12
TECHNICAL PASSPORT ENGLISH
Washing Machines
3. Preparation:
Close the washer door.
Put the detergent into the
Detergent Case.
Connect the Drain Hose. Connect
the Water Supply Hose to the faucet and
turn the Water tap on. Plug the Power
Cord into a socket-outlet.
4. Press the POWER button to turn the
power on.
5. Twist the PROGRAM knob to select
the BLANKET program.
6. Press the START/PAUSE button,
the washer will start the washing
operation.
7. At the end of operation, the buzzer
will sound.
Do not use net bag for the
machine washable blanket, otherwise
the washer vibrates abnormally and will
be damaged in the spin process.
Do not tweak or roll clothes into
a boll before put them into the tub.
Electric blanket and carpet are
forbidden of wash.
100% villous and the long-
villous blanket are forbidden of wash.
Water temperature should not
exceed 30°C.
HOW TO USE THE PRESET
COURSE
The preset time means that when
the washing is fi nished.
1. Preparation:
Load the laundry into the washer.
Close the washer door.
Put the detergent and softener
into the Detergent Case.
Connect the Drain Hose. Connect
the Water Supply Hose to the faucet and
turn the faucet on. Plug the Power Cord
into a socket-outlet.
2. Press the POWER button to turn the
power on.
3. Twist the PROGRAM knob to select
the desired program course.
4. Select the COURSE or PROGRAM
according to the use need.
5. Touch the PRESET button to set the
fi nishing time of washing.
6. Press the START/PAUSE button, the
washer will start PRESET course.
7. At the end of operation, the buzzer
will sound.
PRESET function could not be
used for WOOL course.
To change the preset time, please
press POWER ON/OFF button, restart
from step 2.
To cancel the preset, press POWER
ON/OFF to shut off the electrical power.
To check the preset procedure,
press PRESET button, the washer will
show you the current preset setting for
5 seconds.
The actual ending time maybe
different from the preset time as the
different of water pressure, drainage,
type of clothes, water temperatures, etc.
One minute after preset is
started, only the PRESET light will be
on.