Hyundai Excellence H-CMD7080 Руководство пользователя

DVD/CD/MP3-РЕСИВЕРDVD/CD/MP3 RECEIVER

Руководство по эксплуатации Instruction manual

H-CMD7080

Downloaded from Caradio-Manual.com Manuals

2 3

Table of contents Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read

this manual carefully before connecting, operating and/or adjusting the product and keep

the manual for reference in the future.

13

14

15

16

17

18

Table of contents

Before you start

Utilization of the product

Important safeguards

Installation/Connection

Installation

General notes

Din Front/Rear-Mount

1. DIN front-mount (Method A)

Dismantling the unit

Trim frame installation

2. DIN rear-mount (Method B)

Detachable control panel

Anti-theft system

Connection

Connection diagram

ISO connection table

Parking wire connection

Operation

Control elements

Front panel

Inner panel

Remote controller

Changing battery

LCD layout

General operations

Turning on/off

Volume control

Mute function

Audio parameter setting

Equalizer (DSP) setting

Loudness

Beep

Mode setting

Dual zone function

AV in jack

Display

Subwoofer

Radio operations

2

4

5

6

7

8

9

10

11

12

13

Band selection

Manual/Auto tuning

Programming preset stations

Auto memory store

Preset scan

RDS function

AF (Alternative Frequencies)

function

TA (Traffic Alarm)/TP function

PTY (Program Type)

REG (regional) function

Mono/Stereo control

Local radio station search

Other parameter setting

Disc/USB/SD/MMC operations

USB/SD/MMC notes

Insert/Eject disc

Inserting an SD/MMC card/

USB device

Play/pause

MP3/WMA/DivX/JPEG file playback

Stop playback

Selecting tracks

Fast forward/rewind

A-B segment repeat

Repeat playback

Intro playback

Random playback

Programming playback

OSD function

Zooming in/out

GOTO

Changing angle

Selecting audio language

Selecting subtitle language

Selecting sound channel

PBC function

Menu navigation

ID3 tag information

Downloaded from Caradio-Manual.com Manuals

Notes on MP3 and WMA

Notes on creating your own CD-Rs

or CD-RWs containing MP3 files

System setup

Language setup

Audio setup

Video setup

Digital setup

General information

Handling compact discs

Cleaning discs

Cleaning the unit body

Accessories

Troubleshooting guide

Specification

2 3

Table of contents Table of contents

18

19

20

21

22

23

Downloaded from Caradio-Manual.com Manuals

4

Before you start

If you want to dispose this product, do not mix it with general household waste. There is

a separate collection system for used electronic products in accordance with legislation

that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so, you

will ensure that your disposed product undergoes the necessary treatment, recovery and

recycling and thus prevent potential negative effects on the environment and human health.

Utilization of the product

Important safeguards

• Read carefully through the manual to

familiarize yourself with this unit.

• Keep this manual handy as a reference

for operating procedures and precautions. Do

not allow persons who have not read through

this manual to use this unit.

• “CLASS 1 LASER PRODUCT”

This product contains a laser diode of

higher class than 1. Laser beams from the

optical pickup are dangerous to the eyes. To

ensure continued safety, do not remove any

covers or attempt to gain access to the inside

of the product. Refer all servicing to qualified

personnel.

• Do not allow this unit to come into contact

with liquids. Electrical shock could result. Also,

damage to this unit, smoke, and overheating

could result from contact with liquids or dust.

Protect this unit from moisture.

• Make sure that foreign objects do not get

inside the unit; they may cause malfunctions,

or create safety hazards such as electrical

shock or laser beam exposure.

• The beginning of operation is the moment

of the unit installation. Before use the device

in winter it is recommended to heat up the

passenger compartment during 20 seconds or

to the operation temperature.

• Using the unit with the temperature that

goes beyond the operation temperature greatly

decreases the operation resource of the screen

and other components of the unit and can

result in an outage.

• Disconnect the vehicle’s negative battery

terminal while mounting and connecting the

unit.

• The unit is designed for negative

terminal of the battery, which is connected

to the vehicle metal. Please ensure it before

installation.

• When replacing the fuse, be sure to use

one with an identical amperage rating. Using a

fuse with a higher amperage rating may cause

serious damage to the unit.

• Do not allow the speaker wires to be

shorted together when the unit is switched

on. Otherwise it may overload or burn out the

power amplifier.

• Make sure you disconnect the power supply

and aerial if you will not be using the system

for a long period or during a thunderstorm.

• Make sure you disconnect the power supply

if the system appears to be working incorrectly,

is making an unusual sound, has a strange

smell, has smoke emitting from it or liquids

have got inside it. Let a qualified technician

check the system.

• Always keep the volume low enough so that

you can hear sounds from outside the vehicle.

• Should this product fail to operate properly,

contact your dealer or nearest service center.

Downloaded from Caradio-Manual.com Manuals

5

Installation/Connection

Installation

General notes

• Choose the mounting location where the

unit will not interfere with the normal driving

function of the driver.

• Before finally installing the unit, connect

the wiring and make sure that the unit works

properly.

• Consult with your nearest dealer if

installation requires the drilling of holes or other

modifications of the vehicle.

• Install the unit where it does not get in the

driver’s way and cannot injure the passenger if

there is a sudden stop, like an emergency stop.

• If installation angle exceeds 30° from

horizontal, the unit may not perform properly.

• Avoid installing the unit where it would

be subject to high temperature, such as from

direct sunlight, or from hot air, from the heater,

or where it would be subject to dust, dirt or

excessive vibration.

Din Front/Rear-Mount

This unit can be properly installed either

from ‘Front’ (conventional DIN Front-mount) or

‘Rear’ (DIN Rear-mount installation, utilizing

threaded screw Holes at the sides of the unit

chassis). For details, refer to the following

illustrated installation methods.

1. DIN front-mount (Method A)

1. Car dashboard

2. Sleeve

3. Screw

4. Nut (5 mm)

5. Spring washer

6. Screw (5 х 25 mm)

7. Metal strap

8. Flat washer

3

2

1

182

53

1. Install the sleeve into the dashboard;

ensure it is installed with the correct side and

there are no obstacles (wires, dashboard

elements, etc) for the unit installation.

2. After installing the sleeve into the

dashboard, bend tabs fitting to the size of the

dashboard to fix the sleeve in place.

3. Use the metal strap to fix the rear side of

the unit. Determine a place for fixing and install

the strap as shown in the picture. You can bend

the strap to the needed angle with your hands.

4. Make the necessary wire connections.

Ensure the connections are correct.

5. Install the unit into the sleeve until the side

locks are fixed.

3

5

4

6

8

1

7

Dismantling the unit

a – Trim frame

b – Frame uninstall direction

c – Release key insertion

Downloaded from Caradio-Manual.com Manuals

6

Installation/Connection

в

б

а

1. Switch off the unit and detach the front

panel.

2. Insert your fingers into the groove in the

front side of the trim frame (apply some effort to

detach the frame). Pull the frame to detach it.

3. Insert the supplied release keys into the

both sides of the unit body to click, as shown

in the picture. To extract the unit from the

dashboard, pull the release keys or the unit

body to pull it out. Before detaching the unit,

ensure it is not fixed with the metal strap.

Trim frame installation

To install the trim frame, press it to the unit

body and push it to fix it in place. This should

be done before installing the front panel;

otherwise you are not able to install the trim

frame. When the trim frame being installed,

the side with the groove should face down and

fixed first.

2. DIN rear-mount (Method B)

For this method, use the screw holes in the

lateral sides of the unit. Fix the unit with the

help of the factory radio mounting brackets.

1. Select a position in which the screw holes

of the brackets (3) are aligned with the screw

holes in the unit body, and screw in two screws

(2) in each side.

2. Screw.

3. Factory radio mounting brackets.

4. Vehicle dashboard.

5. Lock (remove this part).

The outer trim frame and mounting

sleeve are not used for method of installation.

2

5

4

3

Detachable control panel

Insert the left locker of the body into the fixing

hle on the side of the panel, then insert the right

locker into the right hole of the panel. Press on

the upper part of the panel until a click.

To detach the front panel, press OPEN

button. Hold the panel at 45 degree angle and

push it to the left to detach the right locker.

Then detach the left locker.

The control panel can easily be

damaged by shocks. After removing it, place

it in a protective case and be careful not to

drop it or subject it to strong shocks. The rear

connector that connects the main unit and the

control panel is an extremely important part. Be

careful not to damage it by pressing on it with

fingernails, pens, screwdrivers, etc.

If the control panel is dirty, wipe off the

dirt with soft, dry cloth only. And use a cotton

swab soaked in isopropyl alcohol to clean the

socket on the back of the control panel.

Anti-theft system

The front panel of this unit can be stored in

the included protective case when not in used

and carried away when you leave the vehicle

to deter theft.

Switch off the power of the unit. Detach the

front panel, then put it to the protective case

and take it with you.

Downloaded from Caradio-Manual.com Manuals

7

Installation/Connection

Connection

Connection diagram

Connector A

1. -

2. -

3. -

4. Memory +12V

5. Auto antenna output

6. To dimmer control

7. +12V (to ignition key)

8. Ground

Connector B

1. Rear right speaker (+)

2. Rear right speaker (-)

3. Front right speaker (+)

4. Front right speaker (-)

5. Front left speaker (+)

6. Front left speaker (-)

7. Rear left speaker (+)

8. Rear left speaker (-)

ISO connector

DVD video RCA out (yellow) Red-Right Red-Right

Line out

Grey-Front

Line out

Brown-Rear

DVD audio RCA out (white-left)

DVD audio RCA out (red-right) White-Left White-Left

Parking (brown)

Subwoofer out (blue)

Antenna jack

ISO connection table

Location

1

2

3

4

5

6

7

8

Connector A

Battery 12V (+)/yellow

Power Antenna/Blue

Dimmer/Orange

ACC+/Red

Ground/Black

Connector B

Rear Right(+)---Violet

Rear Right(-)---Violet/Black Stripe

Front Right(+)---Grey

Front Right(-)---Grey/Black Stripe

Front Left(+)---White

Front Left((-)---White/Black Stripe

Rear Left(+)---Green

Rear Left(-)---Green/Black Stripe

Function

Power antenna wire is intended for power supply of the antenna and for remote control of

an additional amplifier.

Downloaded from Caradio-Manual.com Manuals

8 9

Installation/Connection Operation

Parking wire connection

Parking brake

Parking brake switch

(activated by parking brake)

To metal body part of chassis body of your car

Parking brake

indicator light

Parking brake wire (brown) from Car DVD player

Car battery

The parking wire is connected with brake signal; for safety, the video programs should only

be viewed after car’s breaks are engaged. Check and follow your local authority’s regulations

regarding watching video in a car.

Downloaded from Caradio-Manual.com Manuals

8 9

Installation/Connection Operation

Control elements

Front panel

1. PWR/MUTE button

2. MODE button

3. VOLUME knob

4. button

5. Display

6. MEM button

1 2 3 4 5 6 7 8

13 12 11 10 9

7. OK button

8. OPEN button

9. USB slot

10. AV in jack

11. button

12. BAND button

13. MENU button

Inner panel

1 2 3 54

1. SD/MMC memory card slot

2. EJECT button

3. Panel status indicator

4. RESET button (hole)

5. Disc slot

Pressing RESET hole will erase the

clock setting and stored stations.

Panel status indicator lights up when you

slide the panel down, flashes when you remove

the panel.

Downloaded from Caradio-Manual.com Manuals

10

Operation

Remote controller

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

1. DUAL/DISP button

2. STANDBY button

3. ST/MO button

4. OSD button

5. SETUP button

6.

/ / / cursor buttons/ENTER button

7. button

8. ANGLE button

9. VOL+/VOL- button

10. SEL button

11. RDM/BAND button

12. GOTO/AUDIO button

13. Number buttons

14. TITLE button

15. DSP button

16. MUTE button

17. MODE button

18. MENU button

19.

button

20.

button

21. INT button

22. PBC/ button

23. ZOOM/A-B button

24. SUB-T button

25. PROG/PTY button

26. RPT/P.SCN button

Changing the battery

1. Press the catch and at the same time pull

out the battery tray.

2. Insert the 1 x lithium battery, type CR

2025 3V with (+) mark facing up. Insert the

battery tray into the remote control.

Downloaded from Caradio-Manual.com Manuals

11

Operation

15. Repeat playback indicator

16. Not active

17. Random playback indicator

18. Subwoofer indicator

19. Equalizer graphic indicator

20. AF function indicator

21. TA function indicator

22. TP function indicator

23. PTY function indicator

24. EON function indicator

25. Loudness indicator

26. REG function indicator

27. DVD playback indicator

28. VCD playback indicator

29. DUAL zone mode indicator

LCD layout

1 2 3 4 5 6 7 8 9 10

11

12

13

14

15

16

17

18

26

27

28

29

19 20 21 22 23 24 25

1. Local reception indicator

2. Mute function indicator

3. Stereo reception indicator

4. MP3 playback indicator

5. WMA playback indicator

6. Disc playback indicator

7. Not active

8. Track indicator

9. Chapter indicator

10. Title indicator

11. Equalizer mode indicator

12. Intro playback indicator

13. USB connection indicator

14. Memory card connection indicator

Downloaded from Caradio-Manual.com Manuals

12 13

Operation Operation

General operations

Turning on/off

Press any button (except OPEN button) on

the panel or the RC to turn on the unit. Press

and hold PWR button on the panel or press

STANDBY button on the RC to switch the unit off.

After the unit is off, the volume level

and radio current settings will be memorized,

and when you turn the unit on it will resume

the stored status you previously set. To protect

your ear from too loud sound, the unit volume

level will turns to 40 automatically when you

turn the unit on if currect volume level setting is

above 40 when your turn the unit off.

Volume control

Rotate VOLUME knob or press VOL+/VOL-

buttons on the RC to adjust the volume level.

Mute function

Press PWR/MUTE button on the panel or

MUTE button on the RC to turn the sound off.

Press it again to turn the sound on.

Audio parameter setting

Press MENU button on the panel or RC to

select SOUND. Press OK button on the panel

or ENTER button on the RC to enter SOUND

setting mode. Press MENU button repeatedly

to select the audio settings: VOLUME =>

BASS => TREBLE => BALANCE => FADER.

Or press repeatedly SEL button on the RC

to select the audio settings. Rotate VOLUME

knob or press VOL+/VOL- buttons on the RC to

adjust each parameter.

If the unit is turned off, all the settings of

each mode will be saved. If cutting off battery

power or resetting the unit, all the settings will

return to factory default settings.

Equalizer (DSP) setting

Press MENU button on the panel or RC to

select EQ. Press OK button on the panel or

ENTER button on the RC to enter EQ setting

mode. Press MENU button repeatedly to select

a DSP mode: FLAT => CLASSICS => POP =>

ROCK => DSP OFF.

Or press DSP button on the RC repeatedly

to select a DSP mode.

Loudness

Press and hold BAND button on the front

panel to switch LOUD function on. LOUD

function is to emphasize the bass output.

Beep

Press repeatedly MENU button on the panel

or RC to select EXPERT. Press OK button

on the panel or ENTER button on the RC to

enter EXPERT setting mode. Press MENU

button repeatedly to choose BEEP ON (BEEP

OFF/BEEP 2ND); rotate VOLUME knob or

press VOL+/VOL- buttons on the RC to toggle

between BEEP ON (beep sound will be heard

when buttons are pressed), BEEP 2ND (beep

sound will be heard when buttons are pressed

and held) and BEEP OFF (no beep sound for

button pressing).

Mode setting

Press MODE button to select between unit

operation modes: TUNER => CD => USB =>

SD => AUX (AV input).

USB, SD, DISC modes will only be

available when a USB device, memory card or

a disc is inserted into the unit.

Dual zone function

Press and hold MENU button on front

panel or DUAL/DISP button on the RC to set

DUAL ON/OFF. When DUAL is on, you can

set buttons as CURRENT or DUAL KEY in

EXPERT menu.

Press repeatedly MENU button on the panel

or RC to select EXPERT. Press OK button on

the panel or ENTER button on the RC to enter

EXPERT setting mode. Press MENU button

repeatedly to choose CURRENT (DUAL KEY);

rotate VOLUME knob or press VOL+/VOL-

buttons on the RC to toggle between CURRENT

(all the buttons are used only for current front

zone operation) and DUAL KEY (all the buttons

Downloaded from Caradio-Manual.com Manuals

12 13

Operation Operation

are used only for rear zone operation).

Please note that for DUAL ZONE mode

an additional display and an amplifier with

acoustics should be connected to this unit. Or

you can use a car TV set with built-in speakers.

AV in jack

AV jack is intended to receive audio and video

signals by connecting to external device.

Display

Press DUAL/DISP button on the RC to

display current tuning information and time.

In Radio mode, display menu: Clock/Time

=> PTY => Radio Frequency => PS (Program

Service, if available) => Exit Display.

In Disc/USB/SD mode, except the above

menu, it will also show ID3 information if the file

with ID3 tags.

Subwoofer

Press and hold MODE button to enable or

disable subwoofer. For subwoofer operation an

external amplifier is required.

Radio operations

Band selection

Press repeatedly BAND button on the panel

or RDM/BAND button on the RC to select your

desired radio band in RADIO mode: FM1, FM2,

FM3, AM1 (MW1), AM2 (MW2). In each set of

the bands you can store up to 6 preset stations,

making total 30 preset memory stations.

Manual/automatic tuning

Manual tuning: To find a station, select a

band first, then press and hold / buttons

on the RC until MANUAL appears on the

display, then press these buttons repeatedly

to search for the needed frequency upward or

downward.

Automatic tuning: To find a station, select a

band first, then press and hold / buttons

on the panel or press / buttons on the

RC, the automatic downward/upward search

will start. It will play when a station is found.

Programming preset stations

• To store a station: Select a band (if

needed); find a station by manual/automatic

tuning. Then press MEM button and rotate

VOLUME knob to choose a memory position

(1-6), and finally press OK button to confirm.

Or, after finding a station, press and hold a

number button (1-6) on the RC to save the

station in the corresponding memory position.

• To recall a station: Select a band (if

needed); press MEM button on panel, then rotate

VOL knob to choose (1-6), and finally press OK

button to confirm the needed station. Or press a

number button (1-6) on the RC to call the station

saved in the corresponding position.

Auto memory store

Select a band, press and hold RPT/P.SCAN

button on the RC to enter auto store mode.

The radio will automatically store 6 stations to

the 6 preset memories of the current band. To

stop auto store, press this button again.

During auto station preset, the unit will

search and store stations with the strong signal

first, and then weaker signal stations until the

memories are full.

Preset scan

Select a band, press RPT/P.SCAN button

on the RC to scan all preset stations in the

memories of the current band, each preset

scan for 5 seconds. To stop preset scan, press

the button again.

RDS function

RDS (Radio Data System) service availability

varies with areas. Please understand if RDS

service is not available in you area, the

following service is not available, either.

AF (Alternative Frequencies)

function

Press and hold MEM button on the front

Downloaded from Caradio-Manual.com Manuals

14

Operation

panel to turn on AF function. If the AF function

is on, the display will show “AF”.

When the radio signal strength is poor,

enabling the AF function will allow the unit to

automatically search another station with the

same PI (Program Identification) as the current

station but with stronger signal strength, so that

you do not have to retune the stations when

driving between different transmitter coverage

areas. When AF symbol is on, it means RDS

information is received; when AF symbol is

flashing, it means RDS information is not yet

received. If RDS service is not available in your

area, turn off the AF mode.

TA (Travel Announcement) / TP

(Travel Program Identification)

Enable or disable TA mode by pressing and

holding OK button on the front panel. Default

setting is OFF.

When TA function is activated, it will search

the station with TA information automatically.

If there is no TA information, it will search the

station with TP information automatically, if

there is no TP information either, it will return to

the previous station after searching.

When receiving the station with TP

information but without TA information,

TP icon is on and TA icon keeps blinking;

when receiving the station with TP and TA

information, both TP and TA icons are on.

When playing in other mode and TA

information is received, it will change to the

radio mode automatically. After playing over, it

will return to the previous mode.

PTY (Program Type) (for FM radio)

This radio will allow you to select the type of

program required, and will search for a station

broadcasting that type of program.

Press PROG/PTY button on the RC to

show the music type. Then press 1 - 6 number

buttons to choose different music programs

available.

Press PROG/PTY button on the RC twice to

show the speech type program. Then press 1

- 6 number buttons to choose different speech

programs. Each number button will show 3

different speech programs for you to choose

(see table below).

Button Music group Speech group

1 Pop, Rock News, Affairs,

Info

2 Easy, Light Sport, Educate,

Drama

3 Classics,

Other

Culture, Science,

Varied

4 Jazz, Country Weather,

Finance, Children

5 Nation, Oldies Social, Religion,

Phone IN

6 Folk Travel, Leisure,

Document

When PTY is selected, the radio starts to

search corresponding PTY information, and

stops if the corresponding PTY information

is detected. If no buttons are pressed within

several seconds, previously selected PTY is

searched. During 1 loop, if desired PTY is not

found, the unit will return to previous mode.

Press PROG/PTY button on the RC for the 3rd

time to switch the PTY function off.

REG (Regional) function

Press repeatedly MENU button on the panel

or RC to select RDS. Press OK button on the

panel or ENTER button on the RC to enter RDS

setting mode. Press MENU button repeatedly to

choose REG ON (REG OFF); rotate VOLUME

knob or press VOL+/VOL- buttons on the RC to

toggle between REG ON (the receiver accepts

regional variants of the tuned station with REG

icon turned on), and REG OFF (the receiver

ignores regional variants).

Mono/Stereo control (in FM radio

mode)

Press repeatedly MENU button on the panel

or RC to select EXPERT. Press OK button on

Downloaded from Caradio-Manual.com Manuals

15

Operation

the panel or ENTER button on the RC to enter

EXPERT setting mode. Press MENU button

repeatedly to choose STEREO (MONO); rotate

VOLUME knob or press VOL+/VOL- buttons on

the RC to toggle between STEREO and MONO.

Improvement of reception of distant stations

can be done by selecting mono mode, which

may cut down some reception noise.

Or press ST/MO button on the RC to enable

or disable stereo reception.

Local radio station search

Press repeatedly MENU button on the panel

or RC to select EXPERT. Press OK button

on the panel or ENTER button on the RC to

enter EXPERT setting mode. Press MENU

button repeatedly to choose LOCAL (DX);

rotate VOLUME knob or press VOL+/VOL-

buttons on the RC to toggle between LOCAL

and DX. When the LOCAL function is on, the

local stations (stations with weak radio signal)

can be played. When DX is on, both local and

distant stations (stations with strong radio

signal) can be played.

Other parameter setting

Press repeatedly MENU button on the

panel or RC to select RDS. Press OK button

on the panel or ENTER button on the RC to

enter RDS setting mode. Press MENU button

repeatedly to choose TA SEEK => PI MUTE

=> RETUNE => MASK DPI => TA VOL =>

EON TA; rotate VOLUME knob or press VOL+/

VOL- buttons on the RC to adjust the selected

option.

Press OK button on the panel or ENTER

button on the RC to confirm the adjustment.

TA SEEK/TA ALARM

In TA SEEK mode, the unit will seek for

traffic announcement program when TA is

pressed; in TA ALARM mode, no TA/TP is

displayed and the alarm is set off.

PI SOUND/MUTE

PI sound refers to the reception noise

when the AF function tries to scan alternative

frequency.

RETUNE S/L - SHORT/LONG

RETUNE refers to the time period the

unit allows for radio scan when reception is

interrupted. “S” represents a time period of 30

seconds and “L” represents a time period of 90

seconds.

MASK DPI/MASK ALL

During MASK DPI mode, the unit will mask

only the AF which has different PI, this is the

default mode; during MASK ALL mode, the unit

will mask the AF which has different PI and no

RDS signal with high field strength.

TA VOLUME

Adjust the volume level of TA

announcements.

EON TA LOCAL/DX

If you want to receive information from local

stations only, select EON TA LOC mode.

Otherwise, select EON TA DX mode.

Disc/USB/SD/MMC operations

USB/SD/MMC notes

USB functions (flash memory type) MP3

music play.

SD/MMC card support, 2in1 (SD/MMC)

support.

USB flash memory.

FAT 12/ FAT 16/ FAT 32 is possible

• FAT 12/16 (dir: 200 support, file: 500

support),

• FAT 32 (dir: 200 support, file: 500 support).

• Filename: 32 byte/ Dir name: 32 byte.

• Tag (id3tag ver2.0).

• Title/ Artist/ Album: 32 byte support.

Multi card reader not support. USB 2.0

support.

USB format supports 2.0. Capacity: up

to 4 Gb.

For correct and satisfactory operation,

licensed SD/MMC memory cards of famous

brands should be used with this unit. Avoid using

memory cards of unknown brands. Capacity: up

to 4 Gb.

Downloaded from Caradio-Manual.com Manuals

16

Operation

Insert/Eject disc

Open the front panel and insert a disc into

the disc slot with label side up. The disc will be

automatically loaded into the unit. The first file

in the root folder will be played.

Open the front panel and press EJECT

button to eject the disc from the slot. If the disc

is not removed from the slot within several

seconds, it will be automatically loaded into

the slot again. When the disc is ejected and

removed, the unit will automatically switch to

another mode.

Inserting an SD/MMC card/USB

device

Open the front panel and insert an SD/

MMC memory card into the card slot. Open the

USB slot cover on the front panel and insert a

USB into the USB slot. Then the playing mode

will be changed into MMC/SD or USB mode

automatically. The first card/USB device track

playback will start.

When SD/MMC card and USB device

are both inserted, the playing mode will be

changed into the mode of the device inserted

later.

Play/pause

The unit will automatically play from the first

sound track recorded on a disc/SD/MMC/USB

device. To ensure good system performance,

wait until the unit finishes reading the disc/

device information before proceeding. Press

button on the RC or MEM button on the

panel to pause playback, press it again to

resume playback.

MP3/WMA/DivX/JPEG file playback

When you insert a storage containing MP3/

WMA/DivX/JPEG file, the external screen will

show following interface:

1 2 3 4 5

6 7 8

1. Storage folder list

2. Scroll bar

3. Current playback info

4. Current folder content (current file is

highlighted)

5. Scroll bar

6. Audio track selection

7. Image file selection

8. Video file selection

Use cursor buttons to navigate in the

interface and press ENTER button to confirm

your selection.

Stop playback

During playback of a disc/USB/SD/MMC

card, press PBC/ button on the RC or press

and hold MEM button on the panel to stop the

playback. Press

button on the RC to start

playback again. Playback will resume from

the point it was stopped at. If you press PBC/

button on the RC or press and hold MEM

button on the panel twice, playback will stop

completely and can be resumed only from the

beginning of the disc.

Selecting Tracks

During playback press button to play

the beginning of current track, press it again

to play the previous track. Press button to

play the next track. Press umber buttons (0-9)

Downloaded from Caradio-Manual.com Manuals

17

Operation

on the RC to select the desired track/chapter.

Fast forward/rewind

Press and hold or buttons for fast

backward or forward playing.

When fast backward/forward playback

reaches the previous or next track, the unit will

resume normal playback.

A-B segment repeat

Press ZOOM/A-B button to set point A,

press one more time to set point B and start

A-B repeating. Press this button one more time

to cancel the repeating function.

Repeat playback

Press RPT/P.SCAN button to start repeat

playing. Press one more time to cancel. The

repeating sequence:

• For DVD: Repeat OFF => Repeat TITLE

=> Repeat Chapter.

• For CD/VCD/MP3: REP 1 => REP DIR =>

REP ALL => REP OFF.

Intro playback

Press INT button to activate introduction

function. Several initial seconds of each track

will be played. Press the button again to cancel

intro playback.

Random playback

Press RDM/BAND button to activate random

playing mode. Press one more time to return to

normal playing.

Programming the playback

• Press PROG/PTY button to open program

menu.

• Use cursor buttons to select the program

position and use number buttons to input the

desired track/title/chapter (depending on the

disc type).

• Press

button on the RC or press

MEM button on the panel to start program play,

or move the cursor to select PLAY and press

ENTER button on the RC or OK button on the

panel to play.

• Move the cursor to CLEAR, press ENTER

button on the RC or OK button on the panel to

delete the programmed list.

OSD (On Screen Display) function

Press OSD button on the RC repeatedly to

show current playback information, such as

number of track/chapter/title, current track/

chapter/title time elapsed/remaining, total track/

chapter/title time remaining (depending on the

disc type).

Zooming in/out

During playback of video or images on disc/

USB/SD/MMC card, press and hold repeatedly

ZOOM/A-B button on the RC, the picture will

be zoomed in the sequence: X2 => X3 => X4

=> X1/2 => X1/3 => X1/4 => Normal.

GOTO

Press and hold GOTO/AUDIO button to

set the playback parameters for the current

chapter/track/time directly (track/title/chapter

number or time). Press OK button on the panel

or ENTER button on the RC to start playback

from the set number or time.

Changing angle (for DVD only)

Press ANGLE button on the RC to playback

images at different camera angles. If a disc

doesn’t support multi-angle playback, this

function will not work.

Selecting audio language (for DVD

only)

During DVD disc playback, press GOTO/

AUDIO button on the RC repeatedly to select

the audio language to listen. This function will

not work if a disc does not support multi-

language audio.

Selecting subtitle language (for DVD

only)

If your DVD disc supports multi-language

subtitle, press SUB-T button on the RC

Downloaded from Caradio-Manual.com Manuals

18

Operation

repeatedly to switch among disc-supported

languages.

Selecting sound channel (for VCD

only)

During VCD disc playback press AUDIO

button on the RC to select the channel: MONO

L => MONO R =>MIX MONO => STEREO.

PBC (Playback Control) function (for

VCD only)

This function is only available for the VCD

with PBC function.

1. Press and hold PBC/ button on the

remote control to set PBC on/off, when PBC

is off, the screen will show PBC menu if you

switch PBC on.

2. If the menu consists of a list of titles, you

can select a desired one using number buttons

on the remote control.

Menu navigation (for DVD only)

Title playing:

Press TITLE button on the RC to activate the

title playback function.

Menu playing:

• Press and hold MENU button on the RC

to activate the disc menu list on the screen.

• Choose the desired item.

• On the RC, press ENTER button or

button to confirm the selected item and start

playing. On the panel, press OK button or

MEM button to confirm the selected item and

start playing.

Title and menu are only available if the

disc has these functions.

ID3 Tag function

If a MP3 file has ID3 Tag information in the

supported ID3 format, such information will be

displayed on the LCD while playback.

Notes on MP3 and WMA

• MP3 is short for MPEG Audio Layer 3

and refers to an audio compression technology

standard.

• This product allows playback of MP3 files

on CD-ROM, CD-R or CD-RW discs.

• The unit can read MP3 files written in the

format compliant with ISO 9660. However it

does not support the MP3 data written by the

method of packet write.

• The unit can not read an MP3 file that has

a file extension other than “.mp3”.

• If you play a non- MP3 file that has the

“.mp3” extension, you may hear some noise.

• In this manual, we refer to what are called

“MP3 file” and “folder” in PC terminology as

“track” and “album”, respectively.

• Maximum number of directory level is 8,

including the root directory. Maximum number

of files and folders per disc is 256.

• The unit may not play tracks in the order

of Track numbers.

• The unit plays only the audio tracks if a

disc contains both audio tracks and MP3 files.

• When playing a disc of 8 kbps or “VBR”,

the elapsed playing time in the display window

will not be correct and also the intro play may

not function properly. “VBR”: Variable Bit Rate.

• The unit supports the playback of WMA

files. The playback of ID3 tags for WMA format

is not guaranteed, it depends on versions and

availability of Cyrillic alphabet.

• WMA (Windows Media Audio) – music

data compression format, created by Microsoft

Corporation. This format uses coding algorithm

for compression of initial audio-record, greatly

decreasing the file size, but, saving the good

sound quality even when the bit rate is low (for

example, 64 Kbit/s).

• Remember that the unit may not play the

tracks in order they are written on disc.

Notes on creating your own CD-Rs

or CD-RWs containing MP3 files

• To enjoy high quality sound, we

recommend converting to MP3 files with a

sampling frequency of 44.1 kHz and a fixed bit

rate o f 128 kbps.

• Do not store more than 256 MP3 files per

disc.

• For ISO 9660 - compliant format, the

maximum allowable depth of nested folders is

Downloaded from Caradio-Manual.com Manuals

19

Operation

8, including the root directory (folder).

• When CD-R disc is used, playback is

possible only for discs, which have been

finalized.

• Make sure that when MP3 CD-R or CD-

RW is burned that it is formatted as a data disc

and not as an audio disc.

• You should not write non-MP3 files or

unneeded folders along with MP3 files on the

disc otherwise it takes a long time until the unit

starts to play MP3 files.

• With some CD-R or CD-RW media, data

may not be properly written depending on their

manufacturing quality. In this case, data may

not be reproduced correctly. High quality CD-R

or CD-RW disc is recommended.

• Up to 16 characters are displayed for the

name of an Album or a Track. ID3TAG version

1.x is required.

• Note that the unit may not play tracks in

the order that you wrote them to the disc.

System setup

Press SETUP button on the RC to display

setup screen, use

/ cursor buttons and

ENTER button to select the desired setup

page: System, Language, Audio, Video, Digital.

In the selected page select an option using

/ cursor buttons, then press cursor button

to go to setting list. Use

/ cursor buttons to

select the needed setting. Press ENTER button

to confirm.

System setup

SYSTEM SETUP

TV SYSTEM

SCREEN SAVER

VIDEO

TV TYPE

PASSWORD

RATING

DEFAULT

TV system

Select the TV system in the setting menu

(NTSC, PAL, PAL-60, AUTO).

Screen saver

The screen saver appears if disc stops for

more than 3 minutes.

Original setting: On.

Video

Interlace-YUV

TV type

Select TV type to watch wide screen movies.

4:3 PS: For 4:3 TV, left and right edges will

be cut.

4:3 LB: For 4:3 TV, black bars will appear on

top and bottom.

16:9: For 16:9 wide screen TV.

Password

Original password is 0000.

Rating

The rating of the disc is from 1 to 8:

1(KID SAFE) with the most limits when

playing.

8 (ADULT) with the least limits when playing.

Original setting: 8.

The rating can be selected only under

the password unlocked status, and the limits

can be worked only under the password locked

status.

Default

If this item is selected, the unit will return to

original setting.

Language setup

LANGUAGE SETUP

OSD LANGUAGE

AUDIO LANG

SUBTITLE LANG

MENU LANG

DIVX [R] VOD

MP4 LANG

OSD language

Select the language to be used for the on-

Downloaded from Caradio-Manual.com Manuals

20 21

Operation General information

screen display.

Audio language

Select the language to be used for the audio.

You can select a preferred audio from those

included on the DVD video disk.

Subtitle language

Select the language to be used for the

Subtitles. You can select a preferred subtitle

from those included in the DVD Video disk.

Menu language

Select the language to be used for the Menu.

You can select a preferred audio from those

included on the DVD.

DivX [R] VOD

This item is to show you DivX registratoin

code.

MP4 language

Cyrillic MP4 lettering style.

Audio setup

AUDIO SETUP

KEY

Key

Select key up/down according to your

preference.

Video setup

VIDEO SETUP

BRIGHTNESS

CONTRAST

HUE

SATURATION

SHARPNESS

Set a parameter with / cursor buttons:

Brightness, Contrast, Hue, Saturation,

Sharpness.

Digital setup

DIGITAL SETUP

DYNAMIC RANGE

DUAL MONO

Dynamic range

When you select the compressed mode as

“line out”, select it to adjust the compression

proportion and get the different compressed

effect. When select FULL, the audio signal is

minimum; when select OFF, the audio signal is

maximum.

Dual mono

Select the audio channel from STEREO,

MONO L, MONO R and MIX MONO.

Downloaded from Caradio-Manual.com Manuals

Страница загружается ...

Hyundai Excellence H-CMD7080 Руководство пользователя

Hyundai Excellence H-CMD7080 Руководство пользователя

Похожие модели бренда

Модели других брендов