SoundMax SM-CMMD7000(чер) Руководство пользователя

1

SM-CMMD7000

MULTIMEDIA DVD RECEIVER WITH MOTORIZED 7” TFT DISPLAY

Instruction manual

 DVD- 7”  TFT-



2

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before

connecting, operating and/or adjusting the product and keep the manual for reference in the future.

Table of contents

Table of contents......................................................................................................................................2

Important safeguards ...............................................................................................................................3

Accessories .............................................................................................................................................4

Installation/connection..............................................................................................................................5

Electrical connection.................................................................................................................................7

Unit controls............................................................................................................................................9

General operations................................................................................................................................. 12

Main menu............................................................................................................................................ 14

Radio setup........................................................................................................................................... 18

Disc operations...................................................................................................................................... 22

DVD Setup menu ................................................................................................................................... 26

VCD/CD operations....................................................................................................................... 29

MP4 Disc operations ..................................................................................................................... 32

MP3 Disc operations ..................................................................................................................... 34

TV tuner operations................................................................................................................................ 36

Handling and cleaning discs ..................................................................................................................... 38

Troubleshooting guide............................................................................................................................. 39

Specification.......................................................................................................................................... 40

3

Important safeguards

 Using the device at temperature below -10º may cause the breakage of the device. BEFORE USING PLEASE HEAT

UP THE PASSENGER COMPARTMENT TO THE RECOMMENDED TEMPERATURE!

 Read carefully through this manual to familiarize yourself with this high-quality sound system.

 Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.

 When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage

rating may cause serious damage to the unit.

 DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.

 Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create

safety hazards such as electrical shock or laser beam exposure.

 If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes

normal before operating the unit.

 DO NOT open covers and do not repair yourself. Consult the dealer or an experienced technician for help.

 Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or during

a thunderstorm.

 Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual

sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified technician check

the system.

 The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please confirm it

before installation.

 Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or

burn out the power amplifier.

4

Accessories

5

Installation/connection

This unit can be installed in any dashboard having an opening as shown on the picture. The

dashboard should be ~ 4.5 – 5.5 mm thick in order to be able to support the unit.

6

Installation using the screw holes at the sides of

the unit.

Select a position where the screw holes of the mounting

bracket supplied with the car and the screw holes of the

main unit become aligned (are fitted), and tighten the

screws (see (4) at 2 places on each side). And then

fasten them to the car.

Note: Outer Trim Frame (5) and Mounting Sleeve (1)

are not used for installation method.

7

Electrical connection

Note: For your driving safety, please link

your Braking signal wire with low power

level, and keep it controlled by manual

brake switch. Wire should be high power

level and the unit cannot play video disc.

8

Caution: For some car models you may need to modify wiring of the supplied power cord. Contact your authorized car

dealer before installing this unit.

Using the ISO Connector

1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated.

2. For connections without the ISO connectors, check the wiring in the vehicle carefully before

connecting, incorrect connection may cause serious damage to this unit.

3. Cut the connector, connect the colored leads of the power cord to the car battery as shown in

the color code table below for speaker and power cable connections.

Location

Connector A Location Connector B

1 Illuminating/Pink 9 Reversing Signal/Orange

2 Power/Blue 10 Braking Signal/Brown

3 Ignition Key/Red 11

4 Rear R Speaker/Violet 12 Rear R Speaker/Violet/Black

5 Front R Speaker/Grey 13 Front R Speaker/Grey/Black

6 Front L Speaker/White 14 Front L Speaker/White/Black

7 Rear L Speaker/Green 15 Rear L Speaker/Green/Black

8 12V(+)/Yellow 16 Negative Ground/Black

9

Unit controls

Monitor

1. BACKSPACE button

2. ANGLE+/- buttons

3. MENU button

Brief press to set DVD menu during playback mode, brief press it

to set the radio menu during radio mode. Hold and press to set

the main menu.

Front panel

4. Vol+/ Vol -/Sel button

5. SRC button

Brief press to select radio mode or playback mode,

hold and press it to turn the unit on or off.

6. MUTE button

7. BAND button

8. AF/EQ Button

9. TA/LOUD

(Traffic alarm/Loudness control)

10. EJECT button

11. Infrared sensor

12. RESET button

13. Cursor/Enter buttons

14. DISP button

15. OPEN button

16. LCD screen

17. Disc loading slot

10

Remote control

1. AF/EQ button

2. SOURCE button

3. GOTO button

4. BND/TITLE button

5. AMS/MENU button

6. LOC/SUB-T button

7. ST/AUDIO button

8. OSD button

9. PTY/ANGLE button

10.

SLOW button

11. ZOOM button

12. PROG button

13. P/N button

14. VOL +/ VOL- buttons

15. MUTE button

16. TA/ LOUD button

17. EJECT button

18. 0~9 NUMBER buttons

19. CLEAR button

20. ENTER button / CURSOR /// buttons / / FAST REWIND/ FAST FORWARD

BUTTONS / /  PREVIOUS/ NEXT TRACK BUTTONS

21. SETUP button

22.  PAUSE button

23.  STOP button

24. RPT button

25. RDM button

26. SEL button

11

Changing the battery

1. Press the catch and at the same time pull out the battery tray (pic. 1).

2. Insert the 1 x lithium battery, type CR2025 (3V) battery with the stamped (+) mark

facing upward. Insert the battery tray into the remote control (pic.2).

Warning:

 Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a doctor

immediately.

 Do not recharge, short, disassemble or heat the battery or dispose it in a fire.

 Do not expose or bring into contact the battery with other metallic materials. Doing this may cause the battery to

give off heat, crack or start a fire.

 When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may give off heat,

crack or start a fire.

Pic. 1 Pic. 2

12

General operations

Reset the Unit

Operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the front panel

at first, and then press RESET button on the panel with a pointed object, (such as a ballpoint pen) to set the unit to initial

state.

Note: When some errors occur on the display, you can also press RESET button to resume to normal, and it will erase

the clock setting and some memorized functions. This function can only be operated by the head unit.

Turning the Unit On/Off

Press PWR button to turn on the unit, press it again, the unit is still in the waiting status. After inserting a disc, the unit

will automatically start playing. Keep pressing it more than 0.5 seconds to turn off the unit completely.

Note: Pressing SRC button on the head unit also performs the same operation. During playback mode, it will play

automatically after inserting a disc.

Setting the Sound Characteristics

Repeatedly press SEL button on the RC or VOL knob on the front panel to select the desired mode in the following order:

BALAN => FAD => BASS => TREBLE => VOLUME =>. After selecting the desired mode, you can adjust the current

level by pressing VOL buttons on the RC or rotating the VOL knob on the unit.

EQ Setting

While listening to the popular music, classic music or rock music, you can select the corresponding preset modes to

adjust the sound quality perfectly by using EQ button. Repeatedly keep pressing EQ button to choose the following

modes in turn: POP => CLASS => ROCK => OFF

Note: The default setting is OFF.

Volume Control

Press VOL+/VOL- button on the RC or rotate the VOL knob on the front panel to increase/decrease the sound level.

13

Turning Loudness On/Off

Keep pressing LOUD button on the RC or on the front panel to activate loud function. You can press this button to

increase the low frequency, which can improve sensitivity for your ears. Keep pressing it again to quit this function.

Eject a Disc

Press EJECT button on the RC or on the front panel to eject or insert a disc.

Open the Monitor

Press OPEN button on the front panel to slant the monitor, press and hold it again, the monitor will return to initial state.

Angle Setting

Press ANGLE buttons to adjust the best position of the monitor.

Mute Function

Press MUTE button on the RC or on the front panel to turn off the sound. Press it again to resume the previous volume

level.

Clear

After inputting something wrong, press CLEAR button to clear it.

Mode Selector

Repeatedly press SOURCE button to select radio mode TV mode or playback mode.

Menu Setup Button

During DVD MENU SETUP/RADIO MENU SETUP/TV MENU SETUP mode, press ENTER button on the remote control to

select the option, then press ENTER again to enter.

Infrared Sensor:

Reception of the remote control signal.

Eject a Disc Compulsively

During playback, if it cannot be played normally or the disc cannot be ejected, briefly press SOURCE button to switch to

the radio mode, hold and press the EJECT button for 3 seconds, the disc will be ejected compulsively.

14

Main menu

Note: This unit can be operated by touching the screen buttons. Thus you can

select the menus and change the parameters.

When the unit is on, the monitor will display main menu.

Press and hold SETUP button on the remote control or MENU on the head unit,

or press MENU on the monitor to enter the menu.

This menu includes AUDIO, VIDEO, SOURCE, SYSTEM, EXIT. Press them on

the monitor to set the desired status.

15

Audio Adjust

You can adjust VOLUME, BALANCE, FAD, BASS, TREBLE.

For example, press FAD, the setting menu will appear.

Press and buttons to adjust the desired FAD level, press EXIT to exit this

menu.

Note: Adjusting the other options perform the same operation.

Video Adjust

In this menu you can adjust CONTRAST, COLOR, TINT, BRIGHT, PICTURE.

16

Source Adjust

You can adjust RADIO, DVD, AUX and TV to ON or OFF, press the

corresponding button to set. If one of them was set OFF, that function is not

available. For example, set the RADIO OFF, pressing SOURCE can not activate

reception of radio.

System Adjust

In this menu you can adjust CLOCK SYS, KEY BEEP, MONI FLEX (monitor flex),

REVER POLA (reverse polarity), SUBWOOFER, AMS FULLUP, LOCAL AREA,

LOCAL, GOTO FREQ, ADJ SCREEN, CLOCK ADJ.

Clock System

Press CLOCK SYSTEM in the monitor to set 12 HOUR or 24 HOUR in this menu.

Key Beep

In this menu you can adjust KEY BEEP, press it and select ON or OFF, the default setting is ON, it means when you press

the keys, they are sounded.

Monitor Flex

In this menu you can adjust MONITOR FLEX, press it on the monitor and select MANUAL or AUTO, the default setting is

AUTO, it means that when you turn the unit on the monitor will take a default position.

Note: Press arrow buttons at the right side of the screen to display the next or previous menu.

Rever Pola (Reverse Polarity)

You can reverse the polarity in this menu. The signal is +12V when you back a car, please press BATTERY in the

monitor; if the signal is 0 V, please press GROUND.

17

Subwoofer

In this menu you can adjust SUBWOOFER settings, press it and select ON or OFF, the default setting is ON.

AMS Fullup

In this menu you can set the modes of AMS. When the setup is ON, the presettable stations are full, New one’s are not

allowed. When you select OFF, it will search continually.

Local Area

You can select EUROPE, OIRT, FM ONLY to search the stations quickly in your current area, also, you can select FM ONLY

to receive the FM stations only.

Local

In this menu you can search the LOCAL stations, when selected ON, the strong signal local stations can be received,

when selected OFF, the week signal out-of-town stations may be received.

Goto Freq

Selecting ON, you can use GOTO button on the remote control to select a station’s frequency directly in radio mode.

Adj Screen

Press ADJ SCREEN to display the above menu, there are a square button at the top left corner and a tip: please press

the button. Press the square button at place 1 , then the button will move to place 2, press it at place 2, it will move to

place 3, then place 4, press SAVE at last.

Clock Adjust

Press CLOCK ADJ to adjust the time.

18

Radio setup

1. Band Indicator

Shows which band the radio is tuned to.

2. Preset Number Indicator

Shows what preset has been selected.

3. Frequency Indicator

Shows which radio frequency is tuned.

4. SEEK+/SEEK-

Briefly press to tune by the presettable range, hold and press to tune

automatically.

5. VOL+/VOL-

Press to increase or decrease the volume.

6. BAND

Press to select the bands.

7. AMS

Briefly press to scan the current station, hold and press to tune automatically.

8. MENU

Press this button to enter the main menu.

9. SRC

Press this button to select the signal source.

10.The 6 stations of the current band.

Briefly press the button to select station, hold and press to save the current station to one of the 6 stations.

11.RDS

Press it to enter RDS SETUP.

Band Selector

During radio mode, repeatedly press BAND button to select the bands in the following order:

19

Manual/Automatic Tuning

 Manual Tuning: Press / buttons on the remote control, / buttons of the front panel or SEEK-/+ on the

monitor continuously to select a station downward or upward respectively.

 Automatic Tuning: Press and hold / buttons on the remote control, / buttons of the front panel or SEEK-/+

on the monitor for more than 3 seconds, the radio automatically searches a station downward or upward

respectively and plays when it finds a station.

DX/LOC Selector

During radio mode, press LOC/SUB-T button on the RC to select strong or weak station reception. LOC ON appears on

the display and only local stations are available. When you turn it off both distance and local stations can be received.

Note: The function is invalid in AM tuning.

Selecting the Stored Station

During radio mode, press / buttons on the RC or on the front panel to select the stored station upward/downward.

MO/ST Selector

During radio mode, you can press ST/AUDIO button on the remote control to select mono mode or stereo mode.

Stereo reception is on when ST ON appears.

It is switched to mono mode when ST OFF appears.

Note: The function is available only in FM tuning.

Scanning/Memorizing Stations Automatically

During radio mode, you can press AMS/MENU button on the RC or AMS button on the monitor to scan each stored

station for 5 seconds respectively which stored with Number Buttons (from 1 to 6).

You can press the corresponding Number Buttons, AMS/MENU button on the RC or AMS button on the monitor when

your desired station is on. And it starts playing that station.

When you press and hold AMS/MENU button on the RC or AMS button on the monitor for more than 2 seconds, it will

activate automatically memory-storing function. The tuner automatically selects a station and stores it by any one of

the Number Buttons (from 1 to 6).

To store the station press and hold number button for more than 2 seconds when listening.

20

Note: The unit can be stored up to 6 stations for each band.

On Screen Display

During radio mode, keep pressing OSD button on the remote control or DISP button on the front panel to display the

current mode.

RDS Setup

1. AF

Press it to activate AF function.

2. 

Press it to activate TA function.

3. /

Press it to select PTY code.

4. PTY

Press it to activate PTY function.

5. During PTY ON, press this button to search the playing track type.

6. Displays the RADIO TEXT of the RDS station.

7. PS:

Display the current RDS station programs information.

8. SEEK+/SEEK-

Press it to tune automatically.

9. PREV

Press it to turn to “listening to the radio”.

10.EQ

Press it to select the corresponding preset modes to adjust the sound quality.

11.LOUD

Press it to activate the LOUD function.

Страница загружается...

SoundMax SM-CMMD7000(чер) Руководство пользователя

Похожие модели бренда

Модели других брендов