13
EN
This menu is used to cook cereals such as buckwheat, lentils, rice, etc.
• Place the appliance on a flat, stable, heat-resistant work surface away
from water splashes and any other sources of heat.
• Press “Menu” key and select CEREAL cooking mode.
CEREAL COOKING MODE
* For the CEREAL menu, you can either choose the automatic mode or set
the time by yourself.
To select the cooking time by yourself, once you entered the CEREAL
menu you can press the timer
13c
13b
13a
13h
13j
13k
13l 13n
13o
13d
13e
13f
13i
13m
13g
.
• When the appliance is plugged, the multicooker will directly switch to
the PORRIDGE cooking mode by default. The screen will lighten one
cooking mode after the other for your selection, in this order : Porridge -
> Cereal -> Soup -> Stew - > Steam-> Yogurt
The screen displays the default cooking time of each function, except for
CEREAL cooking mode in automatic mode.
For CEREAL menu, you can choose to launch the automatic cooking mode
or you can choose the manual mode by pressing on the timer. In this case,
the default time will appear on the screen.
If you launch the automatic mode, the screen displays “[-----] ”, as the
cooking time will be adjusted automatically depending on the quantity
of cereals you are cooking). “Start” key light flickers.
PORRIDGE FUNCTION
• Press “Menu” key to select function “Porridge”. The screen displays the
default cooking time, the light of “Start” flickers red.
• You can change the cooking time by pressing “ ” and “ ” keys.
• Press “Start” key. The rice cooker enters into “Porridge” cooking status
with the light of “Start” & “Timer” pictograms lighting up and the screen
displaying the remaining cooking time.
• At the end of cooking, the buzzer will ring five “bip”, the rice cooker will
enter keep warm status with the “Keep Warm”
13c
13b
13a
13h
13j
13k
13l 13n
13o
13d
13e
13f
13i
13m
13g
indicator turning on
and the screen will start to count the time of keeping warm.