H- CDM8068
CD/MP3-RECEIVER CD/MP3-
Instruction manual
2
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before
connecting, operating and/or adjusting the product and keep the manual for reference in the future.
Table of contents
Table of contents..................................................................................................................................................2
Important safeguards............................................................................................................................................3
Installation/Connections.......................................................................................................................................4
Panel controls ......................................................................................................................................................7
Function of controls.............................................................................................................................................9
MP3 Overview...................................................................................................................................................14
Anti-Theft System .............................................................................................................................................15
Handling compact discs .....................................................................................................................................16
Cleaning ............................................................................................................................................................16
Troubleshooting guide .......................................................................................................................................17
Specification......................................................................................................................................................19
3
Important safeguards
· Read carefully through this manual to familiarize yourself with this high-quality sound system.
· Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.
· When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher
amperage rating may cause serious damage to the unit.
· DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.
· Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create
safety hazards such as electrical shock or laser beam exposure.
· If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes
normal before operating the unit.
· DO NOT open covers and do not repair yourself. Consult the dealer or an experienced technician for help.
· Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or
during a thunderstorm.
· Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an
unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified
technician check the system.
· The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please confirm
it before installation.
· Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or
burn out the power amplifier.
· Do not install the detachable panel before connecting the wire.
Remark:
· In addition to normal audio CD, this unit can play CD-R and CD-R/W disc that contain audio tracks as well;
however, depending on the conditions of the recording equipment, recording program or the CD-R as well as
CD-R/W disc itself, some CD-R or CD-R/W may not play.
· When making music CD with CD-R or CD-R/W disc, too high recording speed may result in poor signal quality
and therefore, it is recommend- able to select 24x or lower speed for CD-R recording and 4x or lower speed for
CD-R/W recording.
4
Installation/Connections
First complete the electrical connections, and then check them for correctness.
Installation way
It is an anti-theft installation way. The chassis wear a metal sliding housing. Please have the wiring connection of the
power supply, speakers and antenna as for the requirement of the manual, and then install the metal sliding housing
into the car according to the diagram.
5
6
Speaker connection
Notes:
· In spite of having any kinds of speaker system, must use 4 ohms impedance of speaker to reduce the distortion
during high volume level.
· Prohibit to make the conductors of auto antenna and ground touch with each other.
7
Panel controls
1. OPEN BUTTON.
Press it to flip down the front panel and you can insert the disc into the CD compartment or press the EJ button
to eject the disc from the disc compartment.
2. MODE BUTTON.
Press it to select RADIO or CD mode.
3. LCD (LIQUID CRYSTAL DISPLAY).
4. TA (Traffic Announcement) button.
5. POWER BUTTON.
Press any button except the EJECT and OPEN button to turn on the unit,
press PWR button hold for more than 0.5 seconds to turn off the unit. (After switching on the ACC POWER
first time for 3 seconds, can only turn on the unit).
6. V-SEL/ MENU/ ENTER (SEL); VOLUME-UP/DOWN, MENU-UP/DOWN (+/-) BUTTONS.
7. MUTE BUTTON.
8
Press the button to eliminate or resume the sound immediately. To resume the sound immediately, can also press
MODE, BAND, +, -, (LOUD), SEL button.
8. PRESET STATION [1-6] AND TOP/CDP, INT, RPT, RDM BUTTONS.
In MP3 mode 5 and 6 buttons are assigned as 10 TRACK up / down when normal play.
9. AUTO-STORAGE/PRESET MEMORY SCAN BUTTON.
10. PTY (Program Type) button.
11. AF (Alternative Frequencies) button.
12. BAND BUTTON.
Press it repeatedly to select your desired radio band during RADIO mode.
13. UP AND DOWN BUTTONS.
9
Function of controls
Volume mode
Press SEL button shortly and repeatedly to select sound mode VOLUME, BASS (without preset DSP),
TREBLE (without preset DSP),
BALANCE and FADER, then press + or - button to adjust level of the selected sound mode.
Menu mode
Press SEL button hold for more than 1 second to turn on MENU mode, and the LCD will display TA
SEEK/TA ALARM, then press SEL button shortly and repeatedly to select MASK DIP/ MASK ALL,
DSP OFF/ POP M/ ROCK M/ CLASS M/ FLAT M, LOUD ON/ LOUD OFF, ESP12/ ESP45, BEEP ON/ BEEP
OFF, SEEK 1/ SEEK 2, STEREO/ MONO, LOCAL/ DX, VOLT LAST/ VOL ADJ (When it is in VOL ADJUST
mode, the next mode will be A-VOL after VOL ADJUST mode, then you can adjust the volume level) in the
sequence and circulation. After select the desired MENU mode, press + or - button to select the mode of the
selected MENU.
MP3 Track search
In MP3 mode, press A.P button repeatedly to select TRACK SEARCH, FILE SEARCH or CHARACTER
SEARCH mode.
Press A.P button once to select TRACK SEARCH mode, the LCD will display TRK SCH. Press SEL
button to enter TRACK mode, the LCD will display 001 and flash unit s digit 1. Then press + or -
button to shift the unit s digit from 0 to 9 as a loop rotation. (Finally press SEL button hold for more than 0.5
seconds to play the selected track). Press SEL button to flash tens digit, then press + or - button to shift the tens digit
from 0 to 9 as a loop rotation. (Finally press SEL button hold for more than 0.5 seconds to play the selected track).
Press SEL button to flash hundreds digit, then press + or - button to shift the hundreds digit from 0 to 9 as a loop
rotation. Press SEL button to play the selected track.
10
Note:
· If the selected track number is bigger than the biggest track number in the MP3 disc, it will play the last track in
the MP3 disc.
MP3 File search
Press A.P button shortly twice to select FILE SEARCH mode, the LCD will display FILE SCH. Press
SEL button shortly once to select and display the first folder. Then press + or - button to select the
folder with step by step forward or backward. Press SEL button shortly once to select and display the first track of
the selected folder. Then press + or - button to select the track in the folder with step by step forward or backward.
Press SEL button shortly once to play the selected track. Press SEL button hold for more than 0.5 second to play the
first track of the selected folder.
MP3 Character search mode
Press A.P button shortly three times to select CHARACTER SEARCH mode, the LCD will display
CHAR SCH. Press SEL button shortly once to display A in the first digit from left to right. Then press +
or - button repeatedly to select one of A-Z and 0-9 and * to replace A. At this time press SEL button hold for more
than 0.5 seconds to play the track which first character is the selected one. Press SEL button shortly once to display
A in the second digit from left to right. Then press + or - button repeatedly to select one of A-Z and 0-9 and * to
replace A. Press SEL button shortly once to display A in the third digit from left to right. Then press + or - button
repeatedly to select one of A-Z and 0-9 and * to replace A. Operate as same as above to select the character in the
fourth, fifthtenth digit from left to right. Press SEL button hold for more than 0.5 second to play the track that the
name selected.
Note:
· It is possible to select 0-9 and * symbol with + and buttons.
Radio mode
1. In RADIO mode, press or button shortly and repeatedly to manually tune up or down for the desired radio
11
station with step by step. Press or button hold for more than 0.5 seconds to automatically tune up or down
for the radio station of strong signal.
2. In radio mode, press it to perform all stations memory for 5 second search time, while memory digital and
frequency will flash on LCD. If the button is pressed for more than 2 seconds, it will seek station on
current band, then write to the preset memories. When the auto-storage operation is completed, it will
automatically perform for 5 seconds each time. During the memory station performing, press 1-6 digital buttons to
select and stop scanning function.
3. When pressed short keys (1-6) and TOP/CDP, INT, RPT, RDM select a preset station directly. When pressed
longer than 1 second, current station is stored in preset memory bank.
CD Mode
In CD mode, press button to play next track. Press button once to play the current track from the beginning
of the current track, press button twice continuously to play the last track. Press or button hold to skip
forward or backward.
TA Mode
When press the button, it is activated as TA mode on or off. When TA mode is on (TA is displayed on LCD), it will
begin to seek TA station and TA SEEK will be displayed on LCD for a while.
When traffic announcement is transmitted:
- if the unit is in CD mode, it will switch to radio mode temporarily.
- temporarily switch over to an EON linked station when EON detects a traffic announcement on that other
program, and TP will be displayed on LCD.
- If volume level is below 20, volume level is raised to 20, and returns to its previous mode and volume level
when traffic announcement is over. If volume is adjusted during traffic announcement, only the previous
volume is valid.
TA interruption function:
12
The current traffic announcement is canceled by pressing this key. But the TA mode will not be off.
When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or saved only when traffic program
identification code has been received. When TA is on, traffic program identification code is not received during
specified time.
CD Mode
In CD mode:
- press TOP button to pause CD playback, press it again to resume CD playback. Press it hold for more than
about 0.5 seconds to play the first track of the disc.
- press INT button to play the first 10 seconds part of each track, press it again to stop INT mode and retain playing
the track currently selected.
- press RPT button to play the current track repeatedly. Press it again to cancel this mode.
- press RDM button to play the track in random order. Press it again to cancel this mode.
PTY Mode
Press it shortly and repeatedly to select one of the following mode:
PTY MUSIC group ª PTY SPEECH group ª PTY OFF
While selecting PTY TYPE, its selection is implemented by preset buttons as described in preset key (press one of
the 6 preset buttons shortly and repeatedly to select the PTY TYPE in the preset button). When PTY MUSIC or
PTY SPEECH is on, the previous PTY program and PTY word is displayed on LCD. If there are no keys entered for
2 seconds, previously selected PTY is searched. During 1 loop, if desired PTY is not found, NO PTY is flashed,
then return to previous normal radio and PTY word disappear.
When PTY mode is selected, the preset memory buttons is shared as follows:
PTY music group ª PTY speech group ª OFF
1. POP M, ROCK M 1. NEWS, AFFAIRS, INFO
2. EASY M, LIGHT M 2. SPORT, EDUCATE, DRAMA
3. CLASSICS, OTHER M 3. CULTURE, SCIENCE, VARIED
13
4. JAZZ, COUNTRY 4. WEATHER, FINANCE, CHILDREN
5. NATION M, OLDIES 5. SOCIAL, RELIGION, PHONE IN
6. FOLK M 6. TRAVEL, LEISURE, DOCUMENT
AF Mode
When pressed short, AF switching mode is selected and the state of AF switching mode is displayed by AF segment
in display.
Segment off: AF switching mode off.
Segment on: AF switching mode on, and has RDS information.
Segment flashing: AF switching mode on, but RDS information
When AF switching mode is selected, the radio checks the signal strength of AF all the time. The interval of
checking tine of each AFs depends on the signal strength of current station, from a few minute for strong station
to a few seconds for weak station. Every time that new AF is stronger than current station, it switches over to
that frequency for very short time, and NEW FREQUENCY is displayed for 1-2 second. Because the mute time
of AF switching or checking time is very short, it is almost inaudible in case of
During FM mode, when AF is on, SEEK. [SCAN]. AUTO-MEMORY function can only receive and save RDS
program.
When pressed long, AF mode is converted to REGION ON/OFF mode.
REGIONAL MODE ON:
AF switching or PI SEEK is implemented to the station which have all PI codes are same as current station ( PI
CODE is checked when AF CHECK in progress).
REGIONAL MODE OFF:
The regional code in the format of PI code is ignored when AF switching or PI SEEK is implemented. (PI CODE
and COVERAGE AREA is not checked when AF CHECK in progress).
14
MP3 Overview
Notes on MP3
· MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard.
· This product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs.
· The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support the MP3
data written by the method of packet write.
· The unit can not read an MP3 file that has a file extension other than .mp3.
· If you play a non- MP3 file that has the .mp3 extension, you may hear some noise.
· In this manual, we refer to what are called MP3 file and folder in PC terminology as track and album,
respectively.
· Maximum number of directory level is 8, including the root directory. Maximum number of files and folders per
disc is 256.
· The unit may not play tracks in the order of Track numbers.
· The unit plays only the audio tracks if a disc contains both audio tracks and MP3 files.
· When playing a disc of 8 kbps or VBR, the elapsed playing time in the display window will not be correct and
also the intro play may not function properly. VBR: Variable Bit Rate.
Notes on creating your own CD-Rs or CD-RWs containing MP3 files
· To enjoy high quality sound, we recommend converting to MP3 files with a sampling frequency of 44.1 kHz and
a fixed bit rate o f 128 kbps.
· DO NOT store more than 256 MP3 files per disc.
· For ISO 9660 - compliant format, the maximum allowable depth of nested folders is 8, including the root
directory (folder).
· When CD-R disc is used, playback is possible only for discs, which have been finalized.
· Make sure that when MP3 CD-R or CD-RW is burned that it is formatted as a data disc and NOT as an audio disc.
15
· You should not write non-MP3 files or unneeded folders along with MP3 files on the disc otherwise it takes a
long time until the unit starts to play MP3 files.
· With some CD-R or CD-RW media, data may not be properly written depending on their manufacturing quality.
In this case, data may not be reproduced correctly. High quality CD-R or CD-RW disc is recommended.
· Up to 16 characters are displayed for the name of an Album or a Track. ID3TAG version 1.x is required.
· Note that the unit may not play Tracks in the order that you wrote them to the disc.
Anti-Theft System
This unit is equipped with a slide-down detachable and mask panel. Panel can be detached and taken with you,
helping to deter theft.
Removing the panel
1.Press POWER button more than 0.5 seconds to switch off the power of the unit.
2.Press OPEN button to slide down the panel.
3.Hold the panel to pull it out, and then push back the panel bracket.
4.Place the panel into the case and take it with you when you leave the car.
Install the panel
1. Hold the panel so that the panel faces toward you and set the left side of the panel bracket.
2. Press the right side of the panel unit it locks.
3. Check the panel was fasten or not before you operation.
Remove the unit
1. Remove the panel and the trim plate.
2. Insert both T-Keys into hole in front of the set until they lock.
3. Pull out the unit.
16
Handling compact discs
· Dirty, scratched or warped discs may cause skip ping or noise.
· Handle the disc only by the edges. To keep clean do not touch its surface.
· Discs should be stored in their cases after use to avoid scratches.
· Do not expose discs to direct sunlight, high humidity, high temperature or dust.
· Prolonged exposure to extreme temperature can wrap the disc (such as leaving the discs in your car during
summertime).
· Do not stick or write anything on either side of disc. Sharp writing instruments, or the inks used in some felt-tip
pens, may damage its surface.
· DO NOT touch the unlabeled side. DO NOT attach any seal, label or data protection sheet to either side of a disc.
· This unit cannot play 3-inch ( 8cm ) CDs.
· Never insert a 3-inch CD contained in the adapter or an irregularly shaped CD. The unit may not be able to eject
it, resulting in a malfunction.
Cleaning
1. Cleaning the cabinet
Wipe with a soft cloth. If the cabinet is very dampen (not dropping wet) the cloth with a weak solution of soapy
water, and then wipe clean.
2. Cleaning discs
Fingerprints should be carefully wiped from the surface of disc with a soft cloth. Unlike conventional records,
compact discs have no grooves to collect dust and macroscopic dirt, so gently wiping them with a soft cloth should
remove must panicles. Wipe in a straight motion from the center to the edge.
Never use thinner benzine, record cleaner or anti static spray on a compact
disc. Such chemicals can damage its plastic surface.
17
Troubleshooting guide
Symptom
Cause Solution
General
No power
The car ignition is not on.
The fuse is blown.
If the power supply is properly connected
to the car accessory switch the ignition
key to " ACC ".
Replace the fuse.
Disc
Disc cannot be loaded.
Presence of CD disc inside the player. Remove the disc in the player then put a
new upward.
Disc cannot be read. Inserting the disc in upside down.
Compact disc is extremely dirty or
defective.
Temperature inside the car is too high.
Insert the compact disc with the label
facing upward.
Clean the disc or try to play a new one.
Cool off until the ambient temperature
returns to normal.
No sound Volume is in minimum.
Wiring is not properly connected.
Adjust volume to a desired level.
Check wiring connection.
The operation keys do
not work.
The built-in microcomputer is not
operating properly due to noise.
Front panel is not properly fix into its place.
Press the RESET button.
Reinstall the front panel.
Sound skips. The installation angle is more than 30
degrees.
The disc is extremely dirty or defective.
Adjust the installation angle to less than
30 degrees.
Clean the compact disc/try to play a new
one.
18
The radio does not
work,
the radio station
automatic selection
does not work.
The antenna cable is not connected the
signals are too weak.
Insert the antenna cable firmly select a
station manually.
19
Specification
Specifications are subject to change without notice. Mass and dimension are approximate.
General.
Power supply:
13.8V DC
Current consumption max. 15A
Maximum power output: 50Wx4 channels
Fuse: 15A
Dimensions (W x H x D) 178 x 50 x 165 mm
FM Stereo Radio. Frequency range: 64.0 -108.0 MHz
Usable sensitivity: 3 uV
I.F. Frequency: 10.7 MHz
MW Section
Frequency range:
522 kHz-1620 kHz
Usable sensitivity: 40 dB
I.F. Frequency: 450 kHz
Disc Player. System: Compact disc audio system No of quantization bits 1 bit.
Usable disc: CD/ CD-R/ CD-RW/ MP3
Signal format: Sampling frequency 44.1 kHz
Frequency characteristics: 20-100 Hz 5 dB
10-20 kHz 5 dB
Signal to noise CD: 50 dB (1kHz)
Number of channels: 2 stereo
Line out
Output:
CD max 1200 mV
20
!
.
, ,
.
........................................................................................................................................................20
...................................................................................................................................21
............................................................................................................................................25
............................................................................................................................27
3..........................................................................................................................................................33
..................................................................................................................................35
..........................................................................................................................35
......................................................................................................................................................36
...................................................................................................37
.............................................................................................................................39
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
/