Hilti DD 150-U Инструкция по эксплуатации

DD 150-U

English 1

Italiano 29

Slovenščina 59

Hrvatski 86

Srpski 114

Русский 142

Українська 173

Қазақ 204

Български 234

Română 265

Ελληνικά 295

Türkçe 325

ﻋﺮﺑﻲ 354

日本語 383

한국어 410

繁體中文 437

中文 461

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

DD 150-U

en Original operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

it Istruzioni originali . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

sl Originalna navodila za uporabo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

hr Originalne upute za uporabu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

sr Originalno uputstvo za upotrebu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

ru Перевод оригинального руководства по эксплуатации . . . . . . . . . . . . . . . . . . . . 142

uk Оригінальна інструкція з експлуатації . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173

kk Түпнұсқа пайдалану бойынша нұсқаулық . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204

bg Оригинално Ръководство за експлоатация . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234

ro Manual de utilizare original . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265

el Μετάφραση οδηγιών χρήσης από το πρωτότυπο . . . . . . . . . . . . . . . . . . . . . . . . . 295

tr Orijinal kullanım kılavuzu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325

ar ﺩﻟﻴﻞﺍﻻﺳﺘﻌﻤﺎﻝﺍﻷﺻﻠﻲ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 354

ja オリジナル取扱説明書 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383

ko 오리지널 사용 설명서 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 410

zh 原始操作說明 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 437

cn 原版操作说明 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 461

*2204402*

2204402 English 1

Original operating instructions

1 Information about the documentation

1.1 About this documentation

• Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free

handling and use of the product.

• Observe the safety instructions and warnings in this documentation and on the product.

• Always keep the operating instructions with the product and make sure that the operating instructions

are with the product when it is given to other persons.

1.2 Explanation of symbols used

1.2.1 Warnings

Warnings alert persons to hazards that occur when handling or using the product. The following signal words

are used:

DANGER

DANGER !

▶ Draws attention to imminent danger that will lead to serious personal injury or fatality.

WARNING

WARNING !

▶ Draws attention to a potential threat of danger that can lead to serious injury or fatality.

CAUTION

CAUTION !

▶ Draws attention to a potentially dangerous situation that could lead to slight personal injury or damage

to the equipment or other property.

1.2.2 Symbols in the documentation

The following symbols are used in this document:

Read the operating instructions before use.

Instructions for use and other useful information

Dealing with recyclable materials

Do not dispose of electric equipment and batteries as household waste

1.2.3 Symbols in the illustrations

The following symbols are used in illustrations:

These numbers refer to the corresponding illustrations found at the beginning of these operating

instructions

The numbering reflects the sequence of operations shown in the illustrations and may deviate

from the steps described in the text

Item reference numbers are used in the overview illustrations and refer to the numbers used in

the product overview section

This symbol is intended to draw special attention to certain points when handling the product.

2 English 2204402

*2204402*

1.3 Product-dependent symbols

1.3.1 "Must do" symbols

The following "must do" symbols are used:

Wear eye protection

Wear a hard hat

Wear ear protection

Wear protective gloves

Wear protective footwear

Wear light respiratory protection

1.3.2 Symbols on the product

The following symbols are used on the product:

Analysis data

Hole-starting mode

Rated speed under no load

Alternating current

Diameter

Do not transport by crane

Bluetooth (optional)

Locking mechanism opened

Locking mechanism closed

The product supports wireless data transmission compatible with iOS and Android platforms.

*2204402*

2204402 English 3

1.4 Information notices

On the drill stand, base plate and diamond core drilling machine

On the drill stand and on the vacuum base plate

Upper half of the image: An additional means of securing the drill stand

must be employed when the machine is used for horizontal drilling with the

vacuum securing method.

Lower half of the image: Use of the vacuum securing method without

an additional means of securing is prohibited for drilling in an upward

direction.

On the diamond core drilling machine

Use of the water collection system in combination with a wet-type industrial

vacuum extractor is mandatory for upward wet drilling.

On the diamond core drilling machine

This product is equipped with Bluetooth (optional).

1.5 Product information

products are designed for professional users and only trained, authorized personnel are

permitted to operate, service and maintain the products. This personnel must be specifically informed about

the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by

untrained personnel or if used not in accordance with the intended use.

The type designation and serial number are printed on the rating plate.

▶ Write down the serial number in the table below. You will be required to state the product details when

contacting Hilti Service or your local Hilti organization to inquire about the product.

Product information

Type: DD 150-U

DD 150-U

Generation: 03

Serial no.:

4 English 2204402

*2204402*

1.6 Declaration of conformity

We declare, on our sole responsibility, that the product described here complies with the applicable directives

and standards. A copy of the declaration of conformity can be found at the end of this documentation.

The technical documentation is filed here:

Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany

2 Safety

2.1 General power tool safety warnings

WARNING Read all safety warnings, instructions, illustrations and specifications provided with this

power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

▶ Keep work area clean and well lit. Cluttered or dark areas invite accidents.

▶ Do not operate power tools in explosive atmospheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

▶ Keep children and bystanders away while operating a power tool. Distractions can cause you to lose

control.

Electrical safety

▶ Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of

electric shock.

▶ Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

▶ Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the

risk of electric shock.

▶ Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the

risk of electric shock.

▶ When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of electric shock.

▶ If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of electric shock.

Personal safety

▶ Stay alert, watch what you are doing and use common sense when operating a power tool. Do

not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A

moment of inattention while operating power tools may result in serious personal injury.

▶ Use personal protective equipment. Always wear eye protection. Protective equipment such as a

dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will

reduce personal injuries.

▶ Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power

source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on

the switch or energising power tools that have the switch on invites accidents.

▶ Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may result in personal injury.

▶ Do not overreach. Keep proper footing and balance at all times. This enables better control of the

power tool in unexpected situations.

▶ Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

▶ If devices are provided for the connection of dust extraction and collection facilities, ensure these

are connected and properly used. Use of dust collection can reduce dust-related hazards.

▶ Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore

tool safety principles. A careless action can cause severe injury within a fraction of a second.

*2204402*

2204402 English 5

Power tool use and care

▶ Do not force the power tool. Use the correct power tool for your application. The correct power tool

will do the job better and safer at the rate for which it was designed.

▶ Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be repaired.

▶ Disconnect the plug from the power source and/or remove the battery pack, if detachable, from

the power tool before making any adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the power tool accidentally.

▶ Store idle power tools out of the reach of children and do not allow persons unfamiliar with the

power tool or these instructions to operate the power tool. Power tools are dangerous in the hands

of untrained users.

▶ Maintain power tools and accessories. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool’s operation. If damaged,

have the power tool repaired before use. Many accidents are caused by poorly maintained power

tools.

▶ Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

▶ Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking

into account the working conditions and the work to be performed. Use of the power tool for

operations different from those intended could result in a hazardous situation.

▶ Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Service

▶ Have your power tool serviced by a qualified repair person using only identical replacement parts.

This will ensure that the safety of the power tool is maintained.

2.2 Drill safety warnings

Safety instructions for all operations

▶ Use the auxiliary handle(s). Loss of control can cause personal injury.

▶ Brace the tool properly before use. This tool produces a high output torque and without properly

bracing the tool during operation, loss of control may occur resulting in personal injury.

▶ Hold the power tool by insulated gripping surfaces, when performing an operation where the

cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live"

wire may make exposed metal parts of the power tool "live" and could give the operator an electric

shock.

Safety instructions for all operations

▶ Use the auxiliary handle(s). Loss of control can cause personal injury.

▶ Hold the power tool by insulated gripping surfaces, when performing an operation where the

cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live"

wire may make exposed metal parts of the power tool "live" and could give the operator an electric

shock.

Safety instructions when using long drill bits

▶ Never operate at higher speed than the maximum speed rating of the drill bit. At higher speeds,

the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal

injury.

▶ Always start drilling at low speed and with the bit tip in contact with the workpiece. At higher

speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in

personal injury.

▶ Apply pressure only in direct line with the bit and do not apply excessive pressure. Bits can bend

causing breakage or loss of control, resulting in personal injury.

2.3 Diamond drill safety warnings

▶ When performing drilling that requires the use of water, route the water away from the operator’s

work area or use a liquid collection device. Such precautionary measures keep the operator’s work

area dry and reduce the risk of electrical shock.

▶ Operate power tool by insulated grasping surfaces, when performing an operation where the

cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a “live”

6 English 2204402

*2204402*

wire may make exposed metal parts of the power tool “live” and could give the operator an electric

shock.

▶ Wear hearing protection when diamond drilling. Exposure to noise can cause hearing loss.

▶ When the bit is jammed, stop applying downward pressure and turn off the tool. Investigate and

take corrective actions to eliminate the cause of the bit jamming.

▶ When restarting a diamond drill in the workpiece check that the bit rotates freely before starting. If

the bit is jammed, it may not start, may overload the tool, or may cause the diamond drill to release from

the workpiece.

▶ When securing the drill stand with anchors and fasteners to the workpiece, ensure that the

anchoring used is capable of holding and restraining the machine during use. If the workpiece is

weak or porous, the anchor may pull out causing the drill stand to release from the workpiece.

▶

When securing the drill stand with a vacuum pad to the workpiece, install the pad on a smooth,

clean, non-porous surface. Do not secure to laminated surfaces such as tiles and composite

coating. If the workpiece is not smooth, flat or well affixed, the pad may pull away from the workpiece.

▶ Ensure there is sufficient vacuum before and during drilling. If the vacuum is insufficient, the pad

may release from the workpiece.

▶ Never perform drilling with the machine secured by the vacuum pad only, except when drilling

downwards. If the vacuum is lost, the pad will release from the workpiece.

▶ When drilling through walls or ceilings, ensure to protect persons and the work area on the other

side. The bit may extend through the hole or the core may fall out on the other side.

▶ When drilling overhead, always use the liquid collection device specified in the instructions. Do

not allow water to flow into the tool. Water entering the power tool will increase the risk of electric

shock.

2.4 Additional safety precautions

Personal safety

▶ Do not tamper with or attempt to make alterations to the product.

▶ The product is not intended for use by debilitated persons who have received no special training.

▶ Check that the side handle is fitted correctly and tightened securely. Always hold the tool with both

hands on the grips provided. In accordance with the applications for which it is designed, the product

produces a high torque. Grip the side handle as far to the outside as possible.

▶ Never use continuous running lock in handheld operation!

▶ Always support the power tool firmly in preparation for use. This power tool produces high torque. If the

power tool is not securely supported at all times during operation loss of control can result and lead to

injuries.

▶ Do not touch rotating parts. Switch the product on only after it is in position at the workpiece. Touching

rotating parts, especially rotating accessory tools, can result in injury.

▶ Avoid skin contact with drilling slurry.

▶ Dust from materials such as lead-based paint, certain types of wood and concrete/masonry/stone

containing quartz, minerals or metal can be harmful to health. Contact with or inhalation of the dust can

cause allergic reactions and/or respiratory or other diseases among operators or bystanders. Certain

kinds of dust such as oakwood and beechwood dust are classified as carcinogenic, especially in

conjunction with additives for wood conditioning (chromate, wood preservative). Only specialists are

permitted to handle material containing asbestos. Use a dust removal system that is as effective

as possible. To achieve a high level of dust collection, use a suitable vacuum extractor of the type

recommended by Hilti for wood dust and/or mineral dust and which is designed for use with this power

tool. Make sure that the workplace is well ventilated. It is advisable to wear a respirator appropriate

for the type of dust generated. Comply with national regulations applicable to the materials you will be

working with.

▶ The diamond core drilling machine and the diamond core bit are heavy. There is a risk of crushing parts

of the body. The user and any other persons in the vicinity must wear of the product while the power

tool is suitable eye protection, a hard hat, ear protection, protective gloves and safety footwear while the

machine is in use.

▶ Improve the blood circulation in your fingers by relaxing your hands and exercising your fingers during

breaks between working.

▶ If work involves break-through, always secure the area on the side opposite where the work is carried

out. Pieces of debris could drop out and/or fall down and injure other persons.

▶ Wear eye protection, protective gloves and, if you are not using a dust removal system, wear light

respiratory protection. Flying fragments present a risk of injury to the body and eyes.

*2204402*

2204402 English 7

Power tool use and care

▶ Make sure that the product is correctly and securely mounted on the drill stand.

▶ Always make sure that an end stop is installed on the drill stand as otherwise the safety-relevant end-stop

function is not implemented.

▶ Make sure that the accessory tools used have a mounting system suitable for use with the to the product

and they are secured in the chuck correctly.

▶ The supply cord, the extension cord and the suction hose away to the rear of the product always. This

helps to avoid tripping over the cord or hose while working.

▶ Do not use damaged supply cord or hoses.

▶ Set up the mount on a firm, smooth and horizontal surface. It will not be possible to guide the power tool

smoothly and safely if the mount can slip or wobble.

▶ Check the nature of the surface. Rough surfaces may reduce holding power. Coatings or composite

materials may pull away from the surface while you are working.

▶ Do not overload the device and do not use it as a substitute for a ladder or platform. Overloading the

device or standing on it may shift its center of gravity to a higher position, causing it to tip over.

▶ When taking a break, lay the diamond core drilling machine down on a suitable surface where it will be

safe. Wait until the diamond core drilling machine has come to a complete stop before you lay it down.

▶ Disconnect the diamond core drilling machine from the electric supply before removing the core or tools.

Electrical safety

▶ Avoid using extension cords with multiple power outlets and the simultaneous use of several products.

▶ The product may be operated only when connected to an adequately rated electric supply equipped with

an earth (ground) conductor.

▶ Before beginning work, check the working area (e.g. using a metal detector) to ensure that no concealed

electric cables or gas and water pipes are present. External metal parts of the product can become live,

for example, when an electric cable is damaged accidentally. This constitutes a serious risk of electric

shock.

▶ Make sure that the supply cord cannot be damaged as the carriage advances.

▶ Never operate the product without the supplied PRCD (for products without PRCD: Never operate the

machine without an isolating transformer). Test the PRCD each time before use.

▶ Check the machine’s supply cord at regular intervals and have it replaced by a qualified specialist if

found to be damaged. If the machine’s supply cord is damaged it must be replaced with a specially

prepared and approved supply cord available from Hilti Customer Service. Check extension cords at

regular intervals and replace them if found to be damaged. Do not touch the supply cord or extension

cord if it is damaged while working. Disconnect the supply cord plug from the power outlet. Damaged

supply cords or extension cords present a risk of electric shock.

▶ Never operate the product when it is dirty or wet. Dust (especially dust from conductive materials) or

dampness adhering to the surface of the machine may, under unfavorable conditions, lead to electric

shock. Dirty or dusty machines should thus be checked by Hilti Service at regular intervals, especially if

used frequently for working on conductive materials.

▶ Tip the diamond core drilling machine in order to empty a filled core bit. Make sure that the water does

not get onto the diamond core drilling machine.

Workplace

▶ Approval must be obtained from the site engineer or architect prior to beginning drilling work. Drilling

work on buildings and other structures may influence the static equilibrium of the structure, especially

when steel reinforcing bars or load-bearing components are cut through.

▶ If the drill stand is not properly fastened, always move the diamond core drilling machine mounted on

the drill stand all the way down in order to prevent the stand from falling over.

▶ Keep the supply cord, extension cord, water hose and vacuum hose away from rotating parts of the

machine.

▶ Use of the water collection system in conjunction with a wet-type industrial vacuum extractor is a

mandatory requirement for wet drilling overhead.

▶ Use of the vacuum securing method without an additional means of fastening is prohibited for drilling in

an upward direction.

▶ For horizontal drilling, the drill stand may not be used without being additionally secured.

▶ In the hand-guided mode, always hold the diamond core drilling machine securely with one hand on the

on/off switch.

▶ Do not switch on the diamond core drilling machine until it is in the desired position.

8 English 2204402

*2204402*

3 Description

3.1 Parts of the tool and operating controls

3.1.1 Diamond core drilling machine DD 150-U 1

@

Chuck

;

Gearing section

=

Motor

%

Continuous-running lock

&

Multifunction display

(

Grip

)

Operating button (analysis data)

+

Operating button (hole-starting mode)

§

Gear switch

/

Side handle

:

Water flow rate indicator

∙

Water swivel / suction head

$

Carbon-brush cover

£

On/off switch

|

Supply cord with PRCD

¡

Type identification plate

Q

Interface plate

W

Water flow regulator

E

Water connection

R

Suction hose connector

T

Screw plug (rinsing/suction head)

3.1.2 Drill stand DD-ST 150-U CTL 2

Z

Column

U

Grip

I

Supply cord holder

O

Locking pin

P

Depth gage

Ü

Hole center indicator

[

Vacuum hose connector

]

Leveling indicator

Æ

Pressure gage

º

Vacuum relief valve

~

Carriage

A

End stop screw

S

Adjusting screws for carriage play (2x)

D

Carriage lock

F

Leveling screws (4x)

G

Vacuum seal

H

Base plate

J

Adjusting lever

3.1.3 Accessories (optional) 3

K

Hand wheel

L

Lever

Ö

Wheel assembly

Ä

Threaded spindle

†

Column swivel

Œ

Vacuum base plate

Å

Water collector holder

ª

Water collector

¶

Eccentric pin

Y

Machine mount

X

Clamping screw

C

Depth gage

V

Drilling bush adapter

B

Rubber ring

N

Centering ring

*2204402*

2204402 English 9

3.2 Intended use

The product described is an electrically powered diamond core drilling machine. It is designed for hand-

guided wet and dry drilling, for wet drilling with a drilling rig as through-holes and I or blind holes in (reinforced)

mineral substrates.

• The tool may be operated only when connected to a power source providing a voltage and frequency in

compliance with the information given on the type identification plate.

3.3 Bluetooth

®

This product is equipped with Bluetooth (optional).

Bluetooth is a wireless data transfer system by which the two Bluetooth-enabled products can communicate

with each other over a short distance.

To ensure a stable Bluetooth connection there must be a clear line of sight between the connected devices.

Application of Bluetooth functions on this product:

• Automatic switching on and off of a Hilti water supply system during drilling operation.

• Displaying service messages of a connected water supply system on display of the diamond core drilling

machine.

• Connection to a mobile device via the Hilti Connect App for service functions and transfer of product-

related analysis data.

Switching Bluetooth on/off

Hilti products are delivered with Bluetooth turned off. On first start up, Bluetooth is switched on

automatically.

•

To switch off, press and hold down the buttons and simultaneously for at least 10 seconds.

•

To switch on, press the buttons and simultaneously.

Connecting products

The pairing with the water treatment system is sustained until the diamond core drilling machine is paired to

anotherwater treatmentsystem, or Bluetooth is switchedoff. Pairing is also sustained even when the products

are switched off and then on again; paired products always automatically re-establish their paired connection.

• To pair with a Hilti water treatment system or mobile terminal device, with Bluetooth switched on

simultaneously press the and buttons.

The time frame for the connection to a different diamond core drilling machine is approximately 2

minutes. When the 2 minutes have expired, the connection process will be canceled.

License

Bluetooth is not available in all countries.

The Bluetooth

®

word mark and the logo are registered trademarks and the property of Bluetooth SIG, Inc.

and Hilti has been granted a license to use these trademarks.

3.4 Display symbols and explanation of the multifunction display on the diamond core drilling

machine

For the following information to be displayed, the diamond core drilling machine must be ready for operation

(plugged in and PRCD switched on).

The displays may vary depending on the gear selection and the type of application.

Starting screen

The start screen is displayed when the diamond core drilling machine is

supplied with power. The Bluetooth status, the personalized name and the

serial number of the diamond core drilling machine are shown on the start

screen.

• You can change the product name that appears on the screen in the

Hilti Connect app (default: 'Your name here').

Spirit level

The diamond core drilling machine is not switched on. The display helps

you to level the system and to align the drill stand when drilling at an angle.

The display shows the alignment of the diamond core drilling machine

symbolically and in degrees.

• Angular accuracy at room temperature: ±2°

10 English 2204402

*2204402*

Gear indicator

The diamond core drilling machine is running under no load. The display

helps ensure that the gear engaged is suitable for the diamond core bit

used. At top left, the display shows the gear engaged and in the center,

the recommended core bit diameter range in millimeters and inches for this

gear.

• The recommended core bit diameter range varies depending on whether

the diamond core drilling machine is operated in the hand-guided or

stand-guided mode.

Hand-guided operation

The continuous-running lock is deactivated. The device is in the hand-

guided mode.

• This information is shown in the display only for a few seconds.

Stand-guided mode

The continuous-running lock is activated. The device is in the stand-guided

mode.

• This information is shown in the display only for a few seconds.

Hole-starting mode is

active

The diamond core drilling machine is switched off or running under no load.

This function makes it possible to start holes with low vibration when using

large-diameter core bits. This function can be deactivated at any time by

pressing the button again.

• This information is shown in the display only for a few seconds.

Remaining running time in

hole-starting mode

The diamond core drilling machine is drilling and the hole-starting mode is

active. The display shows the time remaining until the diamond core drilling

machine automatically switches off.

• To protect the diamond core drilling machine, hole-starting mode is

switched off automatically after a maximum of 2 minutes.

This information is shown in the display only for a few seconds.

Hole-starting mode deacti-

vated

Hole-starting mode has been deactivated. Speed and power of the dia-

mond core drilling machine increase and drilling can proceed

• This information is shown in the display only for a few seconds.

Hole-starting mode cannot

be activated

The diamond core drilling machine is drilling. The button for activating hole-

starting mode was pressed while the diamond core drilling machine was

under load or was in cool-down mode.

• This information is shown in the display only for a few seconds.

Drilling performance

indicator: Contact pressure

is too low

The diamond core drilling machine is drilling and the hole-starting mode

is not activated. The information displayed helps ensure that the diamond

core drilling machine is being operated in the optimal range.

• Background color: Yellow.

Contact pressure is too low. Increase the contact pressure.

*2204402*

2204402 English 11

Drilling performance

indicator: Optimum contact

pressure

The diamond core drilling machine is drilling and the hole-starting mode is

not active. The information displayed helps ensure that the diamond core

drilling machine is being operated in the optimal range.

• Background color: Green.

Contact pressure is at the optimum level.

Rated current limit has

been exceeded

The diamond core drilling machine is drilling and the hole-starting mode is

not activated. Rated current has exceeded the limit of 20 A.

• Contact pressure is too high. Reduce the contact pressure.

Drilling performance

indicator: Contact pressure

is too high

The diamond core drilling machine is drilling and the hole-starting mode

is not activated. The information displayed helps ensure that the diamond

core drilling machine is being operated in the optimal range.

• Background color: Red.

Contact pressure is too high. Reduce the contact pressure.

Status bar for information

The status bar displays various information regarding the machine’s current

status, such as the gear engaged or the activated hole-starting mode.

Status bar for warning

messages

The status bar displays various warnings regarding the tool's current

status which do not result in the diamond core drilling machine stopping

immediately.

Bluetooth ON

Bluetooth is activated in the basic setting.

To switch off the Bluetooth function, press and hold down the buttons

and simultaneously for 10 seconds with the motor switched off.

• This information is shown in the display only for a few seconds.

Bluetooth OFF

Bluetooth is deactivated. The diamond core drilling machine cannot be

connected to additional device or accessories.

•

To switch on the Bluetooth function, press the buttons and

simultaneously with the motor switched off.

Connection has been

established

The diamond core drilling machine is ready to connect to another device or

accessory.

To start the process of establishing the connection, simultaneously press

the and buttons and hold them down for at least 1 second.

• The time frame for the connection to another device is 2 minutes. When

the 2 minutes have expired, the connection process will be canceled.

The paired connection between another device or accessory and the

diamond core drilling machine is sustained until:

• The diamond core drilling machine is paired to a device or accessory of

the same type.

• Bluetooth is switched off.

12 English 2204402

*2204402*

Connection interrupted

An existing Bluetooth connected to a device or accessory has been inter-

rupted.

Analysis of running time

The display shows drilling time (diamond core drilling machine actually

drilling) at the top and operating hours (diamond core drilling machine

switched on) at the bottom. Both figures are shown in hours, minutes and

seconds.

To reset drilling time and all other analysis data, press the button and

hold it down for a few seconds.

• The information shown on the display disappears automatically after a

few seconds or when you press the button again.

•

Pressing the again takes you to the next analysis data.

Analysis of operating

behavior

This display shows contact pressure during drilling time as a percentage

(%). This enables user behavior to be optimized.

• The information shown on the display disappears automatically after a

few seconds or when you press the button again.

•

Pressing the again takes you to the next analysis data.

Analysis of drilling direction

This display shows an evaluation of the drilling directions in %.

• The information shown on the display disappears automatically after a

few seconds or when you press the button again.

•

Pressing the again takes you to the next analysis data.

Analysis of gear selection

This display shows an evaluation of the duration of use of the respective

gear in %. The arrow always points to the gear with the highest rate of use.

• The information shown on the display disappears automatically after a

few seconds or when you press the button again.

•

Pressing the again takes you to the next analysis data.

Analysis of use

This display shows the use of the diamond core drilling machine in the

hand-guided and in the stand-guided mode in %.

• The information shown on the display disappears automatically after a

few seconds or when you press the button again.

•

Pressing the again takes you to the next analysis data.

Connected devices

This display provides an overview of all devices and accessories connected

to the diamond core drilling machine.

• The information shown on the display disappears automatically after a

few seconds or when you press the button again.

•

Pressing the again takes you to the next analysis data.

Start connection setup

Start connection setup process at the diamond core drilling machine first

and then at the device or accessory you want to connect.

To start the process of establishing the connection, simultaneously press

the and buttons and hold them down for at least 1 second.

• The information shown on the display disappears automatically after a

few seconds or when you press the button again.

•

Pressing the again takes you to the next analysis data.

Gear selector not latched

The gear selector is in an intermediate position or is not correctly latched.

Operate the gear selector until it latches completely.

Страница загружается...

Hilti DD 150-U Инструкция по эксплуатации

Похожие модели бренда

Модели других брендов