2 3
Table of contents Table of contents
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.
12
12
13
13
13
13
13
13
13
14
14
14
14
14
14
15
15
15
15
15
15
15
15
15
15
16
16
16
16
16
16
16
16
16
16
17
17
17
Table of contents
Before you start
Utilization of the product
Important safeguards
Installation/Connection
Installation
General notes
Din Front/Rear-Mount
1. DIN front-mount (Method A)
Dismantling the unit
Trim frame installation
2. DIN rear-mount (Method B)
Detachable control panel
Anti-theft system
Connection
Connection diagram
ISO connection table
Using the ISO connector
Parking wire connection
Operation
Control elements
Front panel
Inner panel
Remote controller
Changing battery
General operations
Reset the unit
Turning the unit on/off
Mode selection
Mute function
Volume control
Setting the sound characteristics
System setup
Subwoofer
AV in jack
Radio operations
Band selection
Manual/Automatic tuning
2
4
4
4
5
5
5
5
5
6
6
6
6
6
7
7
7
8
8
9
9
9
9
10
10
11
11
11
11
11
11
11
11
12
12
12
12
12
Programming stations
Auto memory store/preset scan
Stereo/mono reception
On-screen display
RDS background
AF (Alternative Frequencies) function
TA (Traffic Alarm)/TP function
PTY (Program Type)
Other functions
Disc/USB/SD/MMC operations
USB/SD/MMC notes
Insert/Eject disc
Inserting a memory card/USB device
Play/pause
MP3/DivX/JPEG file playback
Stop playback
Selecting tracks
Fast forward/rewind
A-B segment repeat
Repeat playback
Intro playback
Goto
Random playback
Programming playback
OSD function
Zooming in/out
PBC function
Changing angle
Selecting audio language
Selecting subtitle language
Selecting sound channel
Menu navigation
ID3 tag information
System setup
System setup
Language setup
Audio setup
Video setup
Downloaded from Caradio-Manual.com Manuals
4
Before you start
If you want to dispose this product, do not mix it with general household waste. There is
a separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling.
Please contact your local authorities for the correct method of disposal. By doing so, you
will ensure that your disposed product undergoes the necessary treatment, recovery and
recycling and thus prevent potential negative effects on the environment and human health.
Utilization of the product
Important safeguards
• Read carefully through the manual to
familiarize yourself with this unit.
• Keep this manual handy as a reference
for operating procedures and precautions. Do
not allow persons who have not read through
this manual to use this unit.
• “CLASS 1 LASER PRODUCT”
This product contains a laser diode of
higher class than 1. Laser beams from the
optical pickup are dangerous to the eyes. To
ensure continued safety, do not remove any
covers or attempt to gain access to the inside
of the product. Refer all servicing to qualified
personnel.
• Do not allow this unit to come into contact
with liquids. Electrical shock could result. Also,
damage to this unit, smoke, and overheating
could result from contact with liquids or dust.
Protect this unit from moisture.
• Make sure that foreign objects do not get
inside the unit; they may cause malfunctions,
or create safety hazards such as electrical
shock or laser beam exposure.
• The beginning of operation is the moment
of the unit installation. Before use the device
in winter it is recommended to heat up the
passenger compartment during 20 seconds or
to the operation temperature.
• Using the unit with the temperature that
goes beyond the operation temperature greatly
decreases the operation resource of the screen
and other components of the unit and can
result in an outage.
• Disconnect the vehicle’s negative battery
terminal while mounting and connecting the
unit.
• The unit is designed for negative
terminal of the battery, which is connected
to the vehicle metal. Please ensure it before
installation.
• When replacing the fuse, be sure to use
one with an identical amperage rating. Using a
fuse with a higher amperage rating may cause
serious damage to the unit.
• Do not allow the speaker wires to be
shorted together when the unit is switched
on. Otherwise it may overload or burn out the
power amplifier.
• Make sure you disconnect the power
supply and aerial if you will not be using
the system for a long period or during a
thunderstorm.
• Make sure you disconnect the power
supply if the system appears to be working
incorrectly, is making an unusual sound, has
a strange smell, has smoke emitting from it
or liquids have got inside it. Let a qualified
technician check the system.
• Always keep the volume low enough so that
you can hear sounds from outside the vehicle.
• Should this product fail to operate
properly, contact your dealer or nearest service
center.
Downloaded from Caradio-Manual.com Manuals
5
Installation/Connection
Installation
General notes
• Choose the mounting location where the
unit will not interfere with the normal driving
function of the driver.
• Before finally installing the unit, connect
the wiring and make sure that the unit works
properly.
• Consult with your nearest dealer if
installation requires the drilling of holes or other
modifications of the vehicle.
• Install the unit where it does not get in the
driver’s way and cannot injure the passenger if
there is a sudden stop, like an emergency stop.
• If installation angle exceeds 30° from
horizontal, the unit may not perform properly.
• Avoid installing the unit where it would
be subject to high temperature, such as from
direct sunlight, or from hot air, from the heater,
or where it would be subject to dust, dirt or
excessive vibration.
Din Front/Rear-Mount
This unit can be properly installed either
from ‘Front’ (conventional DIN Front-mount) or
‘Rear’ (DIN Rear-mount installation, utilizing
threaded screw Holes at the sides of the unit
chassis). For details, refer to the following
illustrated installation methods.
1. DIN front-mount (Method A)
1. Car dashboard
2. Sleeve
3. Screw
4. Nut (5 mm)
5. Spring washer
6. Screw (5 х 25 mm)
7. Metal strap
8. Flat washer
3
2
1
182
53
1. Install the sleeve into the dashboard;
ensure it is installed with the correct side and
there are no obstacles (wires, dashboard
elements, etc) for the unit installation.
2. After installing the sleeve into the
dashboard, bend tabs fitting to the size of the
dashboard to fix the sleeve in place.
3. Use the metal strap to fix the rear side of
the unit. Determine a place for fixing and install
the strap as shown in the picture. You can bend
the strap to the needed angle with your hands.
4. Make the necessary wire connections.
Ensure the connections are correct.
5. Install the unit into the sleeve until the side
locks are fixed.
3
5
4
6
8
1
7
Dismantling the unit
a – Trim frame
b – Frame uninstall direction
c – Release key insertion
Downloaded from Caradio-Manual.com Manuals
6
Installation/Connection
в
б
а
1. Switch off the unit and detach the front
panel.
2. Insert your fingers into the groove in the
front side of the trim frame (apply some effort to
detach the frame). Pull the frame to detach it.
3. Insert the supplied release keys into the
both sides of the unit body to click, as shown
in the picture. To extract the unit from the
dashboard, pull the release keys or the unit
body to pull it out. Before detaching the unit,
ensure it is not fixed with the metal strap.
Trim frame installation
To install the trim frame, press it to the unit
body and push it to fix it in place. This should
be done before installing the front panel;
otherwise you are not able to install the trim
frame. When the trim frame being installed,
the side with the groove should face down and
fixed first.
2. DIN rear-mount (Method B)
For this method, use the screw holes in the
lateral sides of the unit. Fix the unit with the
help of the factory radio mounting brackets.
1. Select a position in which the screw holes
of the brackets (3) are aligned with the screw
holes in the unit body, and screw in two screws
(2) in each side.
2. Screw.
3. Factory radio mounting brackets.
4. Vehicle dashboard.
5. Lock (remove this part).
The outer trim frame and mounting
sleeve are not used for method of installation.
2
2
5
5
4
3
Detachable control panel
Insert the left locker on the receiver into the
left groove of the panel, and then insert the
right locker into the right groove. Lift the panel
and press on the upper part of the panel until a
click. Ensure the panel is fixed properly.
To detach the front panel, press OPEN
button. When the panel is in horizontal
position, detach the left part of the panel from
the locker, and then detach the right part.
The control panel can easily be
damaged by shocks. After removing it, place
it in a protective case and be careful not to
drop it or subject it to strong shocks. The rear
connector that connects the main unit and the
control panel is an extremely important part. Be
careful not to damage it by pressing on it with
fingernails, pens, screwdrivers, etc.
If the control panel is dirty, wipe off the
dirt with soft, dry cloth only. And use a cotton
swab soaked in isopropyl alcohol to clean the
socket on the back of the control panel.
Anti-theft system
The front panel of this unit can be stored in
the included protective case when not in used
and carried away when you leave the vehicle
to deter theft.
Switch off the power of the unit. Detach the
front panel, then put it to the protective case
and take it with you.
Downloaded from Caradio-Manual.com Manuals
7
Installation/Connection
Connection
Connection diagram
ISO connection table
Location Function
Connector A Connector B
1 - Rear right (+) - Purple
2 - Rear right (-) - Purple/Black
3 - Front right (+) - Grey
4 Battery +12V/Yellow Front right (-) - Grey/Black
5 Power antenna/Blue Front left (+) - White
6 - Front left (-) - White/Black
7 Ignition key (+12V)/Red Rear left (+) - Green
8 Ground/Black Rear left (-) - Green/Black
Power antenna wire is intended for power supply of the antenna and for remote control of
an additional amplifier.
1
1
3
3
5
5
7
7
2
2
4
4
6
6
8
8
Parking wire (brown)
Video out (yellow) Subwoofer out
ISO connector
Line out RCA (red=right)
Antenna jack
Fuse 15 A
Line out RCA (white=left)
Downloaded from Caradio-Manual.com Manuals
8 9
Installation/Connection Operation
Using the ISO Connector
1. If your car is equipped with the ISO
connector, then connect the ISO connectors as
illustrated.
2. For connections without the ISO
connectors, check the wiring in the vehicle
carefully before connecting, incorrect connection
may cause serious damage to this unit.
Cut the connector, connect the colored leads
of the power cord to the car battery as shown
in the colour code table above for speaker and
power cable connections.
Parking wire connection
Parking brake lead
Brake light
Car frame
Battery
Brown Wire
If Parking cable is connected to hand brake
switch, the video display of the TFT monitor
will be controlled by driving status. When the
car is moving ahead, if the video disc is played,
the screen shows worning and blank screen.
The warning screen will prevent the driver from
watching images.
1 2
Downloaded from Caradio-Manual.com Manuals
8 9
Installation/Connection Operation
Control elements
Front panel
1. POWER/MUTE button
2. MENU button
3. MODE button
4. BAND button
5. OK button/VOLUME knob
6. DSP button
7. AS/PS button
1 2 3 4 5 6 7 8 9 10
11 12 13 14
8. Display
9. IR sensor
10. OPEN button
11. SEEK-
/SEEK+ buttons
12. MEM/ button
13. AV input
14. USB port
Inner panel
1 2 3 4 5
1. Memory card slot
2. Eject button
3. Panel status indicator
4. RESET button (hole)
5. Disc loading slot
Pressing RESET hole will erase the clock
setting and stored stations.
Panel status indicator lights up when you flip
down the panel and flashes when you remove
the panel.
Downloaded from Caradio-Manual.com Manuals
10
Operation
Remote controller
1
2
3
4
5
6
7
8
9
10
16
17
18
19
20
21
22
23
24
25
26
27
28
29
11
12
13
14
15
1. POWER button
2. MODE button
3. UP cursor button
4. BND/RDM button
5. ENTER button
6. LEFT cursor button
7. DOWN cursor button
8. STEREO/MONO button
9. PTY/PROG button
10. P.SCN/RPT button
11. SEEK- button
12. AF/TA button
13. OSD button
14. /PBC button
15. Number buttons
16.
button
17. MUTE button
18. MENU button
19. SUB-T button
20. RIGHT cursor button
21. SETUP button
22. ANGLE button
23. INT button
24. VOL+ button
25. A-B/ZOOM button
26. SEL button
27. SEEK+ button
28. VOL- button
29. AUDIO/GOTO button
Changing the battery
1. Press the catch and at the same time pull
out the battery tray.
2. Insert the 1 x lithium battery, type CR
2025 3 V with (+) mark facing up. Insert the
battery tray into the remote control.
• Store the battery where children
cannot reach. If a child accidentally swallows
the battery, consult a doctor immediately.
• Do not recharge, short, disassemble or
heat the battery or dispose it in a fire.
• Do not expose or bring into contact the
battery with other metallic materials. Doing this
may cause the battery to give off heat, crack or
start a fire.
• When throwing away or saving the battery,
wrap it in tape and insulate; otherwise, the
battery may give off heat, crack or start a fire.
• Please direct the Remote controller to the
IR sensor of the front panel.
Downloaded from Caradio-Manual.com Manuals
11
Operation
VOLUME knob on the panel to select the audio
setting item. Press ENTER button or RIGHT
cursor button on the RC or OK button on the
panel to enter the selected item.
Press LEFT/RIGHT buttons on the RC or
rotate VOLUME knob on the panel to adjust the
audio setting. Press SEL button on the RC again
to save the setting and return to current mode.
If turn off the power, all the settings
of each mode will be saved. If turn off the
ACC power, all the settings will be clear and
become factory default setting. If you don’t
adjust setting within several seconds after
selecting the desired setting item, the unit will
automatically return to the current mode.
System setup
Press MENU button on the panel or RC to
enter Setting Menu. Press UP/DOWN cursor
buttons on the RC or rotate VOLUME knob on
the panel to select a menu page. Press ENTER
button or RIGHT cursor button on the RC or
press OK button on the panel to enter the page.
Press UP/DOWN cursor buttons on the RC or
rotate VOLUME knob on the panel to select an
item, then press ENTER button on the RC or OK
button on the panel to adjust the setting.
Press MENU button to return to the last
setting list.
AUDIO MENU
• Bass: Support 10 levels. Default level is 0.
• Treble: Support 10 levels. Default level is 0.
• Balance: Support 10 levels for each left
and right channel. Default is left equal to right.
• Fader: Support 10 levels for each front and
rear channel. Default is front equal to rear.
• EQ DSP: FLAT => CLASSICS => POP
=> ROCK => DSP OFF. You can also select a
DSP mode by pressing repeatedly DSP button
on the front panel.
PICTURE MENU (available in DVD/USB/
Card modes only)
• Red: Adjust level of red color. Support 50
levels. Default level is 25.
• Green: Adjust level of green color. Support
50 levels. Default level is 25.
• Blue: Adjust level of blue color. Support 50
General operations
Reset the unit
Operating the unit for the first time or after
replacing the car battery, you must reset the
unit. Press RESET button (hole) with a pointed
object (such as a ballpoint pen) to set the unit
to initial state.
When some errors occur, you can also
press RESET button to resume to normal,
and it will erase the clock setting and some
memorized functions.
Turning the unit on/off
Press any button on the panel or the RC
(except OPEN button) to turn on the unit. Press
and hold POWER/MUTE button on the panel
or press POWER button on the RC to turn off
the unit.
Mode selection
Repeatedly press MODE button on the RC
or on the panel to select a mode: Tuner =>
DVD => USB => Card => AV IN.
The DVD, Card and USB modes are
only available when corresponding storages
are inserted into the unit.
Mute function
Press MUTE button on the RC or POWER/
MUTE button on the panel to turn off the
sound. “MUTE” appears on the display. Press
the button again or adjust volume to resume
the sound output.
Volume control
Press VOL+/VOL- buttons on the RC or
rotate VOLUME knob on the panel to decrease
or increase sound volume level.
Setting the sound characteristics
Press SEL button on the RC to select the
audio setting menu: BASS =>TREBLE =>
BALANCE => FADER => EQ. Press UP/
DOWN cursor buttons on the RC or rotate
Downloaded from Caradio-Manual.com Manuals
12 13
Operation Operation
levels. Default level is 25.
• Brightness: Adjust level of screen
brightness. Support 50 levels. Default level is 25.
• Contrast: Adjust level of screen contrast.
Support 50 levels. Default level is 25.
• Sharpness: Adjust level of screen
sharpness. Support 15 levels. Default level is 10.
• Screen: Adjust screen aspect: 16:9 => 4:3
=> FULL.
• Color reset: Resume color default status.
(Select YES or NO with cursor buttons, press
ENTER button on the RC or OK button on the
panel to confirm).
EXPERT MENU
• DX: Set search radio station by DX or
LOCAL mode. DX => LOCAL.
• Stereo: Set radio audio at STEREO or
MONO mode, STEREO => MONO.
• Beep: Set press button sound. 2ND =>
ALL => OFF.
• Loud: Set loudness on or off. OFF => ON.
• Subwoofer: Set subwoofer ON or OFF.
• Backlight: Set OSD backlight: HIGH =>
LOW => MID.
• OSD color: Set OSD color: DARK BLUE
=> VIOLET => LIGHT BLUE.
CLOCK MENU
• Clock: Set CLOCK display time or not.
OFF/ON.
• Clock Hour: set clock 12H/24H.
• Clock adjust: Set CLOCK ADJUST time.
Subwoofer
Connect a subwoofer to this unit using the
Subwoofer output of this unit. For subwoofer
operation an external amplifier is required.
AV in jack
AV jack is intended to receive audio and video
signals by connecting to external device.
Radio operations
Band selection
Press BND/RDM button on the RC or BAND
button on the panel to switch to the bands in
the following order: FM1 - FM2 - FM3 (OIRT) –
MW (AM).
Manual/automatic tuning
• Manual tuning: Press and hold SEEK- /
SEEK+
buttons on the RC to enter manual
tuning mode. MANUAL will be displayed.
Press these buttons repeatedly to change the
frequency upward or downward step by step.
• Automatic tuning: Press repeatedly SEEK-
/SEEK+ buttons on the RC or press
and hold these buttons on the panel to start
automatic seeking for an available radio station
downward or upward. After being found the
station will be played. To stop seeking, press
one of these buttons again.
Programming stations
• There are 6 numbered preset buttons on
the RC, with which you can store and recall
stations for each band (18 FM, 6 AM). Select
a station, then press and hold a preset button.
The station will be saved in the memory under
the corresponding number. To recall a stored
station, press the corresponding preset button.
• You also can save stations in the memory
with MEM/
button on the front panel. When
the needed frequency is found, press MEM/
,
then rotate VOLUME knob to select a memory
position (PRESET 1 - 6) and press OK button
to confirm saving.
Auto memory store/Preset scan
Auto store: Select a band, press and hold
AS/PS button on the panel or P.SCN/RPT
button on the RC to enter auto store mode.
The radio will automatically store 6 stations to
the 6 preset memories of the current band. To
stop auto store, press the button again.
During auto station preset, the unit will
search and store stations with the strong signal
first, and then weaker signal stations until the
memories are full.
Preset scan: Select a band, press AS/PS
button on the panel or P.SCN/RPT button
on the RC to scan all preset stations in the
Downloaded from Caradio-Manual.com Manuals
12 13
Operation Operation
memories of the current band. To stop preset
scan, press the button again.
Stereo/Mono reception
In FM mode, press STEREO/MONO button
on the RC to select stereo or mono signal
reception mode.
On-screen display
Press OSD button on the RC to show
enabled PTY function icon.
RDS background
RDS service availability varies with areas.
Please understand if RDS service is not
available in you area, the following service is
not available.
AF (Alternative frequencies) function
Press and hold AF/TA button on the RC
or MENU button on the panel to enable AF
function. When the radio signal strength is poor,
enabling the AF function will allow the unit to
automatically search another station with the
same PI (Program Identification) as the current
station but with stronger signal strength.
AF indicator on the display will flash until
RDS information is received. If RDS service is
not available in your area, turn off the AF mode.
TA (Traffic alarm) function
Press AF/TA button on the RC or press and
hold OK button on the panel to activate the
traffic alarm function.
When TA function is activated, it will search
the station with TA information automatically.
If there is no TA information, it will search the
station with TP information automatically, if
there is no TP information either, it will return to
the previous station after searching.
When receiving the station with TP
information but without TA information,
TP icon is on and TA icon keeps blinking;
when receiving the station with TP and TA
information, both TP and TA icons are on.
When playing in other mode and TA
information is received, it will change to the
radio mode automatically. After playing over, it
will return to the previous mode. Press AF/TA
button on the RC once to ignore the received TA
information, do it twice to turn off the function.
PTY (Program type) function
Press PTY/PROG button on the RC to open
PTY program type list, and repeat pressing
PTY/PROG button to select a PTY type. After
selecting the program type you want, press
number buttons 1 - 6 on the RC to start search.
Press it again to stop the PTY search. If PTY
code is different or not available, “PTY NONE”
blinks on the display.
Other functions
Press MENU button on the panel or RC to
enter Setting Menu. Press UP/DOWN cursor
buttons on the RC or rotate VOLUME knob on
the panel to select RDS SETUP page. Press
ENTER button or RIGHT cursor button on the
RC or press OK button on the panel to enter the
page. Press UP/DOWN cursor buttons on the RC
or rotate VOLUME knob on the panel to select
an item, and then press SEL button on the RC or
OK button on the panel to adjust the setting.
Press ENTER button on the RC or OK
button on the panel to confirm, press MENU
button to return to last settings list.
RDS SETUP
• TA ALARM/SEEK: In TA SEEK mode, the
unit will seek for traffic announcement program;
in TA ALARM mode, the alarm is set off.
• PI SOUND/MUTE: Choose either PI sound
or PI mute. PI sound refers to the reception
noise when the AF function tries to scan
alternative frequency.
• RETUNE S/L: RETUNE refers to the time
period the unit allows for radio scan when
reception is interrupted. SHORT represents
a time period of 30 seconds and LONG
represents a time period of 90 seconds.
• MASK DPI/ALL: During MASK DPI mode,
the unit will mask only the AF which has
different PI, this is the default mode; during
MASK ALL mode, the unit will mask the AF
Downloaded from Caradio-Manual.com Manuals
14
Operation
which has different PI and no RDS signal with
high field strength.
• EON TA DX/LOCAL: EON (Enhanced
Other Networks) - This unit is equipped with
the latest technology of EON control, so that
when you are listening to Radio or CD, if there
is any travel announcement from a nearby
local station, the radio will already know the
frequency of that radio station. Then it will
receive the station, turn up the volume, or
interrupt the playback for the duration of the
announcement. At the end of the announcement
the radio will return to its previous state ready
for the next announcement.
• REG ON/OFF: When REG is available (On),
the receiver accepts regional variants of the
tuned station display. When REG is unavailable
(Off), the receiver ignores regional variants.
• TA VOL: You can set the default volume of
TA announcement. Support 50 levels. Default
level is 15.
Disc/USB/SD/MMC operations
USB/SD/MMC notes
USB format supports 2.0. Capacity: up to 8
Gb.
For correct and satisfactory operation,
licensed SD/MMC memory cards of famous
brands should be used with this unit. Avoid
using memory cards of unknown brands.
Capacity: up to 8 Gb.
Insert/Eject disc
• Open the front panel and insert a disc into
the disc slot with label side up. The disc will be
automatically loaded into the unit. The first file
in the root folder will be played. Close the front
panel.
• Open the front panel and press EJECT
button to eject the disc from the slot. If the disc
is not removed from the slot within several
seconds, it will be automatically loaded into
the slot again. When the disc is ejected and
removed, the unit will automatically switch to
another mode.
Inserting an SD/MMC card/USB device
Open the front panel and insert an SD/
MMC memory card into the card slot. Open the
USB slot cover on the front panel and insert
a USB into the USB slot. Then the playing
mode will be changed into Card or USB mode
automatically. The first card/USB device track
playback will start.
When SD/MMC card and USB device are
both inserted, the playing mode will be changed
into the mode of the device inserted later.
Play/pause
The unit will automatically play from the first
sound track recorded on a disc/SD/MMC/USB
device. To ensure good system performance,
wait until the unit finishes reading the disc/
device information before proceeding. Press
button on the RC or MEM/ button on
the panel to pause playback, press it again to
resume playback.
MP3/DivX/JPEG file playback
When you insert a storage containing MP3/
DivX/JPEG file, the screen will show following
interface:
1 2 3 4 5
6 7 8
1. Storage folder list
2. Scroll bar
3. Current playback info
4. Current folder content (current file is
Downloaded from Caradio-Manual.com Manuals
15
Operation
highlighted)
5. Scroll bar
6. Audio track selection
7. Image file selection
8. Video file selection
Use cursor buttons to navigate in the
interface and press ENTER button to confirm
your selection.
Some AVI files cannot be played due
to their parameters and recording conditions.
Video files more than 2 Gb having AVI
extension can be played partially.
Stop playback
During playback of a disc/USB/SD/MMC
card, press /PBC button on the RC or press
and hold MEM/ on the panel to stop the
playback. Press
button on the RC or on
the unit to start playback again. Playback will
resume from the point it was stopped at. If you
press /PBC button on the RC or press and
hold MEM/ on the panel twice, playback will
stop completely and can be resumed only from
the beginning of the disc.
Selecting tracks
During playback press SEEK- button
to play the beginning of current track, press it
again to play the previous track. Press SEEK+
button to play the next track. Press number
buttons (0-9) on the RC to select the desired
track/chapter.
Fast forward/rewind
Press and hold SEEK- or SEEK+
buttons repeatedly for fast backward or forward
playing correspondingly. With each pressing
and holding playback speed will increase.
While fast playback, press
button on the
RC or MEM/ button on the panel to resume
normal speed.
When fast backward/forward playback
reaches the previous or next track, the unit will
resume normal playback.
A-B segment repeat
Press A-B/ZOOM button to set point A,
press one more time to set point B and start
A-B repeating. Press this button one more time
to cancel the repeating function.
Repeat playback
Press P.SCAN/RPT button repeatedly for
repeat playing in different modes: track/chapter
repeat, folder repeat, disc repeat, repeat cancel
(depending on the format used).
Intro playback
Press INT button on the RC to activate
introduction function. Several initial seconds
of each track will be played. Press the button
again to cancel intro playback.
GOTO
Press and hold AUDIO/GOTO button to
show the playback parameters for the current
chapter/track/time (track/title/chapter number or
time). Press cursor buttons to navigate between
the parameters and use number buttons to
input needed settings. Press OK button on
the panel or ENTER button on the RC to start
playback from the set number or time.
Random playback
Press BND/RDM button on the RC to
activate random playing mode. Press one more
time to return to normal playing.
Programming the playback
• Press PTY/PROG button to open program
menu.
• Use cursor buttons to select the program
position and use number buttons to input the
desired track/title/chapter (depending on the
disc type).
• Press
button on the RC or MEM/
button on the panel to start program play, or
move the cursor to select PLAY and press
ENTER button on the RC or OK button on the
panel to play.
• Move the cursor to CLEAR, press ENTER
button on the RC or OK button on the panel to
Downloaded from Caradio-Manual.com Manuals
16
Operation
delete the programmed list. Press PTY/PROG
button to quit programming.
OSD (On Screen Display) function
Press and hold OSD button on the
RC repeatedly to show current playback
information, such as number of track/chapter/
title, current track/chapter/title time elapsed/
remaining, total track/chapter/title time
remaining (depending on the disc type).
Zooming in/out
During playback of video or images on disc/
USB/SD/MMC, press and hold repeatedly
A-B/ZOOM button on the RC, the picture will
be zoomed in the sequence: X2 =>X3 =>X4
=>X1/2 => X1/3 => X1/4 => Normal.
PBC (Playback Control) function (for
VCD only)
This function is only available for the VCD
with PBC function.
Press and hold
/PBC button on the RC to
set PBC on/off; when PBC is off, the screen will
show PBC menu if you switch PBC on. If the
menu consists of a list of titles, you can select a
desired one using number buttons on the RC.
Changing angle (for DVD only)
Press ANGLE button on the RC to playback
images at different camera angles. If a disc
doesn’t support multi-angle playback, this
function will not work.
Selecting audio language (for DVD only)
During DVD disc playback, press AUDIO/
GOTO button on the RC repeatedly to select
the audio language to listen. This function will
not work if a disc does not support multi-
language audio.
Selecting subtitle language (for DVD
only)
If your DVD disc supports multi-language
subtitle, press SUB-T button on the RC
repeatedly to switch among disc-supported
languages.
Selecting sound channel (for VCD only)
During VCD disc playback press AUDIO/
GOTO button on the RC to select the channel:
Mono L => Mono R => MIX Mono => Stereo.
Menu navigation (for DVD only)
Press and hold MENU button on the RC
to activate the disc menu list on the screen.
Choose the desired item. Press ENTER button
or button on the RC or OK button on the
panel to confirm the selected item and start
playing.
Title and menu are only available if the
disc has these functions.
ID3 Tag function
If a MP3 file has ID3 tag information in the
supported ID3 format, such information will be
displayed on the LCD while playback
System setup
Press SETUP button on the RC to display
setup screen, use LEFT/RIGHT cursor buttons
and ENTER button to select the desired setup
page: System, Language, Audio, Video, Digital.
In the selected page select an option using
UP/DOWN cursor buttons, then press RIGHT
cursor button to go to setting list. Use UP/
DOWN cursor buttons to select the needed
setting. Press ENTER button on the RC or OK
button on the panel to confirm.
Downloaded from Caradio-Manual.com Manuals
17
Operation
System setup
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
TV system
Select the TV system in the setting menu
(NTSC, PAL, PAL-60, AUTO).
Screen saver
The screen saver appears if disc stops for
more than 3 minutes. Original setting: On.
Video
Interlace-S-Video
TV type
Select TV type to watch wide screen movies.
4:3 PS: For 4:3 TV, left and right edges will
be cut.
4:3 LB: For 4:3 TV, black bars will appear on
top and bottom.
16:9: For 16:9 wide screen TV.
Password
Original password is 0000.
Rating
The rating of the disc is from 1 to 8:
1 (KID SAFE) with the most limits when
playing.
8 (ADULT) with the least limits when playing.
Original setting: 8.
The rating can be selected only under the
password unlocked status, and the limits can be
worked only under the password locked status.
Default
If this item is selected, the unit will return to
original setting.
Language setup
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
DIVX [R] VOD
OSD language
Select the language to be used for the on-
screen display.
Audio language
Select the language to be used for the audio.
You can select a preferred audio from those
included on the DVD video disk.
Subtitle language
Select the language to be used for the
Subtitles. You can select a preferred subtitle
from those included in the DVD Video disk.
Menu language
Select the language to be used for the Menu.
You can select a preferred audio from those
included on the DVD.
Audio setup
AUDIO SETUP
KEY
Key
Select key up/down according to your
preference.
Downloaded from Caradio-Manual.com Manuals
18
Operation
Video setup
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
Set a parameter with UP/DOWN cursor
buttons: Brightness, Contrast, Hue, Saturation,
Sharpness.
Digital setup
DIGITAL SETUP
DYNAMIC RANGE
DUAL MONO
Dynamic range
When you select the compressed mode as
“line out”, select it to adjust the compression
proportion and get the different compressed
effect. When select FULL, the audio signal is
minimum; when select OFF, the audio signal is
maximum.
Dual mono
Select the audio channel from STEREO,
MONO L, MONO R and MIX MONO.
Downloaded from Caradio-Manual.com Manuals
Cleaning the unit body
Wipe with a soft cloth. If the cabinet is very
dampen (not dropping wet) the cloth with a
weak solution of soapy water, and then wipe
clean.
Accessories
1. Receiver
2. Front panel
3. Protective case
4. Remote controller
5. ISO connector set (A+B)
6. Mounting parts:
Nut
Spring washer
Flat washer
Bolt
Screw
Metal strap
Release key
Trim frame
Rubber cushion
7. Instruction manual
8. Warranty card
9. Consumer information
19
General information
Handling compact discs
• Do not insert anything other than a CD into
the CD loading slot.
• Do not use cracked, chipped, warped, or
otherwise damaged discs as they may cause
skipping or noise damage the player.
• Handle the disc only by the edges (as
shown in the picture). To keep discs clean do
not touch its surface.
• Store discs in their cases when not in use.
• Do not expose discs to direct sunlight,
high humidity, high temperature or dust.
• Prolonged exposure to extreme
temperature (such as leaving the discs in your
car during summertime) can wrap a disc.
• Do not attach labels, write on or apply
chemicals to the surface of the discs.
• Do not touch the recorded surface of the
discs.
• Use 12-cm CDs. Use only conventional,
fully circular discs. Do not use shaped discs.
Cleaning discs
Fingerprints should be carefully wiped from
the surface of disc with a soft cloth. Unlike
conventional records, compact discs have no
grooves to collect dust and macroscopic dirt,
so gently wiping them with a soft cloth should
remove must panicles. Wipe in a straight
motion from the center to the edge.
Never use thinner benzine, record cleaner
or anti static spray on a compact disc. Such
chemicals can damage its plastic surface.
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
4 pcs
1 pc
2 pcs
1 pc
1 pc
1 pc
1 pc
1 pc
Downloaded from Caradio-Manual.com Manuals
20 21
General information General information
Troubleshooting
Below is a table describing simple measures that can help you eliminate most problems likely
to emerge when this unit is in use. If below measures do not help, turn to a service center or to the
nearest dealer.
Symptom Cause Solution
No power The car ignition is not on. If the power supply is properly connected
to the car accessory switch the ignition
key to “ACC”.
The fuse is blown. Replace the fuse.
No sound Volume is in minimum. Adjust volume to a desired level.
Wiring is not properly
connected.
Check wiring connection.
Bad sound quality The installation angle is more
than 30 degrees.
Adjust the installation angle to less than
30 degrees.
The disc is extremely dirty or
defective.
Clean the compact disc/try to play a new
one.
Disc cannot be
loaded or ejected
The unit already contains a
disc.
Remove the disc in the player then put a
new one.
Moisture condensation. Leave the unit idle for an hour, then retry.
Disc cannot be
read
The disc is inserted upside
down.
Insert the compact disc with the label
side facing upward.
Compact disc is extremely
dirty or defective.
Clean the disc or try to play a new one.
Temperature inside the car is
too high.
Cool off until the ambient temperature
returns to normal.
Buttons do not
work
The built-in microcomputer is
not operating properly.
Reset the unit with the help of RESET
button.
Front panel is not properly fix
into its place.
Install the front panel properly.
The radio does
not work
The antenna cable is not
connected.
Insert the antenna cable properly.
The radio station
automatic tuning
does not work
The signals are too weak. Select stations manually.
Downloaded from Caradio-Manual.com Manuals
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
/