................................................................ENG-1
1.1 Special Features of the α2 Series System.................................................... ENG-2
1.2 Available Models ........................................................................................... ENG-3
1.3 Dimensions and Each Part Name ................................................................. ENG-4
1.4 System Configuration .................................................................................... ENG-6
1.5 Version Up List .............................................................................................. ENG-7
1.6 Applicable Programming Software ................................................................ ENG-7
2. Specifications ..................................................................................ENG-8
2.1 Power Supply Specification ........................................................................... ENG-8
2.2 Input Specification ........................................................................................ ENG-9
2.3 Output Specification .................................................................................... ENG-11
2.4 General Specification .................................................................................. ENG-12
3. Installation .....................................................................................ENG-14
3.1 Installation Mounting Notes ......................................................................... ENG-14
3.2 DIN RAIL Mounting of Main Unit ................................................................. ENG-15
3.2.1 Installation ......................................................................................................... ENG-15
3.2.2 Remove ............................................................................................................. ENG-15
3.3 Direct Mounting of Main Unit ....................................................................... ENG-16
3.4 Install Extension Module(AL2-14MR-*,AL2-24MR-*)................................... ENG-17
4. Wiring ............................................................................................ENG-18
4.1 Installation Wiring Notes.............................................................................. ENG-18
4.2 Wire Size ..................................................................................................... ENG-19
4.3 Power Supply .............................................................................................. ENG-20
4.4 AC Power Supply and Input Wiring ............................................................. ENG-21
4.4.1 AC Power Supply and Input Wiring ................................................................... ENG-21
4.4.2 AL2-4EX-A2 Input Wiring .................................................................................. ENG-21
4.5 DC Power Supply and Input Wiring ............................................................. ENG-22
4.5.1 DC Power Supply and Source (“+” Common) Input Wiring Diagram ................ ENG-22
4.5.2 AL2-4EX Source (“+” Common) Input Wiring Diagram ..................................... ENG-22
4.5.3 DC Power Supply and Sink (“-” Common) Input Wiring Diagram...................... ENG-23
4.5.4 AL2-4EX Sink (“-” Common) Input Wiring Diagram........................................... ENG-23
4.6 Output Relay and Transistor Wiring ............................................................ ENG-24
4.6.1 Relay Output Wiring Diagram main unit (AC and/or DC) .................................. ENG-24
4.6.2 Relay Output Wiring Diagram AL2-4EYR (AC and/or DC)................................ ENG-25
4.6.3 Transistor Output (Source or “+” Common Only) Wiring Diagram AL2-4EYT... ENG-26
5. Terminal Layout............................................................................ENG-27
6. AL2-EEPROM-2 ............................................................................ENG-30
6.1 Installation ................................................................................................... ENG-31
α
2 Simple Application Controllers
ENG-viii
7. AL-232CAB ...................................................................................ENG-32
7.1 Introduction.................................................................................................. ENG-32
7.1.1 External Dimensions ......................................................................................... ENG-32
7.2 Connected to AL-232CAB cable.................................................................. ENG-33
8. AL2-GSM-CAB ..............................................................................ENG-36
8.1 Introduction.................................................................................................. ENG-36
8.1.1 External Dimensions ......................................................................................... ENG-36
8.1.2 System Configuration with using AL2-GSM-CAB.............................................. ENG-37
8.2 Installation ................................................................................................... ENG-38
8.3 Remote Maintenace with a Modem ............................................................. ENG-40
8.3.1 Recommended Modems ................................................................................... ENG-40
8.3.2 RS-232C Straight Cable Between Modem and AL2-GSM-CAB........................ ENG-40
8.3.3 Modem Setting .................................................................................................. ENG-41
9. AL2-ASI-BD (AL2-14MR-*, AL2-24MR-* ).....................................ENG-44
9.1 Introduction.................................................................................................. ENG-44
9.1.1 External Dimensions ......................................................................................... ENG-44
9.1.2 System Configuration ........................................................................................ ENG-45
9.2 Specifications .............................................................................................. ENG-45
9.3 Wiring & Installation..................................................................................... ENG-46
9.3.1 Installation ......................................................................................................... ENG-46
9.3.2 Wiring ................................................................................................................ ENG-47
9.4 Slave Address Setting & Diagnostics .......................................................... ENG-47
9.4.1 Setting Slave Address ....................................................................................... ENG-47
9.4.2 Applicable Error checks..................................................................................... ENG-47
10.DCF77 Radio Clock......................................................................ENG-48
10.1 Introduction.................................................................................................. ENG-48
10.2 System Configuration .................................................................................. ENG-49
10.3 Specifications .............................................................................................. ENG-49
10.4 Wiring .......................................................................................................... ENG-50
10.4.1 Wiring ................................................................................................................ ENG-50
10.4.2 DCF77 Setup from
α2 display .......................................................................... ENG-51
10.4.3 Automatically Start ............................................................................................ ENG-52
10.4.4 Automatically Stop............................................................................................. ENG-52
10.4.5 Verification of Received Time............................................................................ ENG-52
11.AL2-2DA (AL2-14MR-*, AL2-24MR-*)..........................................ENG-54
11.1 Introduction.................................................................................................. ENG-55
11.1.1 External Dimensions ......................................................................................... ENG-55
11.1.2 System Configuration ........................................................................................ ENG-55
11.2 Specification ................................................................................................ ENG-56
11.3 Wiring & Installation..................................................................................... ENG-57
11.3.1 Installation ......................................................................................................... ENG-57
11.3.2 Wiring ................................................................................................................ ENG-58
11.3.3 Applicable Error checks..................................................................................... ENG-59
α
2 Simple Application Controllers
ENG-ix
ENG
12.AL2-2PT-ADP...............................................................................ENG-60
12.1 Introduction.................................................................................................. ENG-61
12.1.1 External Dimensions ......................................................................................... ENG-61
12.2 System Configuration .................................................................................. ENG-61
12.3 Specification ................................................................................................ ENG-62
12.4 Wiring and Installation ................................................................................. ENG-64
12.4.1 Installation ......................................................................................................... ENG-64
12.4.2 Wiring ................................................................................................................ ENG-65
12.4.3 Choosing a Temperature Scale......................................................................... ENG-66
12.4.4 Offset Adjustment.............................................................................................. ENG-67
12.4.5 Gain Adjustment................................................................................................ ENG-68
12.4.6 Fine Offset Adjust.............................................................................................. ENG-70
12.4.7 Applicable Error checks..................................................................................... ENG-71
13.AL2-2TC-ADP ..............................................................................ENG-72
13.1 Introduction.................................................................................................. ENG-73
13.1.1 External Dimensions ......................................................................................... ENG-73
13.2 System Configuration .................................................................................. ENG-73
13.3 Specification ................................................................................................ ENG-74
13.4 Wiring and Installation ................................................................................. ENG-76
13.4.1 Installation ......................................................................................................... ENG-76
13.4.2 Wiring ................................................................................................................ ENG-77
13.4.3 Choosing a Temperature Scale......................................................................... ENG-78
13.4.4 Offset Adjustment.............................................................................................. ENG-79
13.4.5 Gain Adjustment................................................................................................ ENG-80
13.4.6 Fine Offset Adjust.............................................................................................. ENG-82
13.4.7 Applicable Error Checks.................................................................................... ENG-83
14.Key, System Bit and Function Block Lists ....................................ENG-84
14.1 Key Lists ...................................................................................................... ENG-84
14.2 System Bit Lists ........................................................................................... ENG-85
14.2.1 System Bit Lists................................................................................................. ENG-85
14.2.2 Control Bit Lists ................................................................................................. ENG-86
14.3 Function Block Lists..................................................................................... ENG-87
15.Diagnostics...................................................................................ENG-91
15.1 Input Status Error ........................................................................................ ENG-92
15.2 Output Status Error...................................................................................... ENG-92
15.3 TOP MENU is not Displayed ....................................................................... ENG-93
15.4 Cannot enter Run Mode. ............................................................................. ENG-94
15.5 Incorrect Clock Data .................................................................................... ENG-94
15.6 The “?” appears on the Display ................................................................... ENG-94
15.7 Cannot Use an Operation Key..................................................................... ENG-95
15.8 Incorrect LCD display .................................................................................. ENG-96
15.9 Memory Cassette Is Not Working Correctly................................................. ENG-96
15.10Cannot Communicate with the AS-interface Master Module ...................... ENG-97
15.11Cannot Communicate with AL-PCS/WIN-E. ............................................... ENG-98
α
2 Simple Application Controllers
ENG-x
Introduction 1
ENG-1
ENG
1. Introduction
The α2 series can be easily used in all places where control is needed for the home, office, or
factory. The controller outputs cycle ON/OFF to control electrical equipment per the Function
Block program.
The explanation of the instructions and the operation of main unit can be found in
α2
Programming Manual. An explanation of the AL-PCS/WIN-E programming software can be
found in the
α Series Software Manual.
Applications
The
α2 series is designed to be used in automatic applications including those listed below.
- Automation of lights, air-conditioning, or watering systems
- The opening and shutting of gates
- Easy security systems
- Domestic animal and pet food distribution systems
- Control of stockyards and greenhouses
However, the
α2 series is not designed to be used in the following applications. Please contact
your local Mitsubishi Electric representative for more information.
- Applications where high reliabilities such as nuclear power control, railway facilities,
airline facilities, vehicles, combustion equipment, and medical equipment are required.
- Applications in life critical situations.
α
2 Simple Application Controllers
α
2 Simple Application Controllers
Introduction 1
ENG-2
1.1 Special Features of the α2 Series System
1) Display message and Function Block data
The
α2 series can display the state of operation and the alarm on the LCD display as a
message. It can display the following contents by using the display function block. The
value of displayed timers and counters can be changed in the RUN mode.
- Total characters on LCD display: 12 characters × 4 lines
- Display Items: Message, value (current or set) of timer and counter, analog values, etc
2) The programming in the personal computer is fast and easy
The programming software AL-PCS/WIN-E for Windows can create and save programs.
The programming can be done using a pictorial method in which lines are used to connect
function blocks on a programming screen.
Direct programming using the
α2 controller front panel keys is also available.
3) LCD image send via GSM modem
The
α2 (AL2-14MR-*,AL2-24MR-*) series is able to send the LCD image as an E-mail
using a GSM modem. The user can monitor application status by accessing the diagnostic
message sent as an E-mail via GSM modem
4) Supports computer link using dedicated protocol
The
α2 (AL2-14MR-*,AL2-24MR-*)series supports computer link (dedicated protocol).
User-specific application software using computer link can change schedule data,
parameters within Function Blocks and provide condition monitoring of the application.
5) Enhancement of clock function
The weekly timer and the calendar timer function have many switches that can be set and
provide powerful time dependant control capabilities.
6) Analog input, 0 - 10V/0 - 500, -50
°C - 200°C (PT100), -50°C - 450°C (K-type thermocouple):
The DC input for the
α2 series can accept of 0 - 10V signals with a resolution of 0 - 500.
7) Analog output,
0 - 4000/0 - 10V, 0 - 2000/4 - 20mA:
The
α2 series can output voltage and current signals.
8) High speed counter, Max. 1kHz
The
α2 series has high speed counters (Max. 2 points) when using AL2-4EX (EI1, EI2).
9) High current output capability
10)Built-in EEPROM
The built in EEPROM eliminates the need for battery backed data.
11)Supports 7 languages:
The
α2 series supports 7 languages (English, German, French, Italian, Spanish, Swedish,
and Russian
*1
). The displayed language can be selected in the TOP MENU.
*1 V3.00 or later
Table 1.1: High Current Output Capability
Output Type Capability
Relay
AL2-10MR-*: O01 - O04
AL2-14MR-*: O01 - O06
AL2-24MR-*: O01 - O04
8A/Common
AL2-24MR-*: O05 - O09
AL2-4EYR: EO1 - EO4
2A/Point (4A/Common)
Transistor AL2-4EYT: EO1 - EO4 1A/Point
α
2 Simple Application Controllers
Introduction 1
ENG-3
ENG
1.2 Available Models
*1 Without extension modules.
0
*1 When using AL2-2DA, AL2-2PT-ADP or AL2-2TC-ADP, α2 main module must be V2.00
or later.
Table 1.2:Main Units
Model
Power
Supply
Input Output
Dimensions
mm (inches)
MASS
(Weight)
kg (lbs)
Type Number Type Number
AL2-10MR-A
100 - 240V
AC~
100 - 240V
AC~
6RELAY4
71.2 x 90 x 52
(2.8 x 3.54
x 2.05)
0.21
(0.47)
AL2-10MR-D 24V DC
24V DC
Sink/Source
6RELAY4
0.20
(0.44)
AL2-14MR-A
100 - 240V
AC~
100 - 240V
AC~
8RELAY6
124.6 x 90 x 52
(4.91 x 3.54
x 2.05)
0.30
*1
(0.66)
AL2-14MR-D 24V DC
24V DC
Sink/Source
8RELAY6
AL2-24MR-A
100 - 240V
AC~
100 - 240V
AC~
15 RELAY 9
0.35
*1
(0.77)
AL2-24MR-D 24V DC
24V DC
Sink/Source
15 RELAY 9
0.30
*1
(0.66)
Table 1.3:Extension Modules/Adapters
Model
Input Output MASS
(Weight)
kg (lbs)
Type Number Type Number
AL2-4EX-A2 220 - 240V AC~ 4
0.05
(0.11)
AL2-4EX
24V DC, Sink/
Source
4
AL2-4EYR RELAY 4
AL2-4EYT TRANSISTOR 4
AL2-ASI-BD AS-interface Input 4 AS-interface Output 4
AL2-2DA
*1
Analog
(“0 to 10V” or “4 to 20mA”)
2
AL2-2PT-ADP
*1
PT100 Sensor 2 Analog (0 to 10V) 2
AL2-2TC-ADP
*1
Thermocouple
Sensor (K Type)
2 Analog (0 to 10V) 2
α
2 Simple Application Controllers
Introduction 1
ENG-4
1.3 Dimensions and Each Part Name
Figure 1.1: Each Part Name(AL2-10MR-*)
Nameplate printing
is a mark that instructs to use the cable with an appropriate temperature rating
(80°C or more) for wiring.
Figure 1.2: Each Part Name(AL2-14MR-*,AL2-24MR-*)
Nameplate printing
is a mark that instructs to use the cable with an appropriate temperature rating
(80°C or more) for wiring.
OUT4OUT2 OUT3
OUT1
AL2-10MR-D
OK
ESC
+
-
1
23456
DC INPUT
-
(B)(A)
RELAY OUTPUT
90 (3.54")
71.2 (2.8")
6 (0.24")
4 (0.16")
4 (0.16")
6 (0.24")
52 (2.05")
Nameplate
Nameplate
90 (3.54")
124.6 (4.91")
4 (0.16")
4 (0.16")
6 (0.24")
6 (0.24")
52 (2.05")
α
2 Simple Application Controllers
Introduction 1
ENG-5
ENG
Note;
Refer to chapter 7 about dimensions of the AL-232CAB
Refer to chapter 8 about dimensions of the AL2-GSM-CAB.
Refer to chapter 9 about dimensions of the AL2-ASI-BD.
Refer to chapter 11 about dimensions of the AL2-2DA.
Refer to chapter 12 about dimensions of the AL2-2PT-ADP.
Refer to chapter 13 about dimensions of the AL2-2TC-ADP.
Figure 1.3: Dimensions (AL2-4EX, AL2-2EX-A2, AL2-4EYR, AL2-4EYT)
Nameplate printing
is a mark that instructs to use the cable with an appropriate temperature rating
(80°C or more) for wiring.
Table 1.4: Each Part Name
Ref. Item Description
1 Mounting hole, φ4.2 mm
2 Power terminals
3 Input terminals
4 Mounting screw for the extension cover or extension module
5 Extension cover or extension module(AL2-14MR-*,AL2-24MR-*)
6 Groove for DIN rail mounting (Width of DIN rail 35mm <DIN EN 50022>)
7 DIN-RAIL mounting clips
8 Output terminals
9 Operation keys
10 Liquid crystal display
11 Programming port cover
Nameplate
Unit: mm (inches)
24.5 (0.96")
53.1 (2.09")
90 (3.54")
α
2 Simple Application Controllers
Introduction 1
ENG-6
1.4 System Configuration
Figure 1.4: System Configuration(AL2-10MR-*)
Figure 1.5: System Configuration(AL2-14MR-*,AL2-24MR-*)
*1 Further information can be found in chapter 8.
Table 1.5: System Configuration
Item Using Cable
1 AL-232CAB
2 AL2-GSM-CAB
3
RS-232C cross cable
*1
4
RS-232C straight cable for the modem
*1
5 RS-232C straight cable for the modem (specified by Modem manufacturer)
α
2
Series
c
Personal computer
- Programming Software
(AL-PCS/WIN-E)
Standard Connection to the Programming Softoware
α
2
Series
GSM
Modem
Remote Maintenance (via Telephone Line)
Remote Maintenance, e-Mail (via GSM)
de
fg
d
d
c
g
Personal computer
- Programming Software
(AL-PCS/WIN-E)
- Dedicated protocol
- e-Mail application
Cellular Phone
(Supporting SMS message)
Normal Modem Normal Modem
Normal Modem
Sending SMS Message
Using Dedicated Protocol
Standard Connection to the Programming Softoware
α
2 Simple Application Controllers
Introduction 1
ENG-7
ENG
1.5 Version Up List
1.6 Applicable Programming Software
Note;
AL-PCS/WIN-E versions lower than V2.00, do not communicate with the α2 series.
AL-PCS/WIN-E versions lower than V2.30, do not use the AL2-2DA, AL2-2PT-ADP or
AL2-2TC-ADP.
Table 1.6: History of
α2 Series
Version Description
V1.00 First product
V2.00
Supports the following points.
AL2-2DA, AL2-2PT-ADP, AL2-2TC-ADP modules
New function blocks
AO [Analog output] and PID [PID control]
DCF77 Radio clock
V2.20
Supports the following points.
New function blocks
SMR[Short Message Receiving] and CD[Call Detect]
Enhanced User Program Protection
Enhanced Daylight Saving Time Setup
Enhanced Dedicated Protocol Communication
GSM SIM PIN
Modem Initialization String
V3.00
Supports the following points.
Hour Meter backs up by EEPROM (No.197 - 200)
Display Buffer Read by Dedicated Protocol
Russian language addition
Table 1.7: Applicable Programming Software
α2 Version
Programming Software (AL-PCS/WIN-E) Version
V1.00 V2.00 or later
V2.00 V2.30 or later
V2.20 V2.40 or later
V3.00 V2.50 or later
α
2 Simple Application Controllers
Specifications 2
ENG-8
2. Specifications
Note;
Refer to chapter 9 about specification of the AL2-ASI-BD.
Refer to chapter 11 about specification of the AL2-2DA.
Refer to chapter 12 about specification of the AL2-2PT-ADP.
Refer to chapter 13 about specification of the AL2-2TC-ADP.
2.1 Power Supply Specification
Table 2.1: Power Supply Specifications
Description Code Specification
Power Supply
AL2-***-A 100 - 240V AC~, +10% -15%, 50/60 Hz
AL2-***-D 24V DC, +20% -15%
Maximum Momentary Power
Failure
AL2-***-A 10ms
AL2-***-D 5ms
In-rush Current
AL2-***-A,
240V AC~ (120V AC~)
6.5 A (3.5 A) < 5ms
AL2-***-D, 24V DC 7.0 A
Maximum Power
Consumption
AL2-10MR-A, 264V AC~ 4.9 W
AL2-10MR-D, 28.8V DC 4.0 W
AL2-14MR-A, 264V AC~ 5.5 W
AL2-14MR-D, 28.8V DC 7.5 W
AL2-24MR-A, 264V AC~ 7.0 W
AL2-24MR-D, 28.8V DC 9.0 W
Typical Power Consumption
(without Special Connection
Modules)
AL2-10MR-A, 240V AC~ I/O all On - 3.5 W; I/O all Off - 1.85 W
AL2-10MR-A, 120V AC~ I/O all On - 3.0 W; I/O all Off - 1.55 W
AL2-10MR-D, 24V DC I/O all On - 2.5 W; I/O all Off - 0.75 W
AL2-14MR-A, 240V AC~ I/O all On - 4.5 W; I/O all Off - 2.0 W
AL2-14MR-A, 120V AC~ I/O all On - 3.5 W; I/O all Off - 1.5 W
AL2-14MR-D, 24V DC I/O all On - 4.0 W; I/O all Off - 1.0 W
AL2-24MR-A, 240V AC~ I/O all On - 5.5 W; I/O all Off - 2.5 W
AL2-24MR-A, 120V AC~ I/O all On - 4.5 W; I/O all Off - 2.0 W
AL2-24MR-D, 24V DC I/O all On - 5.0 W; I/O all Off - 1.0 W
Fuse
AL2-***-A
AL2-10MR-D
Rating: 250 V 1 A
Type: Time Lag
AL2-14MR-D
AL2-24MR-D
Rating: 250 V 500 mA
Type: Time Lag
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320
  • Page 321 321
  • Page 322 322
  • Page 323 323
  • Page 324 324
  • Page 325 325
  • Page 326 326
  • Page 327 327
  • Page 328 328
  • Page 329 329
  • Page 330 330
  • Page 331 331
  • Page 332 332
  • Page 333 333
  • Page 334 334
  • Page 335 335
  • Page 336 336
  • Page 337 337
  • Page 338 338
  • Page 339 339
  • Page 340 340
  • Page 341 341
  • Page 342 342
  • Page 343 343
  • Page 344 344
  • Page 345 345
  • Page 346 346
  • Page 347 347
  • Page 348 348
  • Page 349 349
  • Page 350 350
  • Page 351 351
  • Page 352 352
  • Page 353 353
  • Page 354 354
  • Page 355 355
  • Page 356 356
  • Page 357 357
  • Page 358 358
  • Page 359 359
  • Page 360 360
  • Page 361 361
  • Page 362 362
  • Page 363 363
  • Page 364 364
  • Page 365 365
  • Page 366 366
  • Page 367 367
  • Page 368 368
  • Page 369 369
  • Page 370 370
  • Page 371 371
  • Page 372 372
  • Page 373 373
  • Page 374 374
  • Page 375 375
  • Page 376 376
  • Page 377 377
  • Page 378 378
  • Page 379 379
  • Page 380 380
  • Page 381 381
  • Page 382 382
  • Page 383 383
  • Page 384 384
  • Page 385 385
  • Page 386 386
  • Page 387 387
  • Page 388 388
  • Page 389 389
  • Page 390 390
  • Page 391 391
  • Page 392 392
  • Page 393 393
  • Page 394 394
  • Page 395 395
  • Page 396 396
  • Page 397 397
  • Page 398 398
  • Page 399 399
  • Page 400 400
  • Page 401 401
  • Page 402 402
  • Page 403 403
  • Page 404 404
  • Page 405 405
  • Page 406 406
  • Page 407 407
  • Page 408 408
  • Page 409 409
  • Page 410 410
  • Page 411 411
  • Page 412 412
  • Page 413 413
  • Page 414 414
  • Page 415 415
  • Page 416 416
  • Page 417 417
  • Page 418 418
  • Page 419 419
  • Page 420 420
  • Page 421 421
  • Page 422 422
  • Page 423 423
  • Page 424 424
  • Page 425 425
  • Page 426 426
  • Page 427 427
  • Page 428 428
  • Page 429 429
  • Page 430 430
  • Page 431 431
  • Page 432 432
  • Page 433 433
  • Page 434 434
  • Page 435 435
  • Page 436 436
  • Page 437 437
  • Page 438 438
  • Page 439 439
  • Page 440 440
  • Page 441 441
  • Page 442 442
  • Page 443 443
  • Page 444 444
  • Page 445 445
  • Page 446 446
  • Page 447 447
  • Page 448 448
  • Page 449 449
  • Page 450 450
  • Page 451 451
  • Page 452 452
  • Page 453 453
  • Page 454 454
  • Page 455 455
  • Page 456 456
  • Page 457 457
  • Page 458 458
  • Page 459 459
  • Page 460 460
  • Page 461 461
  • Page 462 462
  • Page 463 463
  • Page 464 464
  • Page 465 465
  • Page 466 466
  • Page 467 467
  • Page 468 468
  • Page 469 469
  • Page 470 470
  • Page 471 471
  • Page 472 472
  • Page 473 473
  • Page 474 474
  • Page 475 475
  • Page 476 476
  • Page 477 477
  • Page 478 478
  • Page 479 479
  • Page 480 480
  • Page 481 481
  • Page 482 482
  • Page 483 483
  • Page 484 484
  • Page 485 485
  • Page 486 486
  • Page 487 487
  • Page 488 488
  • Page 489 489
  • Page 490 490
  • Page 491 491
  • Page 492 492
  • Page 493 493
  • Page 494 494
  • Page 495 495
  • Page 496 496
  • Page 497 497
  • Page 498 498
  • Page 499 499
  • Page 500 500
  • Page 501 501
  • Page 502 502
  • Page 503 503
  • Page 504 504
  • Page 505 505
  • Page 506 506
  • Page 507 507
  • Page 508 508
  • Page 509 509
  • Page 510 510
  • Page 511 511
  • Page 512 512
  • Page 513 513
  • Page 514 514
  • Page 515 515
  • Page 516 516
  • Page 517 517
  • Page 518 518
  • Page 519 519
  • Page 520 520
  • Page 521 521
  • Page 522 522
  • Page 523 523
  • Page 524 524
  • Page 525 525
  • Page 526 526
  • Page 527 527
  • Page 528 528
  • Page 529 529
  • Page 530 530
  • Page 531 531
  • Page 532 532
  • Page 533 533
  • Page 534 534
  • Page 535 535
  • Page 536 536
  • Page 537 537
  • Page 538 538
  • Page 539 539
  • Page 540 540
  • Page 541 541
  • Page 542 542
  • Page 543 543
  • Page 544 544
  • Page 545 545
  • Page 546 546
  • Page 547 547
  • Page 548 548
  • Page 549 549
  • Page 550 550
  • Page 551 551
  • Page 552 552
  • Page 553 553
  • Page 554 554
  • Page 555 555
  • Page 556 556
  • Page 557 557
  • Page 558 558
  • Page 559 559
  • Page 560 560
  • Page 561 561
  • Page 562 562
  • Page 563 563
  • Page 564 564
  • Page 565 565
  • Page 566 566
  • Page 567 567
  • Page 568 568
  • Page 569 569
  • Page 570 570
  • Page 571 571
  • Page 572 572
  • Page 573 573
  • Page 574 574
  • Page 575 575
  • Page 576 576
  • Page 577 577
  • Page 578 578
  • Page 579 579
  • Page 580 580
  • Page 581 581
  • Page 582 582
  • Page 583 583
  • Page 584 584
  • Page 585 585
  • Page 586 586
  • Page 587 587
  • Page 588 588
  • Page 589 589
  • Page 590 590
  • Page 591 591
  • Page 592 592
  • Page 593 593
  • Page 594 594
  • Page 595 595
  • Page 596 596
  • Page 597 597
  • Page 598 598
  • Page 599 599
  • Page 600 600
  • Page 601 601
  • Page 602 602
  • Page 603 603
  • Page 604 604
  • Page 605 605
  • Page 606 606
  • Page 607 607
  • Page 608 608
  • Page 609 609
  • Page 610 610
  • Page 611 611
  • Page 612 612
  • Page 613 613
  • Page 614 614
  • Page 615 615
  • Page 616 616
  • Page 617 617
  • Page 618 618
  • Page 619 619
  • Page 620 620
  • Page 621 621
  • Page 622 622
  • Page 623 623
  • Page 624 624
  • Page 625 625
  • Page 626 626
  • Page 627 627
  • Page 628 628
  • Page 629 629
  • Page 630 630
  • Page 631 631
  • Page 632 632
  • Page 633 633
  • Page 634 634
  • Page 635 635
  • Page 636 636
  • Page 637 637
  • Page 638 638
  • Page 639 639
  • Page 640 640
  • Page 641 641
  • Page 642 642
  • Page 643 643
  • Page 644 644
  • Page 645 645
  • Page 646 646
  • Page 647 647
  • Page 648 648
  • Page 649 649
  • Page 650 650
  • Page 651 651
  • Page 652 652
  • Page 653 653
  • Page 654 654
  • Page 655 655
  • Page 656 656
  • Page 657 657
  • Page 658 658
  • Page 659 659
  • Page 660 660
  • Page 661 661
  • Page 662 662
  • Page 663 663
  • Page 664 664
  • Page 665 665
  • Page 666 666
  • Page 667 667
  • Page 668 668
  • Page 669 669
  • Page 670 670
  • Page 671 671
  • Page 672 672
  • Page 673 673
  • Page 674 674
  • Page 675 675
  • Page 676 676
  • Page 677 677
  • Page 678 678
  • Page 679 679
  • Page 680 680
  • Page 681 681
  • Page 682 682
  • Page 683 683
  • Page 684 684
  • Page 685 685
  • Page 686 686
  • Page 687 687
  • Page 688 688
  • Page 689 689
  • Page 690 690
  • Page 691 691
  • Page 692 692
  • Page 693 693
  • Page 694 694
  • Page 695 695
  • Page 696 696
  • Page 697 697
  • Page 698 698
  • Page 699 699
  • Page 700 700
  • Page 701 701
  • Page 702 702
  • Page 703 703
  • Page 704 704
  • Page 705 705
  • Page 706 706
  • Page 707 707
  • Page 708 708
  • Page 709 709
  • Page 710 710
  • Page 711 711
  • Page 712 712
  • Page 713 713
  • Page 714 714
  • Page 715 715
  • Page 716 716
  • Page 717 717
  • Page 718 718
  • Page 719 719
  • Page 720 720
  • Page 721 721
  • Page 722 722
  • Page 723 723
  • Page 724 724
  • Page 725 725
  • Page 726 726
  • Page 727 727
  • Page 728 728
  • Page 729 729
  • Page 730 730
  • Page 731 731
  • Page 732 732
  • Page 733 733
  • Page 734 734
  • Page 735 735
  • Page 736 736
  • Page 737 737
  • Page 738 738
  • Page 739 739
  • Page 740 740
  • Page 741 741
  • Page 742 742
  • Page 743 743
  • Page 744 744
  • Page 745 745
  • Page 746 746
  • Page 747 747
  • Page 748 748
  • Page 749 749
  • Page 750 750
  • Page 751 751
  • Page 752 752
  • Page 753 753
  • Page 754 754
  • Page 755 755
  • Page 756 756
  • Page 757 757
  • Page 758 758
  • Page 759 759
  • Page 760 760
  • Page 761 761
  • Page 762 762
  • Page 763 763
  • Page 764 764
  • Page 765 765
  • Page 766 766
  • Page 767 767
  • Page 768 768
  • Page 769 769
  • Page 770 770
  • Page 771 771
  • Page 772 772
  • Page 773 773
  • Page 774 774
  • Page 775 775
  • Page 776 776
  • Page 777 777
  • Page 778 778
  • Page 779 779
  • Page 780 780
  • Page 781 781
  • Page 782 782
  • Page 783 783
  • Page 784 784
  • Page 785 785
  • Page 786 786
  • Page 787 787
  • Page 788 788
  • Page 789 789
  • Page 790 790
  • Page 791 791
  • Page 792 792
  • Page 793 793
  • Page 794 794
  • Page 795 795
  • Page 796 796
  • Page 797 797
  • Page 798 798
  • Page 799 799
  • Page 800 800
  • Page 801 801
  • Page 802 802
  • Page 803 803
  • Page 804 804
  • Page 805 805
  • Page 806 806
  • Page 807 807
  • Page 808 808
  • Page 809 809
  • Page 810 810
  • Page 811 811
  • Page 812 812

Mitsubishi Electric α2 Series Инструкция по применению

Тип
Инструкция по применению

Задайте вопрос, и я найду ответ в документе

Поиск информации в документе стал проще с помощью ИИ