Alpina AL-240 Operating Instructions Manual

WARRANTY

& INSTRUCTIONS

18

83

WARRANTY & INSTRUCTIONS

Alpina Watch International S.A.

8 Route de la Galaise

CH-1228 Plan-les-Ouates

Genève

www.alpina-watches.com

COUV GUARANTEE-2014.indd 1-3 07/03/2014 12:07

We thank you for your choice. Your

watch has been manufactured

with the passion, watchmaking

know-how and high technology

that have distinguished Alpina –

the inventor of the modern sports

watch – since 1883.

By acquiring an Alpina watch you

are now an “Alpinist“, a member of

the Alpina family.

DEAR ALPINIST

COUV GUARANTEE-2014.indd 4-6 07/03/2014 12:07

4 5

CON

TENTS

ENGLSH 18

FRANÇAIS 40

DEUTSCH 62

PORTUGUÊS 84

ESPAÑOL 106

ITALIANO 128

日本語 (にほんご) 150

РУССКИЙ ЯЗЫК 172

中文, 汉语, 漢語 194

한국어 (韓國語) 216

01. OPERATING

INSTRUCTIONS

AL-240 05

AL-280 06

AL-372 07

AL-435 08

AL-525 09

AL-550 10

AL-650 11

AL-710 12

AL-718 13

AL-725 14

AL-750 15

AL-860 16

AL-880 17

7

OPERATING

INSTRUC

TIONS

01

AL-240

AL

240

QUARTZ

CALIBER

WITH

DATE

• Change of time

• Ajustement de l’heure

• Einstellung der Zeit

• Ajuste de la hora

• Acerto da hora

• Aggiustamento dell’ora

• 時刻合わせ

 • Установка даты

• 時間調校

• 시각 변경

• Change of the date

• Ajustement rapide de la date

• Einstellung des Datums

• Cambio de la fecha

• Acerto rápido da data

• Aggiustamento rapido della

data

• 日付合わせ

 • Установка текущего

времени

• 日期調校

• 날짜 변경

• Wind up

• Remonter

• Aufzeihen

• Terminer

• Cuerda

• Carica

 • 卷き上げ

• Положение для завода

механизма

• 上鍊

• 태엽 감기

2

3

1

1 2 3

6

8

9

operating instructions

AL-280

• Change of the date

• Ajustement rapide de la date

• Einstellung des Datums

• Cambio de la fecha

• Acerto rápido da data

• Aggiustamento rapido della data

• 日付合わせ

 • Установка текущего времени

• 日期調校

• 날짜 변경

• Change of time

• Ajustement de l’heure

• Einstellung der Zeit

• Ajuste de la hora

• Acerto da hora

• Aggiustamento dell’ora

• 時刻合わせ

 • Установка даты

• 時間調校

• 시각 변경

21

AL

280

QUARTZ CALIBER

WITH SMALL

SECONDS

AND BIG DATE

AL-372

AL

372

QUARTZ

CHRONOGRAPH

CALIBER WITH SMALL

SECONDS AND

BIG DATE

2

1

3

4

1

2

• Chrono: start / stop

• Chrono : start / stop

• Chrono: start / stop

• Crono: arranque / parada

• Chrono: start / stop

• クロノグラフ :スタ一ト/ストップボタソ

 • Xpoнoгpaф : ctapt / ctoп

 • 計時 : 開始 / 停止

 • 크로노 start / stop 기능

• Change of time

• Ajustement de l’heure

• Einstellung der Zeit

• Ajuste de la hora

• Acerto da hora

• Aggiustamento dell’ora

• 時刻合わせ

 • Установка даты

• 時間調校

• 시각 변경

• Change of the date

• Ajustement rapide de la date

• Einstellung des Datums

• Cambio de la fecha

• Acerto rápido da data

• Aggiustamento della data

• 日付合わせ

 • Установка текущего времени

• 日期調校

• 날짜 변경

• Chrono: zero repositioning of hands

• Chrono : remise à zéro

• Chrono: Nullstellung der Zeiger

• Crono: reposicionamiento de las manecillas

• Chrono: retorno a zero

• Chrono: messa a zero

• クロノグラフ :ゼロリセットボタソ

• Xpoнoгpaф : oбнyлeниe знaчeний cтpeлoк

• 計時 : 把計時針按回到 `0' 位置

• 크로노: 초침을 0으로 재위치하는 기능

1

2

3

4

10

11

operating instructions

AL-435

• Change of time

• Ajustement de l’heure

• Einstellung der Zeit

• Ajuste de la hora

• Acerto da hora

• Aggiustamento dell’ora

• 時刻合わせ

 • Установка даты

• 時間調校

• 시각 변경

• Wind up

• Remonter

• Aufzeihen

• Terminer

• Cuerda

• Carica

 • 卷き上げ

• Положение для завода механизма

• 上鍊

• 태엽 감기

1 2

AL

435

HANDWINDING

CALIBER WITH

SMALL SECONDS

AL-5 25

• Change of time

• Ajustement de l’heure

• Einstellung der Zeit

• Ajuste de la hora

• Acerto da hora

• Aggiustamento dell’ora

• 時刻合わせ

 • Установка даты

• 時間調校

• 시각 변경

• Change of the date

• Ajustement rapide de la date

• Einstellung des Datums

• Cambio de la fecha

• Acerto rápido da data

• Aggiustamento rapido della

data

• 日付合わせ

 • Установка текущего

времени

• 日期調校

• 날짜 변경

• Wind up

• Remonter

• Aufzeihen

• Terminer

• Cuerda

• Carica

 • 卷き上げ

• Положение для завода

механизма

• 上鍊

• 태엽 감기

2 31

AL

525

AUTOMATIC

CALIBER

WITH DATE

2

3

2

1

12

13

operating instructions

• Change of time

• Ajustement de l’heure

• Einstellung der Zeit

• Ajuste de la hora

• Acerto da hora

• Aggiustamento dell’ora

• 時刻合わせ

 • Установка даты

• 時間調校

• 시각 변경

• Wind up

• Remonter

• Aufzeihen

• Terminer

• Cuerda

• Carica

 • 卷き上げ

• Положение для завода механизма

• 上鍊

• 태엽 감기

AL-550

• Change of the GMT hand

• Ajustement du deuxième fuseau horaire (GMT)

• Einstellung der 2. Zeitzone (GMT)

• Cambio de la Zona Horaria (GMT)

• Secundo fuso horário (GMT)

• Aggiustamento dell (GMT)

• GMTせッティング

 • Установка времени втopoго чаcoвoго

пoяca

• 第二時區調校

• 두 번째 시간대 변경

• Change of the date

• Ajustement rapide de la date

• Einstellung des Datums

• Cambio de la fecha

• Acerto rápido da data

• Aggiustamento rapido della data

• 日付合わせ

 • Установка текущего времени

• 日期調校

• 날짜 변경

1

2

3

4

AL

550

AUTOMATIC

CALIBER

WITH

GMT AND DATE

AL-650

• Change of time

• Ajustement de l’heure

• Einstellung der Zeit

• Ajuste de la hora

• Acerto da hora

• Aggiustamento dell’ora

• 時刻合わせ

 • Установка даты

• 時間調校

• 시각 변경

• Wind up

• Remonter

• Aufzeihen

• Terminer

• Cuerda

• Carica

 • 卷き上げ

• Положение для завода механизма

• 上鍊

• 태엽 감기

1 2

AL

650

HANDWINDING

REGULATOR

CALIBER

2

3

4

1

2

1

14

15

operating instructions

AL-710

• Change of time

• Ajustement de l’heure

• Einstellung der Zeit

• Ajuste de la hora

• Acerto da hora

• Aggiustamento dell’ora

• 時刻合わせ

 • Установка даты

• 時間調校

• 시각 변경

• Change of the date

• Ajustement rapide de la date

• Einstellung des Datums

• Cambio de la fecha

• Acerto rápido da data

• Aggiustamento rapido della

data

• 日付合わせ

 • Установка текущего

времени

• 日期調校

• 날짜 변경

• Wind up

• Remonter

• Aufzeihen

• Terminer

• Cuerda

• Carica

 • 卷き上げ

• Положение для завода

механизма

• 上鍊

• 태엽 감기

1 2 3

AL

710

AUTOMATIC

MANUFACTURE

CALIBER

WITH DATE

10

22

9

21

8

20

7

19

6

18

5

17

4

16

3

15

2

14

1

13

24

✷

23

11

AL-718

• Change of time

• Ajustement de l’heure

• Einstellung der Zeit

• Ajuste de la hora

• Acerto da hora

• Aggiustamento dell’ora

• 時刻合わせ

 • Установка даты

• 時間調校

• 시각 변경

• Wind up

• Remonter

• Aufzeihen

• Terminer

• Cuerda

• Carica

 • 卷き上げ

• Положение для завода механизма

• 上鍊

• 태엽 감기

• Change of the city

• Changer la ville

• Einstellen der Stadt

• Cambio de ciudad

• Mudar a cidade

• Cambiare la città

 • 都市の変更

• Смена города

• 更改城市

• 도시 변경

• Change of the date

• Ajustement rapide de la date

• Einstellung des Datums

• Cambio de la fecha

• Acerto rápido da data

• Aggiustamento rapido della data

• 日付合わせ

 • Установка текущего времени

• 日期調校

• 날짜 변경

1

2

3

4

AL

718

AUTOMATIC

WORLDTIMER

MANUFACTURE

CALIBER

1

2

3

2

3

4

1

16

17

operating instructions

AL-725

• Change of the date

• Ajustement rapide de la date

• Einstellung des Datums

• Cambio de la fecha

• Acerto rápido da data

• Aggiustamento della data

• 日付合わせ

 • Установка текущего

времени

• 日期調校

• 날짜 변경

• Wind up

• Remonter

• Aufzeihen

• Terminer

• Cuerda

• Carica

 • 卷き上げ

• Положение для завода

механизма

• 上鍊

• 태엽 감기

знaчeний cтpeлoк

• 計時 : 把計時針按回到 `0' 位置

• 크로노: 초침을 0으로 재위치

하는 기능

• Change of the date

• Ajustement rapide de la date

• Einstellung des Datums

• Cambio de la fecha

• Acerto rápido da data

• Aggiustamento della data

• 日付合わせ

 • Установка текущего

времени

• 日期調校

• 날짜 변경

• Wind up

• Remonter

• Aufzeihen

• Terminer

• Cuerda

• Carica

 • 卷き上げ

• Положение для завода

механизма

• 上鍊

• 태엽 감기

знaчeний cтpeлoк

• 計時 : 把計時針按回到 `0' 位置

• 크로노: 초침을 0으로 재위치

하는 기능

• Chrono: start / stop

• Chrono : start / stop

• Chrono: start / stop

• Crono: arranque / parada

• Chrono: start / stop

• クロノグラフ :スタ一ト/スト

ップボタソ

 • Xpoнoгpaф : ctapt / ctoп

 • 計時 : 開始 / 停止

 • 크로노 start / stop 기능

• Change of time

• Ajustement de l’heure

• Einstellung der Zeit

• Ajuste de la hora

• Acerto da hora

• Aggiustamento dell’ora

• 時刻合わせ

 • Установка даты

• 時間調校

• 시각 변경

• Chrono: zero repositioning

of hands

• Chrono : remise à zéro

• Chrono: Nullstellung der

Zeiger

• Crono: reposicionamiento de

las manecillas

• Chrono: retorno a zero

• Chrono: messa a zero

• クロノグラフ :ゼロリセットボ

タソ

• Xpoнoгpaф : oбнyлeниe

• Chrono: start / stop

• Chrono : start / stop

• Chrono: start / stop

• Crono: arranque / parada

• Chrono: start / stop

• クロノグラフ :スタ一ト/スト

ップボタソ

 • Xpoнoгpaф : ctapt / ctoп

 • 計時 : 開始 / 停止

 • 크로노 start / stop 기능

• Change of time

• Ajustement de l’heure

• Einstellung der Zeit

• Ajuste de la hora

• Acerto da hora

• Aggiustamento dell’ora

• 時刻合わせ

 • Установка даты

• 時間調校

• 시각 변경

• Chrono: zero repositioning

of hands

• Chrono : remise à zéro

• Chrono: Nullstellung der

Zeiger

• Crono: reposicionamiento de

las manecillas

• Chrono: retorno a zero

• Chrono: messa a zero

• クロノグラフ :ゼロリセットボ

タソ

• Xpoнoгpaф : oбнyлeниe

2 2

3 35 5

4 4

1

AL

725

AUTOMATIC

CHRONOGRAPH

CALIBER

WITH DATE

AL-750

AL

750

AUTOMATIC

CHRONOGRAPH

CALIBER

WITH SMALL

SECONDS AND DATE

3

4

5

1

2

3

4

5

1

2

18

19

operating instructions

AL-860

• Change of time

• Ajustement de l’heure

• Einstellung der Zeit

• Ajuste de la hora

• Acerto da hora

• Aggiustamento dell’ora

• 時刻合わせ

 • Установка даты

• 時間調校

• 시각 변경

• Chrono: zero repositioning

of hands

• Chrono : remise à zéro

• Chrono: Nullstellung der Zeiger

• Crono: reposicionamiento de las manecillas

• Chrono: retorno a zero

• Chrono: messa a zero

• クロノグラフ :ゼロリセットボタソ

• Xpoнoгpaф : oбнyлeниe знaчeний cтpeлoк

• 計時 : 把計時針按回到 `0' 位置

• 크로노: 초침을 0으로 재위치하는 기능

• Chrono: start / stop

• Chrono : start / stop

• Chrono: start / stop

• Crono: arranque/parada

• Chrono: start / stop

• クロノグラフ :スタ一ト/ストップボタソ

 • Xpoнoгpaф : ctapt / ctoп

 • 計時 : 開始 / 停止

 • 크로노 start / stop 기능

• Wind up

• Remonter

• Aufzeihen

• Terminer

• Cuerda

• Carica

 • 卷き上げ

• Положение для завода механизма

• 上鍊

• 태엽 감기

1

2

3

4

AL

860

AUTOMATIC

CHRONOGRAPH

CALIBER

“BI-COMPAX“

• Countdown : start / hold

• Compte à rebours : démarrer / arrêter

• Countdown : Start / Zwischenzeit

• La cuenta regresiva : Comenzar / regresiva

• Da contagem regressiva : Iniciar / retenção

• Conto alla rovescia : Partenza / stop

 • カウントダウンのスタート/カウントダウンの継続

• старт обратного отсчета /

остановкаобратного отсчета

• 开始倒计时 / 暂停倒计时

• 카운트다운 시작/카운트다운 정지

• Wind up

• Remonter

• Aufzeihen

• Terminer

• Cuerda

• Carica

 • 卷き上げ

• Положение для завода механизма

• 上鍊

• 태엽 감기

• Change of time

• Ajustement de l’heure

• Einstellung der Zeit

• Ajuste de la hora

• Acerto da hora

• Aggiustamento dell’ora

• 時刻合わせ

 • Установка даты

• 時間調校

• 시각 변경

• Reset countdown

• Remettre le compteur a zéro

• Nullsteller Countdown

• Empezar de zero

• Redeﬁnir contagem regressiva

• Azzeramento

 • カウントダウンのリセット

• обнуление обратного отсчета

• 重置倒计时

• 카운트다운 리셋

1

2 4

3

AL

880

AUTOMATIC

CALIBER WITH

REGATTA

COUNTDOWN

FUNCTION

2

3

4

1

2

3

4

1

60

30

35

5

10

40

15

45

20

50

25

55

A

T

S

5

R

T

1

2

3

4

AL-880

CON

TENTS

2120 | EN |

02. SPECIAL INSTRUCTIONS

2.1 CALIBER AL-550 GMT 19

2.2 CALIBER AL-880

AUTOMATIC COUNTDOWN 20

03. OTHER FUNCTIONS

3.1 ROTATING DIVING BEZEL 24

3.2 MEASUREMENT SCALES 24

3.3 360° ROTATING COMPASS BEZEL 25

3.4 ANTI-MAGNETISM 28

04. WATCH CARE

& WARRANTY

4.1 TAKING CARE OF

YOUR ALPINA WATCH 30

4.2 SERVICE AND SERVICE

INTERVALS 31

4.3 LEATHER AND STRAP CARE 32

4.4 ANTI-REFLECTIVE TREATMENT

OF THE SAPPHIRE CRYSTAL 33

4.5 SCREW-IN CROWN 33

4.6 INTERNATIONAL WARRANTY 33

4.7 GENUINESS 35

05. SERVICE CENTERS 36

23

| EN |

SPECIALS

INSTRU

CTIONS

02

FUNCTIONS: HOURS, MINUTES,

SECONDS, DATE, GMT (2ND TIME

ZONE)

USE OF THE GMT FUNCTION:

The GMT is ﬁtted with an additional,

red-arrow hour hand, setting it instantly

apart from the main hour hand.

This additional hand completes a revo-

lution of the dial in 24 hours and repre-

sents the reference time. The hour hand,

which represents local time, may be

easily set by jumping from hour to hour.

If you are travelling: pull the crown to posi-

tion

2

and set your reference time, using

the graduated scale on the raised dial.

Then, push the crown to position

1

and

adjust the hour hand by one-hour jumps

in order to display the time of the country

you are visiting. This operation is done

without stopping the mechanical move-

ment and therefore without changing the

watch’s other settings.

You can now read the time of the location

from which you have travelled, on a 24-

hour scale, and the time of the place where

you are currently located at a glance!

AL-550

CALIBER

GMT

2.1

AL-550

1

2

22

specials instructions

2524

| EN |

FUNCTIONS: HOURS, MINUTES, 10 MIN. COUNTDOWN

COUNTDOWN

Before starting the countdown, the 5

apertures are the same colour as the

dial. Each aperture represents one mi-

nute. When the gun is ﬁred, start the

counting (press button

1

).

After 1 minute, the ﬁrst aperture becomes

blue and the next 4 are still the colour

of the dial. After 5 minutes, the second

hand is at 12 o’clock and the 5 apertures

are blue. The race ofﬁcial ﬁres again to

conﬁrm the continuation of the start.

If the countdown is stopped, simply stop

the counting on the watch by pressing

button

4

and restarting it when the

countdown resumes, by pressing button

4

again. After 6 minutes, the ﬁrst aper-

ture becomes orange and the next 4 are

still blue. After 9 minutes, 4 apertures

are now orange and the blue of the ﬁnal

aperture has started to disappear.

You should then organise the start of

your boat to pass the line when the 5

apertures are orange and the second

hand is at 12 o’clock.

AL-880

1 1

4 4

AL-880

One minute has passed. 7 minutes 30 seconds have passed.

AL-880

CALIBER

AUTOMATIC

COUNTDOWN

2.2

COUNTDOWN

Before the countdown starts, the 10-mi-

nute revolving disc is grey and the 10 is at

the bottom between indicators 45 and 40.

The ﬁrst 5 minutes are displayed (from 6 to

10). When the gun is ﬁred, start the coun-

ting (press button

1

). After 1 minute, the

5 appears on a blue background and the

10 disappears. After 5 minutes, the se-

cond hand is at 12 o’clock and the 5 aper-

tures are blue. The race ofﬁcial ﬁres again

to conﬁrm the continuation of the start.

If the countdown is stopped, simply stop

the counting on the watch by pressing

button

4

and restarting it when the

countdown resumes, by pressing but-

ton

4

again. After 10 minutes, START

appears. You should then organise the

start of your boat to pass the line when

START appears with the second hand at

12 o’clock.

60

30

35

5

10

40

15

45

20

50

25

55

A

T

S

5

R

T

1

2

3

4

AL-880

60

30

35

5

10

40

15

45

20

50

25

55

A

T

S

5

R

T

1

2

3

4

AL-880

1

4

1

4

27

| EN |specials instructions

26

TACTICAL PLANNER

The Alpina Seastrong Yacht Timer

watches are ﬁtted with a tactical planner,

in the form of a start line drawn on the

dial. A “+“ and a “-“ indicate a favou-

rable or unfavourable starting position at

the starting buoy.

This planner helps the sailor make deci-

sions concerning the boat’s position on

the starting line. To determine the best

position on the starting line, use the

compass on the bezel as follows:

- measure the wind direction with your

compass (anemometer);

- turn the bezel to have the wind angle

at 12 o’clock;

- sail from the starting boat to the starting

line buoy to determine the orientation of

the starting line;

- look where the orientation of the star-

ting line is located on the bezel of your

watch. If the angle is between 9 and 12

o’clock, it is best to start from the buoy

side. If this angle is between 6 and 9

o’clock, it is best to start from the star-

ting boat side.

2.2

OTHER

FUN

CTIONS

03

other functions

28 29

| EN |

Example 1

An essential feature of all Alpina diving

watches is the unidirectional, anti-clo-

ckwise, rotating bezel, used to control

immersion time. The bezel is ﬁtted with

a graduated scale divided into minutes.

The bezel’s working principle is both

simple and reliable. At the beginning of

each immersion, the zero on the bezel

must be aligned with the minute hand. A

simple glance at the position of the mi-

nute hand with respect to the bezel will

show the diver at any moment how much

time has elapsed since the start of the

dive (in minutes).

The unidirectional anti-clockwise rotation

of the bezel is a safety feature that en-

sures that any accidental movement of

the ring will always cause the remaining

diving time to reduce with respect to the

effective remaining diving time.

Measurement scales are scales that es-

tablish a relation between elapsed time

and another variable. The desired infor-

mation in terms of speed (tachymeter),

distance (telemeter) or units (pulso-

meter, productivity meters) is read off

between the central seconds hand of

the chronograph and the corresponding

scale, over a maximum duration of 60

seconds. For the telemeter, it is possible

to make use of the minutes counter by

adding 20 km to the distance indicated

by the central seconds hand for each

minute elapsed.

TACHYMETER SCALE USE

Example 1: calculating the speed of a car.

Measure the time it takes the car to cover a

distance of 1 km. Read off the speed indi-

cated by the central chronograph seconds

hand on the tachymetric scale. In our exa-

mple, the car is travelling at 90 km/h.

3.1

ROTATING

DIVING

BEZEL

3.2

MEASURE-

MENT

SCALES

TELEMETER SCALE USE

Example 2: calculating the distance

between your position and an upcoming

storm. Start the chronograph when you see

the lightning; then stop the chronograph

when you hear the thunder. Read off the dis-

tance indicated by the central chronograph

hand on the telemetric scale. In our example

the storm is 5 km away from your position.

Alpina watches featuring a 360° ro-

tating compass bezel can roughly

determine directions – a particularly

useful feature for orientation sports

and other adventure or alpine sports.

COMPASS USE INSTRUCTIONS

ON ALPINER 4 CHRONOGRAPH

AND ALPINER 4 GMT*

Precautions in using a compass bezel:

- Do not use the compass in situa-

tions where accuracy is critical.

The compass only gives a rough

indication of direction.

- Use the compass where the sun is

visible or its location known.

- Your watch must be set to winter

time. If daylight savings time (sum-

mer time) is in effect in your area,

you must set your watch one hour

behind before using the compass

bezel.

3.3

360°

ROTATING

COMPASS

BEZEL

Tachimètre : 90 km/h Télémètre : 5 km

Example 2

other functions

30 31

| EN |

* When using the Alpiner 4 GMT you can

also use the 24H hand to operate the

compass. To do this, the 24H hand must

indicate your local time.

A) In the northern hemisphere put the

“36” (=North) facing the 24H hand.

Point the hour hand (keeping the dial

level) in the direction of the sun and your

compass is activated.

B) In the southern hemisphere put the

“18” (=South) facing the 24H hand.

Point the hour hand (keeping the dial

level) in the direction of the sun and your

compass is activated.

COMPASS USE INSTRUCTIONS ON

SEASTRONG YACHT TIMER

1. IN THE NORTHERN HEMISPHERE

- Set the “S” (=South) on the rotating

compass bezel to the middle of the

arc between the “60” marker (=12

o’clock) and the hour hand.*

* in the AM period, set the “S” to the left

of the “60” marker (=12 o’clock) and

in the PM period to the right of the “60”

marker (=12 o’clock).

- While keeping the dial level, point the

hour hand in the direction of the sun.

- Now the compass is activated and

you can read the directions on the

rotating compass bezel. The triangle

at “60”, the 90 marker, the S and

the 270 marker indicate North, East,

South and West, respectively.

EXAMPLE 1: It is 10 am in your area.

Set the “S” facing the “5” on the dial

(=half way between 12 o’clock and the

hour hand). Now point the hour hand

(keeping the dial level) in the direction of

the sun and your compass is activated.

EXAMPLE 2: It is 6 pm in your area. Set

the “S” facing the “45” (=3 o’clock) on

the dial (=half way between 12 o’clock

and 6 o’clock). Now point the hour hand

(keeping the dial level) in the direction of

the sun and your compass is activated.

OPERATING INSTRUCTIONS

1. IN THE NORTHERN HEMISPHERE

- Set the “36” (=360°=North) on the

rotating compass bezel facing the

current time on the 24H ring.

- While keeping the dial level, point the

hour hand in the direction of the sun.

- Now the compass is activated and

you can read the directions on the

rotating compass bezel. The 36,

09,18, 27 indicate North, East, South

and West, respectively.

EXAMPLE 1: It is 8 am in your area. Set

the n° 36 facing the 8 on the 24H scale

of the dial. Now point the hour hand

(keeping the dial level) in the direction of

the sun and your compass is activated.

EXAMPLE 2: It is 6 pm in your area. Set

the n° 36 facing the 18 on the 24H scale

of the dial. Now point the hour hand

(keeping the dial level) in the direction of

the sun and your compass is activated.

2. IN THE SOUTHERN HEMISPHERE

- Set the “18” (=180°=South) on the

rotating compass bezel facing the

current time on the 24H ring.

- While keeping the dial level, point the

hour hand in the direction of the sun.

- Now the compass is activated and

you can read the directions on the

rotating compass bezel. The 36,

09,18, 27 indicate North, East, South

and West, respectively.

EXAMPLE 1: It is 8 am in your area. Set

the n° 18 facing the 8 on the 24H scale

of the dial. Now point the hour hand

(keeping the dial level) in the direction of

the sun and your compass is activated.

EXAMPLE 2: It is 6 pm in your area. Set

the n° 18 facing the 18 on the 24H scale

of the dial. Now point the hour hand

(keeping the dial level) in the direction of

the sun and your compass is activated.

other functions

32 33

| EN |

Magnetic ﬁelds can signiﬁcantly impact

the precision of your watch. There are

many sources of magnetic ﬁelds, such

as mobile phones, iPads, computers,

loudspeakers, refrigerators and other

electronic devices. The more powerful

the magnetic ﬁeld the higher the impact

on your watch. All Alpina watches

designated by “4”, i.e. the “Alpiner 4”,

are anti-magnetic. This means that they

have a minimal deviation when exposed

to a certain level of magnetic ﬁeld.

Alpina “4” anti-magnetic watches

conform to the international ISO 764

standard which deﬁnes the resistance of

watches to magnetic ﬁelds. According to

ISO 764 a watch must resist exposition

to a direct current magnetic ﬁeld of 4,800

A/m. The watch must keep its accuracy

to ± 30 seconds/day as measured

before the test in order to be recognised

as a magnetic-resistant watch.

3.4

ANTI-

MAGNETISM

WATCH

CARE &

WARRANTY

04

watch care & warranty

34 35

| EN |

Swimming in salt water: take care

to rinse your watch with fresh water

immediately after your swim.

Magnetism: avoid placing your watch

on iPads, computers, loudspeakers,

mobile phones or refrigerators. These

devices generate powerful magnetic

ﬁelds that can affect the precision of

your watch.

Shocks to the watch: different types

of shocks – whether chemical,

thermal, physical, magnetic or other

– can affect your watch. Take care to

avoid them.

Screw-in crown: to prevent water

or humidity from entering the case,

make sure the crown is always tightly

screwed into the case. Do not use

chronograph pushers under water.

Normal crown: to prevent humidity

from entering the case, make sure

the crown is always pushed back

in the wearing position. Do not use

chronograph pushers under water.

Care and cleaning of metal bracelets,

rubber straps and water-resistant

metal cases: clean with soapy water

and a toothbrush and dry with a soft

cloth.

1

2

3

4

5

6

TAKING

CARE

OF YOUR

ALPINA

WATCH

PLEASE FOLLOW THE BELOW RECOMMENDATIONS, TO ENSURE THAT

YOUR ALPINA WATCH WILL SERVE YOU LOYALLY AND WITH EXCELLENCE

THROUGHOUT THE YEARS.

4.1

Chemical products: avoid direct

contact with chemical cleaning

agents, solvents, detergents,

cosmetics and other chemical

products, as they may damage your

case, bracelet or rubber gaskets.

Temperature: avoid exposure to

temperatures greater than 60°C

(140°F), or below 0°C (32°F).

Also avoid extreme changes in

temperature, such as putting the

watch in extremely cold water after

prolonged exposure to the sun.

Water-resistance: a watch’s water-

resistance cannot be guaranteed in

all situations or for ever. The water-

resistance can be affected by a

shock to the crown, the ageing of

gaskets (for example, due to the

action of chemical products), etc.

Like any other mechanical precision

instrument, it is important to service a

watch at regular intervals to make sure

it performs correctly in time. As a general

rule, and depending on how you use

your watch and the conditions in which

you use it, we advise you to have your

watch serviced every 4 to 5 years.

You can ﬁnd the list of our Ofﬁcial

Retailers and Service Centres at

www.alpina-watches.com.

MECHANICAL WATCHES

The balance wheel in an automatic

Alpina watch swings 28,800 times an

hour and the gear train moves forward

691,200 times in 24 hours. In four years,

this represents over one billion impulses!

We advise you to bring your watch

every 3-4 years to an ofﬁcial Alpina

Retailer or Service Centre, where a

trained watchmaker will meticulously

inspect it before thoroughly cleaning and

lubricating the movement.

7

8

4.2

SERVICE

AND

SERVICE

INTERVALS

9

watch care & warranty

36 37

| EN |

WATER-RESISTANCE

The water-resistance rating of your watch

was determined and checked when it

was manufactured at our workshops.

It does not imply a lifetime guarantee

against water entering into the watch.

Your watch is water-resistant only when

the crown is fully pushed-in against the

case. If your watch has a screw-in crown,

it must be tightly screwed into the case.

Your watch is not water-resistant if the

crown is in the winding or time-setting

positions. Likewise, pushers should not

be operated while the watch is wet or in

water.

Ageing and normal day-to-day handling

affect the water-resistance of your watch.

Avoid temperature extremes (immersing

the watch in cold water after a prolonged

period in the hot sun) that can damage

the gaskets as well as any other shocks

– chemical, physical or other – which

might compromise the technical integrity

of the watch case.

We advise you to bring your watch to an

Ofﬁcial Alpina Retailer or Service Centre

for a water-resistance check every 2-3

years.

We recommend you adhere to the

following indications to keep your leather

strap in good condition for as long as

possible:

Avoid contact with water and

humidity to prevent discolouration

and deformation.

Avoid prolonged exposure to the sun

to prevent discolouration.

Avoid contact with greasy

substances, cosmetic products and

any other chemical agent.

Leather is an organic and permeable

material and therefore will not last for

ever in its original condition. However, if

you adopt the steps above it will last for

many years. You can replace your leather

strap at any Ofﬁcial Alpina Retailer.

1

2

3

4.3

LEATHER

STRAP

CARE

4.6

INTERNA

TIONAL

WAR-

RANTY

The anti-reﬂective treatment of the sap-

phire crystal improves the visibility and

contrast of your watch’s dial. Normal

daily use and wear and tear may cause

marks to appear on the coating. These

are considered normal and are therefore

not covered by the warranty.

4.4

ANTI-

REFLECTIVE

TREATMENT

OF THE

SAPPHIRE

CRYSTAL

Some Alpina watches have a screw-in

crown, which must be unscrewed to

change the time or the date. After use,

the crown must be pressed against the

case and screwed in tightly. Failure to do

so will compromise the water-resistance

of your watch.

4.5

SCREW-IN

CROWN

Your Alpina watch is guaranteed for a

period of two years (24 months) starting

from the purchase date, covering all

manufacturing defects during regular use

as stated in the following terms: Alpina

Watch International S.A. will replace free

of charge any defective component due

to a manufacturing error, duly noted by

our technical services. Your watch is

under warranty for a period of two years

from the date on the Warranty Certiﬁcate,

signed and stamped by an authorised

Alpina Retailer.

watch care & warranty

38 39

| EN |

THIS INTERNATIONAL WARRANTY

DOES NOT COVER:

Theft, loss or acts of God or the

consequences of natural disasters;

The lifetime of the battery;

Normal wear and tear and ageing

(e.g. scratched crystal; alteration of

the colour and/or material of non-

metallic straps and chains, such as

leather, textile or rubber; peeling of

the plating);

Any damage on any part of the

watch resulting from mistreatment

or improper use, lack of care,

negligence, accidents (knocks,

dents, crushing, broken crystal,

etc.), incorrect use of the watch and

non-observance of the operating

instructions provided by Alpina;

Indirect or consequential damages

of any kind resulting from use,

such as non-functioning, defects or

inaccuracy of the Alpina watch;

Defects or damage resulting from

any handling or tampering of the

watch by any party whatsoever other

than a service centre duly authorised

by Alpina (such as for battery

replacement, services or repairs),

or altering of its original condition

beyond Alpina’s control;

The use of batteries other than those

indicated by Alpina.

This warranty is valid only for

wristwatches accompanied by the

guarantee certiﬁcate duly signed, dated

and stamped by the authorised Alpina

Retailer. Both the reference and the

individual registration numbers of the

Alpina watch must be written on the

certiﬁcate.

Any servicing or repair work to your

Alpina watch must be carried out solely

by an Alpina-approved service and repair

centre or the International Warranty is no

longer valid.

The International Warranty does not in

any way cancel, restrict or otherwise

affect any legally recognised consumer

rights or privileges in the country of

purchase of your Alpina watch.

1

2

3

4

5

6

7

4.7

GENUINESS

We are often asked to check if a

Alpina watch is genuine. Ofﬁcial Alpina

retailers attest the genuineness of every

Alpina watch and provide expert and

dependable after-sales servicing, thanks

to their expertise and professional skills,

and to specially adapted equipment.

Alpina Watch International S.A. disclaims

any relationship to, or responsibility for,

any timepiece or other item bearing the

Alpina name, brand, logotype or symbol

offered for sale by anyone not being an

ofﬁcial Alpina retailer.

Purchasing such an item from an

unauthorized party is therefore at the

buyer’s sole risk, particularly in the case

of counterfeit or substandard products

and in case of products purchased on

the Internet.

No explicit or implicit warranty or

servicing or any other obligation

shall ensue for Alpina or for any of its

authorized representatives for products

sold by unauthorized parties and not

accompanied by a duly stamped Alpina

international warranty certiﬁcate.

For the above reasons and in your own

interest, you are invited to acquire only

genuine Alpina timepieces available

exclusively from a legitimate Alpina

ofﬁcial retailer.

Страница загружается ...

Alpina AL-240 Operating Instructions Manual

Alpina AL-240 Operating Instructions Manual

на других языках

Похожие модели бренда

Модели других брендов