TCL L43P8MUS Руководство пользователя

1:1

A5

80g双胶纸

白底黑字

基础说明书72-RT51HS-EAP1A

英语+俄语

英语在前，俄语在后

包含70-STDD30-EEM1A底座插页

俄语部分以业务签名确认为准

俄语参数表数据来源于产品规格书

制作表编号：HZ2019-05-115R

物料编号：72-RT51HS-EAPAC

内容：说明书

型号：43P8

日期：2019-6-3

BOM编号：H7-43F60ND-URNB0AA

ELQ142311H

牌子名称： TCL L43P8US

批次号：

机芯：RT51TS-RU

制作人

PREPARED BY

项目/美工工程师

ENG.CHECKED BY:

市场业务中心确认

CONFIRM BY：

销往 RUSSIA 地：

：

TCL电子控股有限公司

运营中心-惠州TV工厂-PE部

产品辅助设计室（外销订单）

L43P8US/L50P8US/L55P8US/L65P8US

2

Table of Contents

Chapter 1: Introduction

Precautions ............................................................... 3

Warning ................................................................... 3

Product .................................................................... 3

Power and Plug ....................................................... 3

Power Cord and Signal Cable ................................. 3

Use Environment ..................................................... 3

Cleaning................................................................... 3

Hanging the TV Set on the Wall............................... 3

Sockets ...................................................................... 4

Remote Control Functions ...................................... 5

RC802V remote control ........................................... 5

RC802N remote control ........................................... 6

Chapter 2: Getting Started

Switching On ............................................................. 7

............................................................. 7

Network Connection ................................................. 8

TV Button .................................................................. 9

Initial Setup ............................................................... 9

Chapter 3: Basic TV Operations

Accessing Channels .............................................. 10

By RC802V remote control .................................... 10

By RC802N remote control .................................... 10

Watching Connected Devices ............................... 10

Adjusting Volume ................................................... 10

Accessing Smart TV Homepage ........................... 10

Accessing T recommended Apps ......................... 10

Using System Settings menu ................................ 10

Using TV Options menu ......................................... 10

Chapter 4: Using More of Your TV

Installing Channels ................................................. 11

Common Interface .................................................. 11

Using the Common Interface Function .................. 11

Accessing Common Interface Services ................. 11

Using Subtitles ....................................................... 11

........................................ 11

Enabling Subtitle Languages on Digital TV Channels

11

Selecting a Subtitle Type on Digital TV Channels . 11

Using Teletext ......................................................... 12

Selecting Decoding Page Language ..................... 12

Digital Teletext Language ...................................... 12

Using Instant Power On ......................................... 12

Network Wake Up ................................................... 12

T-Link ....................................................................... 12

Enabling or Disabling T-Link .................................. 12

Using Auto Power On ............................................ 12

Using Auto Standby ............................................... 12

Using EPG (Electronic Program Guide) ............... 12

Bluetooth Function ................................................. 13

Time Shift ................................................................ 13

Quick Access of Time Shift .................................... 13

PVR (Personal Video Recorder) ............................ 13

T-cast ....................................................................... 14

Reset Shop .............................................................. 14

Settings ....................................................... 14

Password in Parental Control ............................... 14

Chapter 5: Other Information

Problems & Solutions ............................................ 15

Troubleshooting ..................................................... 16

Legal Statement ...................................................... 17

Table Stand Installation

..........................................18

3

IntroductionChapter 1

Precautions

Read all of the instructions before operating the set.

Keep these instructions well for future use.

Warning

Never place a television set in an unstable location. A

television set may fall, causing serious personal injury

or death. Many injuries, particularly to children, can be

avoided by taking simple precautions such as:

-

Using cabinets or stands recommended by the

manufacturer of the television set.

-

Only using furniture that can safely support the

television set.

-

Ensuring the television set is not overhanging the

edge of the supporting furniture.

-

Not placing the television set on tall furniture

(for example, cupboards or bookcases)

without

anchoring both the furniture and the television set to

a suitable support.

-

Not placing the television set on cloth or other

materials that may be located between the television

set and supporting furniture.

-

Educating children about the dangers of climbing on

furniture to reach the television set or its controls.

If your existing television set is being retained and

relocated, the same considerations as above should be

applied.

Product

• Do not block or cover the ventilation openings on the

back cover.

• Do not push objects of any kind into this unit through

the cabinet slots as they could touch the current

carrying parts or short-circuit parts, resulting in re,

electric shock, or damage to the unit.

• Do not attempt to open the cabinet as this may cause

damage. There are no parts inside you can service by

yourself. Refer all servicing to qualied personnel.

• Do not touch the screen surface with ngers as this

may scratch or mar the TV screen.

• Do not impact the TV screen with hard pressure as

this may damage the TV screen severely.

Power and Plug

• Unplug the set under the following conditions:

-

If the set will not be used for a long period of time.

-

If the power cord or the power outlet/plug is

damaged.

-

Follow the instructions to install and adjust the

product. Adjust those controls that are covered in

these operating instructions as improper adjustment

of other controls may result in damage. If this

happens, unplug the set and refer to the service

personnel.

-

If the set is subject to impact or has been dropped

and the cabinet has been damaged.

• Where the mains plug or an appliance coupler is used

as disconnect device, the disconnect device shall

remain readily operable.

(*Where an all-pole mains switch is used as the

disconnect device, the switch shall remain readily

operable.)

Power Cord and Signal Cable

• Do not allow anything to rest on or roll over the power

cord and the signal cable.

• Protect the power cord and the signal cable from

being trampled.

• Do not overload the power cord or the power outlet.

• Do not expose the power cord and the signal cable to

moisture.

Use Environment

• Do not place the set on an unstable cart, stand, or

table.

• Place the set on a place that allows good ventilation.

• Do not use the set near damp, and cold areas.

• Do not expose the set to excessive heat such as direct

sunlight, re, or the like and no naked ame sources,

such as lighted candles, should be placed on the

apparatus.

• Do not expose the set to dripping or splashing and

no objects lled with liquids, such as vases, shall be

placed on the apparatus.

• Do not use the set in dusty environments.

• Operating Temperature: 5°C to 35°C (41°F to 95°F)

Operating Humidity: 20% to 80%, non-condensing

Storage Temperature: -15°C to 45°C (5°F to 113°F)

Storage Humidity: 10% to 90%, non-condensing

Cleaning

• Dust the set by wiping the screen and the cabinet with

a soft, clean cloth or some special liquid cleaner.

• Do not apply excessive force to the screen when

cleaning.

• Do not use water or other chemical cleaner to clean

the screen as this may damage the surface of the TV

screen.

Hanging the TV Set on the Wall

Warning

:

This operation requires two people.

To ensure a safe installation, observe the following

safety notes:

• Check that the wall can support the weight of the TV

set and wall mount assembly.

• Follow the mounting instructions provided with the

wall mount.

• The TV set must be installed on a vertical wall.

• Make sure to use only screws suitable for the material

of the wall.

• Make sure that the TV set cables are placed so that

there is no danger of tripping over them.

All other safety instructions about our TV sets are

also applicable here. (

Note

:

Certain TV model is not

designed to be mounted to the wall.

)

4

Introduction

Sockets

Note

:

The location and names of the sockets on the TV may vary according to TV model, and not all sockets

available on all models.

LAN

This socket can be used to connect to external modem or network

access equipment.

HDMI, HDMI (Service port) or HDMI (ARC) socket (input)

The HDMI (High-Denition Multimedia Interface) socket can be

used to connect a Blu-ray player, PC with a compatible video

card installed, certain DVD players or a high-denition compatible

digital satellite decoder. This socket provides an uncompressed

digital connection that carries both video and audio data by way

of an integrated mini-plug cable.

Antenna/Cable input socket

This socket can be used to connect the outside aerial or cable

network.

Satellite input socket

This socket can be used to connect a coaxial cable to receive the

signal from your satellite receiver.

AV adapter socket (input)

This socket can be used to connect the attached AV adapter

cable with VIDEO and AUDIO L & R IN sockets. The AV IN

sockets can be used to connect a range of equipment, including

video recorders, camcorders, decoders, satellite receivers, DVD

players, or games consoles.

Digital audio out (Optical) socket

This socket can be used to connect a compatible digital audio

receiver.

Headphone socket (output)

This socket can be used to connect headphones or stereo

earphones.

Warning:

Excessive sound pressure from earphones and

earphones and headphones can cause hearing loss.

Common interface slot

This slot can be used to watch encrypted digital TV channels by

inserting a CAM (Conditional Access Module) along with a smart

card provided by a digital TV service operator.

USB 2.0 socket (input)

This socket can be used to connect a USB 2.0 device.

Note

: 1. The number of USB sockets on the TV may vary

according to TV model. 2. Only the USB 2.0 with black socket is

available for far-eld voice control. 3. To use far-eld voice control,

you need a far-eld voice control module which is sold separately.

Only the TCL brand module of model FVC

*

(

*

stands for the

numbers) is compatible with this TV. For details, please refer to

your local dealer.

LAN

Antenna/

Cable input

Router / Modem

USB 2.0

Satellite

input

Common interface

Digital

audio out

(Optical)

HDMI

or HDMI

(Service port)

or HDMI

(ARC)

V L R

AV adapter

HDD

5

Introduction

Remote Control Functions

Most of your television's functions are available via the menus that appear on the screen. The remote control(s)

supplied with your set can be used to navigate through the menus and to congure all the general settings.

Note

:

1.Figures and illustrations in this operation manual are provided for reference only and may dier from actual product

appearance. 2.The remote control type may be changed without notice, please refer to the remote control attached

with your TV. 3.Certain function may not be available for some models, e.g. GUIDE/SUBTITLE functions are only

available under DTV source. And DTV is not available for certain model.

-

Installing Batteries

1.

Push to open the back cover as illustrated.

2.

Insert two AAA batteries according to the

polarities marked on the battery case.

3.

Replace the back cover as illustrated.

To display the Settings menu.

Standby / quit standby.

To access the Smart TV homepage.

To display the Option menu.

▲/▼/

◄

/

►

Navigation direction buttons. The ▲/▼ buttons are also used

to

change channels in TV mode.

OK

To conrm an entry or selection. This button is also used

to

display the channel list in TV mode.

To return to the previous menu or quit an app.

To select input source.

To turn on the voice function.

(Available only when the network

connection works normally.)

To pop up the virtual remote control keyboard when available.

/

To control the volume.

P /

To change channels.

To access Netix.

(Not available for some models.)

To access T recommended apps.

RC802V remote control

Note: Certain function may be accessed from the virtual remote control keyboard only,

please press button on the remote to display it and operate accordingly.

-

How to Use the Remote Control

When using button for the rst time, you will be prompted to pair the remote with the TV. Please follow the

on-screen guide for paring instructions.

a.Keep the remote control and TV in 1 meter, press

OK

and button on the remote at the same time. You can

use

button after activating successfully.

b.This voice search function is only available for content search from certain apps.

c.Set languages in the

settings

menu under smart TV homepage to your local language or ocial language to

enhance voice search successfully.

1 2

3

6

Introduction

To switch the sound o and back on.

Standby / quit standby.

Numeric buttons

To enter channel numbers or a digit.

To access T recommended apps.

LIST

To display the channel list.

/

To control the volume.

To display program information, if available.

To display the Settings menu.

P /

To change channels.

To access or exit the Smart TV homepage.

To display the Option menu.

▲/▼/

◄

/

► Navigation direction buttons.

OK

To conrm an entry or selection.

To return to the previous menu or quit an app.

To select input source.

EXIT

To exit the Settings menu.

LANG

To select an audio language available for selected

digital TV program.

GUIDE

To toggle the Electronic Program Guide on or o.

(only

available for digital channels

.

)

TEXT

To toggle Teletext on or o.

SUBT.

To select a subtitle language available for selected digital TV

program.

Colour buttons

To select tasks or Teletext pages.

To start fast reverse.

To pause playback.

To start fast forward.

To access the Record menu.

To start playback.

To stop playback.

To access Netix.

(Not available for some models.)

RC802N remote control

-

Installing Batteries

1.

Push to open the back cover as illustrated.

2.

Insert two AAA batteries according to the polarities marked on the battery case.

3.

Replace the back cover as illustrated.

7

Chapter 2 Getting Started

Switching On

Follow the instructions on this page on how to switch on your TV set

and the remote control before going on to following pages describing

how to use the channel set-up procedure.

1.

Insert two AAA batteries in the remote control.

Precautions on using batteries:

- Only use the battery types specied.

- Make sure you use the correct polarity.

- Do not mix new and used batteries.

- Do not use rechargeable batteries.

- Do not expose batteries to excessive heat such as sunshine,

re or the like, throw them in a re, recharge them or try to open

them, as this could cause them to leak or explode.

- Remove the batteries from the remote control if you are not using

it for a long period of time.

- Attention should be drawn to the environmental aspects of battery

disposal.

2.

Connect the power cable FIRST to the television, THEN to a mains

socket. (

Note

:

If the power cable is connected to the television,

please only connect the power cable to the mains socket.

)

Your TV set should only be connected to an AC supply. It must

not be connected to a DC supply. If the plug is detached from the

cable, do not, under any circumstances, connect it to a mains

socket, as there is a risk of electric shock.

Note

:

The gures are for representation only, the location of power

socket of the television may dier depending on the model.

3.

Connect an outside aerial to the ANTENNA IN socket at the back

of the TV set.

The aerial socket (75 OHM - VHF / UHF / cable) can be used for

connecting an external aerial or other equipment tted.

Note

:

If you want to receive the signal from your cable or cable

box, please connect a coaxial cable to the CABLE IN socket at the

back of the TV set.

4.

When powered on, the TV will be turned on directly or be in

standby mode.

If the power indicator lights up, the TV set is in standby mode.

Press the button on the remote control or on the TV set to turn

on the TV.

Switching Off

• To put the TV set into standby mode, press the button on the

remote control. The TV set remains powered up, but with low

energy consumption.

• To switch o the TV set, unplug the mains socket from the mains

outlet.

8

Getting Started

Network Connection

Your TV will require an internet connection to operate all functions. Data usage charges may apply.

Please refer to your Internet Service Provider (ISP) for additional information.

To access the Internet, you must subscribe to high speed broadband Internet service with your Internet service

provider (ISP).

Your TV can be connected to your home network in two ways:

• Wired, using the RJ45 (LAN) connector on the back panel.

• Wireless, using the internal wireless and your home wireless network.

Note

:

Instructions below are just the usual ways to connect your TV to the wired or wireless network. The connection

method may be dierent depending on your actual network conguration. If you have any questions about your

home network, please refer to your ISP.

Connecting to a Wired Network

To connect to a wired network:

1.

Ensure you have:

• An Ethernet cable long enough to reach your TV

• A router or modem with an available Ethernet

port

• A high-speed Internet connection

• An Ethernet (LAN) port on the back of the TV

2.

Connect your Ethernet cable to the router and to

the Ethernet port on the back of the TV.

3.

Use the

Network & Internet

menu to configure the

TV.

Connecting to a Wireless Network

To connect to a wireless network:

1.

Ensure you have:

• A router broadcasting a high-speed wireless

signal

• A high-speed Internet connection

2.

Use the

Network & Internet

menu to configure the

TV.

Note

:

Please follow below steps to enter the

Network & Internet

menu.

1. Press on the remote control to display the Smart TV homepage.

2. Press

▲/

◄/► to move the cursor to

(Settings)

on the right top of the screen and press

OK

to enter the

system settings.

3. Press ▲/▼ to select

Network & Internet

, then press OK to enter the submenu and follow the on-screen

guidance to set up your network.

Router

Modem Internet

LAN port

Modem Internet

Wireless router

9

Getting Started

TV Button

If the batteries in your remote control are run down, you can use the button(s) on your TV set.

For models only with one / button on the TV set, it may work just as Power on/Standby button, or as a

multi-function controller.

You can turn on the TV by pressing button at the bottom of the TV.

While the TV is on, the multi-function menu appears by pressing button at the bottom of the TV. More

information about how to use the multi-function menu, please refer to the gure below.

• Press to move the highlight to the next function selection

• Press and hold the button for more than 2 seconds to conrm your selection.

Note:

You can follow the on-screen guide to operate.

Figures and illustrations are provided for reference only and may vary depending on the model.

Initial Setup

The rst time you switch the set on, the

Welcome

wizard appears, which guides you through the initial setup

process. Follow the on-screen instructions to nish the initial setup process such as selecting the language,

connecting to the network, and more. During each step, either make a choice or skip the step. If you skip a step,

you can perform the setup later from the settings menu.

10

Chapter 3 Basic TV Operations

Accessing Channels

By RC802V remote control

Using the ▲/▼ buttons:

press the ▲/▼ buttons on the

remote control to scroll through the channels.

Using the OK button:

press the

OK

button to display

the channel list and press ▲/▼/◄/► and

OK

to select

channels.

Using the P / buttons

: press the

P /

buttons on

the remote control to scroll through the channels.

Using the button:

press to display the virtual

remote control keyboard, then you can use the numeric

buttons or the

LIST

button to operate accordingly.

By RC802N remote control

Using the numeric buttons

: press the corresponding

numeric buttons on the remote control to access the

channels.

Using the P / buttons

: press the

P /

buttons

on the remote control to scroll through the channels.

Using the LIST button

: press the

LIST

button on the

remote control to display the channel list and press

▲/▼/◄/►

and

OK

to select channels.

Watching Connected Devices

Press on the remote control to display the source

list. Press

▲/▼

to select TV or other input sources and

press

OK

to conrm.

You can also press on the remote control to display

the homepage, press

▲/

◄/►

to move the cursor to

the

(Inputs)

area on the right top of the screen, and

press

OK

to enter. Then press

▲/▼

and

OK

to select

the input source.

Adjusting Volume

Press the

/

buttons on the remote control to

increase or decrease the volume.

Accessing Smart TV Homepage

Allows you to enjoy Internet Applications (Apps) and

specially adapted Internet websites, and perform system

settings for your TV. You can make controlling with the

TV remote control.

WARNING:

• Congure the network settings before using

Smart TV

applications

.

• Slow responses and/or interruptions may occur,

depending on your network conditions.

• If you experience a problem using an application,

please contact the content provider.

• According to circumstances of the content provider, an

application’s updates or the application itself may be

discontinued.

• Depending on your country's regulations, some

applications may have limited service or not be

supported.

• Changes in application content may be made without

prior notice by the service provider.

1.

Press on the remote control to display the Smart

TV homepage.

2.

Press

▲/▼/◄/►

and

OK

to enter the desired apps,

functions or settings.

3.

Press to return to the homepage.

4.

To exit the homepage, press on the remote

control to display the source list, and then press

▲/▼

and

OK

to select your desired input source.

Note

: Since the connection with Internet takes time, it’s

recommended that you wait a few minutes to use

the Smart TV feature after activation of TV from

standby.

Accessing T recommended Apps

Allows you to enjoy Internet Applications (apps).

1.

Press on the remote control to display the

recommended apps.

2.

Press

▲/▼/◄/►

and

OK

to enter the desired apps.

For the rst time, some apps will be downloaded

automatically.

3.

Press to return to the homepage.

Using System Settings menu

Allows you to not only adjust device settings, such

as Network, Power and Apps, etc., but also set

preferences.

1.

Press on the remote control to display the Smart

TV homepage.

2.

Press

▲/

◄/►

to move the cursor to

(Settings)

on the right top of the screen and press

OK

to enter

the system settings.

3.

Press

▲/▼

to choose the items and

press

OK

to enter.

4.

Press to return to previous interface.

Using TV Options menu

The follow instructions introduce how to operate and

access the options menu of the TV under TV mode with

the remote control.

Note

: Some of the functions might be unavailable in

certain input sources. And for some models,

certain options are not available.

To access the menu system:

1.

Press

on the remote control to display the menu.

2.

Press

▲/▼

to select the desired item, then press

OK/►

to enter the corresponding submenu.

3.

In submenus, press

▲/▼

to select menu options,

then press

OK/►

to enter the option list, the

adjustment interface, or the corresponding submenu.

4.

Press to exit.

Notes

:

- Press on the remote control, select

Settings

and

press

OK

to enter the Settings menu.

- Setting

LED motion clear

on will make fast moving

images clearer by controlling the LED backlight, but

the picture will be darker and more ickering than with

LED motion clear

o.

11

1.

Following the directions printed on the CAM, gently

insert the module into the common interface slot on

the TV.

2.

Push the module in as far as it will go.

3.

Turn on the TV and wait for the common interface

function to be activated. This may take several

minutes.

Note

: Do not remove the CAM from the slot.

Removing the module will deactivate the

digital services.

Accessing Common Interface Services

After inserting and activating the CAM, press

on the

remote control, select

System

>

Common Interface

and press

OK/►

to enter. This menu option is only

available if the CAM is correctly inserted and activated.

On-screen applications and content are provided by

your digital TV service operator.

Note

: This feature is only available under DTV source.

Using Subtitles

You can enable subtitles for each TV channel. Subtitles

are broadcast via Teletext or DVB-T/DVB-T2/DVB-C

digital broadcasts. With digital broadcasts, you have

the additional option of selecting a preferred subtitle

language.

Note

: Some options are available only when

Subtitle

is

set to

On

.

Turning On/Off Subtitles

1.

Press

on the remote control, select

Channel

>

Subtitle

and press

OK/►

to enter.

2.

Select the

Subtitle

option, press

OK/►

to enter,

press

▲/▼

to select

On

or

O

and press

OK

to

conrm.

3.

Press to close the menu.

Enabling Subtitle Languages on Digital TV

Channels

1.

Press

on the remote control, select

Channel

>

Subtitle

>

Digital subtitle language 1st

and press

OK/►

to enter.

2.

Press

▲/▼

to select a subtitle language as your

preferred language and press

OK

to conrm.

3.

Press

▲/▼

to select

Digital subtitle language 2nd

and press

OK/►

to enter.

4.

Press

▲/▼

to select a secondary subtitle language

and press

OK

to conrm.

5.

Press to close the menu.

Selecting a Subtitle Type on Digital TV

Channels

Installing Channels

This section describes how to search and store

channels automatically. This may be done in any of the

cases below:

-

you are prompted that there are no channels in TV

mode;

-

you want to update your channels.

1.

In TV mode, press

on the remote control and

select

Channel

>

Channel scan

. Press

OK

/► to

enter.

2.

The TV installs and arranges channels according

to your country or region. Press ▲/▼ to select

Country/Region

, and press

OK

/► to enter. Enter

the default password

1234

or your own password in

case you have changed the password in the

System

>

Lock

menu. Press ▲/▼ to select your country or

region and press

OK

to confirm.

3.

Press ▲/▼ to select

Automatic search

and press

OK

/► to enter.

4.

Press ▲/▼ to select

Tuner mode

and press ◄/► to

select

Cable

,

Antenna

or

Satellite

.

(

Note

: Satellite

option is available only in selected models.)

5.

Press ▲/▼ to select other options and use ◄/► to

configure.

6.

After configuration is completed, press ▼ to select

Search

and press

OK

to start scanning channels.

7.

The channel search may take a few minutes. After

the automatic search, channels are arranged in a

preset order. If you wish to hide or swap channels,

press

on the remote control, select

Channel

>

Channel organizer

and press

OK

/► to enter.

Note

: If the channel search retrieved only the analogue

channels it could be caused by poor broadcasting

and therefore is not covered by manufacturer

warranty. Manufacturers cannot be held

responsible for lack of or poor broadcasting in

some areas.

Common Interface

(* not available for some models)

Encrypted digital TV channels can be decoded with a

Conditional Access Module (CAM) and a card provided

by a digital TV service operator.

The CAM may enable several digital services,

depending on the operator and services you choose

(for example, pay TV). Contact your digital TV service

operator for more information about services and terms.

Using the Common Interface Function

WARNING: Switch o your TV before inserting a

CAM. Be sure to follow the instructions described

below. Wrong insertion of a CAM may damage both

the module and your TV.

Chapter 4 Using More of Your TV

12

Using More of Your TV

such as YouTube, has been installed into the

controller;

4. Networked

standby

is set to

On

in the

Network

menu under homepage by pressing >

(Settings)

>

Network & Internet

and use

▼

to select

Networked

standby

and press

OK

to

activate.

When the TV is in networked standby mode, you can

use the app to wake up the TV remotely.

Notes:

- This feature is disabled if you press and hold the

button on the remote control and conrm to

shut the TV down

- Before using the feature of network wake up, make

sure > (

Settings)

>

Device Preferences

>

Power

>

Instant power on

is set to on.

T-Link

Use this function to search for CEC devices connected

to the HDMI sockets in your TV and enable auto power

on and auto standby between the TV and CEC devices.

Enabling or Disabling T-Link

1.

Press

on the remote control, select

System

>

T-Link

and press

OK/►

to enter.

2.

Press

▲/▼

to select

T-Link

and press

OK/►

to

enter.

3.

Press

▲/▼

to select

On

or

O

and press

OK

to

conrm.

4.

Press

to close the menu.

Using Auto Power On

Enables the TV to automatically power on when you

power on a CEC device (e.g. DVD) with the device’s

remote. Select

On

to enable this function.

Using Auto Standby

Enables all CEC devices to automatically go to the

standby mode when you turn o the TV with the TV

remote. Select On to enable this function.

Note

: The CEC functions depend on the devices

connected and it is possible that some devices

may not interoperate correctly when connected to

this TV. The user manual or the manufacturer of

the problematic devices should be consulted for

further information.

Using EPG

(Electronic Program Guide)

EPG is an on-screen guide that displays scheduled

digital TV programs. You can navigate, select and view

programs.

1.

Press

on the remote control, select

Channel

>

EPG

and press

OK

/► to enter, or press

GUIDE

1.

Press

on the remote control, select

Channel

>

Subtitle

>

Subtitle type

and press

OK/►

to enter.

2.

Press ▲/▼ to select a subtitle type and press

OK

to

conrm. You can select

Hearing impaired

to display

the hearing-impaired subtitles with your selected

language.

3.

Press to close the menu.

Using Teletext

Selecting Decoding Page Language

1.

Press

on the remote control, select

Channel

>

Teletext

>

Decoding page language

and press

OK/►

to enter.

2.

Press

▲/▼

to select a proper type of language in

which Teletext will display and press

OK

to conrm.

3.

Press to close the menu.

Digital Teletext Language

On digital TV channels, depending on the broadcaster,

you may be able to enjoy a service with multiple initial

Teletext pages in dierent languages. This function

allows you to select an available language as primary

language, which relates to dierent initial Teletext

pages.

1.

Press

on the remote control, select

Channel

>

Teletext

>

Digital teletext language

and press

OK/►

to enter.

2.

Press

▲/▼

to select a language and press

OK

to

conrm.

3.

Press to close the menu.

Using Instant Power On

It enables you to turn on your TV faster from standby

mode than turning this function o, but it will also

increase standby power consumption.

1.

Press on the remote control to display the

homepage, Press ▲/◄/► to select

(Settings)

>

Device Preferences

>

Power

>

Instant power on

and press

OK

to toggle between on and o.

2.

Press to return to the homepage.

Network Wake Up

This function allows you to turn on your TV from standby

mode via a network. To use this function, please make

sure:

1.

Your TV is connected to an effective wireless home

network;

2.

The desired controller, such as a smartphone, is

connected to the same network as your TV;

3.

An app which supports network waking up function,

13

Using More of Your TV

issues you should move closer to TV or increase

space between TV and source of interferences.

The Bluetooth word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by TCL is under license. Other trademarks

and trade names are those of their respective owners.

Time Shift

(* not available for some models)

Note

: This option is only available when

Time shift

is

set to

On

: press on the remote control, press

▲/▼ to select

Settings

>

Channel

>

Time shift

,

press

OK

/► to enter and use ▲/▼ to set Time

shift to

On

or

O

.

Allows you to pause, fast forward and rewind live TV,

so you don’t have to miss any part of your favourite

programs. Before you use the function, connect

a USB drive to the TV rst. For the rst time, you

should complete the disk setup for the USB drive.

Press

on the remote control and select

Time shift

,

then press

OK

/► to confirm.

1.

Follow the directions on the screen to do the disk

setup if you use time shift for the first time.

2.

After the disk setup is done, time shift will start, and

the time shift menu displays on the screen.

3.

For later use, press

and select

Time shift

. press

OK

to display the time shift menu and operate

according to the on-screen prompt.

4.

Pressing

STOP

( )

on the remoter control stops the

time shift and exits.

(For RC802V, you can nd on

the virtual remote control keyboard.)

-

When the time shift menu disappears and only the

timing of the time shift remains on the screen, you

can press

OK

to call out the time shift menu.

Notes

:

- Before you plug the USB drive to TV, make sure

you have backed up the data on the drive to avoid

unforeseen malfunction and data loss.

- We recommend that you use a USB drive with at

least 1GB free space and a disk speed faster than

5.0MB/sec.

- The bigger the USB drive free space for time shift,

the bigger the recording length.

Quick Access of Time Shift

Insert a USB disk, press PAUSE (

〓

) on the remote

control, it will access

Time Shift

automatically

(Available for RC802N remote control only)

.

PVR

(Personal Video Recorder)

(* not available for some models)

Allows you to record your favourite TV programs.

Before you use the function, connect a USB drive to

the TV rst.

directly

(if available)

on the remote control, the

Program Guide

menu will appear, which allows you

to get information about the current or next program

playing on each channel. Navigate through the

different programs using the ▲/▼/◄/► buttons on

the remote control.

2.

Use the related buttons shown at the bottom of the

screen to view EPG.

- Program lter

: Program guide lter for digital TV

programs.

• Press to display the type list of the program.

• Navigate through the dierent types using the

▲/▼ buttons on the remote control.

• Select one or more types, which you want to

highlight from the type list, press

OK

to select or

deselect. A checkmark will appear to the right of

the type when selected.

- Custom schedule

: Press ▲/▼ to select a

program, then press the

RED

button to set the

schedule, press

OK

to enter and use ▲/▼ buttons

to select

Schedule reminder

or

Schedule re-

cording

.

- Select date

: Press the

GREEN

button to select

date.

- Schedule list

: Press the

YELLOW

button to view

your schedule list.

Note

: If using RC802V remote control to access the

color buttons, you need to press

button on the

remote control to display the virtual remote control

keyboard rst.

3.

Press to exit EPG.

Bluetooth Function

(* not available for some models)

Bluetooth

®

is a wireless technology standard for

exchanging data over short distance between Bluetooth

devices. You can connect Bluetooth audio device,

mouse or keyboard via the TV.

1.

Press on the remote control to display the

homepage, Press ▲/◄/► to select

(Settings)

>

Remotes & Accessories

and press

OK

to enter.

2.

Select

Add accessory

and press

OK

to enter.

The TV will search nearby Bluetooth devices

automatically.

3.

Select an available device, press

OK

and follow the

guides on the screen to connect it.

Note

: Bluetooth technology (if available in your TV) uses

2.4GHz frequency thus close proximity to Wi-Fi

access points, routers or microwave ovens might

interfere with Bluetooth audio streaming. If you

face interruptions in audio reception, you should

restart your Bluetooth device to nd frequency

with less interferences and if you continue to face

14

Note

: Make sure the smart device and your TV are

in the same home LAN (local area network) or

network segment to use TV remote function.

Reset Shop

Allows you to reset the TV to factory default settings.

1.

Press on the remote control to display the

homepage, Press ▲/◄/► to select

(Settings)

>

Device Preferences

>

Reset

and press

OK

to enter.

2.

Press

▲/▼

to select

Factory data reset

and press

OK

to enter. Then select

Erase everything

and

press

OK

to confirm.

3.

Enter the password

1234

or your own password in

case you have changed the password.

4.

Select

OK

and press

OK

to conrm.

5.

The

Initial setup

wizard appears. Follow the

instructions in the section

Initial setup

.

Netflix

Settings

Netix provides on-demand movies and TV shows

delivered via the Internet. Netix is available in certain

countries. Unlimited membership is required. More

information can be found at www.netix.com <http://

www.netix.com/> .

Note

: You can directly access Netix via pressing the

NETFLIX

button on the remote control.

Password in Parental Control

• The default password is

1234

. You can change it to a

new one.

• The super password is

0423

. If you forget your code,

enter the super password to override any existing

codes.

Note

: The feature is available only in selected products

and, due to specic TV network limitations and

country technical requirements, might not be

available in product or place of installation.

Feature might also be blocked by TV network due

to copyright protection (HD content, recording

protection). Please use

on the remote control

to check if the feature is available in your product.

1.

Press

on the remote control and select

PVR

.

2.

Press

OK

/► to enter and select

Record

. It starts to

record automatically.

3.

Press

BLUE

button to access

Settings

and use

▲/▼/◄/► to adjust the recording duration.

4.

Press

OK

or to stop recording manually, the

recorded file will be saved. In normal operation, the

recording will stop automatically when the recording

duration expires.

Note

: You can nd and color buttons on the virtual

remote control keyboard for RC802V.

5.

In recording, the PVR mini pane will also show on

the screen to indicate the recording progress.

6.

To watch the recorded program, exit PVR mode first.

Press

and select

PVR

>

PVR list

, then select the

related record file. Press

OK

to play.

(It is the same

if you record a digital radio program.)

Notes

:

- This feature is available only for digital non

encrypted channels.

- Before you connect the USB drive to the TV, make

sure you have backed up the data in the drive

to avoid the loss of your important data due to

unforeseen malfunction.

- The bigger the USB drive free memory for the PVR

function, the bigger the recording length.

- If you want to change channel or signal source

during recording, store the recording data before

changing the channel or source.

- The TV cannot play files normally if the parameters

of the file exceed the limitations of the system, the

file format is not supported, the file is damaged, or

the file cannot be decoded.

- Do not disconnect the USB drive when the system

is reading a file or transmitting data, otherwise the

system or the drive may be damaged.

T-cast

T-Cast lets you enjoy plenty of videos

,

rich of applications,

and share great contents on large screen. It also allows

you to turn a smart device into a sophisticated remote

control, providing more features than your normal TV

remote control. You can then control your TV through

your smart device.

Follow the on-screen instructions to scan the QR code

on the TV screen and download T-Cast.

Using More of Your TV

15

Chapter 5 Other Information

6. Video stops playing midway.

-

Mistakes may occur when videos are copied or

compressed, so they may automatically stop playing

during playback.

7. What should I pay attention to, when I do SW

updating?

-

No power cuts when SW updating;

-

Avoid any operations with your remote control when

SW updating;

-

Depending on your internet connection speed, the

software updating process may take some time.

8. There

are no distinct changes of TV interface

after SW updating.

-

Under certain conditions, SW updating may not only

update or add new functions but also improve the

performance of the TV set, without distinct changes

of interface. Also, there may be no changes to the

user interface at all.

9. What should I do when SW updating process

stops due to a sudden power-off?

-

If you do SW updating by USB, do not pluck the

USB from your TV, and restart your TV to continue

SW updating; If you do SW updating by Network,

also restart your TV and check if it is well functioned.

10. With a USB device being inserted into the TV in

advance, I am prompted that no USB devices are

detected after I access Media, why?

-

There may be something wrong with your mobile

hard disk(s), damaged or with low voltage. It's

recommended to provide an additional power supply

to the hard disk(s).

11. External device cannot be recognized.

-

Some external devices (e.g. webcam, smart phone,

tablet, game handle, and external wireless adapter)

may not be compatible with the TV and cannot be

supported for certain functions (nScreen, wireless

display, gesture control, face recognition, if any).

Please try a similar device. If it does not work,

contact your local dealer.

12. Voice search does not work.

-

Check if your remote control has been successfully

paired with your TV.

-

Check if the language setting is correct.

-

Check if Google server is available and stable.

1. Fail to link to the network.

-

Check if your TV is connected with the network;

-

Reboot your TV;

-

Consult your internet service provider, to conrm

if access of your router is supported. Refer to the

operation manual of your router.

-

Make sure your TV is connected to a router, and

make sure your router is powered on. Check that

your router/modem has an internet connection, and

that your Ethernet cables/wireless connection is OK.

Test your connection with a computer to make sure it

is OK. Should the problem persist, contact customer

service.

2. The video could not be played smoothly.

-

Videos from your USB ash drive --- It may result

from data transmission, or its code ow is far beyond

the supported formats of this TV set.

-

Videos downloaded from internet, or online videos.

a. It may be caused by the lower bandwidth of your

network. A high network speed is required to

handle online videos.

b. Peak internet usage times may aect the

bandwidth.

c. Check if any other computers on the same

network are also operating, as they may be using

up bandwidth. Especially if they are downloading

or displaying on-line videos.

d. The video may not be smooth itself, it is not the

problem of your TV or network.

3. When two mobile hard disks are connected

with the TV at the same time, they will not be

recognized some times.

-

All mobile hard disks consume a lot of power,

which may result in power supply problems. We

recommend inserting only one hard disk, or a low

power consumption mobile hard disk.

4. The video from a mobile hard disk (USB) is

playing with no sound.

-

The audio format of the video in your mobile hard

disk is not supported by the TV player.

5. Some videos fail to play.

-

The formats of the videos may not be supported

by the TV, especially videos shot by certain kinds

of cameras, generally with their private protocol of

formats, which are not compatible with your TV.

Problems & Solutions

Note

:

Problems & solutions 1 to 2 are for the TV models which have network functions, so users of non-connected

TV models can disregard them.

16

Other Information

Troubleshooting

Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list.

minimize the interference.

Snowy dots and interference

If the antenna is located in the fringe area of a television

signal where the signal is weak, the picture may be

marred by dots. When the signal is extremely weak,

it may be necessary to install a special antenna to

improve the reception.

1.

Adjust the position and orientation of the indoor/

outdoor antenna.

2.

Check the connection of antenna.

3.

Fine tune the channel.

4.

Try another channel. Broadcasting failure may

happen.

Ignition

Black spots or horizontal streaks appear, or the picture

utters or drifts. This is usually caused by interference

from car ignition system, neon lamps, electric drills, or

other electrical appliance.

Ghost

Ghosts are caused by the television signal following

two paths. One is the direct path, the other is reected

from tall buildings, hills, or other objects. Changing the

direction or position of the antenna may improve the

reception.

Radio frequency interference

This interference produces moving ripples or diagonal

streaks, and in some case, loss of contrast in the

picture. Find out and remove the radio interference

source.

* To bring you better visual experience, please remove

all labels from TV front panel and screen before use.

No picture, no sound

1.

Check if the fuse or circuit breaker is working.

2.

Plug another electrical device into the outlet to make

sure it is working or turned on.

3.

Power plug is in a bad contact with the outlet.

4.

Check the signal source.

No color

1.

Change the color system.

2.

Adjust the saturation.

3.

Try another channel. Black-white program may be

received.

Remote control does not work

1.

Change the batteries.

2.

Batteries are not installed correctly.

No picture, normal sound

1.

Adjust the brightness and contrast.

2.

Broadcasting failure may happen.

Normal picture, no sound

1.

Press the button to increase volume.

2.

Volume is set to mute, press the button to

restore sound.

3.

Change the sound system.

4.

Broadcasting failure may happen.

Unorderly ripples on the picture

It is usually caused by local interference, such as cars,

daylight lamps and hair driers. Adjust the antenna to

17

Other Information

Legal Statement

[Legal Statement] of TCL - manufacturer of this TV set

Due to the various capabilities of products featuring

the SmartTV - Services, as well as limitations in the

available content, certain features, applications, and

services may not be available on all devices or in all

territories. Some features on SmartTV may also require

additional peripheral devices or membership fees that

are sold separately. Please visit our website for more

information on specic device information and content

availability. The services and availability of content

through SmartTV are subject to change from time to

time without prior notice.

All content and services accessible through this device

belong to third parties and are protected by copyright,

patent, trademark and/or other intellectual property

laws. Such content and services are provided solely

for your personal noncommercial use. You may not

use any content or services in a manner that has

not been authorized by the content owner or service

provider. Without limiting the foregoing, unless expressly

authorized by the applicable content owner or service

provider, you may not modify, copy, republish, upload,

post, transmit, translate, sell, create derivative works,

exploit, or distribute in any manner or medium any

content or services displayed through this device.

You expressly acknowledge and agree that use of the

device is at your sole risk and that the entire risk as to

satisfactory quality, performance and accuracy is with

you. The device and all third party content and services

are provided “as is” without warranty of any kind,

either express or implied. TCL expressly disclaims all

warranties and conditions with respect to the device and

any content and services, either express or, implied,

including but not limited to, warranties of merchantability,

of satisfactory quality, tness for a particular purpose, of

accuracy, of quiet enjoyment, and non-infringement of

third party rights. TCL does not guarantee the accuracy,

validity, timeliness, legality, or completeness of any

content or service made available through this device

and does not warrant that the device, content or services

will meet your requirements, or that operation of the

device or services will be uninterrupted or error-free.

Under no circumstances, including negligence, shall

TCL be liable, whether in contract or tort, for any direct,

indirect, incidental, special or consequential damages,

attorney fees, expenses, or any other damages arising

out of, or in connection with, any information contained

in, or as a result of the use of the device, or any content

or service accessed by you or any third party, even if

advised of the possibility of such damages.

Third party services may be changed, suspended,

removed, terminated or interrupted, or access may be

disabled at any time, without notice, and TCL makes no

representation or warranty that any content or service

will remain available for any period of time. Content

and services are transmitted by third parties by means

of networks and transmission facilities over which TCL

has no control. Without limiting the generality of this

disclaimer, TCL expressly disclaims any responsibility or

liability for any change, interruption, disabling, removal

of or suspension of any content or service made

available through this device. TCL may impose limits

on the use of or access to certain services or content,

in any case and without notice or liability. TCL is neither

responsible nor liable for customer service related to

the content and services. Any question or request for

service relating to the content or services should be

made directly to the respective content and service

providers.

18

Other Information

Страница загружается...

TCL L43P8MUS, L43P8US, L50P8MUS, L50P8SUS, L50P8US, L55C8US, L55P8MUS, L55P8US Руководство пользователя

Похожие модели бренда

Модели других брендов