Yamaha RX-A1060 Инструкция по применению

AV Receiver

Owner’s Manual

EN

Read the supplied booklet “Safety Brochure” before using the unit.

En 2

CONTENTS

Introduction 5

Accessories................................................................................... 5

About this book ............................................................................ 5

About remote control .................................................................... 5

Batteries ......................................................................................................................................................... 5

Operating range of the remote control......................................................................................................... 5

FEATURES 6

What you can do with the unit ........................................................ 6

Part names and functions .............................................................. 8

Front panel ..................................................................................................................................................... 8

Front display (indicators) ............................................................................................................................ 10

Rear panel..................................................................................................................................................... 11

Remote control ............................................................................................................................................ 13

PREPARATIONS 14

General setup procedure ..............................................................14

1 Connecting speakers ..................................................................15

Basic speaker configuration ........................................................................................................................ 16

Advanced speaker configuration ................................................................................................................ 22

2 Connecting a TV and playback devices .........................................28

Input/output jacks and cables .................................................................................................................... 28

Connecting a TV ........................................................................................................................................... 29

Connecting video devices (such as BD/DVD players) ................................................................................. 31

Connecting audio devices (such as CD players) ......................................................................................... 33

Connecting to the jacks on the front panel ................................................................................................ 34

3 Connecting the FM/AM antennas..................................................35

4 Connecting a network cable or preparing the wireless antenna......36

Connecting the network cable.....................................................................................................................36

Preparing the wireless antenna ...................................................................................................................36

5 Connecting other devices............................................................37

Connecting a device compatible with the trigger function ........................................................................37

6 Connecting the power cable........................................................37

7 Selecting an on-screen menu language ........................................38

8 Configuring the necessary speaker settings..................................39

9 Optimizing the speaker settings automatically (YPAO) ..................40

Measuring at one listening position (single measure) ................................................................................42

Measuring at multiple listening positions (multi measure)........................................................................43

Checking the measurement results .............................................................................................................44

Reloading the previous YPAO adjustments .................................................................................................45

Error messages .............................................................................................................................................46

Warning messages........................................................................................................................................47

10 Connecting to a network device wirelessly .................................48

Selecting the connection method ...............................................................................................................48

Connecting the unit to a wireless network..................................................................................................49

Connecting a mobile device to the unit directly (Wireless Direct) .............................................................54

11 Connecting to the MusicCast network ........................................56

MusicCast CONTROLLER ..............................................................................................................................56

Adding the unit to the MusicCast network ..................................................................................................56

PLAYBACK 57

Basic playback procedure.............................................................57

Selecting an HDMI output jack.....................................................................................................................57

Selecting the input source and favorite settings with one touch

(SCENE) ......................................................................................58

Registering a scene.......................................................................................................................................59

Selecting setting items to be included as scene assignments ...................................................................59

Selecting the sound mode.............................................................60

Enjoying stereoscopic sound fields (CINEMA DSP 3D) ................................................................................61

En 3

Enjoying unprocessed playback.................................................................................................................. 64

Enjoying pure high fidelity sound (Pure Direct).......................................................................................... 65

Playing back digitally compressed formats (such as MP3, etc.) with enriched sound

(Compressed Music Enhancer) .................................................................................................................... 65

Listening to FM/AM radio ..............................................................66

Setting the frequency steps......................................................................................................................... 66

Selecting a frequency for reception............................................................................................................ 66

Registering favorite radio stations (presets) .............................................................................................. 67

Radio Data System tuning ........................................................................................................................... 68

Operating the radio on the TV ..................................................................................................................... 69

Playing back music via Bluetooth ..................................................70

Playing back Bluetooth device music on the unit ...................................................................................... 70

Enjoying audio using Bluetooth speakers/headphones ............................................................................ 71

Playing back music stored on a USB storage device.........................72

Connecting a USB storage device ............................................................................................................... 72

Playback of USB storage device contents .................................................................................................. 72

Playing back music stored on media servers (PCs/NAS) ...................75

Media sharing setup..................................................................................................................................... 75

Playback of PC music contents ................................................................................................................... 76

Listening to Internet radio ............................................................79

Playback of Internet radio ........................................................................................................................... 79

Registering favorite Internet radio stations (bookmarks) ......................................................................... 81

Playing back iTunes/iPod music with AirPlay..................................82

Playback of iTunes/iPod music contents.................................................................................................... 82

Playing back music in multiple rooms (multi-zone).........................84

Multi-zone configuration examples ............................................................................................................ 84

Preparing Zone2........................................................................................................................................... 85

Controlling Zone2 ........................................................................................................................................ 88

Registering favorite items (shortcut) .............................................90

Registering an item ...................................................................................................................................... 90

Recalling a registered item.......................................................................................................................... 90

Controlling the unit from a web browser (web control) ...................91

Top menu screen.......................................................................................................................................... 92

Control screen .............................................................................................................................................. 92

Settings screen............................................................................................................................................. 93

Viewing the current status ............................................................94

Switching information on the front display................................................................................................ 94

Viewing the status information on the TV ...................................................................................................94

Configuring playback settings for different playback sources

(Option menu).............................................................................95

Option menu items.......................................................................................................................................95

CONFIGURATIONS 100

Configuring input sources (Input menu)....................................... 100

Input menu items .......................................................................................................................................100

Configuring the SCENE function (Scene menu) ............................. 102

Scene menu items ......................................................................................................................................103

Configuring sound programs/surround decoders

(DSP Program menu) ................................................................. 105

DSP Program menu items ..........................................................................................................................106

Configuring various functions (Setup menu) ................................ 108

Setup menu items.......................................................................................................................................109

Speaker (Manual Setup) .............................................................................................................................112

Sound ..........................................................................................................................................................116

Video............................................................................................................................................................118

HDMI ............................................................................................................................................................119

Network.......................................................................................................................................................120

Bluetooth ....................................................................................................................................................122

Multi Zone ...................................................................................................................................................123

Function ......................................................................................................................................................126

ECO ..............................................................................................................................................................128

Language.....................................................................................................................................................128

Viewing information about the unit (Information menu) ............... 129

Types of information ..................................................................................................................................129

Configuring the system settings (ADVANCED SETUP menu)............ 131

ADVANCED SETUP menu items ..................................................................................................................131

Changing the speaker impedance setting (SPEAKER IMP.) ......................................................................131

Turning on/off the remote control sensor (REMOTE SENSOR) ................................................................132

Selecting the remote control ID (REMOTE CON AMP) ...............................................................................132

Changing the FM/AM tuning frequency setting (TUNER FRQ STEP).........................................................132

Switching the video signal type (TV FORMAT)...........................................................................................132

Removing the limitation on HDMI video output (MONITOR CHECK) .......................................................133

Selecting the HDMI 4K signal format (4K MODE).......................................................................................133

En 4

Backing up/recovering the settings (RECOV./BACKUP) ........................................................................... 133

Restoring the default settings (INITIALIZE)............................................................................................... 133

Updating the firmware (FIRM UPDATE)..................................................................................................... 134

Checking the firmware version (VERSION) ............................................................................................... 134

Updating the unit’s firmware via the network .............................. 135

APPENDIX 136

Frequently asked questions ........................................................ 136

Troubleshooting ........................................................................ 137

First, check the following:.......................................................................................................................... 137

Power, system and remote control........................................................................................................... 137

Audio........................................................................................................................................................... 138

Video ........................................................................................................................................................... 140

FM/AM radio................................................................................................................................................ 141

Bluetooth.................................................................................................................................................... 142

USB and network ....................................................................................................................................... 143

Error indications on the front display ..........................................145

Glossary .................................................................................... 146

Audio information (audio decoding format) ............................................................................................ 146

Audio Information (Others) ....................................................................................................................... 148

HDMI and video information ..................................................................................................................... 148

Network information ................................................................................................................................. 149

Yamaha technologies................................................................................................................................. 149

Supported devices and file formats ............................................. 150

Supported devices ..................................................................................................................................... 150

File formats................................................................................................................................................. 150

Video signal flow........................................................................ 151

Video conversion table .............................................................................................................................. 151

Multi-zone output ...................................................................................................................................... 152

Information on HDMI..................................................................153

HDMI Control .............................................................................................................................................. 153

Audio Return Channel (ARC)...................................................................................................................... 155

HDMI signal compatibility.......................................................................................................................... 155

Reference diagram (rear panel)................................................... 156

Trademarks............................................................................... 157

Specifications............................................................................ 158

En 5

Introduction

Accessories

Check that the following accessories are supplied with the product.

☐

AM antenna

☐

FM antenna

☐

YPAO microphone

☐

Power cable

☐

Remote control

☐

Batteries (AAA, R03, UM-4) (x2)

☐

CD-ROM (Owner’s Manual)

☐

Easy Setup Guide

☐

Safety Brochure

* One of the above FM antennas is supplied depending on the region of purchase.

* The supplied power cable varies depending on the region of purchase.

About this book

The illustrations of the main unit and remote control used in this manual are of the U.S.A.

model, unless otherwise specified.

In this manual, illustrations of English menu screens are used as examples.

(China, Korea, U.K. and Europe models only)

For information on how to control external devices with the remote control, refer to

“Supplement for Remote Control” on the supplied CD-ROM.

Some features are not available in certain regions.

Due to product improvements, specifications and appearance are subject to change without notice.

This manual explains operations using the supplied remote control.

This manual describes all the “iPod touch”, “iPhone” and “iPad” as the “iPod”. “iPod” refers to

“iPod touch”, “iPhone” and "iPad", unless otherwise specified.

Icons used in this manual

Y

indicates precautions for use of the unit and its feature limitations.

X

indicates supplementary explanations for better use.

About remote control

This section explains how to use the supplied remote control.

Batteries

Insert the batteries the right way round.

Operating range of the remote control

Point the remote control at the remote control sensor on the unit and remain within the

operating range shown below.

30° 30°

Within

6 m (20 ft)

En 6

FEATURES

What you can do with the unit

The unit is equipped with the various useful features.

Connecting various devices (p.28)

A number of HDMI jacks and various input/output jacks on

the unit allow you to connect video devices (such as BD/DVD

players), audio devices (such as CD players), game consoles,

camcorders, and other devices.

Playing back TV audio in surround

sound with a single HDMI cable

connection (Audio Return Channel:

ARC) (p.28)

When using an ARC-compatible TV, you only need one HDMI

cable to enable video output to the TV, audio input from the

TV, and the transmission of HDMI Control signals.

Various wireless connection

methods (p.48)

The unit supports the Wi-Fi feature that allows the unit to

connect to your wireless router (access point) without a

network cable connection. In addition, Wireless Direct

enables connecting a mobile device to the unit directly

without router.

Creating 3-dimensional sound fields

(p.61)

Connecting front presence speakers allows you to create a

natural 3-dimensional sound field in your own room

(CINEMA DSP 3D). Even when no front presence speakers are

connected, the Virtual Presence Speaker (VPS) function

produces 3D surround sound. In addition, the unit creates

Virtual Surround Back Speaker (VSBS) using the surround

speakers to add a sense of depth to the rear sound field even

when no surround back speakers are connected.

HDMI Control

TV audio

Video from external

device

Wi-Fi or

Wireless Direct

VSBS

En 7

Surround playback with 5 speakers

placed in front (p.63)

If you have surround speakers but there is no space to place

them in the rear of your room, you can place them in the

front and enjoy multichannel surround sound with the 5

speakers placed in the front (Virtual CINEMA FRONT).

Home Audio Network with

MusicCast (p.56)

The unit supports the MusicCast feature that allows you to

link a MusicCast compatible device to another device in a

different room and play them back simultaneously, or

control all MusicCast compatible devices with the dedicated

application “MusicCast CONTROLLER”.

Low power consumption (p.128)

The ECO mode (power saving function) reduces the unit’s

power consumption.

Useful applications

The following applications provide you the flexibility to control the unit or assist you with the cable connections.

⬛ AV CONTROLLER

“AV CONTROLLER” will turn your smartphone/tablet into a

Wi-Fi enabled remote control for your Yamaha network

products. This application provides you the flexibility to

control the available inputs, volume, mute, power

commands and playback source.

Functions

• Power on/off and volume adjustment

• Input, scene and sound mode selection

• DSP Parameter adjustment

• Playback control (including music selection for some

sources)

X

For details, search for “AV CONTROLLER” on the App Store or Google

Play.

⬛ AV SETUP GUIDE (for tablet)

“AV SETUP GUIDE” is an application that assists you with

cable connections between AV receiver and source devices

as well as AV receiver setup. This application guides you

through the various settings such as speaker connections,

TV and video/audio device connections and selecting the

speaker system.

Functions

• Connection guide (speakers, TV and video/audio devices)

• Setup guide (YPAO settings and various setup assistance

with illustrations)

• Viewing owner’s manual

X

For details, search for “AV SETUP GUIDE” on the App Store or Google

Play.

En 8

Part names and functions

This section explains the functions of the parts of the unit.

Front panel

a MAIN ZONE z key

Turns on/off (standby) the unit.

b Standby indicator

Lights up when the unit is in standby mode under any of the

following conditions.

• HDMI Control is enabled (p.119)

• Standby Through is enabled (p.120)

• Network Standby is enabled (p.121)

• Bluetooth Standby is enabled (p.122)

c Front display

Displays information (p.10).

d Remote control sensor

Receives remote control signals (p.5).

e PURE DIRECT key

Enables/disables Pure Direct (p.65).

f INPUT knob

Selects an input source.

g Front panel door

For protecting controls and jacks (p.9).

h VOLUME knob

Adjusts the volume.

Opening the front panel door

To use controls or jacks behind the front panel door, gently

press the bottom of the door to open it. Keep the door closed

when not using controls or jacks behind the front panel door.

(Be careful not to trap your fingers.)

INPUT

MAIN ZONE

VOLUME

PURE DIRECT

eb c da

f

h

g

En 9

⬛ Inside of the front panel door

a ON SCREEN key

Displays the on-screen menu on the TV.

b Menu operations keys

Cursor keys: Select a menu or a parameter.

ENTER: Confirms a selected item.

RETURN: Returns to the previous screen.

c OPTION key

Displays the option menu (p.95).

d DISPLAY key

Displays status information on the TV (p.94).

e TONE/BALANCE key

Adjusts the high-frequency range and low-frequency range of

output sounds (p.96).

Adjusts the left/right channel volume balance for Zone2 (p.89).

f STRAIGHT (CONNECT) key

Enables/disables the straight decode mode (p.64).

Enters MusicCast CONTROLLER registration by holding down for 5

seconds (p.56).

g PROGRAM keys

Select a sound program or a surround decoder (p.60).

h SCENE keys

Select the registered input source, sound program, and various

settings with one touch. Also, turns on the unit when it is in

standby mode (p.58).

i MULTI ZONE keys

ZONE 2: Enables/disables the audio output to Zone2 (p.88).

ZONE CONTROL: Changes the zone (main zone or Zone2) that is

controlled by the keys and knobs on the front panel (p.88).

j INFO (WPS) key

Selects the information displayed on the front display (p.94).

Enters the wireless network connection setup (WPS push button

configuration) by holding down for 3 seconds (p.50).

k MEMORY key

Registers FM/AM radio stations as preset stations (p.67).

Registers USB/network contents as shortcuts (p.90).

l FM and AM keys

Switch between FM and AM (p.66).

m PRESET keys

Select a preset FM/AM radio station (p.67).

Selects a USB/network content from shortcuts (p.90).

n TUNING keys

Select the radio frequency (p.66).

o USB jack

For connecting a USB storage device (p.72).

p YPAO MIC jack

For connecting the supplied YPAO microphone (p.40).

q PHONES jack

For connecting headphones.

r VIDEO AUX jacks

For connecting a device, such as a camcorder and a game console

(p.34).

OPTION

ON SCREEN

DISPLAY

RETURN

MULTI ZONE

VIDEO AUX

ZONE 2

ZONE CONTROL

YPAO MIC

PHONES

USB

SILENT CINEMA

VIDEO

TONE/BALANCE

STRAIGHT

(

CONNECT

)

PROGRAM

SCENE

1234

HDMI IN

RL AUDIO

INFO(WPS)

MEMORY

FM AM

TUNING

PRESET

ENTER

5V 1A

a c e f j k mg l ndb

o p q

hi

r

En 10

Front display (indicators)

a HDMI

Lights up when HDMI signals are being input or output.

IN

Lights up when HDMI signals are being input.

OUT1/OUT2

Indicates the HDMI OUT jacks currently outputting an HDMI signal.

b ECO

Lights up when the unit is in the eco mode (p.128).

c Signal strength indicator

Indicates the strength of the wireless network signal (p.48).

d ZONE2

Lights up when Zone2 is enabled (p.88).

e SLEEP

Lights up when the sleep timer is on.

f Information display

Displays the current status (such as input name and sound mode

name). You can switch the information by pressing INFO (p.94).

g MUTE

Blinks when audio is temporarily muted.

h Volume indicator

Indicates the current volume.

i VIRTUAL

Lights up when the Virtual Presence Speaker (VPS) or Virtual

Surround Back Speaker (VSBS) (p.61), or the virtual surround

processing (p.63) is working.

j Bluetooth indicator

Lights up when the unit is connecting to a Bluetooth device (p.70).

k ENHANCER

Lights up when Compressed Music Enhancer (p.65) is working.

l CINEMA DSP

Lights up when CINEMA DSP (p.61) is working. “CINEMA DSP n”

lights up when CINEMA DSP 3D (p.61) is activated.

m STEREO

Lights up when the unit is receiving a stereo FM radio signal.

TUNED

Lights up when the unit is receiving an FM/AM radio station signal.

n PARTY

Lights up when the unit is in the party mode (p.89).

o Cursor indicators

Indicate the remote control cursor keys currently operational.

p ADAPTIVE DRC

Lights up when Adaptive DRC (p.96) is working.

q Speaker indicators

Indicate speaker terminals from which signals are output.

A Front speaker (L)

S Front speaker (R)

D Center speaker

F Surround speaker (L)

G Surround speaker (R)

H Surround back speaker (L)

J Surround back speaker (R)

K Surround back speaker

B Front presence speaker (L)

N Front presence speaker (R)

L Subwoofer

OUT

213

IN

VOLUME

MUTE

ADAPTIVE DRC VIRTUAL

3

ZONE

ECO

2

SBL SBRSB

SL

SW

SR

FPL

CL R

FPR

ENHANCER

PARTY

STEREO TUNED

SLEEP

ZONE

3

ZONE

4

m

i

hg

lj oqon

a

f

edbc

pk

En 11

Rear panel

(U.S.A. model)

* The area around the video/audio output jacks is marked in white on the actual product to prevent improper

connections.

HDMI OUT

ARC

(ZONE OUT)

1

2

HDMI

(1 BD/DVD)

AV 1 AV 2 AV 3 AV 4

(HDCP2.2)

AV 5 AV 6 AV 7

IN OUT

REMOTE

R

L

AV 1 AV 2 AV 3 AV 4

AUDIO 1 AUDIO 2 AUDIO 3

(2 TV)

(1 BD/DVD)

OPTICAL

4

OPTICAL

3

COAXIAL COAXIAL

2

COAXIAL

1

PHONO

GND

AC IN

FM

75ȍ

ANTENNA

(

4 RADIO

)

OPTICAL

1

2

ZONE OUT

ZONE 2

SPEAKERS

CENTER FRONTSURROUND BACKSURROUND

F.PRESENCE

R

5

6

L R R RL L L

ZONE 2

SINGLE

ZONE 2/BI-AMP

AM

PRE OUT

SUBWOOFER

CENTER

FRONT

SURROUND SUR. BACK

(SINGLE)

EXTRA SP1EXTRA SP2

RS-232C

TRIGGER

OUT

1

2

12V 0.1A

MAX. TOTAL

NETWORK

( 3

NET

)

Y

P

B

P

R

P

R

P

B

Y

P

R

P

B

YP

R

P

B

AV 1

COMPONENT VIDEO

A

AV 3

C

AV 2

B

MONITOR OUT/

ZONE OUT

Y

WIRELESS

(HDCP2.2)

qo rp

a d jc e nh i lgfb

mk

En 12

a PHONO jacks

For connecting to a turntable (p.33).

b AUDIO 1-3 jacks

For connecting to audio playback devices and inputting audio signals (p.33).

c AV 1-4 jacks

For connecting to video/audio playback devices and inputting video/audio signals (p.31).

d HDMI OUT 1 jack

For connecting to an HDMI-compatible TV and outputting video/audio signals (p.28). When using ARC, TV

audio signal can also be input through the HDMI OUT 1 jack.

HDMI OUT 2 (ZONE OUT) jack

For connecting to an HDMI-compatible TV and outputting video/audio signals (p.31), or for connecting to

an HDMI-compatible device used in Zone2 (p.86).

e MONITOR OUT/ZONE OUT component/composite video jacks

For connecting to a TV that supports component or composite video and outputting video signals (p.30)

or for connecting to a Zone2 video monitor (p.86).

f HDMI (AV 1-7) jacks

For connecting to HDMI-compatible playback devices and inputting video/audio signals (p.31).

g COMPONENT VIDEO (AV 1-3) jacks

For connecting to video playback devices that support component video and inputting video signals

(p.32).

h TRIGGER OUT 1-2 jacks

For connecting to devices that support the trigger function (p.37).

i REMOTE IN/OUT jacks

For connecting to an infrared signal receiver/emitter that allows you to operate the unit and other

devices from another room (p.87).

j NETWORK jack

For connecting to a network with a network cable (p.36).

k Wireless antenna

For connecting to a network device wirelessly (p.48).

l RS-232C terminal

This is a control expansion terminal for custom installation. Consult your dealer for details.

m VOLTAGE SELECTOR

(Brazil and General models only)

Selects the switch position according to your local voltage (p.37).

n AC IN jack

For connecting the supplied power cable (p.37).

o ANTENNA jacks

For connecting to FM and AM antennas (p.35).

p ZONE OUT jacks

For connecting to the external amplifier used in Zone2 and for outputting audio (p.85).

q SPEAKERS terminals

For connecting to speakers (p.15).

r PRE OUT jacks

For connecting to a subwoofer with built-in amplifier (p.20) or to an external power amplifier (p.27).

En 13

Remote control

a Remote control signal transmitter

Transmits infrared signals.

b z (receiver power) key

Turns on/off (standby) the unit.

c Input selection keys

Select an input source for playback.

AV 1-7: AV 1-7 jacks

V-AUX: VIDEO AUX jacks (on the front panel)

AUDIO 1-3: AUDIO 1-3 jacks

PHONO: PHONO jacks

TUNER: FM/AM radio

BLUETOOTH: Bluetooth connection

(the unit as a Bluetooth receiver)

USB: USB jack (on the front panel)

NET: NETWORK sources

(press repeatedly to select a desired network source)

d MAIN/ZONE2 switch

Changes the zone (main zone or Zone2) that is controlled by the

remote control (p.88).

e SCENE keys

Select the registered input source, sound program, and various

settings with one touch. Also, turns on the unit when it is in

standby mode (p.58).

f PROGRAM keys

Select a sound program (p.60).

g External device operation keys

Displays menus for the HDMI Control-compatible playback device

(p.153).

h ON SCREEN key

Displays the on-screen menu on the TV.

i Menu operation keys

Cursor keys: Select a menu or the parameter.

ENTER: Confirms a selected item.

RETURN: Returns to the previous screen.

j Radio keys

Operate the FM/AM radio when “TUNER” is selected as the input

source (p.66).

BAND: Switches between FM and AM radio.

PRESET: Select a preset station.

TUNING: Select the radio frequency.

External device operation keys

Let you perform playback operations when “USB” or “NET” is

selected as the input source, or control playback of the HDMI

Control-compatible playback device (p.153).

k Sound mode keys

Select a sound mode (p.60).

l INFO key

Selects the information displayed on the front display (p.94).

m SLEEP key

Pressing this key repeatedly will specify the time (120 min, 90 min,

60 min, 30 min, off), in which the unit switches to the standby

mode.

n Numeric keys

Let you enter numerical values, such as radio frequencies.

MEMORY key

Registers FM/AM radio stations as presets (p.67).

o HDMI OUT key

Selects HDMI OUT jacks to be used for video/audio output (p.57).

p PARTY key

Turns on/off the party mode (p.89).

q VOLUME keys

Adjust the volume.

r MUTE key

Mutes the audio output.

s OPTION key

Displays the option menu (p.95).

t DISPLAY key

Displays status information on the TV (p.94).

X

(China, Korea, U.K. and Europe models only)

For information on the keys other than those above, refer to

“Supplement for Remote Control” on the supplied CD-ROM.

ENTER

RETURN

POP-UP/MENU

TOP MENU

321

AUDIO

2 431

6

V-AUX

75

AV

BLUETOOTH

NET

PHONO

USB

TUNER

4321

8765

9 0

4

RADIO

3

NET

2

TV

1

BD/DVD

SCENE

MUTE

OPTION

ON

SCREEN

DISPLAY

MODE

MOVIE MUSIC

INFO SLEEP

ENT

PRESETTUNING

VOLUME

PROGRAM

HDMI OUTPARTY

BAND

SUR. DECODE

STRAIGHT

ENHANCER PURE DIRECT

MEMORY

MAIN

ZONE 2

p

r

o

s

t

a

c

b

e

d

f

q

g

n

m

h

j

k

l

i

(U.S.A. model)

En 14

PREPARATIONS

General setup procedure

1 Connecting speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.15)

2 Connecting a TV and playback devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.28)

3 Connecting the FM/AM antennas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.35)

4 Connecting a network cable or preparing the wireless antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.36)

5 Connecting other devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.37)

6 Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.37)

7 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.38)

8 Configuring the necessary speaker settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.39)

9 Optimizing the speaker settings automatically (YPAO). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.40)

10 Connecting to a network device wirelessly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.48)

11 Connecting to the MusicCast network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.56)

This completes all the preparations. Enjoy playing movies, music, radio and other content with the unit!

En 15

1 Connecting speakers

The unit has 7 built-in amplifiers. You can connect 2 to 9 speakers and up to 2 subwoofers to create the favorite acoustic space in your room.

You can also apply bi-amp connections, channel expansion (using an external power amplifier) or multi-zone configurations to enhance your system (p.22).

Ideal speaker layout Functions of each speaker

X

• We recommend using front presence speakers to have a full effect of the 3-dimensional sound fields. However,

the unit creates Virtual Presence Speaker (VPS) using the front, center and surround speakers to produce

3-dimensional sound fields even when no front presence speakers are connected (p.61).

• Use “Ideal speaker layout” (diagram on the right) as reference. You do not need to exactly adjust the speaker

layout to this diagram since the YPAO function of the unit will automatically optimize the speaker settings (such

as distances) to suit the speaker layout.

• When using only one surround back speaker, place it straight behind the listening position (middle of “SBL”

and “SBR” in the diagram).

Caution

Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. In this case, you can also use 4-ohm speakers as the front speakers.

For details, see “Setting the speaker impedance” (p.19).

E

12

3

9

4

67

5

9

R

0.3 m (1 ft) or more

1.8 m

(5.9 ft)

0.5 to 1 m

(1.6 to 3.3 ft)

1.8 m

(5.9 ft)

0.5 to 1 m

(1.6 to 3.3 ft)

10°~30°10°~30°

Speaker type Function

Front (L/R)

1 2

Produce front left/right channel sounds (stereo sounds).

Center 3 Produces center channel sounds (such as movie dialogues and vocals).

Surround (L/R)

4 5

Produce surround left/right channel sounds. Surround speakers also produce

surround back channel sounds when no surround back speakers are connected.

Surround back (L/R)

6 7

Produce surround back left/right channel sounds.

Front presence (L/R)

E R

Produce CINEMA DSP effect sounds or heights channel sounds of Dolby Atmos

and DTS:X contents.

Subwoofer 9

Produces LFE (low-frequency effect) channel sounds and reinforces bass parts of

other channels.

This channel is counted as “0.1”. You can connect 2 subwoofers to the unit and

place them on the left/right (or front/rear) sides of the room.

En 16

Basic speaker configuration

If you do not apply bi-amp connections, channel expansion (using an external amplifier) or multi-zone configurations, follow the procedure below to place the speakers in your room and connect

them to the unit.

⬛ Placing speakers in your room

Depending on the number of speakers, place the speakers and subwoofer in your room. This

section describes the representative speaker layout examples.

X

• To have a full effect of Dolby Atmos contents, we recommend using a speaker system with a ★ mark. However,

you can also play back Dolby Atmos contents with the 7.1 system (using surround back speakers).

• To have a full effect of DTS:X contents, we recommend using a speaker system with a ★ mark.

• (About the number of channels) For example, “5.1.2” denotes “standard 5.1-channel plus 2 for overhead

speaker channels”. For details on how to place overhead speakers (presence speakers), see “Presence speaker

layout” (p.18).

7.1/5.1.2 system [★]

(using both surround back and front presence speakers)

This speaker system brings out the full performance of the unit and allows you to enjoy a

highly-natural 3-dimensional sound field with any contents.

X

• The surround back speakers and front presence speakers do not produce sounds simultaneously. The unit

automatically changes the speakers to be used, depending on the input signal and CINEMA DSP (p.61).

• When using front presence speakers installed to the ceiling or when using the Dolby Enabled speakers as the

presence speakers, configure the “Layout (Front Presence)” setting in the “Setup” menu before performing

YPAO (p.39).

5.1.2 system [★] (using front presence speakers)

This speaker system uses the front presence speakers to produce a natural 3-dimensional

sound field, and also creates Virtual Surround Back Speaker (VSBS) using the surround

speakers to add a sense of depth to the rear sound field. This system is suited for enjoying not

only 5.1-channel but also for 7.1-channel contents.

X

When using front presence speakers installed to the ceiling or when using the Dolby Enabled speakers as the

presence speakers, configure the “Layout (Front Presence)” setting in the “Setup” menu before performing YPAO

(p.39).

En 17

7.1 system (using surround back speakers)

This speaker system creates Virtual Presence Speaker (VPS) using the front, center and

surround speakers to produce a 3-dimensional sound field, and also allows you to enjoy

extended surround sounds using the surround back speakers.

5.1 system

X

You can enjoy surround sound even without the center speaker (4.1 system).

5.1 system (front 5.1-channel) (using surround speakers)

We recommend using this speaker system when you cannot place speakers in the rear side of

the room.

X

When placing surround speakers in the front side, set “Layout (Surround)” in the “Setup” menu to “Front” before

performing YPAO (p.39).

5.1 system (front 5.1-channel) (using front presence speakers)

We recommend using this speaker system when you cannot place speakers in the rear side of

the room.

X

When using front presence speakers installed to the ceiling or when using the Dolby Enabled speakers as the

presence speakers, configure the “Layout (Front Presence)” setting in the “Setup” menu before performing YPAO

(p.39).

45

12

39

1

2

39

ER

En 18

2.1 system

X

Add the center speaker to configure a 3.1 system.

Presence speaker layout

The unit provides three layout patterns for presence speakers (Front Height, Overhead and

Dolby Enabled SP). Choose a layout pattern that suits your listening environment.

X

You can enjoy Dolby Atmos, DTS:X or Cinema DSP 3D with any layout pattern.

Front Height

Install the presence speakers on the front side wall.

It delivers a natural sound field with excellent linkage of left, right, top and bottom sound

spaces, and sound extensity effectively.

Overhead

Install the presence speakers to the ceiling above the listening position.

It delivers realistic overhead sound effects and sound field with excellent linkage of front and

rear sound spaces effectively.

Y

For details on the installation position of ceiling speakers, see “Notes on installation of ceiling speakers” (p.19).

Dolby Enabled SP

Use the Dolby Enabled speakers as the presence speakers.

It utilizes sounds reflected from ceiling and lets you enjoy overhead sounds only from speakers

that are placed at the same level as traditional speakers.

X

Place the Dolby Enabled speakers on top of or near the traditional front speakers. A Dolby Enabled speaker unit

may be integrated into a traditional speaker. For details, refer to the instruction manual of the Dolby Enabled

speakers.

En 19

Notes on installation of ceiling speakers

When installing presence speakers to a ceiling, install them just above the listening position,

or the ceiling between the extensions of the front speakers and listening position.

⬛ Setting the speaker impedance

Under its default settings, the unit is configured for 8-ohm speakers. When using a 6-ohm

speaker for any channel, set the speaker impedance to “6 Ω MIN”. In this case, you can also use

4-ohm speakers as the front speakers.

1

Before connecting speakers, connect the power cable to an AC wall outlet.

2

While holding down STRAIGHT on the front panel, press MAIN ZONE z.

3

Check that “SPEAKER IMP.” is displayed on the front display.

4

Press STRAIGHT to select “6 Ω MIN”.

5

Press MAIN ZONE z to set the unit to standby mode and remove the power

cable from the AC wall outlet.

You are now ready to connect the speakers.

Caution

Be sure to use speakers that are made for ceiling use and take anti-drop measures. Ask a qualified

contractor or dealer personnel for installation works.

SBR

SBL

SL

SRFPR

FPL

FR

FL

C

MAIN ZONE z STRAIGHT

¡¡¡¡¡¡¡¡¡8¬MIN

SPEAKER¡IMP.

En 20

⬛ Connecting speakers

Connect the speakers placed in your room to the unit.

Precaution for connecting of the speaker cables

Improper connecting of the speaker cables may cause short circuit and also damage the unit

or the speakers.

• Remove the unit’s power cable from an AC wall outlet and turn off the subwoofer before

connecting the speakers.

• Twist the bare wires of the speaker cables firmly together.

• Do not let the bare wires of the speaker cable touch one another.

• Do not let the bare wires of the speaker cable come into contact with the unit's metal parts

(rear panel and screws).

If “Check SP Wires” appear on the front display when the unit is turned on, turn off the unit, and

then check the speaker cables short circuit.

Speakers to be connected

If you have nine speakers, you can connect the both surround back speakers and front

presence speakers. In this case, the unit automatically changes the speakers to be used,

depending on the input signal and CINEMA DSP.

If you have seven speakers, use two of them as surround back speakers (*1) or front presence

speakers (*2).

If you have five speakers, use two of them as surround speakers (*3) or front presence speakers

(*4).

X

• You can also connect up to 2 subwoofers (with built-in amplifier) to the unit.

• When apply this speaker configuration, set “Power Amp Assign” (p.112) to “Basic” (default).

• To use an external power amplifier (Hi-Fi amplifier, etc.) to enhance speaker output, see “Connecting an

external power amplifier” (p.27).

Cables necessary for connection (commercially available)

Speaker cables (x the number of speakers)

Audio pin cable (two for connecting two subwoofers)

Speaker type

Speaker system

(the number of channels)

7.1/5.1.2 5.1 2.1

Front (L/R) 1 2 ⚫⚫⚫

Center 3 ⚫⚫

Surround (L/R) 4 5 ⚫⚪*3

Surround back (L/R) 6 7 ⚪*1

Front presence (L/R) E R ⚪*2 ⚪*4

Subwoofer 9 ⚫⚫⚫

–

+

–

+

Страница загружается ...

Yamaha RX-A1060 Инструкция по применению

Yamaha RX-A1060 Инструкция по применению

на других языках

Похожие модели бренда

Модели других брендов