14
OUTDOOR FAN
USER GUIDE
SAFETY INFORMATION
For your safety and correct use of the fan, please read this manual carefully before using
it, and also save it for re-reading after transporting or selling the device. Improper handling of
the device can lead to its breakdown, cause material damage or cause harm to the health of
the user.
ATTENTION! The manufacturer is not responsible for any damage caused by improper
use of the device or non-compliance with precautions and safety measures.
• When removing the device from the package, make sure that it is intact and there is no
damage. Keep the packaging materials away from children. Dispose of the packaging
correctly.
• This device is not intended for use by persons with physical or mental disabilities (including
children under 8 years of age), as well as persons who do not have sufficient knowledge
and experience in using it, unless they are under the supervision of a person responsible
for their safety. Children should not play with the elements of the device. Maintenance and
cleaning of the device can not be carried out by children without adult supervision.
• The use of a fan by children is possible only under the supervision of adults.
• Before the first (and each subsequent) switch-on, check the device for damage and whether
the technical characteristics indicated on the product correspond to the parameters of the
power supply.
• Inspect the appliance every time before turning it on, check the condition of the power cord.
If you find any defects (cracks, traces of melting, hardening of the material), do not plug the
device into the outlet, contact the service center for examination and repair, do not try to repair
the fan yourself!
• If there is any damage to the device or the power cord, do not connect it to the mains in any
case. Report the damage to the store where the product was purchased, contact the service
center for examination and repair. Do not try to repair it yourself. In this case, do not throw
away the packaging.
• It is not safe to disassemble, repair the fan or make any changes to its design. Any damage
to the electrical wiring of the device can cause an electric shock, fire or short circuit. In case
of malfunctions, you should immediately contact an authorized service center, indicating the
type of problem and the model of your fan. Only original spare parts can be used for repairs.
Unskilled repairs remove the device from warranty service.
• If you plan to go somewhere for a long period of time, disconnect the fan from the power
supply.
RISK OF ELECTRIC SHOCK
• The fan must be connected to the 220-240 V / 50 Hz with a current of at least 10A.
• Insert the plug of the power cord into the socket only after installing the device. Make sure
that there is free access to the power plug. At the same time, do not touch the plug of the
power supply cable with wet hands. Wipe the plug dry, clean it from dust and carefully insert
it into the outlet. Dust, water, or weak contact can cause a fire or electric shock.
• When moving, servicing or repairing, the fan must be disconnected from the mains. To
disconnect, hold on to the plug, do not pull or pull the power cord.
• Do not use the appliance with a damaged power cord or socket. Do not twist, bend or
increase the power cord. Do not place heavy objects on it. Make sure that the cord does not
touch sharp edges and heated surfaces.
• Do not use the fan outside, do not expose it to rain, moisture, direct sunlight and other
atmospheric phenomena.
• Do not immerse the device in water, prevent water and any liquids from getting on any part