注：英文在前，俄文在后。
00R
72-I512SI-XAPAA
0D2900A
25
7-KD290N2P-UR0E
0D2900AS
FQ13276O
SI512SP1-AP
P
E
A5
P S PAPER
0
T
CL多媒体科技控股有限公司
制造中心 - 惠州TV工厂 - PE 部
产 品 辅 助设计室（外销订单）
RUSSIA
客供俄文，请已业务
签名确认为准。
LED49D2900S
LED55D2900S
LED40D2900AS
Table of Contents
2
Chapter 1: Introduction
Chapter 2: General Operation
Chapter 3: Advanced Functions
Chapter 4: Other Information
15
3
3
3
3
3
3
3
3
4
4
6
7
7
8
8
8
8
9
9
9
9
9
10
10
11
11
11
12
12
13
Precautions .........................................................................................................................................
Product .............................................................................................................................................
Power and Plug .................................................................................................................................
Power Cord and Signal Cable ...........................................................................................................
Use Environment ...............................................................................................................................
Cleaning ............................................................................................................................................
Hanging the TV Set on the Wall ........................................................................................................
........................................................................................................................
...............................................................................................................................
Sockets ................................................................................................................................................
Remote Control Functions .................................................................................................................
Important Information
Buttons on the TV
Switching on ........................................................................................................................................
Switching off .......................................................................................................................................
..................................................................................................................................
Using Menu System ............................................................................................................................
Auto Scan ............................................................................................................................................
Automatic Update ...............................................................................................................................
...........................................................................................................................
...............................................................................................................
Satellite Manual Installation ...............................................................................................................
Cable Manual Installation ...................................................................................................................
Channel Edit.........................................................................................................................................
First Time Setup
Analog Manual Scan
Antenna Manual Installation
Adjusting the Picture ..........................................................................................................................
Adjusting the Sound ...........................................................................................................................
Selecting a Signal Source... ................................................................................................................
......................................................................................................................
Setup
Using the Lock System..
.....................................................................................................................................................
Time Settings .........................................................................................................................................
Troubleshooting ..................................................................................................................................
USB Functions..............................................................................................................
PVR..............................................................................................................................
15
Base Installation ..................................................................................................................................
Introduction
3
Chapter 1
Precautions
Product
Read all of the instructions before operating the set.
Keep these instructions well for future use.
Do not block or cover the ventilation openings on the
back cover.
Cleaning
Dust the set by wiping the screen and the cabinet with
a soft, clean cloth or some special liquid cleaner.
Unplug the set under the following conditions:
Power and Plug
Do not allow anything to rest on or roll over the power
cord and the signal cable.
Power Cord and Signal Cable
Hanging the TV Set on the Wall
Warning: This operation requires two people.
Do not push objects of any kind into this unit through
the cabinet slots as they could touch current carrying
parts or short-circuit parts, resulting in fire, electric
shock, or damage to the unit.
Do not attempt to open the cabinet
. There are no parts inside you can service by
yourself. Refer all servicing to qualified personnel.
as this may cause
damage
Do not touch the screen surface with fingers as this
may scratch or mark the TV screen.
Do not impact the TV screen with hard pressure as
this may damage the TV screen severely.
The appliance is not intended for use by young children
or infirm persons without supervision. Young children
should be supervised to ensure that they do not play
with the appliance.
- If the set will not be used for a long period of time.
- If the power cord or the power outlet/plug is damaged.
- Follow the instructions to install and adjust the
product. Adjust those controls that are covered in
these operating instructions as improper adjustment
of other controls may result in damage. If this
happens, unplug the set and refer to the service
personnel.
- If the set is subject to impact or has been dropped to
have the cabinet damaged.
Where the mains plug or an appliance coupler is
used as disconnect device, the disconnect device
shall remain readily operable.
Protect the power cord and the signal cable from being
trampled.
Do not overload the power cord or the power outlet.
Do not expose the power cord and the signal cable to
moisture.
Do not place the set on an unstable cart, stand, or table.
Use Environment
Place the set on a place that allows good ventilation.
Do not use the set near damp, and cold areas. Protect
the set from overheating.
Keep the set away from direct sunlight.
The set shall not be exposed to dripps or splashes
and no objects filled with liquids, such as vases, shall be
placed on the set.
Do not use the set in dusty environments.
Do not apply excessive force to the screen when
cleaning.
Do not use water or other chemical cleaners to clean the
screen as this may damage the surface of the TV
screen.
Check that the wall can support the weight of the TV
set and wall mount assembly.
All other safety instructions about our TV sets are also
applicable here. Wall Mount Bracket not included.
Follow the mounting instructions provided with the wall
mount.
The TV set must be installed on a vertical wall.
Make sure to use only screws suitable for the material
of the wall.
Make sure that the TV set cables are placed so that
there is not danger of tripping over them.
To ensure a safe installation, observe the following safety
notes:
Important Information
Using cabinets or stands recommended by the
manufacturer of the television.
If a television is not positioned in a sufficiently stable
location, it can be potentially hazardous due to falling.
Many injuries, particularly to children, can be avoided by
taking simple precautions such as:
Note: Graphics contained within this publication
are presentation only.
Only using furniture that can safely support the television.
Ensuring the television is not overhanging the edge of
the supporting furniture.
Not placing the television on tall furniture (for example,
cupboards or bookcases) without anchoring both the
furniture and the television to a suitable support.
Not standing the televisions on cloth or other materials
placed between the television and supporting furniture.
Educating children about the dangers of climbing on
furniture to reach the television or its controls.
Operating Temperature: 5℃ to 45℃(41°F to 113°F)
Operating Humidity: 20% to 80%, non-condensing
Storage Temperature: -15℃ to 45℃(5°F to 113°F)
Storage Humidity: 10% to 90%, non-condensing
Introduction
Buttons on the TV
4
Sockets
Note: the location and names of the sockets on the TV may vary according to
TV model, and not all sockets available on all models.
EARPHONE socket (output)
The EARPHONE socket can be used to connect a compatible audio receiver.
The HDMI can be used to connect a
blu ray, PC with a compatible video card installed, certain DVD players or a
high-definition compatible digital satellite decoder. This socket p
(High-Definition Multimedia Interface) socket
rovides an
uncompressed digital connection that carries both video and audio data by way of
an integrated mini-plug cable.
HDMI 2
Or
HDMI 1 or HDMI 2 socket (input)
HDMI 1
Take a certain model for an example:
SPDIF
SPDIF socket (output)
The SPDIF socket can be used to connect a compatible digital audio receiver.
1. button /
2
. button
Increases/decreases the volume. In function system, press to select function accordingly.
Turns the TV on or standby. The TV is on, press , brings up function system to select Source, Channel and
Volume. (Only in ATV or DTV mode, Channel can be selected.) , Long press it, TV will be standby.
button
Introduction
5
ANTENNA IN
ANTENNA IN socket (input)
This socket can be used to connect the outside aerial or cable network.
USB socket (input)
These sockets can be used to connect an USB 2.0 device.
Note: the number of USB sockets on the TV may vary according to TV model.
USB
C I
CI socket
This CI socket can be used to put the CI card in to accept the locked programs .
AC IN~
AC In socket (input)
This socket can be used to connect a . AC supply
SATELLITE IN
SATELLITE IN socket (input)
This socket can be used to connect the satellite receiver pot.
VGA socket (input)
This socket can be used to connect a computer.
VGA
YPbPr/VIDEO component sockets (input)
Y/VIDEO
Pb/Cb
Pr/Cr
AV/COMPONENT
IN
These Y/VIDEO sockets can be used to connect a device that has component video
sockets, such as a DVD player. The component sockets can recognize if the device
you're connecting to is Y Pb Pr compatible or Y Cb Cr compatible. The component
sockets provide excellent picture quality because the video is separated into three
separate parts.
R
L
PC/AV/COMPONENT
AUDIO IN
PC/ COMPONENT AV/ AUDIO IN
These AUDIO IN L & R sockets can be used to connect a range of equipment,
including video recorders, camcorders, satellite receivers, DVD players, or games
consoles. AUDIO IN sockets are shared by AV, VGA and YPbPr sockets.
Note: The VGA is same as the PC .
1、Do not mix old and new batteries or different types.
2、When the batteries are to be exhausted, the leakage may occur
and cause the damage to the remote.
3、If the device is not to be used for a long period of time, remove the
batteries to avoid battery leakage.
4、WARNING:The batteries shall not be exposed to excessive heat
such as sunshine, fire or the like.
NOTES
Enters the PVR Settings.
To open the corresponding submenu and activate a setting menus.
s
ECO
Press to enter Time Shift menu. (only available in DTV mode)
Press to start PVR directly.
No Function
Press to stop PVR.
7
Chapter 2
General Operation
Switching on
Follow the instructions on this page on how to switch on your TV set and the remote
control before going on to following pages describing how to use the channel set-up
procedure.
1. Insert two AAA batteries in the remote control.
Precautions on using batteries:
- Only use the battery types specified.
- Make sure you use the correct polarity.
- Do not mix new and used batteries.
- Do not use rechargeable batteries.
-
- Remove the batteries from the remote control if you are not using it for a long
period of time.
Do not expose batteries to excessive heat such as sunshine, fire or the like,
throw them in a fire, recharge them or try to open them, as this could cause
them to leak or explode.
3. Connect an outside aerial to the ANTENNA IN or SATELLITE IN socket at the back
of the TV set.
The aerial socket (75 OHM - VHF / UHF / cable) can be used for connecting
an external aerial or other equipment fitted.
4. When powered on, the TV will be turned on directly or be in standby mode.
If the TV set is in standby mode, press the button on the remote control or
on the TV set to turn on the TV.
2. Connect the power cable FIRST to the television, THEN to a mains socket.
Your TV set should only be connected to an AC supply. It must not be connected
to a DC supply. If the plug is detached from the cable, do not, under any
circumstances, connect it to a mains socket, as there is a risk of electric shock.
Note: the figures are for representation only. The location of the power socket at
the back of the television might differ depending on the model.
Switching off
To put the TV set into standby mode, press the button on the remote control
or on the TV, the TV set remains powered up, but with low energy consumption.
To switch off the TV set, unplug the mains socket from the mains outlet.
General Operation
First Time Setup involves selecting all the settings
required to be able to search for and store all the
channels you can receive. Make sure that the television
is switched on and follow all the steps in turn specified
hereafter.
The first time you switch the set on, the First Time Setup
wizard opens, which guides you through the initial setup
process.
Press the up or down direction button to select Auto
Scan and press the OK or right direction button to
start the search automatically. All available TV
programmes are stored. This operation takes a few
minutes. The display shows the progress of the search
and the number of programs found.
Note: to prevent the channel setup process from being
interrupted, wait for the message indicating that the
setup is completed.
In this step, you can also select Exit to skip the
channel search progress. But when you turn the TV on
next time, the prompt on the screen will remind you to
do the channel scan first.
Note: the Store mode does not satisfy the MEPS
certification, suggest selecting Home.
First Time Setup
2. Press the left or right direction buttons to select the
desired item, then press the OK button to open the
corresponding submenu.
3. In submenus, use the up or down direction button to
select menu options, use the left or right direction button
to set functions or change values. Use the OK button
to activate a setting. Use the OK or right direction button
to open the corresponding submenu.
4. Press Menu to return to the previous menu or press
Exit to close the menu.
Using Menu System
This section explores the menus of your TV. Each menu
is outlined and detailed to help you get the most from
your TV.
8
To access the menu system:
1. Press the Menu button to display the main menu.
1.
select Channel>Tuner Type(Satellite, Antenna, Cable),
then press the left or right direction button to select the
tuner type.
2.Select Auto Scan, then press the OK or right
direction button to enter.
3. Select DTV & ATV (or DTV or ATV),
then press the up/down direction button to highlight the
Start, press the OK or right direction button to start the
automatic search process.
The search may take a few minutes. During the
process, you can press Menu or Exit to abort halfway.
Press the Menu button to display the main menu, and
Auto Scan
This option allows the TV to search for, find and store all
the available analog and digital channels.
Follow all the steps in turn specified hereafter.
This allows you to update all available channels, without
altering the sorting of existing channels. (only available in
DTV mode)
1. Display the Channel menu, press the up or
down direction button to highlight Auto Channel
Update option.
2. Press the left or right direction button to select On/Off
to update the channel.
Automatic Update
First Time Setup
Auto Scan
Hue
General Operation
Analog Manual Scan
1.
direction button to highlight manual scan, press the
OK or right direction button to enter. Then press the
up or down direction button to highlight Analog
Manual scan. Press the OK or right direction button
to enter.
2. Press the up/down/left/right direction and number
button to set, then press the up or down direction
button to highlight Start. Press the OK or right
direction button to search.
3. Press Menu to return to the previous menu or press
Exit to close the menu.
Display the Channel menu, press the up or down
Antenna Manual Installation
Allows you to start manual searching the available
channels from the current frequency or any frequency
you input.(Only for digital channels)
1. Display the Channel menu, press the up or down
direction button to highlight Manual Scan, press the
OK or right direction button to enter. Press the up or
down direction button to highlight Digital Manual
Scan, press the OK or right direction button to enter.
2. Press the left or right direction button to select the
frequency or use the digit key to input a channel,
then highlight Start, press OK or right direction
button to search.
3. When the search is completed, press Menu to return.
9
Satellite Manual Installation
3. Press the up or down direction button to highlight the
trasponder, press OK to select it. Then press the blue
button and press OK to search.
4. Allows you to add/edit/delete or a transponder below the
note on the OSD.
1. Display the Channel menu, press the up or down
direction button to highlight Tuner Type, press the
left or right direction button to select Satellite.
2. Press the up or down direction button to highlight
Satellite System, press the OK or right direction
button to enter. First select a satellite, then press
the right direction button to enter.
Common interface: press the right direction button
to select CI card.
Signal Information on DTV channels
1. Select Channel > Signal Information.
2. Press the OK or right direction button to display some
signal information on current digital channel, such as
signal strength, Freq.(MHz), etc..
Cable Manual Installation
1. Display the Channel menu, press the up or down
direction button to highlight Tuner Type, press the
left or right direction button to select Cable.
2. Press the up or down direction button to highlight Manual
Scan, press the OK or right direction button to enter. Press
the up or down direction button to highlight Digital Manual
Scan, press the OK or right direction button to enter.
3. Use the digit key to input a frequency, then highlight Start,
press OK or right direction button to search. When the
search is completed, press Menu to return.
After the automatic search, channels are arranged in a
preset order. You can skip channels, modify the preset
order and delete channels.
Skip channels: if a channel was stored twice or
its reception is poor, you can simply skip it. The
skipped channels can not be selected by pressing the
PROGRAM UP /DOWN button.
Display the Channel menu, press the up or down
direction button to highlight Channel Edit.
press the OK or right direction button to enter.
Press the up or down direction button to select a
channel and press the green button to skip.
Delete Channels: Press the up or down direction
button to highlight a channel, then press red button
to delete.
Channel Edit
Frequency
Strength
514.00MHz
0
10
Move Channels: Press the up or down direction
button to highlight a channel, then press blue button
to select it, press the up or down direction button to
move.
Rename Channels: (only in ATV) Press the up or
down direction button to highlight a channel, then
press yellow button to enter. Press the red button to
clear the channel’s name. Then press the up/down/
left/right direction button to highlight the letter, then
press OK to enter.
The menus for adjusting the picture are used to obtain
the best picture settings according to your preference,
the type of program you are watching and the ambient
lighting.
Display the main menu by pressing Menu and select
Picture, then press the OK button to confirm. The
Picture options are as below:
Note: some options may be not available for certain
signal sources.
Picture Mode: uses the left or right direction button to
scroll through the picture preset settings: Standard,
Dynamic, Mild, Personal.
Brightness: adjusts the brightness of the picture.
Contrast: adjusts the difference between light and
dark areas of the picture.
Saturation: adjusts the richness of colour.
Sharpness: adjusts the crispness of the edges in the
picture.
Backlight: Users adjust the backlight according to
their own preferences manually , it can adjust the
overall image and grey, does not affect the contrast.
Color Temp: adjusts the color temperature of the
picture. Use the left or right direction button to scroll
through the color settings: Cool for a more blue palette
of picture colors, Standard, and Warm for a more red
palette of picture colors.
Aspect Ratio: uses the left or right direction button to
select the picture size. (Note: You are recommended
to use the full screen mode. Do not use the display
Adjusting the Picture
mode with black bars on both sides of the picture (such as
4:3) for long time, otherwise the TV screen may be
damaged permanently.)
Advanced Settings: press the OK or right direction button
to display its submenu.
NR(noise reduction): this setting reduces picture
“static”or any type of interference. This feature is
especially useful for providing a clearer picture in
weak analog signal conditions. Press the left or right
direction button to choose between these options:
Off/Weak/Medium/Strong.
Press the left or right direction
button to choose between these options: On/Off.
Note: some options may appear in the next page of
Picture menu, you can press the up or down direction
button to switch.
Dynamic Contrast: turns on this option to adjust the
contrast automatically.
Adjusting the Sound
Display the main menu by press the Menu button and select
Sound, then press the OK button to confirm. The Sound
menu appears with the following options:
Sound Mode:
- Sound Mode: use the left or right direction button to
select a sound type from the list: Standard, Movie,
Music and Personal.
- Treble and Bass: use the left or right direction
button to adjust the level.
Balance: use the left or right direction button to balance the
sound between the left or right speakers.
-
-
Surround Sound: use the left or right direction button to
switch On or Off.
EQ Setting: Highlight the EQ Setting then press OK or right
direction button to enter.
Audio Description(only available in DTV mode): Press
the OK or right direction button to display its submenus:
Mode: Press the left or right direction button to set
ON/OFF mode.
Volume: Press the left or right direction button to adjust
the volume.
Chapter 3
Advanced Functions
Hue
11
Advanced Functions
EQ mode: Off/Pop/Rock/User/Jazz can also use the
left or right direction button to adjust the level of every
frequency.
SPDIF: Use the left or right direction button to select a
format for SPDIF output.
Sound type(only available in DTV mode): use the left
or right direction button to select a sound type from the
list.
AVL : select On mode to reduce the annoying blasts in
volume during commercial breaks and also amplifies
softer sounds in program material. Eliminates the need
to constantly adjust the volume.
Note: the options offered depend on the program you
are watching.
Selecting a Signal Source
Press Source button on the remote control to
enter Source menu directly.
1.Press the up or down direction button to select
your desired source.
Note: The available source might differ
depending on the model.
2. Press the OK button to confirm the selection.
Using the Lock System
The Lock options are as below:
Channel Locks: this option allows you to lock a certain
TV channel. Highlight Channel locks, press the OK or
right direction button to display Channel lock menu.
Use the up or down direction button to select a certain
TV channel you want to lock, then press the OK button
to lock. To unlock, use the same operation.
Parental Rating: this option allows you to set a rating
to a program. Highlight Parental rating. Then use the
left or right direction button to adjust.
Lock Keypad: this option allows you to lock the set's
buttons, press the left or right direction button to select
On to lock the set's buttons.
New Password: this option allows you to change the
password. Press the number button to input the new
password twice to set the new password.
Clear Lock: this option allows you to initialize the Lock
System. Press OK or right direction button to initialize
the Lock System.
Setup
OSD Language: Use the left or right direction to select the
OSD Language.
Audio Languages: use the ok or right direction to enter.
This menu can control the special function for TV
channels.
Note: you must enter the password before Entering the
Lock menu.
Display the main menu by pressing Menu and select
Lock System, then press OK to confirm. Then press
the number button to enter the password to enter the
Lock menu. The factory default code is 0000. And the
super password is 8899. If you forget your code, enter
it to override any existing codes.
YPbPr
OSD Language
Audio Language
Subtilte
Teletext
Blue Screen Off
Mode Setting Home Mod e
Tim e Setti ngs
PVR Settings
English
Lock System
Enter Pas sword ---
Enable On
Channel L ocks
Parenta l Rating 5+
Lock Keyp ad Off
New Passw ord --- -
Clear Loc k
Advanced Functions
12
Subtitle Primary Language and Subtitle Secondary
Language: press the left or right direction button to
select a subtitle type. You can select Hearing Impaired
to display the hearing impaired subtitle with your
selected language.
Mode Setting: use the left or right direction button to
select Home or Store mode. Home mode is the default.
In Store mode, you can adjust the picture mode.
Teletext: press the OK or right direction button to
enter and select the Digital Teletext Language.
Decoding page language: Select a proper type of
language in which Teletext will display.
The Setup
your TV set, to program an automatic turn-off timer.
Display main menu by pressing Menu. Select Setup
and press OK to confirm. The Time Settings options
are as below:
menu allows you to set the time zone on
Time Settings
OSD Timer: Use the left or right direction button to
select the OSD time.
Sleep Timer: sets a period of time after which the TV
set goes into standby mode. Use the left or right
direction button to set the period (240 minutes
maximum). To disable this function, select Off.
Auto Sleep:
Time Zone: use the up or down direction button to
select the local time zone.
Time: press the OK or right direction button to
display its options:
Auto Sync: use the left or right direction
to select On or Off. If On selected, the TV will get
the time automatically from DTV signals, and the
Time item cannot be adjusted. If you select Off, you
should set date and time. Highlight Date or Time,
press OK to enter, then use the left/right/up/down
direction button to adjust the time and date.
Power Off Timer: Use the left or right direction
button to select On or Off. If you select On, highlight
Time, press OK to enter, use the left or right direction
to select input space, then use the up or down
direction button to adjust the time and date.
Subtitle: this enables subtitle for digital TV
channels. Select Subtitle option, press the OK or
right direction button to display its submenus:
Mode: press the left or right direction button
to turn On or Off the subtitles.
Presses the left or right direction button
to select the auto standby time.
Reset
To Allow you to reset the TV to factory default settings.
1. Select Setup, then press OK to confirm.
2. Select Reset or press OK or the right direction button to
enter.
3. Press the left or right direction button to select YES or
NO.
Note: Select YES, the TV will reset. Select No, TV
will return to the previous menu.
Blue Screen
Press the left or right direction button to select On or Off.
First Time Setup
Press OK or right direction button to enter.
USB Functions
Your TV is fitted with a USB connector that enables you to
view photos, listen to music or watch videos stored on a
USB storage device.
Supported file formats:
Picture: JPEG
Music: Mp3
Movie: AVC, H.264, MPEG 1/2/4, Divx…
Text: TXT
13
Advanced Functions
Note: some USB keys and USB products like
digital cameras or mobile phones are not fully
compatible with USB 2.0 standard so it may not
work with the TV multimedia player. Not all USB
keys or devices are compatible for the USB
function.
When a USB device is detected, it notes “USB Plugged
In”.
Photo
To display photos if available.
1. Select Media > Photo, then press OK to enter
the main file content browser.
2. In the main file content browser, use the left/right/up
/down direction buttons to select a photo or an inner
file folder.
3. Select an inner file folder, press OK to enter a sub file
content browser.
4. Use the left/right/up/down direction buttons to select
a photo in either main or sub file content browser.
5. Select a photo, press OK to watch, and a slide show
begins from the selected photo. Press OK to pause
the photo if you want to rotate the paused photo.
Press Yellow Button to dis
6. Press the related buttons on the remote control to
perform the available functions shown on the function
bar at the bottom of the TV screen.
Music
To playback music if available.
1. Select Media > Music, then press OK to enter
the main file content browser.
2. Use the left/right/up/down direction buttons to
select a song in either main or sub file content
browser in the same way as in photo display
function.
3. Select a song, press OK to play, and an automatic
To enter the Media manually, press Source on the
remote control and select Media.
play the Quick Menu in
the browser mode. You can select Interval Time and
different play mode etc..
playback begins from the selected song. Press
Yellow Button to display the music menu in the
browser mode. You can select different play mode.
4. Press the related buttons on the remote control to
perform the available functions shown on the
function bar at the bottom of the TV screen.
Movie
To watch video if available.
1. Select Media > Movie, then press OK to enter
the main file content browser.
2. Use the left/right/up/down direction buttons to select
a video in either main or sub file content browser in
the same way as in photo display function.
3. Select a video, press OK to watch, and an automatic
playback begins from the selected video. Press
Yellow Button to display the video menu in the
browser mode. You can select different play mode
etc..
4. Press the related buttons on the remote control to
perform the available functions shown on the
function bar at the bottom of the TV screen.
Text
To read text if available.
1. Select MEDIA > Text, then press OK to enter
the main file content browser.
2. Use the left/right/up/down direction buttons to select
a text in either main or sub file content browser in
the same way as in photo display function.
3. Select a text, press OK to watch. Press Yellow
Button to display the text menu in the browser
mode. You can select Encode Type.
4. Press the related buttons on the remote control to
perform the available functions shown on the
function bar at the bottom of the TV screen.
PVR (Personal Video Record)
Allows you to record your favourite DTV programme.
Before you use the function, connect a USB memory
device to the set first.
Select Menu> Setup>PVR Settings, then press OK
or right direction button to enter the PVR Settings
content browser.
File Manager: You can preview the video files in the
USB memory device which you recorded. Use the up
or down direction button to select a video file, then
press OK to watch.
Pho to Mus ic Mov ie Text
Device List: You can preview the USB memory
device's information.
Scheduled Record: Use the up or down direction
button to select a group, Press OK to enter. You can
select the Frequency, Channel, Start Time, End Time,
Finally, Use the up or down direction button to
highlight Save, Press OK to save the scheduled
record information.
Time shift
Allows you to record the DTV programme so that you
won't miss the favourite part even if you go out.
Before you use the function, connect a USB device to
the TV first. For the first time, you should do the disk
setup for the USB device.
1. Press the ECO button on the remote to enter the
timeshift menu.
2. Press the left or right button to select play
mode, and press OK to confirm.
3. Select the STOP, and press OK to exit the time
shift function.
Notes:
- Only supports USB memory device of FAT32 and
FAT16 format.
- Before you plug the USB memory device to the set,
make sure you have backed up the data in the
device to avoid unusual performance which will
may cause data loss.
- The bigger size of USB memory device for PVR
function, the longer you can record the programme.
- The set cannot play files normally if the parameters
of the file exceed the limitations of the system, the
file format is not supported, the file is damaged , or
the file can not be decoded
- Do not unplug the USB memory device when the
system is reading a file or transmitting data,
otherwise the system or the device may be
damaged.
- We recommend that you use a USB device with at
least 1Gb free space and a disk speed faster than
5.0M/sec.
- If you attempt to channel change during PVR and
time shift, amessage prompts to let you select Yes or
No. You can select Yes to exit the PVR or the time
shift funtion and execute the channel change.
direction
Advanced Functions
14
Troubleshooting
Most problems you encounter with your TV can be
corrected by consulting the following troubleshooting list.
No picture, no sound
1. Check if the fuse or circuit breaker is working.
2. Plug another electrical device into the outlet to make
sure it is working or turned on.
3. Power plug is in a bad contact with the outlet.
4. Check the signal source.
No colour
1. Change the colour system.
2. Adjust the saturation.
3. Try another channel. Black-white program may be
received.
Remote control does not work
1. Change the batteries.
2. Batteries are not installed correctly.
3. Main power is not connected.
No picture, normal sound
1. Adjust the brightness and contrast.
2. Broadcasting failure may happen.
Normal picture, no sound
1. Press the VOLUME + button to increase volume.
2. Volume is set to mute, press the Mute button to
restore sound.
3. Change the sound system.
4. Broadcasting failure may happen.
Unorderly ripples on the picture
It is usually caused by local interference, such as cars,
daylight lamps and hair driers. Adjust the antenna to
minimize the interference.
Snowy dots and interference
If the antenna is located in the fringe area of a television
signal where the signal is weak, the picture may be marred
by dots. When the signal is extremely weak, it may be
necessary to install a special antenna to improve the
reception.
1. Adjust the position and orientation of the indoor/outdoor
antenna.
2. Check the connection of antenna.
3. Fine tune the channel.
4. Try another channel. Broadcasting failure may happen.
Ignition
Black spots or horizontal streaks appear, or the picture
flutters or drifts. This is usually caused by interference
from car ignition system, neon lamps, electric drills, or
other electrical appliance.
Ghost
Ghosts are caused by the television signal following two
paths. One is the direct path, the other is reflected from
tall buildings, hills, or other objects. Changing the direction
or position of the antenna may improve the reception.
Radio frequency interference
This interference produces moving ripples or diagonal
streaks, and in some case, loss of contrast in the picture.
Find out and remove the radio interference source.
Chapter 4
Other Information
15
Base Installation
To fix the double support base on the unit by
screws, the installation is completed.
Рисунки и иллюстрации в данном Руководстве
Пользователя предусмотрено только для справки
и могут отличаться от внешнего вида устройства.
Дизайн продукта и спецификации могут быть
изменены без предварительного уведомления.
LED49D2900S
LED55D2900S
LED40D2900AS
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
ТЕЛЕВИЗОР ЦВЕТНОГО ИЗОБРАЖЕНИЯ
ЖИДКОКРИСТАЛЛИЧЕСКИЙ
.......................................... 3
Изделие ..................................................................... 3
Питание и сетевой шнур ........................................... 3
Шнур питания и сигнальный кабель ......................... 3
Среда использования ................................................ 3
Чистка ......................................................................... 3
Крепление телевизора на стену ............................... 3
Важная информация ................................................. 3
............. 4
.............................. 5
.......................................... 6
...................................................................... 7
................................................................... 7
................................................... 8
.................................. 8
................................... 8
...................................... 8
............................. 9
............................... 9
.... 9
................................ 9
............................................ 10
..................................................... 10
.......................................... 11
.................... 11
.................................................................. 11
.....................................................12
..............................................................12
PVR .............................................................................. 13
..
2
4
...................... 15
............... 15
.............................................................. 15
....................................16
...................................... 9
Настоящее руководство по эксплуатации распространяется
на телевизор цветного изображения жидкокристаллический
TCL, предназначенный для приема сигналов вещательного
телевидения и содержит информ3ацию, необходимую
потребителю для правильной и безопасной эксплуатации.
4
Инструкция
Возьмем для примера некоторые модели:
1.Кнопка
Включает телевизор или переводит в режим ожидания. Телевизор включен, нажмите
кнопку кратковременно, это вызовает системную функцию для выбора Источника входного сигнала, Каналов
и регулировки Громкости. (Только в режиме ATV или DTV, канал может быть выбран.). Длительное нажатик
кнопки переведет телевизор в режим ожидания.
2. Кнопки
Увеличение/уменьшение громкости. В системе функции, нажмите кнопку , чтобы
выбрать функцию, соответственно.
Кнопки управления на корпусе телевизора
Время выдержки телевизора при комнатной температуре до включения питания после транспортирования
или хранения при пониженной температуре окружающей среды должно быть не менее 5 часов.
ВНИМАНИЕ!
При неправильной установке литиевых батарей возможен взрыв.
Батареи заменять батареями того же или аналогичного типа
ПЕРЕЧЕНЬ ПОВРЕЖДЕНИЙ, НЕ ДОПУСКАЮЩИХ ДАЛЬНЕЙШУЮ ЭКСПЛУАТАЦИЮ ТЕЛЕВИЗОРА
• Сетевой шнур или вилка повреждены;
• Экран телевизора поврежден;
• При попадании в телевизор влаги;
• После падения телевизора;
• Если телевизор не работает должным образом после того как Вы обратились в раздел по устранению
неисправностей.
Дисплеи телевизоров TCL со светодиодной подсветкой состоят из множества субпикселей, и его изготовление
требует применения наиболее совершенных технологий. Однако на экране может быть несколько светлых или
темных пикселей. Они не влияют на качество работы изделия. Для получения конкретной информации о
допустимых значениях битых пикселей для вашей модели телевизора просим обращаться в техническую
поддержку через форму обратной связи на сайте http://tcl.com.ru, указав в сообщении модель телевизора
и серийный номер своего устройства.
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
/