IWC ingenieur dual time titanum reference 3264 Operating Instructions Manual

FLIEGERUHR WORLDTIMER

— 3 —

— 5 —

OPERATING INSTRUCTIONS

English

— 19 —

使用说明

简体中文

— 33 —

使用說明

繁體中文

— 47 —

取扱説明書

日本語

— 61 —

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

Русский

INGENIEUR DUAL TIME TITANIUM

— 5 —

INGENIEUR DUAL TIME TITANIUM

Welcome to the small circle of individuals

who, if we are to be absolutely precise, demand slightly more of

a watch than absolute precision. Appreciation of a watch is more

than mere appreciation of the correct time. It is enthusiasm for an

ingenious idea. For the interplay bet ween precision and imagin-

ation. Between time and timelessness. Between boundaries and

infinity. Between laws to which the entire world is subject, and

taste, which cannot be dictated to anyone. That is why, since

1868, we have been devoting rather more of our time to watches

that must not only run with absolute precision but which also, with

every passing second, exert a fascination with the great achieve-

ments of master craftsmanship: a fascination with new inventions

of a technical, material or formal nature, even if they are concealed

in minute details that are perhaps not even visible. You are now the

owner of a beautiful new example of this IWC tradition. We would

like to congratulate you on your choice and send you our best

wishes for the time you will spend with your watch, which perhaps

cannot be described with any greater accuracy than it is here.

IWC MANAGEMENT

— 6 —

INGENIEUR DUAL TIME TITANIUM

THE TECHNICAL REFINEMENTS OF THE

INGENIEUR DUAL TIME TITANIUM

Your IWC watch shows you the time in hours, minutes and sec-

onds, together with the date. A 24-hour hand shows you an add-

itional time zone of your choice. As you pass through a time zone,

you can adjust the hour hand of your watch in steps without stop-

ping the mechanical movement (Time Zone Corrector = TZC). The

date change is also taken into account in this adjustment. The

mechanical movement with automatic winding has a power reserve

of approximately 42 hours when fully wound. Your Ingenieur Dual

Time Titanium is protected by a sapphire glass of hardness grade

9 on Mohs’ scale. Your watch is water-resistant 12bar. To ensure

that this extraordinary watch continues to perform faultlessly in

the future, it is essential to observe a few important operating

instructions.

— 7 —

INGENIEUR DUAL TIME TITANIUM

1 Hour hand

2 Minute hand

3 Seconds hand

Date display 4

24-hour hand 5

Screw-in crown 6

2

4

6

1

3

5

— 8 —

INGENIEUR DUAL TIME TITANIUM

FUNCTIONS OF THE CROWN

X — Normal position (screwed in)

0 — Winding position

1 — Hour and date setting

2 — Time setting

NORMAL POSITION

This watch has a screw-in crown. Screwing the crown in to its

normal position (X) prevents the inadvertent adjustment of the

time, the 24-hour hand or the date, and also acts as a double seal

to prevent water from seeping into the case. To release the crown,

unscrew it by turning it to the left, where it automatically assumes

position 0, the winding position. By depressing the crown in pos-

ition X and turning it to the right at the same time, it is screwed

down firmly again and secured.

X 0 1 2

— 9 —

INGENIEUR DUAL TIME TITANIUM

WINDING POSITION

With the crown in the winding position (0), you can also wind the

automatic movement by hand. A few revolutions of the crown are

enough to start the movement. However, it is better to wind the

watch by turning the crown through approximately 20 revolutions

as this will ensure maximum accuracy.

HOUR AND DATE SETTING

Release the screw-in crown and pull it out to position 1. By turn-

ing the crown to the left or the right, you can now adjust the

hour hand forwards or backwards in one-hour steps. The move-

ment is not stopped by this operation, and the set time in minutes

and seconds is unaffected by this adjustment. If the hour hand is

adjusted past midnight, the date will move forwards to the next

day or backwards to the previous day. This function is used for

setting the date or is required when crossing from one time zone

to another.

— 10 —

INGENIEUR DUAL TIME TITANIUM

If a month has fewer than 31 days, you will need to set the date

manually to the first day of the following month. By turning the

crown to the left, you can now move the hour hand forwards

24 hours in one-hour steps. As the hour hand passes midnight,

the date is advanced to the next day. You have now corrected

the time display by one day while the movement continues to run.

TIME SETTING

Pull out the crown to position 2. This will stop the movement. To

set the time accurately to the second, it is best to stop the move-

ment as the seconds hand passes 60. The minute hand and the

24-hour hand can now be set (the hour hand is set separately

with the crown in position 1). Now move the minute hand a few

minute strokes beyond the time to be set. Then position the min-

ute hand by moving it gently backwards until it is exactly above

the correct minute stroke. This ensures that the minute hand

begins to move immediately when you restart the movement. To

start the movement, push in the crown to position 0.

Important: Although the watch is water-resistant in positions 0,

1 and 2, the crown should always be screwed in again for normal

use (position X).

— 11 —

INGENIEUR DUAL TIME TITANIUM

SETTING YOUR WATCH CORRECTLY

To set your watch correctly, proceed as follows:

– Release the crown by turning it to the left.

– Wind the movement (approximately 20 revolutions of the

crown).

– Pull out the crown to position 2. This will stop the movement.

To set the time accurately to the second, it is best to stop the

movement as the seconds hand passes 60.

– Turn the minute hand and the 24-hour hand forwards until they

indicate the desired time. The 24-hour hand should be set to

show the correct time of the chosen time zone. Now move the

minute hand a few minute strokes beyond the time to be set.

Then position the minute hand by moving it gently backwards

until it is exactly above the correct minute stroke. This ensures

that the minute hand begins to move immediately when you

restart the movement.

– Push the crown back to position 0 to start the movement and,

in doing so, the seconds hand.

– Pull out the crown to position 1.

– Turn the hour hand forwards or backwards in one-hour steps

until the date display changes to today’s date.

– If you turn the hour hand forwards: The hand will now be

positioned between 12 midnight and 1 a.m. Now turn the hour

— 12 —

INGENIEUR DUAL TIME TITANIUM

hand forwards to the correct time. If you are setting the watch

in the afternoon, you must turn the hand past 12 (noon) again.

– If you turn the hour hand backwards: The hand will now be

positioned between 11 p.m. and 12 midnight. Now turn the

hour hand backwards to the correct time. If you are setting the

watch in the morning, you must turn the hand past 12 (noon)

again.

– Now push the crown to position X and secure it by simultan-

eously turning it to the right.

TZC (TIME ZONE CORRECTOR)

Local times throughout the world are, for the most part, divided

into time zones with a time difference of exactly one hour between

each zone. The function of the TZC (Time Zone Corrector) permits

rapid adjustment of the time display in one-hour steps.

— 13 —

INGENIEUR DUAL TIME TITANIUM

READING THE 24-HOUR HAND

The 24-hour hand shows the second time zone of your choice on

the 24-hour scale, which runs around the edge of the dial.

INTERNATIONAL DATE LINE

The International Date Line largely coincides with the 180th

degree of longitude on the surface of the earth. Yesterday’s date

applies if this line is crossed in an easterly direction, and you

move into the next day if it is crossed in a westerly direction. The

same date applies throughout the entire world only once a day,

namely at midnight on the International Date Line.

CHANGING TIME ZONES

When crossing into another time zone, you can set the time dis-

play to the appropriate local time. The date display is automat-

ically readjusted by adjusting the hour hand to the actual time

zone. The 24-hour hand is unaffected by this operation.

— 14 —

INGENIEUR DUAL TIME TITANIUM

READING THE TIME IN THE DARK

Both the dial and the hour and minute hands of your watch have

luminescent elements that allow you to read the time effortlessly,

even in total darkness.

— 15 —

INGENIEUR DUAL TIME TITANIUM

WATER-RESISTANCE

The water-resistance of IWC watches is stated in bar and not

in metres. Metres, which are often used elsewhere in the watch

industry to indicate water-resistance, cannot be equated with

dive depth because of the test procedures that are frequently

used. Water-resistance shown in metres provides no indication

as to actual use of the watch in the presence of moisture and

wetness, and in or under water. Recommendations for use in

connection with the water-resistance of your watch can be found

on the Internet at www.iwc.com/water-resistance. Your author-

ized IWC Official Agent will also be pleased to provide you with

information.

To ensure that your watch continues to function perfectly, you

should have it checked by an IWC service centre at least once a

year. Your watch should also be tested after exposure to unusually

harsh conditions. If the tests are not carried out as stipulated, or if

the watch is opened by unauthorized persons, IWC will accept no

warranty or liability claims.

Recommendation: Your authorized IWC Official Agent must

carry out a water-resistance test whenever your IWC watch is

opened and serviced.

— 16 —

INGENIEUR DUAL TIME TITANIUM

SERVICING YOUR

INGENIEUR DUAL TIME TITANIUM

Although the parts in this watch are all manufactured from top-

quality materials, a number of components are subject to natural

wear and tear. It is particularly important to ensure that the points

at which wear occurs are always well lubricated and that oil con-

taminated by metal abrasion is regularly removed. For this reason,

we recommend that you have your watch serviced approximate-

ly every five years. Please contact an authorized IWC Official

Agent or send your watch directly to the IWC Customer Service

Department in Schaffhausen.

Effective from December 2012.

Technical speciﬁcations subject to change.

— 19 —

工程师双时区钛金属腕表

  欢迎您加入IWC万国表爱表人士的小

圈子。确切来说，我们对腕表在性能精准之上有更上一层楼的

追求。体验腕表带给您的乐趣，绝不仅限于其分秒不差的精准性

能。方寸之间，您可欣赏其独具匠心的巧思创意、精准性能与想象

力的相辅相成，可体会时间与永恒、疆界与无穷之间的交相辉映，

以及千古亘久的自然法则与自成一格之品位的完美融合。因此，自

1868年创立至今，IWC万国表倾情致力于钟表制作，不惜时间制作

出不仅运行绝对精准的腕表，而且，随着每一秒的流逝，每只腕表

都释放出顶级钟表工艺辉煌成就的魅力：在技术、材质和设计风格

上锐意创新——尽管其隐于细节之处甚或不易察觉，引人入胜。您

所购买的精美腕表正是此IWC万国表优良传统的典范。对于您明智

的选择，请容我们献上由衷的祝贺，并诚挚地祝福您与这款腕表共

度美好时光，记录生活每一刻。它的优异性能将在下文中有详细的

说明。

IWC万国表管理部

— 20 —

工程师双时区钛金属腕表

工程师双时区钛金属腕表的技术特性

您的这款IWC万国表具有时、分、秒和日期显示功能。旋转式24

小时显示外圈还向您提供选定的第二时区的当前时间。跨越时区

时，您无须中止机械机芯即可对腕表时针进行跳时式调校（TZC=

时区调校器），日期显示也会随之调整。自动上链机械机芯，上

满链时可提供约42小时的动力储备。您的工程师双时区钛金属腕

表采用硬度等级为摩氏9级的蓝宝石玻璃表镜，为日常使用提供完

美呵护。防水深度为12巴。为确保本腕表在未来能够始终保持超

卓性能，请谨遵若干重要操作说明。

Страница загружается ...

IWC ingenieur dual time titanum reference 3264 Operating Instructions Manual

IWC ingenieur dual time titanum reference 3264 Operating Instructions Manual

на других языках

Похожие модели бренда

Модели других брендов