Telefunken TF-LED32S16T2 Руководство пользователя

Бренд: Telefunken

Модель: TF-LED32S16T2

Категория: ЖК-телевизоры

Тип: Руководство пользователя

Table of contents

LED TV/

Телевизор цветного

изображения

жидкокристаллический

(LCD)

TF-LED32S16T2

Instruction manual

Руководство по

эксплуатации

Table of contents

Before you start

Utilization of the product

Important safeguards

Installation

Wall mounting

Stand installation

Connection

Outdoor antenna connection

Other connections

Operation

Control elements

Remote controller

Changing the battery

General operations

Teletext operations

OSD operation

Channel installation

Picture setting

Sound setting

Lock settings

Timer settings

Option settings

USB operation

General information

File playback

CI information

General information

Troubleshooting

Causes of interference

Accessories

Specifications

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read

this manual carefully before connecting, operating and/or adjusting the product and keep

the manual for reference in the future.

Before you start

If you want to dispose of this product, do not mix it with general household waste. There

is a separate collection system for used electronic products in accordance with legislation

that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so,

you will ensure that your disposed product undergoes the necessary treatment, recovery

and recycling and thus prevent potential negative effects on the environment and human

health.

Utilization of the product

Important safeguards

• Before plugging the power cord make sure

that the voltage designation of the LED TV

corresponds to the local electrical supply.

• Please unplug the power cord from the AC

outlet and contact a service center for repair if

the following occurs: any obvious abnormality

appears in the unit, such as smoke, peculiar

smell or strange sound; liquid has been spilled or

other objects have fallen into the unit; no picture

or sound; cover or panel is broken; although you

have operated the unit following the operating

instructions, it still cannot work normally.

• This unit can be connected to a power

supply outlet without the third ground contact

as well as with a ground contact.

• Always disconnect the power cord and

antenna during a storm.

• Do not fix the power cord with a metal nail.

• When connecting or disconnecting cables

to or from TV terminals, make sure the power

is switched off.

• Unplug the power cord from the AC outlet;

also unplug the signal cables from the input

ports when the unit is unused for long periods

of time.

• When pulling the plug, always hold the

wide slot, do not touch the metal part, and do

not destroy, refit, twist, pull or burn the power

cord.

• Please contact the service center

immediately if you found that the cable core is

bare or has been broken.

• Please replace the AC outlet if the metal

bolt cannot be inserted into the power socket

completely or it cannot be fastened even when

it was pushed in, otherwise, any accidents of

shocks and fires would happen.

• Never touch the antenna lie or power plug

if it stars to thunder.

• Do not touch the power plug with wet

hands.

• Do not use any non-rated power socket

with numerous devices jointed on one power

socket or cable device. The wire of non-

designated capacity may cause the fire due to

the generation of heat.

• All instructions must be read and

understood well before you operate the unit.

Heed all warnings and follow all instructions.

• Please use the accessories provided

by the manufacturer. Using inadequate

accessories may result in accidents.

• Please adjust the product through the

panel buttons or the remote controller, do

not remove the cover or attempt to service

the product by yourself. Do not disassemble

back cover and do not make maintenance by

yourself to avoid the electric shock.

• Over-pressing the panel may destroy the

product.

• Do not place the product on an unstable

cart, stand surface, tripod, bracket, or table.

The product may fall, causing serious accidents

as well as the damage to the product.

• Please place the product on a flat surface

in a well-ventilated location. Keep it away from

Before you start

the burning-light, direct sunlight, vibration,

high-temperature and humidity.

• Do not place any vase, potted plant, cup,

medicine and any container with water on this

product. If the liquid is spilt, it may cause the

fire, electric shock or breakdown.

• Do not install it at the place on the strong

magnetic field or current field. It may cause

break down. This equipment may be observed

deterioration of the picture by electromagnetic

radiation in electromagnetic environment.

• Fasten the wheel of the product or shelf

with wheels when installing this product. If it

moves or is tipped over, it may be damaged.

• Do not place any fire source such as

candlelight close to this product or place it on

this product. If it is tipped over or fallen down, it

may cause damage or fire.

• Do not place the unit into closed space

of TV for better ventilation; it can reduce the

product lifetime. Keep a space at least 10 cm

at above, left and right of the TV.

• Please place all the signal cords behind of

rear panel.

• Do not overexert or touch the panel when

you convey the product. Do not transfer the

LED TV up or down display direction.

• Do not transport it with the power cord

connected. If you move this product with the

power cord or the connection cable connected,

the damaged power cord, connection cable

or connection terminal may cause the fire, the

electric shock or breakdown.

• 2 persons or more shall transport the

device, which is heavier than 18 kg. If you drop

or tip over the device, it may damage it.

• The temperature of the product’s body

becomes a little higher after a long period use.

This phenomenon indicates that heat exchange

in normal working mode, thus please do not

let children or anyone who is sensitive of

temperature to touch.

• Please allow at least a 5 hour wait at room

temperature before switching on the power

after transpoting or storing the TV at below

zero temperatures.

All images provided herein are schematic

drawings and may differ from of real objects.

Installation

Wall mounting

For wall mounting the back panel of this unit

is equipped with a VESA slot. A 200*150 mm

VESA wall-mount bracket should be used for

wall mounting. The wall-mounting bracket is not

included and should be acquired separately.

Manufacturer is not responsible for improper

mounting resulting in a damage to the unit.

Stand installation

Cover a flat stable surface with a soft cloth.

Place the TV unit facedown on the cloth. Insert

double support legs and fix them with 4 screws

as shown below.

WARNING

In order to avoid damage, make sure

to secure the unit on the wall

according to the wall mounting

instruction.

Before you start

Connection

Outdoor antenna connection

Use 75Ω cable plug or 300-75Ω impedance

converter to plug in antenna input terminal on

the rear of the cabinet.

Other connections

• Connect the audio sources (Including

DVD, VCDR, CAMCORDER and PC) to the

‘Audio in’ socket.

• Connect the video source to the AV

IN jack by RCA cable (it is shared with the

component jack).

• Component input is intended to receive

component video signal from the external

device. Connection is made with the help of a

special component cable. To receive audio sigl-

nal for component video, please use the audio

input of this unit.

• Plug the power cable in the electric outlet,

making sure the current voltage is supported.

• When using the LED as a computer

screen, connect the PC to the VGA jack from

the monitor by the relevant cable (not included).

• If the video source has a HDMI output

jack, you can connect the signal to the

monitor by the HDMI cable (not included).

Use the HDMI-2(MHL) input to connect your

smartphone via a special cable (not included)

to see the digital content on the TV screen.

• Coaxial SPDIF output is intended for

transmitting multi-channel sound to an external

decoder (e.g. in 5.1-CH format). Coaxial cable

should be used for connection.

• PCMCIA slot is used for CI modules that

are obtained from your digital TV provider.

Please note that AV and component

input (YPbPr) share the same socket so make

sure that if the one or the other input is used,

you choose the corresponding source signal

(press the SOURCE button).

75 Ohm co-axis cable

TVRF antenna jack

Antenna cable connector

Operation

Control elements

1. IR sensor/power indicator

2. Button panel:

PRO + button

POWER/PRO - button

VOL + button

VOL - button

MENU button

3. AC IN power input

4. HDMI1 input

5. Audio input

6. Component/AV input

7. VGA input

8. TVRF antenna socket

9. SPDIF coaxial output

10. USB port

11. CI (PCMCIA) slot

12. HDMI2 (MHL) input

3 4 5 6 7 8

Operation

Remote controller (RC)

1. SOURCE button

2. Number buttons

3. ECO button

4. MENU button

5. Cursor (UP/DOWN/LEFT/RIGHT) buttons/

OK button/ZOOM-/ZOOM+ buttons

6. OPTION button

7. VOL+/VOL- buttons

8. MUTE button

9. TEXT button

10. SUBTITLE button

11. Red button

12. Green button

13. POWER/STANDBY button

14. GUIDE button

15. EXIT button

16. RETURN button

17. INFO button

18. CH+/CH- buttons

19. TV button

20. LIST button

21. LANG/Blue button

22. Yellow button

Changing the battery

1. Remove the battery compartment cover

on the back of the RC.

2. Insert the batteries into the battery

compartment making sure that the correct

polarity is observed.

3. Install the cover back.

• Use two AAA batteries for the RC. The RC

should be pointed at remote sensor within 8

meters and within 30 degrees at the left or the

right side.

• Take the battery out of the RC if it is not

used for a long time.

• Do not mix new and used batteries or

different types of batteries. Weak batteries can

leak and severely damage the RC.

• Do not expose the RC to shock, liquids,

and do not place it in an area with high

humidity.

CAUTION!

Incorrect installation of the batteries may

lead to an explosion.

Please replace used batteries with the

batteries of the same or comparable type.

1 2 3

Operation

General operations

• Connect the terminal of the power cord

to the power cord input of the TV (the position

of the input is given in paragraph Connection

above). Connect the plug of the power cord to

the power supply outlet, the power indicator will

light showing that the unit is in standby mode.

To switch on the unit, press POWER button on

the panel or on the RC; when the TV is on, the

power indicator is off. Press POWER button

again to switch the unit to the standby mode,

the power indicator will light up. To switch off

the unit completely, disconnect the power cord

plug from the power supply outlet.

• Press VOL- button on the unit or on

the RC repeatedly to decrease the volume;

press VOL+ button on the unit or on the RC

repeatedly to increase the volume.

• Press RETURN button on the RC to select

from the present channel and the previously

displayed channel.

• Press MUTE button to mute sound, press

this button again or adjust volume to resume

sound.

• In TV mode press CH+/CH- buttons on the

RC or PRO+/PRO- on the unit to select previous

or next channel; or press number buttons to

enter a channel number directly.

• Press INFO button to display the preset

TV channel information.

• Press ZOOM+/- buttons repeatedly to

select a screen format. Available aspects may

differ for different signal sources.

• Press SOURCE button, then press cursor

buttons on the RC to select a source from

available source list: TV => AV => DTV =>

YPbPr => PC => HDMI1 => HDMI2 => USB;

You can press TV button to access TV source

mode directly.

• Press ECO button on the RC to enter the

energy saving mode.

• Press GUIDE button to access the

electronic program guide in DTV mode.

• Press LIST button to enter the channel list.

• Press SUBTITLE button to enter the subtitle

language menu in DTV mode.

• Press LANG button to enter the audio

language menu in DTV mode.

TELETEXT operations (option)

• Select the TV source mode. Then press

CH-/CH+ buttons to select TV channel in order

to pick up the picture signal of Teletext.

• Teletext button functions are as follows:

TEXT: Press this button to enter into Teletext

mode. Follow the guides on screen and use

the color buttons to navigate the Teletext.

Red/Green/Yellow/Blue buttons: Press

these 4 color buttons to access directly to

corresponding color page displayed at the

lower parts of teletext screen.

Operation

OSD operation

1. Press MENU button to enter the setting

menu displayed on the screen.

2. Press LEFT/RIGHT cursor buttons on the

RC to select setting page.

3. Press OK button on the RC to go to the

parameter list.

4. Press UP/DOWN cursor buttons on the

RC to select a parameter to adjust.

5. Press LEFT/RIGHT cursor buttons on the

RC to adjust the selected parameter.

6. Press MENU button to return to the

previous menu page. Press EXIT button on the

RC to quit the menu.

Some menu items may be in grey color,

in this case they are not adjustable. Pictures

of OSD menu are for reference only; they may

differ from the real screens.

Channel installation

Channel install

Automatic search

Automatic update

Antenna manual installation

Clean channel list

• Automatic Search: this option allows the

TV to search for, find and store all the available

analog and digital channels. Follow all the

steps in turn specified hereafter:

1. Press the Menu button to display the main

menu, and select Setup>Channel install, then

press the OK or right direction button to display

its options.

2.Select Automatic search, then press the

OK or right direction button to enter.

3. Select Digital & Analogue (or Digital or

Analogue), then press the OK or right direction

button to start the automatic search process.

The search may take a few minutes. During the

process, you can press Menu or Exit to abort

halfway.

4. Once the automatic search ends, press

the Menu button to return to the last step or

press OK to restart your channel search.

5. After the automatic search, channels

are arranged in a preset order. You can skip

channels, modify the preset order or rename

channels, select Setup >Organiser and press

the OK or right direction button to enter.

Skipping channels: if a channel was stored

twice or its reception is poor, you can simply

skip it. The skipped channels can not be

selected by pressing the CH+ /CH- buttons.

Select the Channel skip option and press the

OK or right direction button to display Channel

skip menu. Press the up or down direction

button to select a channel and press the OK

button to check the box.

Sorting channels: swaps two channels

position.

1. Select the Channel sort option and press

the OK or right direction button to display

Channel sort menu.

2. Press the up or down direction button to

select a channel, and press OK to confirm.

3. Press the up or down direction button to

select your swapped channel, and press OK to

swap the two channels.

Edit channels: select the Channel edit option

and press the OK or right direction button to

display Channel edit menu. Press the up or

down direction button to select a channel you

want to edit, then press the OK button to enter.

Press the up or down direction button to select

Channel number or Channel name, using

the digit keys to edit the channel number or

channel name, finally press OK to confirm.

When you have finished press Menu to return,

or press Exit to close the menu.

• Automatic Update: This allows you to

update all available channels, without altering

the sorting of existing channels.

1. Display the Channel install menu, press

the up or down direction button to highlight

Automatic update option.

2. Press the OK or right direction button

to start to update the channels. To stop the

update process, press the Menu button.

3. When the search is completed, press

Menu to return, or press OK to restart.

Operation

• Analogue Manual scan:

1. Display the Channel install menu, press

the up or down direction button to highlight

Analogue manual scan, press the OK or right

direction button to enter.

2. Press the up/down/left/right direction and

number or OK button to search, fine tune or

store the channel.

3. Press Menu to return to the previous

menu or press Exit to close the menu.

• Antenna Manual Installation: Allows

you to start manual searching the available

channels from the current frequency or any

frequency you input.(Only for digital channels)

1. Display the Channel install menu, press

the up or down direction button to highlight

Antenna manual installation, press the OK or

right direction button to enter.

2. Press OK to start search from the

current frequency, or use digit keys to input a

frequency, then press OK to start search.

3. When the search is completed, press

Menu to return, or press OK to restart.

• Clean Channel List: Allows you to remove

all the searched channel from the channel list.

1. Display the Channel install menu, press

the up or down direction button to highlight

Clean channel list, press the OK or right

direction button to enter.

2. Press the left or right direction button to

select OK, then press OK to confirm to clean

the channel list.

Picture setting page

Picture

Picture preset

Brightness

Contrast

Saturation

Sharpness

Color Temperature

Screen Mode

Auto Format

ECO Settings

Advanced Settings

Reset

• Picture preset: Standard/Dynamic/Studio/

Personal/Movie.

• Brightness, Contrast, Saturation,

Sharpness: adjust the picture parameters.

• Color temperature: Select color

temperature mode of the picture - Normal/

Warm/Cool/Customer.

• Screen Mode: Select the screen aspect

ratio.

• Auto format: toggle on and off the

automatic format of the picture in TV and AV

modes.

• ECO Settings: select one of the energy

saving modes.

• Advanced Settings: select and edit

more advanced picture settings such as noise

reduction, dynamic contrast and others.

• Reset: revert all picture settings to factory

default values.

Sound setting page

Sound

Sound preset

Balance

Audio Description

Wide Stereo

Sound Type

Auto Volume Control

• Sound preset: Off/Rock/Pop/Live/Dance/

Techno/Classic/Soft/Personal. You can also

adjust frequency ranges yourself to achieve

more personalized sound.

• Balance: adjust balance between left and

right speaker.

• Audio Description: this is an auxiliary

audio function that provides an additional audio

track for visually challenged persons. Users

can turn the Audio Description On or Off and

control the volume.

• Wide Stereo: toggle the wide stereo effect

on or off.

• Sound Type: select a sound type from

the list.

• Auto Volume Control: toggle auto-volume

Operation

control on/off. Volume automatically remains

on the same level of volume if you change

programmes. Because each broadcasting

station has its own signal conditions, volume

adjustment may be needed every time when

the channel is changed. This feature allows

users to enjoy stable volume levels by making

automatic adjustments for each program.

Lock settings

Lock

Channel lock

Parental rating

Input lock

Front panel lock

Installation lock

Max volume

Change password

Clean all

• Channel lock: this option allows you to

lock a certain TV channel. Use the up or down

direction button to select a certain

TV channel you want to lock, then press the

OK button to lock. To unlock, use the same

operation.

• Parental rating: this feature can pre-

vent children watching adult’s TV programs,

according to the rating limit set. This function

appearance according the information from

broadcasting station. Therefore if the signal

has incorrect information, this function does

not operate.

• Input lock: lock/unlock input from external

sources.

• Front panel lock: lock/unlock buttons on

the TV set.

• Installation lock: lock/unlock access to

the channel installation menu.

• Max volume: set the maximum volume

level for programs.

• Change password: this option allows

you to change the password. Press the OK or

right direction button to enter, then press the

number buttons to enter the new password

twice.

• Clean all: unlock all locked channels and

restrictions.

Timer settings

Timer

Time zone

Clock

Sleep timer

Auto standby

• Time zone: select the local time zone.

• Clock: press OK or right direction button

to enter the clock submenu:

Auto synchronization: use the left or right

direction to select On or Off. If On selected,

the TV will get the time automatically from DTV

signals, and the Time item cannot be adjusted.

If you select Off, you should set date and time

at Date and Time item. Highlight Date or Time,

use the left or right direction button to select

input space, enter the current date or time by

using the digit keys.

If Off is selected, the time set in Time

option will not be memorized when turning on

the TV next time, and the TV ‘s time will start

from the default.

Power on timer: use the left or right direction

button to select Once, Daily or Off. If you select

Once or Daily, you should set a time period

after which the TV automatically switches on

at Timer below this item. Highlight Timer, use

the left or right direction to select input space,

enter the on time using the digit keys.

Power on channel: press the OK or the

right direction button to display its submenu.

Highlight Select, use the left or right direction

button to select Last status, the power on

channel will be the last channel you watched

before powering off.

Or you can choose User select, then press

the up or down direction button to select the

channel you want to watch when the TV is

turned on automatically next time, and press

OK to confirm.

Power off timer: use the left or right direction

Operation

button to select Once, Daily or Off. If you select

Once or Daily, you should set a time period

after which the TV automatically switches to off

at Timer below this item. Highlight Timer, use

the left or right direction to select input space,

enter the off time using the digit keys.

• Sleep timer: sets a period of time after

which the TV set goes into standby mode.

Use the left or right direction button to set the

period (120 minutes maximum). To disable this

function, select Off.

• Auto standby: use left and right direction

buttons to set up the auto standby time.

Options settings

Options

Subtitle

SPDIF type

T-link

Common interface

Location

Decoding page language

Digital teletext language

Software update

• Subtitle: this enables subtitle for digital

TV channels. Select Subtitle option, press

the OK or right direction button to display its

submenus:

Subtitle: press the left or right direction

button to turn the subtitles on or off.

Subtitle type: press the left or right direction

button to select a subtitle type. You can

select Hearing impaired to display the hearing

impaired subtitle with your selected language.

• SPDIF type: connect to an audio device

through the SPDIF output. Select Options >

SPDIF type. Select a proper sound type from

the list for digital programs.

- If the current program outputs sound in

Dolby D format, then either PCM or Dolby D

can be selected.

- If the current program does not output

sound in Dolby D format, only PCM can be

selected. Otherwise no sound will be output.

- Select Off to turn off the audio output from

the Audio Device connected to the SPDIF

output.

The options you may choose depend

on the programme you are watching. If you

select PCM and the sound output is prior to the

picture, you can select SPDIF delay from the

Options menu and press the left or right

direction button to adjust the delay time to

synchronize the sound with the picture.

• T-link: to search for CEC devices

connected to the HDMI inputs in your TV and

enable one-touch play and one-touch standby

between CEC devices.

Enable or disable T-Link

1. Press Menu on the remote control, then

select Options > T-Link.

2. Press the left or right direction button to

select On or Off.

Use one-touch play: one-touch play enables

you to press the play button on, for example,

your DVD remote control. This starts playback

on your DVD device and automatically

switches your TV to the correct source,

displaying DVD content.

Use System standby: system standby

enables you to press the standby button on,

for example, your TV remote control. This

switches your TV and all connected HDMI

devices to standby mode.

• Common interface: select this option

to enter the common interface submenu.

Only available when a CI card inserted in the

PCMCIA slot in DTV mode.

• Location: use the left or right direction

button to select Home or Shop mode. Home

mode is the default. If Shop mode selected,

the picture will be displayed in Dynamic mode.

In Shop mode, you can adjust the picture

mode, but when turning on the TV next time,

the Picture preset will restore to Dynamic

mode, and a prompt about Shop mode will

appear.

• Digital page language: Select the

preferred language for digital TV pages.

• Digital teletext language: Select the

preferred Teletext language.

• Software update: Select this option for a

software update and follow the instructions on

screen.

Operation

USB operation

General information

USB file systems supported: FAT32. 2.0

USB version is supported. Maximum capacity

1 TB. For correct and satisfactory operation,

licensed USB devices of well-known brands

should be used with this unit. Avoid using

USB devices of unknown brands. Playback

of images and music of only JPEG and MP3

format is supported. The output capability of

the USB port is 1 A.

• This unit supports playback of video files

with AVI, TS, MP4, MKV, MOV extension,

with video codecs H264/AVC, H263, Divx,

MPEG1/2/4 and audio codecs PCM, DD(AC3),

MP3, AAC.

The above list of extensions and codecs

is for information only and is not a guarantee

that all files having the above extensions and

codecs should be read by this unit.

• Some AVI files cannot be played due to

their parameters and recording conditions.

Video files with AVI extension exceeding 2 GB

in size may be played partially.

According to the USB 1.1/2.0 Standard,

usage of a USB device with power current

consumption exceeding 500 mA is not

recommended without supplementary power

supply. Failure to use supplementary power for

connected USB drives with power consumption

exceeding this value as well as defective

USB drives may cause mechanical or thermal

changes of elements of this unit as well as

failure of internal elements of the USB port.

Such damages are not warrantee cases.

Warning: usage of external USB drives

containing BIN files in the root directory may

cause malfunction of the unit or damage to the

software.

File playback

Insert a USB into the USB jack. Press MENU

button, select Media option and press OK

button. The screen will show USB playback

menu:

Media center

Photo

Music

Video

• Video file playback: Select Video item

and press OK button. Press cursor buttons

to select a file and press OK button to start

playback. During playback press MENU but-

ton to show playback menu in which you can

select an operation by LEFT/RIGHT cursor

buttons and perform this operation by press-

ing OK button. The operations include Play/

Pause, Backward, Forward, Prev., Next, Stop,

Repeat Mode, AB Repeat setting, Playlist,

Info., Slow Forward, Step Forward, Goto

Time, Brightness, Contrast, Zoom out, Zoom

in, Scale, Move View. To exit video playback

press EXIT button.

• Image file playback: Select Photo item

and press OK button. Press cursor buttons

to select a file and press OK button to start

playback. During playback press MENU but-

ton to show playback menu in which you can

select an operation by LEFT/RIGHT cursor

buttons and perform this operation by pressing

OK button. The operations include Play/Pause,

Prev., Next, Stop, Rotate Right, Rotate Left,

Music(on/off), Musiclist, Zoom in, Zoom out,

Repeat Mode, Capture and Info. To exit photo

playback press EXIT button.

• Audio file playback: Select Music item and

press OK button. Press cursor buttons to select

a file and press OK button to start playback.

During playback press MENU button to show

playback menu in which you can select an

operation by LEFT/RIGHT cursor buttons and

perform this operation by pressing OK button.

The operations include Play/Pause,Backward,

Forward, Prev., Next, Stop, Repeat Mode, Mute,

Playlist, Info. and Goto Time. To exit music

playback press EXIT button.

CI Information

(only in DTV mode): This function enables

you to watch some encrypted services (pay

services). Please insert a CI card into the

Operation

PCMCIA slot according to the arrow on the CI

card.

The function can only be available when

CI card is present.

• It is possible for you to change CI

(Common Interface) menu screen and service

by consulting your dealer.

• Please do not insert or pull out the CI card

when power on. During initialization of the CI

card, please don’t operate the TV.

• Do not insert or pull out the CI card

frequently so as to avoid any damages of the

TV and the CI card.

• If there is no picture and/or sound with the

CI+ CAM module inserted, please contact the

customer support of the service provider.

Operation

General information

Troubleshooting

Below is a table describing simple measures that can help you eliminate most problems likely

to emerge when this unit is in use. If below measures do not help, turn to a service center or to the

nearest dealer.

Symptom Cause Solution

No picture, no

sound, and no

indicator light

The power cord is not plugged in.

Contrast, brightness, color and

volume are all in the minimum value

or TV is in mute mode.

Plug the power cord in.

Alter the value of contrast,

brightness, color and volume.

Picture and

sound with

abnormity

Contrast and color are set improperly.

Color system is set improperly.

Sound system is set improperly.

Set the value of Contrast and color

properly.

Set the sound system properly.

Picture is spotted

or with snow

Signal source is low-grade or the

signal is in a lower quality.

Use the qualified signal cord.

The picture in

VGA mode is

abnormal

The PC settings may be improper. Check and set the resolution

parameters of your PC.

Picture is split in

two parts

Either AV or component input is

chosen as a source.

Choose the correct source mode

depending on the cable you use (AV

or component)

Blue background No video signal or the signal cord is

improperly/not connected.

Connect the signal cord properly.

No sound No audio signal or the signal cord is

improperly/not connected.

Connect the audio signal cord

properly.

Set the sound system properly.

The RC does not

work

Batteries are improperly installed or

exhausted.

Make sure the positive and the

negative polarities are correct.

Reattach the battery lid.

Replace the batteries.

Causes of interference

Incorporated in your TV receiver are the most up-to-date devices to eliminate interference.

Local radiation however, can create disturbances, which visibly affect your picture. Proper

installations, a good aerial are your best safeguards against these disturbances.

• RF INTERFERENCE: Moving ripples across the screen are caused by nearby transmitting or

receiving short-wave radio equipment.

• DIATHERMY: Herringbone pattern and partial picture loss can result from the operation of

diathermy equipment from a nearby doctor’s surgery or hospital.

• SNOW: Weak TV signals from long distant stations result in an instead picture and give the

effect of falling snow. An antenna adjustment or antenna amplifier may be needed.

• GHOST: Multiple image, caused by TV signals reflected back from surrounding buildings,

hills, aircraft, etc. is minimized by correct aerial positioning.

• CAR IGNITION: Nearby cars and electrical motors can cause small streaks across the picture

or make the picture roll.

General information

Accessories

Specifications

Size (diagonal) 31.5” (80 cm)

Response time 6.5 ms

Resolution 1366 x 768

Aspect ratio 16:9

View angle (Horizontal/Vertical) 178

/178

Color system PAL, SECAM

Sound system B/G, DK

NICAM Stereo 2 x 5 W

Digital coaxial audio output (SPDIF) +

Component video in +

AV in (paired with Component) +

USB port +

VGA +

HDMI x2

MHL function +

DVB-T/DVB-T2/DVB-C signal reception +

PCMCIA slot (CI, CI+ support) +

Russian and English OSD +

Progressive scan +

Digital comb filter +

Sleep timer +

Number of channels 1500

Electric shock protection class II

Nominal voltage range: ~110–240 V; 50/60 Hz;

Unit dimensions: with stand 736 x 483 x 177 mm

without stand 736 x 432.2 x 81 mm

Net weight 4.8 kg

The LCD panel is a high technology product with many thin film transistors that can

give you a fine picture details. Occasionally, a few non-active pixels may appear on the screen

as a fixed point of blue, green, red, black or white, please note that this does not affect the

performance of your LCD TV.

Warning: For the sake of improvement, unit specifications may be subject to change without

prior notice.

1. LED TV 1 pc

2. Remote controller 1 pc

3. Battery 2 pcs

4. Stand legs 2 pcs

5. Screw 4 pcs

6. Power cable 1 pc

7. AV-cable 1 pc

8. Consumer information 1 pc

9. Warranty card 1 pc

10. Instruction manual 1 pc

Operating conditions

Ambient temperature

Relative humidity

Atmospheric pressure

from 5 to 35

from 45 to 75%

from 86 to 106 kPa

(650-800 mm Hg)

Содержание

Уважаемый покупатель!

Благодарим Вас за покупку нашего изделия. Чтобы понять, как правильно и безо-

пасно пользоваться приобретенным устройством, рекомендуется тщательно изучить

настоящее руководство перед подключением и эксплуатацией изделия. Сохраняйте

руководство для использования в будущем.

Содержание

Перед началом эксплуатации

Утилизация изделия

Меры предосторожности

Установка

Крепление на стену

Установка на подставку

Подключение

Подключение внешней антенны

Прочие подключения

Управление устройством

Элементы управления

Пульт дистанционного управления

Установка батареек

Общие операции

Операции с телетекстом

Экранное меню

Установка каналов

Настройка изображения

Настройка звука

Настройка блокировки

Настройка таймера

Настройка опций

Операции с USB

Общая информация

Воспроизведение файлов

Интерфейс CI

Общая информация

Руководство по устранению

неисправностей

Источники помех

Комплект поставки

Технические характеристики

Перед началом эксплуатации

Если вы желаете утилизировать данное изделие, не выбрасывайте его вместе с

обычным бытовым мусором. Существует отдельная система сбора использованных

электронных изделий в соответствии с законодательством, которая предполагает

соответствующее обращение, возврат и переработку.

Обращайтесь в органы местного управления за инструкциями по правильной

утилизации продукта. Тем самым Вы обеспечите утилизацию Вашего изделия с

соблюдением обязательных процедур по обработке, утилизации и вторичной пере-

работке и, таким образом, предотвратите потенциальное негативное воздействие на

окружающую среду и здоровье людей.

Утилизация изделия

Меры предосторожности

• Перед подсоединением кабеля питания

к телевизору убедитесь, что напряжение

устройства соответствует напряжению

электрической сети.

• Пожалуйста, извлеките шнур пита-

ния из розетки и свяжитесь с сервисной

службой в следующих случаях: если в

устройстве имеются явные неисправности,

например, из него идет дым, чувствуется

специфический запах или слышен неха-

рактерный звук; если внутрь устройства

попала жидкость или посторонние предме-

ты; если нет изображения или звука; если

поврежден корпус или панель; если Вы

пользуетесь устройством согласно инструк-

ции, но оно не работает должным образом.

• Данное изделие может подключаться

к розетке питания как без заземляющего

третьего контакта, так и с заземляющим

третьим контактом.

• Во избежание поражения электриче-

ским током защищайте шнур питания от

возможного нажатия на него или защемле-

ния, особенно рядом с разъемами.

• Не закрепляйте шнур питания метизами.

• Если Вы не пользуетесь устройством

длительное время или в случае грозы,

обязательно отключайте шнур питания из

розетки, а также отключайте все сигналь-

ные кабели от входных разъемов.

• При подключении или отключении

кабелей обязательно удостоверьтесь в том,

что питание устройства выключено.

• При отключении вилки из розетки всег-

да держитесь за утолщение на вилке, не

касайтесь металлических частей, не тяните

за шнур, не ломайте и не перегибайте его,

не ремонтируйте, не перекручивайте и не

нагревайте.

• Немедленно свяжитесь с сервисным

центром, в случае если имеются какие-либо

неисправности шнура питания, в нем оголи-

лись жилы или он поврежден.

• Замените сетевую розетку, если в

нее невозможно вставить вилку или вилка

плохо закрепляется в розетке. Иначе могут

возникнуть неисправности, или произойти

несчастные случаи или возгорания.

• Не прикасайтесь к проводам мокрыми

руками.

• Запрещается использование розетки, в

которую подключено несколько устройств.

Перегрузка такой розетки может привести

к пожару.

• Место подключения вилки шнура

питания к сети 220 В должно оставаться

легкодоступным.

• Перед работой с устройством необ-

Перед началом эксплуатации

ходимо полностью прочитать и понять все

инструкции. Необходимо соблюдать все пред-

упреждения и следовать всем инструкциям,

приведенным в настоящем руководстве.

• Пожалуйста, используйте только реко-

мендованные производителем аксессуары.

Использование других аксессуаров может

привести к неисправностям.

• Пожалуйста, проводите все настройки

и регулировки только с помощью кнопок

на боковой панели или на пульте дистан-

ционного управления. Ни в коем случае не

снимайте заднюю панель и не пытайтесь

самостоятельно проводить техническое об-

служивание устройства, так как существует

опасность поражения электрическим током,

а также возможно возникновение неисправ-

ностей.

• Не устанавливайте устройство на

непрочные или неровные поверхности,

тележки, стойки, треноги, кронштейны

или столы. Устройство может упасть, в

результате чего могут возникнуть неисправ-

ности или произойти несчастные случаи.

Используйте только те приспособления,

которые рекомендованы производителем

или продавцом.

• Пожалуйста, устанавливайте устрой-

ство на горизонтальной поверхности в ме-

стах с хорошей вентиляцией. Не допускайте

воздействия на устройство вибрации, пря-

мого солнечного света, высокой температу-

ры, а также попадания пыли и влаги.

• Не ставьте на устройство вазы, сосуды

с жидкостью. Попадание жидкости внутрь

аппарата может привести к пожару или по-

ломке устройства.

• Не устанавливайте устройство в зоне

магнитных волн. Это может привести к по-

ломке устройства. В зоне электромагнитно-

го излучения может наблюдаться искаже-

ние изображения.

• Не устанавливайте вблизи устройства

источники открытого огня, например, свечи.

В случае их падения устройство может быть

повреждено или может произойти возгора-

ние.

• Установка телевизора в замкнутое

пространство при эксплуатации может со-

кратить срок службы устройства; поэтому

необходимо обеспечить минимальную

дистанцию между LCD-телевизором и

внутренними границами приспособления

под аппарат для нормальной вентиляции

(минимум по 10 см свободного простран-

ства со всех сторон).

• Располагайте кабели позади устрой-

ства. Не закрепляйте их метизами, не пере-

гибайте, не ремонтируйте и не нагревайте.

• При перемещении телевизора не

нажимайте и не касайтесь панели. Не пере-

носите телевизор в положении, при котором

экран направлен вверх или вниз.

• Не перемещайте устройство при под-

ключенном проводе питания или других

подключенных проводах. Повреждение про-

вода питания, подключенный провод или

подключенные устройства могут стать при-

чиной пожара, электрошока или поломки.

• Если устройство тяжелее 18 кг, его

должны перемещать не менее 2 человек.

При падении устройство может повредиться.

• Слишком сильное нажатие на панель

может повредить устройство.

• При длительном использовании может

немного повыситься температура корпуса

устройства. Это явление свидетельствует о

теплоотдаче в нормальном рабочем режи-

ме. Однако не позволяйте детям и людям с

повышенной температурной чувствительно-

стью касаться устройства.

• Время выдержки телевизора при ком-

натной температуре до включения питания

после транспортирования или хранения

при пониженной температуре окружающей

среды должно быть не менее 5 часов.

Все иллюстрации, приведенные в на-

стоящем руководстве, являются схе-

матическими изображениями, которые

могут отличаться от реальных объектов.

Перед началом эксплуатации

Установка/Подключение

Установка

Крепление на стену

Для крепления на стену на задней панели

телевизора имеются отверстия стандарта

VESA (расстояние между отверстиями: 200

х 150 мм). Используйте эти отверстия, что-

бы прикрепить панель телевизора к настен-

ному кронштейну (кронштейн в комплект

поставки не входит и приобретается отдель-

но). Производитель не несет ответственно-

сти за неправильно выполненный монтаж,

повлекший повреждение телевизора.

Установка на подставку

Выберите ровную плоскую горизонталь-

ную поверхность, накройте ее мягкой тка-

нью и разместите на ней корпус телевизора

экраном вниз. Присоедините ножки-под-

ставки таким образом, чтобы отверстия в

подставках и в корпусе телевизора совпа-

дали. Зафиксируйте с помощью 4 винтов.

ПРЕДУПРЕЖДЕНИЕ

Во избежание повреждений надежно

закрепите аппарат на стене в

соответствии с требованиями

инструкции по установке.

Страница загружается ...

Telefunken TF-LED32S16T2 Руководство пользователя

Бренд: Telefunken

Модель: TF-LED32S16T2

Категория: ЖК-телевизоры

Тип: Руководство пользователя

Скачать PDF

сообщить о нарушении

на других языках

English: Telefunken TF-LED32S16T2 User manual

Telefunken TF-LED32S16T2 Руководство пользователя

Telefunken TF-LED32S16T2 Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов