12
CONTROL PANEL
1. START KEY
• Press to start the cooking process.
2. MENU KEY
• Under standby status, press the <Menu> key to cycle through the
following functions: Baking Soup Steam Rice Yogurt
Dessert Reheat Stew/Slow Cook Pilaf/Risotto Porridge
Crust/Fry Pasta Jam.
• The screen displays the default cooking time of each function (except
Rice, Pilaf/Risotto). “Start” button light flashes and the linked function
lights up.
Note:
You can long press the “Menu” key to cancel the “beep” sound if needed
(until the long beep sound). If you want to start the beep sound again,
press the “Menu” key for a second time.
3. “Preset/ Timer” KEY
• Timer: You can adjust the cooking time (except Rice, Pilaf/Risotto), when
you select a cooking mode, the default cooking time will be shown on
the digital display. Press the “Preset/Timer” key once (the timer indicator
will turn on), and then use the +/- buttons to adjust the cooking time.
• Preset: The preset time corresponds to the time for end of cooking,
except Crust/Fry, Yogurt, Reheat. After selecting the desired cooking
mode, press the “Preset/Timer” key button twice (the preset indicator
will turn on), and then use the +/- button to set the timer. Cooking will
begin after the preset time has elapsed.
• When you have chosen the required preset time, press the “Start” key to
enter cooking status, “start” indicator will light up the screen will display
the desired cooking time and the preset pictogram will light up.
• When the Multicooker begins the cooking mode, the preset pictogram
light will turn off and the timer pictogram will light up.
• The maximum start delay is 24 hours. If the preset time is shorter than
the cooking time, cooking will start immediately.
4. “+/-” KEYS
• Use these buttons to adjust the cooking time (+/- 1, 5 or 15 mins) and
preset time (+/- 5 mins). You cannot adjust the cooking time in “Rice,