Samsung RFG28MEPN Руководство пользователя

Бренд: Samsung

Модель: RFG28MEPN

Категория: Холодильники с параллельными дверьми (Side-by-Side)

Тип: Руководство пользователя

English

Refrigerator

user manual

imagine the possibilities

Thank you for purchasing a Samsung product.

Free Standing Appliance

This manual is made with 100% recycled paper.

DA99-03404F-12.indb 01DA99-03404F-12.indb 01 2015. 4. 25.  10:482015. 4. 25.  10:48

02_ safety information

SAFETY INFORMATION

• Before operating the appliance, please read this

manual thoroughly and retain it at a safe place near the

appliance for your future reference.

• Use this appliance only for its intended purpose as

described in this instruction manual. This appliance is

not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have

been given supervision or instruction concerning use of

the appliance by a person responsible for their safety.

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved.

Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children without supervision.

• Warnings and Important Safety Instructions in this

manual do not cover all possible conditions and

situations that may occur. It is your responsibility to

use common sense, caution, and care when installing,

maintaining, and operating your appliance.

• Because these following operating instructions cover

various models, the characteristics of your refrigerator

may differ slightly from those described in this manual

and not all warning signs may be applicable. If you

have any questions or concerns, contact your nearest

service center or find help and information online at

www.samsung.com.

Important safety symbols and

precautions:

WARNING

Hazards or unsafe practices that may result in

severe personal injury or death.

CAUTION

Hazards or unsafe practices that may result

in minor personal injury or property

damage.

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions carefully.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent

electric shock.

Call the contact center for help.

Note.

These warning signs are here to prevent injury to you

and others.

Please follow them carefully.

After reading this section, keep it in a safe place for

future reference.

CE Notice

This product has been determined to be in compliance

with the Low Voltage Directive(2006/95/EC), the

Electromagnetic Compatibility Directive (2004/108/EC),

RoHS Directive (2011/65/EU), Commission Delegated

Regulation (EU) No 1060/2010 and the Eco-Design

Directive(2009/125/EC) implemented by Regulation (EC)

No 643/2009 of the European Union.

SEVERE WARNING SIGNS

FOR TRANSPORTATION AND

SITE

• When transporting and installing the

appliance,care should be taken to ensure

that no parts of the refrigerating circuit are

damaged.

• R-600a or R-134a is used as a refrigerant. Check

the compressor label on the rear of the appliance or

the rating label inside the refrigerator to see which

refrigerant is used for your refrigerator.

• When this product contains flammable gas (Refrigerant

R-600a),

- Refrigerant leaking from the pipe work could ignite or

cause an eye injury. If a leak is detected, avoid any

naked ﬂames or potential sources of ignition and air

the room in which the appliance is standing for several

minutes.

- In order to avoid the creation of a ﬂammable gas-air

mixture if a leak in the refrigerating circuit occurs, the

size of the room in which the appliance may be sited

depends on the amount of refrigerant used.

WARNING

safety information

DA99-03404F-12.indb 02DA99-03404F-12.indb 02 2015. 4. 25.  10:482015. 4. 25.  10:48

safety information _03

- Never start up an appliance showing any signs of

damage. If in doubt, consult your dealer. The room

where the refrigerator will be sited must be 1m³ in size

for every 8g of R-600a refrigerant inside the appliance.

The amount of refrigerant in your particular appliance is

shown on the identiﬁcation plate inside the appliance.

- If the appliance contains isobutane refrigerant

(R-600a), a natural gas with high environmental

compatibility that is, however, also combustible. When

transporting and installing the appliance, care should

be taken to ensure that no parts of the refrigerating

circuit are damaged.

SEVERE WARNING SIGNS

FOR INSTALLATION

• Do not install this appliance in a humid, oily or

dusty location, in a location exposed to direct

sunlight and water (rain drops).

- Deteriorated insulation of electrical parts may cause an

electric shock or ﬁre.

• Do not place this refrigerator in direct sunlight or

expose to the heat from stoves, room heaters or other

appliances.

• Do not plug several appliances into the same multiple

power board.

The refrigerator should always be plugged into its own

individual electrical outlet which has a voltage rating

that matched the rating plate.

- This provides the best performance and also prevents

overloading house wiring circuits, which could cause a

ﬁre hazard from overheated wires. If the wall socket is

loose, do not insert the power plug.

- There is a risk of electric shock or ﬁre.

• Do not use a cord that shows cracks or abrasion

damage along its length or at either end.

• Do not bend the power cord excessively or place

heavy articles on it.

• Do not use aerosols near the refrigerator.

- Aerosols used near the refrigerator may cause an

explosion or ﬁre.

• Do not install this appliance in a location where gas

may leak.

- This may result in an electric shock or ﬁre.

• The installation or any service of this appliance

is recommended by a qualified technician or

service company.

- Failing to do so may result in an electric shock, ﬁre,

explosion, problems with the product, or injury.

• This refrigerator must be properly installed and located

in accordance with the manual before it is used.

• Connect the power plug in proper position with the

cord hanging down.

WARNING

- If you connect the power plug upside down, wire can

get cut off and a cause ﬁre or an electric shock.

• Make sure that the power plug is not squashed or

damaged by the back of the refrigerator.

• When moving the refrigerator, be careful not to roll over

or damage the power cord.

- This constitutes a ﬁre hazard.

• The appliance must be positioned so that the plug is

accessible after installation.

• The refrigerator must be grounded.

- You must ground the refrigerator to prevent any power

leakages or electric shocks caused by current leakage

from the refrigerator.

• Never use gas pipes, telephone lines or other potential

lightening rods as ground.

- Improper use of the ground plug can result in an

electric shock.

• If the power cord is damaged, have it

replaced immediately by the manufacturer or

its service agent.

• The fuse on the refrigerator must be changed by a

qualified technician or service company.

- Failing to do so may result in an electric shock or

personal injury.

CAUTION SIGNS FOR

INSTALLATION

• Keep ventilation opening in the appliance

enclosure or mounting structure clear of

obstruction.

• Allow the appliance to stand for 2 hours after

installation.

SEVERE WARNING SIGNS

FOR USING

• Do not insert the power plug with wet hands.

• Do not store articles on the top of the

appliance.

- When you open or close the door, the articles may fall

and cause a personal injury and/or material damage.

• Do not put items filled with water on the refrigerator.

- If spilled, there is a risk of ﬁre or electric shock.

• Do not let children hang on the door.

- Failure to do so may cause serious personal injury.

• Do not leave the doors of the refrigerator open while

the refrigerator is unattended and do not let children

enter inside the refrigerator.

CAUTION

WARNING

DA99-03404F-12.indb 03DA99-03404F-12.indb 03 2015. 4. 25.  10:482015. 4. 25.  10:48

04_ safety information

• Do not allow babies or children go inside the drawer.

- It can cause death from suffocation by entrapment or

personal injury.

• Do not sit on the Freezer door.

- The door may be broken and cause a personal injury.

• To prevent children entrapment, you must reinstall the

divider using provided screws after cleaning or other

actions if you removed the divider from the drawer.

• Never put fingers or other objects into the dispenser

hole.

- Failure to do so may cause personal injury or material

damage.

• Do not store volatile or flammable substances such

as benzene, thinner, alcohol, ether or LP gas in the

refrigerator.

- The storage of any of such products may cause an

explosion.

• Do not store low temperature-sensitive pharmaceutical

products, scientific materials or other low temperature-

sensitive products in the refrigerator.

- Products that require strict temperature controls must

not be stored in the refrigerator.

• Do not place or use electrical appliance inside the

refrigerator, unless they are of a type recommended by

the manufacturer.

• Do not use a hair dryer to dry the inside of the

refrigerator. Do not place a lighted candle in the

refrigerator for removing bad odors.

- This may result in an electric shock or ﬁre.

• Do not touch the inside walls of the freezer or products

stored in the freezer with wet hands.

- This may cause frostbite.

• Do not use me chanical devices or any other means

to accelerate the defrosting process, other than those

recommended by the manufacturer.

• Do not damage the refrigerant circuit.

• This product is intended only for the storage

of food in a domestic environment.

• Bottles should be stored tightly together so that they

do not fall out.

• In the event of a gas leak (such as propane gas, LP

gas, etc.), ventilate immediately without touching the

power plug. Do not touch the appliance or power cord.

- Do not use a ventilating fan.

- A spark may result in an explosion or ﬁre.

• Use only the LED Lamps provided by manufacturer or

service agent.

• Children should be supervised to ensure that they do

not play with and/or climb into the appliance.

- Keep ﬁngers out of “pinch point” areas; clearances

between the doors and cabinet are necessarily small.

Be careful when you open the doors when children are

in the area.

• Do not disassemble or repair the refrigerator

by yourself.

- You run a risk of causing a ﬁre, malfunction and/ or

personal injury. In case of malfunction, please contact

your service agent.

• If the appliance generates a strange noise, a

burning or smell or smoke, unplug the power

plug immediately and contact your nearest

service center.

- Failing to do so may result in an electric or ﬁre hazards.

• If you experience difficulty when changing the light,

contact service agent.

• If the products is equipped with the LED Lamp, do

not disassemble the Lamp Cover and LED Lamp by

yourself.

- Please contact your service agent.

• If any dust or water is in the refrigerator, pull out power

plug and contact your Samsung Electronics service

center.

- There is a risk of ﬁre.

CAUTION SIGNS FOR USING

• To get best performance from the product,

- Do not place foods too closely in front of the vents

at the rear of the appliance as it can obstruct free air

circulation in the refrigerator compartment.

- Wrap the food up properly or place it in airtight

containers before putting it into the refrigerator.

- Do not put any newly introduced food for freezing near

to already existing food.

• Do not place carbonated or fizzy drinks in the freezer

compartment. Do not put bottles or glass containers in

the freezer.

- When the contents freeze, the glass may break and

cause personal injury and property damage.

• Do not change or modify the functionality of the

refrigerator.

- Changes or modiﬁcations may result in a personal

injury and/or property damage. Any changes or

modiﬁcations performed by a 3rd party on this

completed appliance are neither covered under

Samsung warranty service, nor is Samsung

responsible for safety issues and damages that result

from 3rd party modiﬁcations.

• Do not block air holes.

- If the air holes are blocked, especially with a plastic

bag, the refrigerator can be over cooled. If this cooling

period lasts too long, the water ﬁlter may break and

cause water leakage.

• Please observe maximum storage times and expiry

CAUTION

DA99-03404F-12.indb 04DA99-03404F-12.indb 04 2015. 4. 25.  10:482015. 4. 25.  10:48

safety information _05

dates of frozen goods.

• Fill the water tank, ice tray, water cubes only with

potable water.

• Use only the ice-maker provided with the refrigerator.

• The water supply to this refrigerator must only be

installed/connected by a suitably qualified person and

connected to a potable water supply only.

• In order to operate the ice-maker properly, water

pressure of 138~862kpa(1.4~8.8kgf/cm3) is required.

• Do not spray volatile material such as insecticide onto

the surface of the appliance.

- As well as being harmful to humans, it may also result

in an electric shock, ﬁre or problems with the product.

CAUTION SIGNS

FOR CLEANING AND

MAINTENANCE

• Do not directly spray water inside or outside

the refrigerator.

- There is a risk of ﬁre or electric shock.

• Do not use or place any substances sensitive to

temperature such as inflammable sprays, inflammable

objects, dry ice, medicine, or chemicals near the

refrigerator. Do not keep volatile or inflammable objects

or substances (benzene, thinner, propane gas, etc.) in

the refrigerator.

- This refrigerator is for storing food only.

- This may result in a ﬁre or an explosion.

• Do not spray cleaning products directly on the display.

- Printed letters on the display may come off.

• Remove any foreign matter or dust from the power

plug pins. But do not use a wet or damp cloth when

cleaning the plug, remove any foreign material or dust

from the power plug pins.

- Otherwise there is a risk of ﬁre or electric shock.

• Never put fingers or other objects into the dispenser

hole and ice chute.

- It may cause a personal injury or material damage.

• Unplug the refrigerator before cleaning and

performing maintenance.

SEVERE WARNING SIGNS

FOR DISPOSAL

• Ensure that none of the pipes on the back of

the appliance are damaged prior to disposal.

• R-600a or R-134a is used as a refrigerant. Check

the compressor label on the rear of the appliance or

the rating label inside the refrigerator to see which

refrigerant is used for your refrigerator. When this

CAUTION

WARNING

product contains flammable gas (Refrigerant R-600a),

contact your local authority in regard to safe disposal

of this product. Cyclopentane is used as an insulation

blowing gas. The gases in insulation material require

special disposal procedure. Please contact your

local authorities in regard to the environmentally safe

disposal of this product. Ensure that none of the pipes

on the back of the appliances are damaged prior to

disposal. The pipes shall be broken in the open space.

• It is hazardous for anyone other than an Authorised

Service Person to service this appliance. In Queensland

– the authorized Service Person MUST hold a Gas

Work Authorisation or Licence for hydrocarbon

refrigerants, to carry out Servicing or repairs which

involve the removal of covers. (For Australia only)

• When disposing of this product or other refrigerators,

remove the door/door seals, door latch so that small

children or animals cannot become trapped inside.

Leave the shelves in place so that children may not

easily climb inside. Children should be supervised to

ensure that they do not play with the old appliance.

• Please dispose of the packaging material for this

product in an environmentally friendly manner.

ADDITIONAL TIPS FOR PROPER

USAGE

• In the event of a power failure, call the local office of

your Electricity Company and ask how long it is going

to last.

- Most power failures that are corrected within an hour

or two will not affect your refrigerator temperatures.

However, you should minimize the number of door

openings while the power is off.

- Should the power failure last more than 24 hours,

remove all frozen food.

• If keys are provided with the refrigerator, the keys

should be kept out of the reach of children and not be

in the vicinity of the appliance.

• The appliance might not operate consistently (possibility

of temperature becoming too warm in the refrigerator)

when sited for an extended period of time below the

cold end of the range of temperature for which the

refrigerating appliance is designed.

• Do not store food which spoils easily at low

temperature, such as bananas, melons.

• Your appliance is frost free, which means there is no

need to manually defrost your appliance, as this will be

carried out automatically.

• Temperature rise during defrosting can comply with

ISO requirements. But if you want to prevent an

undue rise in the temperature of the frozen food while

defrosting the appliance, please wrap the frozen food

up in several layers of newspaper.

• Any increase in temperature of frozen food during

defrosting can shorten its storage life.

DA99-03404F-12.indb 05DA99-03404F-12.indb 05 2015. 4. 25.  10:482015. 4. 25.  10:48

06_ safety information

Contents

SETTING UP YOUR REFRIGERATOR ………………………………………………… 07

OPERATING YOUR SAMSUNG REFRIGERATOR …………………………………… 13

TROUBLESHOOTING …………………………………………………………………… 22

Saving Energy Tips

- Install the appliance in a cool, dry room with adequate

ventilation.

Ensure that it is not exposed to direct sunlight and

never put it near a direct source of heat (radiator, for

example).

- Never block any vents or grilles on the appliance.

- Allow warm food to cool down before placing it in the

appliance.

- Put frozen food in the refrigerator to thaw. You can

then use the low temperatures of the frozen products

to cool food in the refrigerator.

- Do not keep the door of the appliance open for too

long when putting food in or taking food out. The

shorter time for which the door is open, the less ice will

form in the freezer.

- Clean the rear of the refrigerator regularly. Dust

increases energy consumption.

- Do not set temperature colder than necessary.

- Ensure sufﬁcient air exhaust at the refrigerator base

and at the back wall of the refrigerator. Do not cover air

vent openings.

- Allow clearance to the right, left, back and top when

installing.

This will help reduce power consumption and keep

your energy bills lower.

- For the most efﬁcient use of energy, please keep the

all inner ﬁttings such as baskets, drawers, shelves on

the position supplied by manufacturer.

This appliance is intended to be used

in household and similar applications

such as

- staff kitchen areas in shops, ofﬁces and other working

environments;

- farm houses and by clients in hotels, motels and other

residential type environments;

- bed and breakfast type environments;

- catering and similar non-retail applications.

DA99-03404F-12.indb 06DA99-03404F-12.indb 06 2015. 4. 25.  10:482015. 4. 25.  10:48

setting up _07

01 SETTING UP

GETTING READY TO INSTALL

THE REFRIGERATOR

Congratulations on your purchase of the Samsung

Refrigerator. We hope you enjoy the state-of-art

features and efﬁ ciencies that this new appliance

offers.

Selecting the best location for the

Refrigerator

• A location with easy access to the water supply.

• A location without direct exposure to sunlight.

• A location with level (or nearly level) flooring.

• A location with enough space for the Refrigerator

doors to open easily.

• Allow sufficient space to the right, left, back and

top for air circulation.

If the Refrigerator does not have enough space,

the internal cooling system may not work

properly.

• Please ensure that appliance can be moved freely

in the event of maintenance & service.

• Do not install the Refrigerator where the

temperature will go below 50ºF (10ºC).

Depth “A” 858mm

Width “B” 908mm

Height “C” 1740mm

Overall Height “D” 1774mm

Depth “E” 920mm

1578mm

335mm

125°

50mm

908mm

748mm

1233mm

108mm

46mm

1346mm

Each measurement based on the design

dimension, so it may differ depending on

the measuring method.

When moving your refrigerator

To prevent ﬂ oor damage be sure the front leveling

legs are in the up position(above the ﬂ oor).

Refer to ‘ADJUSTING THE DOORS’ in the manual

(at page 10)

FLOORING

For proper installation, this refrigerator must be

placed on a level surface of hard material that is the

same height as the rest of the ﬂ ooring. This surface

should be strong enough to support a fully loaded

refrigerator. To protect the ﬁ nish of the ﬂ ooring, cut

a large section of the cardboard carton and place

under the refrigerator where you are working. When

moving, be sure to pull the unit straight out and push

back in straight.

setting up your refrigerator

DA99-03404F-12.indb 07DA99-03404F-12.indb 07 2015. 4. 25.  10:482015. 4. 25.  10:48

08_ setting up

2. Disconnect two connectors (3) at each side of

the top cap and the one connector (4) on left

side door. Remove the tube (5) with pressing the

dark gray color part (6) of the water line coupler.

3. Remove the 3 hex head bolts ( 7 ) attached to

the upper left and right door hinges with a socket

wrench (10mm). Remove the ground screw ( 8 )

attached to the upper left and right door hinges

with a philips screwdriver(+). Remove the upper

left and right door hinges ( 9 ).

Socket wrench

4. Lift the door straight up to remove.

5. Remove the screw (10) attached to the

lower left and right door hinges with a philips

screwdriver(+). Remove the 2 hex head bolts (11)

attached to the lower left and right door hinges

with an allen wrench (3/16”). Remove the lower

left and right door hinges ( 12 ).

Allen wrench

REMOVING THE

REFRIGERATOR DOORS

If the Refrigerator is too large to pass through your

doorway easily, you can remove the refrigerator

doors.

Disconnect power to the refrigerator before

removing the door or drawer.

• Be careful not to drop, damage or scratch

the door/drawer while removing them.

• Be careful not to get injured while removing the

door/drawer.

• Reattach the door/drawer properly to avoid:

- Moisture from air leakage.

- Uneven door alignment.

- Wasting energy due to improper door seal.

Tools you will need (Not provided)

Philips

screwdriver (+)

Flat-blade

screwdriver (-)

Socket wrench

(10mm)

Pliers Allen wrench

(3/16”) (5mm)

Disassemble the Refrigerator doors

1. With the door opened, remove the Hinge Cover

cap (1) with a Flat head screwdriver, and close

the door. Remove the 3 screws holding down the

Hinge Cover and remove the Hinge Cover (2) .

WARNING

DA99-03404F-12.indb 08DA99-03404F-12.indb 08 2015. 4. 25.  10:482015. 4. 25.  10:48

setting up _09

01 SETTING UP

When reassembling it, be sure to connect the

wire harness.

If it is not connected, the Flex Room does not

work.

4. Remove 2 hex head bolts from sides with a

socket wrench (10mm)

5. Lift up the Flex door from the rails.

Putting too much food into the freezer

drawers can prevent the freezer from closing

completely and can cause frost build-up.

ASSEMBLE THE FLEX DOOR

To reattach the ﬂ ex door,assemble parts in reverse

order.

Be sure to connect the Flex Door Wire

Connector.

If it is not connected, the Flex Room does not

work.

CAUTION

REATTACHING THE

REFRIGERATOR DOORS

To reattach the fridge doors, assemble parts in

reverse order.

1. The Water Line must be fully inserted to the

center of transparent coupler (Type A) or the

Guide Lines (Type B) to prevent water leakage

from the dispenser.

Center of Transparent coupler

The Guide Lines

Dispenser

Type A

Type B

DISASSEMBLE THE FLEX DOOR

1. Take out the Flex Zone (1) by lifting it up.

2. Take off the cover (2) w/harness with a flat-

blade screwdriver (-).

3. Press the locking tab and separate the Wire

Connector.

DA99-03404F-12.indb 09DA99-03404F-12.indb 09 2015. 4. 25.  10:482015. 4. 25.  10:48

10_ setting up

ASSEMBLE THE FREEZER

DRAWER

To reattach the freezer drawer, assemble parts in

reverse order.

ADJUSTING THE DOORS

Now that the doors are back on the Refrigerator, you

want to make sure the Refrigerator is level so that

you can make ﬁ nal adjustments. If the Refrigerator

is not level, it will not be possible to get the doors

perfectly even.

Insert a ﬂ at-blade screwdriver (-) into a notch on the

left control lever, and turn it count clockwise to level

the refrigerator. (You turn the lever clockwise to lower

the refrigerator and counterclockwise to raise it.)

flat-blade

screwdriver(-)

Control

Lever

Both control levers must be touching the ﬂ oor

to avoid possible personal injury or property

damage because of tipping.

If the right side is lower, perform the same

procedure, but with the right control lever.

CAUTION

DISASSEMBLE THE FREEZER

DRAWER

1. Push the upper drawer in completely.

2. Remove the tilting pocket (1) by pulling on both

brackets (2) upward at the same time.

3. Take out the lower basket (3) by lifting the

basket up from rail system.

4. Remove four 10mm hex-head bolts from both

sides.

5. Lift the freezer door up from the rails.

DA99-03404F-12.indb 10DA99-03404F-12.indb 10 2015. 4. 25.  10:482015. 4. 25.  10:48

setting up _11

01 SETTING UP

1. Locate the height-adjuster (1) in the freezer

drawer.

Unscrew the four Phillips screws (2) slightly to

loosen the door.

2. Loosen the controller screw (3) with a Phillips

screwdriver.

3. Find the best level to align the door slope.

Example) The slope is about 2mm (0.08inch) as shown below.

- Rotate the Height Adjuster to -2.0 to reduce the door slope.

Slope

Reference

plane

After adjustment, ﬁ rst tighten screw (3) and

then screw (2) .

CHECKING THE WATER LINE

A water dispenser is one of the helpful features on

your new Samsung Refrigerator. To help promote

better health, the Samsung water ﬁ lter removes

unwanted particles from your water.

MAKING MINOR ADJUSTMENTS

BETWEEN DOORS

Remember a level Refrigerator is necessary for

getting the doors perfectly even. If you need

help, review the previous section on leveling the

Refrigerator.

Fixed

Part

Adjustment

part

1. If you open the drawer (1), you can see the

lower hinge (2) .

2. Insert a philips screwdriver (+) (3) into the shaft

(4) of the lower hinge.

3. Adjust the height by turning a philips screwdriver

(+) (3) clockwise (

) or counterclockwise

( ).

When you turn a philips screwdriver (+)

counterclockwise (

), the door will

move up.

ADJUSTING THE FREEZER

DRAWER LEVEL

Freezer Drawer

Adjustment part

DA99-03404F-12.indb 11DA99-03404F-12.indb 11 2015. 4. 25.  10:482015. 4. 25.  10:48

12_ setting up

INSTALLING THE WATER LINE

Connecting the water line to the

Refrigerator.

There are several items that you need to purchase to

complete this connection. You may ﬁ nd these items

sold as a kit at your local hardware store.

• 6.35mm compression

nut

• copper tubing

• plastic tubing • ferrule

Household water line

Plastic tubing (A)

(Supplied)

Ferrule (Not

supplied)

Compression

nut (A) (1/4”)

(Supplied)

Compression

fitting (Supplied)

Molded

end(Bulb)

Compression

nut (B) (1/4”)

(Not supplied)

Copper tubing

(Not supplied)

Plastic tubing (B)

(Not supplied)

Refrigerator

1. Slip the compression nut through the supplied

plastic tubing(A).

2. Tighten the compression nut (A) onto the 6.35mm

compression fitting.

- If you are using copper tubing, slip the

compression nut (B)(not included) and ferrule

(not included) on copper tubing (not included) as

shown.

- If you are using plastic tubing (B), insert the

molded end(Bulb) of the plastic tubing (B)into

the compression fitting. Do not use without the

molded end(Bulb) of the plastic tubing (B).

3. Tighten the compression nut (B)onto the

compression fitting. Do not over-tighten the

compression nut (B).

4. Turn water on and check for any leakage.

Only connect the water line to a drinkable water

source. If you have to repair or disassemble the

water line, cut off 6.35mm of the plastic tubing to

make sure you get a snug, leak-free connection.

However, it does not sterilize or destroy

microorganisms. You may need to purchase a

water purifying system to do that. In order for the

ice-maker to operate properly, a water pressure of

138~862 Kpa is required.

Under normal conditions, a 170 cc (5.75 oz.) cup

can be ﬁ lled in 10 seconds. If the Refrigerator

is installed in an area with low water pressure

(below 138Kpa), you can install a booster pump to

compensate for the low pressure.

Make sure the water storage tank inside the

Refrigerator is properly ﬁ lled. To do this, press the

water dispenser lever until the water runs from the

water outlet.

Water line installation kits are available at extra cost

from your dealer.

We recommend using a water supply kit that

contains copper tubing.

The new hose-sets supplied with the

appliance are to be used and that old

hose-sets should not be reused.

Check the accessory list below.

Compression fitting Compression nut

Connecting to the water supply line

1. First, shut off the main water supply line and turn

the ice-maker off.

2. Locate the nearest cold water drinking line.

3. After connecting the water supply with water

filter, turn on water supply and Flush 3L through

filter before use (flush approximately 6 minutes).

Cold Water Line

Pipe clamp

Shut off valve

Water line

installation

kit

DA99-03404F-12.indb 12DA99-03404F-12.indb 12 2015. 4. 25.  10:482015. 4. 25.  10:48

operating _13

02 OPERATING

( 3 )

Alarm /

hold 3

sec for

Filter

Reset

The Alarm/Hold 3 sec for Filter Reset

button serves two purposes:

- To turn the door open alarm on and off

- To reset the water ﬁ lter life indicator.

1) Door Alarm Function

If the door alarm is set to On, an alarm

beeps if any refrigerator door is left open

for more than three minutes.

The beeping stops when you close the

door. The door alarm function is pre-set

to On in the factory. You can turn it off by

pressing and then releasing the Alarm/

Hold button. You can turn it back on in the

same fashion. The icon lights up when the

function is on.

2) Water Filter Life Indicator Function

After you replace the water ﬁ lter, press and

hold the Alarm/Hold 3 sec for Filter Reset

button to re-set the water ﬁ lter life indicator.

The Filter icon will turn red to let you know

it is time to change the water ﬁ lter after six

months (about 1135 L).

Some areas have large amounts

of lime in their water, which causes

the water ﬁ lter to clog more quickly.

If this is the case in your area, you

will have to change the ﬁ lter more

frequently than every six months.

(Filter Reset)

( 4 )

Lighting

Pressing the Lighting button turns on the

Dispenser LED lamp (under the display)

in continuous mode so that it stays on

continuously. The button also lights up. If

you want the Dispenser lamp to come on

only when some one uses the dispenser,

press the Lighting button to turn the

continuous mode off.

USING THE CONTROL PANEL

( 1 )

Energy

Saver

Press the Energy Saver button for better

energy efﬁ ciency.

The Energy Saver icon lights up when you

press the Energy Saver button.

The Energy Saver function is automatically

set to “ON” when power is supplied to the

refrigerator.

If condensation or water drops appear on

the doors, turn the Energy Saver mode off.

( 2 )

Power

Freeze

The Power Freeze function substantially

speeds up the freezer compressor,

causing the freezer to cool down rapidly

to a temperature you choose. When you

press the Power Freeze button, the Power

Freeze icon lights up.

Power Freeze is useful if you need to quick

freeze an item, to make a large quantity of

ice, or to cool the freezer rapidly if it has

warmed dramatically (for example, if the

door was left open).

To turn off Power Freeze, press the Power

Freeze button again. Power Freeze turns

off automatically after 72hours to decrease

energy consumption.

When you use this function the energy

consumption of the refrigerator will

increase. Remember to turn it off when you

don’t need it and return the freezer to your

original temperature setting. If you need to

freeze large amount of food stuff, activate

Power Freeze function at least 24 hours

before.

Operating your samsung

refrigerator

7 8

DA99-03404F-12.indb 13DA99-03404F-12.indb 13 2015. 4. 25.  10:482015. 4. 25.  10:48

14_ operating

( 10 )

Filter

Water ﬁ lter usage

1. Normally the filter indicator is blue,

yellow, or green when you purchase or

install your refrigerator, depending on

your model.

2. After you use about 1020 L of water,

the filter indicator turns Light Pink.

(about 5 months)

3. After you use about 1135 L of water,

the filter indicator turns Red. (about

6 months) The icon will blink red for

several seconds when you open or

close the door.

4. Remove the old water filter and install a

new one when the filter indicator is red.

Reset the filter indicator by pressing

Alam/Hold 3 sec for Filter Reset button

for 3sec.

• If water is not dispensing or

dispensing slowly, you need to

replace the water filter because

the water filter is clogged.

• Some areas have large amounts

of lime in their water, which

causes the water filter to clog

more quickly.

(Reset the

indicator)

(Red)

USING THE CONTROL PANEL

Basic temperature of Freezer and

Refrigerator Compartments

The basic temperature and/or recommended

temperature of Freezer and Refrigerator

Compartments are -19°C and 3°C respectively.

If the temperature of Freezer and Refrigerator

Compartments are too high or low, adjust the

temperature manually.

Controlling the Freezer temperature

The Freezer temperature can be set between -14ºC

and -22ºC to suit your particular needs. Press

the Freezer button repeatedly until the desired

temperature is shown in the temperature display.

The temperature will move 1°C degrees with each

press (-19°C → -20°C → -21°C → -22°C → -14°C →

-15°C → -16°C → -17°C → -18°C → -19°C). Keep

in mind that foods like ice cream may melt at 0°C.

The temperature display will move sequentially from

-22°C to -14°C.

( 5 )

Power

Cool

The Power Cool function substantially

speeds up the refrigerator compressor,

causing the refrigerator to cool down

rapidly to a temperature you choose. When

you press the Power Cool button, the

Power Cool icon lights up.

Power Cool is useful if you need to quickly

cool items or need to cool the refrigerator

rapidly if it has warmed dramatically (for

example, if the door was left open).

To turn off Power Cool, press the Power

Cool button again. Power Cool turns off

automatically after 2 1/2 hours to decrease

energy consumption.

When you turn on Power Cool, the

refrigerator’s compressor speeds

up and is louder than during normal

operation.

(6)

Ice Off

(Hold 3 sec

for Child lock)

If you don’t want to make more ice, press

the Ice Off button. Pressing this button

3 second locks the display panel and

dispenser buttons so the buttons can not

be used.The Child Lock icon lights up to

indicate you’ve activated the Child Lock

function.

(7)

Cubed Ice

(8)

Crushed

Ice

Press the Cubed Ice or Crushed Ice

button to select the type of ice you want

dispensed. Each time you press the

button, the cubed and crushed ice modes

alternate and the Cubed or Crushed ice

icon lights up, indicating your selection.

If you don’t need ice, turn the function off

to save on water and energy consumption

(See Ice Off below).

(Cubed)

(Crushed)

( 9 )

Ice Off

If you don’t want to make more ice, press

the Ice Off button.

The icon will light up and the Ice-Maker

stops making ice.

We recommend you stop ice making if the

following occur:

- There is enough ice in the ice bucket.

- You want to save water and energy.

- Water is not being supplied to the

refrigerator.

If the ice maker function is ON, and

the water line is not connected,

there will be a water valve noise

from back of the unit. Press the

Ice Off(6) button until the Ice Off

indicator (

) illuminates.

DA99-03404F-12.indb 14DA99-03404F-12.indb 14 2015. 4. 25.  10:482015. 4. 25.  10:48

operating _15

02 OPERATING

You can choose the type of ice by pushing the

cubed or crushed button ﬁ rst.

Using the Water lever

( 2 )

Push the Water lever

dispenser ( 2 ) gently with your

glass. Water will be released

from the dispenser.

Even if you push the water

and Ice lever simultaneously,

the dispenser operates only

the option you selected or

pushed ﬁ rst.

Using the Ice & Water Dispenser

together

To get Ice and water, push the Ice lever ( 1 ) ﬁ rst for

ice, then move your glass glass down and press the

water dispenser lever ( 2 ) for water.

Do not pull the

lever out. You could

damage or break the

lever’s spring.

• To clean the

ice bin/bucket,

wash with a mild

detergent, rinse

well, and dry

thoroughly it.

Do not use harsh or abrasive cleaners or

solvents.

• When you select Cubed Ice after using the

Crushed Ice mode, a small amount of residual

crushed ice might be produced.

• In case ice doesn’t come out, pull out the ice

bucket and press the test button located on the

right side of ice maker.

• Do not press the test button continuously when

the tray is filled with ice or water. Water may

overflow or ice may jam the bucket.

• Normal Use

To ﬁ ll the ice bucket to maximum capacity after

installation, follow these steps:

1. Allow your refrigerator to operate and cool down

for 24 hours (or 1 full day).

- Waiting 24 hours will allow your ice maker to

cool properly.

2. Dispense 4 to 6 ice cubes into the glass.

3. After 8, and then 16 hours, dispense a full glass

of ice.

Controlling the Refrigerator

temperature

The Refrigerator temperature can be set between

7ºC and 1ºC to suit your particular needs. Press

the Fridge button repeatedly until the desired

temperature is shown in the temperature display.

The temperature will move 1°C degrees with each

press (3°C → 2°C → 1°C → 7°C → 6°C → 5°C →

4°C → 3°C). The temperature control process for the

Fridge works just like the Freezer process.

Press the Fridge button to set your desired

temperature. After a few seconds, the Fridge will

begin adjusting towards the newly set temperature.

This will be reﬂ ected in the digital display.

- The temperature of the Freezer, fridge

or Convertible Room may rise when you

open the doors too frequently, or if a large

amount of warm or hot food is placed

inside.

- This may cause the digital display to blink. Once

the Freezer and fridge temperature return to their

normal set temperatures, the blinking will stop.

- If the blinking continues, you may need to “reset”

the Refrigerator. Try unplugging the appliance,

wait for around 10 minutes and then plug the

power cord back in.

- If there is an communication error between the

Display and Main Controller, the Convertible

Display light may blink. Once the normal set

temperatures are reached, the blinking will stop.

If the blinking continues for a long period of time,

please contact a Samsung Electronics Service

Center.

USING THE COLD WATER

DISPENSER

Press the Ice / Water button to select the type of you

want.

Using the ice lever ( 1 )

Push the Ice lever dispenser ( 1 ) gently with your

glass. Ice will be released from the dispenser.

NO ICE

Select this if you want to turn ice

maker off

check the water

level

Test button

CAUTION

DA99-03404F-12.indb 15DA99-03404F-12.indb 15 2015. 4. 25.  10:482015. 4. 25.  10:48

16_ operating

Water clouding phenomenon

All water provided to refrigerators ﬂ ows through the core ﬁ lter

which is an alkaline water ﬁ lter. In this process, the pressure

in the water that has ﬂ owed out of the ﬁ lter gets increased,

and oxygen and nitrogen become saturated. When this water

ﬂ ows out in the air, the pressure plummets and the oxygen

and nitrogen get supersaturated so that they turn into gas

bubbles. The water could look misty due to these oxygen

bubbles.The water may look temporarily cloudy due to these

oxygen bubbles. After a few seconds, the water will look clear.

Please wait 1 second before removing the cup after

dispensing water to prevent spills. Do not pull out the

lever dispenser after taking out ice or water. It comes back

automatically. Ice is made in cubes.

When you select “Crushed”, the ice-maker grinds the ice

cubes into crushed ice.

PARTS AND FEATURES

Use this page to become more familiar with the

parts and features of the Refrigerator.

(2)

(1)

(3)

(13)

(4)

(14)

(6)

(5)

(7)

(8)

(9)

(11)

(10)

(9)

(15)

(12)

( 1 ) Light

( 2 ) FF Ice-Maker

( 3 ) Foldable-Shelf

( 4 ) Fixed-Shelf

( 5 ) Vertical Hinged Section

( 6 ) Vegetable & Fruit Drawers

( 7 ) Water Filter

( 8 ) Light

( 9 ) Auto Closer

( 10 ) Convertible Room

( 11 ) Auto Pull Out Drawer

( 12 ) Freezer Drawer Bin

( 13 ) Fixed-Shelf

( 14 ) 2 Step Foldable-Shelf

( 15 ) Door Bins

• When you press the Test button, you will hear the

refrigerator chime (ding-dong). When the chime

sounds, release the Test button.

• The chime sounds automatically again to let you

know the ice maker is working well.

If a power failure occurs, ice cubes may melt

then freeze together when the power comes

back on, causing the dispenser to be out of

order. To prevent this problem, after a power

failure, pull out the ice bucket and discard the

residual ice or water.

After you dump the ice from the ice bucket,

you should press the dispenser lever once

with the ‘ICE CUBED’ or ‘CRUSHED’

function ON. The ice maker will make new ice

faster after you return the ice bucket in the

refrigerator.

If you use all the ice at once, you must

repeat Steps 2 and 3 on the previous page.

However, only wait 8 hours before dispensing

the ﬁ rst 4 to 6 ice cubes. This will replenish

the ice cubes and ensure maximum ice

production.

Using the ice off function

PULL

PUSH

When selecting the Ice Off mode, remove all ice cubes

from the bucket. If you are not using the ice dispenser, the

ice cubes may clump together. Pull the lock lever forward

to throw away ice cubes or remove clumped ice from the

bucket. Push the bucket back until you hear a click.

If you have a long vacation or business trip, close

the water valve and shut off the water supply to

the Refrigerator. This will help prevent accidental

leakages. Do not disassemble the Ice-maker

personally. It may cause disorder. Do not wash or

spray the ice bucket with water. Just wipe it with a

dry cloth. In order to operate the ice-maker properly,

water pressure of 138~862 Kpa is required.

CAUTION

DA99-03404F-12.indb 16DA99-03404F-12.indb 16 2015. 4. 25.  10:482015. 4. 25.  10:48

operating _17

02 OPERATING

Wine

Party Dishes

Deli

Snacks

• wine • pineapples

• cocktails • lemons

• cakes • biscuits

• cheeses • potatoes

Cold

Drinks

Meat

Fish

• bottled water • steaks

• juice • cold cuts

• soft drinks • bacon

• beer • chili dogs

Fruit and vegetables may be damaged under

the “Meat Fish” setting.

Do not store lettuce or other leafy produce in

the Flex Zone.

Do not store glass bottles in the Flex Zone

under the “Cold Drinks” or “Meat/Fish”

setting. If they are frozen, they can break and

cause personal injury.

REMOVING THE

REFRIGERATOR ACCESSORIES

1. Door Bins & Dairy Compartment

To remove - Simply lift the bin up and pull straight

out.

To relocate - Slide it in above the desired location

and push down until it stops.

Injury may occur if the door bins are not ﬁ rmly

assembled. Do not allow children to play with

bins. Sharp corners of the bins may cause

injury.

Do not adjust a bin full of foods.

Dust removal method - Remove the guard and wash

in water.

USING FLEX ZONE

The Flex Zone is a full-width drawer with an

adjustable temperature control. You can use the

Flex Zone for large party trays, deli items, wines,

pizzas, beverages, or miscellaneous items. There

is a temperature sensor which lets you adjust the

amount of cold air allowed into the Zone. The control

buttons are located on the cap door center.

• Press the Temp button repeatedly until your

desired mode is lit.

• Each time you press the Temp button, you

change the mode in this order: Meat/Fish mode

(-1°C), Cold Drinks mode (1°C), Deli/Snack

(3°C), Wine/Party Dishes (5°C) mode. Initially, the

Cold Drinks mode is selected. The refrigerator

will adjust the temperature in the Flex Zone

automatically to the temperature you selected.

• The Flex Zone Temp. Display may change

depending on the number of items inside, where

they are located, the ambient temperature, and

how often the door is opened.

Temperature

You can select your Flex Zone temperature from

Meat/Fish mode (-1°C), Cold Drinks mode (1°C),

Deli/Snack (3°C), or Wine/Party Dishes (5°C) mode.

Selection Button

1. When “Wine/Party Dishes” is selected, the

temperature of Flex Zone will be kept around 5°C.

This feature helps keep food fresh for a long time.

2. When “Deli/Snack” is selected, the temperature

of Flex Zone will be kept around 3°C. This feature

helps keep food fresh for a longer time.

3. When “Cold Drink” is selected, the temperature

of Flex Zone will be kept around 1°C. This feature

also helps keep drinks cold and refreshing.

4. When “Meat/Fish” is selected, the temperature

of Flex Zone will be kept around -1°C. This

feature also helps keep meat or fish fresh for a

longer time.

CAUTION

DA99-03404F-12.indb 17DA99-03404F-12.indb 17 2015. 4. 25.  10:482015. 4. 25.  10:48

18_ operating

Zone – Open the Flex door to full extension. Tilt the

front of the Flex Zone up, place the back of the Flex

Zone onto the rails, and then lower the front until the

whole Zone rests on the rails.

When the Flex Zone or LED

lighting are not working, check the

connectors [ ( 1 ), ( 2 ) shown below]

for cracks or leaks.

1. Refer to page 9 for disassembly instructions.

2. Open the cover housing with a flat-blade

screwdriver.

USING THE TILTING POCKET

The Tilting Pocket can be used to store up to

a 406mm pizza if you place it as shown in the

illustration.

2. Tempered Glass shelves

To remove - Tilt up the front of the shelf in the

direction shown (1) and lift it up vertically (2). Pull the

shelf out.

To relocate - Tilt the front of the shelf up and guide

the shelf hooks into the slots at a desired height.

Then lower the front of the shelf so that the hooks

can drop into the slots.

The Tempered Glass shelves are heavy. Use

special care when removing them.

3. Vegetable & Fruit Drawers

• After pulling out completely the vegetable pan,

take it out by lifting up the front and pull it

forward.

• To remove the shelf of the vegetable pan, press

the button on the left side of the shelf while you

are lifting it. Pull it out slowly.

Reassemble in the

inverse order of

the disassembly.

The assembly is

completed when you

hear a “Click”.

4. Flex Zone

To remove the Flex Zone

– Pull the Flex door out

to full extension. Lift the

Flex Zone up, pulling it

to your body with both

hands.

To relocate the Flex

CAUTION

Button

Rounded up while pressing

the button

CAUTION

DA99-03404F-12.indb 18DA99-03404F-12.indb 18 2015. 4. 25.  10:482015. 4. 25.  10:48

operating _19

02 OPERATING

CLEANING THE REFRIGERATOR

Do not use Benzene, Thinner or Clorox™ for

cleaning. They may damage the surface of the

appliance and can create a risk of ﬁ re.

Do not spray the refrigerator with water while it is

plugged in, as it may cause an electric shock.

Do not clean the refrigerator with benzene, thinner or

car detergent for risk of ﬁ re.

CHANGING THE INTERIOR

LIGHTS

Do not disassemble or replace the LED type

Lighting. To change the LED Type Lighting

contact Samsung service center or your

authorised Samsung dealer.

If Users randomly exchange the LED lamp by

yourself, this may result in an electric shock or

personal injury.

CHANGING THE WATER FILTER

To reduce risk of water damage to your

property DO NOT use generic brands of water

ﬁ lters in your SAMSUNG Refrigerator.

USE ONLY SAMSUNG BRAND WATER

FILTER.

SAMSUNG will not be legally responsible

for any damage, including, but not limited to

property damage caused by water leakage

from use of a generic water ﬁ lter. SAMSUNG

Refrigerators are designed to work ONLY

WITH SAMSUNG Water Filter.

REMOVING THE FREEZER

ACCESSORIES

1. Tilting Pocket

To remove - Pull the brackets upward until you hear

a clicking sound and remove the pocket

To replace - Hook the ends of the pocket into both

brackets (1) and push down until it locks into place.

2. Auto Pull out Drawer

To remove - Pull the drawer out to full extension. Tilt

up rear of drawer and lift straight out.

To relocate - Place the drawer onto the rails by tilting

it up. Lower the drawer into place until it is horizontal

and slide the drawer in.

3. Freezer Drawer

To remove the freezer drawer - Pull the freezer

drawer out fully. Tilt up the rear of the bin and lift it

out to remove.

To relocate the freezer drawer - Place the bin into

the rail assembly.

You can scratch the side of the bin if you

twist it left or right when disassembling or

re-assembling it.

Do not allow babies or children go inside the

freezer drawer.

They could damage the refrigerator and

seriously injure themselves. Do not sit on the

freezer door. The door may break. Do not

allow children to climb into the freezer drawer.

Do not remove the divider.

If trapped inside, children may become injury

and suffocate to death.

CAUTION

WARNING

CAUTION

WARNING

DA99-03404F-12.indb 19DA99-03404F-12.indb 19 2015. 4. 25.  10:482015. 4. 25.  10:48

20_ operating

• If you are in trouble of inserting the water

filter as high pressure of water, shut off the

water supply valve.

• The locked symbol should be lined up with the

indicator line.

5. press the “Alarm/hold 3 sec for Filter Reset”

button (

(Filter Reset)

) for about

3 seconds to reset the water

filter. The color of indicator (

) changes from red to light

off.

6. If you turned off the water

supply, turn it back on.

For a replacement water ﬁ lter, you can visit

your local home Improvement center or

contact the Samsung Parts distributor.

Be sure the replacement water ﬁ lter has the

SAMSUNG logo on the box and on the water

ﬁ lter.

The Filter light turns red to let you know

when it is time to change your water

ﬁ lter cartridge.

To give you time to get a new ﬁ lter,

the red light comes on just before the

capacity of the current ﬁ lter runs out.

Changing the ﬁ lter on time provides

you with the freshest, cleanest water from your

refrigerator.

1. Shut off the water supply. Then, turn the water

filter ( 1 ) about 1/4 turn, counter-clockwise.

2. Pull the water filter ( 1 ) from the case filter ( 2 ).

• To change the water filter more easily, shut

off the water supply valve.

• Sometimes, it is hard to disassemble the water

filter because impurities in the water cause it to

stick. If you are having difficulties, grip the water

filter firmly and pull it hard.

• When you pull the water filter, a little water can

leak from the opening. This is normal. To minimize

the water leaks, keep the filter cartridge horizontal

when you pull it.

• To prevent overflow, empty the water tray filter (3)

and dry around of case filter (2).

3. Insert the new filter into the filter case (4)

4. Push the filter, and then turn it clockwise until it

locks.

(Red)

DA99-03404F-12.indb 20DA99-03404F-12.indb 20 2015. 4. 25.  10:482015. 4. 25.  10:48

Страница загружается ...

Samsung RFG28MEPN Руководство пользователя

Бренд: Samsung

Модель: RFG28MEPN

Категория: Холодильники с параллельными дверьми (Side-by-Side)

Тип: Руководство пользователя

Скачать PDF

сообщить о нарушении

Samsung RFG28MEPN Руководство пользователя

Samsung RFG28MEPN Руководство пользователя

Похожие модели бренда

Модели других брендов