Hyundai H-CDM8042 Руководство пользователя

Бренд: Hyundai

Модель: H-CDM8042

Категория: Мультимедиа-приемники для автомобилей

Тип: Руководство пользователя

Это руководство также подходит для

H-CDM8042 New Black

CD/MP3/WMA-РЕСИВЕРCD/MP3/WMA RECEIVER

Руководство по эксплуатации Instruction manual

H-CDM8042

2 3

Table of contents Before you start

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read

this manual carefully before connecting, operating and/or adjusting the product and keep

the manual for reference in the future.

Table of contents

Before you start

Utilization of the product

Important safeguards

Installation/Connection

Installation

General notes

Din Front/Rear-Mount

1. DIN front-mount (Method A)

Dismantling the unit

Trim frame installation

2. DIN rear-mount (Method B)

Detachable control panel

Anti-theft system

Connection

Connection diagram

ISO connection table

Operation

Control elements

Front panel

Inner panel

LCD layout

General operations

Turning on/off

Volume control

Mute function

Audio parameter setting

Beep

Loudness

Mode setting

AUX in jack

Radio operations

Band selection

Automatic tuning

Auto memory store

Preset scan

RDS function

AF (Alternative Frequencies)

function

TA (Traffic Alarm)/TP function

PTY (Program Type)

Other parameter setting

REG (Regional) functon

Mono/stereo control

Local radio statino search

Other parameter setting

Disc/USB/SD/MMC operations

USB/SD/MMC notes

Insert/Eject disc

Inserting an SD/MMC card/

USB device

Stopping playback

Previous/net track

Fast forward/rewind

Playback modes

File/folder search

Notes on MP3 and WMA

Notes on creating your own CD-Rs

or CD-RWs containing MP3 files

General information

Handling compact discs

Cleaning discs

Cleaning the unit body

Accessories

Troubleshooting guide

Specification

2 3

Table of contents Before you start

If you want to dispose this product, do not mix it with general household waste. There is

a separate collection system for used electronic products in accordance with legislation

that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so, you

will ensure that your disposed product undergoes the necessary treatment, recovery and

recycling and thus prevent potential negative effects on the environment and human health.

Utilization of the product

Important safeguards

• Read carefully through the manual to

familiarize yourself with this unit.

• Keep this manual handy as a reference

for operating procedures and precautions. Do

not allow persons who have not read through

this manual to use this unit.

• “CLASS 1 LASER PRODUCT”

This product contains a laser diode of

higher class than 1. Laser beams from the

optical pickup are dangerous to the eyes. To

ensure continued safety, do not remove any

covers or attempt to gain access to the inside

of the product. Refer all servicing to qualified

personnel.

• Do not allow this unit to come into contact

with liquids. Electrical shock could result. Also,

damage to this unit, smoke, and overheating

could result from contact with liquids or dust.

Protect this unit from moisture.

• Make sure that foreign objects do not get

inside the unit; they may cause malfunctions,

or create safety hazards such as electrical

shock or laser beam exposure.

• The beginning of operation is the moment

of the unit installation. Before use the device

in winter it is recommended to heat up the

passenger compartment during 20 seconds or

to the operation temperature.

• Using the unit with the temperature that

goes beyond the operation temperature greatly

decreases the operation resource of the screen

and other components of the unit and can

result in an outage.

• Disconnect the vehicle’s negative battery

terminal while mounting and connecting the

unit.

• The unit is designed for negative

terminal of the battery, which is connected

to the vehicle metal. Please ensure it before

installation.

• When replacing the fuse, be sure to use

one with an identical amperage rating. Using a

fuse with a higher amperage rating may cause

serious damage to the unit.

• Do not allow the speaker wires to be

shorted together when the unit is switched

on. Otherwise it may overload or burn out the

power amplifier.

• Make sure you disconnect the power supply

and aerial if you will not be using the system

for a long period or during a thunderstorm.

• Make sure you disconnect the power supply

if the system appears to be working incorrectly,

is making an unusual sound, has a strange

smell, has smoke emitting from it or liquids

have got inside it. Let a qualified technician

check the system.

• Always keep the volume low enough so that

you can hear sounds from outside the vehicle.

• Should this product fail to operate properly,

contact your dealer or nearest service center.

Installation/Connection

Installation

General notes

• Choose the mounting location where the

unit will not interfere with the normal driving

function of the driver.

• Before finally installing the unit, connect

the wiring and make sure that the unit works

properly.

• Consult with your nearest dealer if

installation requires the drilling of holes or other

modifications of the vehicle.

• Install the unit where it does not get in the

driver’s way and cannot injure the passenger if

there is a sudden stop, like an emergency stop.

• If installation angle exceeds 30° from

horizontal, the unit may not perform properly.

• Avoid installing the unit where it would

be subject to high temperature, such as from

direct sunlight, or from hot air, from the heater,

or where it would be subject to dust, dirt or

excessive vibration.

Din Front/Rear-Mount

This unit can be properly installed either

from ‘Front’ (conventional DIN Front-mount) or

‘Rear’ (DIN Rear-mount installation, utilizing

threaded screw Holes at the sides of the unit

chassis). For details, refer to the following

illustrated installation methods.

1. DIN front-mount (Method A)

1. Car dashboard

2. Sleeve

3. Screw

4. Nut (5 mm)

5. Spring washer

6. Screw (5 х 25 mm)

7. Metal strap

8. Flat washer

182

1. Install the sleeve into the dashboard;

ensure it is installed with the correct side and

there are no obstacles (wires, dashboard

elements, etc) for the unit installation.

2. After installing the sleeve into the

dashboard, bend tabs fitting to the size of the

dashboard to fix the sleeve in place.

3. Use the metal strap to fix the rear side of

the unit. Determine a place for fixing and install

the strap as shown in the picture. You can bend

the strap to the needed angle with your hands.

4. Make the necessary wire connections.

Ensure the connections are correct.

5. Install the unit into the sleeve until the side

locks are fixed.

Dismantling the unit

a – Trim frame

b – Frame uninstall direction

c – Release key insertion

Installation/Connection

1. Switch off the unit and detach the front

panel.

2. Insert your fingers into the groove in the

front side of the trim frame (apply some effort to

detach the frame). Pull the frame to detach it.

3. Insert the supplied release keys into the

both sides of the unit body to click, as shown

in the picture. To extract the unit from the

dashboard, pull the release keys or the unit

body to pull it out. Before detaching the unit,

ensure it is not fixed with the metal strap.

Trim frame installation

To install the trim frame, press it to the unit

body and push it to fix it in place. This should

be done before installing the front panel;

otherwise you are not able to install the trim

frame. When the trim frame being installed,

the side with the groove should face down and

fixed first.

2. DIN rear-mount (Method B)

For this method, use the screw holes in the

lateral sides of the unit. Fix the unit with the

help of the factory radio mounting brackets.

1. Select a position in which the screw holes

of the brackets (3) are aligned with the screw

holes in the unit body, and screw in two screws

(2) in each side.

2. Screw.

3. Factory radio mounting brackets.

4. Vehicle dashboard.

5. Lock (remove this part).

The outer trim frame and mounting

sleeve are not used for method of installation.

Detachable control panel

Insert the left locker of the body into the fixing

hole on the side of the panel, then insert the

right locker into the right hole of the panel. Press

on the upper part of the panel until a click.

To detach the front panel, press OPEN

button. Hold the panel at 45 degree angle and

push it to the left to detach the right locker.

Then detach the left locker.

The control panel can easily be

damaged by shocks. After removing it, place

it in a protective case and be careful not to

drop it or subject it to strong shocks. The rear

connector that connects the main unit and the

control panel is an extremely important part. Be

careful not to damage it by pressing on it with

fingernails, pens, screwdrivers, etc.

If the control panel is dirty, wipe off the

dirt with soft, dry cloth only. And use a cotton

swab soaked in isopropyl alcohol to clean the

socket on the back of the control panel.

Anti-theft system

The front panel of this unit can be stored in

the included protective case when not in used

and carried away when you leave the vehicle

to deter theft.

Switch off the power of the unit. Detach the

front panel, then put it to the protective case

and take it with you.

Installation/Connection

Connection

Connection diagram

Line-out left (White)

Connector A

1. -

2. -

3. -

4. Memory +12V

5. Auto antenna output

6. To dimmer control

7. +12V (to ignition key)

8. Ground

Connector B

1. Rear right speaker (+)

2. Rear right speaker (-)

3. Front right speaker (+)

4. Front right speaker (-)

5. Front left speaker (+)

6. Front left speaker (-)

7. Rear left speaker (+)

8. Rear left speaker (-)

ISO connector

Fuse

Line-out right (Red)

Antenna jack

ISO connection table

Location

Connector A

Battery 12V (+)/yellow

Power Antenna/Blue

Dimmer/Orange

ACC+/Red

Ground/Black

Connector B

Rear Right(+)---Violet

Rear Right(-)---Violet/Black Stripe

Front Right(+)---Grey

Front Right(-)---Grey/Black Stripe

Front Left(+)---White

Front Left((-)---White/Black Stripe

Rear Left(+)---Green

Rear Left(-)---Green/Black Stripe

Function

Power antenna wire is intended for power supply of the antenna and for remote control of

an additional amplifier.

Operation

Control elements

Front panel

1. PWR/MUTE button

2. MODE button

3. VOLUME knob

4. button

5. Display

6. MEM button

1 2 3 4 5 6 7 8

13 12 11 10 9

7. OK button

8. OPEN button

9. USB slot

10. AUX in jack

11. button

12. BAND button

13. SEL button

Inner panel

1 2 3 54

1. SD/MMC memory card slot

2. EJECT button

3. Panel status indicator

4. RESET button (hole)

5. Disc slot

Pressing RESET hole will erase the

clock setting and stored stations.

Panel status indicator lights up when you

slide the panel down, flashes when you remove

the panel.

8 9

Operation Operation

LCD layout

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

1. WMA playback indicator

2. TA function indicator

3. Digit display

4. TP function indicator

5. Equalizer graphic indicator

6. Not active

7. Disc playback indicator

8. PTY function indicator

9. Intro playback indicator

10. EON function indicator

11. Repeat playback indicator

12. AF function indicator

13. Random playback indicator

14. Mute function indicator

15. Preset station number

16. Stereo reception indicator

17. Local reception indicator

18. Active equalizer mode indicator

19. MP3 playback indicator

20. USB connection indicator

21. Memory card connection indicator

22. Not active

23. Not active

24. Subwoofer indicator (not active)

25. CD playback indicator

26. Not active

27. Not active

28. Loudness indicator

8 9

Operation Operation

General operations

Turning on/off

Press any button (except OPEN button) to

turn on the unit. Press and hold PWR/MUTE

button to switch the unit off.

After the unit is off, the volume level

and radio current settings will be memorized,

and when you turn the unit on it will resume

the stored status you previously set. To protect

your ear from too loud sound, the unit volume

level will turn to 50 automatically when you

turn the unit on if currect volume level setting is

above 50 when your turn the unit off.

Volume control

Rotate VOLUME knob to adjust the volume

level.

Mute function

Press PWR/MUTE button to turn the sound

off. Press it again to turn the sound on.

Audio parameter setting

Press repeatedly SEL button to select the

audio settings: VOLUME => BASS => TREBLE

=> BALANCE => FADER=> DSP. Rotate

VOLUME knob to adjust each setting.

For DSP: Choose DSP OFF => FLAT =>

CLASSICS => POP => ROCK => DSP OFF.

If the unit is turned off, all the settings of

each mode will be saved. If cutting off battery

power or resetting the unit, all the settings will

return to factory default settings.

Beep

Press and hold SEL button to select BEEP

ON; rotate VOLUME knob to toggle between

BEEP ON (beep sound will be heard when

buttons are pressed) and BEEP OFF.

Loudness

Press and hold SEL button, then press it

repeatedly to select LOUD ON (LOUD OFF).

Rotate VOLUME knob to select between

LOUD ON/LOUD OFF. LOUD function is to

emphasize the bass output; the word LOUD

ON indicates that the LOUD mode is on.

Mode setting

Press MODE button to select between unit

operation modes: TUNER => CD => SD =>

USB => AUX.

USB, CARD, DISC modes will only

show on the display when a USB device,

memory card or a disc is inserted into the unit.

AUX jack

AUX-in jack is intended for connecting an

external audio or video equipment to amplify

the sound. If connection is made correctly, the

audio signal from the external source will be

translated through the acoustics of the head

unit. This enables to adjust the volume and

quality of the sounding. For example, you can

connect an MP3-player to listen to tracks using

the car acoustic system.

Radio operations

Band selection

Press repeatedly BAND button to select your

desired radio band during RADIO mode: FM1,

FM2, FM3, AM1 (M1), AM2 (M2). In each set of

the bands you can store up to 6 preset stations,

making total 30 preset memory stations.

Automatic tuning

To find a station, select a band first, then

press and hold

/ buttons, the automatic

downward/upward search will start. It will play

when a station is found.

Programming preset stations

• To store a station: Select a band (if

needed); find a station by automatic tuning.

Then press MEM button and rotate VOLUME

knob to choose a memory position (1-6), and

finally press OK button to confirm.

• To recall a station: press repeatedly

Operation

TA (Travel Announcement) / TP

(Travel Program Identification)

Enable or disable TA mode by pressing and

holding BAND button. Default setting is OFF.

When TA function is activated, it will search

the station with TA information automatically.

If there is no TA information, it will search the

station with TP information automatically, if

there is no TP information either, it will return to

the previous station after searching.

When receiving the station with TP

information but without TA information,

TP icon is on and TA icon keeps blinking;

when receiving the station with TP and TA

information, both TP and TA icons are on.

When playing in other mode and TA

information is received, it will change to the

radio mode automatically. After playing over, it

will return to the previous mode.

PTY (Program Type) (for FM radio)

Press and hold MEM button to open PTY

program type list, and turn VOLUME knob to

select a PTY type. After selecting the program

type you want, press MEM button to search.

Press the button again to stop the PTY search.

If PTY code is different or not available, then

display blinks with “PTY NONE”.

REG (Regional) function

Press and hold SEL button, then press it

repeatedly to select REG, then rotate VOLUME

knob to set this function on/off. Default setting

is off for REG.

When REG is enabled (on), the receiver

accepts regional variants of the tuned station

with REG icon turned on.

When REG is disabled (off), the receiver

ignores regional variants.

Mono/Stereo control (in FM radio

mode)

Press and hold SEL button, then press it

repeatedly until the display shows STEREO

(MONO). Turn VOLUME knob to switch

between ON (stereo reception) or OFF (mono

buttons until the needed station is found.

Auto memory store

Select a band, press and hold OK button

to enter auto store mode. The radio will

automatically store 6 stations to the 6 preset

memories of the current band. To stop auto

store, press this button again.

During auto station preset, the unit will

search and store stations with the strong signal

first, and then weaker signal stations until the

memories are full.

Preset scan

Select a band, press OK button to scan all

preset stations in the memories of the current

band, each preset scan for 5 seconds. To stop

preset scan, press the button again.

RDS function

RDS (Radio Data System) service availability

varies with areas. Please understand if RDS

service is not available in you area, the following

service is not available, either.

AF (Alternative Frequencies)

function

Press and hold SEL button, then press it

repeatedly to select AF. Rotate VOLUME knob

to set this function on/off. If the AF function is

on, the display will show “AF”.

When the radio signal strength is poor,

enabling the AF function will allow the unit to

automatically search another station with the

same PI (Program Identification) as the current

station but with stronger signal strength, so that

you do not have to retune the stations when

driving between different transmitter coverage

areas. When AF symbol is on, it means RDS

information is received; when AF symbol is

flashing, it means RDS information is not yet

received. If RDS service is not available in your

area, turn off the AF mode.

Operation

reception). Improvement of reception of distant

stations can be done by selecting mono mode,

which may cut down some reception noise.

Local radio station search

Press and hold SEL button, then press it

repeatedly until the display shows LOCAL

(DISTANT). When the LOCAL function is on, the

local stations (stations with weak radio signal)

can be played. When the DISTANT function is

on, both local and distant stations (stations with

strong radio signal) can be played.

Setting other features

Press and hold SEL button, then press

it repeatedly until the display shows one of

these settings: MASK DPI => EON TA => TA

VOL. Rotate VOLUME knob to adjust each

setting, and press OK button to confirm the

adjustment.

MASK DPI: During MASK DPI mode, the

unit will mask only the AF which has different

PI, this is the default mode; during MASK ALL

mode, the unit will mask the AF which has

different PI and no RDS signal with high field

strength.

EON TA: Choose EON TA DX/LO. If you

want to receive information from local stations

only, select EON TA LO mode. Otherwise,

select EON TA DX mode.

TA VOL: Adjust the volume for TA

announcement.

Disc/USB/SD/MMC operations

USB/SD/MMC notes

USB functions (flash memory type) MP3

music play.

SD/MMC card support, 2in1 (SD/MMC)

support.

USB flash memory.

FAT 12/ FAT 16/ FAT 32 is possible

• FAT 12/16 (dir: 200 support, file: 500

support),

• FAT 32 (dir: 200 support, file: 500 support).

• Filename: 32 byte/ Dir name: 32 byte.

• Tag (id3tag ver2.0).

• Title/ Artist/ Album: 32 byte support.

Multi card reader not support. USB 2.0

support.

USB format supports 2.0. Capacity: up

to 4 Gb.

For correct and satisfactory operation,

licensed SD/MMC memory cards of famous

brands should be used with this unit. Avoid using

memory cards of unknown brands. Capacity: up

to 4 Gb.

Loading/Ejecting a disc

Open the front panel and insert a disc into

the disc slot with label side up. The disc will be

automatically loaded into the unit. The first file

in the root folder will be played.

Open the front panel and press EJECT

button to eject the disc from the slot. If the disc

is not removed from the slot within several

seconds, it will be automatically loaded into

the slot again. When the disc is ejected and

removed, the unit will automatically switch to

another mode.

Inserting the SD/MMC card/USB

device

Open the front panel and insert an SD/

MMC memory card into the card slot. Open the

USB slot cover on the front panel and insert a

USB into the USB slot. Then the playing mode

will be changed into MMC/SD or USB mode

automatically. The first card/USB device track

playback will start.

When SD/MMC card and USB device are

both inserted, the playing mode will be changed

into the mode of the device inserted later.

Stopping playback

The unit will automatically play from the first

sound track recorded on a disc/SD/

MMC /USB device. To ensure good system

performance, wait until the unit finishes reading

the disc /device information before proceeding.

To stop playback, press MODE button and

12 13

Operation Operation

select a different mode. When you go back to

disc/USB/card playback mode, the playback

will continue from the point it was stopped on.

Playing the previous/next track

During playback press button to play the

previous track. Press

button to play the

next track.

Fast forward/rewind

Press and hold / buttons to select

fast forward/backward playing. Release the

button when the needed playback point of the

track is reached.

When fast backward/forward playback

reaches the previous or next track, the unit will

resume normal playback.

Playback modes

Press and hold SEL button, then press it

until FUNC is displayed. Rotate VOLUME knob

to select SCAN/REPEAT/RANDOM/FUNC OFF

and press OK button to confirm.

Scan: playing the first several seconds of

each track.

Repeat: repeating the same track

continuously.

Random: playing all the tracks in random

order.

File/Folder Search Function (for MP3/

WMA files)

The search modes only work with MP3/WMA

discs and USB/SD/MMC with MP3/WMA files.

• File Number Search

Press MEM button once to enter file number

search; symbol * blinks in middle of the display

meaning the unit is ready to accept file number

for search. Rotate VOLUME knob to input a digit

(from 1 to total file number in the storage) of

file you want to listen to. After completing input,

press BAND button to play.

• File Name Search

Press MEM button twice; symbol * blinks on

left side of the display. Rotate VOLUME knob

to input the first alphabet (from A to Z) or digit

(from 0 to 9) of file you want to listen to. Press

SEL button to go to next digit. After completing

input, press BAND button to play.

If there is no file found, the unit will return to

initial input ready mode automatically.

• Folder Search

Press MEM button 3 times, “ROOT” will be

displayed. Rotate VOLUME knob to choose

between folders and subfolders.

The total number of folders on a disc/

USB/memory card should not exceed 10.

Notes on MP3 and WMA

• MP3 is short for MPEG Audio Layer 3

and refers to an audio compression technology

standard.

• This product allows playback of MP3 files

on CD-ROM, CD-R or CD-RW discs.

• The unit can read MP3 files written in the

format compliant with ISO 9660. However it

does not support the MP3 data written by the

method of packet write.

• The unit can not read an MP3 file that has

a file extension other than “.mp3”.

• If you play a non- MP3 file that has the

“.mp3” extension, you may hear some noise.

• In this manual, we refer to what are called

“MP3 file” and “folder” in PC terminology as

“track” and “album”, respectively.

• Maximum number of directory level is 8,

including the root directory. Maximum number of

files and folders per disc is 256.

• The unit may not play tracks in the order

of Track numbers.

• The unit plays only the audio tracks if a

disc contains both audio tracks and MP3 files.

• When playing a disc of 8 kbps or “VBR”,

the elapsed playing time in the display window

will not be correct and also the intro play may

not function properly. “VBR”: Variable Bit Rate.

• The unit supports the playback of WMA

files. The playback of ID3 tags for WMA format

is not guaranteed, it depends on versions and

availability of Cyrillic alphabet.

• WMA (Windows Media Audio) – music

data compression format, created by Microsoft

Corporation. This format uses coding algorithm

12 13

Operation Operation

for compression of initial audio-record, greatly

decreasing the file size, but, saving the good

sound quality even when the bit rate is low (for

example, 64 Kbit/s).

• Remember that the unit may not play the

tracks in order they are written on disc.

Notes on creating your own CD-Rs

or CD-RWs containing MP3 files

• To enjoy high quality sound, we

recommend converting to MP3 files with a

sampling frequency of 44.1 kHz and a fixed bit

rate o f 128 kbps.

• Do not store more than 256 MP3 files per

disc.

• For ISO 9660 - compliant format, the

maximum allowable depth of nested folders is

8, including the root directory (folder).

• When CD-R disc is used, playback is

possible only for discs, which have been

finalized.

• Make sure that when MP3 CD-R or CD-

RW is burned that it is formatted as a data disc

and not as an audio disc.

• You should not write non-MP3 files or

unneeded folders along with MP3 files on the

disc otherwise it takes a long time until the unit

starts to play MP3 files.

• With some CD-R or CD-RW media, data

may not be properly written depending on their

manufacturing quality. In this case, data may

not be reproduced correctly. High quality CD-R

or CD-RW disc is recommended.

• Up to 16 characters are displayed for the

name of an Album or a Track. ID3TAG version

1.x is required.

• Note that the unit may not play tracks in

the order that you wrote them to the disc.

General information

Handling compact discs

• Do not insert anything other than a CD into

the CD loading slot.

• Do not use cracked, chipped, warped, or

otherwise damaged discs as they may cause

skipping or noise damage the player.

• Handle the disc only by the edges (as

shown in the picture). To keep discs clean do

not touch its surface.

• Store discs in their cases when not in use.

• Do not expose discs to direct sunlight,

high humidity, high temperature or dust.

• Prolonged exposure to extreme

temperature (such as leaving the discs in your

car during summertime) can wrap a disc.

• Do not attach labels, write on or apply

chemicals to the surface of the discs.

• Do not touch the recorded surface of the

discs.

• Use 12-cm CDs. Use only conventional,

fully circular discs. Do not use shaped discs.

Cleaning discs

Fingerprints should be carefully wiped from

the surface of disc with a soft cloth. Unlike

conventional records, compact discs have no

grooves to collect dust and macroscopic dirt,

so gently wiping them with a soft cloth should

remove must panicles. Wipe in a straight

motion from the center to the edge.

Never use thinner benzine, record cleaner

or anti static spray on a compact disc. Such

chemicals can damage its plastic surface.

Cleaning the unit body

Wipe with a soft cloth. If the cabinet is very

dampen (not dropping wet) the cloth with a

weak solution of soapy water, and then wipe

clean.

Accessories

1. Receiver

2. Front panel

3. Protective case

4. ISO adaptor set

5. Mounting parts:

Nut 5 mm

Spring washer

Plain washer

Bolt

Screw

Metal strap

Release key

Mounting collar

Trim frame

Rubber cushion

6. Instruction manual

7. Warranty card

8. Consumer information

1 pc

1 pcs

4 pcs

1 pc

2 pcs

1 pc

General information

Troubleshooting

Below is a table describing simple measures that can help you eliminate most problems likely

to emerge when this unit is in use. If below measures do not help, turn to a service center or to the

nearest dealer.

Symptom Cause Solution

No power The car ignition is not on. If the power supply is properly connected

to the car accessory switch the ignition

key to “ACC”.

The fuse is blown. Replace the fuse.

No sound Volume is in minimum. Adjust volume to a desired level.

Wiring is not properly

connected.

Check wiring connection.

Bad sound quality The installation angle is more

than 30 degrees.

Adjust the installation angle to less than

30 degrees.

The disc is extremely dirty or

defective.

Clean the compact disc/try to play a new

one.

Disc cannot be

loaded or ejected

The unit already contains a

disc.

Remove the disc in the player then put a

new one.

Moisture condensation. Leave the unit idle for an hour, then retry.

Disc cannot be

read

The disc is inserted upside

down.

Insert the compact disc with the label

side facing upward.

Compact disc is extremely

dirty or defective.

Clean the disc or try to play a new one.

Temperature inside the car is

too high.

Cool off until the ambient temperature

returns to normal.

Buttons do not

work

The built-in microcomputer is

not operating properly.

Reset the unit with the help of RESET

button.

Front panel is not properly fix

into its place.

Install the front panel properly.

The radio does

not work

The antenna cable is not

connected.

Insert the antenna cable properly.

The radio station

automatic tuning

does not work

The signals are too weak. Select stations manually.

General information

The display

shows an

error message

(ERROR 1 – 11)

one time.

Possible disc error. Reset the unit by pressing RESET hole.

Ensure the disc is inserted correctly into

the slot.

Clean or change the disc.

The display

shows an

error message

(ERROR 1 – 11)

repeatedly.

Unit operation error. Turn to a service center.

Specifications

General

Power supply 12 V DC

Current consumption max. 10 A

Maximum power output 50 W x 4 channels

Fuse 10A

Dimensions (L x W x H) 178 x 50 x 165 mm

Temperature range -20

C - +60

FM stereo radio

Frequency range 65.0 - 74.0/87.5 - 108.0 MHz

Presettable stations 18

Usable sensitivity 8 uV

MW Section

Frequency range 522 kHz-1620 kHz

Presetable stations 12

Usable sensitivity 30 dB

Disc player

System Compact disc audio system

Medium support CD/CD-R/CD-RW/USB/SD/MMC

Format support CDDA/MP3/WMA

Frequency characteristics 20 Hz - 20 kHz

ESP 40 sec. for CD/ 120 sec. for MP3/300

sec. for WMA

Mounting angle 0 - +/-30

Line out

Output: 2 channel RCA line-out (2V)

Specifications are subject to change without notice. Dimensions are approximate.

Содержание

Уважаемый покупатель!

Благодарим Вас за покупку нашего изделия. Чтобы понять, как правильно и безо-

пасно пользоваться Вашей моделью изделия, рекомендуется тщательно изучить на-

стоящее руководство перед подключением, регулировкой и эксплуатацией изделия.

Сохраняйте руководство для использования в будущем.

Содержание

Перед началом эксплуатации

Утилизация изделия

Меры предосторожности

Установка/Подключение

Установка

Общая информация

Установка устройства в приборную

панель

Установка в приборную панель

(Метод А)

Установка декоративной рамки

Установка в приборную панель

(Метод Б)

Операции со съемной панелью

Система против кражи

Подключение

Схема электрических соединений

Таблица проводов ISO-коннектора

Управление устройством

Элементы управления

Передняя панель

Внутренняя панель

Символы ЖК-дисплея

Основные операции

Включение/выключение устройства

Регулирование громкости

Приглушение звука

Настройка параметров звука

Функция BEEP

Тонкомпенсация

Режимы работы устройства

Вход AUX

Операции с радио

Выбор диапазона радио

Автонастройка радиостанций

Сохранение и вызов станций

Автоматическое сохранение станций

Сканирование сохраненных станций

Сервис RDS

Функция AF (альтернативные

частоты)

Функция TA/ТР (программы о

дорожном движении)

Функция PTY (тип программы)

Функция REG

Поиск локальных радиостанций

Моно/стерео прием

Дополнительные функции

Воспроизведение дисков/USB

накопителей/карт памяти SD/MMC

Примечания по USB/SD/MMC

разъемам

Загрузка/извлечение диска

Загрузка USB/SD/MMC карты

Остановка воспроизведения

Следующий/предыдцщий трек

Ускоренная перемотка вперед или

Режимы воспроизведения

Поиск файла/папки

Примечания по МР3 и WMA

Примечание по созданию

собственных CD-R или CD-RW,

содержащих файлы MP3

Общая информация

Обращение с компакт-дисками

Чистка дисков

Чистка корпуса устройства

Комплект поставки

Руководство по устранению

неисправностей

Технические характеристики

Перед началом эксплуатации

Если вы желаете утилизировать данное изделие, не выбрасывайте его вместе с

обычным бытовым мусором. Существует отдельная система сбора использованных

электронных изделий в соответствии с законодательством, которая предполагает

соответствующее обращение, возврат и переработку.

Обращайтесь в органы местного управления за инструкциями по правильной

утилизации продукта. Тем самым Вы обеспечите утилизацию Вашего изделия с

соблюдением обязательных процедур по обработке, утилизации и вторичной пере-

работке и, таким образом, предотвратите потенциальное негативное воздействие на

окружающую среду и здоровье людей.

Утилизация изделия

Меры предосторожности

• Внимательно изучите данное руковод-

ство, чтобы ознакомиться с устройством.

• Держите данное руководство под

рукой в качестве справочника по правилам

эксплуатации и мерам предосторожности.

Не допускайте к использованию устройства

посторонних лиц, не ознакомившихся и не

усвоивших данные инструкции по эксплуа-

тации.

• ЛАЗЕРНЫЙ ПРОДУКТ КЛАССА 1

Данное устройство оснащено лазерным

диодом класса выше 1. Лазерные лучи,

исходящие из блока оптической головки

считывания информации с компакт-диска,

опасны для глаз. В целях обеспечения пол-

ной безопасности не снимайте какие-либо

крышки и не пытайтесь проникнуть внутрь

устройства. Ремонт должен выполняться

только квалифицированным специалистом.

• Не допускайте попадания жидкости

на устройство. Это может повлечь пора-

жение электрическим током. Кроме того,

попадание жидкости или пыли в устройство

может стать причиной его выхода из строя,

перегрева и появления дыма. Оберегайте

устройство от воздействия влаги.

• Убедитесь, что внутрь устройства не

попали посторонние предметы. Они могут

вызвать сбои в работе или стать причиной

возгорания или поражения лазерным лучом.

• Началом эксплуатации устройства счи-

тается момент его установки в автомобиль.

Перед началом использования устройства

в зимний период рекомендуется прогреть

салон автомобиля в течение 20 минут или

до достижения эксплуатационного диапазо-

на температуры устройства.

• Использование устройства при темпе-

ратуре, выходящей за рамки эксплуатаци-

онного диапазона температур, значительно

снижает ресурс работы экрана и других

компонентов устройства и может привести

к выходу устройства из строя.

• При установке и подключении устрой-

ства отключите отрицательную клемму

аккумулятора автомобиля.

• Устройство разработано таким обра-

зом, чтобы отрицательный вывод аккумуля-

тора был подключен к корпусу транспортно-

го средства. Пожалуйста, убедитесь в этом

перед установкой.

• При замене предохранителя, убеди-

тесь, что вы устанавливаете предохра-

нитель с тем же номиналом. Используя

предохранитель с повышенным значением

тока, можно причинить значительные по-

вреждения устройству.

• Не позволяйте проводам динамиков

Перед началом эксплуатации

соприкасаться друг с другом или с корпу-

сом автомобиля после включения устрой-

ства. В противном случае усилитель может

быть перегружен или выйти из строя.

• Убедитесь, что источник питания и

антенна отключены, если Вы не будете

пользоваться устройством в течение дли-

тельного времени или во время грозы.

• Убедитесь, что источник питания от-

ключен, если обнаружена неправильная

работа устройства, устройство издает неха-

рактерные звуки, запах, выделяет дым или

внутрь его попала жидкость. В этих случаях

необходим квалифицированный техниче-

ский осмотр устройства.

• Не устанавливайте уровень громкости,

заглушающий внешние звуки дорожной

обстановки и сигналы специального авто-

транспорта.

• При неполадках в работе устройства

свяжитесь с торговым представителем или

с ближайшим сервисным пунктом.

20 21

Установка/Подключение Установка/Подключение

Установка

Общая информация

• Перед окончательной установкой

устройства временно подключите все

провода и убедитесь, что все соединения

выполнены верно, а устройство и система

работают правильно.

• Для обеспечения правильной установ-

ки устройства используйте только те дета-

ли, которые входят в комплект. Использова-

ние других приспособлений может привести

к появлению сбоев в работе устройства.

• Если для установки устройства не-

обходимо сверлить отверстия в кузове

автомобиля или вносить какие-либо другие

изменения в его конструкцию, проконсуль-

тируйтесь с продавцом.

• Устанавливайте устройство там, где

оно не будет закрывать водителю обзор и

отвлекать его от дорожной обстановки и не

сможет нанести травм пассажирам в случае

внезапной остановки автомобиля, напри-

мер, при экстренном торможении.

• Если при установке устройства угол

относительно горизонтальной плоскости

превышает 30°, рабочие характеристики

проигрывателя могут быть не оптимальны.

• Никогда не устанавливайте устройство

в таких местах, где оно будет подвергаться

воздействию высокой температуры, напри-

мер, в местах попадания прямых солнечных

лучей, в местах выхода горячего воздуха от

отопителя автомобиля, в местах, где очень

грязно или пыльно, или там, где устройство

будет подвергаться сильной вибрации.

• Перед установкой устройства обяза-

тельно снимите переднюю панель.

Установка устройства в

приборную панель

Данное устройство может быть установ-

лено либо «спереди» (обычная установка

стандарта DIN в приборную панель автомо-

биля), либо «сзади» (установка стандарта

DIN, при которой используются отверстия

на боковых сторонах корпуса проигрыва-

теля, имеющие резьбу под винты). Более

подробно методы установки А и Б описыва-

ются ниже.

Установка в приборную панель

(Метод А)

Установка устройства

1. Приборная панель автомобиля

2. Монтажный кожух.

3. Винт

4. Гайка(5 мм)

5. Пружинная шайба

6. Винт (5 х 25 мм)

7. Опорная планка.

8. Плоская шайба

182

1. Установите монтажный кожух в при-

борную панель автомобиля, убедитесь, что

он установлен правильной стороной и нет

препятствий (провода, элементы приборной

панели) для установки магнитолы.

2. После установки монтажного кожу-

ха в приборную панель отогните на нем

металлические язычки, соответствующие

толщине приборной панели. Это позволит

закрепить кожух на месте.

3. Обязательно используйте опорную

планку для закрепления задней стороны

проигрывателя. Определите место крепле-

ния и установите ее согласно приведенному

рисунку. Планку можно согнуть руками под

нужным углом.

4. Подключите необходимые провода и

разъемы. Убедитесь в правильности под-

Страница загружается ...

Hyundai H-CDM8042 Руководство пользователя

Бренд: Hyundai

Модель: H-CDM8042

Категория: Мультимедиа-приемники для автомобилей

Тип: Руководство пользователя

Это руководство также подходит для

H-CDM8042 New Black

Скачать PDF

сообщить о нарушении

на других языках

English: Hyundai H-CDM8042 User manual

Hyundai H-CDM8042 Руководство пользователя

Это руководство также подходит для

Hyundai H-CDM8042 Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов