Samsung SR20R7250WD Руководство пользователя

Тип
Руководство пользователя
Page: 108 Print Color: Black Part Code DJ68-00827H
date: 2019-04-09 Post Processing : Cut Rev No 00
ART WORK SPEC
Product
Model/PJT
Changes Note: NEW
Vacuum CleanerHQ R&D PIC: Jungran Kim
Material: Wood Free 80g VR7000M
Design: Hyunwoo Lim
Size: 182mm x 257mm
POWERbot
User manual
VR20R72**** Series
Before operating this unit, please read the instructions carefully.
For indoor use only.
DJ68-00827H-00
1_VR7200_EN_DJ68-00827H-00_ML.indd 1 2019-04-09 오후 4:36:44
ENGLISH-02
Contents
03
Safety information
08
Installation
Accessories / Installation note
10
Charging
Automatic charging / Recharging / Low
battery (Lo)
12
Using POWERbot
Turning the power on/off / Selecting
cleaning modes/ Using special cleaning
functions / About the boundary markers
16
Using the remote controller
18
Name of each part
Top / Bottom / Display panel
19
Setting time/schedule
Setting the time / Setting the schedule
20
Cleaning and maintaining
Cleaning the dustbin / Cleaning the sensors and
the camera / Cleaning the brush and Auto shutter
tool / Cleaning the Driving wheel
22
SmartThings App
26
Notes and cautions
Charging / Using / Cleaning and maintenance /
About the battery / About the IrDA sensor
28
Information codes
29
Troubleshooting
33
Open Source Announcement
34
Specications
1_VR7200_EN_DJ68-00827H-00_ML.indd 2 2019-04-09 오후 4:36:45
ENGLISH-03
Safety information
SAFETY INFORMATION
WARNING
Before operating the appliance, please read this manual thoroughly and
retain it for your reference.
WARNING
Because these following operating instructions cover various models, the
characteristics of your vacuum cleaner may differ slightly from those
described in this manual.
CAUTION/WARNING SYMBOLS USED
WARNING
Indicates that a danger of death or serious injury exists.
CAUTION
Indicates that a risk of personal injury or material damage exists.
OTHER SYMBOLS USED
NOTE
Indicates that the following text contains additional important
information.
1_VR7200_EN_DJ68-00827H-00_ML.indd 3 2019-04-09 오후 4:36:45
ENGLISH-04
Safety information
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should be observed, including
the following:
READ ALL INSTRUCTIONS BEFORE USING YOUR POWERbot.
Unplug from outlet when not in use and before conducting maintenance.
WARNING: to reduce the risk of re, electric shock, or injury:
GENERAL
Use only as described in this manual.
Do not operate POWERbot or the battery charger / docking station if it has
been damaged in any way.
If the vacuum cleaner is not working as it should, has been dropped, damaged,
left outdoors, or dropped in water, return it to a customer care center.
Do not handle the battery charger / docking station or POWERbot with wet
hands.
Use only on dry, indoor surfaces.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Cleaning and user
maintenance shall not be made by children without supervision.
If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualied person in order to avoid a hazard.
Battery charger / Docking station
Do not modify the polarized plug to t a non-polarized outlet or extension
cord.
Do not use outdoors or on wet surfaces.
Unplug the battery charger / docking station from the outlet when not in use
and before servicing.
Use only the battery charger / docking station supplied by the manufacturer to
recharge.
Do not use with a damaged cord or plug or a loose power outlet.
Do not pull or carry by the cord, use the cord as a handle, close the door on the
cord, or pull the cord around sharp edges or corners. Keep the cord away from
heated surfaces.
Do not use extension cords or outlets with inadequate current carrying
capacity.
1_VR7200_EN_DJ68-00827H-00_ML.indd 4 2019-04-09 오후 4:36:45
ENGLISH-05
Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
Do not mutilate or incinerate batteries as they will explode at high
temperatures.
Do not attempt to open the battery charger / docking station. Repairs should
only be carried out by a qualied customer care center.
Do not expose the battery charger / docking station to high temperatures or
allow moisture or humidity of any kind to come into contact with the battery
charger / docking station.
Do not charge the non-rechargeable batteries the battery charger / docking
station.
POWERbot
Do not pick up hard or sharp objects such as glass, nails, screws, coins, and etc.
Do not use without a lter in place. When servicing the unit, never put ngers
or other objects into the fan chamber in case the unit accidentally turns on.
Do not put any objects into openings. Do not use with any openings blocked;
keep openings free of dust, lint, hair, and anything that may reduce air ow.
Do not pick up toxic materials (chlorine bleach, ammonia, drain cleaner, etc.).
Do not pick up anything that is burning or smoke, such as cigarettes, matches,
or hot ashes.
Do not use to pick up ammable or combustible liquids such as gasoline, nor
use on areas where they may be present.
Locations with candles or desk lamps on the oor.
Locations with unattended res (re or embers).
Locations with distilled alcohol, thinner, ashtrays with burning cigarettes, etc.
Do not use POWERbot in an enclosed space lled with vapours given off by oil
based paint, paint thinner, moth proong substances, ammable dust, or other
explosive or toxic vapours.
Leaks from battery cells can occur under extreme usage or temperature
conditions. If the liquid gets on skin, wash quickly with water. If the liquid gets
into the eyes, ush them immediately with clean water for a minimum of 10
minutes. Seek medical attention.
1_VR7200_EN_DJ68-00827H-00_ML.indd 5 2019-04-09 오후 4:36:45
ENGLISH-06
WARNING
Power related
f Please prevent any risk of electric shock
or re.
Do not damage the power cord.
Do not pull the power cord too hard or
touch the power plug with wet hands.
Do not use a power source other than 100-
240V~ and also do not use a multi outlet
to supply power to number of devices
at the same time. (Do not leave the cord
carelessly on the oor.)
Do not use a damaged power plug, power
cord or loose power outlet.
f Clean dust or any foreign matters on the
pin and contact part of the power plug.
There is a risk of electric shock or
malfunction.
WARNING
Before use
f Do not use POWERbot near a heater or
combustible materials.
Do not use POWERbot near re or ame
such as a movable heater, a candlelight,
a desk lamp, a replace etc. or in a place
where combustible materials such as
gasoline, alcohol, thinner etc. exist.
f Make sure there are no dangerous
objects around the POWERbot’s cleaning
area to prevent collision and unplug any
electric heaters or fans.
f The POWERbot is intended for household
use therefore do not use it in an attic,
basement, storage, industrial building,
out of indoor space, places with moisture
(such as bathroom, laundry), on the table
or shelves.
The POWERbot can be damaged or
malfunction.
f Be sure POWERbot does not pass through
or touch any kind of liquids.
The POWERbot can be severely damaged
and it may contaminate other areas if the
wheels pass through liquid.
f Attach the boundary markers on a place
where the POWERbot may fall such as
a stair or banister to prevent product
damage and injury.
Please keep the cliff sensor clean all the
time for safety.
f Do not spill any liquids on the docking
station.
There is a risk of re or electric shock.
f Do not use the docking station for
anything other than its intended purpose.
There is a risk of re or severe damage to
the docking station.
f Always keep the cliff sensor clean for
your safety.
WARNING
In use
f If any abnormal sounds, smells or smoke
come from POWERbot, immediately shut
off the emergency switch at the bottom of
POWERbot and contact a service center.
WARNING
Cleaning and
maintenance
f When power cord is damaged, contact
a service center to get it replaced by a
certied repairman.
There is a risk of re or electric shock.
f Please check with a Samsung Electronics
service center when exchanging batteries.
Using batteries from other products can
cause malfunction.
CAUTION
Before use
f Insert the dustbin before using
POWERbot.
f Be careful with the followings for proper
automatic recharging.
Always turn on the power of the docking
station.
Install the docking station where
POWERbot can easily nd.
Do not leave any object in front of the
docking station.
Safety information
1_VR7200_EN_DJ68-00827H-00_ML.indd 6 2019-04-09 오후 4:36:45
ENGLISH-07
f When installing the docking station, do
not leave the cord carelessly on the oor
since POWERbot may get tangled by it.
f Do not use POWERbot on black colored
oors.
The POWERbot may not be able to operate
normally.
f Do not place any objects within 0.5m
to both sides and 1m to the front of the
docking station.
f Make sure the docking station's charging
contact is not damaged or have any
foreign matters on it.
f Do not install the docking station in an
area with a dark oor.
If the oor around the docking station is
dark, recharging is hindered.
f Move any obstacles that may disturb
POWERbot's movement (such as
children's indoor swing or slides) before
cleaning.
f Do not use the POWERbot in a place
which is narrower than the turning
radius (0.5 m or less) of the POWERbot.
f To clean all areas of your house, open all
rooms and attach the boundary markers
on the places where the POWERbot
may get damaged such as a front door,
veranda, bathroom, and stairs for safety.
f For the very low areas where the
POWERbot may get stuck, attach the
boundary markers to prevent the
POWERbot from getting in.
f If a brush or brush cover is not
assembled correctly, scratches may occur
on the oor, or product malfunction may
occur.
f Before operating the POWERbot, remove
the objects which could break such as
a frame, mirror, and porcelain items
so that the POWERbot works without
interruption.
CAUTION
In use
f Using POWERbot on thick carpet may
damage both POWERbot and the carpet.
The POWERbot cannot pass over carpet
that is thicker than 1 cm.
f Do not use POWERbot on tables or other
high surfaces.
There is a risk of damage if it falls.
f The POWERbot may bump into chair,
desk legs therefore move them away for
faster and efcient cleaning.
f When POWERbot is operating, do not lift
it up or carry it to another area.
f Do not hold by driving wheels of
POWERbot when carrying it to another
area.
f Do not put any objects on top of
POWERbot and camera since it may
cause malfunction.
f Remove any large papers or plastic bags
immediately when using POWERbot since
they may block the intake.
f Do not aim the red pointer directly at
people or animals.
f Do not lie down around the POWERBOT
that is running.
Your hair may be caught in the brush,
resulting in physical injury.
CAUTION
Cleaning and
maintenance
f Prevent any damage to POWERbot by
complying with the following
Do not clean POWERbot by spraying water
directly onto it or use benzene, thinner,
acetone or alcohol to clean it.
f Do not disassemble or repair POWERbot.
This should only be done by a certied
repairman.
f Always keep the obstacle sensor, cliff
sensor and camera clean.
If foreign matter accumulates, sensors may
malfunction.
1_VR7200_EN_DJ68-00827H-00_ML.indd 7 2019-04-09 오후 4:36:46
ENGLISH-08
DC-IN
1
Connect the
battery charger
jack to the
docking station
2
Connect the
power cord
to the battery
charger
When using the battery
charger, the side with the
sticker attached must face
down.
3
Connect the
power plug to
the outlet
Installation
The docking station must be plugged in and turned on at all times.
About 1m
About
0.5m
About
0.5m
Install the docking station in
a place without obstacles and
danger of falling.
1_VR7200_EN_DJ68-00827H-00_ML.indd 8 2019-04-09 오후 4:36:47
ENGLISH-09
Accessories
Remote controller Batteries
(AAA type)
User manual Spare lter Docking station
Power cord Battery charger Boundary markers Soft Action Brush /
Brush cover
Combo Brush /
Brush cover
Accessories may differ depending on the models.
Refer to page 15 for the installation of boundary markers.
Battery Spec : Lithium-ion, 21.6V, 3600mAh, 12cell
For VR20R726*** models, combo brush and soft action brush are provided.
Installation note
Note
f Install the docking station in a place where the oor and wall are level.
f It is best to install the docking station along the grain of wooden oors.
f If the emergency switch is off, the POWERbot will not charge even if it is docked on the
docking station.
f Always turn on the power of the docking station.
If power is not supplied to the docking station, the POWERbot cannot nd it and cannot
automatically recharge.
If the POWERbot is left detached from the docking station, the battery will drain naturally.
f If the POWERbot is in sleep mode, power will not come on even if the emergency switch
is turned off and then on. Press and hold the [Start/Stop] button on the POWERbot to turn
the sleep mode off.
1_VR7200_EN_DJ68-00827H-00_ML.indd 9 2019-04-09 오후 4:36:49
ENGLISH-10
Charging
1
Turn on the
emergency switch
on the bottom
You must turn on the
emergency switch to turn on
the POWERbot.
2
Manually charge
the POWERbot by
placing it on the
docking station
Make sure the charging
pins on the POWERbot
and the docking station
are aligned.
3
Check the
charging status
" " will turn on according
to charging progress and "FULL"
will turn on when charging is
complete.
WARNING
Rated input voltage of this product is 100-240V~.
Charge the POWERbot fully before using for the rst time. (Refer to the page 34 for the charging
time.)
1_VR7200_EN_DJ68-00827H-00_ML.indd 10 2019-04-09 오후 4:36:51
ENGLISH-11
You can command the POWERbot to
recharge at the docking station while it is
in cleaning.
Recharging
Manually charge the POWERbot by placing
it on the docking station.
Low battery (Lo)
Steps to take if recharging not occuring:
Check the installation status of the
docking station when:
fthe docking station is located in a place where
the POWERbot cannot easily access it.
fthe distance between the docking station and
POWERbot is over 5m.
It may take a long time for POWERbot to
return to the docking station for recharging
Manually charge the POWERbot when:
fthe docking station is located in a corner
fthe battery is fully exhausted
fthe POWERbot is immobilized by an obstacle
(furniture etc.)
fthe POWERbot can't climb a threshold near
the docking station (The maximum height of
a threshold the POWERbot can climb is about
1.5 cm.)
fwhen the battery indicator blinks and "Lo" is
displayed
fwhen the POWERbot is set to the Spot clean or
Manual clean mode
When the battery indicator blinks during
cleaning, the POWERbot will return
to the docking station to charge itself
automatically.
Automatic charging
1_VR7200_EN_DJ68-00827H-00_ML.indd 11 2019-04-09 오후 4:36:52
ENGLISH-12
Using POWERbot
You must turn on the emergency switch on the bottom of the unit before using POWERbot.
Turning the power on/off
Press the button for more than 3seconds
Starting Auto clean mode
The POWERbot moves and automatically cleans the
set areas only once.
Stop cleaning: Press and release the button
Recharging
You can command POWERbot to recharge at the
docking station automatically while it is cleaning
by pressing this button.
Using Spot clean mode
The POWERbot cleans a localized area intensely.
WARNING
When POWERbot is not used for about 30 minutes, it automatically returns to the
docking station to recharge.
1_VR7200_EN_DJ68-00827H-00_ML.indd 12 2019-04-09 오후 4:36:53
ENGLISH-13
Selecting cleaning modes
Cleaning mode How to select Displayed icon
Auto clean
Spot clean
Repeat clean
Press the [
] on the remote controller rst
and then press the [Start/Stop
].
Manual clean
Manual clean mode can be selected by the
direction control buttons of the remote
controller.
If POWERbot fails to return to the docking station, it will turn to energy-saving mode and display
panel will be turned off.
To exit the energy-saving mode, press the [Start/Stop
] or [Power ] button of main body or
remote controller.
If cleaning in Auto clean mode is completed within 15 minutes, POWERbot cleans 1 more time.
POWERbot increases suction power in Spot clean and Point cleaning mode.
1_VR7200_EN_DJ68-00827H-00_ML.indd 13 2019-04-09 오후 4:36:55
ENGLISH-14
Cleaning method for each modes
About 1.5 m
About 1.5 m
Auto clean
Automatically cleans the
set areas only once.
Spot clean
Cleans a localized area
intensely. It can be used
to clean bread or cookie
crumbs.
Manual clean
You can move
POWERbot with the
remote controller to
clean the desired spot.
Repeat clean
Cleans repeatedly until
the battery is depleted.
Using special cleaning functions
Cleaning function Operation Displayed icon
Intelligent power
control
When the POWERbot detects a carpet in
normal mode, it will automatically operate with
stronger suction power.
Edge Clean Master
When the POWERbot detects an edge or corner
in Auto clean or Spot clean, the auto shutter tool
operates and approaches the edge or corner
section to clean.
fStraight edge (One time cleaning)
fCorner (Two times cleaning)
Using POWERbot
1_VR7200_EN_DJ68-00827H-00_ML.indd 14 2019-04-09 오후 4:36:57
ENGLISH-15
About the boundary markers
To prevent the POWERbot from entering the following areas,
attach the boundary markers on the oor in the shape at an
interval of about 15cm.
About 15cm
Boundary
markers
About 5cm
About 15cm
Boundary
markers
where a raised spot is below 5cm where there is a slide, swing, replace or any
ammable substance or moisture.
Above 1.5cm
Boundary
markers
Boundary
markers
where a threshold is above 1.5cm where there is risk of falling such as stairs,
porches or guardrails.
1_VR7200_EN_DJ68-00827H-00_ML.indd 15 2019-04-09 오후 4:36:58
ENGLISH-16
Using the remote controller
1 Operation & Recharging
Power
Turn POWERbot's power on/off
Recharging
Select to recharge POWERbot at the
docking station automatically
Start/Stop
Select to start or stop cleaning
process
2 Cleaning modes
Auto clean
Select to clean all set areas only
once and then automatically return
to the docking station.
Spot clean
Select to clean a localized area
intensely
Repeat clean
Select to clean repeatedly until the
battery becomes very low with
indicator blinking
3 Suction power
Turbo mode
Select to clean with the strongest
suction power
Normal mode
Select to clean with moderate
suction power
Quiet mode
Select to clean with lower
operation noise
4 Additional function
Sound
Select to set the voice guide
fVoice Guide (English) Sound
Effects Mute
fPress and hold the sound button
to change and set a language.
Remote
control
Select to turn Wi-Fi function on or
off
1
3
5
2
Refer to
page 19
4
4
6
1, 2
1_VR7200_EN_DJ68-00827H-00_ML.indd 16 2019-04-09 오후 4:37:01
ENGLISH-17
5 Manual clean mode & Direction control
Move forward
Select to move forward
Turn left
Select to turn left
Turn right
Select to turn right
Moving backward is not available.
6 Point cleaning
You can use the remote controller to point and clean the desired spot while the
POWERbot is in cleaning process.
Point the red light on the oor within 0.5m around POWERbot's location.
Press and hold the Point cleaning button to move the red light to the desired spot. The POWERbot
will follow the light while cleaning.
fIf you point the red light directly at the body of the POWERbot, abnormal operation may occur.
Therefore, point the red light within 0.5 m around the POWERbot.
0.5 m
Operating distance of the remote controller
Height of the
remote controller
Operating distance
Height of the
remote controller
0.5m 1m 1.5 m
Operating
distance
About 1.5m About 2m About 3m
Inserting batteries
Open the battery cover by lifting it
up while pressing the locking tab and
insert the batteries as shown in the
illustration. Then, close the cover until
it clicks into place.
1_VR7200_EN_DJ68-00827H-00_ML.indd 17 2019-04-09 오후 4:37:03
ENGLISH-18
Name of each part
1
4
2
2
6
5
3
7
8
Top
1. Display panel
2. Remote control signal receiver
3. Obstacle sensor
4. Dustbin
5. Camera
6. Dustbin button
7. Bumper sensor
8. Auto shutter tool
5
5
4
2
3
4
11
8
4
9
10
7
1
6
Bottom
1. Charge pins
2. Brush
3. Brush cover
4. Cliff sensor
5. Roller
6. * Optical sensor
7. Battery cover
8. Brush cover button
9. Driving wheel
10. Emergency switch
11. Auto shutter tool
* Optical sensor: Measures moving distance by the light pattern which is reected from oors and
comes into the optical receiver.
5
16
15
3
4
7
1
6
2
14
12 138 11109
Display panel
1. Mute
2. Information Indicator
3. Remote control Off/On indicator
4. Wi-Fi
5. Battery indicator
6. One-time/Daily schedule
7. Number display
8. Spot clean mode
9. Manual clean mode
10. Repeat clean mode
11. Quiet mode
12. Normal mode
13. Turbo mode
14. Spot cleaning button
15. Start/Stop button
16. Recharging button
1_VR7200_EN_DJ68-00827H-00_ML.indd 18 2019-04-09 오후 4:37:04
ENGLISH-19
Setting time/schedule
Setting the time
You must set the current time before using the One-time/daily schedule.
Start setting Select "Hour" Select "Minute"
Select "AM/PM"Setting complete
Skip to previous,
next setting
Setting the schedule
Setting/cancelling the schedule can only be done while POWERbot is docked on the docking station.
Start setting Select "One-time" or
"Daily" schedule
Select "Hour"
Select "Minute"Select "AM/PM"Setting complete
Skip to previous, next setting
Cancelling during setup
fSetting will be canceled automatically when there's no
input for 7seconds.
Cancelling One-time/Daily schedule
When both One-time/
Daily schedule is set
or or
Press for 3 sec. Select the schedule Cancel complete
When either one of
One-time or Daily
schedule is set
Press for 3 sec.
fYou can set the multi-time schedule and the anti-disturbance time with the SmartThings App.
fWhen the anti-disturbance time is set at the SmartThings App, you cannot set the schedule at the
body of the POWERbot within the set anti-disturbance time.
If you want to set the schedule within the set anti-disturbance time, cancel the set anti-
disturbance time at the SmartThings App rst.
1_VR7200_EN_DJ68-00827H-00_ML.indd 19 2019-04-09 오후 4:37:09
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109

Samsung SR20R7250WD Руководство пользователя

Тип
Руководство пользователя

Задайте вопрос, и я найду ответ в документе

Поиск информации в документе стал проще с помощью ИИ