iON Camocam Wi-Fi Инструкция по началу работы



Quick Start Guide

EN-1

Thank you for purchasing the iON CAMOCAM HD sports video camera. This QSG contains

the common functions and features of CAMOCAM. For additional features and functions of

CAMOCAM, please refer to the back of the manual.

The iON CAMOCAM can be mounted with the Bike & Helmet Kit or the Board Kit for the

ultimate adventure HD recording experience (sold separately).

Quick Start Guide

EN-2

Getting to know your camera

Common features:

 iON CAMOCAM is a Professional, High Quality Digital Video Recorder that records Full

HD videos with the push of an slide switch

 It has the latest 14 Mega Pixel Sensor for you to take great digital photographs

 A 180 degree high quality lens provides a super wide angle field of view

 Your camera supports a MicroSD card up to 32GB, allowing you to record videos in

1080p with 30 frames per second for approximately 4 Hours.

 Equipped with the microphone jack for connection with an external microphone.*

 Waterproof Housing enables you to operate the camera up to 10 meters under water.

 iON CAMOCAM is approximately 4.51 ounces or 128g.

* When an external microphone (not included) is connected, audio cannot be recorded

through the built-in microphone. Please note when external mic is connected the

camera is no longer waterproof.

1. Package Contents of CAMOCAM

Carefully unpack the package and ensure that you have the following items:

EN-3

1 Secure Strap Secures the camera to the mount to provide additional security.

2 USB Cable

1. Connect the camera to a computer for data transfer or

camera setup.

2. Charge your camera.

3

Dual USB Car

Adapter

Plug into the car cigarette lighter socket and charge your

camera simultaneously by using the included USB cable.

4

Fish & Hunting

Mount

Please refer to the Fish & Hunting pictorial guide for mounting

instructions.

5 CamLOCK

Mount or remove the camera quickly from the CamLOCK

socket.

6 Warranty Card

Please retain for manufacturers warranty period which is

limited to 1 year.

7 Quick User Guide Provide quick information for easy camera operation.

8 Mi-media Card

Provides guidance on how to sign up for your free iON cloud

storage

2. Functional Parts of CAMOCAM

1 Power

1. Turns the camera on or off

2. Takes a single photograph

2 LED Indicator Shows the camera status

3 Recording Switch Slide to start or stop video recording

EN-4

4 Lens High quality lens

5

MicroSD Card

Slot

MicroSD card storage location.

6 Mic Jack

To enable you to connect to an external microphone (not

included). Please note when an external microphone is being

used the camera is no longer waterproof.

7 Mini HDMI Jack

To enable you to connect the camera to an HDTV with an HDMI

cable (not included)

8

Video Resolution

Switch

Select video resolution: FHD (Full HD) or HD.

9 USB Port

1. Connect to your computer for data transfer or camera setup

2. Charge your camera

10 Reset Button Reset the camera

11 PODZ Socket

Connect any PODZ to the camera to perform additional

functions. Also acts are waterproof barrier.

3. Using Your Camera

3.1 Charging up Your Camera

Charge your camera with either the USB cable or Dual USB car adapter. The red LED will

light up to indicate the camera is charging and it will turn off once the camera has been fully

charged. It takes approximately 3 hours to fully charge the camera.

3.2 Inserting a Memory Card

Insert a MicroSD card up to 32GB (not included) before using your camera. Ensure that the

camera power is turned OFF before inserting the card into the slot.

Notes:

1. There is only one correct direction to insert the MicroSD card into the slot. Do not force

the card into the card slot as it may damage both the camera and the MicroSD card.

2. A new MicroSD card should be formatted before using. For more information, please

see section 7.2.

EN-5

3. We recommend a class 10 SDHC card.

3.3 Setting up Date and Time

Connect your camera to a computer and run the iON software from the MicroSD card folder.

You can set the date and time on the camera via the settings page. Please see section 4.1 to

open iON software

3.4 Installing the PODZ

1. Attach the PODZ to the back of the camera and rotate

clockwise until the two dots are aligned.

2. Slide the latch on the PODZ down to lock it.

WARNING: The latch must be locked in place to

ensure the

waterproof seal is activated – failure to do so may cause water

leakage.

3.5 Recording Videos

Before starting to record, select the video resolution using the

Video Resolution Switch.

There are two methods for starting the video recording function. When the camera starts

recording, there will be a short vibration indicating recording has started. The LED indicator

illuminates RED throughout recording.

1. Whether the camera power is ON or OFF, simply slide the Recording Slide Switch

from STOP to REC to start recording.

2. When your camera is OFF and the Recording Slide Switch

is at REC

location, press and hold the Power

button to turn the camera ON and it will start

recording.

To stop Recording, move the Recording Slide Switch

from REC to STOP .The

camera will vibrate and the LED indicator will illuminate GREEN to indicate the recording has

stopped. The camera will then enter Standby mode.

An additional option is to hold the Power

button to stop the recording and turn the

camera off. The camera will vibrate for two seconds and the Red LED light will turn off.

EN-6

Notes:

1. An additional 432x240 (w/ 1080p/720p) or 320x240 (w/ 960p) video file will be created

simultaneously with the recording of an HD/FHD video file. The smaller video file size

allows for more efficient uploading of content to social media platforms and email.

2. Changing video resolution is disabled during video recording.

3. There will be around 1-2 seconds delay before the camera starts recording.

4. The various video resolution options for HD and FHD can be changed under the

“Settings” section in the iON software. (see section 5)

3.6 Taking Photos

1. Turn on the camera by pressing the Power button.

2. After the camera power has been turned on, press the Power

button very briefly to

take a photo. A short vibration and a flash of the green LED indicates that the action

was successful.

Notes:

1. The Still Photo function is disabled during video recording.

2. Change photo resolutions and shooting mode (Single Shot, Burst Mode and Time

Lapse) through the “Settings” section on the iON software.

4. Mounting Your Camera

4.1 Secure Strap

1. Loop one end of the secure strap through

the strap hole of the camera. You may use a

pin to help thread it through the hole.

2. Attach the other half to the mount.

3. Clip both ends together when camera is mounted.

4.2 CamLOCK

iON’s versatile CamLOCK Mount System allows you to

attach the camera to any type of helmet (bike, motorcycle,

ski, skydive etc.), pole, board (surf, skate, ski etc) and

EN-7

handlebar (bike and motorcycle).

Please refer to the specific mounting guides for instructions on how to install your mounts

with your camera for particular activities.

1. Fit the screw of the CamLOCK to the tripod socket of the camera.

2. Screw the CamLOCK until it is tight on the camera.

5. iON Software Application

The iON Software Application for Windows or Mac lets you connect to a computer by USB to:

1. View, delete, and copy the files stored on the camera

2. Change the camera settings

3. Set the Date & Time

4. Link to the iON website and cloud service

5. Check the firmware update

5.1 Windows Software Application

The Windows iON.exe Software Application comes installed on the camera. To run the

application:

1. Insert a MicroSD card with at least 2MB free space into the camera.

2. Press the Power button to turn the camera on.

3. Connect your camera to the PC via the camera’s USB cable.

4. Open the MicroSD folder and you will find the file “iON.exe”.

5. Double click the file to open

5.2 Mac Software Application

1. Visit the iON website (www.ioncamera.com/ion/Firmware-Updates.html) to download the

latest Mac software application version.

2. Insert a MicroSD card with at least 2MB free space into the camera.

3. Press the Power button to turn the camera on.

4. Connect your camera to the Mac via the camera’s USB cable.

4. Use Finder to locate and open the camera as a new device usually called “No Name”. You

should see a folder “DCIM” and the file iON.exe when you open it.

6. Drag the downloaded file to the new device and put it with DCIM and iON.exe.

EN-8

7. Double click the newly loaded file to run the Mac Application. The application will not run if

it is not on the camera’s card.

Notes:

The camera can be connected to any plug & play Windows or Mac system and accessed as

a removable disk drive. Files can be viewed and copied without the use of the application.

6. Signing Up for Free iON Cloud Storage

You can sign up for your 8GB of free Cloud storage simply go to

www.ioncamera.com/ioncloud and follow the steps. The iON Cloud is a great way to store

and share your photos and video footage for free.

7. Connecting Your Camera

7.1 Connecting Your Camera to a PC

To open the iON software,

1. Insert a MicroSD card into your camera and make sure there is at least 2MB free space.

2. Press the Power button to turn the camera on.

3. Connect your camera to a PC via the USB cable included.

4. Open the MicroSD folder and you will find the file “ion.exe”.

5. Double click the file to open

Once you open the software you can:

1. Browse the files saved in the camera

2. Change the camera settings

3. Link to the iON website and cloud service

4. Check for the firmware updates

Notes

1. If you cannot find ion.exe in your MicroSD folder, unplug the cable from the PC, turn

the camera on and off once then reconnect to the PC.

EN-9

2. If you are a Mac user, visit the iON Website

(www.ioncamera.com/ion/Firmware-Updates.html

) to download the software in Mac

Version.

7.2 Connecting Your Camera to a TV/HDTV

You can connect your camera to a TV or HDTV via a Composite RGB (not included) or an

HDMI cable (not included). Once you are connected you can:

1. Take photos or videos by using your TV as a viewfinder

2. Playback any photo or video files saved in the camera

3. Delete any files saved in the camera

4. Format the MicroSD Card

8. CAMOCAM Package Content

In addition to the package contents of CAMOCAM (Refer to section

1), the CAMOCAM has a Wi-Fi PODZ included for performing the

Wi-Fi functionality.

Wi-Fi PODZ

1. Enables use of smart device with your camera.

2. Acts as waterproofing (see section 3.4)

8.1 Wi-Fi PODZ Functional Parts

In addition to the functional parts of CAMOCAM (Refer to items 1

to11 in section 2), CAMOCAM has additional functional parts on

the Wi-Fi PODZ.

12 Wi-Fi PODZ

Rotate to seal to ensure waterproof seal is

activated.

13 Wi-Fi LED indicator Shows the Wi-Fi status

14 Wi-Fi Power button Turns the Wi-Fi on or off

EN-10

15 PODZ Latch Locks the PODZ

WARNING: The latch must be locked in place to ensure the waterproof seal is activated –

failure to do so may cause water leakage.

8.2. Using the Wi-Fi PODZ

8.2.1 Installing and turning on the Wi-Fi PODZ

1. Remove your standard PODZ from the back of the camera

and place your Wi-Fi PODZ into the camera PODZ socket.

(follow steps 1 and 2 under section 3.4)

2. Press and hold the Power

button to turn on your

camera.

3. Press the Wi-Fi power button on the Wi-Fi PODZ to turn on

your Wi-Fi. The blue LED lights up to indicate the Wi-Fi is

warming up. It will take approximately 15-20 seconds for the Wi-Fi to warm up and

become connectable. The LED will flash when the Wi-Fi function is active or

connected.

4. Press the Wi-Fi power button to turn off the Wi-Fi anytime.

Note: Wi-Fi will drain your camera battery more rapidly when activated. Turn the Wi-Fi off if

you are not using it to change settings or upload content.

8.2.2 Connecting the Camera to a PC using Wi-Fi PODZ

1. Turn on your camera and Wi-Fi PODZ.

2. Go to the network settings of your PC and choose Wi-Fi settings. Search the network,

find and click “WIFIPODZ”.

3. Enter password “123456789” and to connect to your camera.

4. Open your Internet browser and input “192.168.1.2”. You will then be able to view the

files stored in your camera.

8.2.3 Connecting the Camera to Your Smart Device (Browser)

1. Turn on your camera and Wi-Fi PODZ.

EN-11

2. Go to the network setting of your mobile device and choose Wi-Fi settings. Search the

network, find and click “WIFIPODZ”.

3. Enter password “123456789” to connect to your camera.

4. Open your Internet browser and input “192.168.1.2” or “wifi.podz”. You can now view

the photos and videos stored in your camera.

8.2.4 Connecting the Camera to Your Smart Device (App)

1. Search "ioncamera" app in your devices app store.

2. Download and install the app to your smart device.

3. Turn on your Wi-Fi PODZ.

4. Go to the network settings of your device and choose Wi-Fi settings. Search the

network, find and click “WIFIPODZ”.

5. Enter password “123456789” to connect to your camera.

6. Open your app.

7. Please refer to the app page for detailed operating instructions.

9. Sealing Your Camera to prevent water damage

The Waterproof Housing (standard PODZ on iON CAMOCAM camera and Wi-Fi PODZ in

CAMOCAM ) allows you to operate the camera up to 10 meters or 30 feet under water. You

must seal the camera with the PODZ in order to protect the camera when using it in wet or

moist conditions.

Notes:

1. The rubber seal on the PODZ forms the waterproof barrier to protect the camera in wet

and underwater conditions. You must keep this seal clean as a single strain of hair or

grain of sand can cause leakage into the product.

2. After every use in salt water, you will need to rinse the outside of the product and the

seal with non-salt water and dry. Not doing this can cause corrosion in the product or

failure in the seal, in turn, damaging the product.

Warning:

Please ensure you install and lock the PODZ correctly before using

the camera to avoid water damage. Failure to properly seal your

EN-12

camera can result in leaks that damage or destroy your camera. Your

warranty does not cover water damage resulting from user error.

10. Troubleshooting

Problems Causes Solutions

1. LED flashes and the

camera turns off

2. The iON camera will not

turn on.

Battery is depleted Recharge the camera

Red LED flashes during

recording

Low battery Recharge the camera

Cannot take photos or

video (Green LED flashes)

Memory full

Replace with a memory card with

space available.

Cannot take photos or

video (Green and Red LED

flashes alternatively)

1. MicroSD card is not

inserted

2. MicroSD card has not

been formatted properly.

1. Insert a MicroSD card

2. Format the MicroSD card on a

PC

Cannot find removable disk

after connecting the camera

to the computer.

Connection failure.

1. Make sure all cable

connections are secured and

restart the computer if necessary.

2. Try a different USB port.

11. Specifications

Sensor 14 Mega pixel sensor

Lens 180º super wide angle field of view

Focus range 0.4m - ∞

1080p: 1920x1080 pixels (16:9), 30 fps

Video

960P*: 1280x960 pixels (4:3), 30 fps

EN-13

720p: 1280x720 pixels (16:9), 60 fps

720p *: 1280x720 pixels (16:9), 30 fps

Format: H.264 compression, saved as MPEG4 (.mp4) file

Dual video files for easy sharing

16.0 Mega Pixels:(4608x3456)

14.0 Mega Pixels(4384 x3288)

5.0 Mega Pixels: (2592x1944)

VGA:(640 x480)

Format: JPEG

Photo

Capture Modes: Single, Burst-shot*, Time lapse*

Built-in high quality microphone

2.5mm External microphone (not included)

Audio

AAC Compression, Automatic Gain Control

MicroSD/MicroSDHC with minimum Class 6 up to 32GB (not included)

Storage

Average Recording Times: about 4 hours (using 32GB mSD card in

1080p30/720p60)

USB2.0 (for data connection and battery charging)

HDMI

Connection

External Microphone

Built-in 1200 mAH Rechargeable Li-Polymer Battery

Power

Battery Life: Approx. 2 hrs/( 1 hr when operating with Wi-Fi PODZ in

CAMOCAM)

High quality Aluminum barrel and rubberized finishing

Housing

Depth up to 30 feet / 10 meters

Dimension 40 x 40 x 108 mm

Weight ~127.8(w/ PODZ), ~133.2g (w/ Wi-Fi PODZ)

* Settings can be changed through iON software or Mobile (with Wi-Fi PODZ)

EN-14

12. System Requirements

Operating system Windows® 7/XP SP3 /Vista and Mac 10.5 or above

CPU Pentium III or above

RAM At least 64MB

Interface USB 2.0 port

IMPORTANT

 Keep the lens clean. Dirt and fingerprints will affect the quality of the

picture.

 Close the PODZ properly for optimum water sealing. Do not open under

water.

 Rinse the camera with clean water after use and keep it dry for storage.

 Please refer to the detailed operation instructions in the user manual

TRADEMARK INFORMATION

® The iON logo is a registered trademark of World Wide Licenses Limited.

CamLOCK, PODZ, Shoot/Share and CAMOCAM and their respective

logos are trademarks or registered trademarks of World Wide Licenses

Rights Reserved.

EN-15

FCC Statement

Caution Statement

“Modifications not approved by the party responsible for compliance could

void the user’s authority to operate the equipment.”

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

Instruction Statement

NOTE: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

EN-16

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

WARNING: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY

RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED

MODIFICATIONS TO THE DEVICE. ANY SUCH MODIFICATIONS

COULD VOID THE USER’S AUTHORITY TO OPERATE THE

EQUIPMENT.

Questions?

Need Some Help?

This manual should

help you understand

your new product.

If you still have

questions,

visit our website:

www.ioncamera.com

Like Us:

www.facebook.com/ioncamera

Tweet Us:

www.twitter.com/ioncamera

DE-1

Vielen Dank für den Kauf der iON CAMOCAM HD Sportvideokamera.

Diese Kurzanleitung enthält die gemeinsamen Funktionen und Features der CAMOCAM und

CAMOCAM Wi-Fi. Die zusätzlichen Features und Funktionen der CAMOCAM Wi-Fi finden

Sie auf der Rückseite des Handbuchs.

Die iON CAMOCAM kann für das ultimative HD-Aufnahmeabenteuer am Fahrrad und

Helm-Kit oder Board-Kit befestigt werden.

Schnellstartanleitung

DE-2

Aufbau Ihrer Kamera

Gemeinsame Funktionen:

 Die iON CAMOCAM ist ein professioneller, qualitativ hochwertiger

Digital-Videorecorder, der Videos durch einfaches Betätigen eines Schiebeschalter im

vollen HD-Videoformat aufzeichnet.

 Er besitzt den neuesten 14 Megapixel-Sensor für großartige digitale Bilder.

 Ein hochwertiges 180 Grad-Objektiv liefert ein Superweitwinkel-Gesichtsfeld.

 Ihre Kamera unterstützt eine MicroSD-Karte nit bis zu 32GB, was Ihnen die

Aufzeichnung von Videos für ca. 4 Stunden bei 1080p und 30 Frames pro Sekunde

ermöglicht.

 Sie ist mit einer Mikrofonbuchse für den Anschluss eines externen Mikrofons

ausgestattet.*

 Dank des wasserdichten Gehäuses funktioniert die Kamera in einer Wassertiefe von

bis zu 10 Metern.

 Die iON CAMOCAM wiegt ca. 128g.

* Wenn ein externes Mikrofon (nicht im Lieferumfang enthalten) angeschlossen wurde, kann

über das integrierte Mikrofon kein Audio aufgezeichnet werden. Bitte beachten Sie, dass die

Kamera nicht mehr wasserdicht ist, sobald ein externes Mikrofon angeschlossen wird.

1. Verpackungsinhalt der CAMOCAM

Entfernen Sie vorsichtig die Verpackung und kontrollieren Sie, ob Sie folgendes Zubehör

erhalten haben:

DE-3

1

Sicherheitsriemen

Sichert die Kamera an der Halterung und bietet zusätzliche

Sicherheit.

2

USB-Kabel

1. Anschluss der Kamera an einen Computer für die

Datenübertragung oder den Kamera-Setup.

2. Aufladen der Kamera.

3

Dualer

USB-Autoadapter

An den Zigarettenanzünder des Autos anschließen und Ihre

Kamera simultan über das enthaltene USB-Kabel aufladen.

4

Fischerei- und

Jagd-Montierung

Siehe bitte Fischerei- und Jagd-Bildanleitung zur Montage an

Gewehr und Kamera.

5

CamLOCK

Befestigt die Kamera schnell am CamLOCK-Sockel oder

entfernt sie von diesem.

6

Garantiekarte

Bitte für die auf 1 Jahr beschränkte Herstellergarantie

aufbewahren.

7

Schnellstartanleitung

Bietet schnelle Informationen für die einfache Bedienung der

Kamera

Страница загружается...

iON Camocam Wi-Fi Инструкция по началу работы

Похожие модели бренда

Модели других брендов