Hyundai H-CDM8038 Руководство пользователя

  • Здравствуйте! Я прочитал руководство по эксплуатации для автомагнитолы HYUNDAI CDM8038. Готов ответить на ваши вопросы о её функциях, настройке и использовании. В руководстве подробно описаны подключение, режимы воспроизведения (CD, MP3, WMA, радио), настройка эквалайзера, работа с Bluetooth и многое другое.
  • Как сбросить настройки автомагнитолы?
    Как настроить время на дисплее?
    Как подключить Bluetooth-гарнитуру?
    Что делать, если диск не читается?
    Как переключать режимы воспроизведения (радио, CD, USB)?
H- CDM8038
CD/MP3/WMA – RECEIVER CD/MP3/WMA - 
Instruction manual 
2
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before
connecting, operating and/or adjusting the product and keep the manual for reference in the future.
Table of contents
Table of contents................................................................................................................................................................. 2
Important safeguards........................................................................................................................................................... 3
Accessories......................................................................................................................................................................... 4
Installation/Connections...................................................................................................................................................... 5
Panel controls..................................................................................................................................................................... 9
General operations.............................................................................................................................................................11
Digital tuner operations..................................................................................................................................................... 16
CD/SD/MMC operations .................................................................................................................................................. 18
MP3/WMA overview........................................................................................................................................................ 22
Bluetooth (hands-free) operations ..................................................................................................................................... 24
Anti-theft system .............................................................................................................................................................. 27
Handling discs.................................................................................................................................................................. 27
Cleaning ........................................................................................................................................................................... 28
Troubleshooting guide ...................................................................................................................................................... 29
Specification..................................................................................................................................................................... 30
3
Important safeguards
 Read carefully through this manual to familiarize yourself with this high-quality sound system.
 Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.
 When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage
rating may cause serious damage to the unit.
 Do not attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.
 Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create safety
hazards such as electrical shock or laser beam exposure.
 If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal
before operating the unit.
 Do not open covers and do not repair yourself. Consult the dealer or an experienced technician for help.
 Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or during a
thunderstorm.
 Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual
sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified technician check
the system.
 The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please confirm it
before installation.
 Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or burn
out the power amplifier.
 Do not install the detachable panel before connecting the wire.
 Do not use the unit in places where it can be exposed to water, moisture and dust.
4
Accessories
Mounting parts
Receiver 1 pc
Bluetooth headset 1 pc
Bluetooth headset pouch 1 pc
Bluetooth headset ear clip 1 pc
Front panel 1 pc
Front panel case 1 pc
Customer information 1 pc
Warranty card 1 pc
Instruction manual 1 pc
5
Installation/Connections
Use only the supplied mounting hardware for a safe and secure installation. Be sure to remove the front panel before
installing the unit.
Mounting angle adjustment
Adjust the mounting angle to less than 20°.
Installation in the dashboard
Note: Keep the release key in a safe place as you may need it in the future to remove the unit from the car.
6
1. Unit
2. Release case
3. Dash board
4. Hex nut
5. Lock washer
6. Plain washer
7. Car body
8. Rear support strap
9. Tapping screw
10. Hex bolt
7
Electrical connections
8
ISO connector
Location
Function
Connector A Connector B
1 Rear Right(+)---Violet
2 Rear Right(-)---Violet/Black stripe
3 Front Right(+)---Grey
4 Battery 12V (+)/yellow Front Right(-)---Grey/Black Stripe
5 Power Antenna/blue Front Left(+)---White
6 Front Left((-)---White/Black Stripe
7 ACC+/red Rear Left(+)---Green
8 Ground/black Rear Left(-)---Green/Black Stripe
9
Panel controls
Front panel
1. POWER button
2. SEL button
3. VOL knob
4. Preset stations (1,2,3,4,5,6)
5. AF button
6. TA button
7. PTY button
8. DISP button
9. MODE button
10. BD button
11. PREVIOUS/NEXT button
12. A/PS button
13. SCAN button
14. MUTE/DUAL ILLUMINATION button
15. LCD display
16. OPEN button
17. CD slot
18. EJECT button
19. PAUSE button
20. INT button
21. RPT button
22. RDM button
23. 24. + 10/ -10 TRACK SEARCH DOWN/UP button
10
25. Multi-media card (MMC)/SD card slot
26. Wireless bluetooth headset
27. RESET button
28. Status indicator light
Note: Pressing the RESET button will erase the clock setting and stored stations.
Panel status indicator lights up when you slide the panel down; flashes when you
remove the panel.
11
General operations
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit.
Press OPEN button on the panel to open the panel and press the RESET button with thin hard object to restore the unit to
the original factory settings.
Power ON/OFF
Press any button to turn the unit on. Press and hold POWER button to turn off the unit.
Note: After the unit is off, the volume level and radio current settings will be memorized, and when you turn the unit on it
will resume the stored status, which you set.
Display (DISP)
Press DISP button to switch between display information such as radio frequencies, clock, track and other information
depending on the playing MODE.
To adjust the time:
 Press DISP button until clock is showed press the DISP button and hold for 2 seconds. Time will start blinking.
 Rotate the VOL knob clockwise to adjust minute.
 Rotate the VOL knob anticlockwise to adjust hour.
 Press DISP button again to save setting.
Mode
By pressing this button, user can select: AUX/TUNER/S-CDP(CD/MP3)/ MMC/SD mode.
Mute
Press this button to mute the sound at once. Press again to return to the previous volume level.
12
Dual illumination
When press the MUTE button for more than 2 seconds, it is activated as selecting Blue or Red buttons illumination.
Volume control/SELECT
Rotating this knob, you can adjust VOL/BASS/TREB/BAL/FAD. To select the functions, press SEL button shortly until
the desired functions are shown on the display.
Increase or decrease the volume by turn the VOL knob right or left. These buttons can be used to adjust the BASS,
TREBLE, BALANCE and FADER.
Other functions
To choose the corresponding mode, press SEL button for 2 seconds, and then press it repeatedly until the display shows the
mode. Rotate the knob to choose the needed value. After choosing, please leave the unit idle to activate.
TA SEEK/TA ALARM
In TA SEEK mode, the unit will seek for traffic announcement program when TA is pressed; in TA ALARM mode the
alarm is set off.
MASK DPI/MASK ALL
During MASK DPI mode, the unit will mask only the AF which has different PI, this is the default mode; during MASK
ALL mode, the unit will mask the AF which has different PI and no RDS signal with high field strength.
13
RETUNE S/L - SHORT/LONG
RETUNErefers to the time period the unit allows for radio scan when reception is interrupted. Srepresents a time
period of 30 seconds and “L” represents a time period of 90 seconds.
AUDIO DSP CONTROLS
Choose equalizer mode: POP M => ROCK M => CLASS M=> FLAT M =>DSP OFF.
LOUDNESS CONTROLS
Select LOUD ON or OFF. In ON mode the bass and treble response will be boosted.
SUBWOOFER MODE
Choose the Subwoofer On or OFF.
14
ESP (Electronic Shock Protection) MODE
Note: 10 sec./40 sec. for CD, 120 sec. for MP3 automatically works.
MULTI CD SELECTION
Choose CD MULTI ON or OFF. CD MULTI ON: Read multi section CD. CD MULTI OFF: Read first section only.
BEEP MODE
BEEP ON: BEEP sound can be heard from speaker when the buttons are pressed.
SEEK MODE
15
SEEK 1: When SEEK 1 mode is activated, AUTO SEEK SCAN is stopped when station is detected even user still push
SEEK button.
SEEK 2: Auto SEEK SCAN is not stopped even station is detected if user pushes SEEK button. When releases SEEK
button, then stop when station is detected.
STEREO/MONO
When FM stations are weak and are disturbed, listening can be improved by selecting MONO.
LOCAL/DX
Local” position in areas with strong signals to let radio stop at only strong stations during manual tuning (LOC appears).
Select to Distant position in areas with weak signals to listen to all stations.
16
Digital tuner operations
Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in
you area, the following service is not available, either.
MODE
Press MODE button to turn on tuner mode.
BAND (BD)
Press BD button. Each band is toggled cyclically by pressing this key FM1--FM2--FM3--FM(OIRT)--MW1(AM1)--
MW2(AM2).
AUTOMATIC OR MANUAL TUNING
(FREQ UP- NEXT button or FREQ DOWN - PREVIOUS button)
When pressed shortly, these buttons are operated as MANUAL tuning mode. When pressed longer than 1 sec., they are
operated as SEEK tuning mode.
AUTO SEEK SEARCH TUNING (A/PS)
By pressing shortly, the radio searches for each preset station. By pressing longer than 1 sec, and then 6 strongest stations
are preset to the corresponding preset number. When AS operation is finished, the radio executes the preset scan.
SCAN AUTOMATIC TUNING CONTROL (SCAN)
This button is operated as RADIO SCAN. The operation is similar as normal search but different thing is holding 5 seconds
on every station detected in RADIO SCAN mode.
17
TA (TRAFFIC ALARM) FUNCTION
 Briefly press the TA button to turn on or turn off the TA function.
 When TA is enabled (on), the tuner starts searching the traffic announcement.
AF (ALTERNATIVE FREQUENCIES) FUNCTION
Briefly press the AF button to turn on or turn off the AF function.
The RDS program will be automatically searched and received. The unit will search another frequency with this RDS
program.
PTY (PROGRAM TYPE) FUNCTION
When PTY is selected the radio starts to search corresponding PTY information and stops of the corresponding PTY
information is detected. If corresponding PTY information is not found, normal radio reception is resumed.
When PTY mode is selected, the PTY switch is shared as follows: PTY music group — PTY speech group — OFF.
Press PTY button once to choose Music mode, then press number buttons to choose the needed program.
Press PTY button twice to choose Speech mode, then press number buttons to choose the needed program.
MUSIC SPEECH
Note: When pressed shortly, number buttons select a preset station directly. When pressed longer than 1 sec., current
station is stored in preset memory bank.
1
2
3
4
5
6
NEWS, AFFAIRS, INFO
SPORT, EDUCATE, DRAMA
CULTURE, SCIENCE, VARIED
WEATHER, FINANCE, CHILDREN
SOCIAL, RELIGION, PHONE IN
TRAVEL, LEISURE, DOCUMENT
1. POPM, ROCK M
2. EASY M, LIGHT M
3. CLASSICS, OTHER M
4. JAZZ, COUNTRY
5. NATION M, OLDIES
6. FOLK M
18
CD/SD/MMC operations
Discs for playback
This unit can play disc types: CD/CD-R/-RW.
Compatible with formats: CDDA/MP3/WMA.
Loading and ejecting a disc
1. Turn the power on.
2. Press the OPEN button on the panel.
3. Insert the disc with the printed side facing upward into the slot.
4. Press EJECT button on the inner side to eject the disc.
Multi-media card (MMC) / SD card slot
Support MP3/WMA ID3 format music only.
1. Press button and the front panel will open.
2. Detach the panel by pulling it towards you.
3. Carefully insert the SD/MMC card into the card slot, attach back the panel. Unit starts playback automatically.
SD/MMC notes:
1. SD/ MMC card support.
2. FAT 12/ FAT 16/ FAT 32 is possible
- FAT 12/16 (dir: 200 support, file:500 support),
- FAT 32 (dir: 200 support, file:500 support).
3. Filename: 32 byte/ Dir name: 32byte.
- Tag (id3tag ver2.0)
4. Title/ Artist/ Album: 32 byte support.
19
5. Multi card reader not support.
Note:
SD cards brands: Cannon, Fuji film, Palm, Motorola, Microsoft, IBM, HP, Compaq, Sharp, Samsung, etc.
Capacity: up to 2 GB.
MMC cards brands: Ericsson, Nokia, Motorola, HP, Palm, Sanyo, Microsystems, etc.
Capacity: up to 2 GB.
Note: Because of the great variety of products with SD and MMC card slots and their sometimes quite manufacturer-
specific functions the producer can neither guarantee that all devices will be recognized nor that all operating options that
are possible in theory will actually work.
ID3 Tag information
This unit supports ID3 tag ver2.0. If an MP3/WMA file has ID3 Tag information, it will be displayed on the LCD. If there
is no ID3 Tag information, nothing will be shown on LCD. The ID3 Tag information may include File, Folder, Music,
Album or Artist data.
NEXT/PREVIOUS
Press NEXT/PREVIOUS buttons to choose next or previous track. Press longer than 1 sec., to choose forward playback or
backward playback.
PLAY/PAUSE
Press PAUSE button to pause the playback, press one more time to resume the normal playback.
INTRO (Preview all Tracks)
When this button is pressed, “INT ON” indication is displayed and the first several seconds of each track of the disc is
played. Press again to stop intro and listen to track.
20
REPEAT
When RPT button is pressed, “RPT ON” indication is displayed and playback of the selected track will be continually
repeated until the track repeat mode is cancelled by pressing RPT button again.
RANDOM
When RDM button is pressed, “RDM ON” indication is displayed and each track of the disc is played in random instead of
normal order. To cancel RANDOM mode, press RDM button again.
TRACK DOWN/UP SELECT (In case of MP3/WMA files)
5 button: 10 Track down
6 button: 10 Track up
Selection of MP3/WMA files
1. Searching Track:
 Press A/PS, then searching track is activated.
 Press SEL button, then the first digit is blinking.
 Turn VOL knob to right or left, select first digit you want.
 Press SEL button, then the first digit is fixed and second digit is blinking.
 Turn VOL knob to right or left, select 2’nd 3’rd respectively.
 Then automatically the song you selected will start.
2. Searching File Name:
 Press A/PS twice, then file search is activated.
 Press SEL button, then the first directory is displayed.
 Turn VOL knob to right or left, you can select the directory you want.
 Press SEL button again, then the directory is fixed and the first file name is displayed.
/