Hyundai H-CMD2009 Руководство пользователя

МУЛЬТИМЕДИЙНЫЙ DVD-

РЕСИВЕР 2 DIN

С МОТОРИЗОВАННЫМ

7” TFT-ДИСПЛЕЕМ

2 DIN MULTIMEDIA

DVD RECEIVER WITH

MOTORIZED 7” TFT DISPLAY

Руководство по эксплуатации Instruction manual

H-CMD2009

2 3

Table of contents Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read

this manual carefully before connecting, operating and/or adjusting the product and keep

the manual for reference in the future.

14

15

16

17

18

19

Table of contents

Before you start

Utilization of the product

Important safeguards

Installation/Connection

Installation

General notes

Mounting

Detachable control panel

Anti-theft system

Connection

Connection diagram

Using the ISO Connector

ISO connection table

Parking wire connection

Reverse driving cable connection

Illumination wire

Operation

Control elements

Front panel

Inner panel

Remote controller

Changing the battery

General operations

Touch screen

Turning the unit on/off

Reset the unit

Volume control

Setting the sound characteristics

Mute function

Mode selection

Angle setting

AV in jack

Subwoofer

Dual zone function

System setup

Sound page

Display page

RDS and Radio page

2

4

5

6

7

8

9

10

11

12

13

General page

DVD page

System info page

Radio operations

User interface of Radio mode

Band selection

Manual/automatic tuning

Programming tuner stations

Auto memory store/preset scan

RDS background

AF (Alternative frequencies) function

TA (Traffic alarm) function

Program type (PTY)

TV tuner operations

Disc/USB/SD/MMC operations

USB/SD/MMC notes

Insert/Eject disc

Inserting a memory card/USB device

DVD touch interface

VCD touch interface

MP3/DivX/JPEG touch interface

Play/pause

Stop playback

Selecting tracks

Fast forward/rewind

A-B segment repeat

Repeat playback

Intro playback

Goto

Random playback

OSD function

Zooming in/out

PBC function

Changing angle

Selecting audio language

Selecting subtitle language

Selecting sound channel

Menu navigation

ID3 tag function

2 3

Table of contents Table of contents

20

21

22

General information

Handling compact discs

Cleaning discs

Cleaning the unit body

Accessories

Troubleshooting guide

Specification

If you want to dispose this product, do not mix it with general household waste. There is

a separate collection system for used electronic products in accordance with legislation

that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so, you

will ensure that your disposed product undergoes the necessary treatment, recovery and

recycling and thus prevent potential negative effects on the environment and human health.

Utilization of the product

4

Before you start

Important safeguards

• Read carefully through the manual to

familiarize yourself with this unit.

• Keep this manual handy as a reference

for operating procedures and precautions. Do

not allow persons who have not read through

this manual to use this unit.

• “CLASS 1 LASER PRODUCT”

This product contains a laser diode of

higher class than 1. Laser beams from the

optical pickup are dangerous to the eyes. To

ensure continued safety, do not remove any

covers or attempt to gain access to the inside

of the product. Refer all servicing to qualified

personnel.

• Do not allow this unit to come into contact

with liquids. Electrical shock could result. Also,

damage to this unit, smoke, and overheating

could result from contact with liquids or dust.

Protect this unit from moisture.

• Make sure that foreign objects do not get

inside the unit; they may cause malfunctions,

or create safety hazards such as electrical

shock or laser beam exposure.

• The beginning of operation is the moment

of the unit installation. Before use the device

in winter it is recommended to heat up the

passenger compartment during 20 seconds or

to the operation temperature.

• Using the unit with the temperature that

goes beyond the operation temperature greatly

decreases the operation resource of the screen

and other components of the unit and can

result in an outage.

• Disconnect the vehicle’s negative battery

terminal while mounting and connecting the

unit.

• The unit is designed for negative

terminal of the battery, which is connected

to the vehicle metal. Please ensure it before

installation.

• When replacing the fuse, be sure to use

one with an identical amperage rating. Using a

fuse with a higher amperage rating may cause

serious damage to the unit.

• Do not allow the speaker wires to be

shorted together when the unit is switched

on. Otherwise it may overload or burn out the

power amplifier.

• Make sure you disconnect the power

supply and aerial if you will not be using

the system for a long period or during a

thunderstorm.

• Make sure you disconnect the power

supply if the system appears to be working

incorrectly, is making an unusual sound, has

a strange smell, has smoke emitting from it

or liquids have got inside it. Let a qualified

technician check the system.

• Always keep the volume low enough so

that you can hear sounds from outside the

vehicle.

• Should this product fail to operate

properly, contact your dealer or nearest service

center.

5

Installation/Connection

Installation

General notes

• Choose the mounting location where the

unit will not interfere with the normal driving

function of the driver.

• Before finally installing the unit, connect

the wiring and make sure that the unit works

properly.

• Consult with your nearest dealer if

installation requires the drilling of holes or other

modifications of the vehicle.

• Install the unit where it does not get in the

driver’s way and cannot injure the passenger if

there is a sudden stop, like an emergency stop.

• If installation angle exceeds 35° from

horizontal, the unit may not perform properly.

• Avoid installing the unit where it would

be subject to high temperature, such as from

direct sunlight, or from hot air, from the heater,

or where it would be subject to dust, dirt or

excessive vibration.

Mounting

• Remove the mounting sleeve (1) from the

unit.

• Slide the mounting sleeve into the 2-DIN

installation slot provided for the car radio.

• Attach the mounting sleeve by bending the

installation brackets towards the outside with

a screwdriver. The sleeve is properly installed

when it can no longer be pulled out, yet also

keeps from sliding into the installation slot.

• Connect the cable set and the antenna to

the vehicle’s electronics corresponding to the

connection table (see farther).

• Attach the mounting racks to the sides of

the unit, and fix them with the screws as in (2).

• Insert the unit into the mounting sleeve

until the stop (3). The unit then audibly snaps

into the sleeve.

• Fasten the four screws (4) to fix the unit to

the mounting sleeve.

• Place the trim ring (5) over the unit and

the installation is completed. (Some vehicles

may not need a trim ring).

• The device is distinguished by a high

4

6

Installation/Connection

degree of output. During operation, this results

in a strong heat generation. Therefore no

cables or other parts may adjoin the device. If

their insulation melts, there is the risk of a short

circuit or fire.

• Removing: Turn off the device. Remove

the front panel and place it into the protective

case. Clamp off the negative pole of the vehicle

battery for the duration of the disassembly. First

carefully remove the trim ring (5) of the unit, by

slightly pulling it upwards and then towards you.

Now unscrew the four screws as shown in (4).

Remove carefully the unit from the mounting

sleeve and disconnect all wires. Make sure that

no vehicle cable can cause a short circuit after

the device has been unplugged.

Detachable control panel

• To attach the front panel, insert the upper

side of the panel first and make sure the

connection pins slide into the connection slots,

then press the lower part of the panel to the

unit until hear a click.

• Slant the front panel down. Press the

release lock (in the bottom of the front panel)

upward to release the front panel, and then

take out the front panel by pulling it downwards

and then towards you from the bottom. Once

the front panel is removed, the back plate will

close automatically after a few seconds and

the panel status indicator will blink.

The control panel can easily be

damaged by shocks. After removing it, place

it in a protective case and be careful not to

drop it or subject it to strong shocks. The rear

connector that connects the main unit and the

control panel is an extremely important part. Be

careful not to damage it by pressing on it with

fingernails, pens, screwdrivers, etc.

If the control panel is dirty, wipe off the

dirt with soft, dry cloth only. And use a cotton

swab soaked in isopropyl alcohol to clean the

socket on the back of the control panel.

Anti-theft system

The front panel of this unit can be stored in

the included protective case when not in used

and carried away when you leave the vehicle

to deter theft.

Switch off the power of the unit. Detach the

front panel, then put it to the protective case

and take it with you.

7

Installation/Connection

Connection

Connection diagram

Camera

(black wire with yellow head)

Line output rear right

(black wire with red head)

Subwoofer

(black wire with blue head)

Line output rear left

(black wire with white head)

Video out

(black wire with yellow head)

Line output front left

(black wire with white head)

TV antenna

(black wire with black head)

USB cable

Line output front right

(black wire with red head)

Parking wire (brown)

Reverse wire (pink)

Radio antenna

(black wire with black head)

Audio output left

(black wire with white head)

Audio output right

(black wire with red head)

ISO connector

Using the ISO Connector

1. If your car is equipped with the ISO

connector, then connect the ISO connectors as

illustrated.

2. For connections without the ISO

connectors, check the wiring in the vehicle

carefully before connecting, incorrect connection

may cause serious damage to this unit.

Cut the connector, connect the colored leads

of the power cord to the car battery as shown

in the colour code table below for speaker and

power cable connections.

1. 2.

8 9

Installation/Connection Installation/Connection

ISO connection table

Location Function

Connector A Connector B

1 - Rear right (+) - Purple

2 - Rear right (-) - Purple/Black

3 - Front right (+) - Grey

4 Battery +12V/Yellow Front right (-) - Grey/Black

5 Antenna, Amplifier control/Blue Front left (+) - White

6 Illumination/Orange Front left (-) - White/Black

7 Ignition/Red Rear left (+) - Green

8 Ground/Black Rear left (-) - Green/Black

Power antenna wire is intended for

power supply of the antenna and for remote

control of an additional amplifier.

8 9

Installation/Connection Installation/Connection

Parking wire connection

Parking brake lead

Brake light

Car frame

Battery

Brown Wire

If Parking cable is connected to hand brake switch, the video display of the TFT monitor will be

controlled by driving status, system setup and input video sources. When the car is moving ahead,

if the video disc is played, the screen shows “ATTENTION!! You cannot use this function while

driving”, and blank screen. The above warning screen will prevent the driver from watching images.

Reverse driving cable connection

Car frame

Rear view video camera lead

Reverse driving light

Gearbox

Pink wire

Battery

If the rear view video camera is connected, the unit automatically switches to CAMERA source

during reverse driving. The unit returns to the original work mode after the reverse driving is done.

Illumination wire

The illumination wire should be connected to marker lights of the vehicle. The illumination

(backlight) backilght is possible only when the marker lights are switched on.

10

Operation

Control elements

Front panel

1. IR sensor

2. button

3. AV input (on the right side)

4. EJ button

5. VOL- button

6. VOL+ button

7. LCD display

8. TILT button

9. PWR button

10. MODE button

11. button

12. Reset button (hole)

13.

button

14. MENU button

15. DUAL button

Inner panel

1. Memory card lost

2. Panel status indicator

3. Disc slot

1 2

3 4 5 6 7 8 9 10 11 12 13 14 15

1 2 3

11

Operation

Remote controller (RC)

1

2

3

4

5

6

7

8

9

10

16

17

18

19

20

21

22

23

24

25

26

27

28

30

29

31

11

12

13

14

15

1. MODE button

2. POWER button

3. UP cursor button

4. BND/RDM button

5. ENTER button

6. LEFT cursor button

7. DOWN cursor button

8. EJECT button

9. PTY button

10. P.SCN/RPT button

11. SEEK-/ button

12. AF button

13. OSD button

14.

/PBC button

15. Digit buttons

16. button

17. MUTE button

18. MENU button

19. SUB-T button

20. RIGHT cursor button

21. SETUP button

22. ANGLE button

23. INT button

24. VOL+ button

25. A-B/ZOOM button

26. SEL button

27. SEEK+/ button

28. VOL- button

29. AUDIO/GOTO button

30. TILT button

31. DUAL button

Changing the battery

1. Press the catch and at the same time pull

out the battery tray.

2. Insert the 1 lithium battery, type CR2025

(3 V) battery with the stamped (+) mark facing

upward. Insert the battery tray into the remote

controller.

• Store the battery where children

cannot reach. If a child accidentally swallows

the battery, consult a doctor immediately.

• Do not recharge, short, disassemble or

heat the battery or dispose it in a fire.

• Do not expose or bring into contact the

battery with other metallic materials. Doing this

may cause the battery to give off heat, crack or

start a fire.

• When throwing away or saving the battery,

wrap it in tape and insulate; otherwise, the

battery may give off heat, crack or start a fire.

• Please direct the Remote controller to the

IR sensor of the front panel.

12 13

Operation Operation

General operations

Touch screen

Due to the touch screen, you can fulfill most

functions not only by pressing buttons but also

by touching the options you need.

Turning the unit on/off

Press any button (except REL button and

EJECT button) to switch the unit on. Press

and hold POWER button on the panel or PWR

button on the RC to turn off the power.

Reset the unit

Operating the unit for the first time or after

replacing the car battery, you must reset the

unit. Press reset button on the unit with a

pointed object (such as a ballpoint pen) to set

the unit to initial state.

When some errors occur on the display,

you can also press reset button to resume to

normal, and it will erase the clock setting and

some memorized functions.

Volume control

Press VOL+/VOL- buttons on the RC or on

the unit to increase/decrease the sound level.

Setting the sound characteristics

Press SEL button to open the following menu:

1 2 3 4

1. Setting list. Touch a setting to select its

adjustment.

2. Adjustment buttons. Touch them to adjust

corresponding setting.

3. Adjustment slidebar. Touch to adjust a

setting.

4. Equalizer mode selection button. Touch to

go to the mode list.

You can also adjust Equalizer, Bass, Treble,

Balance and Fader by pressing the cursor

buttons on the RC.

Mute function

Press MUTE button on the RC or PWR

button on the unit to turn off the sound. Press

the button again or adjust volume to resume

the sound output.

Mode selection

• Repeatedly press MODE button on the

RC or on the panel to select a mode: Radio =>

Disc => USB => SD => TV => AV-in.

• In any mode touch right top corner of the

screen or press MENU button to display the

Main menu as follows:

In the menu, touch the item of the mode you

need to select the corresponding mode.

The Disc, USB and SD modes are only

available when a disc, USB or SD/MMC card is

inserted into the unit.

Angle setting

Press repeatedly TILT button to adjust the

desired angle of the monitor.

Please do not adjust the monitor tilt

manually, otherwise it can get damaged.

AV in jack

AV jack is intended to receive audio and video

12 13

Operation Operation

signals by connecting to external device.

Subwoofer

Connect a subwoofer to this unit using the

Subwoofer output of this unit. For subwoofer

operation an external amplifier is required.

Dual zone function

DUAL - dual zone function enabling user to

listen to radio or watch TV in the front zone,

and at the same time play audio or video from

disc, USB or memory card.

For Dual zone en external monitor with is

required having its own acoustic system and

possibility of volume adjustment.

Press DUAL button to select between

C-DUAL (buttons perform operations for the

current mode of the front zone) or D-DUAL

(buttons perform DVD functions).

System setup

When you select SETTING mode or press

SETUP button on the RC, the menu will be

displayed, in which you can touch any item to

perform operations as follows:

1 2 3 4

5 6

1. Menu page list. Touch any page icon to go

to corresponding menu page.

2. Setting list. Touch a setting to select its

adjustment.

3. Adjustment buttons.

4. Option selection button. Touch to go to

option list for corresponding setting. Touch an

option to select it.

5. Subpage number.

6. Subpage selection button. Touch to switch

between suppages of each setting list.

You can also navigate in the menu by

pressing cursor buttons on the RC and confirm

your selection by pressing ENTER button on

the RC.

Sound page

• EQ: Select Flat, Classic, Pop, Rock or

User equalizer mode.

• Bass: Adjust the low-frequency level.

• Treble: Adjust the hogh-frequency level.

• Balance: Adjust the balance between left

and right channels.

• Fader: Adjust the balance between front

and left channels.

• Volume: Adjust the sound volume level.

• Beep: Select ALL (beep is heard at any

button pressing), 2ND (beep is heard when a

button is pressed and held) or OFF (no beep).

• Loud: Selecting loudness ON will

emphasize the low frequency output.

• Subwoofer: set the subwoofer on or off.

Display page

• Screen: Select 16:9, 4:3 or FULL screen

modes.

• Backlight: select LOW, MID or HIGH

display backlight level.

RDS and Radio page

• Stereo: Select ON (stereo reception mode)

or OFF (mono reception). When the received

stereo signal is weak, switch to mono mode to

improve the signal. The function is available

only in FM bands.

• Local: Select ON (only local station

reception) or OFF (local and distant station

reception). The function is available only in FM

bands.

• TA volume: Adjust level of TA volume.

• Retune: Long/Short. RETUNE refers to the

time period the unit allows for radio scan when

reception is interrupted. “Short” represents

a time period of 30 seconds and “Long”

14

Operation

represents a time period of 90 seconds.

• PI: Mute/Sound. PI sound refers to the

reception noise when the AF function tries to

scan alternative frequency.

• REG: REG ON (the receiver accepts

regional variants of the tuned station with REG

icon turned on), and REG OFF (the receiver

ignores regional variants).

• Mask: DPI/ALL. During MASK DPI mode,

the unit will mask only the AF which has

different PI, this is the default mode; during

MASK ALL mode, the unit will mask the AF

which has different PI and no RDS signal with

high field strength.

• EON TA: DX/Local. If you want to receive

information from local stations only, select

EON TA Local mode. Otherwise, select EON

TA DX mode.

• TA: Seek/Alarm. In TA SEEK mode, the

unit will seek for traffic announcement program

when TA is pressed; in TA ALARM mode, no

TA/TP is displayed and the alarm is set off.

General page

• Dual: Select ON or OFF the Dual zone

function.

• Key: Use buttons at CURRENT (buttons

perform operations for the current mode of

the front zone) or DVD (buttons perform DVD

functions). This function is available only if ON

is selected for DUAL.

• Tilt angle: Select the monitor tilt angle.

• Tilt IN/OUT: Select the monitor in/out

position.

• Clock display: Select ON (clock is

displayed) or OFF (clock is not displayed).

• Clock hour: select 12-hour or 24-hour

clock display mode.

• Clock setting: A touchable keyboard is

displayed. Input the current time and touch OK

to confirm.

DVD page

• OSD lang: Select on-screen display

language.

• Subtitle lang: Select a DVD subtitle

language.

• Audio lang: select a language of the DVD

audio.

• DVD menu lang: Select a language of the

DVD menu.

• Password: In order to make the Rating

feature work, the password mode must be

turned on. If you want to set the ratings limit,

you will need to enter the default password,

which is 0000, then press ENTER to confirm.

To change the password, enter the Password

change submenu. If you change the password,

the default password 0000 will be void.

• Rating: The Rating control level is for

parents to control playing content and protect

your children from violence and erotic. The

disc, the level of which is higher than the

setting level can not be played.

• TV shape: Select 4:3/PS (the wide-screen

image shows on the full screen, but some part

is cut off, 4:3/LB (the wide-screen image shows

and black bars appear on the top and bottom

of screen, Wide (wide-screen image is shown).

• NTSC/PAL: Select color system NTSC or

PAL.

• Default: Reset to the initial factory settings.

System info page

In this menu you can see the current version

information. Besides, calibration function is

available:

• Calibration: “Carefully press and hold

stylus on the center of the target longer than

1 second” is displayed. Touch and hold the

red cross in each position until it moves to a

different position. After repeating it 4 times,

the calibration of the screen is complete. The

calibration procedure is useful when some

malfunction occur with the touch screen, and it

needs adjustment.

Radio operation

User interface of Radio mode

When the unit is switched to Radio mode,

the below touchable user interface will be

15

Operation

displayed on the display:

1 2 3 4 5 6

7 8 9 10 11 12 13 14 15 16 17

1. PTY button. Touch to enable/disable PTY

function. In the PTY list, touch a program type

to start its search.

2. TA button. Touch to enable/disable TA

function.

3. AF button. Touch to enable/disable AF

function.

4. ST button. Touch to select stereo/mono

reception mode.

5. Current band and frequency.

6. Preset station button. Touch to select the

station. Touch and hold to save the current

frequency under the preset number.

7. LOC button. Touch to select local/distant

station reception.

8. Mute button; touch to switch sound on/off.

9. Volume down button. Touch to decrease

volume.

10. Volume level.

11. Volume up button. Touch to increase

volume.

12. BAND button. Touch to select bands.

13. AS/PS button. Touch to scan all saved

stations in current band. Touch and hold to find

and save 6 availble stations in current band.

14. button. Touch for automatic search of

the nearest station downwards.

15. button. Touch repeatedly to change

frequency step by step downwards.

16.

button. Touch repeatedly to change

frequency step by step upwards.

17.

button. Touch for automatic search of

the nearest station upwards.

Band selection

Press BAND/RDM button on the RC to

switch to the bands in the following order: FM1

- FM2 - FM3 - MW1 - MW2.

Manual/automatic tuning

• Manual tuning: press / buttons on

the panel or SEEK-/

and SEEK+/ on the

RC and hold for 2 seconds to enter the manual

tuning mode. Press these buttons repeatedly to

select a frequency downward or upward step

by step.

• Automatic tuning: press

/ buttons

on the panel or SEEK-/

and SEEK+/ on

the RC, the automatic search will start. It will

play when finds the station.

Programming tuner stations

There are 6 numbered preset buttons on

the RC, with which you can store and recall

stations for each band (18 FM, 12 MW). Select

a station, then press and hold a preset button.

The station will be saved in the memory under

the corresponding number. To recall a stored

station, press the corresponding preset button.

Auto memory store/Preset scan

Auto store: Select a band, press and hold

P.SCN/RPT button on the RC to enter auto

store mode. The radio will automatically store 6

stations to the 6 preset memories of the current

band. To stop auto store, press the button again.

During auto station preset, the unit will

search and store stations with the strong signal

first, and then weaker signal stations until the

memories are full.

Preset scan: Select a band, press P.SCN/

RPT button on the RC to scan all preset

stations in the memories of the current band.

To stop preset scan, press the button again.

RDS background

RDS service availability varies with areas.

Please understand if RDS service is not

16

Operation

page (Auto Program or Manual Program)

press UP/DOWN cursor buttons on the RC or

touch these items on the screen. To enter the

selected page press ENTER button on the RC.

Press UP/DOWN cursor buttons on the RC or

touch the needed item on the screen to select

an item, and then press ENTER button on the

RC or press the item on the screen to adjust

the setting. Touch BACK item on the screen or

press button on the RC or panel to return to

last settings list.

AUTO PROGRAM

• System: select TV system (SECAM/PAL).

• Audio: select sound system (DK/BG/I).

• Search: select to start automatical search

and storing of TV channels.

MANUAL PROGRAM

• Storage: select the storage number of the

channel.

• System: select TV system (SECAM/PAL).

• Audio: select sound system (DK/BG/I).

• Channel: Select the number of the channel.

• Fine: perform fine tuning of picture quality.

• Memory: select on (memorize the found

channel) or off (not memorize).

Disc/USB/SD/MMC operations

USB/SD/MMC notes

USB format supports 1.1. Capacity: up to 8

Gb.

For correct and satisfactory operation,

licensed SD/MMC memory cards of famous

brands should be used with this unit. Avoid

using memory cards of unknown brands.

Capacity: up to 8 Gb.

Insert/Eject disc

• Insert a disc into the disc slot with label

side up. The disc will be automatically loaded

into the unit. The first file in the root folder will

be played.

• Press EJECT button to eject the disc from

the slot. If the disc is not removed from the slot

within several seconds, it will be automatically

available in you area, the following service is

not available.

AF (Alternative frequencies) function

Briefly press AF button on the RC to enable

AF function. When the radio signal strength is

poor, enabling the AF function will allow the unit

to automatically search another station with the

same PI (Program Identification) as the current

station but with stronger signal strength.

AF indicator on the display will flash until

RDS information is received. If RDS service is

not available in your area, turn off the AF mode.

TA (Traffic alarm) function

Touch TA button on the screen to switch on

the TA function. When TA is on, the TA displays

on TFT, or else, if there is no TP information,

the mode will search TP station automatically.

When TA is playing, the volume will be adjusted

to a TA level automatically. When other modes

are activated (such as DVD, AUX), if a TA

program is played the mode will skip to the

RDS mode automatically. It will resume to the

primary mode after the TA is over.

Program type (PTY)

Briefly press PTY button on the RC to

activate PTY function. When PTY is on, you

can press UP/DOWN cursor buttons or number

buttons on the RC to select a program type

to search the special program. When PTY

info is available, press OSD button on the RC

to display such information. If PTY is off, the

searching is stopped.

TV tuner operation

• Connect a TV antenna to the TV antenna

jack of the unit. Select TV mode.

• To access the TV mode menu, press

MODE button on front panel or remote to

select TV mode or tap TV icon on main menu

screen to enter TV mode, then press

button on the RC or panel. To select a menu

17

Operation

loaded into the slot again. When the disc is

ejected and removed, the unit will automatically

switch to another mode.

Inserting an SD/MMC card/USB device

Open the front panel and insert an SD/

MMC memory card into the card slot. Open the

USB slot cover on the front panel and insert

a USB into the USB slot. Then the playing

mode will be changed into Card or USB mode

automatically. The first card/USB device track

playback will start.

When SD/MMC card and USB device are

both inserted, the playing mode will be changed

into the mode of the device inserted later.

DVD touch interface

When a DVD is played, touch the center

of the screen; the screen will show following

interface:

1 2 3

4 5 6 7 8 9 10

1. Disc type

2. Current playback title/chapter/track

number

3. Current playback time

4. STOP button. Touch to stop playback

5. button. Touch repeatedly to change

rewind speed.

6.

button. Touch repeatedly to change

fast forward speed.

7. REPEAT button. Touch repeatedly to

select repeat playback mode.

8. SUBT button. Touch to select disc subtitle

language.

9. AUD button. Touch to select disc audio

language.

10. ROOT button. Touch to go to the disc

root menu.

VCD touch interface

When a VCD is played, touch the center

of the screen; the screen will show following

interface:

1 2 3

4 5 6 7 8 9

1. Disc type

2. Current playback title/chapter/track

number and PBC status

3. Current playback time

4. STOP button. Touch to stop playback

5. button. Touch repeatedly to change

rewind speed.

6. button. Touch repeatedly to change

fast forward speed.

7. REPEAT button. Touch repeatedly to

select repeat playback mode.

8. AUD button. Touch to select audio channel.

9. PBC button. Touch to switch BPC function

on or off.

MP3/DivX/JPEG disc touch interface

When a file disc, USB or a memory card

is played, touch the center of the screen; the

screen will show following interface:

18

Operation

1 2 3 4 5 6

7 8 9 10 11 12 13 14 15 16 17 18

1. RDM button. Touch for random playback.

2. RPT button. Touch to select repeat

playback modes.

3. INT button. Touch for intro playback.

4. Touch the button to go to the previous file

list page.

5. ID3-tag window.

6. File list. Touch the needed file to start its

playback.

7. Touch the button to go to the next file list

page.

8. MDC button. Touch to go to folder selection.

9. Mute button; touch to switch sound on/off.

10. Volume down button. Touch to decrease

volume.

11. Volume level.

12. Volume up button. Touch to increase

volume.

13. STOP button. Touch to stop playback.

14. PLAY/PAUSE button. Touch to pause or

resume playback.

15. Touch the button to go to the previous

file/track.

16. Touch the button repeatedly to select

track rewind speed.

17. Touch the button repeatedly to select

track fast-forward speed.

18. Touch the button to go to the next file/track.

Use cursor buttons to navigate in the

interface and press ENTER button to confirm

your selection.

Manufacturer guarantees regular

playback of licensed discs only. Some AVI files

cannot be played due to their parameters and

recording conditions.

Play/pause

The unit will automatically play from the first

sound track recorded on a disc/SD/MMC/USB

device. To ensure good system performance,

wait until the unit finishes reading the disc/

device information before proceeding. Press

button on the RC or on the panel to pause

playback, press it again to resume playback.

Stop playback

During playback of a disc/USB/SD/MMC

card, press

/PBC button on the RC to stop

the playback. Press

button on the RC or on

the panel to start playback again. Playback will

resume from the point it was stopped at. If you

press

/PBC button on the RC twice, playback

will stop completely and can be resumed only

from the beginning of the disc.

Selecting tracks

During playback press SEEK- button

on the RC or

button on the panel or on

the screen to play the previous track. Press

SEEK+

button on the RC or button

on the panel or on the screen to play the next

track. Press number buttons (0-9) on the RC

to select the desired track/chapter number in

0001 format.

Fast forward/rewind

Press long repeatedly SEEK- or SEEK+

buttons on the RC or press repeatedly

or

buttons on the panel or corresponding

buttons on the screen for fast backward or

forward playing correspondingly. With each

pressing playback speed will increase. While

fast playback, press

button on the RC or on

the panel to resume normal speed.

When fast backward/forward playback

reaches the previous or next track, the unit will

resume normal playback.

A-B segment repeat

Press A-B/ZOOM button to set point A,

19

Operation

press one more time to set point B and start

A-B repeating. Press this button one more time

to cancel the repeating function.

Repeat playback

Press P.SCAN/RPT button repeatedly for

repeat playing in different modes: track/chapter

repeat, folder repeat, disc repeat, repeat cancel

(depending on the format used).

Intro playback

Press INT button on the RC to activate

introduction function. Several initial seconds

of each track will be played. Press the button

again to cancel intro playback.

GOTO

Press and hold AUDIO/GOTO button to

show the playback parameters for the current

chapter/track/time (track/title/chapter number

or time). Press cursor buttons to navigate

between the parameters and use number

buttons to input needed settings. Press ENTER

button on the RC to start playback from the set

number or time.

Random playback

Press BND/RDM button on the RC to

activate random playing mode. Press one more

time to return to normal playing.

OSD setting (for DVD)

Press and hold OSD button to access the

on-screen menu in which you can adjust color

parameters (brightness, contrast etc.) of the

image by touching corresponding item.

Zooming in/out

During playback of video or images on disc/

USB/SD/MMC, press and hold repeatedly A-B/

ZOOM button on the RC, the picture will be

zoomed in the sequence: Zoom2 =>Zoom3

=>Zoom4 =>Zoom1/2 => Zoom1/3 =>

Zoom1/4 => Normal.

PBC (Playback Control) (for VCD only)

This function is only available for the VCD

with PBC function.

Press and hold

/PBC button on the RC to

set PBC on/off; when PBC is off, the screen will

show PBC menu if you switch PBC on. If the

menu consists of a list of titles, you can select a

desired one using number buttons on the RC.

Changing angle (for DVD only)

Press ANGLE button on the RC to playback

images at different camera angles. If a disc

doesn’t support multi-angle playback, this

function will not work.

Selecting audio language (for DVD only)

During DVD playback, press AUDIO/GOTO

button on the RC repeatedly to select the audio

language to listen. This function will not work

if a disc does not support multi-language audio.

Selecting subtitle language (for DVD)

If your DVD disc supports multi-language

subtitle, press SUB-T button on the RC

repeatedly to switch among disc-supported

languages.

Selecting sound channel (for VCD only)

During VCD disc playback press AUDIO/

GOTO button on the RC to select the channel:

Mono L => Mono R => MIX Mono => Stereo.

Menu navigation (for DVD only)

Press and hold MENU button on the RC

to activate the disc menu list on the screen.

Choose the desired item. Press ENTER button

or button on the RC or on the panel or touch

corresponding button on the screen to confirm

the selected item and start playing.

Title and menu are only available if the

disc has these functions.

ID3 Tag function

If a MP3 file has ID3 tag information in the

supported ID3 format, such information will be

displayed on the LCD while playback.

20 21

General information General information

Handling compact discs

• Do not insert anything other than a CD into

the CD loading slot.

• Do not use cracked, chipped, warped, or

otherwise damaged discs as they may cause

skipping or noise damage the player.

• Handle the disc only by the edges (as

shown in the picture). To keep discs clean do

not touch its surface.

• Store discs in their cases when not in use.

• Do not expose discs to direct sunlight,

high humidity, high temperature or dust.

• Prolonged exposure to extreme

temperature (such as leaving the discs in your

car during summertime) can wrap a disc.

• Do not attach labels, write on or apply

chemicals to the surface of the discs.

• Do not touch the recorded surface of the

discs.

• Use 12-cm CDs. Use only conventional,

fully circular discs. Do not use shaped discs.

Cleaning discs

Fingerprints should be carefully wiped from

the surface of disc with a soft cloth. Unlike

conventional records, compact discs have no

grooves to collect dust and macroscopic dirt,

so gently wiping them with a soft cloth should

remove must panicles. Wipe in a straight

motion from the center to the edge.

Never use thinner benzine, record cleaner

or anti static spray on a compact disc. Such

chemicals can damage its plastic surface.

Cleaning the unit body

Wipe with a soft cloth. If the cabinet is very

dampen (not dropping wet) the cloth with a

weak solution of soapy water, and then wipe

clean.

Accessories

1. Receiver 1 pc

2. Front panel 1 pc

3. Protective bag 1 pc

4. Remote controller 1 pc

5. ISO connector 1 pc

6. Audio-video connector 1 pc

7. Mounting parts:

Mounting sleeve 1 pc

Outer trim ring 1 pc

Steel bar 1 pc

Screw B15x6 1 pc

Nut M5 1 pc

Flat washer 1 pc

Spring washer 1 pc

Bolt M5 4 pcs

Release keys 2 pcs

8. Consumer information 1 pc

9. Warranty card 1 pc

10. Instruction manual 1 pc

Страница загружается ...

Hyundai H-CMD2009 Руководство пользователя

Hyundai H-CMD2009 Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов