Elinchrom ELB 1200 Руководство пользователя

Elinchrom LTD – ELB 1200 – 06.2018 – 73048

ELB 1200

USER MANUAL

GEBRAUCHSANLEITUNG

MANUEL D’UTILISATION

MANUALE D’USO

MANUAL DE FUNCIONAMIENTO

MANUAL DO USUÁRIO

GEBRUIKSAANWIJZING

РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ

安全ガイド

用户手册

EN

DE

FR

IT

ES

PT

NL

RU

JP

CN

User Manual

EN

2

User Manual

EN

3

Tolerances and speciﬁcations conforming to IEC and CE standards.

Technical data is subject to change without notice.

INTRODUCTION 2

ELB 1200 CARACTERISTICS 2

TECHNICAL DATA 3

USER SAFETY INFORMATION 4

CONTROL PANEL 6

DISPLAY PANEL – DASHBOARD 7

DEDICATED BUTTONS 8

• MODELLING LAMP

• USER SETTINGS

MENU FEATURES 11

• RADIO TRANSCEIVER FEATURES & SETUP

• FLASH MODE SETUP

• PHOTOCELL SETUP

• EXTRAS

• INFO

TROUBLESHOOTING 17

MAINTENANCE 18

STORAGE AND TRANSPORTATION 19

DISPOSAL AND RECYCLING 19

LEGAL INFORMATION 20

User Manual

EN

4

INTRODUCTION

Dear photographer,

Thank you for buying the ELINCHROM ELB 1200 Unit. All Elinchrom products are

manufactured using the most advanced technology. Carefully selected components

are used to ensure the highest quality and the equipment is submitted to many tests

both during and after manufacture. We trust that it will give you many years of reliable

service.

Please read the instructions carefully before use, for your safety and to obtain maximum

beneﬁt from many features.

Your Elinchrom-Team

Please read carefully the notes in this manual. This manual may show images of

products with accessories, which are not part of sets or single units. Elinchrom set and

single unit conﬁgurations may change without advice and may differ in other countries.

Please ﬁnd actual conﬁgurations at www.elinchrom.com

For further details, upgrades, news and the latest information about the Elinchrom

System, please regularly visit the Elinchrom website. The latest user guides and

technical speciﬁcations can be downloaded in the “Support” area.

Technical data, features and functions of Elinchrom ﬂash units, accessories and the

EL-Skyport system may change without advice. The listed values can differ due to

tolerances in components, or measuring instruments. Technical data, is subject to

change. No guarantee for misprints.

Please keep this user manual for later information and reference.

ELB1200 CARACTERISTICS

2x Outlets A + B with 2:1 (66%:33%) asymmetry and 1:1 (50%:50%) options. LED

illuminated outlets, show which head is active. Each connected head can be activated

or deactivated separately using the A and B buttons. Head recognition, shows if a Pro,

Hi-Sync, Action head is connected. Automatically displays the ﬂash duration of each

(Pro / Action) head at all power levels. Elinchrom Creative Suite with strobo, delayed and

sequence features. USB for ﬁrmware updates.

Two versions of the ELB1200 Battery Pack are available:

• ELB1200 Li-Ion Battery HD 144 Wh (19296)

• ELB1200 Li-Ion Battery Air 90 Wh (19273)

The number of ﬂashes may vary from battery to battery (due to ageing, storage

conditions etc.). Used Batteries may need to be recycled. Check your local regulations!

User Manual

EN

5

TECHNICAL DATA

Product Name and article number

ELB 1200 (10289.1)

Flash capacity (Ws/J)

1200

Power distribution

Asymmetrical 2:1 or symmetrical

F-Stop (1m, 100 ISO, reﬂector 48°) ELB 1200 Pro

100%: 128

F-Stop (1m, 100 ISO, reﬂector 48°) ELB 1200 Action

100%: 90.6

F-Stop (1m, 100 ISO, reﬂector 48°) ELB 1200 Hi-Sync

100%: 128

Power range F-stop

8.5

Power range Ws / J

100%: 14 – 1200 / 50%: 7 - 600

66%: 14 – 791 / 33%: 7 - 396

Power increments in F-Stop

Dial: 1/10 – left/right buttons 1 F-Stop

Best ﬂash duration t0.5 max. power ELB 1200 Action

1/8850 s at 33%, power setting 4.7

Recycling FAST to full power, in s

1.7

Recycling DEFAULT, to full power in s

3

Recycling ECO to full power, in s

6

Color temperature in K° at max. power

5500

Auto Power Dumping

Adjusts power settings automatically

Power stability

+/- 0.03 %

Modelling lamp modes

On, free, prop, timer 1-60 s, VFC, dimmer 5-100%

Flashes out of one charged battery at min / max. power

20000 / 215 (Li-Ion Battery Air, included)

36000 / 400 (Li-Ion Battery HD, optional)

LED run time 1 / 2 heads (set ﬂash power to minimum

value)

Up to 80 / 40 min. (Li-Ion Battery Air, included)

Up to 120 / 60 min. (Li-Ion Battery HD, optional)

Li-Ion Battery Air (included, 19273)

36V / 2.5 Ah / 90 Wh

Li-Ion Battery HD (optional, 19296)

36V / 4.0 Ah / 144 Wh

Battery Box options

USB charge socket for mobile devices: 5V max. 1 Amp., shipping mode

setting, battery charge status with 4 LED’s

Quick Charger: approx. recharge time in h

1.5 (Li-Ion Battery Air, included)

2.5 (Li-Ion Battery HD, optional)

EL-Skyport

Built-in, 20 frequency channels, 4 groups

Sync voltage

5V compatible with all cameras

Sync socket

3.5 mm jack

Dimensions in cm, complete unit including handle &

battery box / without battery box (WxDxH)

18x13x28 / 18x13x22

Dimensions in cm Battery Box (WxDxH)

18x13x7.5

Weight in kg (lbs), without Battery Box

Weight in kg (lbs), complete unit

3.2 (6.8 lbs) (Li-Ion Battery Air, included)

4.3 (9.48 lbs) (Li-Ion Battery HD, optional)

Weight in kg, Battery Box

1.1 (2.4 lbs) (Li-Ion Battery Air, included)

1.5 (3.3 lbs) (Li-Ion Battery HD, optional)

Supplied with

ELB1200, battery box, quick charger, sync cable

User Manual

EN

6

USER SAFETY INFORMATION

• Flash units are powerful light sources. Please be aware of the danger, or

inconvenience, that they may present to some persons and children.

• Keep ﬂash units out of reach of unauthorised persons whenever possible.

• Keep ﬂash units away from children!

• According to safety regulations, we draw your attention to the fact that these

electronic ﬂash units are not designed for outdoor use in excessively damp

or dusty conditions and should not be used after being exposed to sudden

temperature changes causing condensation. The humidity protection conforms to

the norms of IP20.

• Do not use without permission in restricted areas (such as hospitals, laboratories

etc.).

• Do not use near ﬂammable / explosive material. Keep minimum 1m or more

distance to any object. Keep a general distance from other operating units.

• Never ﬂash into the eyes of a subject without warning. Close use, may affect

eyesight.

• The ambient temperature whilst the unit is in use: min. -10°C (14°F) up to max.

40°C (104°F)

• There is high voltage and there can be high currents, so please apply all the usual

safety precautions when handling the unit.

• Flash systems store electrical energy in capacitors by applying high voltage,

please take care of open contacts and terminals.

• These units may retain an internal charge for a considerable time even though

disconnected. If it has been found to be faulty, please stop using it and return it for

repair.

• For your safety, never open or disassemble your ﬂashes. Only an authorised

service engineer should open or attempt to repair this unit.

• Always switch off the ﬂash unit before changing accessories.

• The unit, the ﬂashtube and accessories may become very hot during and after

use! To avoid injury, handle with an insulating cloth or wait until parts have cooled

down. Avoid direct sunlight, which might heat up the ﬂash unit and affect the

photocell efﬁciency. Protect the ﬂash unit when used in humid conditions, but

ensure ventilation for cooling! On no account should any object be inserted into the

ventilation holes.

• Use only original Elinchrom Accessories. Damaged cables, glass domes and cases

must be immediately replaced by customer service.

FLASH TUBES AND LED-MODELLING LIGHT

• Flashtubes and the LED-Reﬂector dishes may become very hot during and after

use!

• Never touch a ﬂash tube or exchange it before the unit has cooled down and is

disconnected from the power.

• Do not ﬁre ﬂashes from short distances directed towards a person.

• Do not use near ﬂammable / explosive material.

User Manual

EN

7

WARNING: PHOTOSENSITIVITY/EPILEPSY/SEIZURES

A very small percentage of individuals may experience epileptic seizures or blackouts

when exposed to certain light patterns or ﬂashing lights. Exposure to certain patterns

or stroboscopic effects may trigger epileptic seizures or blackouts in these individuals.

These conditions may trigger previously undetected epileptic symptoms or seizures

in persons who have no history of prior seizures or epilepsy. If you, or anyone in your

family, has an epileptic condition or has had seizures of any kind, consult your physician

before using the EL unit. IMMEDIATELY DISCONTINUE use and consult your physician

before resuming use of your EL unit if you or your child experience any of the following

health problems or symptoms:

• Dizziness

• Eye or muscle twitches

• Disorientation

• Any involuntary movement

• Altered vision

• Loss of awareness

• Seizures or convulsion

User Manual

EN

8

CONTROL PANEL

CONTROL PANEL FEATURES THE FOLLOWING

1. Outlet A

2. Outlet B

3. Outlet A on/off (located under the handle)

4. Power ratio between the outlets A and B

(66% : 33% or 50% : 50%), located under

the handle

5. Outlet B on/off (located under the handle)

6. Unit On /Off

7. Menu Access Button / Menu navigation

function

8. Left function button / Menu navigation

function / Power down by 1 F-stop

9. Scroll button (Menu navigation function ) /

Flash test (push) / power variation in 1/10th

10. Right function button / Menu navigation

function / Power up by 1 F-stop

11. LED Modelling Lamp Button : short push

(on/off) / long push (settings)

12. User setting button, toggle between

advanced and reduced display information

13. OLED Display

9 10

2

3

6

7

4

1

8

5

12

13

11

User Manual

EN

9

1. EL-Skyport synchronisation (normal or speed

sync mode)

2. EL-Skyport frequency channel and group

number

3. Photocell status

4. Modelling Lamp status

5. Battery charge status

6. Power outlet B / power ratio / head type

7. Power setting of the B outlet in f-stop

equivalents

8. Flash Duration value of the B outlet

9. Increase ﬂash power by 1 f-stop (Effect of

function buttons)

10. Decrease ﬂash power by 1 f-stop (Effect of

function buttons)

11. Flash Duration value of the A outlet

12. Power setting of the A outlet in f-stop

equivalents

13. Power outlet A / power ratio / head type

DISPLAY PANEL – DASHBOARD

The main dashboard displays a simpliﬁed view of one or two head settings.

The colours of the upper bar correspond to the group number : blue for the group 1, yellow for the group

2, red for the group 3 and green for the group 4. It is possible to switch between black or white menu

background colour.

The dashboard changes automatically between one and two heads view depending on the number of heads

switched on. Settings that are enabled are displayed on the dashboard. For example, if the modelling lamp is

switched on, the modelling lamp symbol will appear on the dashboard.

THE TWO HEAD VIEW DASHBOARD INCLUDE THE FOLLOWING FEATURES

1 2 3 4 5

6

7

811

12

13

910

One head view Two head view

User Manual

EN

10

DEDICATED BUTTONS

LED MODELLING LAMP BUTTON

• A short press on the modelling lamp button turns on the LED lamp of the ELB 1200 Head

for 15 seconds. Values can be changed from 1 to 60 seconds.

• A long press on the pilot lamp button opens the modelling lamp setup menu.

MODELLING LAMP SETUP MENU

Modelling lamp power value, timer settings and

the VFC function are accessible through the

Modelling Lamp Menu.

• Use A & B buttons to set modelling lamp

power values in the asymmetrical way.

• Ratio setting is accessible through the

button (A:B)

MODELLING LAMP SETTINGS MENU

MENU OPTIONS EXPLANATION HOW TO

Mode Free or

proportional

Switch between the free

and the proportional

modelling lamp power

setting

1. Press the Left Function button to enter

the menu.

2. Use the scroll button to set

proportional or free.

3. Conﬁrm by pressing the scroll button.

Free The power value of

the modelling lamp is

independent of the ﬂash

power value

1. Use Left Function button to leave the

menu

2. Use the scroll button to set the LED

power value, press to conﬁrm.

Proportional The power value of

the modelling lamp is

proportional to the ﬂash

power value

Fixed value.

Mode passes to FREE automatically if

the power settings are changed via the

scroll button.

VCF On/Off LED switches off, when

unit recharges. Optical

ﬂash conﬁrmation.

1. Press Left Function button to enter

the menu

2. Use the scroll button to toggle to

VFC.

3. Conﬁrm by pressing the scroll

button.

Timer On/Off

• 1. Press Left Function button to

enter the menu

• 2. Use the scroll button to toggle

to Timer On/Off.

• 3. Conﬁrm by pressing the scroll

button.

• 4. Use the scroll button to set the

value 5 – 60 s, press to conﬁrm.

Timer value Modelling lamp timer,

5 – 60 s

exit To exit this menu, press the Right

Function button

User Manual

EN

11

USER SETTINGS BUTTON

The User Settings button displays the advanced menu. If two heads are attached, the display

adapts automatically. In this case, the central part of the dashboard displays the total power of

the two heads, in f-stop equivalents and in Joules.

The one head view displays the following features:

1 2 3 4 5 6

7

8

91011

12

13

ONE HEAD VIEW

1. EL-Skyport synchronisation (normal or

speed sync mode)

2. EL-Skyport frequency channel and group

number

3. Photocell status

4. Modelling Lamp status

5. Charge speed (fast / eco / in default mode

no info displayed)

6. Battery charge status

7. Flash power in f-stop equivalents

8. Flash mode settings (normal, sequence,

delayed, strobo)

9. Increase ﬂash power by 1 f-stop

10. Modelling lamp status, when modelling

lamp is switched on

11. Decrease ﬂash power by 1 f-stop

12. Flash power in Joules / Ws & ﬂash duration

value (only displayed with Action and Pro

Heads)

13. Power outlet / power ratio / head type

User Manual

EN

12

1. EL-Skyport synchronisation (normal or

speed sync mode)

2. EL-Skyport frequency channel and group

number

3. Photocell status

4. Modelling Lamp status

5. Charge speed (fast / eco)**

6. Battery charge status

7. Power outlet B / power ratio / head type

8. Power setting of the B outlet in f-stop

equivalents and in Joules (Ws)

9. Flash Duration value of the B outlet*

10. Increase ﬂash power by 1 f-stop

11. Total ﬂash power of the two heads, in f-stop

equivalents and in Joules (Ws)

12. Flash mode settings (normal, sequence,

delayed, strobo)

13. Decrease ﬂash power by 1 f-stop

14. Flash duration value of the A outlet*

15. Power setting of the A outlet in f-stop

equivalents and in Joules / Ws

16. Power outlet A / power ratio / head type

531 642

16

15

14

1213 1011

7

8

9

TWO HEAD VIEW

*Displayed with Action and Pro heads

** In default mode no info displayed

User Manual

EN

13

1

3

21

2

6

5

4

1. Menu selected

2. Selected menu options

3. Menu option settings

4. Exit menu navigation

5. Scroll button functions:

• Scroll to modify settings

• Press to conﬁrm menu settings or enter

the menu option (select function)

6. Backward menu navigation

MENU FEATURES

DISPLAY PANEL – SETUP MENU

The colors of the setup menu correspond to the group number setting, as in the main dashboard: blue is

group 1, yellow is group 2, red is group 3 and green is group 4.

It is possible to switch between black or white menu background colour, press long on the user button, but

leave the menu before.

To navigate in the menu, scroll with the scroll button and press to select.

User Manual

EN

14

When you work with the EL-Skyport Radio system you can choose the synchronization

speed. The “normal” synchronization mode is good when long distances are needed whereas

the “speed” synchronisation can be used when higher shutter sync speeds are needed, with

enabled medium format cameras. Any change in these settings must be applied also to the

EL-Skyport Radio Transmitter to enable communication between the devices! Normal sync

mode is the standard sync mode.

Finally you can choose in which group and frequency you would like to work. Change group

settings to have independent control multiple groups of lights. Change frequency channel to

avoid interference.

DISPLAY OPTION OPTION SETTINGS DEFAULT SETTING

Radio Mode Normal / Speed Normal

Group 1 to 4 1

Frequency (channel) 1 to 20 1

FLASH MODE SETUP

The ﬂash mode menu enables you to conﬁgure your ELB unit to suit your style of shooting.

RADIO TRANSCEIVER FEATURES & SETUP

The Radio options allow you to select the synchronisation speed and to deﬁne group and

frequency settings.

User Manual

EN

15

To set the delay step to x 1, x 10 or x 100 steps press the button

The ﬂash before ready feature gives you the choice between ﬂashing the unit before full recycle

or to be able to ﬂash only when the unit has fully recycled. You can also deﬁne recycling time

depending on the battery level left.

DISPLAY OPTION SUB- OPTION SUB-OPTION SETTINGS DEFAULT

SETTING

Flash

mode

Recycling time Eco / default

/ fast

Yes/no Default

Flash before

ready

Yes/no

Mode Normal /

Sequence

/ Delayed /

Strobo

Normal

Sequence Unit address 1 - 20 1

Sequence Total units 1 to 20 1

Sequence Sequence timeout 0.1’’-5.0’’ 2.0’’

Delayed Delay Steps: x1,

x10, x100

100 ms

Strobo Hz 1 - 20 1

Strobo Duration 0.5 – 5.0 s 2.0 s

Stay on default if you wish to do normal ﬂash photography.

SEQUENCE SETUP

Use sequence mode to catch a moving sequence in a series of single frames with a number

of indexed ﬂash units, for example, of a jumping person in up to 20 different images. The

following setup must be programmed in order to use the features.

Unit address : Every unit requires its own address; every time a trigger is released the

corresponding ﬂash unit will respond. Up to 20 units can be addressed.

Total units : Indicates the total number of addressed ﬂash units.

Sequence timeout : Time after which the sequence restarts back to ﬁrst addressed unit.

The timeout can be programmed from 0.1s to 5s. This setting is the wait time after a sequence

is stopped, before it will restart from the beginning of the sequence.

DELAY SETUP

Set a delay for your ELB unit to ﬂash with the set delay after triggering (e.g. second curtain).

The delay refers to the time (in ms) in which the unit should ﬁre a ﬂash after the camera

shutter has been opened. The delay time can be programmed from 1ms (0.001 s.) to 10000ms

(10 s.), enabling ﬂash to be combined with ambient light sources.

User Manual

EN

16

To ﬁne-tune the milliseconds, the scale can be modiﬁed in 1, 10, and 100 steps. Press the

press the right function button to choose your step. This option is only active in the ﬂash delay

setup menu.

SUGGESTED VALUE TO SET ON THE ELB IN DELAYED MODE*

SYNC SPEED ON CAMERA EQUIVALENT IN MS SUGGESTED VALUE

1/60 16.6 9

1/50 20 12

1/40 25 17

1/30 33.3 23

1/25 40 30

1/20 50 40

1/15 66.6 52

1/13 77 68

1/10 100 90

1/8 125 115

1/6 166.6 145

1/5 200 185

1/4 250 235

0.3" 300 290

0.4" 400 370

0.5" 500 470

0.6" 600 580

0.8" 800 750

1" 1000 950

1.3" 1300 1200

1.6" 1600 1500

2" 2000 1900

2.5" 2500 2400

3.2" 3200 2900

4" 4000 3800

5" 5000 4800

6" 6000 5800

8" 8000 7700

10" 10000 9700

* tested with canon EOS 5D. Suggested for fullframe camera.

User Manual

EN

17

SUGGESTED VALUE TO SET ON THE ELB IN DELAYED MODE*

SYNC SPEED ON CAMERA EQUIVALENT IN MS SUGGESTED VALUE

1/60 16.6 9

1/50 20 12

1/40 25 17

1/30 33.3 23

1/25 40 30

1/20 50 40

1/15 66.6 52

1/13 77 68

1/10 100 90

1/8 125 115

1/6 166.6 145

1/5 200 185

1/4 250 235

0.3" 300 290

0.4" 400 370

0.5" 500 470

0.6" 600 580

0.8" 800 750

1" 1000 950

1.3" 1300 1200

1.6" 1600 1500

2" 2000 1900

2.5" 2500 2400

3.2" 3200 2900

4" 4000 3800

5" 5000 4800

6" 6000 5800

8" 8000 7700

10" 10000 9700

* tested with canon EOS 5D. Suggested for fullframe camera.

STROBO SETUP

Take an image with stroboscopic effects and open camera shutter. The overlapping moving

sequence is visible in one frame.

• Frequency Hz: Number of ﬂashes per second. Programmable from 1 to 20Hz.

• Duration window: Time during of the moving sequence you wish to capture. Programmable

from 0.5 s. to 5 s.

Note: The unit must be set in fast recycling time in the “power settings” menu. If the error sound

is heard, this means the recycling time cannot keep up. Please reduce the Hz setting or the ﬂash

power to a lower value.

The photocell options allow you to set up the optical ﬂash trigger to off, on and if required, the

pre-ﬂash options for the perfect synchronisation with speedlight preﬂash sequences.

PHOTOCELL SETUP

DISPLAY OPTION OPTION SETTINGS NOTE

Photocell Mode Off / On / Preﬂash

Setup Auto Only accessible in « preﬂash mode »

Use the scroll button, go to Auto

mode and select this (suggested to

automatically count the number of

ﬂashes when the speedlight is ﬁred

at the photocell, and set the correct

number.)

Preﬂash cnt

(only experienced

users)

Manual / 1-20 Only accessible in « manual setup »

Use this option only if you know the

number of pre-ﬂashes the speedlight

ﬁres, plus the main ﬂash.

Time frame

(only experienced

users)

0.5 ‘’-5.0’’ Only accessible in « manual setup »

Block time

(only experienced

users)

0.5 ms – 5.0 ms Only accessible in « manual setup »

User Manual

EN

18

DISPLAY OPTION SETTINGS

Extras Auto std-by off / 1 min – 60 min

Auto - off off / 1 min – 60 min

Ready tone Tone 1 to 12

Ready volume Off/min/low/default/high/max

Error volume

Keyboard click

When the photocell is on, the ﬂash unit will trigger at any recognised ﬂash impulse.

The pre-ﬂash option can be adjusted manually if the number of pre-ﬂashes of the speedlight is

known.

MANUAL PRE-FLASH SETUP (ONLY EXPERIENCED USERS)

In some cases depending on the technology of the speedlite unit, the automatic pre-ﬂash

detection may not work. In this case you can try a manual setup.

• Preﬂash cnt : set up the number of pre-ﬂashes from 1 to 20 and add the main ﬂash.

• Time frame : set the time window in which all pre-ﬂashes, including the main ﬂash, are ﬁred

• Block time: set the delay between each pre-ﬂash from 0.5 to 5 ms.

Note: we cannot suggest any values or setting here; this depends on the speedlite unit and must

be tested until the correct synchronisation between the ﬂash unit and the speedlite is achieved.

The settings in “Extras” help you deﬁne standby and when to auto-off to save energy.

The audio options give you the choice of different settings for ready, error and keytones.

The volume of the ready, error and key tones can be adjusted, enabling you to work silently

if necessary. The ready tone can be chosen to improve acoustical recognition of when all

ﬂashes have ﬁred and recycled.

EXTRAS

User Manual

EN

19

See Error Table

TROUBLESHOOTING

SOFT RESET

To reset all settings to default values, push the left and right ( function ) buttons at the same

time and hold for at least 1 second. The unit will reboot and will clear all working parameters.

This will not reset the counter in the “Info” menu.

ERROR MANAGEMENT

System Error

See Error Table

INFO

Check lifetime of the unit and the ﬂashtube.

You can easily check the current usage of the unit and the ﬂashtube. Very useful for servicing,

rental or second-hand retail.

See Error Table

User Manual

EN

20

ERROR NUMBER DESRIPTION SOLUTION

-1 Capacitors over voltage Restart -> Service

-2 System overheat Wait until cooling down

-3 Discharge circuit fault Restart -> Service

-4 Charge Timeout Restart -> Service

-9 No input voltage on SMPS ! Restart -> Service

-15 Charge MOS thermistor open Restart -> Service

-18 Discharge MOS thermistor open Restart -> Service

-19 capacitor thermistor open Restart -> Service

-24 Capacitor voltage symmetry error OFF 10 min. Restart ->

Service

-26 Booster voltage error Restart -> Service

-28 Tube hanged Restart -> Service

-60 System peripheral bus error Restart -> Service

-62 System memory error Restart -> Service

-99 Uncategorized error Restart -> Service

-101 low battery level Warning

MAINTENANCE

The head requires only very little maintenance. To ensure secure operation please check the

following points regularly before connecting the head to the power pack:

Ensure that the contacts of the ﬂashhead connector are clean and undamaged.

The ﬂash cable should not have any marks or cuts. Important!!

Ensure that the plug-in ﬂash tube and the glass dome are correctly ﬁtted.

CAUTION!

Under no circumstances open any part of the equipment. The ELB 1200 unit is not user

serviceable and contains high voltage. In the event of difﬁculties contact your Elinchrom Service

partner.

REGULAR CHECK

National safety regulations require frequent safety checks of the electrical equipment. The ELB

1200 unit should be checked once a year. This check not only guarantees safety; it also protects

the value of the unit.

SHIPPING

To achieve maximum protection of the unit when sending it in for service, the original packaging

should be kept.

SALES / SERVICE / RENTAL

For service and sales, please contact your local ELINCHROM Distributor. For contact and

support, please visit http://www.elinchrom.com/support.php

Страница загружается...

Elinchrom ELB 1200, ELB 1200 - Unit Руководство пользователя

Похожие модели бренда

Модели других брендов