Philips HU4903/01 Руководство пользователя

HU4902

HU4903

Question?

Contact

Philips

Register your product and get support at

www.philips.com/welcome

Always there to help you

User manual 3

Қолданушының нұсқасы 24

Руководство пользователя 46

3EN

7 Replacing the lters 18

Replace the humidication lter 18

Replace the anti-bacterial lter 19

8 Troubleshooting 20

9 Guarantee and service 22

Order parts or accessories 22

10 Notices 23

Electromagnetic elds (EMF) 23

Compliance with EMF 23

Recycling 23

Contents

1 Important 4

Safety 4

2 Your humidier 7

What’s in the box 7

3 Getting started 8

Prepare for humidication 8

4 Using the humidier 9

Understand the humidity indicator light 9

Understand the healthy air protect alert 9

Understand the healthy air protect lock 9

Switch the humidier on and off 9

Change the fan speed 10

Auto 10

Manual 11

Turbo 11

Set the timer 11

Set the humidity level 12

Water level 12

Rell the water 13

Normal rell 13

Rell without removing the water

tank 14

Easy rell 14

5 Cleaning your humidier 15

Clean the body of the humidier 15

Clean the water tank 15

6 Cleaning the humidication lter 16

Rinse the humidication lter 16

English

4 EN

• Do not use the humidier if the

plug, the power cord, or the

humidier itself is damaged.

• This appliance can be used by

children aged from 8 years and

above and persons with reduced

physical, sensory or mental

capabilities or lack of experience

and knowledge if they have been

given supervision or instruction

concerning use of the appliance

in a safe way and understand the

hazards involved. Cleaning and

maintenance shall not be made

by children without supervision.

• This appliance is not a toy.

Children should be supervised

to ensure that they do not play

with the humidier.

• Do not block the air inlet and

outlet, e.g. by placing items on

the air outlet or in front of the

air inlet.

Caution

• If the power socket used to

power the humidier has poor

connections, the plug of the

humidier becomes hot. Make

sure that you plug the humidier

into a properly connected

power socket.

1 Important

Safety

Read this user manual carefully

before you use the humidier, and

save it for future reference.

Danger

• Do not spray any ammable

materials such as insecticides or

fragrance around the humidier.

• The water in the water tank

is not suitable for drinking. Do

not drink this water and do

not use it to feed animals or to

water plants. When you empty

the water tank, pour the water

down the drain.

Warning

• Check if the voltage indicated

on the bottom of the humidier

corresponds to the local power

voltage before you connect the

humidier.

• If the power cord is damaged,

you must have it replaced

by Philips, a service center

authorized by Philips, or similarly

qualied persons in order to

avoid a hazard.

5EN

• Do not use the humidier near

gas appliances, heating devices

or replaces.

• Always unplug the humidier

after use and before you clean it.

• Do not use the humidier in a

room with major temperature

changes, as this may cause

condensation inside the

humidier.

• When the humidier is not used

for a long time, bacteria and

mold may grow on the lters.

Check the lters before you

start using the humidier again. If

the lter is very dirty with dark

spots, replace it (see chapter

‘Replacing the humidication

lter’).

• The humidier is only intended

for household use under normal

operating conditions.

• Clean the water tank and

humication lter every week to

keep it clean.

• Only ll the water tank with cold

tap water. Do not use ground

water or hot water.

• Do not put any substance other

than water in the water tank.

Do not put fragrance in the

water tank. Use only water (tap,

puried, mineral, any sort of

potable water).

• Always place and use the

humidier on a dry, stable, level,

and horizontal surface.

• Do not place anything on top of

the humidier and do not sit on

the humidier.

• Make sure that the humidier is

well assembled/connected every

time after you clean it or after

you remove the upper cover

and/or water tank for relling.

The humidier must be properly

assembled to deliver a good and

safe performance.

• Only use the original Philips

lter specially intended for this

humidier. Do not use any other

lter.

• Avoid knocking against the

humidier (the air inlet and

outlet in particular) with hard

objects.

• Do not insert your ngers or

objects into the air outlet or

the air inlet to prevent physical

injury or malfunctioning of the

humidier.

• Do not use this humidier when

you have used indoor smoke-

type insect repellents or in

places with oily residues, burning

incense, or chemical fumes.

English

6 EN

• If you do not use the humidier

for a long time, clean the water

tank and dry the humidication

lter..

• If you need to move the

humidier, disconnect the

humidier from the power

supply rst. Then empty the

water tank, and carry the

humidier horizontally.

7EN

What’s in the box

Check and identify the contents of your

package:

Base

Water tank

Float

Anti-bacterial lter

HU4111 (only

available for HU4903)

Humidication lter

HU4101

Float cover

Upper cover

2 Your humidifier

Congratulations on your purchase, and

welcome to Philips!

To fully benet from the support that Philips

offers, register your product at

www.philips.com/welcome.

The Philips humidier brings fresh, humidied

air to your house for the health of your family.

It offers you advanced evaporation system

with NanoCloud technology, using a special

humidication lter which adds H2O molecules

to the dry air, and produces healthy humid

air without formation of water mist. Its

humidication lter retains bacteria, calcium and

other particles from the water. It delivers only

pure humidied air in your home. No more

dry air in the winter season or from the air

conditioning.

Read this user manual carefully before you

install and use the humidier. Save it for future

reference.

User manual

Quick start guide

Warranty

www.philips.com/welcome

User manual

www.philips.com/welcome

Warranty

www.philips.com/welcome

Quick start guide

English

8 EN

3 Place the upper cover back onto the

humidier.

3 Getting started

Prepare for humidication

1 Hold by both sides of the upper cover to

lift it up.

2 Fill the water tank with cold tap water until

the water reaches the maximum water

indication level.

MAX

» The oat begins to oat.

9EN

Understand the healthy air

protect alert

The healthy air protect alert gives you a timely

warning when the water tank needs relling.

When the water in the tank starts getting low, a

red indicator on the control panel starts blinking

to tell you that it is time to rell the tank.

Understand the healthy air

protect lock

The healthy air protect lock always ensures that

your humidier does not work without water

in the tank. When the water tank is empty and

needs to be relled, the healthy air protect lock

shuts off the humidier and a red indicator

lights up. When you rell the water tank

properly, the humidier is turned on again.

Switch the humidier on and

off

1 Put the plug in the wall socket.

4 Using the

humidifier

Understand the humidity

indicator light

The humidier is equipped with a built-in

humidity sensor. The current humidity level is

shown on the display (40, 50 or 60 percent).

Note

• The accuracy of the humidity indication is

approximately plus or minus 5%.

• It takes some time to measure the humidity level in

the room..

Color of the humidity

indicator light

Humidity level

Blue target achieved

Red below target

The humidity indicator light automatically goes

on when the humidier is switched on.

Note

• The built-in humidity sensor measures the humidity

level and automatically selects the appropriate color of

the humidity sensor light. When the desired humidity

level is reached, the color of the humidity sensor light

is in blue. When the humidity level is not reached, the

color of the humidity sensor light becomes red.

English

10 EN

» The humidier releases very ne

invisible mist.

3 Press the button to switch off the

humidier.

Note

• If the water in the tank is getting very low, the

humidier stops humidifying. The red indicator light

remains on.

• It is normal that you cannot see the mist.

Change the fan speed

Auto

Note

• AUTO mode is only available for HU4903.

The automatic mode uses the digital sensor

to constantly monitor the air quality. It turns

your humidier on and off whenever needed

to ensure the humidity level is constantly at

the right level. The default humidity level of

the automatic mode is set at 50%, but you can

change it to your desired humidity level for the

automatic mode. Next time when you switch

on the humidier, it will remember your last

set humidity level, unless you have unplugged

the wall socket. In this case the default humidity

level of 50% is set again.

2 Press the button to switch on the

humidier.

» The humidity sensor light is on.

» The current fan speed is shown.

» The current humidity level is shown.

11EN

Turbo

Note

• Turbo mode is only available for HU4903.

1 Press the SPEED button once or more

times to select the Turbo mode.

» and are on.

Set the timer

With the timer function, you can let the

humidier operate for a set number of hours.

When the set time has elapsed, the humidier

automatically switches off.

1 Press the TIMER button to activate the

timer.

» The TIMER light (1H, 4H or 8H) goes

on.

1 Press the SPEED button to select the

AUTO mode.

Tip

• If the desired humidity level is reached, the humidier

changes to a lower fan speed automatically.

Manual

You can manually select the desired fan speed.

1 Press the SPEED button once or more

times to select the desired fan speed

(AUTO, and/or ).

Tip

• AUTO and Turbo modes are only available for

HU4903.

• For HU4902 and non-auto mode of HU4903: if the

desired humidity level is reached, you can change to

a lower fan speed. On the other hand, if the desired

humidity level is not reached, you can select the fan

speed to humidify the air quickly.

English

12 EN

Note

• If you set the humidity level to no preset level,

the humidity indicator is off but the humidier still

humidies the air.

Water level

When there is not enough water in the water

tank,

• the oat sinks.

• the red indicator light starts blinking.

• the humidier continues to work for one

more hour.

You have to rell the water into the water tank.

Note

• The humidier stops humidifying if you do not rell the

water after more than one hour. The red indicator

light is on.

• It is normal to nd some water left in the tank.

2 Press the TIMER button repeatedly to

choose the number of hours you want the

humidier to operate. The corresponding

TIMER light goes on.

To deactivate the timer function, press the

TIMER button repeatedly until the TIMER light

(1H, 4H or 8H) is out.

Set the humidity level

Note

• Make sure that the water tank is lled with water

before the humidier can function (see the chapter

‘Getting started’, section ‘Prepare for humidication’).

• Press the HUMI button once or more

times to set the desired air humidity to 40,

50, 60 percent or no preset level.

» The humidity light (40, 50 or 60) of

the set humidity level ashes, then

it changes and stays at the current

humidity level.

» The humidity sensor light is in red

if the desired humidity level is not

reached. It turns blue when the desired

humidity level is reached.

Tip

• A comfortable humidity level is between 40% and 60%.

13EN

Rell the water

There are three ways to rell the water into the

water tank: Normal rell, rell without removing

the water tank and easy rell.

Normal rell

1 Remove upper cover by lifting it at both

sides.

2 Remove the water tank from the

humidier base by lifting it at both sides.

3 Fill the water tank with cold tap water until

the water reaches the maximum water

indication level.

MAX

» The oat begins to oat.

4 Place the water tank back on the

humidier base.

5 Place the upper cover back at the

humidier.

English

14 EN

Rell without removing the water

tank

1 Remove the upper cover.

2 Fill a jar with water.

3 Pour the water into the water tank until

it reaches the the maximum water level

indication.

MAX

4 Put the upper cover back to the appliance.

Easy rell

1 Fill a jar with water.

2 Pour the water to the water tank from

the top central opening until the top of

the oat cover emerges and closes the

opening completely.

Tip

• If you see the water starts accumulating, this means the

water tank is full. Stop pouring water.

15EN

5 Cleaning your

humidifier

Note

• Always unplug the humidier before you clean it.

• Never use abrasive, aggressive, or ammable cleaning

agents such as bleach or alcohol to clean any part of

the humidier.

Clean the body of the

humidier

Regularly clean the inside and outside of the

humidier to prevent dust from collecting.

1 Wipe away dust with a soft dry cloth from

the body of the humidier.

2 Clean the air inlet and the air outlet with a

soft dry cloth.

Clean the water tank

Clean the water tank every week to keep it

hygienic.

1 Fill the water tank for 1/3 with water.

2 Add some mild washing-up liquid to the

water in the water tank.

3 Clean the inside of the water tank with

both hands.

4 Empty the water tank into a sink.

English

16 EN

3 Turn the cover of the oat counter

clockwise to remove it.

2

1

4 Remove the humidication lter from the

oat.

5 Soak the humidication lter in tap water

for one hour.

Tap Water

1 hour

6 Cleaning the

humidification

filter

Clean the humidication lter every week to

keep it hygienic.

Rinse the humidication lter

1 Switch off the humidier and unplug it.

2 Remove the water tank from the

humidier.

17EN

9 Turn the cover of the cover of the oat

clockwise to put it back in place.

2

1

6 Rinse the humidication lter under a

slowly running tap. Do not squeeze or

wring the lter when cleaning.

7 Let excess water drip off the

humidication lter.

Note

• Do not put the humidication under direct sunlight.

8 Assemble the humidication lter round

the oat.

English

18 EN

7 Replacing the

filters

Replace the humidication

lter

Replace the humidication lter every three

months for optimal performance. If the lter

is in good condition, you could use it for a

longer period of time. Make sure to replace the

humidication lter at least once a year.

Note

• Use only Philips original humidication lter, HU4101.

Tip

• Register your product at www.Philips.com for further

information on how to replace your lter.

1 Switch off the humidier and unplug it.

2 Remove the water tank from the appliance.

3 Turn the cover of the oat counter

clockwise to remove it.

2

1

4 Remove the old humidication lter from

the humidier.

19EN

Replace the anti-bacterial

lter

Note

• The anti-bacterial lter is only available for HU4903.

• Use only Philips original anti-bacterial lter, HU4111

Replace the anti-bacterial lter at least once a

year to prevent the bacteria from growing in

the water tank.

• Pull and remove the old anti-bacterial lter.

Then, discard it.

• Push the new anti-bacterial lter down to

replace.

5 Remove the packaging material from the

new humidication lter.

6 Assemble the new humidication lter

round the oat

7 Turn the cover of the oat clockwise to

put it back in place.

2

1

Tip

• You can easily nd more information about how to

replace the lter in our web page or by calling our

Consumer Care Center.

English

20 EN

8 Troubleshooting

This chapter summarizes the most common problems you could encounter with the humidier. If you

are unable to solve the problem with the information below, contact the Consumer Care Center in

your country.

Problem Possible solution

The humidier does

not work.

• Make sure that there is power supply to the humidier.

• Make sure that the water tank is lled with water and placed properly

onto the humidier.

There is no air

humidication.

Make sure that the water tank is lled with water and placed properly into the

humidier.

The water tank

leaks.

• Make sure that the humidier is not overlled with water.

• Make sure that the humidier is well assembled/connected every time

after you clean it or after you remove the upper cover and/or water tank

for relling.

• Make sure that water tank is placed properly. If the problem persists,

contact the Consumer Care Center in your country.

I do not see the

current humidity

indication change.

• Make sure that you have wrapped the humidication lter round the oat.

• The humidication lter is dirty. Rinse and/or descale the humidication

lter (see the chapter ‘Clean the humidication lter’).

• Your room might have too much ventilation. Please close doors and

windows.

• Your room size is too big. The recommended room size is 50m² for both

HU4902 and HU4903.

There are some

white deposits on

the humidication

lter.

The white deposits are called scale and they consist of minerals from the water.

Scale on the humidication lter affects the humidifying performance, however

it does not harm your health. Please follow the cleaning instructions in the user

manual.

The lter turns

yellowish after

some time.

The yellow deposits is a natural effect of the wick material, and it has no impact

on humidication performance. Clean the humidication lter frequently to

remove the scale, and replace the humidication lter every three month.

There is unpleasant

smell coming out

from the humidier.

• Make sure that the water tank is lled with water.

• Clean the humidication lter (see the chapter ‘Clean the humidication

lter’).

Страница загружается...

Philips HU4903/01 Руководство пользователя

Похожие модели бренда

Модели других брендов