Hyundai H-CMD4031 Руководство пользователя

Категория
Мультимедиа-приемники для автомобилей
Тип
Руководство пользователя

Это руководство также подходит для

МУЛЬТИМЕДИЙНЫЙ
DVD/CD/MP3-РЕСИВЕР
СО ВСТРОЕННЫМ 3”TFT-
ДИСПЛЕЕМ И ТВ-ТЮНЕРОМ
MULTIMEDIA DVD/CD/MP3
RECEIVER WITH BUILT-IN
3” TFT DISPLAY AND TV TUNER
Руководство по эксплуатации Instruction manual
H-CMD4031
2 3
Table of contents Table of contents
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.
12
12
12
12
12
12
13
13
13
13
13
13
13
14
14
14
14
14
14
14
15
15
15
15
15
15
16
16
16
16
16
16
16
16
16
16
16
17
17
Table of contents
Before you start
Utilization of the product
Important safeguards
Installation/Connection
Installation
General notes
Din Front/Rear-Mount
1. DIN front-mount (Method A)
Dismantling the unit
Trim frame installation
2. DIN rear-mount (Method B)
Detachable control panel
Anti-theft system
Connection
Connection diagram
ISO connection table
Using the ISO connector
Parking wire connection
Reverse cable connection
Operation
Control elements
Front panel
Inner panel
Remote controller
Changing battery
General operations
Reset the unit
Turning the unit on/off
Mode selection
Mute function
Volume control
Setting the sound characteristics
EQ modes
Loudness
Clock setting
Beep
Button backlight color
TFT on/off
2
4
4
4
5
5
5
5
5
6
6
6
6
7
7
7
8
8
9
9
9
9
9
10
10
10
11
11
11
11
11
11
12
12
12
12
12
12
12
AUX in jack
Radio operations
Band select
Audio/Manual tuning
Programming tuner stations
Automatic store/preset scan
Mono/select control
Local radio station search
RDS function
AF function
TA function
PTY (Program Type)
Other parameter setting
TV operations
TV and audio system
Search channels
Save channels
Disc/USB/SD/MMC operations
Insert/Eject disc
MP3/DivX/JPEG file playback
Play/pause/stop
Selecting tracks/chapters
Fast forward/rewind
Repeat playback
Random playback
Goto
Programming the playback
OSD function
Zooming in/out
Slow playback
PBC function
Changing angle
Selecting audio language
Selecting subtitle language
Selecting sound channel
Selecting video system
Menu navigation
ID3 tag information
USB/SD/MMC notes
Inserting SD/MMC card/USB device
System setup
System setup
Disc setup
General information
Handling compact discs
Cleaning discs
Cleaning the unit body
Accessories
Troubleshooting guide
Specification
2 3
Table of contents Table of contents
17
17
17
18
19
19
19
19
19
20
21
4
Before you start
If you want to dispose this product, do not mix it with general household waste. There is
a separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling.
Please contact your local authorities for the correct method of disposal. By doing so, you
will ensure that your disposed product undergoes the necessary treatment, recovery and
recycling and thus prevent potential negative effects on the environment and human health.
Utilization of the product
Important safeguards
• Read carefully through the manual to
familiarize yourself with this unit.
• Keep this manual handy as a reference
for operating procedures and precautions. Do
not allow persons who have not read through
this manual to use this unit.
• “CLASS 1 LASER PRODUCT”
This product contains a laser diode of
higher class than 1. Laser beams from the
optical pickup are dangerous to the eyes. To
ensure continued safety, do not remove any
covers or attempt to gain access to the inside
of the product. Refer all servicing to qualified
personnel.
• Do not allow this unit to come into contact
with liquids. Electrical shock could result. Also,
damage to this unit, smoke, and overheating
could result from contact with liquids or dust.
Protect this unit from moisture.
• Make sure that foreign objects do not get
inside the unit; they may cause malfunctions,
or create safety hazards such as electrical
shock or laser beam exposure.
• The beginning of operation is the moment
of the unit installation. Before use the device
in winter it is recommended to heat up the
passenger compartment during 20 seconds or
to the operation temperature.
• Using the unit with the temperature that
goes beyond the operation temperature greatly
decreases the operation resource of the screen
and other components of the unit and can
result in an outage.
• Disconnect the vehicle’s negative battery
terminal while mounting and connecting the
unit.
• The unit is designed for negative
terminal of the battery, which is connected
to the vehicle metal. Please ensure it before
installation.
• When replacing the fuse, be sure to use
one with an identical amperage rating. Using a
fuse with a higher amperage rating may cause
serious damage to the unit.
• Do not allow the speaker wires to be
shorted together when the unit is switched
on. Otherwise it may overload or burn out the
power amplifier.
• Make sure you disconnect the power supply
and aerial if you will not be using the system for a
long period or during a thunderstorm.
• Make sure you disconnect the power
supply if the system appears to be working
incorrectly, is making an unusual sound, has
a strange smell, has smoke emitting from it
or liquids have got inside it. Let a qualified
technician check the system.
• Always keep the volume low enough so that
you can hear sounds from outside the vehicle.
• Should this product fail to operate
properly, contact your dealer or nearest service
center.
5
Installation/Connection
Installation
General notes
• Choose the mounting location where the
unit will not interfere with the normal driving
function of the driver.
• Before finally installing the unit, connect
the wiring and make sure that the unit works
properly.
• Consult with your nearest dealer if
installation requires the drilling of holes or other
modifications of the vehicle.
• Install the unit where it does not get in the
driver’s way and cannot injure the passenger if
there is a sudden stop, like an emergency stop.
• If installation angle exceeds 30° from
horizontal, the unit may not perform properly.
• Avoid installing the unit where it would
be subject to high temperature, such as from
direct sunlight, or from hot air, from the heater,
or where it would be subject to dust, dirt or
excessive vibration.
Din Front/Rear-Mount
This unit can be properly installed either
from ‘Front’ (conventional DIN Front-mount) or
‘Rear’ (DIN Rear-mount installation, utilizing
threaded screw Holes at the sides of the unit
chassis). For details, refer to the following
illustrated installation methods.
1. DIN front-mount (Method A)
1. Car dashboard
2. Sleeve
3. Screw
4. Nut (5 mm)
5. Spring washer
6. Screw (5 х 25 mm)
7. Metal strap
8. Flat washer
3
2
1
182
53
1. Install the sleeve into the dashboard;
ensure it is installed with the correct side and
there are no obstacles (wires, dashboard
elements, etc) for the unit installation.
2. After installing the sleeve into the
dashboard, bend tabs fitting to the size of the
dashboard to fix the sleeve in place.
3. Use the metal strap to fix the rear side of
the unit. Determine a place for fixing and install
the strap as shown in the picture. You can bend
the strap to the needed angle with your hands.
4. Make the necessary wire connections.
Ensure the connections are correct.
5. Install the unit into the sleeve until the side
locks are fixed.
3
5
4
6
8
1
7
Dismantling the unit
a – Trim frame
b – Frame uninstall direction
c – Release key insertion
6
Installation/Connection
в
б
а
1. Switch off the unit and detach the front
panel.
2. Insert your fingers into the groove in the
front side of the trim frame (apply some effort to
detach the frame). Pull the frame to detach it.
3. Insert the supplied release keys into the
both sides of the unit body to click, as shown
in the picture. To extract the unit from the
dashboard, pull the release keys or the unit
body to pull it out. Before detaching the unit,
ensure it is not fixed with the metal strap.
Trim frame installation
To install the trim frame, press it to the unit
body and push it to fix it in place. This should
be done before installing the front panel;
otherwise you are not able to install the trim
frame. When the trim frame being installed,
the side with the groove should face down and
fixed first.
2. DIN rear-mount (Method B)
For this method, use the screw holes in the
lateral sides of the unit. Fix the unit with the
help of the factory radio mounting brackets.
1. Select a position in which the screw holes
of the brackets (3) are aligned with the screw
holes in the unit body, and screw in two screws
(2) in each side.
2. Screw.
3. Factory radio mounting brackets.
4. Vehicle dashboard.
5. Lock (remove this part).
The outer trim frame and mounting
sleeve are not used for method of installation.
2
2
5
5
4
3
Detachable control panel
Install the fastening hole on the right side of
the front panel in the right fastening of the unit.
Then insert the left fastening on the panel into
the fixing hole on the left part of the unit. Press
on the upper right part of the panel until a click.
Ensure that the panel is properly fixed.
To detach the front panel, press OPEN
button, then distract the left side of the panel
from the fastening of the unit.
The control panel can easily be
damaged by shocks. After removing it, place
it in a protective case and be careful not to
drop it or subject it to strong shocks. The rear
connector that connects the main unit and the
control panel is an extremely important part. Be
careful not to damage it by pressing on it with
fingernails, pens, screwdrivers, etc.
If the control panel is dirty, wipe off the
dirt with soft, dry cloth only. And use a cotton
swab soaked in isopropyl alcohol to clean the
socket on the back of the control panel.
Anti-theft system
The front panel of this unit can be stored in
the included protective case when not in used
and carried away when you leave the vehicle
to deter theft.
Switch off the power of the unit. Detach the
front panel, then put it to the protective case
and take it with you.
7
Installation/Connection
Connection
Connection diagram
Radio antenna socket
Video output (yellow)
Rear view camera input (yellow)
RCA line out (left=white; right=red)
TV antenna
Reverse (pink) Parking (purple)
ISO connection table
Location Function
Connector A Connector B
1 - Rear right (+) - Blue
2 - Rear right (-) - Blue/White
3 - Front right (+) - Grey
4 Battery +12V/Yellow Front right (-) - Grey/White
5 Power antenna/Orange Front left (+) - Green
6 Panel light/White Front left (-) - Green/White
7 Ignition key (+12V)/Red Rear left (+) - Brown
8 Ground/Black Rear left (-) - Brown/White
Power antenna wire is intended for power supply of the antenna and for remote control of
an additional amplifier.
8 9
Installation/Connection Operation
Using the ISO Connector
1. If your car is equipped with the ISO
connector, then connect the ISO connectors as
illustrated.
1 2
2. For connections without the ISO
connectors, check the wiring in the vehicle
carefully before connecting, incorrect connection
may cause serious damage to this unit.
Cut the connector, connect the colored leads
of the power cord to the car battery as shown
in the colour code table above for speaker and
power cable connections.
Parking wire connection
Parking brake lead
Brake light
Car frame
Battery
Purple Wire
If Parking cable is connected to hand brake switch, the video display of the TFT monitor will be
controlled by driving status. When the car is moving ahead, if the video disc is played, the screen
shows warning and blank screen. The warning screen will prevent the driver from watching images.
Reverse driving cable connection
Car frame
Car frame
Rear view video camera lead
Reverse driving light
Gearbox
Pink wire
Battery
If the rear view video camera is connected, the unit automatically switches to camera mode
during reverse driving. The unit returns to the original work mode after the reverse driving is done.
8 9
Installation/Connection Operation
Control elements
Front panel
1. PWR/OFF/TFT button
2. NEXT button
3. TA button
4. SCN button
5. AF button
6. MOD/MUT button
7. IR sensor
8. TFT display
9. OPEN button
10. USB port
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20 21 22 23
11. BND/NP button
12. PREVIOUS button
13. SELECT button/VOLUME regulator
14. PTY/PLAY/PAUSE button
15. AUDIO TYPE/APS button
16. CLK button
17. 1/OSD/LEFT button
18. 2/RPT/RIGHT button
19. 3/INT/UP button
20. 4/RDM/DOWN button
21. 5/STOP/ENTER button
22. 6/SET/PAU button
23. AUX input
Inner panel
1 2 3 4 5
1. Disc loading slot
2. SD/MMC memory card slot
3. RESET button (hole)
4. Panel status indicator
5. EJECT button
Pressing RESET hole will erase the clock
setting and stored stations.
Panel status indicator lights up when you flip
down the panel and flashes when you remove
the panel.
10
Operation
Remote controller
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
1. SETUP button
2. POWER button
3. ANGLE button
4. ZOOM button
5. STOP button
6. PROG button
7. STEREO button
8. Cursor (UP/DOWN/LEFT/RIGHT) buttons
9. REPEAT button
10. AMS button
11. TITLE button
12. OSD button
13. Number buttons
14. SLOW button
15. MODE button
16. SUB-T button
17. MEN/PBC button
18. PLAY/PAUSE button
19. LOCAL button
20. RANDOM button
21. ENTER button
22. SYSTEM button
23. BAND button
24. MUTE button
25. SEL button
26. AUDIO button
27. VOL+/VOL- buttons
28. PREVIOUS/NEXT buttons
29. GOTO button
Changing the battery
1. Press the catch and at the same time pull
out the battery tray.
2. Insert the 1 x lithium battery, type CR
2025 3V with (+) mark facing up. Insert the
battery tray into the remote control.
11
Operation
Press VOL+/VOL- buttons on the RC or rotate
VOLUME regulator on the panel to adjust the
selected item. Balance is to adjust the balance
between the left and right speakers. Fader is to
adjust the balance between the rear and front
speakers. After you have reached your desired
effect, leave the unit idle in order for the new
setting to take effect.
If the equalizer is set on, bass and treble
are not adjustable.
EQ modes
Press repeatedly SELECT button on the panel
or SEL button on the RC until the display shows
EQ OFF. Press VOL+/VOL- buttons on the RC
or rotate VOLUME regulator on the panel to
choose an equalizer effect: POP => ROCK =>
CLASS => FLAT => EQ OFF. After you have
reached your desired effect, leave the unit idle in
order for the new setting to take effect.
Loudness
Press repeatedly SELECT button on the
panel or SEL button on the RC until the display
shows LOUD ON (LOUD OFF). Press VOL+/
VOL- buttons on the RC or rotate VOLUME
regulator on the panel to select between
LOUD ON/LOUD OFF. LOUD function is to
emphasize the bass output; the word LOUD
ON indicates that the LOUD mode is on.
Clock setting
Press CLK button on the panel to show the
time on the display. Press and hold it, the hour
will be in green. Rotate VOLUME regulator on
the panel or press VOL+/VOL- buttons on the RC
to adjust the hour. Press SEL button on the RC
or SELECT button on the panel, the minute will
be in green. Rotate VOLUME regulator on the
panel or press VOL+/VOL- buttons on the RC to
adjust minutes. Press CLK button to confirm.
Beep
Press repeatedly SELECT button on the
panel or SEL button on the RC until the display
shows BEEP ON (BEEP OFF). Press VOL+/
General operations
Reset the unit
Operating the unit for the first time or after
replacing the car battery, you must reset the
unit. Press RESET button (hole) with a pointed
object, such as a ballpoint pen, to set the unit
to initial state.
When some errors occur, you can also
press RESET button to resume to normal, and
it will erase some memorized functions.
Turning the unit on/off
Press any button on the panel or the RC
(except OPEN button) to turn on the unit. Press
and hold POWER/TFT OFF button on the
panel or press POWER button on the RC to
turn off the unit.
Mode selection
Repeatedly press MOD/MUT button on the
panel or MODE button on the RC to select a
mode: Radio => Disc => USB => Memory card
=> AUX.
The Disc, Card and USB modes are
only available when corresponding storages
are connected to the unit.
Mute function
Press MUTE button on the RC or press and
hold MOD/MUT button on the panel to turn off
the sound. “MUTE ON” appears on the display.
Press the button again or adjust volume to
resume the sound output.
Volume control
Press VOL+/VOL- buttons on the RC or
rotate VOLUME regulator on the panel to
decrease or increase sound volume level.
Setting the sound characteristics
Press repeatedly SELECT button on the
panel or SEL button on the RC to select the
audio setting: VOL (volume) => BAS (bass) =>
TRE (treble) => BAL (balance) => FAD (fader).
12 13
Operation Operation
VOL- buttons on the RC or rotate VOLUME
regulator on the panel to select between BEEP
ON (beep sound will be heard when buttons
are pressed) and BEEP OFF. After you have
reached your desired effect, leave the unit idle
in order for the new setting to take effect.
Button backlight color
Press repeatedly SELECT button on the
panel or SEL button on the RC until the display
shows COLOR1 (COLOR2). Press VOL+/VOL-
buttons on the RC or rotate VOLUME regulator
on the panel to select between COLOR1
(green button backlight) and COLOR2 (red
button backlight). After you have reached your
desired effect, leave the unit idle in order for
the new setting to take effect.
TFT on/off
Press POWER/TFT OFF button on the panel
to switch the TFT display off. Press the button
again to switch the display on.
AUX in jack
AUX-in jack is intended for connecting
external audio equipment to amplify the
sound. If connection is made correctly, the
audio signal from the external source will be
translated through the acoustics of the head
unit. This enables to adjust the volume and
quality of the sounding. For example, you can
connect an MP3-player to listen to tracks using
the car acoustic system.
Radio operations
Band select
Press repeatedly BND/NP button on the
panel or BAND button on the RC to select your
desired radio band in Radio mode: FM1, FM2,
FM3, AM1 (MW1), AM2 (MW2). In each set of
the bands you can store up to 6 preset stations,
making total 30 preset memory stations.
Auto/Manual tuning
• Manual tuning: Press PREVIOUS/NEXT
buttons on the panel or on the RC to manually
adjust the radio frequency.
Auto tuning: Press and hold PREVIOUS/
NEXT buttons on the panel or on the RC, the
radio will seek to the next up or down strong
and clear frequency station automatically.
Repeat this action to seek for other desired
stations. To stop automatic search, press NEXT
or PREVIOUS button on the panel or on the RC.
Programming tuner stations
There are six numbered preset buttons,
under which you can store and recall stations
for each band. Select the needed frequency,
then press and hold a preset button. The
station will be saved in the memory under
the corresponding number. To recall a stored
station, press the corresponding preset button.
Automatic store/preset scan
• Automatic store: Press and hold AUDIO
TYPE/APS button on the panel or AMS button
on the RC. SCAN ON will be displayed. The
radio will automatically store the 6 strongest
available stations to the 6 preset memories of
the current band. To stop auto store, press this
button again.
• Preset scan: Press AUDIO TYPE/APS
button on the panel or AMS button on the RC.
INTRO ON will be displayed. The receiver
will scan the saved stations in all bands for 5
seconds.
Mono/Stereo control (in FM radio mode)
Press repeatedly SELECT button on the
panel or SEL button on the RC until the
display shows ST ON (ST OFF). Press VOL+/
VOL- buttons on the RC or rotate VOLUME
regulator on the panel to select between ST
ON/OFF. ST ON means stereo reception of
the signal; ST OFF means mono reception
mode. Or press STEREO button on the RC to
switch stereo reception on/off. Improvement
of reception of distant stations can be done
12 13
Operation Operation
by selecting mono mode, which may cut down
some reception noise.
Local radio station search
Press repeatedly SELECT button on the panel
or SEL button on the RC until the display shows
LOC ON (LOC OFF). Press VOL+/VOL- buttons
on the RC or rotate VOLUME regulator on the
panel to select between LOC ON/OFF. LOC ON
means that only local stations are received; LOC
OFF means that both local and distant stations
with weak and strong signal are received.
Or press LOCAL button on the RC to switch
between local and distant station reception.
RDS function
RDS (Radio Data System) service availability
varies with areas. Please understand if RDS
service is not available in you area, the
following service is not available, either.
AF (Alternative Frequencies)
function
Press AF button on the panel to turn the AF
function on or off. When the function is on, AF
symbol will blink on the display.
When the radio signal strength is poor,
enabling the AF function will allow the unit to
automatically search another station with the
same PI (Program Identification) as the current
station but with a stronger signal, so that you
do not have to retune the stations when driving
between different transmitter coverage areas.
PS (Program Service name): the name of
station will be display instead of frequency.
If RDS service is not available in your area,
turn off the AF mode.
TA (Traffic Alarm) function
Press TA button to turn TA function on or
off. When on, the TA symbol will show on the
display.
In TA mode traffic program will be
automatically searched, until the program
is received. When traffic announcement is
received the unit will temporarily switch to the
tuner mode (regardless of the current mode)
and begin broadcasting the announcement.
After the traffic announcement is over, it will
return to the previous mode and volume level.
To interrupt traffic announcement press TA
button shortly; it will not switch off the TA mode.
PTY (Program Type)
This radio will allow you to select the type of
program required, and will search for a station
broadcasting that type of program.
Press PTY/PLAY/PAUSE button to show the
music type. Then press 1 - 6 number buttons
to choose different music programs available.
Press PTY/PLAY/PAUSE button twice to
show the speech type program. Then press 1
- 6 number buttons to choose different speech
programs. Each number button will show 2 or
3 different speech programs for you to choose:
Pop, Rock, Easy, Light, Classics, Other, Jazz,
Country, Nation, Oldies, Folk, News, Affairs,
Info, Sport, Educate, Drama, Culture, Science,
Varied, Weather, Finance, Children, Social,
Religion, Phone IN, Travel, Leisure, Document).
When PTY is selected, the radio starts to
search corresponding PTY information, and
stops if the corresponding PTY information
is detected. If no buttons are pressed within
several seconds, previously selected PTY is
searched. During 1 loop, if desired PTY is not
found, the unit will return to previous mode.
Press PTY/PLAY/PAUSE button for the 3rd
time to switch the PTY function off.
Other parameter setting
To choose the corresponding parameter,
press and hold SELECT button on the panel or
SEL button on the RC, then press it repeatedly
until the display shows the needed parameter.
Press VOL+/VOL- buttons on the RC or rotate
VOLUME regulator on the panel to choose the
needed option. After choosing, please leave
the unit idle to activate.
• TA ALARM/TA SEEK: In TA SEEK mode,
the unit will seek for traffic announcement
program; in TA ALARM mode the alarm is set
14
Operation
off.
• PI SOUND/MUTE: Choose either PI sound
or PI mute. PI sound refers to the reception
noise when the AF function tries to scan
alternative frequency.
• RETUNE S/L: RETUNE refers to the time
period the unit allows for radio scan when
reception is interrupted. SHORT represents
a time period of 30 seconds and LONG
represents a time period of 90 seconds.
• MASK DPI/ALL: During MASK DPI mode,
the unit will mask only the AF which has
different PI, this is the default mode; during
MASK ALL mode, the unit will mask the AF
which has different PI and no RDS signal with
high field strength.
TV operations
TV and audio system
• Press repeatedly SYSTEM button on the
RC or BND/NP button on the panel to select
one of the available TV systems.
• Press repeatedly AUDIO button on the RC
to select one of the available sound systems.
Search channels
Press AUDIO TYPE/APS button on the panel
or AMS button on the RC to automatically
search and save all available TV channels.
Press and hold PREVIOUS/NEXT buttons on
the panel or RC to adjust the current frequency
step by step.
Save channels
• When a channel is found, press and
hold a number button on the RC. The current
channel will be saved in the corresponding
number position. To call a saved station, press
a number button on the RC.
• Press PREVIOUS/NEXT buttons on the
RC or panel to go to previous or next saved
channel.
Disc/USB/SD/MMC operations
Insert/Eject disc
• Open the front panel and insert a disc into
the disc slot with label side up. The disc will be
automatically loaded into the unit. The first file
in the root folder will be played. Close the front
panel.
• Open the front panel and press EJECT
button to eject the disc from the slot. If the disc
is not removed from the slot within several
seconds, it will be automatically loaded into
the slot again. When the disc is ejected and
removed, the unit will automatically switch to
another mode.
Manufacturer guarantees regular
playback of licensed discs only. Some AVI
files cannot be played due to their parameters
and recording conditions. Video files more
than 2 Gb having AVI extension can be played
partially.
MP3/DivX/JPEG file playback
When you insert a storage containing MP3/
DivX/JPEG files, the screen will show following
interface:
1
2
3
4
1. Music/Photo/Video
2. Playback status
3. Track number/track name/folder name
(depending on the format)
4. Current track playback elapsed/remaining
time
15
Operation
Press STOP button on the RC or press and
hold 5/STOP/ENTER button on the panel; the
disc menu will be displayed as follows:
1 2
1. Folder list
2. File list
You can select the needed folder or file by
pressing cursor buttons. Press ENTER button on
the RC or 5/STOP/ENTER button on the panel.
If you are using a multi-format storage, press
repeatedly MEN/PBC button on the RC to
select between music, photo and video files.
Play/Pause/Stop
During playback press PLAY/PAUSE button
on the RC or press and hold 6/SET/PAU
button on the panel to pause playback. Do this
operation again to resume playback. To stop
playback, press STOP button on the RC or press
and hold 5/STOP/ENTER button on the panel.
Selecting tracks/chapters
During playback press PREVIOUS button on
the panel or on the RC to play the previous track/
chapter (depending on the format). Press NEXT
button on the panel or on the RC to play the next
track/chapter. Press number buttons (0-9) on the
RC to select the desired track/chapter.
Fast forward/rewind
Press and hold repeatedly PREVIOUS
or NEXT button on the panel or RC for fast
backward or forward playing correspondingly.
With each pressing and holding playback speed
will increase as follows: x2 => x4 => x8 => x20
=> Normal. While fast playback, press PLAY/
PAUSE button on the RC or PTY/PLAY/PAUSE
button on the panel to resume normal speed.
Repeat playback
Press and hold 2/RPT/RIGHT button on
the panel or press REPEAT button on the RC
repeatedly for repeat playing in different modes:
track/chapter repeat, folder repeat, disc repeat,
repeat cancel (depending on the format used).
Intro playback
Press and hold 3/INT/UP button on the panel
to activate introduction playback function.
Several initial seconds of each track will be
played. Press and hold the button again to
cancel intro playback.
Random playback
Press RANDOM button on the RC or press
and hold 4/RDM/DOWN button on the panel to
activate random playing mode. Press one more
time to return to normal playing.
Goto
Press GOTO button to show the playback
parameters for the current chapter/track/
time (track/title/chapter number or time).
Press cursor buttons to navigate between the
parameters and use number buttons to input
needed settings. Press ENTER button on the
RC or 5/STOP/ENTER button on the panel to
start playback from the set number or time.
Programming the playback
• Press PROG button on the RC to open
program menu.
• Use cursor buttons to select the program
position and use number buttons to input the
desired track/title/chapter (depending on the
disc type).
• Press PLAY/PAUSE button to start
program play, or move the cursor to select
PLAYING and press ENTER button on the RC
or 5/STOP/ENTER button on the panel to play.
• Move the cursor to CLEAR, press ENTER
16
Operation
button on the RC or 5/STOP/ENTER button on
the panel to delete the programmed list. Press
PROG button to quit programming.
OSD (On Screen Display) function
Press OSD button on the RC or press and
hold 1/OSD/LEFT button on the RC repeatedly
to show current playback information, such
as number of track/chapter/title, current track/
chapter/title time elapsed/remaining, total track/
chapter/title time remaining (depending on the
disc type).
Zooming in/out
During playback of video or images, press
repeatedly ZOOM button on the RC, the
picture will be zoomed in the sequence: X2
=>X3 =>X4 =>X1/2 => X1/3 => X1/4 =>
Normal. When the image is zoomed in, you
can move it by pressing cursor buttons.
Slow playback
During playback press repeatedly SLOW
button on the RC to select the speed of slow
playback: 1/2 => 1/3 => 1/4 => 1/5 => 1/6 => 1/7
=> Normal. While slow playback, press and hold
6/SET/PAU button on the panel or PLAY/PAUSE
button on the RC to resume normal playback.
PBC (Playback Control) function (for
VCD only)
This function is only available for the VCD
with PBC function. Press and hold MEN/PBC
button on the RC to set PBC on/off; when PBC
is off, the screen will show PBC menu if you
switch PBC on. If the menu consists of a list
of titles, you can select a desired one using
number buttons on the RC.
Changing angle (for DVD only)
Press ANGLE button on the RC to playback
images at different camera angles. If a disc
doesn’t support multi-angle playback, this
function will not work.
Selecting audio language (for DVD
only)
During DVD disc playback, press AUDIO
button on the RC repeatedly to select the audio
language to listen. This function will not work
if a disc does not support multi-language audio.
Selecting subtitle language (for DVD
only)
If your DVD disc supports multi-language
subtitle, press SUB-T button on the RC
repeatedly to switch among disc-supported
languages.
Selecting sound channel
During VCD/CD disc playback repeatedly
press AUDIO button on the RC or press and hold
AUDIO/TYPE/APS button on the panel to select
the channel: Mono left => Mono right => Stereo.
Selecting video system
While video playback, press repeatedly
SYSTEM button on the RC or BND/NP button
on the panel to select the video system (NTSC/
PAL/PAL60/AUTO).
Menu navigation
• Press MEN/PBC button on the RC to
activate the disc menu list on the screen.
Choose the desired item with cursor buttons.
Press ENTER button on the RC or 5/STOP/
ENTER button on the panel to confirm the
selected item and start playing.
• When playing a DVD, press TITLE button
on the RC to go to the title list of the disc.
Title and menu are only available if the
disc has these functions.
ID3 Tag function
If an MP3 file has ID3-tag information in
the supported format, such information will be
displayed while playback.
USB/SD/MMC notes
• USB format supports 2.0. Capacity: up to
32 Gb.
• For correct and satisfactory operation,
17
Operation
licensed SD/MMC memory cards of famous
brands should be used with this unit. Avoid
using memory cards of unknown brands.
Capacity: up to 32 Gb.
Inserting SD/MMC card/USB device
Insert an MMC/SD card or a USB device into
MMC/SD slot or USB slot. Then the playing
mode will be changed into Card or USB mode
automatically. The first card/USB device track
playback will start. If the unit is afterwards
switched to another mode, press MOD/MUT
button on the panel or MODE button on the RC
to select USB or memory card mode.
All the operations with files stored in
a memory card or USB are the same as
described in Disc Operations for file discs.
System setup
Press SETUP button on the RC or 6/SET/
PAU button on the panel to display setup
screen, use UP/DOWN cursor buttons to select
the desired setup page: System, Disc. Press
RIGHT cursor button to go to the selected
page item list. In the selected page select an
item using UP/DOWN cursor buttons, then
press ENTER button on the RC or 5/STOP/
ENTER button on the panel to go to setting list.
Use UP/DOWN cursor buttons to select the
needed setting. Press ENTER button on the
RC or 5/STOP/ENTER button on the panel to
confirm your selection. Press SETUP button on
the RC or 6/SET/PAU button on the panel to go
the previous menu page.
System setup
SETUP MENU
SYSTEM NTSC/PAL
ADJUST
TV RATIO
DISC
NTSC/PAL
Select the TV system in the setting menu
(NTSC, PAL, PAL-60, AUTO).
Adjust
Adjust brightness, contrast, hue, saturation
and sharpness of the image.
TV Ratio
Select TV type to watch wide screen movies.
4:3 PS: For 4:3 TV, left and right edges will
be cut.
4:3 LB: For 4:3 TV, black bars will appear on
top and bottom.
16:9 Wide: For 16:9 wide screen TV.
Disc setup
SETUP MENU
SYSTEM OSD LANG
SUDIO LANG
SUBTITLE LANG
PASSWORD
RATING
DISC
18
Operation
OSD language
Select the language to be used for the on-
screen display.
Audio language
Select the language to be used for the audio.
You can select a preferred audio from those
included on the DVD video disk.
Subtitle language
Select the language to be used for subtitles.
You can select a preferred subtitle from those
included in the DVD Video disk.
Password
Change the password. The initial factory
password is 0000. You can set your own
password. If you forget your own password,
you can use 0000 as general password.
Rating
The control level is for parental to control
playing content and protect your children from
violence and erotic. The disc, the level of which
is higher than the setting level can not be played.
The rating can be selected only under the
password unlocked status, and the limits can be
worked only under the password locked status.
Cleaning the unit body
Wipe with a soft cloth. If the cabinet is very
dampen (not dropping wet) the cloth with a
weak solution of soapy water, and then wipe
clean.
Accessories
1. Receiver
2. Front panel
3. Protective case
4. Remote controller
5. ISO connector
6. Mounting parts:
Nut
Spring washer
Flat washer
Screw M5
Screw M5x5
Metal strap
Release key
7. Instruction manual
8. Warranty card
9. Consumer information
19
General information
Handling compact discs
• Do not insert anything other than a CD into
the CD loading slot.
• Do not use cracked, chipped, warped, or
otherwise damaged discs as they may cause
skipping or noise damage the player.
• Handle the disc only by the edges (as
shown in the picture). To keep discs clean do
not touch its surface.
• Store discs in their cases when not in use.
• Do not expose discs to direct sunlight,
high humidity, high temperature or dust.
• Prolonged exposure to extreme
temperature (such as leaving the discs in your
car during summertime) can wrap a disc.
• Do not attach labels, write on or apply
chemicals to the surface of the discs.
• Do not touch the recorded surface of the
discs.
• Use 12-cm CDs. Use only conventional,
fully circular discs. Do not use shaped discs.
Cleaning discs
Fingerprints should be carefully wiped from
the surface of disc with a soft cloth. Unlike
conventional records, compact discs have no
grooves to collect dust and macroscopic dirt,
so gently wiping them with a soft cloth should
remove must panicles. Wipe in a straight
motion from the center to the edge.
Never use thinner benzine, record cleaner
or anti static spray on a compact disc. Such
chemicals can damage its plastic surface.
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
2 pcs
2 pcs
1 pc
1 pc
1 pc
2 pcs
1 pc
1 pc
1 pc
20 21
General information General information
Troubleshooting
Below is a table describing simple measures that can help you eliminate most problems likely
to emerge when this unit is in use. If below measures do not help, turn to a service center or to the
nearest dealer.
Symptom Cause Solution
No power The car ignition is not on. If the power supply is properly connected
to the car accessory switch the ignition
key to “ACC”.
The fuse is blown. Replace the fuse.
No sound Volume is in minimum. Adjust volume to a desired level.
Wiring is not properly
connected.
Check wiring connection.
Bad sound quality The installation angle is more
than 30 degrees.
Adjust the installation angle to less than
30 degrees.
The disc is extremely dirty or
defective.
Clean the compact disc/try to play a new
one.
Disc cannot be
loaded or ejected
The unit already contains a
disc.
Remove the disc in the player then put a
new one.
Moisture condensation. Leave the unit idle for an hour, then retry.
Disc cannot be
read
The disc is inserted upside
down.
Insert the compact disc with the label
side facing upward.
Compact disc is extremely
dirty or defective.
Clean the disc or try to play a new one.
Temperature inside the car is
too high.
Cool off until the ambient temperature
returns to normal.
Buttons do not
work
The built-in microcomputer is
not operating properly.
Reset the unit with the help of RESET
button.
Front panel is not properly fix
into its place.
Install the front panel properly.
The radio does
not work
The antenna cable is not
connected.
Insert the antenna cable properly.
The radio station
automatic tuning
does not work
The signals are too weak. Select stations manually.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45

Hyundai H-CMD4031 Руководство пользователя

Категория
Мультимедиа-приемники для автомобилей
Тип
Руководство пользователя
Это руководство также подходит для

Задайте вопрос, и я найду ответ в документе

Поиск информации в документе стал проще с помощью ИИ