Hyundai H-CDM8038 Руководство пользователя

Бренд: Hyundai

Модель: H-CDM8038

Категория: Мультимедиа-приемники для автомобилей

Тип: Руководство пользователя

H- CDM8038

CD/MP3/WMA – RECEIVER CD/MP3/WMA - 

Instruction manual 

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before

connecting, operating and/or adjusting the product and keep the manual for reference in the future.

Table of contents

Table of contents................................................................................................................................................................. 2

Important safeguards........................................................................................................................................................... 3

Accessories......................................................................................................................................................................... 4

Installation/Connections...................................................................................................................................................... 5

Panel controls..................................................................................................................................................................... 9

General operations.............................................................................................................................................................11

Digital tuner operations..................................................................................................................................................... 16

CD/SD/MMC operations .................................................................................................................................................. 18

MP3/WMA overview........................................................................................................................................................ 22

Bluetooth (hands-free) operations ..................................................................................................................................... 24

Anti-theft system .............................................................................................................................................................. 27

Handling discs.................................................................................................................................................................. 27

Cleaning ........................................................................................................................................................................... 28

Troubleshooting guide ...................................................................................................................................................... 29

Specification..................................................................................................................................................................... 30

Important safeguards

 Read carefully through this manual to familiarize yourself with this high-quality sound system.

 Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.

 When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage

rating may cause serious damage to the unit.

 Do not attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.

 Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create safety

hazards such as electrical shock or laser beam exposure.

 If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal

before operating the unit.

 Do not open covers and do not repair yourself. Consult the dealer or an experienced technician for help.

 Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or during a

thunderstorm.

 Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual

sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified technician check

the system.

 The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please confirm it

before installation.

 Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or burn

out the power amplifier.

 Do not install the detachable panel before connecting the wire.

 Do not use the unit in places where it can be exposed to water, moisture and dust.

Accessories

Mounting parts

Receiver 1 pc

Bluetooth headset 1 pc

Bluetooth headset pouch 1 pc

Bluetooth headset ear clip 1 pc

Front panel 1 pc

Front panel case 1 pc

Customer information 1 pc

Warranty card 1 pc

Instruction manual 1 pc

Installation/Connections

Use only the supplied mounting hardware for a safe and secure installation. Be sure to remove the front panel before

installing the unit.

Mounting angle adjustment

Adjust the mounting angle to less than 20°.

Installation in the dashboard

Note: Keep the release key in a safe place as you may need it in the future to remove the unit from the car.

1. Unit

2. Release case

3. Dash board

4. Hex nut

5. Lock washer

6. Plain washer

7. Car body

8. Rear support strap

9. Tapping screw

10. Hex bolt

Electrical connections

ISO connector

Location

Function

Connector A Connector B

1 Rear Right(+)---Violet

2 Rear Right(-)---Violet/Black stripe

3 Front Right(+)---Grey

4 Battery 12V (+)/yellow Front Right(-)---Grey/Black Stripe

5 Power Antenna/blue Front Left(+)---White

6 Front Left((-)---White/Black Stripe

7 ACC+/red Rear Left(+)---Green

8 Ground/black Rear Left(-)---Green/Black Stripe

Panel controls

Front panel

1. POWER button

2. SEL button

3. VOL knob

4. Preset stations (1,2,3,4,5,6)

5. AF button

6. TA button

7. PTY button

8. DISP button

9. MODE button

10. BD button

11. PREVIOUS/NEXT button

12. A/PS button

13. SCAN button

14. MUTE/DUAL ILLUMINATION button

15. LCD display

16. OPEN button

17. CD slot

18. EJECT button

19. PAUSE button

20. INT button

21. RPT button

22. RDM button

23. 24. + 10/ -10 TRACK SEARCH DOWN/UP button

25. Multi-media card (MMC)/SD card slot

26. Wireless bluetooth headset

27. RESET button

28. Status indicator light

Note: Pressing the RESET button will erase the clock setting and stored stations.

Panel status indicator lights up when you slide the panel down; flashes when you

remove the panel.

General operations

Reset the unit

Operating the unit for the first time or after replacing the car battery, you must reset the unit.

Press OPEN button on the panel to open the panel and press the RESET button with thin hard object to restore the unit to

the original factory settings.

Power ON/OFF

Press any button to turn the unit on. Press and hold POWER button to turn off the unit.

Note: After the unit is off, the volume level and radio current settings will be memorized, and when you turn the unit on it

will resume the stored status, which you set.

Display (DISP)

Press DISP button to switch between display information such as radio frequencies, clock, track and other information

depending on the playing MODE.

To adjust the time:

 Press DISP button until clock is showed press the DISP button and hold for 2 seconds. Time will start blinking.

 Rotate the VOL knob clockwise to adjust minute.

 Rotate the VOL knob anticlockwise to adjust hour.

 Press DISP button again to save setting.

Mode

By pressing this button, user can select: AUX/TUNER/S-CDP(CD/MP3)/ MMC/SD mode.

Mute

Press this button to mute the sound at once. Press again to return to the previous volume level.

Dual illumination

When press the MUTE button for more than 2 seconds, it is activated as selecting Blue or Red buttons illumination.

Volume control/SELECT

Rotating this knob, you can adjust VOL/BASS/TREB/BAL/FAD. To select the functions, press SEL button shortly until

the desired functions are shown on the display.

Increase or decrease the volume by turn the VOL knob right or left. These buttons can be used to adjust the BASS,

TREBLE, BALANCE and FADER.

Other functions

To choose the corresponding mode, press SEL button for 2 seconds, and then press it repeatedly until the display shows the

mode. Rotate the knob to choose the needed value. After choosing, please leave the unit idle to activate.

TA SEEK/TA ALARM

In TA SEEK mode, the unit will seek for traffic announcement program when TA is pressed; in TA ALARM mode the

alarm is set off.

MASK DPI/MASK ALL

During MASK DPI mode, the unit will mask only the AF which has different PI, this is the default mode; during MASK

ALL mode, the unit will mask the AF which has different PI and no RDS signal with high field strength.

RETUNE S/L - SHORT/LONG

“RETUNE” refers to the time period the unit allows for radio scan when reception is interrupted. “S” represents a time

period of 30 seconds and “L” represents a time period of 90 seconds.

AUDIO DSP CONTROLS

Choose equalizer mode: POP M => ROCK M => CLASS M=> FLAT M =>DSP OFF.

LOUDNESS CONTROLS

Select LOUD ON or OFF. In ON mode the bass and treble response will be boosted.

SUBWOOFER MODE

Choose the Subwoofer On or OFF.

ESP (Electronic Shock Protection) MODE

Note: 10 sec./40 sec. for CD, 120 sec. for MP3 automatically works.

MULTI CD SELECTION

Choose CD MULTI ON or OFF. CD MULTI ON: Read multi section CD. CD MULTI OFF: Read first section only.

BEEP MODE

BEEP ON: BEEP sound can be heard from speaker when the buttons are pressed.

SEEK MODE

SEEK 1: When SEEK 1 mode is activated, AUTO SEEK SCAN is stopped when station is detected even user still push

SEEK button.

SEEK 2: Auto SEEK SCAN is not stopped even station is detected if user pushes SEEK button. When releases SEEK

button, then stop when station is detected.

STEREO/MONO

When FM stations are weak and are disturbed, listening can be improved by selecting MONO.

LOCAL/DX

“Local” position in areas with strong signals to let radio stop at only strong stations during manual tuning (LOC appears).

Select to Distant position in areas with weak signals to listen to all stations.

Digital tuner operations

Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in

you area, the following service is not available, either.

MODE

Press MODE button to turn on tuner mode.

BAND (BD)

Press BD button. Each band is toggled cyclically by pressing this key FM1--FM2--FM3--FM(OIRT)--MW1(AM1)--

MW2(AM2).

AUTOMATIC OR MANUAL TUNING

(FREQ UP- NEXT button or FREQ DOWN - PREVIOUS button)

When pressed shortly, these buttons are operated as MANUAL tuning mode. When pressed longer than 1 sec., they are

operated as SEEK tuning mode.

AUTO SEEK SEARCH TUNING (A/PS)

By pressing shortly, the radio searches for each preset station. By pressing longer than 1 sec, and then 6 strongest stations

are preset to the corresponding preset number. When AS operation is finished, the radio executes the preset scan.

SCAN AUTOMATIC TUNING CONTROL (SCAN)

This button is operated as RADIO SCAN. The operation is similar as normal search but different thing is holding 5 seconds

on every station detected in RADIO SCAN mode.

TA (TRAFFIC ALARM) FUNCTION

 Briefly press the TA button to turn on or turn off the TA function.

 When TA is enabled (on), the tuner starts searching the traffic announcement.

AF (ALTERNATIVE FREQUENCIES) FUNCTION

Briefly press the AF button to turn on or turn off the AF function.

The RDS program will be automatically searched and received. The unit will search another frequency with this RDS

program.

PTY (PROGRAM TYPE) FUNCTION

When PTY is selected the radio starts to search corresponding PTY information and stops of the corresponding PTY

information is detected. If corresponding PTY information is not found, normal radio reception is resumed.

When PTY mode is selected, the PTY switch is shared as follows: PTY music group — PTY speech group — OFF.

Press PTY button once to choose Music mode, then press number buttons to choose the needed program.

Press PTY button twice to choose Speech mode, then press number buttons to choose the needed program.

MUSIC SPEECH

Note: When pressed shortly, number buttons select a preset station directly. When pressed longer than 1 sec., current

station is stored in preset memory bank.

NEWS, AFFAIRS, INFO

SPORT, EDUCATE, DRAMA

CULTURE, SCIENCE, VARIED

WEATHER, FINANCE, CHILDREN

SOCIAL, RELIGION, PHONE IN

TRAVEL, LEISURE, DOCUMENT

1. POPM, ROCK M

2. EASY M, LIGHT M

3. CLASSICS, OTHER M

4. JAZZ, COUNTRY

5. NATION M, OLDIES

6. FOLK M

CD/SD/MMC operations

Discs for playback

This unit can play disc types: CD/CD-R/-RW.

Compatible with formats: CDDA/MP3/WMA.

Loading and ejecting a disc

1. Turn the power on.

2. Press the OPEN button on the panel.

3. Insert the disc with the printed side facing upward into the slot.

4. Press EJECT button on the inner side to eject the disc.

Multi-media card (MMC) / SD card slot

Support MP3/WMA ID3 format music only.

1. Press button and the front panel will open.

2. Detach the panel by pulling it towards you.

3. Carefully insert the SD/MMC card into the card slot, attach back the panel. Unit starts playback automatically.

SD/MMC notes:

1. SD/ MMC card support.

2. FAT 12/ FAT 16/ FAT 32 is possible

- FAT 12/16 (dir: 200 support, file:500 support),

- FAT 32 (dir: 200 support, file:500 support).

3. Filename: 32 byte/ Dir name: 32byte.

- Tag (id3tag ver2.0)

4. Title/ Artist/ Album: 32 byte support.

5. Multi card reader not support.

Note:

SD cards brands: Cannon, Fuji film, Palm, Motorola, Microsoft, IBM, HP, Compaq, Sharp, Samsung, etc.

Capacity: up to 2 GB.

MMC cards brands: Ericsson, Nokia, Motorola, HP, Palm, Sanyo, Microsystems, etc.

Capacity: up to 2 GB.

Note: Because of the great variety of products with SD and MMC card slots and their sometimes quite manufacturer-

specific functions the producer can neither guarantee that all devices will be recognized nor that all operating options that

are possible in theory will actually work.

ID3 Tag information

This unit supports ID3 tag ver2.0. If an MP3/WMA file has ID3 Tag information, it will be displayed on the LCD. If there

is no ID3 Tag information, nothing will be shown on LCD. The ID3 Tag information may include File, Folder, Music,

Album or Artist data.

NEXT/PREVIOUS

Press NEXT/PREVIOUS buttons to choose next or previous track. Press longer than 1 sec., to choose forward playback or

backward playback.

PLAY/PAUSE

Press PAUSE button to pause the playback, press one more time to resume the normal playback.

INTRO (Preview all Tracks)

When this button is pressed, “INT ON” indication is displayed and the first several seconds of each track of the disc is

played. Press again to stop intro and listen to track.

REPEAT

When RPT button is pressed, “RPT ON” indication is displayed and playback of the selected track will be continually

repeated until the track repeat mode is cancelled by pressing RPT button again.

RANDOM

When RDM button is pressed, “RDM ON” indication is displayed and each track of the disc is played in random instead of

normal order. To cancel RANDOM mode, press RDM button again.

TRACK DOWN/UP SELECT (In case of MP3/WMA files)

5 button: 10 Track down

6 button: 10 Track up

Selection of MP3/WMA files

1. Searching Track:

 Press A/PS, then searching track is activated.

 Press SEL button, then the first digit is blinking.

 Turn VOL knob to right or left, select first digit you want.

 Press SEL button, then the first digit is fixed and second digit is blinking.

 Turn VOL knob to right or left, select 2’nd 3’rd respectively.

 Then automatically the song you selected will start.

2. Searching File Name:

 Press A/PS twice, then file search is activated.

 Press SEL button, then the first directory is displayed.

 Turn VOL knob to right or left, you can select the directory you want.

 Press SEL button again, then the directory is fixed and the first file name is displayed.

Страница загружается ...

Hyundai H-CDM8038 Руководство пользователя

Бренд: Hyundai

Модель: H-CDM8038

Категория: Мультимедиа-приемники для автомобилей

Тип: Руководство пользователя

Скачать PDF

сообщить о нарушении

Hyundai H-CDM8038 Руководство пользователя

Hyundai H-CDM8038 Руководство пользователя

Похожие модели бренда

Модели других брендов