18
TECHNICAL PASSPORT ENGLISH
Washing Machines
NOTES
1. Washing time changes in different
water pressure, drain situation,
clothes texture, weight, temperature,
etc.
2. The needed washing time displayed
during operation could be different
from the actual time needed.
3. As the quantity of clothes and
detergents type are different, rinse
result may be not ideal if the spin
speed is slow. In this case, add the
rinse times.
4. Parameter in the above chart will be
different as the machine types are
different.
5. When you select program cotton ,
temperature 60“C and spin speed
500rpm, the washing time will
increase automatically.
CARE AND MAINTENANCE
Washing machine should be kept
in good maintenance during long time
of use. Good using habit could extend
its service life.
Pull out the plug when in
maintenance, in case of electricity
danger.
Washer body
Wipe the machine body with
soft clean cloth. Dip the cloth into
detergents or liquid soap and then
clean the machine body when there is
heavy dirt on it.
Do not pour water directly on the
machine.
Do not clean the machine body
with scouring powder, diluents, gasoline,
alcohol, and other chemical things.
Sealing washer of the door
Wipe the dirt and fabric scrap away
by towel every time after use. If there
are things like pin in the groove of the
sealing washer, make sure to fetch them
out.
Clean methods of the detergent
case
Clean the detergent case
regularly in case that detergent
remained in the case get mildew.
Pull out while lift the case to
carry it out, clean it by water and restore
it.
Clean the water inlet Valve
(Suggest clean it every 6
months)
1. Detach the Water Supply Hose from
the Water Inlet.
2. Take out the metal fi lter from the
water inlet valve.
3. Clean the metal fi lter of Water Inlet
with a toothbrush etc, then assemble
the metal fi lter in the valve.
4. Connect the Water Supply Hose.
5. The lint must not to be allowed to
accumulate around the washing
machine (not applicable for
appliances intended to be vented to
the exterior of the building).