Electrolux EWF146410W Руководство пользователя

user manual

Упатство за ракување

Инструкция по

эксплуатации

Washing Machine

Машина за перење

Стиральная машина

EWF 106410 W

EWF 126410 W

EWF 146410 W

Electrolux. Thinking of you.

Share more of our thinking at www.electrolux.com

Contents

Safety information 2

Product description 4

Control panel 5

First use 8

Personalisation 8

Daily use 8

Helpful hints and tips 11

Washing programmes 13

Care and cleaning 15

What to do if... 19

Technical data 22

Consumption values 22

Installation 23

Electrical connection 26

Environment concerns 26

Subject to change without notice

Safety information

Important! Read carefully & keep for future

reference.

• The safety of Your appliance complies with

the industry standards and with legal re-

quirements on the safety of appliances.

However, as manufacturers, we feel it is

our duty to provide the following safety

notes.

• It is most important that this instruction

book should be retained with the appli-

ance for future reference. Should the ap-

pliance be sold or transferred to another

owner, or should you move house and

leave the appliance, always ensure that the

book is supplied with the appliance in or-

der that the new owner can get to know

the functioning of the appliance and the

relevant warnings.

• You MUST read them carefully before in-

stalling or using the appliance.

• Before first starting up, check the appli-

ance for any damage incurred during

transport. Never connect up a damaged

appliance . If parts are damaged, contact

your supplier.

• If the appliance is delivered in the winter

months when there are minus tempera-

tures. Store it at room temperature for 24

hours before using for the first time.

General safety

• It is dangerous to alter the specifications or

attempt to modify this product in any way.

• During high temperature wash pro-

grammes the door glass may get hot. Do

not touch it!

• Make sure that small pets do not climb into

the drum. To avoid this, please check into

the drum before using.

• Any objects such as coins, safety pins,

nails, screws, stones or any other hard,

sharp material can cause extensive dam-

age and must not be placed into the ma-

chine.

• Only use the advised quantities of fabric

softener and detergent. Damage to the

fabric can ensue if you over-fill. Refer to the

manufacturer’s recommendations of

quantities.

• Wash small items such as socks, laces,

washable belts etc in a washing bag or pil-

low case as it is possible for such items to

slip down between the tub and the inner

drum.

• Do not use your washing machine to wash

articles with whalebones, material without

hems or torn material.

• Always unplug the appliance and turn off

the water supply after use, cleaning and

maintenance.

• Under no circumstances should you at-

tempt to repair the machine yourself. Re-

pairs carried out by inexperienced people

may cause injury or serious malfunction-

ing. Contact your local Service Centre. Al-

ways insist on genuine spare parts.

Installation

• This appliance is heavy. Care should be

taken when moving it.

• When unpacking the appliance, check that

it is not damaged. If in doubt, do not use it

and contact the Service Centre.

2 electrolux

• All packing and transit bolts must be re-

moved before use. Serious damage can

occur to the product and to property if this

is not adhered to. See relevant section in

the user manual.

• After having installed the appliance, check

that it is not standing on the inlet and drain

hose and the worktop is not pressing the

electrical supply cable against the wall.

• If the machine is situated on a carpeted

floor, please adjust the feet in order to al-

low air to circulate freely under the appli-

ance.

• Always be sure, that there is no water leak-

age from hoses and their connections after

the installation.

• If the appliance is installed in a location

subject to frost, please read the “dangers

of freezing” chapter.

• Any plumbing work required to install this

appliance should be carried out by a quali-

fied plumber or competent person.

• Any electrical work required to install this

appliance should be carried out by a quali-

fied electrician or competent person.

Use

• This appliance is designed for domestic

use. It must not be used for purposes other

than those for which it was designed.

• Only wash fabrics which are designed to

be machine washed. Follow the instruc-

tions on each garment label.

• Do not overload the appliance. See the

Washing Programme Table.

• Before washing, ensure that all pockets

are empty and buttons and zips are fas-

tened. Avoid washing frayed or torn arti-

cles and treat stains such as paint, ink,

rust, and grass before washing. Under-

wired bras must NOT be machine washed.

• Garments which have been in contact with

volatile petroleum products should not be

machine washed. If volatile cleaning fluids

are used, care should be taken to ensure

that the fluid is removed from the garment

before placing in the machine.

• Never pull the power supply cable to re-

move the plug from the socket; always

take hold of the plug itself.

• Never use the appliance if the power sup-

ply cable, the control panel, the working

surface or the base are damaged so that

the inside of the washing machine is ac-

cessible.

Child safety

• This appliance is not intended for use by

person (including children) with reduced

physical sensory or mental capabilities or

lack of experience and knowledge unless

they have been given supervision or in-

struction concerning use of the appliance

by a person responsible for their safety.

• Children should be supervised to ensure

that they do not play with the appliance.

• The packaging components (e.g. plastic

film, polystyrene) can be dangerous to chil-

dren - danger of suffocation! Keep them

out of children’s reach.

• Keep all detergents in a safe place out of

children’s reach.

• Make sure that children or pets do not

climb into the drum. To prevent children

and pets becoming trapped inside the

drum the machine incorporates a special

feature. To activate this device, rotate the

button (without pressing it) inside the door

clockwise until the groove is horizontal. If

necessary use a coin.

To disable this device and restore the pos-

sibility of closing the door, rotate the but-

ton counterclockwise until the groove is

vertical.

electrolux 3

Product description

Your new appliance meets all modern requirements for effective treatment of laundry

with low water, energy and detergent consumption. Its new washing system allows total

use of detergent and reduces water consumption so saving energy.

1 2

3

4

5

6

1 Detergent dispenser drawer

2 Control panel

3 Door opening handle

4 Rating Plate

5 Drain pump

6 Adjustable feet

Detergent dispenser drawer

Compartment for detergent used for pre-

wash and soak phase or for stain remover

used during the stain action phase (if availa-

ble). The prewash and soak detergent is

added at the beginning of the wash pro-

gramme. The stain remover is added during

the stain action phase.

Compartment for powder or liquid deter-

gent used for main wash. If using liquid de-

tergent pour it just before starting the pro-

gramme.

Compartment for liquid additives (fabric

softener, starch).

Follow the product manufacturer’s recom-

mendations on quantities to use and do not

exceed the «MAX» mark in the detergent

dispenser drawer. Any fabric softener or

starching additives must be poured into the

compartment before starting the wash pro-

gramme.

4 electrolux

Programme Chart

Various programme charts in different lan-

guages are supplied with the appliance. One

is on the front side of the detergent dispenser

drawer and the others are attached into the

user manual assy. The chart in the drawer

can be replaced easily: remove the chart

from the drawer by pulling it towards the right

and insert the chart with the language re-

quired.

Control panel

Below is a picture of the control panel. It shows the programme selector dial as well as

the buttons, pilot light and the display. These are presented by relevant numbers on the

following pages.

1 2 4 6 7

8

9

3 5

10

1

Programme selector dial

2 TEMPERATURE button

3 SPIN reduction button

4 PREWASH button

5 EXTRA RINSE button

6

DELAY START button

7 Display

8 START/PAUSE button

9 DOOR LOCKED pilot light

10 TIME MANAGER buttons

Table of symbols

= Cottons = Sport Light

= Synthetics = Special programmes

= Delicates = Temperature

= Wool = Cold wash

= Silk = Night cycle

= Lingerie = Rinse hold

= Drain = Prewash

= Rinse = Extra Rinse

= Spin = Delay Start

= Economy = Start/Pause

= Easy Iron = Door locked

electrolux 5

= Jeans = Time Manager (Time Manager)

= Sport Intensive = Child lock

Programme Selector Dial

It allows you to switch the appliance on/off

and/or to select a programme.

Temperature

This button allows you to increase or de-

crease the washing temperature.

Spin speed Reduction

By pressing this button you can reduce the

maximum spin speed allowed for the selec-

ted programme or to select the available op-

tion(s).

Rinse hold

By selecting this function the water of the last

rinse is not emptied out to prevent the fabrics

from creasing. Before opening the door it will

be necessary to empty out the water. To

empty out the water, please read the para-

graph «At the end of the programme».

Night Cycle

By selecting this function the machine will not

drain the water of the last rinse and all spin-

ning phases will be suppressed, so as not to

wrinkle the laundry. This washing cycle is

very quiet and it can be selected at night or

in times with a more economical power rate.

On some programmes the rinses will be per-

formed with more water. Before opening the

door it will be necessary to empty out the

water. To empty out the water, please read

the paragraph «At the end of the pro-

gramme».

Prewash

By selecting this option the machine per-

forms a prewash cycle before the main wash

phase. The washing time will be prolonged.

This option is recommended for heavily

soiled laundry.

Extra Rinse

This appliance is designed to save energy. If

it necessary to rinse the laundry using an ex-

tra quantity of water (extra rinse), select this

option. Some additional rinses will be per-

formed. This option is recommended for

people who are allergic to detergents, and in

areas where the water is very soft.

Delay Start

The programme can be delayed from 30 min

- 60 min - 90 min, 2 hours and then by 1 hour

up to a maximum of 20 hours by means of

this button.

Start Pause

This button allows you to start or to interrupt

the selected programme.

Time Manager (Time Manager)

These buttons let you to change the pro-

gramme duration automatically proposed by

the appliance.

Door locked pilot light

The pilot light 9 illuminates when the pro-

gramme starts and indicates if the door can

be opened:

• light on: the door cannot be opened. The

machine in working or has stopped with

water left in the tub.

• light off: the door can be opened. The pro-

gramme is finished or the water has been

emptied out.

• light flashing: the door is opening

6 electrolux

Display

7.4 7.5 7.1

7.27.3

The display shows the following information:

7.1:

• Duration of the selected programme

After selecting a programme, the duration

is displayed in hours and minutes (for ex-

ample 2.05 ). The duration is calculated

automatically on the basis of the maximum

recommended load for each type of fabric.

After the programme has started, the time

remaining is updated every minute.

• Delayed start

The Selected delay set by pressing the rel-

evant button appears on the display for

few seconds, then the duration of the se-

lected programme is displayed again.

• Alarm codes

In the event of operating problems, some

alarm codes can be displayed, for example

E20 (see paragraph «What to do if...»).

•

Incorrect option selection

If an option which is not compatible with

the set wash programme is selected, the

message Err is displayed at the bottom of

the display for a few seconds and the in-

tegrated red light of button 8 start flashing.

•

End of programme

When the programme has finished three

flashing zeros are displayed, the pilot light

9 and the pilot light of button 8 go out and

the door can be opened.

7.2: Washing programme phase icons

•

Wash

•

Rinses

•

Drain

•

Spin

By selecting the wash programme, the

washing programme phase icons corre-

sponding to the various phases making up

the programme are shown in the bottom part

of the display. After having pressed button

8 only the icon of the running phase stays on.

7.3: Heating phase

During the washing cycle the display shows

a temperature icon indicating that the appli-

ance has started the heating phase of the

water in the tub.

7.4: Soil degree icons

•

Intensive

•

Normal

•

Daily

•

Light

•

Quick

•

Super Quick

•

Refresh

•

Super Refresh

When selecting a programme on the display

appears an icon indicating the degree of soil-

ing automatically proposed by the machine.

7.5: Child safety lock

(see «Child Safety

Lock» paragraph).

electrolux 7

First use

• Ensure that the electrical and water

connections comply with the installa-

tion instructions.

• Remove the polystyrene block and

any material from the drum.

• Pour 2 liters of water into the main

wash compartment

of the deter-

gent drawer in order to activate the

ECO valve. Then run a cotton cycle at

the highest temperature without any

laundry in the machine, to remove any

manufacturing residue from the drum

and tub. Pour 1/2 a measure of de-

tergent into the main wash compart-

ment and start the machine.

Personalisation

Acoustic signals

The machine is provided with an acoustic

device, which sounds in the following cases:

• at the end of the cycle

• if there is a fault.

By pressing the 4 and 5 buttons simultane-

ously for about 6 seconds , the acoustic

signal is deactivated (except if there is a fault).

By pressing these 2 buttons again, the

acoustic signal is reactivated.

Child safety lock

This device permits you to leave the appli-

ance unattended and not to worry that chil-

dren might be injured by or cause damage to

the appliance. This function remains enabled

also when the washing machine is not work-

ing.

There are two different ways to set this op-

tion:

1.

Before pressing button 8 : it will be im-

possible to start the machine.

2. After pressing button 8 : it will be impos-

sible to change any other programme or

option.

To enable or disable this option press simul-

taneously for about 6 seconds buttons 5 and

6 until on the display, the icon

appears or

disappears.

Daily use

Load the laundry

Open the door by carefully pulling the door

handle outwards. Place the laundry in the

drum, one item at a time, shaking them out

as much as possible. Close the door.

Measure out the detergent and the fab-

ric softener

Pull out the dispenser drawer until it stops.

Measure out the amount of detergent re-

quired, pour it into the main wash compart-

ment

or in the appropriate compartment

if the selected programme/option it requires

(see more details in «Detergent dispenser

drawer»).

8 electrolux

If required, pour fabric softener into the com-

partment marked

(the amount used must

not exceed the «MAX» mark in the drawer).

Close the drawer gently.

Select the required programme by

turning the programme selector dial (1)

Turn the programme selector dial to the re-

quired programme. The washing machine

will propose a temperature and automatically

select the maximum spin value provided for

the programme you have chosen. You can

change these values by operating the corre-

sponding buttons. The green pilot light of the

button 8 starts to flash.

The selector dial can be turned either clock-

wise or counterclockwise. Turn to position

to reset programme/Switching the ma-

chine off.

At the end of the programme the selec-

tor dial must be turned to position

, to

switch the machine off.

Caution! If you turn the programme

selector dial to another programme

when the machine is working, the red

pilot light of button 8 will blink 3 times

and the message Err is displayed to

indicate a wrong selection. The machine

will not perform the new selected

programme.

Programme Option buttons

Depending on the programme, different

functions can be combined. These must be

selected after choosing the desired pro-

gramme and before pressing the button 8 .

Select the temperature by pressing

button 2

By selecting a programme, the appliance

proposes automatically a default tempera-

ture.

Press this button repeatedly to increase or

decrease the temperature, if you want your

laundry to be washed at a different temper-

ature.

Reduce the spin speed by pressing

button 3

By selecting a programme, the appliance

proposes automatically the maximum spin

speed provided for that programme.

Press button 3 repeatedly to change the spin

speed, if you want your laundry to be spun at

a different speed. The relevant light illumi-

nates.

Select the available option by pressing

buttons 3, 4 and 5

Depending on the selected programme, dif-

ferent functions can be combined before

pressing the button 8 . By selecting an option

the relevant pilot light illuminates.

If an incorrect option is selected, the integra-

ted red pilot light of the button 8 flashes 3

times and the Err message appears on the

display for few seconds.

For compatibility among the washing

programmes and the options see chap-

ter «Washing Programmes».

Select the Delay Start by pressing

button 6

Before you start the programme, if you wish

to delay the start, press the button 6 repeat-

edly, to select the desired delay. The relevant

pilot light goes on.

The selected delay time value (up to 20

hours) will appear on the display a few sec-

onds, then the duration of the programme

will appear again.

You must select this option after you have set

the programme and before you press button

8 .

You can cancel or modify the delay time at

any moment, before you press button 8 .

Selecting the delayed start:

1. Select the programme and the required

options.

electrolux 9

2. Select the delay start by pressing the but-

ton 6 .

3. Press button 8 :

– the machine starts its hourly count-

down.

– The programme will start after the se-

lected delay has expired.

Cancelling the delayed start after having

pressed button 8 :

1. Set the washing machine to PAUSE by

pressing button 8 .

2.

Press button 6 once until the symbol 0’ is

displayed

3. Press button 8 again to start the pro-

gramme.

Important! The selected delay can be

changed only after selecting the washing

programme again.

The Delay Start can not be selected with

DRAIN programme.

Start the programme by pressing button

8

To start the selected programme, press the

button 8 , the green pilot light of the button

8 stops blinking.

To interrupt a programme which is running,

press the button 8 : the green pilot light starts

blinking.

To restart the programme from the point at

which it was interrupted, press the button 8

again . If you have chosen a delayed start,

the machine will begin the countdown. If an

incorrect option is selected, the red pilot light

of the button 8 blinks for 3 times the message

Err is displayed for a few seconds.

Select the Time Manager option by

pressing buttons 10

By pressing these buttons repeatedly, the

duration of the washing cycle can be in-

creased or decreased. The soil level icon will

appear on the display to indicate the chosen

degree of soil. This option is available only

with Cotton , Synthetic and Delicate pro-

grammes.

Soil Level Icon Type of fabric

Intensive For heavy soiled

items

Normal For normal soiled

items

Daily For daily soiled items

Soil Level Icon Type of fabric

Light For slightly soiled

items

Quick For very slightly

soiled items

Super Quick

1)

For items used or

worn for a short time

Refresh

1)

2)

For refreshing items

only

Super Re-

fresh

1)

2)

For refreshing a very

few items only

1) We recommend you to reduce the load sizes (see

Washing programmes table).

2) When you select this option the relevant icon appears

just for a while and then it disappears immediately.

Altering an option or a running

programme

It is possible to change some options before

the programme carries them out .

Before you make any change, you must

PAUSE the appliance by pressing the button

8 (if you wish to change the Time Manager

option, you must cancel the running pro-

gramme and make your selection again).

Changing a running programme is possible

only by resetting it. Turn the programme se-

lector dial to

and then to the new pro-

gramme position. Start the new programme

by pressing the button 8 again. The washing

water in the tub will be not emptied out.

Interrupting a programme

Press the button 8 to interrupt a programme

which is running, the corresponding green

pilot light starts blinking.

Press the button again to restart the pro-

gramme.

Cancelling a programme

Turn the selector dial to

to cancel a pro-

gramme which is running.

You can select now a new programme.

Opening the door

After the programme has started (or during

the delay time) the door is locked, if you need

to open it, set first the machine to PAUSE by

pressing the button 8 .

After a few minutes the pilot light 9 goes out

and it is possible to open the door.

If this pilot light remains lit, this means that

the machine is already heating or that the

10 electrolux

water level is too high. In any case, do not try

to force the door!

If you cannot open the door but you need to

open it you have to switch the machine off by

turning the selector dial to O . After a few mi-

nutes the door can be opened (pay atten-

tion to the water level and tempera-

ture!) .

After closing the door, it is necessary to se-

lect the programme and options again and to

press button 8 .

At the end of the programme

The machine stops automatically. Three

blinking 0.00 appear on the display and the

pilot light of button 8 goes off. Some acoustic

signals sound.

If a programme or an option that ends with

water left in the tub has been selected, the

door remains locked to indicate that the wa-

ter must be emptied out before opening the

door.

Follow the below instructions to empty out

the water:

1. Turn the programme selector dial to O .

2. Select the draining or spinning pro-

gramme.

3. Reduce the spin speed if needed, by

pressing the relevant button.

4. Press button 8 .

At the end of the programme, the door is re-

leased and can be opened. Turn the pro-

gramme selector dial to O to switch the ma-

chine off.

Remove the laundry from the drum and care-

fully check that the drum is empty. If you do

not intend to carry out another wash, close

the water tap. Leave the door open to pre-

vent the formation of mildew and unpleasant

smells.

Stand by : once the programme has finished

after a few minutes the energy saving system

will be enabled. The brightness of the display

is reduced. By pressing any button the ap-

pliance will come out of the energy saving

status.

Helpful hints and tips

Sorting out the laundry

Follow the wash code symbols on each gar-

ment label and the manufacturer’s washing

instructions. Sort the laundry as follows:

whites, coloureds, synthetics, delicates,

woollens.

Before loading the laundry

Never wash whites and coloureds together.

Whites may lose their «whiteness» in the

wash.

New coloured items may run in the first wash;

they should therefore be washed separately

the first time.

Button up pillowcases, close zip fasteners,

hooks and poppers. Tie any belts or long

tapes.

Remove persistent stains before washing.

Rub particularly soiled areas with a special

detergent or detergent paste.

Treat curtains with special care. Remove

hooks or tie them up in a bag or net.

Removing stains

Stubborn stains may not be removed by just

water and detergent. It is therefore advisable

to treat them prior to washing.

Blood: treat fresh stains with cold water. For

dried stains, soak overnight in water with a

special detergent then rub in the soap and

water.

Oil based paint: moisten with benzine stain

remover, lay the garment on a soft cloth and

dab the stain; treat several times.

Dried grease stains: moisten with turpen-

tine, lay the garment on a soft surface and

dab the stain with the fingertips and a cotton

cloth.

Rust: oxalic acid dissolved in hot water or a

rust removing product used cold. Be careful

with rust stains which are not recent since the

cellulose structure will already have been

damaged and the fabric tends to hole.

Mould stains: treat with bleach, rinse well

(whites and fast coloureds only).

Grass: soap lightly and treat with bleach

(whites and fast coloureds only).

electrolux 11

Ball point pen and glue: moisten with ace-

tone

1)

, lay the garment on a soft cloth and

dab the stain.

Lipstick: moisten with acetone as above,

then treat stains with methylated spirits.

Treat any residual marks with bleach.

Red wine: soak in water and detergent,

rinse and treat with acetic or citric acid, then

rinse. Treat any residual marks with bleach.

Ink: depending on the type of ink, moisten

the fabric first with acetone

1)

, then with ace-

tic acid; treat any residual marks on white

fabrics with bleach and then rinse thorough-

ly.

Tar stains: first treat with stain remover, me-

thylated spirits or benzine, then rub with de-

tergent paste.

Detergents and additives

Good washing results also depend on the

choice of detergent and use of the correct

quantities to avoid waste and protect the en-

vironment.

Although biodegradable, detergents contain

substances which, in large quantities, can

upset the delicate balance of nature.

The choice of detergent will depend on the

type of fabric (delicates, woollens, cottons,

etc.), the colour, washing temperature and

degree of soiling.

All commonly available washing machine de-

tergents may be used in this appliance:

• powder detergents for all types of fabric

• powder detergents for delicate fabrics

(60°C max) and woollens

• liquid detergents, preferably for low tem-

perature wash programmes (60°C max)

for all types of fabric, or special for wool-

lens only.

The detergent and any additives must be

placed in the appropriate compartments of

the dispenser drawer before starting the

wash programme.

If using liquid detergents, a programme

without prewash must be selected.

Your appliance incorporates a recirculation

system which allows an optimal use of the

concentrated detergent.

Follow the product manufacturer’s recom-

mendations on quantities to use and do not

exceed the «MAX» mark in the detergent

dispenser drawer .

Quantity of detergent to be used

The type and quantity of detergent will de-

pend on the type of fabric, load size, degree

of soiling and hardness of the water used.

Follow the product manufacturers’ instruc-

tions on quantities to use.

Use less detergent if:

• you are washing a small load

• the laundry is lightly soiled

• large amounts of foam form during wash-

ing.

Degrees of water hardness

Water hardness is classified in so-called “de-

grees” of hardness. Information on hardness

of the water in your area can be obtained

from the relevant water supply company, or

from your local authority. If the water hard-

ness degree is medium or high we suggest

you to add a water softener following always

the manufacturer’s instructions. When the

degree of hardness is soft, readjust the quan-

tity of the detergent.

1) do not use acetone on artificial silk

12 electrolux

Washing programmes

Programme

Maximum and Minimum Temperature

Cycle Description

Maximum Spin Speed

Maximum Fabrics Load

Type of Laundry

Options

Detergent

Compartment

COTTONS

95°- Cold

Main wash - Rinses

Maximum spin speed 1000/1200/1400 rpm

1)

Max. load 6 kg - Reduced load 3 kg

For white and coloured cotton (normally soiled

items).

SPIN REDUCTION,

RINSE HOLD , NIGHT

CYCLE , PREWASH ,

EXTRA RINSE , TIME

MANAGER

2)

3)

SYNTHETICS

60°- Cold

Main wash - Rinses

Maximum spin speed 900 rpm

Max. load 3 kg - Reduced load 1,5 kg

Synthetic or mixed fabrics: underwear, coloured gar-

ments, non-shrink shirts, blouses.

SPIN REDUCTION,

RINSE HOLD , NIGHT

CYCLE , PREWASH,

EXTRA RINSE , TIME

MANAGER

2)

3)

DELICATES

40°- Cold

Main wash - Rinses

Maximum spin speed 700 rpm

Max. load 3 kg - Reduced load 1,5 kg

Delicate fabrics: acrylics, viscose, polyester.

RINSE HOLD , NIGHT

CYCLE , PREWASH,

EXTRA RINSE , TIME

MANAGER

2)

3)

WOOL

40°- Cold

Main wash - Rinses

Maximum spin speed 900/1000 rpm

1)

Max. load 2 kg

Washing programme for machine washable wool as

well as for hand washable woollens and delicate fabrics

with «hand washing» care symbol. Note : A single or

bulky item may cause imbalance. If the appliance

doesn’t perform the final spin phase, add more items,

redistribute the load manually and then select the spin-

ning programme.

SPIN REDUCTION,

RINSE HOLD , NIGHT

CYCLE

SILK

30°- Cold

Main wash - Rinses

Maximum spin speed 700 rpm

Max. load 1 kg

Delicate washing programme suitable for silk and mixed

synthetic items.

RINSE HOLD , NIGHT

CYCLE

electrolux 13

Programme

Maximum and Minimum Temperature

Cycle Description

Maximum Spin Speed

Maximum Fabrics Load

Type of Laundry

Options

Detergent

Compartment

LINGERIE

40°- Cold

Main wash - Rinses

Maximum spin speed 900/1000 rpm

1)

Max. load 1 kg

This programme is suitable for very delicate items such

a lingerie, bras and underwear.

SPIN REDUCTION,

RINSE HOLD , NIGHT

CYCLE

RINSE

Rinse - Long spin

Maximum spin speed 1000/1200/1400 rpm

1)

Max. load 6 kg

With this programme it is possible to rinse and spin cot-

ton garments which have been washed by hand. To in-

tensify the rinsing action, select the option EXTRA

RINSE. The appliance will add some additional rinses.

SPIN REDUCTION,

RINSE HOLD , NIGHT

CYCLE , EXTRA

RINSE

DRAIN

Draining of water

Max. load 6 kg

For emptying out the water of the last rinse in pro-

grammes with the Rinse Hold and Night Cycle option

selected.

SPIN

Drain and long spin

Maximum spin speed 1000/1200/1400 rpm

1)

Max. load 6 kg

Separate spin for hand washed garments and after pro-

grammes with the Rinse Hold and Night Cycle option

selected. You can choose the spin speed by pressing

the relevant button to adapt it to the fabrics to be spun.

SPIN REDUCTION

+ COTTONS ECONOMY

95° -40°

Main wash - Rinses

Maximum spin speed 1000/1200/1400 rpm

1)

Max. load 6 kg

White and fast coloured cotton

This programme can be selected for slightly or normally

soiled cotton items. The temperature will decrease and

the washing time will be extended. This allows to obtain

a good washing efficiency so saving energy.

SPIN REDUCTION,

RINSE HOLD, NIGHT

CYCLE , PREWASH,

EXTRA RINSE

3)

EASY IRON

60°- Cold

Main wash - Rinses

Maximum spin speed 900 rpm

Max. load 1 kg

Selecting this programme the laundry is gently washed

and spun to avoid any creasing. In this way ironing is

easier. Furthermore the machine will perform additional

rinses.

SPIN REDUCTION,

RINSE HOLD, PRE-

WASH, EXTRA RINSE

3)

14 electrolux

Programme

Maximum and Minimum Temperature

Cycle Description

Maximum Spin Speed

Maximum Fabrics Load

Type of Laundry

Options

Detergent

Compartment

JEANS

60°- Cold

Main wash - Rinses

Maximum spin speed 900/1000/1200 rpm

Max. load 3 kg

With this programme it is possible to wash items like

pants, shirts or jackets in denim and also jersey realized

with hi-tech materials (the Extra Rinse option will be ac-

tivated automatically).

SPIN REDUCTION,

RINSE HOLD , NIGHT

CYCLE, PREWASH

3)

SPORT INTENSIVE

40°- Cold

Prewash - Main wash - Rinses

Maximum spin speed 900 rpm

Max. load 2,5 kg

This programme is suitable for washing heavily soiled

sport items. The machine will add automatically a pre-

wash phase without detergent before the main wash to

eliminate mud stains.

SPIN REDUCTION,

RINSE HOLD , NIGHT

CYCLE , EXTRA

RINSE

SPORT LIGHT

30°

Main wash - Rinses

Maximum spin speed 700 rpm

Max. load 2,5 kg

Short programme for lightly soiled mixed fabric sports

clothes.

/OFF

For cancelling the programme which is running or to

switch the machine off .

1) depending on a model

2) If you select the Quick or Super Quick option by pressing button 10 , we recommend that you reduce the maximum

load as indicated. Full loading is possible however with somewhat reduced cleaning results. If you select the Refresh

or Super Refresh option, we recommend that you reduce the load even more.

3) If using liquid detergents, a programme without PREWASH must be selected.

Care and cleaning

Warning! You must disconnect the

appliance from the electricity supply,

before you can carry out any cleaning or

maintenance work.

Descaling

The water we use normally contains lime. It

is a good idea to periodically use a water

softening powder in the machine. Do this

separately from any laundry washing, and

according to the softening powder manufac-

turer's instructions. This will help to prevent

the formation of lime deposits.

After each wash

Leave the door open for a while. This helps

to prevent mould and stagnant smells form-

ing inside the appliance. Keeping the door

open after a wash will also help to preserve

the door seal.

Maintenance wash

With the use of low temperature washes it is

possible to get a build up of residues inside

the drum.

We recommend that a maintenance wash be

performed on a regular basis.

electrolux 15

To run a maintenance wash:

• The drum should be empty of laundry.

• Select the hottest cotton wash pro-

gramme.

• Use a normal measure of detergent, must

be a powder with biological properties.

External cleaning

Clean the exterior cabinet of the appliance

with soap and water only, and then dry thor-

oughly.

Important! Do not use methylated spirits,

solvents or similar products to clean the

cabinet.

Cleaning the dispenser drawer

The detergent dispenser drawer should be

cleaned regularly.

The washing powder and additive dispenser

drawer should be cleaned regularly.

Remove the drawer by pressing the catch

downwards and by pulling it out.

Flush it out under a tap, to remove any traces

of accumulated powder.

To aid cleaning, the top part of the additive

compartment should be removed. Clean all

parts with water.

Clean the chamber of dispenser drawer with

a brush.

Washing drum

Rust deposits in the drum may occur due to

rusting foreign bodies in the washing or tap

water containing iron.

Important! Do not clean the drum with

acidic descaling agents, scouring agents

containing chlorine or iron or steel wool.

1. Remove any rust deposits on the drum

with a cleaning agent for stainless steel.

2. Run a washing cycle without any washing

to clean off any cleaning agent residues.

Programme: Short Cotton Programme at

maximum temperature and add approx.

1/4 measuring cup of detergent.

16 electrolux

Door seal

Check from time to time the door seal and

eliminate eventual possible objects that

could be trapped in the fold.

Drain pump

The pump should be inspected regularly and

particularly if:

• the appliance does not empty and/or spin;

• the appliance makes an unusual noise dur-

ing draining due to objects such as safety

pins, coins etc. blocking the pump.

• a problem with water draining is detected

(see chapter “What to do if...” for more de-

tails).

Warning! Before opening the pump

door, switch the appliance off and

remove the mains plug from the socket.

Proceed as follows:

1. Unplug the appliance.

2. If it is necessary, wait until the water has

cooled down.

3. Open the pump door.

4. Place a container close to the pump to

collect any spillage.

5. Pull out the emergency emptying hose,

place it in the container and remove its

cap.

6. When no more water comes out, un-

screw the pump cover by turning it anti-

clockwise and remove the filter. Use pli-

ers, if necessary. Always keep a rag

nearby to dry up any water spillages

when removing the cover.

Clean the filter under a tap, to remove

any traces of fluff.

7. Remove foreign bodies and fluff from the

filter seat and from the pump impeller.

electrolux 17

8. Check carefully whether the pump im-

peller rotates (it rotates jerkily). If it

doesn’t rotate, please contact your

Service Centre.

9. Put the cap back on the emergency

emptying hose and place the latter back

in its seat.

10. Replace the filter into the pump by in-

serting it correctly into the special

guides. Screw the pump cover firmly by

turning it clockwise.

11. Close the pump door.

Warning!

When the appliance is in use and depending

on the programme selected there can be hot

water in the pump.

Never remove the pump cover during a wash

cycle, always wait until the appliance has fin-

ished the cycle, and is empty. When refitting

the pump cover, ensure it is securely re-tight-

ened so as to stop leaks and young children

being able to remove it.

Cleaning the water inlet filters

If you notice that the machine is taking longer

to fill, check that the filter in the water inlet

hose is not blocked.

1. Turn off the water tap.

2. Unscrew the water inlet hose.

3. Clean the filter in the hose using a hard

bristle brush.

18 electrolux

4. Screw the hose back onto the tap.

5. Unscrew the hose from the machine.

Keep a rug nearby because some water

may flow.

6. Clean the filter in the valve with a stiff

brush or with the piece of cloth.

7. Screw the hose back to the machine and

make sure the connection is tight.

8. Turn on the water tap.

Emergency emptying out

If the water is not discharged, proceed as

follows to empty out the machine:

1. pull out the plug from the power socket;

2. close the water tap;

3. if necessary, wait until the water has

cooled down;

4. open the pump door;

5. place a bowl on the floor and place the

end of the emergency emptying hose into

the bowl. Remove its cap. The water

should drain by gravity into the bowl.

When the bowl is full, put the cap back

on the hose. Empty the bowl. Repeat the

procedure until water stops flowing out;

6. clean the pump if necessary as previously

described;

7. replace the emergency emptying hose in

its seat after having plugged it;

8. screw the pump again and close the

door.

Frost precautions

If the machine is installed in a place where the

temperature could drop below 0°C, proceed

as follows:

1. close the water tap and unscrew the wa-

ter inlet hose from the tap;

2. place the end of the emergency emptying

hose and that of the inlet hose in a bowl

placed on the floor and let water drain

out;

3. screw the water inlet hose back on and

reposition the emergency emptying hose

after having put the cap on again.

By doing this, any water remaining in the ma-

chine is removed, avoiding ice forming and

consequently damage to the appliance.

When you use the machine again, make sure

that the ambient temperature is above 0°C.

Important! Every time you drain the water

through the emergency emptying hose you

must pour 2 litres of water into the main wash

compartment of the detergent drawer and

then run the drain programme. This will

activate the ECO Valve device avoiding that

part of the detergent remains unused at next

washing.

What to do if...

Certain problems are due to lack of simple

maintenance or oversights, which can be

solved easily without calling out an engineer.

Before contacting your local Service Centre,

please carry out the checks listed below.

During machine operation it is possible that

the red pilot light of button 8 blinks, one of

the following alarm codes appears on the

display and some acoustic signals sound ev-

electrolux 19

ery 20 seconds to indicate that the machine

is not working:

•

: problem with the water supply.

•

: problem with the water draining.

•

: door open.

Once the problem has been eliminated,

press the button 8 to restart the programme.

If after all checks, the problem persists, con-

tact your local Service Centre.

Problem Possible cause/Solution

The washing machine does not start:

The door has not been closed.

• Close firmly the door.

The plug is not properly inserted in the power

socket.

• Insert the plug into the power socket.

There is no power at the socket.

• Please check your domestic electrical installa-

tion.

The main fuse has blown.

• Replace the fuse.

The selector dial is not correctly positioned and

the button 8 has not been pressed.

• Please turn the selector dial and press the but-

ton 8 again.

The delay start has been selected.

• If the laundry is to be washed immediately,

cancel the delay start.

The CHILD SAFETY LOCK has been activated.

• Deactivate this device.

The machine does not fill:

The water tap is closed.

• Open the water tap.

The inlet hose is squashed or kinked.

• Check the inlet hose connection.

The filter in the inlet hose or the inlet valve filter are

blocked.

• Clean the water inlet filters (See "Cleaning the

water inlet filters" for more details).

The door is not properly closed.

• Close firmly the door.

The machine fills then empties immediately:

The end of the drain hose is too low.

• Refer to relevant paragraph in «Water drain-

age» section.

The machine does not empty and/or does not

spin:

The drain hose is squashed or kinked.

• Check the drain hose connection.

The drain filter is clogged.

• Clean the drain filter.

An option or a programme that ends with the wa-

ter still in the tub or a that eliminates all the spin-

ning phases has been selected.

• Disable the option.

• Select the draining or the spinning programme.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

20 electrolux

Страница загружается ...

Electrolux EWF146410W Руководство пользователя

Electrolux EWF146410W Руководство пользователя

Похожие модели бренда

Модели других брендов