Hyundai H-CDM8034, H-CDM8034 Black Руководство пользователя

  • Привет! Я прочитал руководство по эксплуатации автомагнитолы Hyundai H-CDM8034. Я могу ответить на ваши вопросы о её функциях, установке и использовании. В руководстве подробно описаны возможности воспроизведения различных носителей, настройки звука, работа радиоприемника с RDS и многое другое. Задавайте свои вопросы!
  • Как включить/выключить устройство?
    Как настроить параметры звука?
    Как сохранить радиостанции?
    Как работает функция RDS?
    Что делать, если диск не читается?
CD/MP3-РЕСИВЕР
CD/MP3 RECEIVER
Руководство по эксплуатации Instruction manual
H-CDM8034
2 3
Table of contents Before you start
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.
11
11
11
11
11
11
12
12
12
12
12
12
12
13
13
13
13
13
13
13
14
14
14
14
14
15
16
Table of contents
Before you start
Utilization of the product
Important safeguards
Installation/Connection
Installation
General notes
Din Front/Rear-Mount
1. DIN front-mount (Method A)
Dismantling the unit
Trim frame installation
2. DIN rear-mount (Method B)
Detachable control panel
Anti-theft system
Connection
Connection diagram
ISO Connection table
Operation
Control elements
Front panel
Inner panel
Remote controller
Changing the battery
Use of Remote Control
LCD layout
General operations
Reset the unit
Power on/off
Volume control
Setting the sound parameters
Setting other features
Sound mute
Mode select
Display
AUX in jack
Radio operations
Band select
Auto/Manual tuning
Programming tuner stations
2
3
3
3
4
4
4
4
4
4
5
5
5
5
6
6
6
7
7
7
7
8
8
8
9
10
10
10
10
10
10
10
10
10
10
11
11
11
11
Automatic store/preset scan
Mono/Stereo control
Local/distant reception mode
RDS function
AF (Alternative Frequencies) function
TA (Traffic Alarm) function
PTY (Program Type)
REG control
Other parameter setting
Disc/USB/SD operations
USB/SD notes
Inserting an SD card/USB device
Insert/Eject disc
Play/pause
Fast forward/rewind
Scanning tracks
Repeat
Random playback
Previous/next track
MP3 track search
General information
Handling compact discs
Cleaning discs
Cleaning the unit body
Accessories
Troubleshooting guide
Specification
2 3
Table of contents Before you start
If you want to dispose this product, do not mix it with general household waste. There is
a separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling.
Please contact your local authorities for the correct method of disposal. By doing so, you
will ensure that your disposed product undergoes the necessary treatment, recovery and
recycling and thus prevent potential negative effects on the environment and human health.
Utilization of the product
Important safeguards
• Read carefully through the manual to
familiarize yourself with this unit.
• Keep this manual handy as a reference
for operating procedures and precautions. Do
not allow persons who have not read through
this manual to use this unit.
• “CLASS 1 LASER PRODUCT”
This product contains a laser diode of
higher class than 1. Laser beams from the
optical pickup are dangerous to the eyes. To
ensure continued safety, do not remove any
covers or attempt to gain access to the inside
of the product. Refer all servicing to qualified
personnel.
• Do not allow this unit to come into contact
with liquids. Electrical shock could result. Also,
damage to this unit, smoke, and overheating
could result from contact with liquids or dust.
Protect this unit from moisture.
• Make sure that foreign objects do not get
inside the unit; they may cause malfunctions,
or create safety hazards such as electrical
shock or laser beam exposure.
• The beginning of operation is the moment
of the unit installation. Before use the device
in winter it is recommended to heat up the
passenger compartment during 20 seconds or
to the operation temperature.
• Using the unit with the temperature that
goes beyond the operation temperature greatly
decreases the operation resource of the screen
and other components of the unit and can
result in an outage.
• Disconnect the vehicle’s negative battery
terminal while mounting and connecting the
unit.
• The unit is designed for negative
terminal of the battery, which is connected
to the vehicle metal. Please ensure it before
installation.
• When replacing the fuse, be sure to use
one with an identical amperage rating. Using a
fuse with a higher amperage rating may cause
serious damage to the unit.
• Do not allow the speaker wires to be
shorted together when the unit is switched
on. Otherwise it may overload or burn out the
power amplifier.
• Make sure you disconnect the power supply
and aerial if you will not be using the system
for a long period or during a thunderstorm.
• Make sure you disconnect the power supply
if the system appears to be working incorrectly,
is making an unusual sound, has a strange
smell, has smoke emitting from it or liquids
have got inside it. Let a qualified technician
check the system.
• Always keep the volume low enough so that
you can hear sounds from outside the vehicle.
• Should this product fail to operate properly,
contact your dealer or nearest service center.
4
Installation/Connection
Installation
General notes
• Choose the mounting location where the
unit will not interfere with the normal driving
function of the driver.
• Before finally installing the unit, connect
the wiring and make sure that the unit works
properly.
• Consult with your nearest dealer if
installation requires the drilling of holes or other
modifications of the vehicle.
• Install the unit where it does not get in the
driver’s way and cannot injure the passenger if
there is a sudden stop, like an emergency stop.
• If installation angle exceeds 30° from
horizontal, the unit may not perform properly.
• Avoid installing the unit where it would
be subject to high temperature, such as from
direct sunlight, or from hot air, from the heater,
or where it would be subject to dust, dirt or
excessive vibration.
Din Front/Rear-Mount
This unit can be properly installed either
from ‘Front’ (conventional DIN Front-mount) or
‘Rear’ (DIN Rear-mount installation, utilizing
threaded screw Holes at the sides of the unit
chassis). For details, refer to the following
illustrated installation methods.
1. DIN front-mount (Method A)
1. Car dashboard
2. Sleeve
3. Screw
4. Nut (5 mm)
5. Spring washer
6. Screw (5 х 25 mm)
7. Metal strap
8. Flat washer
3
2
1
182
53
1. Install the sleeve into the dashboard;
ensure it is installed with the correct side and
there are no obstacles (wires, dashboard
elements, etc) for the unit installation.
2. After installing the sleeve into the
dashboard, bend tabs fitting to the size of the
dashboard to fix the sleeve in place.
3. Use the metal strap to fix the rear side of
the unit. Determine a place for fixing and install
the strap as shown in the picture. You can bend
the strap to the needed angle with your hands.
4. Make the necessary wire connections.
Ensure the connections are correct.
5. Install the unit into the sleeve until the side
locks are fixed.
3
5
4
6
8
1
7
Dismantling the unit
a – Trim frame
5
Installation/Connections
b – Frame uninstall direction
c – Release key insertion
c
b
а
1. Switch off the unit and detach the front
panel.
2. Insert your fingers into the groove in the
front side of the trim frame (apply some effort to
detach the frame). Pull the frame to detach it.
3. Insert the supplied release keys into the
both sides of the unit body to click, as shown
in the picture. To extract the unit from the
dashboard, pull the release keys or the unit
body to pull it out. Before detaching the unit,
ensure it is not fixed with the metal strap.
Trim frame installation
To install the trim frame, press it to the unit
body and push it to fix it in place. This should
be done before installing the front panel;
otherwise you are not able to install the trim
frame. When the trim frame being installed,
the side with the groove should face down and
fixed first.
2. DIN rear-mount (Method B)
For this method, use the screw holes in the
lateral sides of the unit. Fix the unit with the
help of the factory radio mounting brackets.
1. Select a position in which the screw holes
of the brackets (3) are aligned with the screw
holes in the unit body, and screw in two screws
(2) in each side.
2. Screw.
3. Factory radio mounting brackets.
4. Vehicle dashboard.
5. Lock (remove this part).
The outer trim frame and mounting
sleeve are not used for method of installation.
2
2
5
5
4
3
Detachable control panel
Insert the left locker of the body into the fixing
hole on the left side of the panel, then insert the
right locker into the right hole of the panel. Press
on the upper part of the panel until a click.
To detach the front panel, press OPEN
button. Push the panel to the right to detach
the left locker. Then detach the right locker.
The control panel can easily be
damaged by shocks. After removing it, place
it in a protective case and be careful not to
drop it or subject it to strong shocks. The rear
connector that connects the main unit and the
control panel is an extremely important part. Be
careful not to damage it by pressing on it with
fingernails, pens, screwdrivers, etc.
If the control panel is dirty, wipe off the
dirt with soft, dry cloth only. And use a cotton
swab soaked in isopropyl alcohol to clean the
socket on the back of the control panel.
Anti-theft system
The front panel of this unit can be stored in
the included protective case when not in used
and carried away when you leave the vehicle
to deter theft.
Switch off the power of the unit. Detach the
front panel, then put it to the protective case
and take it with you.
6
Installation/Connection
Connection
Connection diagram
Line-out left (White)
Connector A
1. -
2. -
3. -
4. Memory +12V
5. Auto antenna output
6. -
7. +12V (to ignition key)
8. Ground
Connector B
1. Rear right speaker (+)
2. Rear right speaker (-)
3. Front right speaker (+)
4. Front right speaker (-)
5. Front left speaker (+)
6. Front left speaker (-)
7. Rear left speaker (+)
8. Rear left speaker (-)
ISO connector
Fuse
Line-out right (Red)
Antenna jack
ISO Connection table
Location Function
Connector A Connector B
1 - Rear right (+) - Purple
2 - Rear right (-) - Purple/Black
3 - Front right (+) - Grey
4 Battery +12V/Yellow Front right (-) - Grey/Black
5 Power antenna/Blue Front left (+) - White
6 - Front left (-) - White/Black
7 Ignition/Red Rear left (+) - Green
8 Ground/Black Rear left (-) - Green/Black
Power antenna wire is intended for power supply of the antenna and for remote control of
an additional amplifier.
7
Operation
Control elements
Front panel
1. MODE button
2. PWR button
3. VOL knob
4. DIS button
5. PTY button
6. Display
7. IR sensor
8. OPEN button
9. MUTE button
10. TA button
11. AF button
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
12. 1/PAUSE button
13. 2/RPT button
14. 3/INT button
15. 4/RDM button
16. 5/-10 button
17. 6/+10 button
18. AS/PS button
19. BAND button
20. button
21. button
22. AUX in jack
23. USB port
Inner panel
1 2 3 4 5
1. SD memory card slot
2. EJECT button
3. Panel status indicator
4. RESET button (hole)
5. Disc slot
Pressing RESET hole will erase the
clock setting and stored stations.
Panel status indicator lights up when you
slide the panel down, flashes when you remove
the panel.
8 9
Operation Operation
Remote controller
1
2
3
4
5
6
7
8
9
10
11
12
13
1. MODE button
2. MUTE button
3. Number buttons
4. BAND button
5. / buttons
6. V-/V+ buttons
7. PWR button
8. DIS button
9. TA/TP button
10. PTY button
11. AF/REG button
12. AS/PS button
13. SEL button
Changing the battery
Press the catch and at the same time pull
out the battery tray. Insert the 1 x lithium
battery, type CR 2025 3V battery with the
stamped (+) mark facing upward. Insert the
battery tray into the remote control.
Use of Remote Controller
• Use the remote control within 7 meters
from the IR sensor of the unit, and keep it
within +/-30° angle.
• Always keep the battery out of the reach
of children. Children may swallow it.
• If the remote control will not be in use for
a month, it is recommended that you remove
the battery.
• Do not disassemble or heat the battery.
• Do not dispose of battery into any fire
source.
8 9
Operation Operation
LCD layout
21 3 4 5 6 7 8 9 10 11
12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
1. Equalizer graphic indicator
2. Intro playback indicator
3. Repeat playback indicator
4. Random playback indicator
5. Digit display
6. Stereo signal reception indicator
7. Loudness indicator
8. Local reception indicator
9. Not active for this model
10. Not active for this model
11. Mute indicator
12. Disc playback indicator
13. USB connection indicator
14. TA function indicator
15. Memory card connection indicator
16. PTY function indicator
17. Not active for this model
18. AF function indicator
19. EON function indicator
20. Not active for this model
21. TP function indicator
22. WMA playback indicator
23. FLAT equalizer mode indicator
24. CLAS equalizer mode indicator
25. MP3 playback indicator
26. ROCK equalizer mode indicator
27. POP equalizer mode indicator
28. Not active for this model
10
Operation
General operations
Reset the unit
Operating the unit for the first time or after
replacing the car battery, you must reset the
unit.
Press OPEN button on the panel to open the
panel and press RESET button to restore the
unit to its original factory settings.
Power on/off
Press any button (except OPEN) to turn on
the unit. Press and hold PWR button to switch
the unit off.
After the unit is off, radio current
settings will be memorized, and when you turn
the unit on it will resume the stored status you
previously set.
Volume control
Rotate VOL knob on the panel or press V+/V-
buttons on the RC to adjust the volume level.
Setting the sound parameters
Press repeatedly VOL knob on the panel
or SEL button on the RC to select an audio
setting: VOL (volume) => BAS (bass) => TRE
(treble) => BAL (balance) => FAD (fader).
Rotate VOL knob on the panel or press V+/-
buttons on the RC to adjust each setting.
• If the unit is turned off, all the settings
of each mode will be saved.
• If cutting off battery power or resetting the
unit, all the settings will return to factory default
settings.
• When DSP is set to any mode, Balance
and Treble are not adjustable.
• If you don’t adjust the setting within
several seconds after selecting the desired
setting, the unit will automatically return to the
current mode being displayed.
Setting other features
Press and hold VOL knob on the panel or
SEL button on the RC, and then shortly press
this knob/button repeatedly to select a setting.
Rotate VOL knob on the panel or press V+/-
buttons on the RC to adjust each setting.
INVOL: Set default volume level when the
unit is turned on.
CLOCK: you can set the clock. Rotate VOL
knob clockwise to set minutes; rotate VOL
knob counterclockwise to set hours.
24 HOUR: choose 24 hour clock display
mode or 12 hour clock display mode.
LOUD ON/OFF: Enable LOUD ON (Default
is LOUD OFF).
BEEP ON/OFF: if BEEP on, pressing any
key will make a beep sound.
DSP: Choose intended sound effect in the
sequence: POP => ROCK => CLASS => FLAT
=> NONE.
Sound mute
Press MUTE button to turn the sound off.
Press it again or rotate VOL knob on the panel or
press V+/- buttons on the RC to resume sound.
Mode select
Press MODE button repeatedly to select:
TUNER => CD => SD => USB => AUX.
CD, SD and USB modes are only
available if corresponding media device is in
the unit.
Display
Press DIS button repeatedly to see current
tuning information and time. Sequence of the
menu: Clock => PTY => PS => Radio frequency.
AUX in jack
AUX-in jack is intended for connecting an
external audio or video equipment to amplify
the sound. If connection is made correctly, the
audio signal from the external source will be
translated through the acoustics of the head
unit. This enables to adjust the volume and
quality of the sounding. For example, you can
connect an MP3-player to listen to tracks using
the car acoustic system.
11
Operation
Radio operations
Band select
Press repeatedly BAND button to select
needed radio band in RADIO mode: FM1, FM2,
FM3 (OIRT), AM1 (MW1), AM2 (MW2). In each
set of the bands you can store up to 6 preset
stations, making total 30 preset memory stations.
Auto/Manual tuning
Auto tuning: Press or button on the
panel or on the RC. The radio will seek to the
nearest up or down strong and clear frequency
station. Repeat this action to seek for other
desired stations. While seeking, to stop auto
tuning press
or button.
Manual tuning: Press and hold
/
buttons on the panel or on the RC until
MANUAL is displayed. Then press repeatedly
/ buttons to change the frequency step
by step.
Programming tuner stations
There are 6 numbered preset buttons, under
which you can store and recall stations for each
band. Select the needed station, then press
and hold a number button. The station will be
saved in the memory under the corresponding
number. To recall a stored station, press the
corresponding number button.
Automatic store/preset scan
Automatic store: press and hold AS/PS
button on the panel or on the RC. The radio will
automatically store the 6 strongest available
stations to the 6 preset memories of the 3 FM
bands or the 2 AM bands (depending on which
one is current). To stop auto store, press this
button again.
Preset scan: Press AS/PS button on the
panel or on the RC, the receiver will scan the
saved stations in the current band.
Mono/Stereo control
Press and hold SEL button on the RC or VOL
knob on the panel; then press it repeatedly until
the display shows MONO OFF (MONO ON).
Turn VOL knob or press V+/- buttons on the
RC to switch between ON (mono reception) or
OFF (stereo reception).
Improvement of reception of distant stations
can be done by selecting mono mode, which
may cut down some reception noise.
Local/Distant reception modes
Press and hold SEL button on the RC or VOL
knob on the panel; then press it repeatedly until
the display shows LOC OFF (LOC ON). Turn
VOL knob or press V+/- buttons on the RC to
switch between ON (local station reception) or
OFF (distant and local station reception).
RDS function
RDS (Radio Data System) service availability
varies with areas. Please understand if RDS
service is not available in you area, the following
service is not available either.
AF (Alternative Frequencies) function
Press AF button on the panel or AF/REG
button on the RC to turn the AF function on or off.
When the radio signal strength is poor,
enabling the AF function will allow the unit to
automatically search another station with the
same PI (Program Identification) as the current
station but with stronger signal strength, so that
you do not have to retune the stations when
driving between different transmitter coverage
areas. When AF symbol is on, it means RDS
information is received; when AF symbol is
flashing, it means RDS information is not yet
received.
TA (Traffic Alarm) function
Press TA button on the panel or TA/TP
button on the RC to turn TA function on or off.
• When TA function is activated, it will search
the station with TA information automatically.
If there is no TA information, it will search the
station with TP information automatically, if
there is no TP information either, it will return to
the previous station after searching.
• When receiving the station with TP
12 13
Operation Operation
information but without TA information,
TP icon is on and TA icon keeps blinking;
when receiving the station with TP and TA
information, both TP and TA icons are on.
• When playing in other mode and TA
information is received, it will change to the
radio mode automatically. After playing over,
it will return to the previous mode. Press TA or
TA/TP button once to ignore the received TA
information, press the button twice to turn off
the function.
PTY (Program Type)
This radio will allow you to select the type of
program required, and will search for a station
broadcasting that type of program.
Press PTY to turn on PTY function. Press
and hold this button to open the program type
list. Rotate VOL knob on the panel or press
V+/- buttons on the RC to select a program
type. After selecting the type, press PTY button
to start search.
During one loop, if desired PTY is not found,
the unit will show NOT FND. Press PTY button
again to stop the search and switch the PTY
function off.
REG (Regional) function
Press and hold AF button on the panel or
AF/REG button on the RC to select REG on or
off. Default setting is off for REG.
When REG is enabled (on), the receiver
accepts regional variants of the tuned station
with REG icon turned on.
When REG is disabled (off), the receiver
ignores regional variants.
Other parameter setting
• Press and hold SEL button on the RC or
VOL knob on the panel; then press it repeatedly
until the display shows TA VOL. Rotate VOL
knob or press V+/- buttons on the RC to set the
default volume level for TA broadcasting.
• Press and hold SEL button on the RC or
VOL knob on the panel; then press it repeatedly
until the display shows EON ON (OFF). Rotate
VOL knob or press V+/- buttons on the RC to
switch EON on or off.
This unit is equipped with the latest
technology of EON (Enhanced Other Networks)
control, so that when you are listening to Radio
or CD, if there is any travel announcemnet from
a nearby local station, the radio will already
know the frequency of that radio station. Then
it will receive the station, turn up the volume,
or interrupt the playback of the music for the
duration of the announcement. At the end of
the announcement the radio will return to its
previous state ready for the next announcement.
Disc/USB/SD operations
USB/SD notes
USB format supports 2.0. Capacity: up to 8
GB.
For correct and satisfactory operation,
licensed SD memory cards of famous brands
should be used with this unit. Avoid using
memory cards of unknown brands. Capacity:
up to 8 Gb.
Inserting SD card/USB device
Insert an MMC card or a USB device into
MMC slot (on the inner panel) or USB socket
(behind the rubber cover). Then the playing
mode will be changed into SD or USB mode
automatically. The first card/USB device track
playback will start.
When MMC card and USB device are
both inserted into their compartment or socket,
the playing mode will be changed into the
mode of the later one.
Insert/eject discs
• Open the front panel and insert a disc into
the disc slot with label side up. Close the front
panel. The disc will be automatically loaded
into the unit, even when it is in radio mode. For
MP3 discs, the first file in the root folder will be
played. If an MP3 file has ID3 Tag information
in the supported ID3 format, such information
will be displayed on the LCD while playback.
12 13
Operation Operation
• Open the front panel and press EJECT
button to eject the disc from the slot. If the disc
is not removed from the slot within several
seconds, it will be automatically loaded into
the slot again. When the disc is ejected and
removed, the unit will automatically switch to
radio mode.
Play/pause
To ensure good system performance,
wait until the unit finishes reading the disc
information before proceeding. Press 1/PAUSE
button to pause the disc playback. Press this
button again to resume playback.
Fast Forward/rewind
Press and hold button on the panel
or on the RC to fast forward. Press and hold
button on the panel or on the RC to fast
reverse. Release the button when the desired
location is found.
Scanning tracks
Press 3/INT button to play the first 10
seconds of each track. Press this button again
to cancel intro playback playback.
Repeat
Press 2/RPT button to repeat the same track
continuously. Press this button again to stop
repeating.
Random playback
Press 4/RDM button to play all the tracks in
random order. Press the button again to stop
random play.
Previous/next track
Press / buttons on the panel or on the
RC to go to the previous or next track. Press
5/-10 and 6/+10 buttons to advance to 10
tracks down or up.
MP3 track search
The search modes only works with MP3
discs, USB and memory cards with MP3 files.
Cancel random, repeat and intro features
before searching.
• File Number Search
Press AS/PS button once to enter file number
search; 000 is displayed meaning the unit is
ready to accept file number for search. Rotate
VOL knob or press V+/- buttons on the RC
to input the third digit (from 1 to 9) of file you
want to listen to. Press VOL knob on the panel
or SEL button on the RC to go to next digit
selection. After completing input, press BAND
button to play the selected track.
• File Name Search
Press AS/PS button twice; A** is displayed
with the first character blinking. Rotate VOL
knob or press V+/- buttons on the RC to input
the first alphabet (from A to Z) or digit (from 0
to 9) of file name you want to listen to. Press
SEL button on the RC or VOL knob on the
panel to go to next digit. After completing input,
press BAND button to play.
If there is no file found, the unit will show NO
MATCH and return to initial input ready mode
automatically.
• Folder Search
Press AS/PS button 3 times, the first folder
name will be displayed. Rotate VOL knob or
press V+/- buttons on the RC to choose the
needed folder. Press BAND button to play the
first track in the selected folder.
If the device contains no folders, ROOT
will be displayed.
14
General information
Handling compact discs
• Do not insert anything other than a CD into
the CD loading slot.
• Do not use cracked, chipped, warped, or
otherwise damaged discs as they may cause
skipping or noise damage the player.
• Handle the disc only by the edges (as
shown in the picture). To keep discs clean do
not touch its surface.
• Store discs in their cases when not in use.
• Do not expose discs to direct sunlight,
high humidity, high temperature or dust.
• Prolonged exposure to extreme
temperature (such as leaving the discs in your
car during summertime) can wrap a disc.
• Do not attach labels, write on or apply
chemicals to the surface of the discs.
• Do not touch the recorded surface of the
discs.
• Use 12-cm CDs. Use only conventional,
fully circular discs. Do not use shaped discs.
Cleaning discs
Fingerprints should be carefully wiped from
the surface of disc with a soft cloth. Unlike
conventional records, compact discs have no
grooves to collect dust and macroscopic dirt,
so gently wiping them with a soft cloth should
remove must panicles. Wipe in a straight
motion from the center to the edge.
Never use thinner benzine, record cleaner
or anti static spray on a compact disc. Such
chemicals can damage its plastic surface.
Cleaning the unit body
Wipe with a soft cloth. If the cabinet is very
dampen (not dropping wet) the cloth with a
weak solution of soapy water, and then wipe
clean.
Accessories
1. Receiver
2. Front panel
3. Protective case
4. ISO cable set
5. Remote controller
6. Mounting parts:
Nut 5 mm
Spring washer
Plain washer
Rear bolt
Screw
Metal strap
Release key
Mounting sleeve
Trim frame
7. Instruction manual
8. Warranty card
9. Consumer information
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
4 pcs
1 pc
2 pcs
1 pc
1 pc
1 pc
1 pc
1 pc
15
General information
Troubleshooting
Below is a table describing simple measures that can help you eliminate most problems likely
to emerge when this unit is in use. If below measures do not help, turn to a service center or to the
nearest dealer.
Symptom Cause Solution
No power The car ignition is not on. If the power supply is properly connected
to the car accessory switch the ignition
key to “ACC”.
The fuse is blown. Replace the fuse.
No sound Volume is in minimum. Adjust volume to a desired level.
Wiring is not properly
connected.
Check wiring connection.
Bad sound quality The installation angle is more
than 30 degrees.
Adjust the installation angle to less than
30 degrees.
The disc is extremely dirty or
defective.
Clean the compact disc/try to play a new
one.
Disc cannot be
loaded or ejected
The unit already contains a
disc.
Remove the disc in the player then put a
new one.
Moisture condensation. Leave the unit idle for an hour, then retry.
Disc cannot be
read
The disc is inserted upside
down.
Insert the compact disc with the label
side facing upward.
Compact disc is extremely
dirty or defective.
Clean the disc or try to play a new one.
Temperature inside the car is
too high.
Cool off until the ambient temperature
returns to normal.
Buttons do not
work
The built-in microcomputer is
not operating properly.
Reset the unit with the help of RESET
button.
Front panel is not properly fix
into its place.
Install the front panel properly.
The radio does
not work
The antenna cable is not
connected.
Insert the antenna cable properly.
The radio station
automatic tuning
does not work
The signals are too weak. Select stations manually.
16
General information
Specifications
General
Power supply 12 V DC
Current consumption/Fuse 10 A
Maximum power output 4 x 50 W
Dimensions (L x W x H) 178 x 50 x 180 mm
Temperature range -20
0
C - +60
0
C
FM stereo radio
Frequency range 65.0 - 74.0/87.5 - 108.0 MHz
Presettable stations 18
Usable sensitivity 9 dBuV
MW Section
Frequency range 522 kHz-1620 kHz
Presetable stations 12
Usable sensitivity 30 dBuV
Disc player
System Compact disc audio system
Storage support CD/CD-R/CD-RW/USB/SD
Format support CDDA/MP3
Frequency characteristics 20 Hz - 20 kHz
ESP 40 sec. for CD/120 sec. for MP3
Mounting angle 0 - +/-30
0
Line out
Output: 2 channel RCA line-out (2V)
Specifications are subject to change without notice. Dimensions are approximate.
17
Содержание
Уважаемый покупатель!
Благодарим Вас за покупку нашего изделия. Чтобы понять, как правильно и безо-
пасно пользоваться Вашей моделью изделия, рекомендуется тщательно изучить на-
стоящее руководство перед подключением, регулировкой и эксплуатацией изделия.
Сохраняйте руководство для использования в будущем.
Содержание
Перед началом эксплуатации
Утилизация изделия
Меры предосторожности
Установка/Подключение
Установка
Общая информация
Установка устройства в приборную
панель
Установка в приборную панель
(Метод А)
Установка декоративной рамки
Установка в приборную панель
(Метод Б)
Операции со съемной панелью
Система против кражи
Подключение
Схема электрических соединений
Использование разъема ISO
Управление устройством
Элементы управления
Передняя панель
Внутренняя панель
Пульт дистанционного управления
(ПДУ)
Замена батареи в ПДУ
Использование ПДУ
Символы ЖК-дисплея
Основные операции
Перезапуск устройства
Включение/выключение устройства
Громкость
Регулирование параметров звука
Настройка других параметров
Отключение звука
Выбор источника сигнала
Отображение информации
17
19
19
19
21
21
21
21
21
22
22
23
23
24
24
24
25
25
25
25
26
26
26
27
28
28
28
28
28
28
28
28
29
29
29
29
29
29
29
29
29
30
30
30
30
30
31
31
31
31
31
31
31
32
32
32
32
32
33
33
33
33
Вход AUX
Операции с радио
Выбор диапазона радио
Поиск и настройка радиостанций
Сохранение настроенных станций
Автоматическое сохранение/
сканирование станций
Моно/стерео прием
Поиск местных/удаленных
радиостанций
Сервис RDS
Функция AF (альтернативные
частоты)
Функция TA (программы о дорожном
движении)
Функция PTY (тип программы)
Функция REG
Дополнительные функции
Воспроизведение дисков/USB
накопителей/карт памяти SD
Примечания по USB/SD
Установка USB/SD карты
Установка/извлечение диска
Воспроизведение/пауза
Ускоренное воспроизведение вперед
или назад
Функция Intro (обзорное
воспроизведение)
Повтор воспроизведения
Случайное воспроизведение
Переход к предыдущему/следующему
треку
Поиск треков МР3
Общая информация
Обращение с компакт-дисками
Чистка дисков
Чистка корпуса устройства
18
Содержание
Комплект поставки
Руководство по устранению
неисправностей
Технические характеристики
33
34
34
19
Перед началом эксплуатации
Если вы желаете утилизировать данное изделие, не выбрасывайте его вместе с
обычным бытовым мусором. Существует отдельная система сбора использованных
электронных изделий в соответствии с законодательством, которая предполагает
соответствующее обращение, возврат и переработку.
Обращайтесь в органы местного управления за инструкциями по правильной
утилизации продукта. Тем самым Вы обеспечите утилизацию Вашего изделия с
соблюдением обязательных процедур по обработке, утилизации и вторичной пере-
работке и, таким образом, предотвратите потенциальное негативное воздействие на
окружающую среду и здоровье людей.
Утилизация изделия
Меры предосторожности
• Внимательно изучите данное руковод-
ство, чтобы ознакомиться с устройством.
• Держите данное руководство под
рукой в качестве справочника по правилам
эксплуатации и мерам предосторожности.
Не допускайте к использованию устройства
посторонних лиц, не ознакомившихся и не
усвоивших данные инструкции по эксплуа-
тации.
• ЛАЗЕРНЫЙ ПРОДУКТ КЛАССА 1
Данное устройство оснащено лазерным
диодом класса выше 1. Лазерные лучи,
исходящие из блока оптической головки
считывания информации с компакт-диска,
опасны для глаз. В целях обеспечения пол-
ной безопасности не снимайте какие-либо
крышки и не пытайтесь проникнуть внутрь
устройства. Ремонт должен выполняться
только квалифицированным специалистом.
• Не допускайте попадания жидкости
на устройство. Это может повлечь пора-
жение электрическим током. Кроме того,
попадание жидкости или пыли в устройство
может стать причиной его выхода из строя,
перегрева и появления дыма. Оберегайте
устройство от воздействия влаги.
• Убедитесь, что внутрь устройства не
попали посторонние предметы. Они могут
вызвать сбои в работе или стать причиной
возгорания или поражения лазерным лучом.
• Началом эксплуатации устройства счи-
тается момент его установки в автомобиль.
Перед началом использования устройства
в зимний период рекомендуется прогреть
салон автомобиля в течение 20 минут или
до достижения эксплуатационного диапазо-
на температуры устройства.
• Использование устройства при темпе-
ратуре, выходящей за рамки эксплуатаци-
онного диапазона температур, значительно
снижает ресурс работы экрана и других
компонентов устройства и может привести
к выходу устройства из строя.
• При установке и подключении устрой-
ства отключите отрицательную клемму
аккумулятора автомобиля.
• Устройство разработано таким обра-
зом, чтобы отрицательный вывод аккумуля-
тора был подключен к корпусу транспортно-
го средства. Пожалуйста, убедитесь в этом
перед установкой.
• При замене предохранителя, убеди-
тесь, что вы устанавливаете предохра-
нитель с тем же номиналом. Используя
предохранитель с повышенным значением
тока, можно причинить значительные по-
вреждения устройству.
• Не позволяйте проводам динамиков
20 21
Перед началом эксплуатации Установка/Подключение
соприкасаться друг с другом или с корпу-
сом автомобиля после включения устрой-
ства. В противном случае усилитель может
быть перегружен или выйти из строя.
• Убедитесь, что источник питания и
антенна отключены, если Вы не будете
пользоваться устройством в течение дли-
тельного времени или во время грозы.
• Убедитесь, что источник питания от-
ключен, если обнаружена неправильная
работа устройства, устройство издает неха-
рактерные звуки, запах, выделяет дым или
внутрь его попала жидкость. В этих случаях
необходим квалифицированный техниче-
ский осмотр устройства.
• Не устанавливайте уровень громкости,
заглушающий внешние звуки дорожной
обстановки и сигналы специального авто-
транспорта.
• При неполадках в работе устройства
свяжитесь с торговым представителем или
с ближайшим сервисным пунктом.
/