dji GO 4 Руководство пользователя

DISCLAIMER AND SAFETY GUIDELINES

免责声明和安全操作指引

免責聲明與安全指導方針

免責事項および安全ガイドライン

고지 사항 및 안전 가이드

HAFTUNGSAUSSCHLUSS UND SICHERHEITSVORSCHRIFTEN

RENUNCIA DE RESPONSABILIDAD Y DIRECTRICES DE SEGURIDAD

CLAUSE D‘EXCLUSION DE RESPONSABILITÉ ET CONSIGNES DE SÉCURITÉ

LIMITAZIONI DI RESPONSABILITÀ E DIRETTIVE SULLA SICUREZZA

DISCLAIMER EN VEILIGHEIDSRICHTLIJNEN

ISENÇÃO DE RESPONSABILIDADE E DIRETRIZES DE SEGURANÇA

ЗАЯВЛЕНИЕ ОБ ОТКАЗЕ ОТ ОТВЕТСТВЕННОСТИ И РУКОВОДСТВА ПО ТЕХНИКЕ

БЕЗОПАСНОСТИ

INSPIRE 2

2017.05V1.2

©

1

DISCLAIMER AND SAFETY GUIDELINES 2

免责声明和安全操作指引 10

免責聲明與安全指導方針 17

免責事項および安全ガイドライン 24

고지 사항 및 안전 가이드 32

HAFTUNGSAUSSCHLUSS UND SICHERHEITSVORSCHRIFTEN 39

RENUNCIA DE RESPONSABILIDAD Y DIRECTRICES DE SEGURIDAD 47

CLAUSE D‘EXCLUSION DE RESPONSABILITÉ ET CONSIGNES DE SÉCURITÉ 55

LIMITAZIONI DI RESPONSABILITÀ E DIRETTIVE SULLA SICUREZZA 63

DISCLAIMER EN VEILIGHEIDSRICHTLIJNEN 71

ISENÇÃO DE RESPONSABILIDADE E DIRETRIZES DE SEGURANÇA 79

ЗАЯВЛЕНИЕ ОБ ОТКАЗЕ ОТ ОТВЕТСТВЕННОСТИ И РУКОВОДСТВА ПО

ТЕХНИКЕ БЕЗОПАСНОСТИ 87

EN

JP

ES

NL

CHS

KR

FR

PT

CHT

DE

IT

RU

COMPLIANCE INFORMATION 95

Contents

2

©

EN

Safety at a Glance

1. Environmental Considerations

• Always y at locations that are clear of building and other obstacles.

• DO NOT y above or near large crowds.

• Avoid ying at altitudes above 400 feet (120 m).

• Fly in moderate weather conditions with temperatures between -4° to 104° F (-20° to 40° C).

• Please take additional caution while ying indoors because the aircraft stabilization features may

be interfered.

2. Pre-ight Checklist

• Ensure the remote controller and aircraft batteries are fully charged.

• Ensure the propellers are in good condition and securely tightened before each ight.

• Ensure there is nothing obstructing the motors.

• Check that the camera lens is clean and free of stains.

• Only calibrate the compass when the DJI GO 4 app or the status indicator prompt you to do so.

• Altering or modifying the aircraft may impact its stability.

3. Operation

• Stay away from the rotating propellers and motors.

• Maintain visual line of sight of your aircraft at all times.

• DO NOT pull the left stick to the bottom inside corner and press the Return-to-Home (RTH) button at the same time when the aircraft is

airborne unless in an emergency situation.

• DO NOT answer incoming calls or use texting features of your mobile devices during ight.

• DO NOT y under the inuence of alcohols or drugs.

• During the Return-to-Home procedure, you can adjust the altitude to avoid obstacles.

• DO NOT y closely above reective surfaces such as water or snow, as these terrain may affect the performance of the Vision System.

• In the instance of a Low Battery Warning, land the aircraft immediately at a safe location. ONLY power off the aircraft and the remote

controller after the motors stop rotating.

• After landing, rst stop the motor, then turn off the Intelligent Flight Battery, and then turn off the remote controller.

• When using TapFly and ActiveTrack features, be prepared to take control of the aircraft or press the stop button on the screen at all times,

in case of an emergency.

• While with advanced technology, the pilot’s sound discretion is required during the ight. Safety and ight assistance features such as

obstacle avoidance, aircraft stabilization, and Return-to-Home are designed to assist your operation, not to replace it.

• Environmental conditions including lighting and obstacle’s texture may impact the performance of the Vision System.

• The aircraft is not able to automatically brake and stop at a safe distance from an obstacle if the aircraft speed exceeds 14m/s (31.3 mph).

• The vision system and the Infrared Sensing System are disabled in certain situations. Please refer to the User Manual for more information.

• Please set the Return to Home ight height higher than surrounding obstacles.

• The RTH feature does not enable the aircraft to automatically return to a moving home point.

• Landing protection (detects if the ground is suitable for landing at an altitude of 2 meters above the ground) and the auto lowering function

of the landing gear are used to optimize the operation experience. Always be alert when in control of the aircraft as the vision system may

be disabled in certain situations (e.g. bad lighting or unclear obstacle surface patterns), and ground surface detection may fail.

4. Maintenance and Upkeep

• DO NOT use aged, chipped or broken propellers.

• Recommended storage temperature: between 71° and 82° F (22° and 28° C).

• Refer to the

Intelligent Flight Battery Safety Guidelines

for more information about safe use of the battery.

5. Observe Local Laws and Regulations

• DO NOT y in the No Fly Zones. You can nd a complete list of these areas at http://ysafe.dji.com/

• The DJI

TM

No Fly Zone is not a replacement for local government regulations or good judgment.

• Avoid ying in areas where rescue teams are actively using the airspace.

The DJI INSPIRE

TM

2 aircraft is

NOT a toy and is not suitable

for children under the age of 18.

Note that ‘Safety at a Glance’ only

provides a quick overview of the safety

tips. Make sure you read and understand

the remaining sections of this document.

Fly in Open Areas Strong GPS Signal Maintain Line of Sight Fly Below

400 feet (120 m)

©

3

EN

Avoid ying over or near obstacles, crowds, high voltage power lines, trees or bodies of water.

DO NOT y near strong electromagnetic sources such as power lines and base stations as it may affect the onboard compass.

DO NOT use the aircraft in adverse weather conditions such as rain, snow, fog and wind speeds

exceeding 10 m/s or 22 mph.

Stay away from the rotating propellers and motors.

No Fly Zone

Learn more at:

http://ysafe.dji.com/no-y

≥

10m/s

NOTICE

All instructions and other collateral documents are subject to change

at the sole discretion of SZ DJI TECHNOLOGY CO., LTD. For up-to-

date product information, visit http://www.dji.com and click on the

Inspire 2 product page.

Glossary

The following terms are used throughout the product literature to

indicate various levels of potential harm when operating this product:

NOTICE: Procedures, which if not properly followed, create

a possibility of physical property damage AND a little or no possibility

of injury.

CAUTION: Procedures, which if not properly followed,

create the probability of physical property damage AND a possibility

of serious injury.

WARNING: Procedures, which if not properly followed,

create the probability of property damage, collateral damage, and

serious injury OR create a high probability of supercial injury.

Read the ENTIRE user manual

to become familiar with the

features of this product before operating. Failure to operate

the product correctly can result in damage to the product or

personal property and cause serious injury.

This is a sophisticated product. It must be operated with

caution and common sense and requires some basic

mechanical ability. Failure to operate this product in a safe

and responsible manner could result in injury or damage to

the product or other property. This product is not intended for

use by children without direct adult supervision. DO NOT use

with incompatible components or alter this product in any way

outside of the documents provided by SZ DJI TECHNOLOGY

CO., LTD. These Safety Guidelines contain instructions for

safety, operation and maintenance. It is essential to read and

follow all of the instructions and warnings in the user manual,

prior to assembly, setup or use, in order to operate the

product correctly and avoid damage or serious injury.

AGE RECOMMENDATION: NOT FOR CHILDREN UNDER THE

AGE OF 18. THIS IS NOT A TOY.

4

©

EN

Pre-ight Checklist

1. Ensure that you are using only genuine parts and that all parts are

in mint condition.

2. Ensure the remote controller, Intelligent Flight Battery, and mobile

device are fully charged.

3. Ensure that there is no foreign object stuck to the camera lens, the

Micro SD card has been inserted into the camera, and the gimbal

can rotate freely before powering it on.

4. Ensure the propellers and mounting plates are securely mounted

onto the motors, and the motors can start and function normally.

5. Follow the on-screen instructions to calibrate the compass.

6. Ensure the DJI GO 4 app and aircraft's firmware have been

upgraded to the latest version.

7. Ensure that your ight area is outside the NO Fly Zones and ight

conditions are suitable for ying the aircraft.

8. Be sure that you are NOT ying under the inuence of alcohol,

drugs or any substance that may impair your cognitive abilities.

9. Be familiar with the selected ight mode and understand all safety

functions and warnings.

10. Be sure to observe all local regulations, obtain appropriate

authorizations, and understand the risks. REMEMBER: It is solely

your responsibility to comply with all ight regulations.

11. Please MAINTAIN LINE OF SIGHT (WITH YOUR EYES) OF

YOUR AIRCRAFT AT ALL TIMES . Please DO NOT only rely on

rst person view camera to control your aircraft.

12. Ensure the DJI GO 4 app is properly launched to assist your

operation of the aircraft. Without the ight data recorded by the

DJI GO 4 app, in certain situations (including the loss of your

aircraft) DJI may not be able to provide aftersales support to you

or assume liability.

Disclaimer and Warning

This product is NOT a toy and is not suitable for children under the

age of 18. Adults should keep the aircraft out of the reach of children

and exercise caution when operating this aircraft in the presence of

children.

This product is a ying camera that offers easy ight when in good

working order as set forth below. Visit http://www.dji.com for the most

current instructions and warnings and http://knowbeforeyouy.org/

for more information about ight safety and compliance.

The information in this document affects your safety and your legal

rights and responsibilities. Read this entire document carefully to

ensure proper conguration before use. Failure to read and follow

the instructions and warnings in this document may result in product

loss, serious injury to you, or damage to your aircraft.

By using this product, you hereby signify that you have read this

disclaimer carefully and that you understand and agree to abide by

the terms and conditions herein. EXCEPT AS EXPRESSLY PROVIDED

IN DJI LIMITED WARRANTY (POLICY AVAILABLE AT (HTTP://

WWW.DJI.COM/SERVICE), THE PRODUCT AND ALL MATERIALS,

AND CONTENT AVAILABLE THROUGH THE PRODUCT ARE

PROVIDED “AS IS” AND ON AN “AS AVAILABLE” BASIS, WITHOUT

WARRANTY OR CONDITION OF ANY KIND, EITHER EXPRESS

OR IMPLIED. DJI DISCLAIMS ALL WARRANTIES OF ANY KIND,

EXCEPT AS EXPRESSLY PROVIDED IN DJI LIMITED WARRANTY,

WHETHER EXPRESS OR IMPLIED, RELATING TO THE PRODUCT,

PRODUCT ACCESSORIES, AND ALL MATERIALS, INCLUDING:

(A) ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE, TITLE, QUIET ENJOYMENT, OR

NON-INFRINGEMENT; AND (B) ANY WARRANTY ARISING OUT

OF COURSE OF DEALING, USAGE, OR TRADE. DJI DOES NOT

WARRANT, EXCEPT AS EXPRESSLY PROVIDED IN DJI LIMITED

WARRANTY, THAT THE PRODUCT, PRODUCT ACCESSORIES, OR

ANY PORTION OF THE PRODUCT, OR ANY MATERIALS, WILL BE

UNINTERRUPTED, SECURE, OR FREE OF ERRORS, VIRUSES, OR

OTHER HARMFUL COMPONENTS, AND DO NOT WARRANT THAT

ANY OF THOSE ISSUES WILL BE CORRECTED.

NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN,

OBTAINED BY YOU FROM THE PRODUCT, PRODUCT

ACCESSORIES, OR ANY MATERIALS WILL CREATE ANY

WARRANTY REGARDING DJI OR THE PRODUCT THAT IS NOT

EXPRESSLY STATED IN THESE TERMS. YOU ASSUME ALL RISK

FOR ANY DAMAGE THAT MAY RESULT FROM YOUR USE OF OR

ACCESS TO THE PRODUCT, PRODUCT ACCESSORIES, AND ANY

MATERIALS. YOU UNDERSTAND AND AGREE THAT YOU USE THE

PRODUCT AT YOUR OWN DISCRETION AND RISK, AND THAT YOU

ARE SOLELY RESPONSIBLE FOR ANY PERSONAL INJURY, DEATH,

DAMAGE TO YOUR PROPERTY (INCLUDING YOUR COMPUTER

SYSTEM OR MOBILE DEVICE OR DJI HARDWARE USED IN

CONNECTION WITH THE PRODUCT) OR THIRD PARTY PROPERTY,

OR THE LOSS OF DATA THAT RESULTS FROM YOUR USE OF OR

INABILITY TO USE THE PRODUCT.

SOME JURISDICTIONS MAY PROHIBIT A DISCLAIMER OF

WARRANTIES AND YOU MAY HAVE OTHER RIGHTS THAT VARY

FROM JURISDICTION TO JURISDICTION.

DJI

accepts no liability for damage, injury or any legal responsibility

incurred directly or indirectly from the use of this product. The user

shall observe safe and lawful practices including, but not limited to,

those set forth in these Safety Guidelines.

Data Storage and Usage

When you use our mobile app or our products or other software,

data regarding the use and operation of the product, such as ight

telemetry data (e.g., speed, altitude, battery life, and information about

the gimbal and camera) and operations records, may be automatically

or manually uploaded to and maintained on a DJI-designated server.

The internal storage device incorporated into the product stores

various types of data, including ight telemetry data. You may also

provide ight telemetry data and other data to us when you manually

transmit that information from the internal storage device to us.

The information that is automatically uploaded or manually uploaded

to us does not include personal data (i.e., your name, address, email,

or other information that specifically identifies you), but personal

data, such as your user name, may become associated with, used

to identify, or tagged to such uploaded information when we store

it. We separately describe how we use your user name and other

personal data on our privacy policy at http://www.dji.com/policy. By

using the product, the mobile app or other software we distribute, or

by manually providing data to us, you consent to the following:

• Our storage of any ight telemetry data and other data uploaded

or provided to us, including in combination with your user name;

• Our use of any such data uploaded or provided (including your

user name) in connection providing support and services to you

and to improve our products;

• Our disclosure of such data uploaded or provided (including your

user name) to our agents and/or contractors who may use it on our

behalf or in connection with their relationship with us; and

• Our disclosure of such uploaded or provided data (including your

user name) as required by law, in a matter of public safety or

policy, as needed in connection with the transfer of our business

assets, or if we believe in good faith that sharing the data is

necessary to protect our rights or property.

Before You Begin

The following documents have been produced to help you safely

operate and make full use of your aircraft:

In the Box

Disclaimer and Safety Guidelines

Intelligent Flight Battery Safety Guidelines

Quick Start Guide

User Manual

©

5

EN

Check all of the included parts listed in the In the Box document and

read the Disclaimer and Safety Guidelines before ight. Then prepare

for your rst ight by using the Quick Start Guide and watching all

of the tutorial videos on DJI’s ofcial website (http://www.dji.com). If

you have questions, refer to the User Manual in the DJI GO 4 app or

on DJI’s ofcial website for more comprehensive information. Make

sure you fully understand the functionality of each individual part, the

ight condition requirements, the key contingency warning functions/

systems, and all government regulations before each ight. If you

have any questions or problems during the assembly, maintenance

or use of this product, please contact DJI or a DJI authorized dealer.

Individual Parts

Regarding Genuine and Functional Parts

To avoid component malfunction, serious injury, and property damage,

observe the following rules:

1. Use only genuine DJI parts or parts certified by DJI. Unauthorized

parts or parts from non-DJI certied manufacturers may cause system

malfunctions and compromise safety.

2. Ensure there are no foreign objects (such as water, oil, soil, sand, etc.)

inside of the aircraft or its components.

3. Ensure the aircraft and its components – including but not limited to the

remote controller, camera, gimbal, compass, propulsion system, and

battery – are all in good working order, damage-free, and functioning

well. Refer to the remaining sections in this document for more details

on how to ensure the functionality of these components.

4. DO NOT modify or alter the aircraft, its components, and parts.

Unauthorized modification may cause malfunctions and affect the

aircraft’s functionality and safety.

Remote Controller

1. Ensure the remote controller is fully charged before each ight.

2. If the remote controller is powered on and has NOT been used for

5 minutes, it will sound an alert. After 10 minutes it will automatically

power off. Move the sticks or perform some other action to cancel the

alert.

3. Adjust the clamp of the mobile device holder to allow a rm grip

on your mobile device.

4. Ensure the mobile device holder is rmly in place and does not slip.

5. Ensure the antennas of the remote controller are unfolded and

adjusted to the proper position to achieve optimal transmission quality.

6. Repair or replace the remote controller if damaged. A damaged

remote controller antenna will greatly decrease performance.

7. Linking is required if you wish to replace your remote controller or

receiver or add a new remote controller. Refer to the User Manual

for details.

8. A secondary remote controller cannot be linked with the aircraft and

cannot control the aircraft’s ight. You may congure it into a primary

remote controller via the DJI GO 4 app and then link it to the aircraft

to control ight.

9. Make Sure that you rst switch off the aircraft (after it is safe to do so),

then switch off the Remote Controller. Otherwise it may cause the lost

of control of the aircraft.

Compass

To avoid possible serious injury and property damage, observe the

following rule:

Land immediately when severe drifting occurs in ight, i.e., the aircraft

does NOT y in straight lines.

Only calibrate the compass when the DJI GO 4 app or the status

indicator prompt you to do so. Observe the following rules when

calibrating your compass:

1. DO NOT calibrate your compass where there is a chance of strong

magnetic interference, such as magnetite, parking structures, and

steel reinforcements underground.

2. DO NOT carry ferromagnetic materials with you during calibration

such as cellular phones.

3. The DJI GO 4 app will prompt you to resolve the compass issue

if the compass is affected by strong interference after calibration

is complete. Follow the prompted instructions to resolve the

compass issue.

Propulsion Systems

To avoid serious injury to yourself or others, which may be caused by the

rotating propellers and motors, observe the following rules:

Propellers

1. DO NOT use aged, chipped, or broken propellers.

2. Always power off the aircraft before touching the propellers.

3. Be aware of the sharp edges of the propellers when mounting or

removing the propellers. Wear gloves or take other protective measures

when touching the propellers.

4. Whenever necessary, use tools (e.g., wrench, screwdriver, pliers, etc.) to

remove or install the propellers.

5. Ensure the propellers are securely mounted to prevent them from falling

off the motors.

6. DO NOT turn on the motors when propellers are mounted and there are

other people or animals in the immediate vicinity.

7. Using third-party propellers may compromise the aerodynamics of the

aircraft. For a better and safer ight experience, we recommend you to

use original DJI propellers only.

Motors

1. Ensure the motors are securely mounted and rotating smoothly.

2. DO NOT attempt to modify the structure of the motors.

3. DO NOT touch or let your hands or body come in contact with the

motors after ight as they may be hot.

To avoid possible serious injury and property damage, observe the

following rules:

1. DO NOT block any of the ventilation holes on the motors.

2. DO NOT block any of the ventilation holes on the frame arm of the aircraft.

Motors

1. Keep the motors free of dust.

2. If a motor is stuck and unable to rotate freely, execute the CSC

(Combination Stick Command) to stop the motors immediately.

Electronic Speed Controllers

Ensure the ESCs sound a normal tune when powered on.

DJI GO

TM

4 App

1. Be sure to fully charge your tablet or mobile device before launching

the app. A tablet is recommended for a better user experience.

2. If you are using a phone as your mobile display device, be sure to

continue ying safely when the phone receives an incoming call.

DO NOT accept phone calls during ight.

3. Read all prompted safety tips, warning messages, and disclaimers

carefully. Be familiar with the related regulations in your area. You

are solely responsible for being aware of all relevant regulations

and ying in a way that is compliant.

DJI reserves the right to update this Disclaimer and Safety Guidelines. Please visit

http://www.dji.com and check your email periodically for the latest version. This

disclaimer is made in various language versions; in the event of divergence among

different versions, the English version shall prevail.

6

©

EN

a. Read and understand the warning messages before using the

Auto-take off and Auto-land feature.

b. Read and understand the warning messages before re-setting

your Home Point.

c. Read and understand the warning message and disclaimer

before setting the altitude beyond the regulatory limit.

d. Read and understand the warning messages and disclaimer

before switching between the ights modes.

4. Land your aircraft immediately at a safe location if there is an alert

shown on the app.

5. Examine and check all warning messages on the checklist displayed

in the app prior to each ight.

6. Use the in-app simulator to practice your ight skills if you have

never operated the aircraft or if you DO NOT have sufficient

experience to be comfortable operating the aircraft.

7. Cache the map data of the area where you intend to y the aircraft

by connecting to the Internet before each ight.

8. The app is designed to assist your operation. Please use your sound

discretion and DO NOT rely on the app to control your aircraft.

9. Your use of the app is subject to the DJI GO 4 app Terms of Use

and DJI Privacy Policy. Please read them carefully in the app.

Firmware

To avoid serious injury to children and animals, observe the following

rule:

Keep children and animals at a safe distance during any firmware

upgrade, system calibration, and parameter setting procedures.

1. For safety, always update the rmware to the latest version when

an upgrade notication is shown in the DJI GO 4 app.

2. Firmware upgrade notifications will inform about new firmware

upgrades. You are required to read and understand the

information shown. You further understand and agree that the

data including but not limited to flight telemetry data and user

selection records may be uploaded to and maintained on a DJI-

designated server.

3. Be sure to update the remote controller’s rmware to the latest

version after you update the aircraft’s rmware.

4. The remote controller may become unlinked from the aircraft after

updating. Re-link the remote controller and aircraft.

5. Be sure to check all connections and remove the propellers from

the motors before performing the rmware update.

Camera (Optional)

To avoid possible serious injury and property damage, observe the

following rule:

DO NOT block any ventilation holes on the camera as the heat generated

may hurt you and damage the device.

1. Check camera settings before use to make sure you can adjust

them to t your needs.

2. Test the camera by shooting a few test images and check that it is

operating correctly before shooting important pictures or videos.

3. DO NOT remove the Micro SD card from the camera when it is

powered on.

4. Photos or videos cannot be transmitted or copied from the camera

if the Intelligent Flight Battery is powered off.

5. Be sure to power off the Intelligent Flight Battery correctly, otherwise

your camera parameters will NOT be saved and any recorded videos

may be damaged. NOTE: Regardless of the reason, DJI will not be

responsible for any failure of an image or video to be recorded or

having been recorded in a way that is not machine readable.

Gimbal (Optional)

1. Precision elements in the gimbal may be damaged in a collision

or impact, which may cause the gimbal to function abnormally.

2. DO NOT apply external force to the gimbal after the gimbal is

powered on.

3. DO NOT add any payloads to the gimbal, as this may cause the

gimbal to function abnormally or even lead to motor damage.

4. The gimbal and gimbal connector are very delicate. Handle with

care and DO NOT touch the gimbal connector, as any damage

will cause it to function abnormally.

5. Hold the gimbal rmly when detaching or reattaching it, so it does

not drop.

Product Care

Storage and Transportation

To avoid serious injury to children and animals, observe the following

rule:

Small parts, such as cables and straps, are dangerous if swallowed.

Keep all parts out of reach of children and animals.

1. Store the Intelligent Flight Battery and remote controller in a cool,

dry place away from direct sunlight to ensure the built-in LiPo

battery does NOT overheat. Recommended storage temperature:

between 71° and 82° F (22° and 28° C) for storage periods of

more than three months. Never store in environments outside the

temperature range of -4° to 113° F (-20° to 45° C).

2. DO NOT allow the camera to come into contact with, or become

immersed in, water or other liquids. If it gets wet, wipe dry with

a soft, absorbent cloth. Turning on an aircraft that has fallen

into water may cause permanent component damage. DO NOT

use substances containing alcohol, benzene, thinners or other

ammable substances to clean or maintain the camera. DO NOT

store the camera in humid or dusty areas.

3. Detach the gimbal from the aircraft when storing for a long period

of time or transporting over long distances.

4. DO NOT connect this product to any USB interface that is older

than version 2.0. DO NOT connect this product to any "power

USB" or similar devices.

Maintenance and Upkeep

1. Check every part of the aircraft after any crash or violent impact. If you

have any problems or questions, please contact a DJI authorized dealer.

2. The battery can be stored for three months if its remaining battery

level stays between 40% to 65%. Fully charge and discharge

the battery at least once every three months to maintain battery

health.

3. It’s recommended service it after every 50 hours of ight time, in

order to keep the aircraft working properly.

Flight Condition Requirements

Weather Conditions and Surrounding Environment

The aircraft is designed to operate in good to moderate weather

conditions. To avoid collision, serious injury and property damage,

observe the following rules:

1. DO NOT use the aircraft in severe weather conditions. These

include wind speeds exceeding 10 m/s, snow, rain, smog, heavy

wind, hail, lightning, tornadoes or hurricanes.

2. Keep the aircraft at least 30 feet (10 meters) away from obstacles,

people, animals, buildings, public infrastructure, trees, and bodies

©

7

EN

of water when in flight. Stay even further away from the above

objects as your altitude increases.

3. Be EXTRA cautious when operating the aircraft indoors. Some

features of the aircraft, especially the stabilization feature, may be

impacted.

4. Be sure to enable the Vision System when ying indoors. Note that

the Vision System may NOT work properly when it is ying over

water, over surfaces without a clear pattern, or in a low dimmed

environment.

1. Aircraft and battery performance is subject to environmental

factors such as air density and temperature.

a. It is not recommend to operate the aircraft in environments

outside the temperature range of -4° to 104° F (-20° to 40° C).

2. DO NOT use the aircraft near accidents, fire, explosions, floods,

tsunamis, avalanches, landslides, earthquakes, dust, or sandstorms.

Interference with Flight Controller, Communications,

and Vision Systems

1. Fly in open areas. Tall buildings or steel structures may affect the

accuracy of the on-board compass and block the GPS signal.

2. Avoid interference between the remote controller and other

wireless equipment. Make sure to turn off the Wi-Fi on your mobile

device.

3. DO NOT fly near areas with magnetic or radio interference.

These include but are NOT limited to: high voltage lines, large

scale power transmission stations or mobile base stations and

broadcasting towers. Failing to do so may compromise the

transmission quality of this product or cause remote controller and

video transmission errors which may affect ight orientation and

location accuracy. The aircraft may behave abnormally or go out

of control in areas with too much interference.

Operating the Aircraft Responsibly

To avoid serious injury and property damage, observe the following

rules:

1. Make sure you are NOT drunk, taking drugs, under the inuence

of anesthesia, or suffering from dizziness, fatigue, nausea or any

other conditions, whether physical or mental, that could impair your

ability to operate the aircraft safely.

2. Pulling the left stick to the bottom inside corner and pressing

the RTH button at the same time will stop the motor when the

aircraft is airborne. The landing function of the aircraft will not

be triggered. DO NOT perform the aforementioned combination

command unless in an emergency situation. You may turn off this

combination command feature via the DJI GO 4 app.

3. Upon landing, power off the aircraft rst, then switch off the remote

controller.

4. DO NOT drop, launch, fire or otherwise project any dangerous

payloads on or at any buildings, persons or animals, or which could

cause personal injury or property damage.

1. Make sure you have been sufciently trained and are fully aware

of any contingency plans before accidents happen.

2. Make sure you have a flight plan and never fly the aircraft

recklessly.

3. Respect the privacy of others when using the camera. Make

sure you comply with local privacy laws, regulations, and moral

standards.

4. DO NOT use this product for any reason other than general

personal use. DO NOT use it for any illegal or inappropriate

purpose (such as spying, military operations, or unauthorized

investigations).

5. DO NOT use this product to defame, abuse, harass, stalk,

threaten or otherwise violate the legal rights (such as the right of

privacy and publicity) of others.

6. DO NOT trespass into private property of others.

Flight Modes, Functions and Warnings

Flight Modes

To avoid serious injury and property damage, observe the following

rule:

DO NOT switch from P-mode to either A-mode or S-mode unless

you are sufciently familiar with the aircraft’s behavior for each ight

mode, since disabling GPS may result in being unable to land the

aircraft safely.

P-mode or S-mode is preferred for most ight scenarios. Users can

switch to A-mode if P-mode or S-mode is unavailable. When ying in

A-mode, take EXTRA precautions because some features are NOT

available in A-mode. When ying indoors, the aircraft cannot perform

precision hovering when ying above the surfaces that do not have

a clear pattern. Refer to the “Vision System and Infrared Sensing

System” section for complete indoor ying criteria.

1. P-mode (Positioning): P-mode works best when the GPS signal

is strong. The aircraft utilizes the GPS and Vision System to

automatically stabilize itself, navigate between obstacles or

track a moving object. Advanced features such as TapFly and

ActiveTrack are enabled in this mode.

2. S-mode (Sports): S-mode is identical to P-mode in terms of flight

controller settings, except that the handling gain values of the aircraft

are adjusted in order to enhance the maneuverability of the aircraft.

The maximum ight speed of the aircraft is increased in this mode.

3. A-mode (Attitude): When neither the GPS nor the Vision System is

available, the aircraft will only use its barometer for positioning to

control the altitude.

If you intend to switch to modes that disable GPS assistance (e.g., A

mode), you are required to accept the prompted disclaimer to enable

this function. If this function is enabled, you further understand and

agree that data including but not limited to ight telemetry data and

function records could be uploaded to and maintained on a DJI

designated server.

Failsafe and Return to Home

1. The Return to Home feature will NOT work if the GPS signal is

insufcient (GPS signal less than three bars) or if GPS is not active.

2. Press the RTH (Return to Home) Button on the remote controller to

bring the aircraft back to the Home Point instead of turning off the

remote controller.

3. Tall buildings may adversely affect the Failsafe function. Please

adjust the aircraft location, altitude and speed while returning

home to avoid obstacles.

4. Make sure to always y the aircraft within the transmission range

of the remote controller.

5. Only use the Failsafe and Return to Home functions in case

of emergency, as they may be affected by the weather, the

environment, or any nearby magnetic elds.

6. The aircraft cannot avoid obstacles during the Failsafe RTH when

lighting condition is not ideal. Therefore, it is important to set an

appropriate Failsafe altitude before each ight.

7. If the battery life so allows, the aircraft may rst return to the last

position where it had connection with the remote controller during

the Failsafe RTH. As a result, you may observe the aircraft rst

ying away from you, then returning to the home point.

8

©

EN

Low Battery

1. When the Critical Battery Level Warning activates and the

aircraft is descending automatically, you may push the throttle

up to maintain the aircraft's altitude and navigate it to a more

appropriate location for landing.

2. When battery warnings are triggered, promptly bring the aircraft

back to the Home Point or land to avoid losing power during ight

and causing damage to the aircraft, property, animals, and people.

Transformation Function

To reduce the risk of pinching, observe the following rules:

1. Stay away from the aircraft when it is transforming to prevent

injury.

2. DO NOT attempt to catch or hold the aircraft, as the landing gear

will be lowered if the Vision Position System detects an object and

may cause injury.

1. Ensure the landing gear is lowered before landing.

2. Keep the aircraft arms clean, otherwise transformation may be

affected.

3. Never apply lubricants to aircraft arms.

Vision System and Infrared Sensing System

1. The Vision System cannot work properly over surfaces that do

NOT have clear pattern variations. The Vision System is only

effective when the aircraft is at altitudes of 0.3 to 10 meters.

2. The Vision System may NOT function properly when the aircraft is

ying over water.

3. Keep your pets away from the aircraft when the Vision System is

activated, as the sonar sensors emit a high frequency sound that

is only audible to some pets.

4. Note that the Vision System may NOT function properly when the

aircraft is ying too fast or too low.

5. Operate the aircraft cautiously when in any of the following situations:

a. Flying over monochrome surfaces (e.g., pure black, pure white,

pure red, pure green).

b. Flying over highly reective surfaces.

c. Flying at high speeds (over 14m/s at 2 meters or over 5m/s at 1

meter).

d. Flying over water or transparent surfaces.

e. Flying over moving surfaces or objects.

f. Flying in an area where the lighting changes frequently or

drastically.

g. Flying over extremely dark (< 15 lux) or bright (> 10,000 lux)

surfaces.

h. Flying over surfaces that can absorb sound waves (e.g., thick

carpet).

i. Flying over surfaces without clear patterns or texture.

j. Flying over surfaces with identical repeating patterns or

textures (e.g. tiles with same design).

k. Flying over inclined surfaces that will deflect sound waves

away from the aircraft.

l . Tiny obstacles (with less infrared reection energy).

6. In the event of loss of the remote controller’s signal, the aircraft

will hover for 8 seconds and then auto-land if it is in “P” mode.

7. Vision System calibration is required if the aircraft suffers from crashing.

Calibrate the Vision System if the DJI GO 4 app prompts you to do so.

8. Please be mindful of blind spots of the Vision System and Infrared

Sensing System.

9. Do not use other ultrasonic devices with frequency of 40 KHz

when Vision System is in operation. Keep the sensors clean and

at all times. DO NOT temper with the sensors.

10. The Vision System and Infrared Sensing System are not able to

brake and stop the aircraft at a safe distance from an obstacle if

the aircraft speed exceeds 14m/s (31.3 mph).

TapFly

TM

To prevent serious injury or property damage, observe the following

guidelines:

1. DO NOT instruct the aircraft to fly towards people, animals,

small and fine objects (e.g. tree branches and power lines) or

transparent objects (e.g. glass and water).

2. Watch out for potential obstacles in your surrounding area

(especially on the rear, left, and right sides of the aircraft) and

stay clear of them to avoid accidents.

3. Be prepared to take control of the aircraft or press the “STOP”

button on the screen at all times, in case of an emergency.

1. There may be deviations between the expected and actual paths

for your TapFly selection.

2. The selectable range on the screen is limited. You cannot make

TapFly selections near the upper or lower edges of the screen.

3. The TapFly mode may NOT function properly when the aircraft is

ying over water or snow covered area.

4. Be extra cautious when flying in extremely dark (< 300 lux) or

bright (> 10,000 lux) environments.

ActiveTrack

TM

To prevent serious injury and property damage, observe the following

guidelines:

1. Ensure there are no people, animals, small and ne objects (e.g.

tree branches and power lines) or transparent objects (e.g. glass

and water) along the desired tracking path.

2. Watch out for potential obstacles in your surrounding area

(especially on the rear, left, and right sides of the aircraft) and

stay clear of them to avoid accidents.

3. Be prepared to take control of the aircraft or press the “STOP”

button on the screen at all times, in case of an emergency.

4. Ensure there are no obstacles behind the aircraft when it performs

ActiveTrack in the reverse direction.

1. Be extra cautious when using ActiveTrack in any of the following

situations:

a. The movement of the tracked subject is not on a level plane;

b. The tracked subject changes shape drastically while moving;

c. The tracked subject could be blocked or out of sight for a long

time;

d. When the tracked object is in a snow-covered area;

e. The lighting is extremely low (< 300 lux) or high (> 10,000 lux); and

f . The tracked subject has a similar color or pattern as the

surrounding environment.

2. You must follow local privacy laws and regulations when using

ActiveTrack.

Compliance with Regulations & NO Fly Zones

Regulations

To avoid non-compliant behavior, serious injury and property damage,

observe the following rules:

1. DO NOT operate in the vicinity of manned aircraft, regardless of

altitude. (Land immediately if necessary)

2. DO NOT fly the aircraft in densely populated areas, including

cities, sporting events, exhibitions, performances, etc.

3. DO NOT y the aircraft above the authorized altitude. Remain well

clear of and DO NOT interfere with manned aircraft operations. Be

aware of and avoid other aircraft and obstacles at all times.

EN

To avoid non-compliant behavior, serious injury and property

damage, observe the following rules:

1. DO NOT y the aircraft near or inside NO Fly zones specied by

local laws and regulations. The NO Fly zone list includes: airports,

borders between two sovereign countries or regions, major cities/

regions, etc., and is continuously updated.

2. DO NOT y the aircraft above the authorized altitude

3. ALWAYS keep your aircraft within visual line of sight (VLOS), and

use an observer to assist if needed.

4. NEVER use the aircraft to carry illegal or dangerous goods/

payloads.

1. Make sure you understand the nature/type of your ight operation

(such as for recreation, for public use, or for commercial use)

and have obtained corresponding approval and clearance from

the related government agencies before flight. Consult with

your local regulators for comprehensive denitions and specic

requirements. For users operating their aircraft in the United

States, please rst visit http://www.knowbeforeyouy.org/ and take

action appropriate to your circumstances.

2. Please note that remote controlled aircraft may be banned from

conducting commercial activities in certain countries and regions.

Check and follow all local laws and ordinances before ying as

those rules may differ from those stated here.

3. DO NOT fly around sensitive infrastructure or property such as

power stations, water treatment facilities, correctional facilities,

heavily traveled roadways, government facilities, military zones, etc.

4. Respect the privacy of others when using the camera. DO

NOT conduct surveillance operations such as image capture

or video recording on any person, entity, event, performance,

exhibition, and property without authorization or where there is an

expectation of privacy, even if the image or video is captured for

personal use.

5. Please be advised that in certain areas, the recording of images

and videos from events, performances, exhibitions, or commercial

properties by means of a camera may contravene copyright or other

legal rights, even if the image or video was shot for personal use.

NO Fly Zones

DJI always stresses safety during flight, and has therefore developed

various aids to help users comply with local rules and regulations while

ying. We strongly recommend that you update the rmware to the latest

version to ensure the following features are fully updated:

NO Fly Zones

1. NO Fly Zones include but are not limited to major airports around

world, borders between two sovereign countries or regions, major

cities/regions, etc.

2. The complete list of NO Fly Zones is listed on the official DJI

website at http://www.dji.com/flysafe/no-fly and is subject to

periodic updates in line with the latest regulatory requirements

without prior notice.

3. Some NO Fly Zones are comprised of several zones. Each zone

features circles of various sizes. The aircraft will NOT be able

to take off in the inner most zone of the NO Fly Zone, and will

descend to the specied altitude when it approaches the edge of

the inner most zone. Ground station functionality is disabled when

the aircraft is within a NO Fly Zone.

4. Users are NOT able to set up waypoints within NO Fly Zones.

Altitude Limit

1. Fly NO higher than 120 meters (400 feet) above ground level and

stay away from any surrounding obstacles.

2. If you intend to y above the default altitude limit, you are required

to accept the prompted disclaimer to enable the new altitude limit.

If a new altitude limit is set, you further understand and agree that

data including but not limited to ight telemetry data and altitude

limit changes could be uploaded to and maintained on a DJI-

designated server.

This content is subject to change.

Download the latest version from

http://www.dji.com/inspire-2

INSRIRE is a trademark of DJI.

10

©

CHS

使用 DJI INSPIRE

TM

2 系列

飞行器具有一定的安全风险，

不适合未满 18 岁的人士使用。

安全概要仅包含部分的飞行安全知识，

请务必仔细阅读免责声明和安全操作指

引的全部内容。

在开阔无遮挡的环境中飞行 GPS 信号良好在视距内飞行控制飞行高度低于 120 米

安全概要

1. 环境

•

在远离人群的开阔场地飞行。

•

在 -20 至 40℃，天气良好（非下雨，刮风，或极端天气）的环境中飞行。

•

在合法区域飞行，详见第 5 条。

•

室内飞行时请特别小心，部分功能可能无法使用。

2. 检查

•

确保各设备的电量充足。

•

确保螺旋桨无破损并且安装牢固。

•

确保飞行器电机清洁无损。

•

确保相机镜头清洁完好。

•

根据 DJIGO4App提示进行飞行前检查并校准指南针。

•

切勿自行改装飞行器。

3. 操作

•

切勿靠近工作转动中的螺旋桨和电机。

•

在视距内飞行（VLOS）。

•

飞行时向内拨动左摇杆的同时按下返航键将导致飞行器坠落。请仅在紧急情况下使用该功能。

•

飞行过程中请勿接打电话或发送短信，切勿在神志受到酒精或药物的影响下操作飞行器。

•

飞行器依靠视觉定位飞行时注意避开水面或雪地等镜面反射区域。

•

低电量警示时请尽快返航。

•

在失控返航过程中，若光照条件欠佳时，飞行器将不能自主躲避障碍物，如果遥控信号正常，可通过遥控器控制飞行航向。

•

降落后先关闭飞行器再关闭遥控器，以免造成遥控器信号丢失，启动返航模式。请确保电机完全停机后再关闭飞行器和遥控器电源。

•

在使用指点飞行与智能跟随功能时，应时刻准备在紧急情况下手动控制飞行器或点击屏幕上的停止按键。

•

请全程保持对飞行器的控制，切勿完全依赖视觉系统和红外感知系统及 DJIGO4App提供的信息。在特定飞行模式下或特定飞行环境中，

视觉系统和红外感知系统将无法正常工作，主动刹车等功能将不可用。请依靠肉眼观察，合理判断飞行状况，及时躲避障碍物，并根据飞行

环境设置相应飞行及返航高度。

•

降落保护功能（飞行器自动降落时，离地约 2 米时开始检测下方地形）和起落架自动放下功能旨在帮助用户减少误操作，以优化用户操控体

验。但是在特定飞行环境中（如光线不好），视觉系统或无法正常工作，且地表检测存在一定的误检概率，因此，切勿完全依赖系统功能，

请务必全程保持对飞行器的控制并对飞行安全负责。

4. 保养

•

请在每一次飞行前检查并及时更换变形或破损的螺旋桨。

•

飞行器与智能飞行电池适合在 22 摄氏度至 28 摄氏度的环境中长期存放。

•

智能飞行电池保养事宜详见《智能飞行电池安全使用指引》。

5. 限飞与当地法规

•

严禁在限飞区域中飞行。浏览该地址 http://flysafe.dji.com/以获取最新的限飞区域列表。

•

控制飞行高度在 120 米以下，飞行时需严格遵守当地法律法规。

©

11

CHS

飞行时请远离人群、树木、电线、高大建筑物、机场和信号发射塔等。

无线电发射塔、高压线、变电站以及具有磁性的大块金属可能会对遥控信号及指南针产生干扰，威胁飞行安全。

≥10米/秒

下雨、雷电、大雾、下雪、大风（风速每秒 10 米及以上）等天气请勿飞行。

切勿接触工作旋转中的螺旋桨，

否则可能受到严重人身财产损害。

限飞区

详情请访问以下网址 :

http://ysafe.dji.com/no-y

词汇表

本产品使用以下词条对因操作不当可能带来的潜在危险分级加以说明。

注意 : 如果不遵循说明进行操作，可能会导致财产损失和轻微

伤害。

小心 :

如果不遵循说明进行操作，可能会导致财产损失和较严

重伤害。

警告 : 如果不遵循说明进行操作，可能会导致财产损失、重大

事故和严重伤害。

通过阅读整个用户手册，熟悉产品的功能之后

再进行操作。如果没有正确操作本产品可能会

对自身或他人造成严重伤害，或者导致产品损坏和财产损失。本产

品较为复杂，需要经过一段时间熟悉后才能安全使用，并且需要具

备一些基本常识后才能进行操作。如果没有强烈的安全意识，不恰

当的操作可能会导致产品损坏和财产损失，甚至对自身或他人造成

严重伤害。本产品不适合儿童使用。切勿使用非 DJI 提供或建议的

部件，必须严格遵守 DJI 的指引安装和使用产品。本指引文档包含

安全、操作和维护等说明。在进行组装、设置和使用之前务必仔细

阅读用户手册中的所有说明和警告。

12

©

CHS

飞行前检查列表

1. 仅使用 DJI

TM

正品部件并保证所有部件工作状态良好。

2. 确保遥控器，智能飞行电池以及移动设备电池电量充足。

3. 确保无任何异物粘附于相机镜头上并且已将存储卡插入相机。确保

云台能够无阻碍地活动。

4. 确保所有螺旋桨和桨座皆无破损、老化，并正确安装至电机上，且

电机能够正常启动。

5. 根据提示进行指南针校准。根据 DJI GO 4 App 及飞行器提示进行

指南针校准。

6. 确保固件以及 DJI GO 4 App 已经更新至最新版本。

7. 确保飞行场所处于飞行限制区域之外，且飞行场所适合进行飞行。

8. 用户应确保自己不在酒精、药物影响下操控飞行器。

9. 熟悉了解每种飞行模式。熟悉失控返航模式下飞行器的行为。

10. 用户应自行了解当地有关飞行器的法律法规。如有必要，用户需自

行向有关部门申请授权使用飞行器。

11. 当使用视觉定位时，避开在纹理重复度很高的物体表面上空飞行。

更多关于使用视觉定位的信息，请参考“视觉系统与红外感知系统”

一节。

12. 确保 DJI GO 4 App 已运行以协助飞行。如在飞行时未运行 DJI

GO 4 App，在特定情况下（包括飞行器丢失）DJI 将无法向您提

供售后支持或承担相应责任。推荐在 DJI GO 4 App 中开启地图纠

偏功能。

免责声明与警告

本产品并非玩具，不适合未满 18 岁的人士使用。请勿让儿童接触飞行

器，在有儿童出现的场景操作时请务必特别小心注意。

使用本产品之前，请仔细阅读本文档。本声明对安全使用本产品以及

您的合法权益有着重要影响。

本产品是一款多旋翼飞行器，在电源正常工作及各部件未损坏的情况

下将提供轻松自如的飞行体验。访问 http://www.dji.com 获取最新说

明和警告。DJI 保留更新本免责声明的权利。最新的免责声明，请以

www.dji.com 官网上及您邮件接收的版本为准。

务必在使用产品之前仔细阅读本文档，了解您的合法权益、责任和安

全说明；否则，可能带来财产损失、安全事故和人身安全隐患。一旦

使用本产品，即视为您已理解、认可和接受本声明全部条款和内容。

使用者承诺对自己的行为及因此而产生的所有后果负责。使用者承诺

仅出于正当目的使用本产品，并且同意本条款及 DJI 可能制定的任何

相关政策或者准则。使用者了解并同意使用本产品时产生的飞行数据

将会上传并保存在 DJI 的服务器上。

在法律允许的最大范围内，在任何情况下，DJI 均不对任何间接性、后

果性、惩罚性、偶然性、特殊性或刑罚性的损害，包括因您购买、使

用或不能使用本产品而遭受的损失，承担责任（即使 DJI 已被告知该

等损失的可能性亦然）。

在遵从法律法规的情况下，大疆创新公司享有对以上条款的最终解释

权。大疆创新有权在不事先通知的情况下，对本注意事项的条款内容

进行更新，改版或终止。在本指南下载服务终止以前，本注意事项长

期有效。

本产品的文档如有更新，恕不另行通知。请访问 http://www.dji.com，进入

Inspire 2 的产品页面了解最新信息。

使用前须知

为了能使您能更安全使用本产品，DJI 为用户提供了以下文档资料：

1.《物品清单》

2.《免责声明和安全操作指引》

3.《智能飞行电池安全使用指引》

4.《快速入门指南》

5.《用户手册》

建议用户使用《物品清单》进行核对。首先阅读《免责声明和安全操

作指引》，再观看教学视频、使用《快速入门指南》了解使用过程，

飞行前务必仔细阅读《智能飞行电池安全使用指引》。获取更多产品

信息请参考《用户手册》。对于已使用过 DJI 产品的用户，请阅读《快

速入门指南》。确保使用本产品前，您已熟悉本产品各部件的功能，

并且了解有关飞行限制的信息，了解紧急返航的过程及当地与飞行有

关的法律及相关政策。如果您在使用本产品时有任何疑问，请联系 DJI

或者 DJI 授权的代理商。

部件使用须知

原厂配件

为避免可能的伤害和损失，务必遵守以下各项：

1. 使用原厂配件或经过 DJI 认证的配件。使用非原厂配件有可能对飞

行器的安全使用造成危险。

2. 飞行器及各部件内部没有任何异物（如：水、油、沙、土等）。

3. 确保飞行器及其各部件，包含但不限于遥控器、指南针、动力系统

以及电池皆工作正常。

4. 切勿自行改装飞行器及其相关部件，否则可能影响飞行器性能，甚

至引发飞行事故。

遥控器

1. 每次飞行前，确保遥控器电量充满。

2. 遥控器闲置 5 分钟后将发出报警，闲置超过 10 分钟将自动关机。

拨动摇杆可让遥控器恢复为正常工作状态。

3. 使用遥控器上的移动设备支架时，务必压紧避免移动设备滑落。

4. 确保遥控器的移动设备支架安装牢固。

5. 确保遥控器天线展开并调整到合适的位置，以获得最佳的通信效果。

6. 遥控器天线如有损坏将影响使用性能，请及时返修。

7. 如更换遥控器，需要重新对频才能使用。具体对频步骤请参考用户

手册。

8. 如果遥控器被设置为从机，则无法与飞行器对频，也不可用来控制

飞行器飞行。若要实现上述操作，请先连接 DJI GO 4 App 将遥控

器改为主机模式。

9. 确保每次先关闭飞行器电源，再关闭遥控器。

指南针

为避免可能的伤害和损失，务必遵守以下各项：

飞行过程中，一旦出现严重的漂移（如飞行器无法飞直线），请马上降落。

请依据 DJI GO 4 App 或飞行器状态指示灯的提示进行指南针校准。校

准注意事项如下：

©

13

CHS

1. 请勿在强磁场区域或大块金属附近校准 , 如磁矿、停车场、带有地

下钢筋的建筑区域等。

2. 校准时请勿随身携带铁磁物质 , 如手机等。

3. 指南针校准成功后，将飞行器放回地面时，如果受到磁场干扰，DJI

GO 4 App 会显示处理方法，请按显示的方法进行相应操作。

动力系统

高速旋转的螺旋桨和电机可能给人带来伤害或者损失，务必遵守以下

各项：

螺旋桨

1. 每次飞行前请务必检查各螺旋桨是否完好。如有老化、破损或变形，

请更换后再飞行。

2. 确保在飞行器电源保持关闭状态才下对螺旋桨进行任何操作。

3. 由于桨叶较薄，安装时请小心操作，以防意外划伤。

4. 在必要时请使用辅助工具以安装及拆卸螺旋桨。

5. 每次飞行前请检查螺旋桨是否安装正确和紧固。

6. 请勿贴近旋转的螺旋桨和电机（例如用手去接正在降落的飞行器），

以免割伤。

7. 请务必使用 DJI 原厂螺旋桨。

电机

1. 确保电机安装牢固并且能自由旋转。

2. 请勿自行改装电机物理结构。

3. 电机停止转动后，请勿立刻用手直接接触电机，否则可能造成烫伤。

为避免可能的伤害和损失，务必遵守以下各项：

1. 请勿遮挡电机通风孔。

2. 请勿遮挡飞行器壳体上的通风孔。

电机

1. 确保电机内无异物。

2. 若电机无法自由转动，请立刻执行掰杆动作以停止电机转动。

电调

确保飞行器电源开启后，电调有发出提示音。

DJIGO

TM

4App

1. 使用 DJI GO 4 App 前请确保移动设备电源充足。推荐使用平板电

脑以获得最佳体验。

2. 当您在手机上使用 DJI GO 4 App 时，请将注意力集中在操控飞行

器上，切勿在飞行过程中接听来电。

3. 在使用 DJI GO 4 App 期间，仔细阅读所有弹出的安全提示、警示

信息以及免责声明。务必了解当地的相关法律法规。您将对所有违

反当地法律法规的飞行行为负责。

a. 阅读并理解在使用自动起飞和降落时弹出的警示信息。

b. 阅读并理解在使用动态返航点是弹出的警示信息。

c. 阅读并理解在设定超过高度限定范围时弹出的警示信息以及免责

声明。

d. 阅读并理解在切换飞行模式时弹出的警示信息以及免责声明。

4. 当 DJI GO 4 App 提示用户需降落飞行器时，务必及时将飞行器降

落至安全地点。

5. 每次飞行前，务必根据 DJI GO 4 App 提供的飞行前检查列表进行

各项检查。

6. 如果您从未操作过同类飞行器，则推荐您使用 DJI GO 4 App 自带

的模拟器练习飞行器操控技巧。

7. 地图界面中使用的地图需从互联网下载。使用该功能前，建议将移

动设备接入互联网以缓存地图。

8. DJI GO 4 App 主要用于辅助操作，切勿完全依赖于 App，同时请

开启设备声音。

9. 使用 DJI GO 4 App 前，您须同意 DJI GO 4 App 使用条款及 DJI

隐私政策。该使用条款及隐私政策限制了 DJI 的部分法律责任，请

在 App 内仔细阅读。

固 件

为避免可能的伤害和损失，务必遵守以下各项：

在固件升级、校准系统以及设定参数时务必使飞行器远离人群或动物。

1. 务必将固件版本更新至最新以保证飞行安全。

2. 当 DJI GO 4 App 检测到有新版本的固件时，将会显示提示信息，

用户阅读并理解提示信息的全部内容。用户了解并同意，若选择不

升级固件，DJI 将会保留此次操作的信息，并将包括但不限于飞行

数据以及选择结果上传并存放于 DJI 指定的服务器上。

3. 一旦升级飞行器，务必将遥控器也升级到最新固件。

4. 固件升级完成后，遥控器有可能与飞行器连接断开。升级完成后需

要重新对频。

5. 升级固件前确保螺旋桨已经被移除。

相机（选配）

为避免可能的伤害和损失，务必遵守以下各项：

确保相机的散热孔无遮挡；否则高温可能导致相机损坏，甚至烫伤您

或他人。

1. 在使用相机拍摄前检查相机参数设置，确保参数正确。

2. 在使用本设备拍摄重要影像时，请在实际拍摄之前进行数次测试拍

摄，以确保设备处于正常的工作状态。

3. 先关闭电源，再插拨 Micro SD 卡。

4. 必须开启智能飞行电池，才能拷贝相片或者视频。

5. 请正确关闭飞行器电池，否则相机的参数将不能保存，且正在录制

的视频会损坏。

6. DJI 对无法获取视频和相片造成的损失不承担任何责任，比如 SD 卡

损坏、SD 卡内素材丢失。

云台（选配）

1. 云台含有精密部件，若受到碰撞或损伤，精密部件会损坏，可能会

导致云台性能下降。请爱护相机云台免受物理损伤。

2. 云台工作时切勿对其施加外力。

3. 请勿在相机云台上增加任何物体，否则可能会影响云台性能，甚至

烧毁电机。

4. 云台与飞行器之间的连接件以及减震球属于易损部件，务必小心

处置。

5. 在移除与安装相机云台时，务必用手握住相机云台。

14

©

CHS

产品保养

存储与运输

为避免可能的伤害和损失，务必遵守以下各项：

由于线材和小零件可能会对儿童造成危险，所以务必让儿童远离飞行

器的部件。

1. 将智能飞行电池存放于干燥通风处，减少阳光直射以防止电池过热。

若需存放超过三个月，则推荐的存放温度区间为 22 摄氏度至 28 摄

氏度。切勿将电池存放于低于零下 20 摄氏度或高于 45摄氏度的场所。

2. 切勿让相机接触到液体或浸入水中。若相机入水，请及时用松软干

布擦拭。切勿在飞行器落水后立刻开启电源，否则将会对飞行器造

成永久损坏。切勿使用含酒精等易挥发成分的液体清洁相机镜头。

切勿将相机存放于潮湿的场所。

3. 若需要长期存放或长途运输相机，则需要将相机从飞行器上取下。

4. 切勿使用不符合 USB 2.0 规格的数据连接线。

维 护

1. 检查飞行器的各个部件是否曾经受到强烈撞击。如有疑问，请联系

DJI 技术支持人员或 DJI 授权的代理商。

2. 保持电量在 40% - 65% 之间，电池可存放三个月。每隔 3 个月左右

重新充放电一次可以更好地保持电池活性。

3. 对于 Inspire 2 飞行器的用户，建议每经过 50 小时飞行时长后对飞

行进行一次保养。具体保养内容请参考对应的保养手册。

飞行条件要求

天气以及环境需求

请在天气情况以及环境条件良好的情况下进行飞行。为避免可能的伤

害和损失，务必遵守以下各项：

1. 恶劣天气下请勿飞行，如大风（风速五级及以上）、下雪、下雨、

有雾天气等。

2. 飞行时，请保持在视线范围内控制，使飞行器时刻与障碍物、人群、

水面等物体保持至少 10 米以上的距离。

3. 在室内操作飞行器时需格外注意。

4. 在室内飞行时，确保视觉系统已经开启并工作正常。请注意，视觉系

统在由于视觉系统容易受光照强度，物体表面纹理情况的影响，在水

面，或纹理重复度很高的物体表面等场景下请谨慎使用视觉系统。

1. 智能飞行电池性能受到空气密度以及环境温度的影响。

a. 不推荐在低于 -20 摄氏度或高于 40 摄氏度的环境下使用飞行器。

2. 在遭遇碰撞、倾覆、火灾、爆炸、雷击、暴风、龙卷风、暴雨、洪水、

地震、沙暴等灾害时不得使用飞行器。

飞控，视觉系统与红外感知系统和无线通信需求

1. 检查飞行器的各个部件是否曾经受到强烈撞击。如有疑问，请联系

DJI 技术支持人员或 DJI 授权的代理商。

2. 确保在开阔空旷处操控飞行器。高大的钢筋建筑物有可能对飞行器

上的指南针和 GPS 信号造成干扰。

3. 为防止遥控器与其他无线设备相互干扰，务必在关闭其它无线设备

后再使用飞行器遥控器。

4. 禁止在电磁干扰源附近飞行。电磁干扰源包括但不仅限于：高压电

线、高压输电站、移动电话基站和电视广播信号塔。若没有按照上

述规定选择飞行场所，飞行器的无线传输性能将有可能受到干扰影

响，若干扰源过大，飞行器将无法正常飞行。

安全飞行

为避免可能的伤害和损失，务必遵守以下各项：

1. 用户不得在饮酒、吸毒、药物麻醉、头晕、乏力、恶心等其他身体

状态不佳或精神状况不佳的情况下操控本产品。

2. 除非发生特殊情况（如飞行器可能撞向人群），禁止在飞行途中同

时向内拨动左摇杆并按下返航按键。

3. 降落后务必先关闭飞行器然后关闭遥控器。

4. 禁止使用本产品向建筑物、人群或动物投掷、发射任何危险物体。

1. 用户应确保已经对飞行器有足够程度的了解，并清楚所有的紧急返

航措施。

2. 每次飞行前，用户应当准备好飞行计划。请勿鲁莽操控本产品。

3. 在使用本产品的相机拍摄前，请务必尊重他人隐私权。确保在使用

飞行器的相机前，用户已清楚并理解当地有关隐私的法律法规。

4. 禁止使用本产品进行任何违法及不当行为（包括但不限于间谍、军

事行动以及非法调查工作）。

5. 禁止使用本产品进行任何违反他人隐私权的行为。

6. 禁止使用本产品侵犯他人物权。

飞行模式和警示

飞行模式

为避免可能的伤害和损失，务必遵守以下各项：

务必在您熟悉飞行器的特性和各种飞行模式之后，才能进行 P 模式切

换到 A 模式或者 S 模式的操作。不使用 GPS 可能会使飞行器降落存

在安全隐患。

尽可能使用 P 模式进行飞行。在无法使用 P 模式时，用户可切换至 A

模式，某些在 P 模式下具备的功能在 A 模式下将无法使用。所以在使

用 A 模式时需格外小心。在室内飞行时，飞行器将无法在纹理重复度

很高的物体表面上空精确悬停。更多关于使用视觉定位的信息，请参

考“视觉系统与红外感知系统”一节。

1. P 模式（定位）：使用 GPS 模块和视觉系统以实现精确悬停，指点

飞行 , 智能跟随与高级模式等功能。飞行器的感度值被适当调低。

2. S 模式（运动）：与 P 模式相同，使用 GPS 模块和视觉系统以实现

精确悬停。该模式下飞行器的感度值将适当调高，最大飞行速度将

会提升。请特别注意，S 模式下飞行器无法主动刹车和躲避障碍物。

请预留至少 50 米的刹车距离以保障飞行安全。

3. A 模式（姿态）：不使用 GPS 模块与视觉系统进行定位，仅提供姿

态增稳，若 GPS 卫星信号良好可实现返航。

如果用户需要在不同的飞行模式之间进行切换，则用户必须点击从

App 弹出的免责声明以确认该选择。用户清楚并了解，如果开启了在

不同的飞行模式之间切换的功能，则飞行器的飞行数据将会上传至 DJI

指定的服务器。

©

15

CHS

失控返航

1. 失控返航在 GPS 信号欠佳（GPS 信号强度低于三格）的情况下将

失效。

2. 长按智能返航按键以启动智能返航，启动智能返航后，飞行器将会

返回最近记录的返航点。请勿采用关闭遥控器电源的方式强制启动

返航功能。

3. 若返航路线上存在高大建筑物会对飞行器返航安全造成影响，因此

在使用失控返航功能前需要预先设定合理的返航高度。

4. 确保在遥控器通讯范围内操控飞行器。

5. 返航功能会受天气、环境以及地磁等因素影响。

6. 在失控返航过程中，若光照条件欠佳（光照小于 15lux 或者光照大于

10,000lux）时，飞行器将不能自主躲避障碍物。切勿依赖视觉系统。

请保持对飞行器的监控，必要时用户可以操控遥控器躲避障碍物，且

可短按遥控器智能返航按键以取消返航。

7. 失控返航时，如电量允许，飞行器将首先返回至无线信号中断前的

位置点，再直线返回最近记录的返航点。因此，在启动失控返航之后，

飞行器有可能向返航点的反方向飞行。该现象为正常情况。

低电量

1. 严重低电量报警发出后，飞行器将自行下降。此时，用户仍可以推油

门杆拉升飞行高度并控制飞行器航向，使之飞行至合适场所再降落。

2. 当低电量报警发出时，务必将飞行器返航并降落，以防止失去动力

后对飞行器、人以及动物造成危险。

变形机构

为避免可能的伤害和损失，务必遵守以下各项：

1. 飞行器变形过程中，请远离飞行器。

2. 在飞行器的降落过程中，请勿尝试用手接触飞行器。否则有可能会

对视觉系统造成干扰从而导致伤害。

1. 在降落前务必放下飞行器的起落架。

2. 保持机臂干净，否则可能对变形功能造成影响。

3. 请勿使用润滑剂擦拭机臂。

视觉系统与红外感知系统

1. 视觉系统无法在没有纹理特征的表面上正常工作，使用视觉系统时，

飞行器最高飞行高度为 10 米。在 0.3 米以下快速飞行时，视觉系统

可能无法正常工作。

2. 视觉系统在水面上可能无法正常工作。因此，当降落功能触发时，

飞行器可能无法主动回避下方水域。建议用户对飞行保持全程控制，

并根据周围环境进行合理判断，不过度依赖视觉系统。

3. 由于视觉系统会发出人耳无法识别的超声波，该超声波或会引起动

物不安，使用时请远离动物。

4. 视觉系统不适合在飞行器速度过快或过慢的场景下使用。

5. 在以下场景下需谨慎使用视觉系统：

a. 纯色表面（例如纯黑、纯白、纯红、纯绿）。

b. 有强烈反光或者倒影的表面。

c. 飞行器速度不宜过快，如离地1 米处时飞行速度不可超过 5 米 / 秒，

离地 2 米不可超过 14 米 / 秒。

d. 水面或者透明物体表面。

e. 运动物体表面（例如人流上方、大风吹动的灌木或者草丛上方）。

f. 光照剧烈快速变化的场景。

g. 在特别暗（光照小于 15lux）或者特别亮（光照大于 10,000lux）

的物体表面。

h. 对超声波有很强吸收作用的材质表面（例如很厚的地毯）。

i. 纹理特别稀疏的表面。

j. 纹理重复度很高的物体表面（例如颜色相同的小格子砖）。

k. 倾斜度超过 30 度的物体表面（不能收到超声波回波）。

l. 细小的障碍物（红外反射能量较少）。

6. 使用 P 模式飞行，如果遥控器信号断开，并且视觉系统工作正常，

则飞行器将悬停 8 秒后自动降落。

7. 如果飞行器受到强烈碰撞，则有可能导致需要视觉系统重新校准。

详情请参照用户手册。

8. 请注意视觉系统与红外感知系统的盲区。飞行器无法主动规避存在

于盲区内的障碍物。

9. 请勿以任何方式干扰视觉系统及红外感知系统（使两架飞行器侧面

相对将干扰红外感知模块的运行；在飞行器附近开启其他 40 KHz

超声波设备将干扰视觉系统），并确保传感器镜头清晰无污点。

10. 主动刹车功能在飞行器姿态角大于 25 度，或飞行速度高于 14 米 / 秒

的情况下将无法正常工作，请多加注意。

指点飞行

为避免可能的伤害和损失，务必遵守以下各项：

1. 请勿指示飞行器飞向人、动物、细小物体（如：树枝或电线等）、

或透明物体（如：玻璃或水等）。

2. 始终留意来自飞行器四周的物体并通过手动操作来避免事故（如：

碰撞）。

3. 时刻准备在紧急情况下手动控制飞行器或点击屏幕上的“STOP”。

1. 用户选定的指点飞行的方向与飞行器实际飞行的方向可能存在误差。

2. 用户在屏幕上可以选择的指点飞行的范围是有限的，在靠近操作界

面的上部或下部边界处点击时可能无法进行指点飞行。

3. 指点飞行模式在水面上或积雪覆盖区域可能无法正常工作。

4. 在光照条件特别暗（光照小于 300lux）或者特别亮（光照大于

10,000lux）的条件下，请谨慎使用本模式。

智能跟随

1. 请在飞行器的跟随路径上始终避开他人、动物、细小物体（如：树

枝或电线等）、或透明物体（如：玻璃或水等）。

2. 始终留意来自飞行器四周的物体并通过手动操作来避免事故（如：

碰撞）。

3. 时刻准备在紧急情况下手动控制飞行器或点击屏幕上的“STOP”。

4. 当飞行器以倒退的方式进行智能跟随时，务必确保飞行器的周围没

有障碍物。

1. 在以下场景下需谨慎使用智能跟随模式：

a. 当被跟随物体的移动不在水平的地面上时；

b. 当被跟随物体在移动时产生大幅度形变的；

c. 当被跟随物体被长时间遮挡或位于视线外；

d. 当被跟随物体在积雪覆盖的区域；

16

©

CHS

e. 在特别暗（光照小于300lux）或者特别亮（光照大于

10,000lux）的时候；

f . 当被跟随物体与周围的环境颜色或图案非常相近时。

2. 用户在使用智能跟随模式时，请务必遵守当地的法律法规对隐私权

的规定。

法律规范与飞行限制

法律规范

为避免违法行为、可能的伤害和损失，务必遵守以下各项：

1. 切勿在载人飞机附近飞行。必要时立即降落。

2. 禁止在人口密集地区使用飞行器。这些地区包括：城市、体育比赛

场馆、展会、演唱会。

3. 确保飞行器飞行时不会对航线上的大型载人飞行器造成影响。时刻

保持警惕并躲避其他飞行器。

为避免违法行为、可能的伤害和损失，务必遵守以下各项：

1. 禁止操控飞行器使之进入法律规定的禁飞区。禁飞区包括：机场、

边境线以及主要城市。

2. 禁止在超过限定高度的空域飞行。

3. 确保飞行器在您的视距范围内飞行，若有必要可安排观察员帮助您

监控飞行器位置。

4. 禁止使用飞行器搭载任何违法危险物品。

1. 确保您已清楚了解飞行活动的类别（例如：娱乐、公务或商务）。

在飞行前务必获取相关部门颁发的许可证。如有必要，可向当地法

务工作者咨询飞行活动类别的详细定义说明。请注意，在某些地区

与国家禁止使用飞行器进行任何形式的商业行为。

2. 禁止在敏感建筑设施，例如：发电站、水电站、监狱、交通要道、

政府大楼以及军事设施附近使用飞行器。

3. 使用飞行器进行拍摄时务必尊重他人隐私权。禁止使用本产品进行

任何未经授权的监视活动，这些活动包括但不仅限于对他人、团体、

活动、表演、展会或楼宇进行监视。

4. 请注意，在某些地区与国家，尽管不是出于商业目的，但是使用相

机对他人、团体、活动、表演、展会等进行录像或者拍照也将触犯

到版权争议或者他人的合法权益。在某些地区与国家，小型航拍模

型亦被禁止参与任何商业行为。因此，使用之前请仔细了解并遵循

当地法律法规。

飞行限制

DJI 一贯强调飞行安全，为了达到该目的， DJI 提供了多种技术手段以

协助用户能够在符合本地法规的框架下安全使用飞行器。强烈建议用

户从 DJI 官网下载并安装最新版本的固件，以确保飞行限制功能可以

正常使用。飞行限制功能包括：

飞行限制区域

1. 飞行限制区域包括但不仅限于国际大型机场、两国边境线以及大城

市及区域等。

2. 用户可以通过访问 http://ysafe.dji.com/no-y 查询关于飞行限制区

域的完整列表，请注意该列表将随时更新以适应本地法律法规。

3. 某些飞行限制区域是由多个子区域组成。每个子区域有各自的区域

半径。飞行器在最靠近机场的禁飞区域内时将无法起飞。当飞行器

在禁飞区外的限高区域飞行时，飞行高度将受到限制，限飞高度随

着靠近“禁飞区”的距离呈线性递减。另外，用户将无法在限制飞

行区域内使用地面站功能。

4. 用户无法在飞行限制区域内设置航点。

高度限制

1. 保持飞行高度在 120 米以下，飞行时飞行器应远离任何高大建筑物。

2. 如果需要在默认限定高度以上的场所飞行，用户需要阅读了解并点

击从 App 中弹出的免责声明信息后方可进行余下的操作。用户清楚

并了解，如果设定了新的飞行高度，则本次操作的数据以及执行本

次操作以后的飞行数据将会上传至 DJI 指定的服务器上。

本指引如有更新，恕不另行通知。

您可以在 DJI 网站查询最新版本《免责声明和安全操作指引》

http://www.dji.com/inspire-2

INSPIRE 是大疆创新的商标。

Copyright

©

微信扫一扫

©

17

CHT

使用 DJI INSPIRE

TM

2 系列

航拍機具有一定的安全風險，

不適合未滿 18 歲的人士使用。

安全總覽僅包含部分的飛行安全知識，

請務必仔細閱讀《免責聲明與安全指導

方針》的全部內容。

在開闊無遮蔽的環境中飛行 GPS 訊號良好在視線內飛行將飛行高度控制在 120 公尺以下

安全總覽

1. 環境

• 在遠離人群的開闊場地飛行。

• 在 -20 至 40℃，天氣良好 ( 非下雨、刮風或極端天氣 ) 的環境中飛行。

• 在合法區域內飛行，詳情請見第 5 條。

• 室內飛行時請特別小心，部分功能可能無法使用。

2. 檢查

• 確保各設備的電量充足。

• 確保螺旋槳無破損並且安裝牢固。

• 確保航拍機馬達清潔無損。

• 確保相機鏡頭清潔完好。

• 根據 DJI GO 4 應用程式提示，進行飛行前檢查並校準指南針。

• 切勿自行改裝航拍機。

3. 操作

• 切勿靠近運轉中的螺旋槳和馬達。

• 在視線內飛行 (VLOS)。

• 飛行時向內撥動左搖桿的同時按下返航鍵將導致航拍機墜落。請僅在緊急情況下使用該功能。

• 飛行過程中請勿接聽電話或發送簡訊，切勿在意識受到酒精或藥物的影響下操作航拍機。

• 航拍機依靠視覺定位飛行時，請注意避開水面或雪地等鏡面反射區域。

• 發出低電量警告時，請立即返航。

• 在失控返航過程中，若光照條件欠佳時，航拍機將不能自行躲避障礙物，如果遙控訊號正常，可通過遙控器控制飛行航向。

• 降落後，請先關閉航拍機再關閉遙控器，以免造成遙控器訊號遺失而啟動返航模式。請確保電機完全停機後再關閉飛行器和遙控器電源。

• 在使用指點飛行與智能跟隨功能時，應時刻準備在緊急情況下手動控制飛行器或點擊螢幕上的停止按鍵。

• 請全程保持對航拍機的控制，切勿完全依賴視覺系統、紅外線感知系統及 DJI GO 4 應用程式提供的資訊。在特定飛行模式下或特定飛行環

境中，視覺系統和紅外線感知系統將無法正常運作，而主動刹車等功能也無法使用。請依靠肉眼觀察，合理判斷飛行狀況，及時躲避障礙物，

並根據飛行環境來設定相應飛行及返航高度。

• 降落保護功能（飛行器自動降落時，離地約 2 米時開始檢測下方地形）和起落架自動放下功能旨在幫助用戶減少誤操作，以優化用戶操控體

驗。但是在特定飛行環境中（如光線不好），視覺系統或無法正常工作，且地表檢測存在一定的誤檢概率，因此，切勿完全依賴系統功能，

請務必全程保持對飛行器的控制並對飛行安全負責。

4. 保養

• 每一次飛行前，請檢查並及時更換變形或破損的螺旋槳。

• 航拍機與智能飛行電池適合在 22℃ 至 28℃ 的環境中長期存放。

• 如需智能飛行電池保養事宜的相關資訊，請見《智能飛行電池安全使用指南》。

5. 禁航與當地法規

• 嚴禁在禁航區中飛行。請參閱 http://ysafe.dji.com/ 以取得最新的 DJI

TM

禁航區清單。

• 將飛行高度控制在 120 公尺以下，並且飛行時應嚴格遵守當地法律規定。

18

©

CHT

飛行時請遠離人群、樹木、電線、高大建築物、機場和訊號發射塔等。

無線電發射塔、高壓線、變電站及具有磁性的大型金屬物體均可能對遙控訊號及指南針產生干擾，進而威脅飛行安全。

≥10米/秒

下雨、打雷閃電、大霧、下雪、大風 ( 風速每秒 10 公尺以上 ) 等天氣請勿飛行。

請遠離正在旋轉的螺旋槳和馬達，

否則可能會嚴重危及人身及財產安全。

禁航區

詳情請參閱以下網站：

http://ysafe.dji.com/no-y

詞彙表

下列詞彙廣泛用於本產品文件中，針對因操作不當可能帶來的潛在危

險分級加以說明。

注意：如果未按照說明進行操作，可能會導致財產損失和輕微

傷害。

小心：如果未按照說明進行操作，可能會導致財產損失和較嚴

重的傷害。

警告：如果未按照說明進行操作，可能會導致財產損失、重大

事故和嚴重傷害。

於操作前，請務必詳讀整份使用者手冊，以熟

悉產品功能。若未能以安全負責的態度操作本

產品，可能會導致人員受傷、產品受損，或造成其他財物損失。本

產品較為複雜，需要經過一段時間熟悉後才能安全使用，並且需要

具備一些基本常識後才能進行操作。如果沒有強烈的安全意識，不

恰當的操作可能會導致產品損壞和財產損失，甚至對自身或他人造

成嚴重傷害。本產品不適合兒童使用。切勿使用非 DJI 提供或建議

的零組件，必須嚴格遵守 DJI 的指南安裝和使用產品。本指南文件

包含安全、操作和維護等說明。在進行組裝、設定和使用之前，務

必仔細閱讀使用者手冊中的所有說明和警告。

Страница загружается...

dji GO 4, Inspire 2 Руководство пользователя

Похожие модели бренда

Модели других брендов