Hyundai H-CMD4031 Руководство пользователя

Бренд: Hyundai

Модель: H-CMD4031

Категория: Мультимедиа-приемники для автомобилей

Тип: Руководство пользователя

МУЛЬТИМЕДИЙНЫЙ

DVD/CD/MP3-РЕСИВЕР

СО ВСТРОЕННЫМ 3”TFT-

ДИСПЛЕЕМ И ТВ-ТЮНЕРОМ

MULTIMEDIA DVD/CD/MP3

RECEIVER WITH BUILT-IN

3” TFT DISPLAY AND TV TUNER

Руководство по эксплуатации Instruction manual

H-CMD4031

2 3

Table of contents Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read

this manual carefully before connecting, operating and/or adjusting the product and keep

the manual for reference in the future.

Table of contents

Before you start

Utilization of the product

Important safeguards

Installation/Connection

Installation

General notes

Din Front/Rear-Mount

1. DIN front-mount (Method A)

Dismantling the unit

Trim frame installation

2. DIN rear-mount (Method B)

Detachable control panel

Anti-theft system

Connection

Connection diagram

ISO connection table

Using the ISO connector

Parking wire connection

Reverse cable connection

Operation

Control elements

Front panel

Inner panel

Remote controller

Changing battery

General operations

Reset the unit

Turning the unit on/off

Mode selection

Mute function

Volume control

Setting the sound characteristics

EQ modes

Loudness

Clock setting

Beep

Button backlight color

TFT on/off

AUX in jack

Radio operations

Band select

Audio/Manual tuning

Programming tuner stations

Automatic store/preset scan

Mono/select control

Local radio station search

RDS function

AF function

TA function

PTY (Program Type)

Other parameter setting

TV operations

TV and audio system

Search channels

Save channels

Disc/USB/SD/MMC operations

Insert/Eject disc

MP3/DivX/JPEG file playback

Play/pause/stop

Selecting tracks/chapters

Fast forward/rewind

Repeat playback

Random playback

Goto

Programming the playback

OSD function

Zooming in/out

Slow playback

PBC function

Changing angle

Selecting audio language

Selecting subtitle language

Selecting sound channel

Selecting video system

Menu navigation

ID3 tag information

USB/SD/MMC notes

Inserting SD/MMC card/USB device

System setup

Disc setup

General information

Handling compact discs

Cleaning discs

Cleaning the unit body

Accessories

Troubleshooting guide

Specification

2 3

Table of contents Table of contents

Before you start

If you want to dispose this product, do not mix it with general household waste. There is

a separate collection system for used electronic products in accordance with legislation

that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so, you

will ensure that your disposed product undergoes the necessary treatment, recovery and

recycling and thus prevent potential negative effects on the environment and human health.

Utilization of the product

Important safeguards

• Read carefully through the manual to

familiarize yourself with this unit.

• Keep this manual handy as a reference

for operating procedures and precautions. Do

not allow persons who have not read through

this manual to use this unit.

• “CLASS 1 LASER PRODUCT”

This product contains a laser diode of

higher class than 1. Laser beams from the

optical pickup are dangerous to the eyes. To

ensure continued safety, do not remove any

covers or attempt to gain access to the inside

of the product. Refer all servicing to qualified

personnel.

• Do not allow this unit to come into contact

with liquids. Electrical shock could result. Also,

damage to this unit, smoke, and overheating

could result from contact with liquids or dust.

Protect this unit from moisture.

• Make sure that foreign objects do not get

inside the unit; they may cause malfunctions,

or create safety hazards such as electrical

shock or laser beam exposure.

• The beginning of operation is the moment

of the unit installation. Before use the device

in winter it is recommended to heat up the

passenger compartment during 20 seconds or

to the operation temperature.

• Using the unit with the temperature that

goes beyond the operation temperature greatly

decreases the operation resource of the screen

and other components of the unit and can

result in an outage.

• Disconnect the vehicle’s negative battery

terminal while mounting and connecting the

unit.

• The unit is designed for negative

terminal of the battery, which is connected

to the vehicle metal. Please ensure it before

installation.

• When replacing the fuse, be sure to use

one with an identical amperage rating. Using a

fuse with a higher amperage rating may cause

serious damage to the unit.

• Do not allow the speaker wires to be

shorted together when the unit is switched

on. Otherwise it may overload or burn out the

power amplifier.

• Make sure you disconnect the power supply

and aerial if you will not be using the system for a

long period or during a thunderstorm.

• Make sure you disconnect the power

supply if the system appears to be working

incorrectly, is making an unusual sound, has

a strange smell, has smoke emitting from it

or liquids have got inside it. Let a qualified

technician check the system.

• Always keep the volume low enough so that

you can hear sounds from outside the vehicle.

• Should this product fail to operate

properly, contact your dealer or nearest service

center.

Installation/Connection

Installation

General notes

• Choose the mounting location where the

unit will not interfere with the normal driving

function of the driver.

• Before finally installing the unit, connect

the wiring and make sure that the unit works

properly.

• Consult with your nearest dealer if

installation requires the drilling of holes or other

modifications of the vehicle.

• Install the unit where it does not get in the

driver’s way and cannot injure the passenger if

there is a sudden stop, like an emergency stop.

• If installation angle exceeds 30° from

horizontal, the unit may not perform properly.

• Avoid installing the unit where it would

be subject to high temperature, such as from

direct sunlight, or from hot air, from the heater,

or where it would be subject to dust, dirt or

excessive vibration.

Din Front/Rear-Mount

This unit can be properly installed either

from ‘Front’ (conventional DIN Front-mount) or

‘Rear’ (DIN Rear-mount installation, utilizing

threaded screw Holes at the sides of the unit

chassis). For details, refer to the following

illustrated installation methods.

1. DIN front-mount (Method A)

1. Car dashboard

2. Sleeve

3. Screw

4. Nut (5 mm)

5. Spring washer

6. Screw (5 х 25 mm)

7. Metal strap

8. Flat washer

182

1. Install the sleeve into the dashboard;

ensure it is installed with the correct side and

there are no obstacles (wires, dashboard

elements, etc) for the unit installation.

2. After installing the sleeve into the

dashboard, bend tabs fitting to the size of the

dashboard to fix the sleeve in place.

3. Use the metal strap to fix the rear side of

the unit. Determine a place for fixing and install

the strap as shown in the picture. You can bend

the strap to the needed angle with your hands.

4. Make the necessary wire connections.

Ensure the connections are correct.

5. Install the unit into the sleeve until the side

locks are fixed.

Dismantling the unit

a – Trim frame

b – Frame uninstall direction

c – Release key insertion

Installation/Connection

1. Switch off the unit and detach the front

panel.

2. Insert your fingers into the groove in the

front side of the trim frame (apply some effort to

detach the frame). Pull the frame to detach it.

3. Insert the supplied release keys into the

both sides of the unit body to click, as shown

in the picture. To extract the unit from the

dashboard, pull the release keys or the unit

body to pull it out. Before detaching the unit,

ensure it is not fixed with the metal strap.

Trim frame installation

To install the trim frame, press it to the unit

body and push it to fix it in place. This should

be done before installing the front panel;

otherwise you are not able to install the trim

frame. When the trim frame being installed,

the side with the groove should face down and

fixed first.

2. DIN rear-mount (Method B)

For this method, use the screw holes in the

lateral sides of the unit. Fix the unit with the

help of the factory radio mounting brackets.

1. Select a position in which the screw holes

of the brackets (3) are aligned with the screw

holes in the unit body, and screw in two screws

(2) in each side.

2. Screw.

3. Factory radio mounting brackets.

4. Vehicle dashboard.

5. Lock (remove this part).

The outer trim frame and mounting

sleeve are not used for method of installation.

Detachable control panel

Install the fastening hole on the right side of

the front panel in the right fastening of the unit.

Then insert the left fastening on the panel into

the fixing hole on the left part of the unit. Press

on the upper right part of the panel until a click.

Ensure that the panel is properly fixed.

To detach the front panel, press OPEN

button, then distract the left side of the panel

from the fastening of the unit.

The control panel can easily be

damaged by shocks. After removing it, place

it in a protective case and be careful not to

drop it or subject it to strong shocks. The rear

connector that connects the main unit and the

control panel is an extremely important part. Be

careful not to damage it by pressing on it with

fingernails, pens, screwdrivers, etc.

If the control panel is dirty, wipe off the

dirt with soft, dry cloth only. And use a cotton

swab soaked in isopropyl alcohol to clean the

socket on the back of the control panel.

Anti-theft system

The front panel of this unit can be stored in

the included protective case when not in used

and carried away when you leave the vehicle

to deter theft.

Switch off the power of the unit. Detach the

front panel, then put it to the protective case

and take it with you.

Installation/Connection

Connection

Connection diagram

Radio antenna socket

Video output (yellow)

Rear view camera input (yellow)

RCA line out (left=white; right=red)

TV antenna

Reverse (pink) Parking (purple)

ISO connection table

Location Function

Connector A Connector B

1 - Rear right (+) - Blue

2 - Rear right (-) - Blue/White

3 - Front right (+) - Grey

4 Battery +12V/Yellow Front right (-) - Grey/White

5 Power antenna/Orange Front left (+) - Green

6 Panel light/White Front left (-) - Green/White

7 Ignition key (+12V)/Red Rear left (+) - Brown

8 Ground/Black Rear left (-) - Brown/White

Power antenna wire is intended for power supply of the antenna and for remote control of

an additional amplifier.

8 9

Installation/Connection Operation

Using the ISO Connector

1. If your car is equipped with the ISO

connector, then connect the ISO connectors as

illustrated.

1 2

2. For connections without the ISO

connectors, check the wiring in the vehicle

carefully before connecting, incorrect connection

may cause serious damage to this unit.

Cut the connector, connect the colored leads

of the power cord to the car battery as shown

in the colour code table above for speaker and

power cable connections.

Parking wire connection

Parking brake lead

Brake light

Car frame

Battery

Purple Wire

If Parking cable is connected to hand brake switch, the video display of the TFT monitor will be

controlled by driving status. When the car is moving ahead, if the video disc is played, the screen

shows warning and blank screen. The warning screen will prevent the driver from watching images.

Reverse driving cable connection

Car frame

Rear view video camera lead

Reverse driving light

Gearbox

Pink wire

Battery

If the rear view video camera is connected, the unit automatically switches to camera mode

during reverse driving. The unit returns to the original work mode after the reverse driving is done.

8 9

Installation/Connection Operation

Control elements

Front panel

1. PWR/OFF/TFT button

2. NEXT button

3. TA button

4. SCN button

5. AF button

6. MOD/MUT button

7. IR sensor

8. TFT display

9. OPEN button

10. USB port

1 2 3 4 5 6 7 8 9 10

11 12 13 14 15 16 17 18 19 20 21 22 23

11. BND/NP button

12. PREVIOUS button

13. SELECT button/VOLUME regulator

14. PTY/PLAY/PAUSE button

15. AUDIO TYPE/APS button

16. CLK button

17. 1/OSD/LEFT button

18. 2/RPT/RIGHT button

19. 3/INT/UP button

20. 4/RDM/DOWN button

21. 5/STOP/ENTER button

22. 6/SET/PAU button

23. AUX input

Inner panel

1 2 3 4 5

1. Disc loading slot

2. SD/MMC memory card slot

3. RESET button (hole)

4. Panel status indicator

5. EJECT button

Pressing RESET hole will erase the clock

setting and stored stations.

Panel status indicator lights up when you flip

down the panel and flashes when you remove

the panel.

Operation

Remote controller

1. SETUP button

2. POWER button

3. ANGLE button

4. ZOOM button

5. STOP button

6. PROG button

7. STEREO button

8. Cursor (UP/DOWN/LEFT/RIGHT) buttons

9. REPEAT button

10. AMS button

11. TITLE button

12. OSD button

13. Number buttons

14. SLOW button

15. MODE button

16. SUB-T button

17. MEN/PBC button

18. PLAY/PAUSE button

19. LOCAL button

20. RANDOM button

21. ENTER button

22. SYSTEM button

23. BAND button

24. MUTE button

25. SEL button

26. AUDIO button

27. VOL+/VOL- buttons

28. PREVIOUS/NEXT buttons

29. GOTO button

Changing the battery

1. Press the catch and at the same time pull

out the battery tray.

2. Insert the 1 x lithium battery, type CR

2025 3V with (+) mark facing up. Insert the

battery tray into the remote control.

Operation

Press VOL+/VOL- buttons on the RC or rotate

VOLUME regulator on the panel to adjust the

selected item. Balance is to adjust the balance

between the left and right speakers. Fader is to

adjust the balance between the rear and front

speakers. After you have reached your desired

effect, leave the unit idle in order for the new

setting to take effect.

If the equalizer is set on, bass and treble

are not adjustable.

EQ modes

Press repeatedly SELECT button on the panel

or SEL button on the RC until the display shows

EQ OFF. Press VOL+/VOL- buttons on the RC

or rotate VOLUME regulator on the panel to

choose an equalizer effect: POP => ROCK =>

CLASS => FLAT => EQ OFF. After you have

reached your desired effect, leave the unit idle in

order for the new setting to take effect.

Loudness

Press repeatedly SELECT button on the

panel or SEL button on the RC until the display

shows LOUD ON (LOUD OFF). Press VOL+/

VOL- buttons on the RC or rotate VOLUME

regulator on the panel to select between

LOUD ON/LOUD OFF. LOUD function is to

emphasize the bass output; the word LOUD

ON indicates that the LOUD mode is on.

Clock setting

Press CLK button on the panel to show the

time on the display. Press and hold it, the hour

will be in green. Rotate VOLUME regulator on

the panel or press VOL+/VOL- buttons on the RC

to adjust the hour. Press SEL button on the RC

or SELECT button on the panel, the minute will

be in green. Rotate VOLUME regulator on the

panel or press VOL+/VOL- buttons on the RC to

adjust minutes. Press CLK button to confirm.

Beep

Press repeatedly SELECT button on the

panel or SEL button on the RC until the display

shows BEEP ON (BEEP OFF). Press VOL+/

General operations

Reset the unit

Operating the unit for the first time or after

replacing the car battery, you must reset the

unit. Press RESET button (hole) with a pointed

object, such as a ballpoint pen, to set the unit

to initial state.

When some errors occur, you can also

press RESET button to resume to normal, and

it will erase some memorized functions.

Turning the unit on/off

Press any button on the panel or the RC

(except OPEN button) to turn on the unit. Press

and hold POWER/TFT OFF button on the

panel or press POWER button on the RC to

turn off the unit.

Mode selection

Repeatedly press MOD/MUT button on the

panel or MODE button on the RC to select a

mode: Radio => Disc => USB => Memory card

=> AUX.

The Disc, Card and USB modes are

only available when corresponding storages

are connected to the unit.

Mute function

Press MUTE button on the RC or press and

hold MOD/MUT button on the panel to turn off

the sound. “MUTE ON” appears on the display.

Press the button again or adjust volume to

resume the sound output.

Volume control

Press VOL+/VOL- buttons on the RC or

rotate VOLUME regulator on the panel to

decrease or increase sound volume level.

Setting the sound characteristics

Press repeatedly SELECT button on the

panel or SEL button on the RC to select the

audio setting: VOL (volume) => BAS (bass) =>

TRE (treble) => BAL (balance) => FAD (fader).

12 13

Operation Operation

VOL- buttons on the RC or rotate VOLUME

regulator on the panel to select between BEEP

ON (beep sound will be heard when buttons

are pressed) and BEEP OFF. After you have

reached your desired effect, leave the unit idle

in order for the new setting to take effect.

Button backlight color

Press repeatedly SELECT button on the

panel or SEL button on the RC until the display

shows COLOR1 (COLOR2). Press VOL+/VOL-

buttons on the RC or rotate VOLUME regulator

on the panel to select between COLOR1

(green button backlight) and COLOR2 (red

button backlight). After you have reached your

desired effect, leave the unit idle in order for

the new setting to take effect.

TFT on/off

Press POWER/TFT OFF button on the panel

to switch the TFT display off. Press the button

again to switch the display on.

AUX in jack

AUX-in jack is intended for connecting

external audio equipment to amplify the

sound. If connection is made correctly, the

audio signal from the external source will be

translated through the acoustics of the head

unit. This enables to adjust the volume and

quality of the sounding. For example, you can

connect an MP3-player to listen to tracks using

the car acoustic system.

Radio operations

Band select

Press repeatedly BND/NP button on the

panel or BAND button on the RC to select your

desired radio band in Radio mode: FM1, FM2,

FM3, AM1 (MW1), AM2 (MW2). In each set of

the bands you can store up to 6 preset stations,

making total 30 preset memory stations.

Auto/Manual tuning

• Manual tuning: Press PREVIOUS/NEXT

buttons on the panel or on the RC to manually

adjust the radio frequency.

• Auto tuning: Press and hold PREVIOUS/

NEXT buttons on the panel or on the RC, the

radio will seek to the next up or down strong

and clear frequency station automatically.

Repeat this action to seek for other desired

stations. To stop automatic search, press NEXT

or PREVIOUS button on the panel or on the RC.

Programming tuner stations

There are six numbered preset buttons,

under which you can store and recall stations

for each band. Select the needed frequency,

then press and hold a preset button. The

station will be saved in the memory under

the corresponding number. To recall a stored

station, press the corresponding preset button.

Automatic store/preset scan

• Automatic store: Press and hold AUDIO

TYPE/APS button on the panel or AMS button

on the RC. SCAN ON will be displayed. The

radio will automatically store the 6 strongest

available stations to the 6 preset memories of

the current band. To stop auto store, press this

button again.

• Preset scan: Press AUDIO TYPE/APS

button on the panel or AMS button on the RC.

INTRO ON will be displayed. The receiver

will scan the saved stations in all bands for 5

seconds.

Mono/Stereo control (in FM radio mode)

Press repeatedly SELECT button on the

panel or SEL button on the RC until the

display shows ST ON (ST OFF). Press VOL+/

VOL- buttons on the RC or rotate VOLUME

regulator on the panel to select between ST

ON/OFF. ST ON means stereo reception of

the signal; ST OFF means mono reception

mode. Or press STEREO button on the RC to

switch stereo reception on/off. Improvement

of reception of distant stations can be done

12 13

Operation Operation

by selecting mono mode, which may cut down

some reception noise.

Local radio station search

Press repeatedly SELECT button on the panel

or SEL button on the RC until the display shows

LOC ON (LOC OFF). Press VOL+/VOL- buttons

on the RC or rotate VOLUME regulator on the

panel to select between LOC ON/OFF. LOC ON

means that only local stations are received; LOC

OFF means that both local and distant stations

with weak and strong signal are received.

Or press LOCAL button on the RC to switch

between local and distant station reception.

RDS function

RDS (Radio Data System) service availability

varies with areas. Please understand if RDS

service is not available in you area, the

following service is not available, either.

AF (Alternative Frequencies)

function

Press AF button on the panel to turn the AF

function on or off. When the function is on, AF

symbol will blink on the display.

When the radio signal strength is poor,

enabling the AF function will allow the unit to

automatically search another station with the

same PI (Program Identification) as the current

station but with a stronger signal, so that you

do not have to retune the stations when driving

between different transmitter coverage areas.

PS (Program Service name): the name of

station will be display instead of frequency.

If RDS service is not available in your area,

turn off the AF mode.

TA (Traffic Alarm) function

Press TA button to turn TA function on or

off. When on, the TA symbol will show on the

display.

In TA mode traffic program will be

automatically searched, until the program

is received. When traffic announcement is

received the unit will temporarily switch to the

tuner mode (regardless of the current mode)

and begin broadcasting the announcement.

After the traffic announcement is over, it will

return to the previous mode and volume level.

To interrupt traffic announcement press TA

button shortly; it will not switch off the TA mode.

PTY (Program Type)

This radio will allow you to select the type of

program required, and will search for a station

broadcasting that type of program.

Press PTY/PLAY/PAUSE button to show the

music type. Then press 1 - 6 number buttons

to choose different music programs available.

Press PTY/PLAY/PAUSE button twice to

show the speech type program. Then press 1

- 6 number buttons to choose different speech

programs. Each number button will show 2 or

3 different speech programs for you to choose:

Pop, Rock, Easy, Light, Classics, Other, Jazz,

Country, Nation, Oldies, Folk, News, Affairs,

Info, Sport, Educate, Drama, Culture, Science,

Varied, Weather, Finance, Children, Social,

Religion, Phone IN, Travel, Leisure, Document).

When PTY is selected, the radio starts to

search corresponding PTY information, and

stops if the corresponding PTY information

is detected. If no buttons are pressed within

several seconds, previously selected PTY is

searched. During 1 loop, if desired PTY is not

found, the unit will return to previous mode.

Press PTY/PLAY/PAUSE button for the 3rd

time to switch the PTY function off.

Other parameter setting

To choose the corresponding parameter,

press and hold SELECT button on the panel or

SEL button on the RC, then press it repeatedly

until the display shows the needed parameter.

Press VOL+/VOL- buttons on the RC or rotate

VOLUME regulator on the panel to choose the

needed option. After choosing, please leave

the unit idle to activate.

• TA ALARM/TA SEEK: In TA SEEK mode,

the unit will seek for traffic announcement

program; in TA ALARM mode the alarm is set

Operation

off.

• PI SOUND/MUTE: Choose either PI sound

or PI mute. PI sound refers to the reception

noise when the AF function tries to scan

alternative frequency.

• RETUNE S/L: RETUNE refers to the time

period the unit allows for radio scan when

reception is interrupted. SHORT represents

a time period of 30 seconds and LONG

represents a time period of 90 seconds.

• MASK DPI/ALL: During MASK DPI mode,

the unit will mask only the AF which has

different PI, this is the default mode; during

MASK ALL mode, the unit will mask the AF

which has different PI and no RDS signal with

high field strength.

TV operations

TV and audio system

• Press repeatedly SYSTEM button on the

RC or BND/NP button on the panel to select

one of the available TV systems.

• Press repeatedly AUDIO button on the RC

to select one of the available sound systems.

Search channels

Press AUDIO TYPE/APS button on the panel

or AMS button on the RC to automatically

search and save all available TV channels.

Press and hold PREVIOUS/NEXT buttons on

the panel or RC to adjust the current frequency

step by step.

Save channels

• When a channel is found, press and

hold a number button on the RC. The current

channel will be saved in the corresponding

number position. To call a saved station, press

a number button on the RC.

• Press PREVIOUS/NEXT buttons on the

RC or panel to go to previous or next saved

channel.

Disc/USB/SD/MMC operations

Insert/Eject disc

• Open the front panel and insert a disc into

the disc slot with label side up. The disc will be

automatically loaded into the unit. The first file

in the root folder will be played. Close the front

panel.

• Open the front panel and press EJECT

button to eject the disc from the slot. If the disc

is not removed from the slot within several

seconds, it will be automatically loaded into

the slot again. When the disc is ejected and

removed, the unit will automatically switch to

another mode.

Manufacturer guarantees regular

playback of licensed discs only. Some AVI

files cannot be played due to their parameters

and recording conditions. Video files more

than 2 Gb having AVI extension can be played

partially.

MP3/DivX/JPEG file playback

When you insert a storage containing MP3/

DivX/JPEG files, the screen will show following

interface:

1. Music/Photo/Video

2. Playback status

3. Track number/track name/folder name

(depending on the format)

4. Current track playback elapsed/remaining

time

Operation

Press STOP button on the RC or press and

hold 5/STOP/ENTER button on the panel; the

disc menu will be displayed as follows:

1 2

1. Folder list

2. File list

You can select the needed folder or file by

pressing cursor buttons. Press ENTER button on

the RC or 5/STOP/ENTER button on the panel.

If you are using a multi-format storage, press

repeatedly MEN/PBC button on the RC to

select between music, photo and video files.

Play/Pause/Stop

During playback press PLAY/PAUSE button

on the RC or press and hold 6/SET/PAU

button on the panel to pause playback. Do this

operation again to resume playback. To stop

playback, press STOP button on the RC or press

and hold 5/STOP/ENTER button on the panel.

Selecting tracks/chapters

During playback press PREVIOUS button on

the panel or on the RC to play the previous track/

chapter (depending on the format). Press NEXT

button on the panel or on the RC to play the next

track/chapter. Press number buttons (0-9) on the

RC to select the desired track/chapter.

Fast forward/rewind

Press and hold repeatedly PREVIOUS

or NEXT button on the panel or RC for fast

backward or forward playing correspondingly.

With each pressing and holding playback speed

will increase as follows: x2 => x4 => x8 => x20

=> Normal. While fast playback, press PLAY/

PAUSE button on the RC or PTY/PLAY/PAUSE

button on the panel to resume normal speed.

Repeat playback

Press and hold 2/RPT/RIGHT button on

the panel or press REPEAT button on the RC

repeatedly for repeat playing in different modes:

track/chapter repeat, folder repeat, disc repeat,

repeat cancel (depending on the format used).

Intro playback

Press and hold 3/INT/UP button on the panel

to activate introduction playback function.

Several initial seconds of each track will be

played. Press and hold the button again to

cancel intro playback.

Random playback

Press RANDOM button on the RC or press

and hold 4/RDM/DOWN button on the panel to

activate random playing mode. Press one more

time to return to normal playing.

Goto

Press GOTO button to show the playback

parameters for the current chapter/track/

time (track/title/chapter number or time).

Press cursor buttons to navigate between the

parameters and use number buttons to input

needed settings. Press ENTER button on the

RC or 5/STOP/ENTER button on the panel to

start playback from the set number or time.

Programming the playback

• Press PROG button on the RC to open

program menu.

• Use cursor buttons to select the program

position and use number buttons to input the

desired track/title/chapter (depending on the

disc type).

• Press PLAY/PAUSE button to start

program play, or move the cursor to select

PLAYING and press ENTER button on the RC

or 5/STOP/ENTER button on the panel to play.

• Move the cursor to CLEAR, press ENTER

Operation

button on the RC or 5/STOP/ENTER button on

the panel to delete the programmed list. Press

PROG button to quit programming.

OSD (On Screen Display) function

Press OSD button on the RC or press and

hold 1/OSD/LEFT button on the RC repeatedly

to show current playback information, such

as number of track/chapter/title, current track/

chapter/title time elapsed/remaining, total track/

chapter/title time remaining (depending on the

disc type).

Zooming in/out

During playback of video or images, press

repeatedly ZOOM button on the RC, the

picture will be zoomed in the sequence: X2

=>X3 =>X4 =>X1/2 => X1/3 => X1/4 =>

Normal. When the image is zoomed in, you

can move it by pressing cursor buttons.

Slow playback

During playback press repeatedly SLOW

button on the RC to select the speed of slow

playback: 1/2 => 1/3 => 1/4 => 1/5 => 1/6 => 1/7

=> Normal. While slow playback, press and hold

6/SET/PAU button on the panel or PLAY/PAUSE

button on the RC to resume normal playback.

PBC (Playback Control) function (for

VCD only)

This function is only available for the VCD

with PBC function. Press and hold MEN/PBC

button on the RC to set PBC on/off; when PBC

is off, the screen will show PBC menu if you

switch PBC on. If the menu consists of a list

of titles, you can select a desired one using

number buttons on the RC.

Changing angle (for DVD only)

Press ANGLE button on the RC to playback

images at different camera angles. If a disc

doesn’t support multi-angle playback, this

function will not work.

Selecting audio language (for DVD

only)

During DVD disc playback, press AUDIO

button on the RC repeatedly to select the audio

language to listen. This function will not work

if a disc does not support multi-language audio.

Selecting subtitle language (for DVD

only)

If your DVD disc supports multi-language

subtitle, press SUB-T button on the RC

repeatedly to switch among disc-supported

languages.

Selecting sound channel

During VCD/CD disc playback repeatedly

press AUDIO button on the RC or press and hold

AUDIO/TYPE/APS button on the panel to select

the channel: Mono left => Mono right => Stereo.

Selecting video system

While video playback, press repeatedly

SYSTEM button on the RC or BND/NP button

on the panel to select the video system (NTSC/

PAL/PAL60/AUTO).

Menu navigation

• Press MEN/PBC button on the RC to

activate the disc menu list on the screen.

Choose the desired item with cursor buttons.

Press ENTER button on the RC or 5/STOP/

ENTER button on the panel to confirm the

selected item and start playing.

• When playing a DVD, press TITLE button

on the RC to go to the title list of the disc.

Title and menu are only available if the

disc has these functions.

ID3 Tag function

If an MP3 file has ID3-tag information in

the supported format, such information will be

displayed while playback.

USB/SD/MMC notes

• USB format supports 2.0. Capacity: up to

32 Gb.

• For correct and satisfactory operation,

Operation

licensed SD/MMC memory cards of famous

brands should be used with this unit. Avoid

using memory cards of unknown brands.

Capacity: up to 32 Gb.

Inserting SD/MMC card/USB device

Insert an MMC/SD card or a USB device into

MMC/SD slot or USB slot. Then the playing

mode will be changed into Card or USB mode

automatically. The first card/USB device track

playback will start. If the unit is afterwards

switched to another mode, press MOD/MUT

button on the panel or MODE button on the RC

to select USB or memory card mode.

All the operations with files stored in

a memory card or USB are the same as

described in Disc Operations for file discs.

System setup

Press SETUP button on the RC or 6/SET/

PAU button on the panel to display setup

screen, use UP/DOWN cursor buttons to select

the desired setup page: System, Disc. Press

RIGHT cursor button to go to the selected

page item list. In the selected page select an

item using UP/DOWN cursor buttons, then

press ENTER button on the RC or 5/STOP/

ENTER button on the panel to go to setting list.

Use UP/DOWN cursor buttons to select the

needed setting. Press ENTER button on the

RC or 5/STOP/ENTER button on the panel to

confirm your selection. Press SETUP button on

the RC or 6/SET/PAU button on the panel to go

the previous menu page.

System setup

SETUP MENU

SYSTEM NTSC/PAL

ADJUST

TV RATIO

DISC

NTSC/PAL

Select the TV system in the setting menu

(NTSC, PAL, PAL-60, AUTO).

Adjust

Adjust brightness, contrast, hue, saturation

and sharpness of the image.

TV Ratio

Select TV type to watch wide screen movies.

4:3 PS: For 4:3 TV, left and right edges will

be cut.

4:3 LB: For 4:3 TV, black bars will appear on

top and bottom.

16:9 Wide: For 16:9 wide screen TV.

Disc setup

SETUP MENU

SYSTEM OSD LANG

SUDIO LANG

SUBTITLE LANG

PASSWORD

RATING

DISC

Operation

OSD language

Select the language to be used for the on-

screen display.

Audio language

Select the language to be used for the audio.

You can select a preferred audio from those

included on the DVD video disk.

Subtitle language

Select the language to be used for subtitles.

You can select a preferred subtitle from those

included in the DVD Video disk.

Password

Change the password. The initial factory

password is 0000. You can set your own

password. If you forget your own password,

you can use 0000 as general password.

Rating

The control level is for parental to control

playing content and protect your children from

violence and erotic. The disc, the level of which

is higher than the setting level can not be played.

The rating can be selected only under the

password unlocked status, and the limits can be

worked only under the password locked status.

Cleaning the unit body

Wipe with a soft cloth. If the cabinet is very

dampen (not dropping wet) the cloth with a

weak solution of soapy water, and then wipe

clean.

Accessories

1. Receiver

2. Front panel

3. Protective case

4. Remote controller

5. ISO connector

6. Mounting parts:

Nut

Spring washer

Flat washer

Screw M5

Screw M5x5

Metal strap

Release key

7. Instruction manual

8. Warranty card

9. Consumer information

General information

Handling compact discs

• Do not insert anything other than a CD into

the CD loading slot.

• Do not use cracked, chipped, warped, or

otherwise damaged discs as they may cause

skipping or noise damage the player.

• Handle the disc only by the edges (as

shown in the picture). To keep discs clean do

not touch its surface.

• Store discs in their cases when not in use.

• Do not expose discs to direct sunlight,

high humidity, high temperature or dust.

• Prolonged exposure to extreme

temperature (such as leaving the discs in your

car during summertime) can wrap a disc.

• Do not attach labels, write on or apply

chemicals to the surface of the discs.

• Do not touch the recorded surface of the

discs.

• Use 12-cm CDs. Use only conventional,

fully circular discs. Do not use shaped discs.

Cleaning discs

Fingerprints should be carefully wiped from

the surface of disc with a soft cloth. Unlike

conventional records, compact discs have no

grooves to collect dust and macroscopic dirt,

so gently wiping them with a soft cloth should

remove must panicles. Wipe in a straight

motion from the center to the edge.

Never use thinner benzine, record cleaner

or anti static spray on a compact disc. Such

chemicals can damage its plastic surface.

1 pc

2 pcs

1 pc

2 pcs

1 pc

20 21

General information General information

Troubleshooting

Below is a table describing simple measures that can help you eliminate most problems likely

to emerge when this unit is in use. If below measures do not help, turn to a service center or to the

nearest dealer.

Symptom Cause Solution

No power The car ignition is not on. If the power supply is properly connected

to the car accessory switch the ignition

key to “ACC”.

The fuse is blown. Replace the fuse.

No sound Volume is in minimum. Adjust volume to a desired level.

Wiring is not properly

connected.

Check wiring connection.

Bad sound quality The installation angle is more

than 30 degrees.

Adjust the installation angle to less than

30 degrees.

The disc is extremely dirty or

defective.

Clean the compact disc/try to play a new

one.

Disc cannot be

loaded or ejected

The unit already contains a

disc.

Remove the disc in the player then put a

new one.

Moisture condensation. Leave the unit idle for an hour, then retry.

Disc cannot be

read

The disc is inserted upside

down.

Insert the compact disc with the label

side facing upward.

Compact disc is extremely

dirty or defective.

Clean the disc or try to play a new one.

Temperature inside the car is

too high.

Cool off until the ambient temperature

returns to normal.

Buttons do not

work

The built-in microcomputer is

not operating properly.

Reset the unit with the help of RESET

button.

Front panel is not properly fix

into its place.

Install the front panel properly.

The radio does

not work

The antenna cable is not

connected.

Insert the antenna cable properly.

The radio station

automatic tuning

does not work

The signals are too weak. Select stations manually.

Страница загружается ...

Hyundai H-CMD4031 Руководство пользователя

Бренд: Hyundai

Модель: H-CMD4031

Категория: Мультимедиа-приемники для автомобилей

Тип: Руководство пользователя

Скачать PDF

сообщить о нарушении

Hyundai H-CMD4031 Руководство пользователя

Hyundai H-CMD4031 Руководство пользователя

Похожие модели бренда

Модели других брендов