Varta V-AVM650D Руководство пользователя

  • Здравствуйте! Я прочитал руководство по эксплуатации для автомагнитолы VARTA V-AVM650D. В нем подробно описаны функции устройства, включая воспроизведение различных форматов медиафайлов, подключение Bluetooth, настройку радио и многое другое. Задавайте ваши вопросы – я готов помочь!
  • Как включить/выключить устройство?
    Как выбрать источник воспроизведения?
    Как настроить громкость?
    Как выполнить сопряжение с Bluetooth-устройством?
    Что делать, если устройство работает некорректно?
V-AVM650D
2 DIN MULTIMEDIA DVD RECEIVER WITH MOTORIZED 6.5” TFT DISPLAY, TV TUNER,
BLUETOOTH AND COMPATIBILITY TO GPS
2DIN МУЛЬТИМЕДИЙНЫЙ DVD-РЕСИВЕР С 6.5” МОТОРИЗОВАННЫМ TFT-
ДИСПЛЕЕМ, ТВ-ТЮНЕРОМ, ИНТЕРФЕЙСОМ BLUETOOTH И ВОЗМОЖНОСТЬЮ
РАБОТЫ С GPS-НАВИГАЦИЕЙ
Instruction manual Руководство по эксплуатации
V-AVM650D
2
Thank you for buying our product. It is recommended to read this manual all through to avoid any failures in its
work.
Contents
Contents........................................................................................................................................................................2
Important safeguards ....................................................................................................................................................4
Accessories and Hardware............................................................................................................................................5
Installation ....................................................................................................................................................................7
Controls ......................................................................................................................................................................13
Front panel..................................................................................................................................................................13
Inner panel ..................................................................................................................................................................13
Remote control ...........................................................................................................................................................14
Basic Operation ..........................................................................................................................................................16
Radio operations.........................................................................................................................................................19
RDS operations...........................................................................................................................................................21
DISC operations .........................................................................................................................................................23
USB/SD operations.....................................................................................................................................................33
Bluetooth operations...................................................................................................................................................36
TV Tuner operations...................................................................................................................................................43
Other modes................................................................................................................................................................45
Equalizer.....................................................................................................................................................................47
Setup ...........................................................................................................................................................................49
Handling discs ............................................................................................................................................................56
V-AVM650D
3
Troubleshooting Guide...............................................................................................................................................57
Specifications..............................................................................................................................................................58
V-AVM650D
4
Important safeguards
Using the device at temperature below -10º С may cause the breakage of the device. BEFORE USING
PLEASE HEAT UP THE PASSENGER COMPARTMENT TO THE RECOMMENDED TEMPERATURE!
Read carefully through this manual to familiarize yourself with this high-quality sound system.
Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.
When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher
amperage rating may cause serious damage to the unit.
DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.
Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create
safety hazards such as electrical shock or laser beam exposure.
If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes
normal before operating the unit.
DO NOT open covers and do not repair yourself. Consult the dealer or an experienced technician for help.
Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or
during a thunderstorm.
Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an
unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified
technician check the system.
The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please
confirm it before installation.
Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload
or burn out the power amplifier.
V-AVM650D
5
Accessories and Hardware
No. Item Diagram Quantity No. Item Diagram Quantity
1 DVD player
1 13
Bolt
M5.0x24.0
1
2 Assembly bar
1 14 Harness cable 1
1
3 Nut
4 15 Harness cable 2
1
4
Spring gasket 1
ø9.0xø5.2xT1.3
2 16 Harness cable 3
1
5
Spring gasket 2
ø7.3xø4.3xT1.1
1 17 Antenna
1
6
Spring gasket 3
ø8.3xø5.2xT1.4
1 18 Unit ring
1
7
Flat Gasket
ø8.0xø4.4xT1.0
1 19 Trim ring
1
8
Screw
M4.0x10.0
1 20 Remote control
1
9
Screw
M5.0x19.0
1 21 Glasses clothes
1
10
Screw
M5.0x7.0
2 22
Owners
manual
1
V-AVM650D
6
11
Screw
M5.0x9.0
6 23 Warranty Card
1
12 Extended box
1 24
Consumer
Information
1
V-AVM650D
7
Installation
Be sure to connect the color-coded leads according to the diagram. Incorrect connections may cause the unit
to malfunction or damage the vehicle’s electrical system.
Be sure to connect the speaker (-) leads to the speaker (-) terminal. Never connect the left and right channel
speaker cables to each other or to the vehicle body.
Make sure all the connections are completely correct before turning on your unit.
When replacing the fuse(s), the replacement must be of the same amperage as shown on the fuse holder.
Do not block vents or radiator panels. Blocking them will cause heat to build up inside and may result in fire.
After completing the installation, please press RESET button on the unit with pointed object (such as ball-
point pen) to set the unit to initial status.
Use only the parts included with unit to ensure proper installation. The use of unauthorized parts can cause
malfunction.
Consult with your nearest dealer if installation requires the drilling or other modifications of the vehicle.
Install the unit where it does not interfere with drivers actions and cannot injure the passenger if there is a
sudden stop, like an emergency stop.
The semiconductor laser will be damaged if it overheats, so don't install the unit in hot place, for example,
near a heater outlet.
V-AVM650D
8
Control cables connections
Auto Brightness Control
To avoid the display being too bright at night time, if the cable for headlight is connected to ILLUMI, turning
on the headlight dim the backlight of LCD and TFT and vice versa.
Telephone Mute
If the MUTE is connected, other audio outputs mute when a telephone call is received by the car phone.
When Reverse Driving
If a rear view camera is connected to the unit, the playing source switches to CAMERA automatically when
you start reverse driving. As the reverse driving is done, the playing source switches to the last mode.
When Parking Brake applied
o If "PRK SW" cable is connected to hand brake switch, the video view to the TFT monitor will be
controlled by this function. Parking cable function ceases when the playing source is CAMERA.
o The monitor displays the blue screen with warning information to prevent the driver watching other
contents during driving, but the passengers at the rear seats can watch normally.
TFT Monitor Protection
The unit will protect the movement mechanism automatically when the monitor's movement is blocked.
V-AVM650D
9
Installation Method A
If the meter panel of your car has a two-din dish, and the fireproofing board is capable of screw cap, you can
choose this method.
1. Screw a specialized M5 bolt to the screw at the empennage of this unit.
2. Screw down the fix-up iron bar with the fireproofing board.
3. Put the unit into the dash and screw down the M5 bolt with the fireproofing board.
V-AVM650D
10
Installation Method В
1. Choose a perfect position according to the depth of the dash; attach two brackets (for Left and Right side
respectively.) to the unit, using 4pcs of M5X6 screw to screw down the bracket with the unit.
2. Put the unit into the dash and screw down the bracket to the meter panel with suitable screw.
V-AVM650D
11
Wiring connection
V-AVM650D
12
Parking brake cable connections
Reverse driving cable connections
V-AVM650D
13
Controls
Front panel
1. TFT display
2. SRC/POWER button
3. MUTE/CALL button
4. VOL+/- button
5. REAR zone button
6. UP/DOWN/LEFT/RIGHT/ENTER cursor (joystick)
7. EQ button
8. WIDE/PIC button
9. DISP button
10. CH UP/DOWN button
11. BAND/LOC/DX button
12. PIP button
13. OPEN/TILT button
14. Auto Dimmer Sensor
15. RESET button
Inner panel
16. EJECT button
17. Disc loading slot.
18. SD card slot
V-AVM650D
14
Remote control
1. POWER button
2. SRC button
3. SETUP button
4. VOL+/- button
5. TITLE button
6. MUTE button
7. MENU button
8. AUDIO button
9. PRESET UP/DOWN button
10. BAND/ II (SLOW PLAYBACK) button
11. SLIDE UP/DOWN button
12. GOTO/CALL button
13. TILT UP/DOWN button
14. RPT/A-B button
15. RPT button
16. EJECT button
17. PIP button
18. UP/DOWN/LEFT/RIGHT/ENTER cursor (joystick)
19. FRONT/REAR switch
20. ANGLE button
21. SUBTITLE button
22. PIC button
23. WIDE button
24. STOP buttonя
25. DISP/CLEAR button
V-AVM650D
15
26. NUMBER buttons
27. RDM button
28. SCN button
Notes of remote control using:
1. Aim the remote control at the remote sensor of the unit.
2. Remove the battery from the remote control or insert a battery insulator if the battery has not been used for a
month or longer.
3. DO NOT store the remote control under direct sunlight or in high temperature environment, or it may not
function properly.
4. The battery can work for 6 months under normal condition. If the remote control doesn’t work, please change
the battery.
5. Use "button shaped" lithium battery "CR2025" (3V) only.
6. DO NOT recharge, disassemble, heat or expose the battery in fire.
7. Insert the battery in proper direction according to the (+) and (-) poles.
8. Store the battery in a place where children cannot reach to avoid a risk of accident.
Uninstall Battery
Slide out the battery compartment tray at the
bottom on the back of the remote control.
Install battery
Insert the battery to the battery tray with proper
direction according to the (+) and (-) poles.
V-AVM650D
16
Basic Operation
Turn on/off the power
Press SRC/POWER button on to unit or POWER button on the RC to turn the unit on.
Press and hold this button to turn the unit off.
Enter password
You need to enter password when you use this unit for the first time or after changing the car battery. You can try 6
times when your password is wrong and the unit will power off automatically after you have tried for 6 times.
*******
1 2 3
4 5 6
7 8 9
0
If you want to continue, turn your unit on and try to enter password again. The password is 012345 (lf this
password is not correct, please ask the dealer). The password is changeable (for more information see item
“Rating”).
Volume
Press VOL+/- on the unit or RC to increase/decrease the sound volume. The maximum level of volume is 40.
Mute
Press MUTE button on the unit or RC to turn the sound off. Press it again to resume.
V-AVM650D
17
Playing source selection
Open the “SOURCE MENU”, and then touch the option you need or select the option: FRONT, REAR, DISC, SD,
USB, NAV, RADIO, BT, TV, AUX 1, AUX 2, CAMERA, OFF by moving the cursor (joystick) and then confirm.
Note: When some devices are not ready, they cannot be selected.
Open/close the monitor
Press OPEN/TILT button on the unit or OPEN/CLOSE button on the RC to slide down/up the monitor.
Changing the monitor tilting angle
You can adjust the monitor angle to get more convenient position. Press and hold OPEN/TILT button and then
press CH UP/DOWN buttons repeatedly to change monitor angle. Also you can adjust the monitor angle by
pressing TILT UP/DOWN buttons.
Changing the display mode
Press WIDE button repeatedly the display modes will be changed as follows:
V-AVM650D
18
If the unit cannot work correctly, you should reset the unit by pressing the RESET button on the panel with a
pointed object, (such as a ballpoint pen).
Picture setup
Press and hold WIDE button the picture menu will appear. Adjust BRIGHT and CONTRAST (COLOR) items with
cursor buttons. Press WIDE button shortly to choose between BRIGHT and CONTRAST.
V-AVM650D
19
Radio operations
Select radio mode
Open the “Source Menu” and select “Radio”.
Select band
Press BAND/SLOW PLAYBACK button on the RC or BAND/LOC/DX button, or touch repeatedly the BAND
icon on the screen to select bands in the following order: FM1 – FM2 – FM3 – AM1 – AM2.
Search for a station automatically
To search for a station along the increasing frequencies press RIGHT cursor button on the RC or on the unit. To
search for a station along the decreasing frequencies press LEFT cursor button on the RC or on the unit.
Notes: To stop searching, repeat the operation above or press other buttons having radio function. When a station is
received, searching stops and the station is played. If the unit receives a stereo broadcasting, the indicator light of
Stereo “ST” on the display will be lighted.
Search for a station manually
To search for a station manually, press repeatedly UP/DOWN cursor button on the RC or on the unit, or touch the
numeric keypad icon and then touch the number buttons to input the radio station frequency numbers. During
manually searching, the frequency will be changed in steps.
Presetting stations automatically
Press ENTER cursor button on the RC or on the unit, or touch the AS icon on the screen. Only stations with
sufficient signal strength will be detected and stored in the memory.
Notes: To stop automatic presetting, press other buttons having radio functions. After automatic presetting, the
previous stations frequency will be overwritten. The unit has 5 bands, such as FM1, FM2, FM3, AM1, AM2, and
each band can store 6 stations; hence the unit can store 30 stations in all.
V-AVM650D
20
Presetting stations manually
Method 1: Press the number buttons on the RC.
Method 2: Press the MEM icon on the screen to open the station preset menu. Then press one of the 6 buttons of
the menu. The menu will be closed automatically. If you want to exit, press EXIT button.
Notes: After manual presetting, the previous stations frequency will be overwritten. Number buttons 1 to 6
corresponds to station P1 to P6. For each band, P1 to P6 can store 1 station.
Recall the preset stations
Press the corresponding number button on the RC or touch an onscreen preset button to select the corresponding
stored station.
Preview scan
Press SCN button on the RC or touch the PS icon on the screen. Preview scan searching is such a process that the
searching pauses when a station is received and then played for 10 seconds. After being played, the unit continues
the process until the whole band is detected.
Note: To stop preview scan, repeat the operation above again.
Local radio station searching
Press and hold BAND/LOC/DX button on the unit or press the LOC icon on the screen to open pr close LOCAL
function. DX (distance) seeking mode is contrary of LOC mode. You can receive more stations with this seeking
mode. When LOCAL seeking is on, only those radio stations with strong radio signal could be received.
Notes: When the local radio station searching is on, the indicator light “LOC” lights up; whereas the light goes off.
The unit will switch to distant seeking mode after LOCAL seeking is closed.
/