Hyundai H-CMD4001G Руководство пользователя

лчиттничюнльтцию.

глтчн.Бзвыдны

www.sotmarket.ru

дбняинфмциятв,

тзывы,бзыиы

Инструкция

Hyundai H-CMD4001G

Перейти в карточку товара

8 800 775 98 98

МУЛЬТИМЕДИЙНЫЙ

DVD/CD/MP3-РЕСИВЕР

СО ВСТРОЕННЫМ 4.3”TFT-

ДИСПЛЕЕМ И ТВ-ТЮНЕРОМ

MULTIMEDIA DVD/CD/MP3

RECEIVER WITH BUILT-IN 4.3”

TFT DISPLAY AND TV TUNER

Руководство по эксплуатации Instruction manual

H-CMD4001G

2 3

Table of contents Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read

this manual carefully before connecting, operating and/or adjusting the product and keep

the manual for reference in the future.

Table of contents

Before you start

Utilization of the product

Important safeguards

Installation/Connection

Installation

General notes

Din Front/Rear-Mount

1. DIN front-mount (Method A)

Dismantling the unit

Trim frame installation

2. DIN rear-mount (Method B)

Detachable control panel

Anti-theft system

Connection

Connection diagram

ISO connection table

Using the ISO connector

Parking wire connection

Reverse driving cable connection

Operation

Control elements

Front panel

Inner panel

Remote controller

Changing battery

General operations

Touch screen

Reset the unit

Power button

Monitor tilt angle

Volume control

Turning the sound off

Mode selection

Navigation (option)

On-screen display (OSD)

Setting the sound characteristics

AV in jack

Subwoofer

Dual zone function

2

4

5

6

7

8

9

10

11

12

System setup

Sound page

Display page

Date and Time page

RDS and Radio page

System page

Calibration page

Utilities

Calculator

Calendar

Radio operations

User interface of Radio mode

Band selection

Manual/automatic tuning

Programming tuner stations

Auto memory store/Preset scan

RDS function

AF (Alternative frequencies) function

TA (Traffic alarm) function

PTY (Program type) function

TV tuner operations

AV-IN mode

DIsc/USB/SD/MMC operations

USB/SD/MMC notes

Insert/Eject disc

Inserting an SD/MMC card/USB device

DVD touch interface

VCD touch interface

MP3/DivX/JPEG disc touch interface

Color setting

DVD setup

Play/pause

Stop playback

Selecting tracks

Fast forward/rewind

A-B segment repeat

Repeat playback

Intro playback

GOTO

Random playback

12

13

14

15

16

17

18

19

20

OSD (On Screen Display) function

Zooming in/out

PBC (Playback Control) (for VCD only)

Changing angle (for DVD only)

Selecting audio language (for DVD only)

Selecting subtitle language (for DVD)

Selecting sound channel (for VCD only)

Menu navigation (for DVD only)

ID3 Tag function

General information

Handling compact discs

Cleaning discs

Cleaning the unit body

Accessories

Troubleshooting guide

Specification

2 3

Table of contents Table of contents

20

21

22

23

24

4

Before your start

If you want to dispose this product, do not mix it with general household waste. There is

a separate collection system for used electronic products in accordance with legislation

that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so, you

will ensure that your disposed product undergoes the necessary treatment, recovery and

recycling and thus prevent potential negative effects on the environment and human health.

Utilization of the product

Important safeguards

• Read carefully through the manual to

familiarize yourself with this unit.

• Keep this manual handy as a reference

for operating procedures and precautions. Do

not allow persons who have not read through

this manual to use this unit.

• “CLASS 1 LASER PRODUCT”

This product contains a laser diode of

higher class than 1. Laser beams from the

optical pickup are dangerous to the eyes. To

ensure continued safety, do not remove any

covers or attempt to gain access to the inside

of the product. Refer all servicing to qualified

personnel.

• Do not allow this unit to come into contact

with liquids. Electrical shock could result. Also,

damage to this unit, smoke, and overheating

could result from contact with liquids or dust.

Protect this unit from moisture.

• Make sure that foreign objects do not get

inside the unit; they may cause malfunctions,

or create safety hazards such as electrical

shock or laser beam exposure.

• The beginning of operation is the moment

of the unit installation. Before use the device

in winter it is recommended to heat up the

passenger compartment during 20 seconds or

to the operation temperature.

• Using the unit with the temperature that

goes beyond the operation temperature greatly

decreases the operation resource of the screen

and other components of the unit and can

result in an outage.

• Disconnect the vehicle’s negative battery

terminal while mounting and connecting the

unit.

• The unit is designed for negative

terminal of the battery, which is connected

to the vehicle metal. Please ensure it before

installation.

• When replacing the fuse, be sure to use

one with an identical amperage rating. Using a

fuse with a higher amperage rating may cause

serious damage to the unit.

• Do not allow the speaker wires to be

shorted together when the unit is switched

on. Otherwise it may overload or burn out the

power amplifier.

• Make sure you disconnect the power supply

and aerial if you will not be using the system

for a long period or during a thunderstorm.

• Make sure you disconnect the power supply

if the system appears to be working incorrectly,

is making an unusual sound, has a strange

smell, has smoke emitting from it or liquids

have got inside it. Let a qualified technician

check the system.

• Always keep the volume low enough so that

you can hear sounds from outside the vehicle.

• Should this product fail to operate properly,

contact your dealer or nearest service center.

5

Installation/Connection

Installation

General notes

• Choose the mounting location where the

unit will not interfere with the normal driving

function of the driver.

• Before finally installing the unit, connect

the wiring and make sure that the unit works

properly.

• Consult with your nearest dealer if

installation requires the drilling of holes or other

modifications of the vehicle.

• Install the unit where it does not get in the

driver’s way and cannot injure the passenger if

there is a sudden stop, like an emergency stop.

• If installation angle exceeds 30° from

horizontal, the unit may not perform properly.

• Avoid installing the unit where it would

be subject to high temperature, such as from

direct sunlight, or from hot air, from the heater,

or where it would be subject to dust, dirt or

excessive vibration.

Din Front/Rear-Mount

This unit can be properly installed either

from ‘Front’ (conventional DIN Front-mount) or

‘Rear’ (DIN Rear-mount installation, utilizing

threaded screw Holes at the sides of the unit

chassis). For details, refer to the following

illustrated installation methods.

1. DIN front-mount (Method A)

1. Car dashboard

2. Sleeve

3. Screw

4. Nut (5 mm)

5. Spring washer

6. Screw (5 х 25 mm)

7. Metal strap

8. Flat washer

3

2

1

182

53

1. Install the sleeve into the dashboard;

ensure it is installed with the correct side and

there are no obstacles (wires, dashboard

elements, etc) for the unit installation.

2. After installing the sleeve into the

dashboard, bend tabs fitting to the size of the

dashboard to fix the sleeve in place.

3. Use the metal strap to fix the rear side of

the unit. Determine a place for fixing and install

the strap as shown in the picture. You can bend

the strap to the needed angle with your hands.

4. Make the necessary wire connections.

Ensure the connections are correct.

5. Install the unit into the sleeve until the side

locks are fixed.

3

5

4

6

8

1

7

Dismantling the unit

a – Trim frame

b – Frame uninstall direction

c – Release key insertion

6

Installation/Connection

в

б

а

1. Switch off the unit and detach the front

panel.

2. Insert your fingers into the groove in the

front side of the trim frame (apply some effort to

detach the frame). Pull the frame to detach it.

3. Insert the supplied release keys into the

both sides of the unit body to click, as shown

in the picture. To extract the unit from the

dashboard, pull the release keys or the unit

body to pull it out. Before detaching the unit,

ensure it is not fixed with the metal strap.

Trim frame installation

To install the trim frame, press it to the unit

body and push it to fix it in place. This should

be done before installing the front panel;

otherwise you are not able to install the trim

frame. When the trim frame being installed,

the side with the groove should face down and

fixed first.

2. DIN rear-mount (Method B)

For this method, use the screw holes in the

lateral sides of the unit. Fix the unit with the

help of the factory radio mounting brackets.

1. Select a position in which the screw holes

of the brackets (3) are aligned with the screw

holes in the unit body, and screw in two screws

(2) in each side.

2. Screw.

3. Factory radio mounting brackets.

4. Vehicle dashboard.

5. Lock (remove this part).

The outer trim frame and mounting

sleeve are not used for method of installation.

2

5

4

3

Detachable control panel

Insert the left lockers of the panel into the

fixing holes on the left side of the body, then

press on the right part of the panel until a click.

To detach the front panel, press OPEN

button. When it unfastens, carefully pull the

panel out.

The control panel can easily be

damaged by shocks. After removing it, place

it in a protective case and be careful not to

drop it or subject it to strong shocks. The rear

connector that connects the main unit and the

control panel is an extremely important part. Be

careful not to damage it by pressing on it with

fingernails, pens, screwdrivers, etc.

If the control panel is dirty, wipe off the

dirt with soft, dry cloth only. And use a cotton

swab soaked in isopropyl alcohol to clean the

socket on the back of the control panel.

Anti-theft system

The front panel of this unit can be stored in

the included protective case when not in used

and carried away when you leave the vehicle

to deter theft.

Switch off the power of the unit. Detach the

front panel, then put it to the protective case

and take it with you.

7

Installation/Connection

Connection

Connection diagram

ISO connection table

Location Function

Connector A Connector B

1 - Rear right (+) - Purple

2 - Rear right (-) - Purple/Black

3 - Front right (+) - Grey

4 Battery +12V/Yellow Front right (-) - Grey/Black

5 Power antenna/Blue Front left (+) - White

6 - Front left (-) - White/Black

7 Ignition key (+12V)/Red Rear left (+) - Green

8 Ground/Black Rear left (-) - Green/Black

Power antenna wire is intended for power supply of the antenna and for remote control of

an additional amplifier.

Video out (yellow)

Video in (yellow)

Audio out (red=right)

Audio in (red=right)

RCA AV out

RCA AV in

Audio out (white=left)

Audio in (white=left)

Radio antenna jack

Subwoofer out (blue)

TV antenna jack

Fuse 15 A

GPS antenna (option)

Parking (Brown)

Reverse (Pink)

RCA out (rear) grey

RCA out (front) brown

right (red)

left (white)

12

8 9

Installation/Connection Operation

Using the ISO Connector

1. If your car is equipped with the ISO

connector, then connect the ISO connectors as

illustrated.

1 2

2. For connections without the ISO

connectors, check the wiring in the vehicle

carefully before connecting, incorrect connection

may cause serious damage to this unit.

Cut the connector, connect the colored leads

of the power cord to the car battery as shown

in the colour code table above for speaker and

power cable connections.

Parking wire connection

Parking brake lead

Brake light

Car frame

Battery

Brown Wire

If Parking cable is connected to hand brake switch, the video display of the TFT monitor will be

controlled by driving status. When the car is moving ahead, if the video disc is played, the screen

shows warning and blank screen. The warning screen will prevent the driver from watching images.

Reverse driving cable connection

Car frame

Rear view video camera lead

Reverse driving light

Gearbox

Pink wire

Battery

If the rear view video camera is connected, the unit automatically switches to camera mode

during reverse driving. The unit returns to the original work mode after the reverse driving is done.

8 9

Installation/Connection Operation

Control elements

Front panel

1. EJECT button

2. VOL+/VOL- buttons

3. OK button

4. Display

5. Slot for Navigation memory card (not shown)

6. MODE button

7. 4/

button

8. 1/ button

9. IR sensor

10. 2/ button

11. OPEN button

1 2 3 4 5 6 7 8 9

10

1112

13

14

15

16

17

18 19 20 21 22 23 24 25 26

12. 3/ button

13. TUN+/TUN- buttons

14. 6/

button

15. 5/

button

16. BAND button

17. MENU button

18. AF/REG button

19. AMS button

20. POWER/MUTE button

21. TA/EON button

22. DUAL button

23. AV input

24. DSP button

25. USB port

26. MAP button

Inner panel

1 2 3 4

1. Disc slot (available when front panel is open)

2. RESET button (hole)

3. Panel status indicator (blinks when front

panel detached)

4. Memory card slot

10

Operation

Remote controller

1

2

3

4

5

6

7

8

9

10

16

17

18

19

20

21

22

23

24

25

26

27

28

30

29

31

11

12

13

14

15

1. MODE button

2. POWER button

3. UP cursor button

4. BND/RDM button

5. ENTER button

6. LEFT cursor button

7. DOWN cursor button

8. EJECT button

9. PTY button

10. P.SCN/RPT button

11. SEEK-/

button

12. AF/TA button

13. OSD button

14.

/PBC button

15. Digit buttons

16.

button

17. MUTE button

18. MENU button

19. SUB-T button

20. RIGHT cursor button

21. SETUP button

22. ANGLE button

23. INT button

24. VOL+ button

25. A-B/ZOOM button

26. SEL button

27. SEEK+/ button

28. VOL- button

29. AUDIO/GOTO button

30. TILT button

31. DUAL button

Changing the battery

1. Press the catch and at the same time pull

out the battery tray.

2. Insert the 1 lithium battery, type CR2025

(3 V) battery with the stamped (+) mark facing

upward. Insert the battery tray into the remote

controller.

• Store the battery where children

cannot reach. If a child accidentally swallows

the battery, consult a doctor immediately.

• Do not recharge, short, disassemble or

heat the battery or dispose it in a fire.

• Do not expose or bring into contact the

battery with other metallic materials. Doing this

may cause the battery to give off heat, crack or

start a fire.

• When throwing away or saving the battery,

wrap it in tape and insulate; otherwise, the

battery may give off heat, crack or start a fire.

• Please direct the Remote controller to the

IR sensor of the front panel.

11

Operation

- - -

In the menu, touch the item of the mode you

need to select the corresponding mode. Touch

the arrow icon in the right part of the screen to

switch between the 2 menu pages.

The DVD, USB and SD modes are only

available when a disc, USB or SD/MMC card is

inserted into the unit.

Navigation (option)

• To enable navigation mode, touch NAVI

button in the main menu. To enable or disable

NAVI mode you can also press MAP button on

the panel.

• Insert Navigation memory card into the

Memory card slot of the unit before enabling

navigation mode. The device will warn you if

the memory card is not properly inserted into

the card slot.

• For more details about operations with

navigation program, please read the instruction

manual to the navigation software. You can

download the quickstart guidance and full

instruction manual for the navigation program

from the web site of the navigation software

manufacturer.

On-screen display (OSD)

Press OSD button to show the current mode

General operations

Touch screen

Due to the touch screen, you can fulfill most

functions not only by pressing buttons but also

by touching the options you need.

Reset the unit

Operating the unit for the first time or after

replacing the car battery, you must reset the

unit. Press EJECT button and then press

RESET button (hole) under the panel to restore

the unit to the original factory settings.

Power button

Press any button (except OPEN button on

the panel) to turn on the unit. Press POWER

button on the RC or press and hold POWER/

MUTE button on the panel to turn off the unit.

Monitor tilt angle

Press TILT button to adjust monitor title

angle as follows: TILT1 => TILT2 => TILT3

=> TILT4 => TILT5 => TILT6 => TILT7. The

monitor will flip down accordingly.

Volume control

Press VOL+ button to increase the volume

level. Press VOL- button to decrease the

volume level.

Turning the sound off

When the power is on, press POWER/MUTE

button on the panel or MUTE button on the RC

to turn the sound off. Press it again or adjust

volume to turn the sound on.

Mode selection

• Repeatedly press MODE button on the RC

or on the panel to select an operation mode.

• In any mode press MENU button to display

the Main menu consisting of two pages:

12 13

Operation Operation

information on the display.

Setting the sound characteristics

Press SEL button to open the following menu:

1 2 3 4

1. Setting list. Touch a setting to select its

adjustment.

2. Adjustment buttons. Touch them to adjust

corresponding setting.

3. Page selection buttons. Touch to select a

menu page.

4. Return button. Touch to return to previous

menu level.

Following settings are available for

adjustment:

Page 1

• Equalizer: Select Flat, Classic, Pop, Rock

or DSP OFF equalizer mode.

• TA volume: Adjust the volume level for TA

radio service.

Page 2

• Bass: Adjust the low-frequency level.

• Treble: Adjust the high-frequency level.

• Balance: Adjust the balance between left

and right channels.

• Fader: Adjust the balance between front

and rear channels.

Page 3

• Beep: Select ALL (beep is heard at any

button pressing), 2ND (beep is heard when a

button is pressed and held) or OFF (no beep).

• Loud: Selecting loudness ON will

emphasize the low frequency output.

• Subwoofer: set the subwoofer on or off.

You can also press / buttons on

the RC to select menu pages; press UP/DOWN

cursor buttons to select a setting, press LEFT/

RIGHT buttons to adjust the setting.

AV in jack

AV jack is intended to receive audio and video

signals by connecting to external device.

Subwoofer

Connect a subwoofer to this unit using the

Subwoofer output of this unit. For subwoofer

operation an external amplifier is required.

Dual zone function

DUAL - dual zone function enabling user to

listen to radio or watch TV in the front zone,

and at the same time play audio or video from

disc, USB or memory card.

For Dual zone an external monitor with is

required having its own acoustic system and

possibility of volume adjustment.

Press DUAL button to select between

C-DUAL (buttons perform operations for the

current mode of the front zone) or D-DUAL

(buttons perform DVD functions).

System setup

When you select SETTING mode, the menu

will be displayed, in which you can touch any

item to select corresponding setting page:

After selecting a menu page you can

navigate in the menu by pressing cursor

buttons on the RC and confirm your selection

by pressing ENTER button on the RC. Menu

subpages are selected by pressing

/

buttons on the RC. Or touch the items on the

12 13

Operation Operation

screen to select them.

Sound page

Sound setting is described in details in

paragraph “Setting the sound characteristics“

above.

Display page

Page 1

• Brightness: adjust the display brightness.

• AV1: select REAR CAM or OTHER mode

(for more details see Rear Gear description

below).

• Rear gear: When REAR CAM is selected,

Rear Gear can switch between Enable and

Disable. When Enable is selected, the unit will

receive the picture from car rear view camera.

When Disable is selected, the unit will not receive

the picture from car rear view camera, and the

unit have AV-IN 2 Setting only. In OTHER mode,

the Rear Gear can be set to Disable mode only

and have AV-IN 1 and AV-2 setting.

• Screen saver: turn on/off the screensaver.

Page 2

• Dual: Select ON or OFF the Dual zone

function.

• Key: Use buttons at FRONT (buttons

perform operations for the current mode of the

front zone) or REAR (buttons perform DVD

functions). This function is available only if ON

is selected for DUAL.

Date and Time page

• Date: set current year, month and date.

• Time: set current time.

RDS and Radio page

Page 1

• Stereo: Select STEREO (stereo reception

mode) or MONO (mono reception). When the

received stereo signal is weak, switch to mono

mode to improve the signal. The function is

available only in FM bands.

• DX: Select LOCAL (only local station

reception) or DX (local and distant station

reception).

• TA: Seek/Alarm. In TA SEEK mode, the

unit will seek for traffic announcement program

when TA is pressed; in TA ALARM mode, no

TA/TP is displayed and the alarm is set off.

Page 2

• EON TA: DX/Local. If you want to receive

information from local stations only, select

EON TA Local mode. Otherwise, select EON

TA DX mode.

• REG: REG ON (the receiver accepts

regional variants of the tuned station with REG

icon turned on), and REG OFF (the receiver

ignores regional variants).

• PI: Mute/Sound. PI sound refers to the

reception noise when the AF function tries to

scan alternative frequency.

• Retune: RETUNE refers to the time period

the unit allows for radio scan when reception is

interrupted. “SHORT” represents a time period

of 30 seconds and “LONG” represents a time

period of 90 seconds.

• Mask: DPI/ALL. During MASK DPI mode,

the unit will mask only the AF which has

different PI, this is the default mode; during

MASK ALL mode, the unit will mask the AF

which has different PI and no RDS signal with

high field strength.

Page 3

• Radio Area: Select the radio broadcast

area (Europe/USA/ASIA/SOUTH AMERICA).

System page

In this menu you can see the current version

information.

Calibration page

“Carefully press and hold stylus on the

center of the target. Repeat as the rarget

moves around the screen” is displayed. Touch

and hold the cross in each position until it

moves to a different position. After repeating

it 4 times, the calibration of the screen is

complete; touch the screen anywhere to return

to menu. The calibration procedure is useful

when some malfunction occur with the touch

screen, and it needs adjustment.

14

Operation

Utilities

In the main menu touch UTIL item to go

to utility menu consisting of Calculator and

Calendar items. Touch an item to go to

correspondent function.

Calculator

When you select Calculator an interface

will show in which you can perform basic

arithmetical operations by touching buttons on

the screen including following:

MC memory numeric clear

MR memory numeric restore

C current numeric clear

MS numeric save memory

M+ add edit numeric to memory numeric

CE clear error

backspace back space

Touch arrow in the right upper corner to exit

calculator.

Calendar

When you select Calendar an interface will

show in which you can select year and month

by touching arrow icons.

Touch arrow in the right upper corner to exit

calendar.

Radio operations

User interface of Radio mode

When the unit is switched to Radio mode,

the below touchable user interface will be

displayed on the display:

1 2 3 4 5 76

8 9 10 11 12 13 14 15 16 17 18

NAVI

1. PTY button. Touch to enable/disable PTY

function. In the PTY list, touch a program type

to start its search.

2. TA button. Touch to enable/disable TA

function.

3. AF button. Touch to enable/disable AF

function.

4. ST button. Touch to select stereo/mono

reception mode.

5. Current band and frequency.

6. Touch to enable navigation mode.

7. Preset station button. Touch to select the

station. Touch and hold to save the current

frequency under the preset number.

8. LOC button. Touch to select local/distant

station reception.

9. Mute button; touch to switch sound on/off.

10. Volume down button. Touch to decrease

volume.

11. Volume level.

12. Volume up button. Touch to increase

volume.

13. BAND button. Touch to select bands.

14. AS/PS button. Touch to scan all saved

stations in current band. Touch and hold to find

and save 6 availble stations in current band.

15. button. Touch for automatic search of

the nearest station downwards.

16. button. Touch repeatedly to change

frequency step by step downwards.

17.

button. Touch repeatedly to change

frequency step by step upwards.

18. button. Touch for automatic search of

15

Operation

the nearest station upwards.

Band selection

Select the RADIO mode. Press BAND button

on the panel or BND/RDM button on the RC to

select the desired band: FM1, FM2, FM3, AM1

(MW1), AM2 (MW2).

Manual/automatic tuning

• Manual tuning: press TUN-/TUN+ buttons

on the panel or SEEK-/ and SEEK+/

on the RC and hold for 2 seconds to enter

the manual tuning mode. Press these buttons

repeatedly to select a frequency downward or

upward step by step.

• Automatic tuning: press TUN-/TUN+

buttons on the panel or SEEK-/

and

SEEK+/

on the RC repeatedly, the

automatic search will start. It will play when

finds the station.

Programming tuner stations

There are 6 numbered preset buttons on the

RC and panel, with which you can store and

recall stations for each band (18 FM, 12 AM).

Select a station, then press and hold a preset

button. The station will be saved in the memory

under the corresponding number. To recall a

stored station, press the corresponding preset

button.

Auto memory store/Preset scan

Auto store: Select a band, press and hold

AMS button on the panel or P.SCN/RPT button

on the RC to enter auto store mode. The radio

will automatically store 6 stations to the 6

preset memories of the current band. To stop

auto store, press the button again.

During auto station preset, the unit will

search and store stations with the strong signal

first, and then weaker signal stations until the

memories are full.

Preset scan: Select a band, press AMS

button on the panel or P.SCN/RPT button

on the RC to scan all preset stations in the

memories of the current band. To stop preset

scan, press the button again.

RDS function

RDS (Radio Data System) service availability

varies with areas. Please understand if RDS

service is not available in you area, the

following service is not available, either.

AF (Alternative frequencies) function

Press AF/TA button on the RC or AF/REG

button on the panel to enable AF function.

When the radio signal strength is poor,

enabling the AF function will allow the unit to

automatically search another station with the

same PI (Program Identification) as the current

station but with stronger signal strength.

AF indicator on the display will flash until

RDS information is received. If RDS service is

not available in your area, turn off the AF mode.

TA (Traffic alarm) function

Press TA/EON button on the panel to

activate the traffic alarm function.

When TA function is activated, it will search

the station with TA information automatically.

If there is no TA information, it will search the

station with TP information automatically, if

there is no TP information either, it will return to

the previous station after searching.

When receiving the station with TP

information but without TA information,

TP icon is on and TA icon keeps blinking;

when receiving the station with TP and TA

information, both TP and TA icons are on.

When playing in other mode and TA

information is received, it will change to the

radio mode automatically. After playing over,

it will return to the previous mode. Press TA/

EON button on the panel once to ignore the

received TA information, do it twice to turn off

the function.

PTY (Program type) function

Press PTY button on the RC to activate

the PTY function, press it repeatedly to show

Music group/Speech group/PTY off. Choose

16

Operation

the needed PTY type by pressing the icon

in the touchable screen or pressing the

corresponding number buttons on the RC.

When PTY search is on, and the selected type

matches, PTY information is displayed. If PTY

code is different or not available, PTY NONE

icon will blinks, PTY engaging automatically

exit to normal mode.

TV tuner operations

Connect a TV antenna to the TV antenna

jack of the unit. Select TV mode, then touch

the center of the display; following interface will

be displayed:

1 2 3 4 6 75

1. Touch to enable navigation mode.

2. Touch to go to auto setting of channels.

3. Touch to go to manual setting menu.

4. Touch to go to color setting menu.

5. Touch to hide the TV menu.

6. Touch to switch channels.

7. Touch to go to the main menu.

• To access the TV mode menu, press

MODE button on front panel or RC to select TV

mode or touch TV icon on main menu screen

to enter TV mode. Then touch the center of

the display to call the TV interface. To select

a menu page (Auto Setting or Manual Setting)

touch these items on the screen. Press cursor

buttons on the RC or touch the needed item on

the screen to select and adjust a parameter.

Touch BACK item on the screen to return to

last settings list.

AUTO PROGRAM

• System: select TV system (SECAM/PAL/

NTSC).

• Audio: select sound system (Audio1/

Audio2/Audio3).

• Search: select to start automatical search

and storing of TV channels.

MANUAL PROGRAM

• Storage: select the storage number of the

channel.

• System: select TV system (SECAM/PAL).

• Audio: select sound system (Audio1/

Audio2/Audio3).

• Channel: Select the number of the

channel.

• Fine: perform fine tuning of picture quality.

• Memory: select on (memorize the found

channel) or off (not memorize).

AV-IN mode

Connect an external audio/video signal

source to this unit. Select AV-IN mode in the

main menu or by pressing repeatedly MODE

button, then select AV-IN1 or AV-IN2. Touch

the center of the screen; following interface will

be displayed:

1 2 3

1. Touch to enable navigation mode.

2. Touch to go to color setting menu.

3. Touch to quit AV-IN mode.

Do not connect AV inputs on the rear

panel at the same time with the AV input on

17

Operation

the front panel. Interference of the signals can

damage the unit.

Disc/USB/SD/MMC operations

USB/SD/MMC notes

USB format supports 2.0. Capacity: up to 8

Gb.

For correct and satisfactory operation,

licensed SD/MMC memory cards of famous

brands should be used with this unit. Avoid

using memory cards of unknown brands.

Capacity: up to 8 Gb.

Insert/Eject disc

• Press EJECT button and insert a disc into

the disc slot with label side up. The disc will be

automatically loaded into the unit. The first file

in the root folder will be played.

• Press EJECT button to eject the disc from

the slot. If the disc is not removed from the slot

within several seconds, it will be automatically

loaded into the slot again. When the disc is

ejected and removed, the unit will automatically

switch to another mode.

Inserting an SD/MMC card/USB device

Open the front panel and insert an SD/

MMC memory card into the card slot. Open the

USB slot cover on the front panel and insert

a USB into the USB slot. Then the playing

mode will be changed into Card or USB mode

automatically. The first card/USB device track

playback will start.

When SD/MMC card and USB device are

both inserted, the playing mode will be changed

into the mode of the device inserted later.

DVD touch interface

When a DVD is played, touch the center

of the screen; the screen will show following

interface:

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

1. Touch to adjust the monitor tilt angle.

2. Touch to enable navigation mode.

3. Touch to go to color setting menu.

4. Disc type.

5. Current playback title/chapter/track

number.

6. Current playback time.

7. Touch to select previous or next track.

8. Touch to go to main menu.

9. PLAY/PAUSE button. Touch to start,

pause or resume playback.

10. STOP button. Touch to stop playback

11.

button. Touch repeatedly to change

rewind speed.

12.

button. Touch repeatedly to change

fast forward speed.

13. REPEAT button. Touch repeatedly to

select repeat playback mode.

14. SUBT button. Touch to select disc

subtitle language.

15. AUD button. Touch to select disc audio

language.

16. MENU button. Touch to go to the disc

root menu.

VCD touch interface

When a VCD is played, touch the center

of the screen; the screen will show following

interface:

18

Operation

321 74 5 6 8

9 10 11 12 13 14 15

1. Touch to adjust the monitor tilt angle.

2. Touch to enable navigation mode.

3. Touch to go to color setting menu.

4. Disc type

5. Current playback title/chapter/track

number and PBC status

6. Current playback time

7. Touch to select previous or next track.

8. Touch to go to main menu.

9. PLAY/PAUSE button. Touch to start,

pause or resume playback.

10. STOP button. Touch to stop playback

11.

button. Touch repeatedly to change

rewind speed.

12.

button. Touch repeatedly to change

fast forward speed.

13. REPEAT button. Touch repeatedly to

select repeat playback mode.

14. AUD button. Touch to select audio

channel.

15. PBC button. Touch to switch BPC

function on or off.

MP3/DivX/JPEG disc touch interface

When a file disc, USB or a memory card

is played, touch the center of the screen; the

screen will show following interface:

1 2 3 4 5 6

7 8 9 10 11 12 13 14 15 16

1. RDM button. Touch for random playback.

2. RPT button. Touch to select repeat

playback modes.

3. INT button. Touch for intro playback.

4. Touch the button to go to the previous file

list page.

5. ID3-tag window.

6. File list. Touch the needed file to start its

playback.

7. Touch the button to go to the next file list

page.

8. MDC button. Touch to go to folder selection.

9. Mute button; touch to switch sound on/off.

10. Touch to enable navigation mode.

11. STOP button. Touch to stop playback.

12. PLAY/PAUSE button. Touch to pause or

resume playback.

13. Touch the button to go to the previous

file/track.

14. Touch the button repeatedly to select

track rewind speed.

15. Touch the button repeatedly to select

track fast-forward speed.

16. Touch the button to go to the next file/track.

Use cursor buttons to navigate in the

interface and press ENTER button to confirm

your selection.

Manufacturer guarantees regular

playback of licensed discs only. Some AVI files

cannot be played due to their parameters and

recording conditions.

Color setting

19

Operation

When you enter color setting menu,

following interface will be displayed:

1 2 3 4

1. Parameter list. Touch a parameter to

select it. Saturation, brightness, contrast,

sharpness and hue are available for

adjustment.

2. Increase/decrease buttons. Touch to

increase or decrease the value.

3. Touch to reset your adjustment to default

values.

4. Touch to quit color setting.

You can also press cursor buttons on the RC

to select and adjust parameters.

DVD setup

Press SETUP button on the RC to go to

DVD setup menu. Press cursor buttons on

the RC to select parameters and options for

adjustment, press ENTER button to confirm

your selection. You can also touch needed

items on the screen as follows:

1 2 3

1. Parameter list. Touch a parameter to

select it.

2. Touch to select 1 or 2 menu page.

3. Option list button. Touch to open option

list for corresponding parameter.

Following parameters are available for

adjustment:

• OSD lang: Select on-screen display

language.

• Subtitle lang: Select a DVD subtitle

language.

• Audio lang: select a language of the DVD

audio.

• DVD menu lang: Select a language of the

DVD menu.

• Password: In order to make the Rating

feature work, the password mode must be

turned on. If you want to set the ratings limit,

you will need to enter the default password,

which is 0000, then press ENTER to confirm.

To change the password, enter the Password

change submenu. If you change the password,

the default password 0000 will be void.

• Rating: The Rating control level is for

parents to control playing content and protect

your children from violence and erotic. The

disc, the level of which is higher than the

setting level can not be played.

• TV shape: Select 4:3/PS (the wide-screen

image shows on the full screen, but some

part is cut off), 4:3/LB (the wide-screen image

shows and black bars appear on the top and

bottom of screen), Wide (wide-screen image is

shown).

• NTSC/PAL: Select color system NTSC or

PAL.

• Default: Reset to the initial factory settings.

Play/pause

The unit will automatically play from the first

sound track recorded on a disc/SD/MMC/USB

device. To ensure good system performance,

wait until the unit finishes reading the disc/

device information before proceeding. Press

button on the RC or 3/ button on the

panel to pause playback, press it again to

resume playback.

Страница загружается...

Hyundai H-CMD4001G Руководство пользователя

Похожие модели бренда

Модели других брендов