Blackmagic Studio Camera Руководство пользователя

Installation and Operation Manual

Blackmagic

Studio Cameras

September 2018

English,

日本語, Français, Deutsch, Español,

中文, 한국어, Русский

,

Italiano, Português and Türkçe.

Languages

To go directly to your preferred language, simply click on the hyperlinks listed in the

contents below.

English 3

日本語 63

Français 124

Deutsch 185

Español 246

中文 307

한국어 368

Русский 429

Italiano 490

Português 551

Türkçe 612

Welcome

Thank you for purchasing a Blackmagic Studio Camera!

We are extremely excited to have designed the Blackmagic Studio Camera and Micro

Studio Camera 4K. Ever since I was a teenager I have loved live production, it’s so exciting!

Traditionally cameras with talkback and tally were very expensive and physically large,

so hard to manage. We really wanted to solve this problem by designing a more compact

camera that included all the talkback, tally and camera control features of physically

much larger cameras.

That’s why the Blackmagic Studio Camera was developed. We wanted to build a much

smaller camera for portability, however normally small cameras have small tiny screens.

We did not want that. What we really wanted was a much larger viewfinder! The result is

Blackmagic Studio Camera, a small broadcast camera with a very large viewfinder that’s

wonderful to use! Precise focus and framing are so easy with a viewfinder this large!

Of course you get tally indicators, talkback, of course a fantastic quality camera with

flexible MFT lens mount. It’s everything you need in a complete package! You can plug

in larger wind protected microphones even with phantom power and with user installable

optical fiber, you can add an SFP module when you need to run your camera miles away

from your switcher! If you need, you can even add a HyperDeck Shuttle and use the

camera for general production use!

Blackmagic Micro Studio Camera 4K takes the small size and capability of Blackmagic

Studio Camera even further! This tiny camera pairs an amazing Ultra HD sensor with

an incredibly tiny chassis and a host of remote control options. Now you can capture

broadcast production footage from previously impossible locations, all with complete

control from an ATEM switcher or via custom remote.

We hope you use your new camera for some amazing live productions and produce some

fantastic looking work! We are extremely excited to see what creative work you produce!

Grant Petty

CEO Blackmagic Design

English

Contents

Blackmagic Studio Cameras

Getting Started 5

Attaching a Lens 5

Turning Your Camera On 5

Connecting to a switcher 6

Camera Features 8

Blackmagic Studio Camera Features 8

Blackmagic Micro Studio

Camera 4K Features 10

Camera Connections 13

Blackmagic Studio Camera – Left Side 13

Blackmagic Studio Camera – Right Side 14

Blackmagic Micro

StudioCamera4K – Left Side 15

Blackmagic Micro

StudioCamera4K – Right Side 16

Customization 17

Blackmagic Micro Studio

Camera 4K Expansion Cable 17

Wiring diagram for the

Blackmagic MicroStudio

Camera 4K Expansion Cable 18

Settings 19

Camera Settings 19

Audio Settings 21

Monitoring Settings 22

Studio Settings 24

Remote Settings 25

Button Settings 27

Camera Video Output 29

Connecting to Video Switchers 29

Connecting to Recorders 30

Remote Record 30

RAW SDI Output 30

Connecting Tally using the

Blackmagic3G-SDI Shield for Arduino 31

Blackmagic Camera Setup 33

Attaching Accessories 34

Sun Shade 34

Other Accessories 34

Using ATEM Software Control 35

Introducing Camera Control 35

Using Camera Control 37

DaVinci Resolve Primary

ColorCorrector 41

PTZ Control over SDI 43

VISCA commands 44

PTZ with Blackmagic 3G-SDI

Shield for Arduino 45

Controlling your Arduino 46

Developer Information 48

Blackmagic SDI Camera

Control Protocol 48

Example Protocol Packets 56

Blackmagic Embedded

TallyControl Protocol 57

RAW SDI Output 58

Help 61

Warranty 62

Contents

Getting Started

Attaching a Lens

Getting started with your Blackmagic Studio Camera or Blackmagic Micro Studio Camera 4K is as

simple as attaching a lens and turning the camera on. To remove the protective dust cap from the

lens mount, hold down the locking button and rotate the cap counterclockwise until itis released.

We recommend you always turn off your Blackmagic camera prior to attaching or removing a lens.

To attach a lens:

1 Align the dot on your lens with the dot on the camera mount. Many lenses have either

ablue, red or white dot or some other indicator.

2 Twist the lens clockwise until it locks into place.

3 To remove the lens, hold down the locking button, rotate the lens counterclockwise

until its dot or indicator reaches the 12 o’clock position and gently remove.

When no lens is attached to the camera, the lens mount is exposed to dust and other debris

soyou’ll want to keep the dust cap on whenever possible.

1

3

PUSH

2

1

3

PUSH

2

1

3

PUSH

2

1

3

PUSH

2

Attaching and removing a lens on Studio Camera.

Attaching and removing a lens on Micro Studio Camera 4K.

Turning Your Camera On

1 Press the power button below the LCD. On Blackmagic Studio Camera and Studio

Camera 4K models, the live camera image will appear on the LCD.

2 Press and hold the power button to switch off the camera.

TIP Blackmagic Studio Camera HD and Studio Camera 4K have internal batteries that

can be charged using the supplied power adapter. These camera can be charged and

operated while connected via external power and will switch between power sources

without interruption. Blackmagic Studio Camera 2 and Studio Camera 4K 2 does not

contain an internal battery and does not need to be charged.

5Getting Started

Micro Studio Camera 4K accepts LP-E6 and LP-E6N batteries, which can be charged with an

external battery charger or slowly trickle charged by the camera. The camera can also be

charged and operated via external power and will switch between power sources automatically

if external power is interrupted. External power is provided via the Micro Studio Camera 4K’s

expansion port.

1 Press the power button on the right hand side of the camera. The tally light will glow

white to indicate the camera is on.

2 Press and hold the power button to switch off your camera.

That’s all there is to getting started. You can now connect your camera to a switcher,

orATEMConverter, and start creating your live production!

Use the supplied power adapter to power the Studio Camera.

Connecting to a switcher

Your Blackmagic Studio Camera and Micro Studio Camera 4K can be remotely controlled from

an ATEM switcher via SDI for fast, interactive camera control during your live production.

Connecting via SDI

1 Connect your Blackmagic Studio Camera’s and Micro Studio Camera 4K’s SDI output to

any SDI input on the ATEM switcher.

2 Connect any one of the ATEM switcher’s SDI outputs, except down converted or multi

view outputs, to your Studio Camera’s SDI program input. Camera control signals are

not sent via the multi view and down converted SDI outputs.

TIP If you have the optional SFP Optical Module installed, you can use optical fiber to

connect your Blackmagic Studio Camera to an ATEM Switcher. This is great for long

cable runs as optical fiber can carry a signal up to 28 miles.

An ATEM Studio Converter or ATEM Talkback Converter 4K is required to complete the

connection to your ATEM Switcher. For more information on optical fiber setup refer to

the ‘connection diagrams’ section in the ATEM Converters manual.

OPTICAL OUT

OPTICAL IN

SDI OUT

SDI IN

REF

12V

OPTICAL OUT

OPTICAL IN

SDI OUT

SDI IN

REF

12V

6Getting Started

To connect your camera to an ATEM switcher, simply plug your camera’s

SDIoutput into any of your switcher’s SDI inputs. For camera control,

plug any of the ATEM switcher’s non down-converted outputs to your

camera’s programSDIinput. A quick and easy way to plug your switcher

into the camera isto connect one of the switcher’s program outputs.

Setting Button Mapping and Tally

Open ATEM Software Control Preferences and set the switcher’s button mapping settings to

make sure you are switching the right camera with correct tally.

To set the mapping settings:

1 Click on the menu bar at the top of the screen and open the ATEM Software Control

Preferences.

2 Click on the ‘Mapping’ tab and check the buttons correspond with the correct input.

Forexample, because your Studio Camera is connected to input 1 on your switcher,

‘Button 1’ should be set to ‘Input 1: Camera 1’.

3 On your Blackmagic Studio Camera, press ‘Menu’. Navigate to Studio Settings>Camera

Number and set it to match the switcher input. In this example, your Studio Camera is

connected to Cam 1 on the ATEM switcher, so the camera number must also be set to 1.

This ensures tally is sent to the correct camera.

Now that everything is plugged in and mapping is set, you can check that the program output

can be monitored on your camera and confirm that tally is working. A fast way to check is to

press the program button on your Blackmagic Studio Camera, then switch color bars to the

program output on your ATEM switcher. If you see color bars on your camera, you know the

program output is working properly with your camera.

Now switch camera 1 to the program output. The tally light on the Studio Camera should now

illuminate. If not, double check your camera number is set to the corresponding input on the

switcher, and that the mapping settings in the switcher are correct.

Using Camera Control

Your Blackmagic Studio Camera can be controlled from an ATEM switcher using the Camera

Control feature in ATEM Software Control.

Launch ATEM Software Control and click on the ‘Camera’ button located at the bottom of the

software window to open the camera control page. You will see a row of labeled camera

controllers containing tools to adjust and refine each camera’s image. Camera 1 is labelled

‘Cam 1.’ If the camera is switched to the program output it will display a red ‘On Air’ status.

Inside the ‘Cam 1’ controller you can make camera adjustments including color correction, lens

control on compatible lenses, camera settings and more. For more details on how to use the

camera control features, refer to the ‘using ATEM software control’ section for more information.

PUSH PUSH

CONTROL

USB 2.0 HDMI IN

SDI INPUTS REF IN AUX 1-3 PREVIEW PROGRAM OUTPUTS MULTI-VIEW ANALOG AUDIO IN

STEREO IN

REMOTE

ANALOG AUDIO OUT

CH 1

All SDI and HDMI video connections are

SD, HD and Ultra HD switchable unless indicated

CH 2CH 1 CH 2

IN

1

IN

2

IN

1

IN

3

IN

4

IN

5

IN

6

IN

7

IN

8

IN

9

IN

10

2

1 3

2

1

HD HD HD

PUSH PUSH

CONTROL

USB 2.0 HDMI IN

SDI INPUTS REF IN AUX 1-3 PREVIEW PROGRAM OUTPUTS MULTI-VIEW ANALOG AUDIO IN

STEREO IN

REMOTE

ANALOG AUDIO OUT

CH 1

All SDI and HDMI video connections are

SD, HD and Ultra HD switchable unless indicated

CH 2CH 1 CH 2

IN

1

IN

2

IN

1

IN

3

IN

4

IN

5

IN

6

IN

7

IN

8

IN

9

IN

10

2

1 3

2

1

HD HD HD

PUSH PUSH

CONTROL

USB 2.0 HDMI IN

SDI INPUTS REF IN AUX 1-3 PREVIEW PROGRAM OUTPUTS MULTI-VIEW ANALOG AUDIO IN

STEREO IN

REMOTE

ANALOG AUDIO OUT

CH 1

All SDI and HDMI video connections are

SD, HD and Ultra HD switchable unless indicated

CH 2CH 1 CH 2

IN

1

IN

2

IN

1

IN

3

IN

4

IN

5

IN

6

IN

7

IN

8

IN

9

IN

10

2

1 3

2

1

HD HD HD

7Getting Started

Connecting to a Recorder

You can also connect your Blackmagic Studio Camera to an external recorder, for example a

Blackmagic HyperDeck Studio disk recorder for indoor studio recording. Or even mount a

HyperDeck Shuttle or Blackmagic Video Assist to your studio camera and loop through to the

switcher for ISO recordings during an outside broadcast.

That’s all there is to getting started! Live production is exciting and your Blackmagic Studio

Camera is designed to give you an easy and fun experience. Please keep reading the manual

to learn about all the different features and settings on your Blackmagic Studio Camera.

Camera Features

Blackmagic Studio Camera Features

Front Panel

1 Front Tally Light

Indicates to the on-air talent which camera is currently “live”. See the

‘monitoringsettings’ section in this manual for more details.

Left Panel

2 LANC Remote

2.5mm stereo jack for LANC remote control supports iris, zoom and focus control.

3 Aviation Headphones

0.25” TRS connector for monitoring PGM and control room audio with aviation

style headsets.

4 Headphones Microphone Input

0.206” TRS connector for talking to the control room with aviation style headsets.

5 Audio Inputs

2 x 1/4” balanced XLR connectors for audio input. Refer to the ‘Blackmagic Studio

Camera - left side’ section in this manual for more details.

1

PUSH

2

PUSH

FOCUS

SDI OUT

OPTICA

L OUT

OPTICAL IN

SDI IN

REF

12V

IRIS PTT PGM LUT SET DISPLAY MENU

1

PUSH

2

PUSH

FOCUS

SDI OUT

OPTICA

L OUT

OPTICAL IN

SDI IN

REF

12V

IRIS PTT PGM LUT SET DISPLAY MENU

4

5

2

3

8Camera Features

Right Panel

6 Optical Input/Output

Optical input and output allows cable runs of up to 28 miles when the optional

SFPoptical module is fitted.

7 SDI Out

SDI output for connecting to a switcher or other device.

8 SDI In

SDI input allows the camera operator to view the Program (PGM) output.

9 Reference Input

Allows multiple cameras to be genlocked to a blackburst or tri-level reference signal.

10 Power

12 – 24V power input for power supply and battery charging, where applicable. Refer to

the ‘Blackmagic Studio Camera - right side’ section in this manual for more details.

Rear Panel

11 10” LCD

Monitor live camera output or program output, or view the menu. See the ‘monitoring

settings’ in this manual for more details.

12 Rear Tally Light

When lit, it indicates to the camera operator that their camera is currently live.

13 Focus Button

Press once to auto focus or twice to display focus peaking on the LCD.

14 Iris Button

Press once for auto exposure.

15 Push To Talk Button PTT

Press and HOLD to talk. Press twice in quick succession for hands free communication.

Press again to revert to the default behavior.

16 Program PGM Button

Press to toggle between live camera output and program output from a switcher

control room.

17 Look Up Table LUT Button

Currently not implemented.

18 Menu Navigation Buttons

Navigate the menu on the LCD.

1

PUSH

2

PUSH

FOCUS

SDI OUT

OPTICAL OUT

OPTICAL IN

SDI IN

REF

12V

IRIS PTT PGM LUT SET DISPLAY MENU

6

7

8

9

10

1

PUSH

2

PUSH

FOCUS

SDI OUT

OPTICA

L OUT

OPTICAL IN

SDI IN

REF

12V

IRIS PTT PGM LUT SET DISPLAY MENU

11

12

13 14

15

2016 21

17

221918 18

9Camera Features

19 Set Button

Use this button to confirm your menu selections.

20 Display Button

Press this button to toggle overlays on and off.

21 Menu Button

Access the menu on the LCD.

22 Power Button

Press the power button to turn on the Blackmagic Studio Camera. Press and hold the

button to turn the camera off. Refer to the ‘button settings’ section in this manual for

more details.

Bottom Panel

23 USB Connector

USB Mini-B port for camera firmware updates. See ‘Blackmagic Camera Setup’ section in

this manual.

Blackmagic Micro Studio Camera 4K Features

Front Panel

1 Tally Light

The Tally light indicates to on air talent which camera is currently ‘live,’ as well as

alerting the operator to the status of the camera.

The following scenarios are possible:

White Powered

Green Preview

Red Live

Alternating red and orange Battery low when live

Alternating white and orange Battery low

You can adjust the brightness of the tally light in Micro Studio Camera 4K’s settings.

See the ‘camera settings’ section for more information.

1

PUSH

2

PUSH

FOCUS

SDI OUT

OPTICA

L OUT

OPTICAL IN

SDI IN

REF

12V

IRIS PTT PGM LUT SET DISPLAY MENU

23

1

10Camera Features

Left Panel

2 HDMI Out

The HDMI output lets you preview your video output and navigate the camera menus

using external monitors such as Blackmagic Video Assist. Output resolution is always

1080HD, unless you have 720p selected, in which case the output resolution will also

be 720p. You can choose to display overlays such as frame guides, a histogram, and

audio levels. See the ‘monitoring settings’ section in this manual for more details.

3 Expansion Port

DB-HD15 connector. Used for external power input and a range of remote control

options as well as reference input. See the section ‘Blackmagic Micro Studio Camera

4K Expansion Cable’ for details.

4 Menu Button

Use the menu buttons to access the camera’s built in menu which can be displayed on

an attached HDMI display.

5 Up Button

Use the button to navigate menus.

6 Down Button

Use this button to navigate menus.

7 Set Button

Use this button to confirm your menu selections.

8 Power Button

Press the power button to turn on the Blackmagic Micro Studio Camera 4K. Press and

hold the button to turn the camera off.

Right Panel

9 Analog Audio In

3.5mm stereo audio input, switchable between microphone and line-level input in menu.

10 SDI Out

SDI output for connecting to a switcher, external recorder or other device.

4

5

2

3

6

7

8

9

10

11

12

11Camera Features

11 SDI In

SDI input allows camera control via ATEM switchers or the Blackmagic 3G-SDI Shield

for Arduino.

12 Headphone / Talkback

3.5mm jack for talkback with iPhone and Android style headsets. Double press the

play/pause button on your headset to toggle talkback on and press it once again to turn

talkback off.

Rear Panel

13 Battery Slot

Blackmagic Micro Studio Camera 4K comes with one LP-E6 battery which fits into this

slot. The battery will be trickle charged while the camera is connected to power via its

expansion port.

Top Panel

14 Battery Release

Slide forward to release the battery.

Bottom Panel

15 USB Connector

USB port for camera firmware updates.

See the ‘Blackmagic Camera Setup’ section in this manual.

13

14

15

12Camera Features

Camera Connections

Blackmagic Studio Camera – Left Side

LANC Remote Control

The remote port on your camera is used to remotely control lens focus, iris and zoom

adjustments when using a compatible lens. The port takes a 2.5 mm stereo jack using the

standard LANC protocol.

Active MFT lenses allow you to control the zoom servo with a LANC controller. The following

lenses are currently supported:

 Panasonic Lumix G X Vario PZ 14-42mm f/3.5-5.6 Power O.I.S. Lens

 Panasonic Lumix G X Vario PZ 45-175mm f/4.0-5.6 Zoom O.I.S. Lens

 Olympus M.Zuiko Digital ED 12-50mm f/3.5-6.3 EZ Micro 4/3 Lens

 Olympus M.Zuiko Digital ED 14-42mm f/3.5-5.6 EZ Micro 4/3 Lens

Headphones Output

For monitoring program and control room audio with aviation style headsets with “fixed wing”

connectors. Aviation headsets range from single ear models for use in studio environments to

full size noise cancelling models which are suitable for loud concerts or sporting events. Audio

is taken from channel 15 and 16 of the incoming SDI signal. Channels 15 and 16 are rarely if ever

used during production and so are very suitable to serve for the audio talkback.

Headphones Microphone Input

For talking to the control room with aviation style headsets. Audio is embedded into channel

15and 16 of the SDI signal output.

Audio Inputs

Two channels of professional balanced analog audio is supported via XLR connectors. Use the

audio menu to set the input levels for each channel. The inputs support both mic level inputs

and line level inputs and the input type is also selected from the audio menu. Audio is

embedded into channel 1 and 2 of the SDI stream.

1

3

PUSH

2

1

3

PUSH

2

13Camera Connections

Blackmagic Studio Camera – Right Side

Optical Input/Output

For optical fiber input and output, you will need to install an optional optical fiber SFP module.

This lets you connect industry standard LC connectors, supporting 3G-SDI on Studio Camera

HD, and 6G-SDI on Studio Camera 4K. Optical fiber cable is widely available because it’s the

same cable used in computer networking. Optical fiber allows cable runs of up to 28 miles

which is more than enough for even the most demanding outside broadcast event.

If both optical and SDI inputs are connected, the output from the device which was connected

first will be used. To purchase an optical fiber SFP module for your Blackmagic Studio Camera,

contact your nearest Blackmagic Design reseller. You can find your nearest reseller on our

website at www.blackmagicdesign.com/resellers.

SDI Out

Use the SDI Out connector to output 10-bit 4:2:2 video to professional SDI video equipment

such as routers, monitors, SDI capture devices and broadcast switchers. Blackmagic Studio

Camera HD supports 3G-SDI, and Studio Camera 4K supports 12G-SDI.

SDI In

The SDI input allows the camera operator to view the Program (PGM) output. Simply press the

PGM button to toggle between live camera output and Program output from a switcher

control room.

If both optical and SDI inputs are connected, the output from the device which was connected

first will be used. If you’re using the Studio Camera to record to a device such as the

Blackmagic Hyperdeck Shuttle, the output from the Hyperdeck can be connected to the SDI

input so you can playback what you have just recorded.

Reference Input

This allows multiple cameras to be genlocked to a blackburst or tri-level reference signal.

Genlocking cameras to an external reference signal helps to prevent timing errors which may

result in the picture jumping when switching between different cameras.

OPTICAL OUT

OPTICAL IN

SDI OUT

SDI IN

REF

12V

14Camera Connections

Power

Use the 12 - 24V power input for connecting your power supply and to charge the internal

battery in Blackmagic Studio Camera HD and Blackmagic Studio Camera 4K. When the battery

in these cameras is charged it will power the camera for up to 4 hours on Studio Camera HD,

and up to 3 hours on Studio Camera 4K.

Blackmagic Studio Camera 2 and Studio Camera 4K 2 do not have internal batteries.

Blackmagic Micro StudioCamera4K – Left Side

HDMI Output

The HDMI port on your Blackmagic Micro Studio Camera 4K outputs 10-bit 4:2:2 1080p video

with 2 channels of audio for monitoring purposes. You can connect any HD capable HDMI

monitor, such as Blackmagic Video Assist, to frame and focus shots as well as navigating the

Micro Studio Camera 4K’s menus.

The frame rate of the HDMI output will match the format of the camera. For example, if the

camera is set to 2160p30, the HDMI output will be 1080p30.

When connected to an ATEM switcher, Blackmagic Micro Studio Camera 4K provides a two

stage tally indicator on a monitor connected via the camera’s HDMI output. The monitor

displays a green border when switched to the preview output of the switcher, and red when

switched to the program output.

Expansion Port

Blackmagic Micro Studio Camera 4K’s small size makes it easy to capture unique shots from

close to the action or difficult to reach spots. While your Micro Studio Camera 4K can be easily

tucked away out of sight, the same can’t always be said of a camera operator. So being able to

remotely control your camera is important to making full use of its tiny size.

You can adjust some settings on Micro Studio Camera 4K via SDI input with an ATEM Switcher,

as detailed in the section ‘Introducing Camera Control’ in this manual. However, the majority of

control options are provided by the expansion port.

Blackmagic Micro Studio Camera 4K’s DB-HD15 connector provides a wide range of connections,

including power, LANC remote, pan, tilt, zoom and genlock via the expansion cable included.

We encourage you to use a wide range of easily available cables to access specific features, or to

solder your own custom connections and adapt the Micro Studio Camera 4K to your needs. See the

‘Blackmagic Micro Studio Camera 4K Expansion Cable’ section in this manual for more information.

15Camera Connections

Blackmagic Micro StudioCamera4K – Right Side

Analog Audio In

The 3.5mm stereo audio connector accepts microphone or line level audio. You can switch

between these options in the camera’s ‘audio settings’ menu. It’s important to select the

appropriate setting or your audio may sound too quiet or too loud.

SDI Out

Use the SDI out connector to output 10-bit 4:2:2 video to professional SDI video equipment

such as routers, monitors, SDI capture devices and broadcast switchers. Blackmagic Micro

Studio Camera 4K supports 6G-SDI. You will need a DIN 1.0/2.3 to BNC adapter cable to

connect to devices with full size BNC connectors.

SDI In

Use the SDI in connector to control your Micro Studio Camera 4K via ATEM switchers. Refer to

the section ‘Introducing Camera Control’ for information about which controls are available.

TIP You can also control your Micro Studio Camera via a Blackmagic3G-SDI Shield for

Arduino. The shield embeds the same Blackmagic control data packets in the SDI

signal as you would get with an ATEM switcher. This means by connecting the program

return feed from any SDI switcher, through the shield to the SDI input on your camera,

you can access all the same Blackmagic camera controls you get with ATEM switchers.

Headphone / Talkback audio

The 3.5mm headphone / talkback input lets you talk to the control room with iPhone or Android

style headsets. Double press the play/pause button on your headset to enable talkback, and

press once to disable. Audio is embedded into channel 15 and 16 of the SDI signal output.

16Camera Connections

Customization

Blackmagic Micro Studio Camera 4K Expansion Cable

There are two ways to access the expansion port’s functions. You can use the expansion cable

that comes with your Micro Studio Camera 4K, or solder your own custom connectors.

The expansion cable provides connectors for the following control options.

Blackmagic Micro Studio Camera 4K expansion cable.

1 Power Input

The 12V power input connects via a DC jack and provides power to the Micro Studio

Camera 4K, as well as trickle charging any batteries attached. When mains power is

supplied, the camera will automatically turn on.

2 Reference Input

This allows multiple cameras to be genlocked to a blackburst or tri-level reference

signal. Genlocking cameras to an external reference signal helps to prevent timing errors

which may result in the picture jumping when switching between different cameras.

3 LANC

Connect wired LANC remote controllers to the 2.5mm jack for controlling functions like

zoom, iris adjustment, and focus from a tripod arm when using compatible lenses.

4 Pan Tilt Zoom

The RS-422 connector is used to relay pan tilt zoom commands received by

MicroStudio Camera 4K from its SDI input to a motorized head.

Refer to the ‘PTZ Control over SDI’ section for more information about PTZ control.

5 B4 Communication

The DB-9 connector allows you to power and control B4 broadcast lenses attached to

the Micro Studio Camera 4K via an MFT to B4 adapter. To control a compatible B4 lens,

simply connect the optional Digital B4 Control Adapter cable to the cable from the lens,

then connect the other end to the DB-9 serial connector on your expansion cable.

4

5

2

3

6

1

Micro Studio Cam MSC Breakout Cable

17Customization

You can adjust settings such as iris, focus and zoom in the same way you would an

active MFT lens, either via an ATEM switcher using the ‘camera control’ page, or via

other remote control interfaces that can be connected to the Micro Studio Camera 4K

expansion cable. For a list of supported B4 digital lenses, refer to the

Blackmagic Design support center at www.blackmagicdesign.com/support/faq/59011

6 S.Bus Digital Servo

By connecting to a compatible S.Bus receiver using the Futaba J cable, you have

17S.Bus remote channels where features of the camera can be assigned to and

remotely controlled. Channel 18 is reserved as a reset switch so that the camera can be

reset to its default exposure settings. These features can include focus, servo zoom, iris

control and other such features. For more information about mapping functions to S.Bus

remote channels, see the ‘Remote Settings’ section of this manual.

Wiring diagram for the Blackmagic

MicroStudio Camera 4K Expansion Cable

When using Blackmagic Micro Studio Camera 4K’s expansion port you may only want to access

one or two functions. For example, you may want to control an attached B4 Broadcast Lens

while simultaneously receiving 12V power and a reference signal. It’s easy to make a connector

that will give you just these functions without the clutter of additional, unused connectors.

Use the following diagram when wiring the expansion cable included or use it as an example for

how you can wire up the connections on your own custom cable correctly. The full range of

available pins are listed under group P1, while the subsets used for particular functions, as well as

their layout within the appropriate connectors, are shown in groups P2 through P7.

PIN ASSIGNMENT

1

2

3

1

2

3

4

5

6

7

8

9

1

2

3

4

5

OTHER

CENTER

SLEEVE

2

GROUND

12

8

GROUND

13

3

GROUND

14

15

GROUND

6

5

GROUND

6

GROUND

9

10

GROUND

TIP

RING

SLEEVE

1

2

3

4

5

6

7

8

9

1

2

3

4

5

6

7

8

9

P2

P3

P4

P5

P6

P7

P1

1 Ground

2 S. Bus

3 PTZ RS422 Tx-

4 Ground

5 Reference Input

* Power input to the camera is also used to power the lens. Beware of applying excessive voltages if you’re using

your own power supply to avoid damage to the lens.

6 Power +12V in

7 Ground

8 PTZ RS422 Tx+

9 LANC Data

10 LANC Power

11 Ground

12 PTZ RS422 Rx-

13 PTZ RS422 Rx+

14 B4 Lens Control Transmit

15 B4 Lens Control Receive

S. Bus

PTZ RS422 Rx-

PTZ RS422 Tx+

PTZ RS422 Rx+

PTZ RS422 Tx-

B4 Lens Control Transmit

B4 Lens Control Receive

Power +12V in*

Reference Input

LANC Data

LANC Power

Power +12V in

1

2

3

4

5

11

12

13

14

15

6

7

8

9

10

18Customization

Settings

You can change settings on your Blackmagic camera to get the best picture, such as video

format, shutter speed and white balance, plus you can adjust audio levels, monitoring settings,

and studio tally and talkback settings for effective communication with the control room.

This section of the manual contains detailed information on each of the settings in your camera.

Camera Settings

To configure the camera settings on your Blackmagic Studio Camera or Blackmagic Micro

Studio Camera 4K, press the ‘menu’ button. Use the menu navigation buttons to highlight items

and press the ‘set’ button to confirm your selection.

If you are using the Micro Studio Camera 4K, you will need to connect an external monitor via

the camera’s HDMI port to view menu settings.

Video Format

Select your desired video format using the navigation buttons. For example, to select between

1080p and 1080i formats, press the left or right arrow buttons to progress through the format

options. Press the ‘set’ button to confirm the format you want.

A list of supported video formats is provided later in this section.

Gain

Gain settings are helpful when you are shooting in low light conditions. The default setting on

Blackmagic Studio Camera is 0dB and gain can be increased in 6dB increments up to 18dB.

Gain settings on Blackmagic Micro Studio Camera 4K range from -12dB to +12dB and can be

increased in 6dB increments. The 0dB setting is the default setting with no gain added to

the picture.

Camera settings – Blackmagic Studio Camera Blackmagic Micro Studio Camera 4K

Detail

Use this setting to sharpen your image live from your Studio Camera. Decrease or increase the

level of sharpening by selecting ‘off’ or ‘default’ for low sharpening, ‘medium’ and ‘high’.

19Settings

Auto Exposure

Blackmagic Micro Studio Camera 4K gives you several auto exposure options.

Iris

Maintains a constant shutter speed while changing the aperture to achieve a

constantexposure.

Shutter

Maintains a constant aperture while changing the shutter speed to achieve a

constantexposure.

Iris + Shutter

Mantains the correct exposure levels by adjusting the aperture. If the maximum or

minimum available aperture is reached and exposure still cannot be maintained,

MicroStudio Camera 4K will begin adjusting the shutter speed to keep

exposureconstant.

Shutter + Iris

Maintains the correct exposure levels by adjusting the shutter speed. If the maximum or

minimum available shutter speed is reached and exposure still cannot be maintained,

MicroStudio Camera 4K will begin adjusting the aperture to keep exposure constant.

Manual Trigger

Iris aperture and shutter speed are set manually and exposure may vary with changing

light conditions.

White Balance

Eighteen white balance presets are selectable for a variety of color temperature conditions.

 2500, 2800, 3000, 3200, 3400, 3600, 4000, 4500 and 4800K for various conditions

under tungsten, incandescent or fluorescent light, or under dull natural light including

candle light, sunrise/sunset, morning, and after noon light.

 5000, 5200, 5400 and 5600K for outdoors on a clear, sunny day.

 6000, 6500, 7000, 7500 and 8000K for a variety of daylight conditions.

Shutter Speed

Shutter speed complements the gain setting by regulating the amount of light on the sensor.

There are 15 different shutter speeds available ranging from 1/50 sec to 1/2000 sec.

Blackmagic Studio Cameras Supported Video Formats

Blackmagic

Studio Camera

Blackmagic

Studio Camera 4K

Blackmagic Micro

Studio Camera 4K

720p50 720p50 720p50

720p59.94 720p59.94 720p59.94

720p60 720p60 720p60

1080i50 1080i50 1080i50

1080i59.94 1080i59.94 1080i59.94

1080i60 1080i60 1080i60

1080p23.98 1080p23.98 1080p23.98

1080p24 1080p24 1080p24

1080p25 1080p25 1080p25

1080p29.97 1080p29.97 1080p29.97

20Settings

Страница загружается...

Blackmagic Studio Camera Руководство пользователя

Похожие модели бренда

Модели других брендов