TSX-100

Yamaha TSX-100, tsx 100 Инструкция по применению

  • Привет! Я прочитал руководство пользователя для аудиосистемы Yamaha TSX-100. Готов ответить на ваши вопросы о ее функциях, настройках и устранении неполадок. В руководстве подробно описаны возможности воспроизведения различных форматов аудио, настройки радио, использование таймера и будильника, а также устранение неисправностей.
  • Как настроить будильник?
    Как воспроизвести MP3-файлы с USB-накопителя?
    Что делать, если звук пропал?
    Как настроить часы?
YAMAHA ELECTRONICS CORPORATION, USA
6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD.
135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H.
SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A.
RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD.
YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B.
J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY. LTD.
LEVEL 1, 99 QUEENSBRIDGE STREET, SOUTHBANK, VIC 3006, AUSTRALIA
©
2007 All rights reserved.
TSX-100
Printed in China CQX1A1286X
TSX-100
DESKTOP AUDIO SYSTEM
SYSTEME AUDIO DESKTOP
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
G
TSX-100_G-cv_rev2.fm Page 1 Wednesday, December 19, 2007 6:57 PM
i
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
AVERTISSEMENT
L’utilisation de commandes et l’emploi de réglages ou de
méthodes autres que ceux décrits ci-dessous, peuvent
entraîner une exposition à un rayonnement dangereux.
VORSICHT
Die Verwendung von Bedienelementen oder die Einstellung
bzw. die Ausführung von anderen als in dieser Anleitung
beschriebenen Vorgängen kann zu Gefährdung durch
gefährliche Strahlung führen.
OBSERVERA
Användning av reglage eller justeringar eller utförande av
åtgärder på annat sätt än så som beskrivs häri kan resultera i
farlig strålning.
ATTENZIONE
L’uso di controlli, regolazioni, operazioni o procedure non
specificati in questo manuale possono risultare in esposizione
a radiazioni pericolose.
PRECAUCIÓN
El uso de los controles, los ajustes o los procedimientos que
no se especifican enste manual pueden causar una exposición
peligrosa a la radiación.
LET OP
Gebruik van bedieningsorganen, instellingen of procedures
anders dan beschreven in dit document kan leiden tot
blootstelling aan gevaarlijke stralen.
ПРЕДОСТЕРЕЖЕНИЕ
Использование органов управления или произведение
настроек или выполнение процедур, не указанных в
данной инструкции, может отразиться на выделении
опасной радиации.
CAUTION INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO
BEAM.
VORSICHT! UNSICHTBARE LASERSTRAHLUNG TRITT
AUS, WENN DECKEL GEÖFFNET UND WENN
SICHERHEITSVERRIEGELUNG ÜBERBRÜCKT IST.
NICHT DEM STRAHL AUSSETSEN!
VARNING OSYNLIG LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD OCH SPÄRR ÄR URKOPPLAD. STRÅLEN ÄR
FARLIG.
ADVARSEL USYNLIG LASERSTRÅLING VED ÅBNING,
NÅR SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION.
UNDGÅ UDSÆTTELSE FOR STRÅLING.
VAROITUS! SUOJAKOTEL OA EI SAA AVATA. LAITE
SISÄLTÄÄ LASERDIODIN, JOKA LÄHETTÄÄ
(NÄKYMÄTÖNTÄ) SILMILLE VAARALLISTA LASER
SÄTEILYÄ.
ADVARSEL USYNLIG LASERBESTRÅLING NÅR DENNE
DELEN ER ÅPEN OG SIKKERHETSSPERREN ER
UTKOBLET. UNNGÅ UTSETTELSE FOR STRÅLING.
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
PRODUIT LASER DE CLASSE 1
ii
VAROITUS
Muiden kuin tässä esitettyjen toimintojen säädön tai asetusten
muutto saattaa altistaa vaaralliselle säteilylle tai muille
vaarallisille toiminnoille.
DK
Advarsel: Usynlig laserstråling ved åbning når
sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for
stråling.
Bemærk: Netafbryderen POWER OFF er sekundært indkoblet og
ofbryder ikke strømmen fra nettet. Den indbyggede netdel er
derfor tilsluttet til lysnettet så længe netstikket sidder i
stikkontakten.
N
Observer: Nettbryteren
POWER OFF
er sekundert innkoplet. Den
innebygdenetdelen er derfor ikke frakoplet nettet så lenge apparatet er
tilsluttet nettkontakten.
S
Klass 1 laseraparat
Varning! Om apparaten används på annat sättþän i denna
bruksanvisning specificerats, kan användaren utsättas för osynlig
laserstrålning, som överskrider gränsen för laserklass 1.
Observera! Strömbrytaren POWER OFF är sekundärt kopplad
och inte bryter inte strömmen från nätet. Den inbyggda nätdelen
är därför ansluten till elnätet så länge stickproppen sitter i
vägguttaget.
SF
Luokan 1 laserlaite
Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa
mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1
ylittävälle näkymättömälle lasersäteilylle.
Oikeus muutoksiin varataan. Laite ei saa olla alttiina tippu-ja
roiskevedelle.
Huom. Toiminnanvalitsin
POWER OFF
on kytketty toisiopuolelle,
eikä se kytke laitetta irti sähköverkosta. Sisäänrakennettu verkko-osa
on kytkettynä sähköverkkoon aina silloin, kun pistoke on pistorasiassa.
For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the instructions
described below.
The plug severed from the mains lead must be destroyed, as a
plug with bared flexible cord is hazardous if engaged in a live
socket outlet.
Special Instructions for U.K. Model
VARO!
AVATTAESSA JA SUOJALUKITUS OHITETTAESSA
OLET ALTTIINA NÄKYMÄTTÖMÄLLE
LASERSÄTEILYLLE.
ÄLÄ KATSO SÄ TEESEEN.
VARNING!
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR
ÖPPNAD OCH SPÄRREN ÄR URKOPPLAD. BETRAKTA
EJ STRÅLEN.
Note
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to
the terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L
or coloured RED.
Make sure that neither core is connected to the earth
terminal of the three pin plug.
iii En
1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install this unit in a well ventilated, cool, dry, clean place
with at least 10 cm on the top, 10 cm on the left and right,
and 10 cm at the back of this unit
away from direct
sunlight, heat sources, vibration, dust, moisture, and/or
cold.
3 Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature changes
from cold to hot, and do not locate this unit in an
environment with high humidity (i.e. a room with a
humidifier) to prevent condensation inside this unit,
which may cause an electrical shock, fire, damage to this
unit, and/or personal injury.
5 Avoid installing this unit where foreign object may fall
onto this unit and/or this unit may be exposed to liquid
dripping or splashing. On the top of this unit, do not
place:
Other components, as they may cause damage and/or
discoloration on the surface of this unit.
Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
Containers with liquid in them, as they may fall and
liquid may cause electrical shock to the user and/or
damage to this unit.
6 Do not cover this unit with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation. If the
temperature inside this unit rises, it may cause fire,
damage to this unit, and/or personal injury.
7 Do not plug in this unit to a wall outlet until all
connections are complete.
8 Do not operate this unit upside-down. It may overheat,
possibly causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents; this might
damage the finish.
12 Only voltage specified on this unit must be used. Using
this unit with a higher voltage than specified is dangerous
and may cause fire, damage to this unit, and/or personal
injury. Yamaha will not be held responsible for any
damage resulting from use of this unit with a voltage
other than specified.
13 To prevent damage by lightning, keep the power cord and
outdoor antennas disconnected from a wall outlet or this
unit during a lightning storm.
14 Do not attempt to modify or fix this unit. Contact
qualified Yamaha service personnel when any service is
needed. The cabinet should never be opened for any
reasons.
15 When not planning to use this unit for long periods of
time (i.e. vacation), disconnect the AC power plug from
the wall outlet.
16 Be sure to read the “Troubleshooting” section on
common operating errors before concluding that this unit
is faulty.
17 Before moving this unit, press POWER OFF to set this
unit to the standby mode, and disconnect the AC power
plug from the wall outlet.
18 Condensation will form when the surrounding
temperature changes suddenly. Disconnect the power
cable from the outlet, then leave this unit alone.
19 When using this unit for a long time, this unit may
become warm. Turn the power off, then leave this unit
alone for cooling.
20 Install this unit near the AC outlet and where the AC
power plug can be reached easily.
21 The batteries shall not be exposed to excessive heat such
as sunshine, fire or the like.
22 Excessive sound pressure from earphones and
headphones can cause hearing loss.
LASER SAFETY
This unit employs a laser. Due to possible eye injury, only a qualified
service person should remove the cover or attempt to service this
device.
DANGER
This unit emits visible laser radiation when open. Avoid direct
eye exposure to beam. When this unit is plugged into the wall
outlet, do not place your eyes close to the opening of the disc tray
and other openings to look into inside.
Caution: Read this before operating your unit.
This unit is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this unit itself
is turned off by POWER OFF. This state is called the standby
mode. In this state, this unit is designed to consume a very
small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
The laser component in this product is capable of emitting
radiation exceeding the limit for Class 1.
This symbol mark is according to the EU directive
2002/96/EC.
This symbol mark means that electrical and
electronic equipment, at their end-of-life, should be
disposed of separately from your household waste.
Please act according to your local rules and do not
dispose of your old products with your normal
household waste.
1 En
English
PREPARATIONINTRODUCTION
OPERATION
ADDITIONAL
INFORMATION
Features ................................................................... 2
Controls and functions ........................................... 3
Front/top view............................................................ 3
Remote control........................................................... 4
Preparation before using this unit ........................ 6
Turning on the power................................................. 6
Adjusting the clock.................................................... 7
Basic operation........................................................ 8
Selecting the input source.......................................... 8
Adjusting the volume level........................................ 8
Adjusting sounds ....................................................... 9
Useful operations for the display............................. 10
Listening to CDs, MP3/WMA files,
and external sources ......................................... 11
Listening to CDs...................................................... 11
Listening to MP3/WMA files stored on your USB
device................................................................... 12
Switching the playback information display ........... 14
Repeat and random playback................................... 15
Playing back external sources.................................. 15
Listening to FM and AM radio stations ............. 16
Connecting antennas................................................ 16
Tuning radio stations ............................................... 16
Presetting radio stations automatically
(Auto preset)........................................................ 17
Presetting radio stations manually
(Manual preset).................................................... 17
Selecting preset radio stations (Preset tuning)......... 18
Receiving Radio Data System stations.................... 18
Using the timer functions..................................... 20
Troubleshooting.....................................................22
General..................................................................... 22
Disc playback .......................................................... 22
MP3/WMA file playback ........................................ 23
Radio reception........................................................ 23
Remote control ........................................................ 24
Notes on discs.........................................................25
Disc information ...................................................... 25
Handling a disc ........................................................ 25
Glossary..................................................................26
Specifications .........................................................26
Contents
INTRODUCTION
PREPARATION
OPERATION
ADDITIONAL INFORMATION
FEATURES
2 En
Stylish compact all-in-one design
Audio CDs, MP3 CDs, and WMA CDs playable
USB supported
Sophisticated FM/AM tuner
Simple but functional remote control
Timer and clock function
“Swing Radiator Bass
” is a trademark of YAMAHA
CORPORATION.
About this manual
In this manual, operations that can be performed with either this unit or its remote control are explained using the
remote control.
The symbol “ ” with page number(s) indicates the corresponding reference page(s).
y indicates a tip for your operation.
Notes contain important information about safety and operating instructions.
This manual is printed prior to production. Design and specifications are subject to change in part as a result of
improvements, etc.
In case of differences between the manual and the product, the product has priority.
Supplied accessories
This product includes the following accessories. Make sure you have all of the following parts.
The form of the supplied accessories varies depending on the models.
Features
Note
ALARM
INPUT
VOLUME
STANDBY/ON
ON/OFF
2134
6578
09
TIMER
TIME/INFO
PRESET
DISPLAY
TONE EQ
SLEEPDIMMER
TIME ADJ
TUNE
MODE-PTY SEEK-START FREQ/TEXT
RANDOM
REPEAT
/ /
ENTER
CDUSB
TUNER
MUTE
PORTABLE
Indoor FM antenna AM loop antenna
Power cable
Remote control
3 En
English
INTRODUCTION
Controls and functions
Front/top view
POWER OFF
SLEEP
ALARM
MUTE
PRESET
VOLVOL
Starts and pauses playback. ( P. 11)
Stops playback or ejects a disc when
playback is stopped. ( P. 11)
,
Skips to the beginning of the current or next
track.
Press and hold the key to search backward/
forward. ( P. 11)
POWER OFF
Sets this unit to the standby mode. ( P. 6)
SLEEP
Sets the sleep timer. ( P. 21)
6
7/0
4//¢
USB port ( P. 12)
Speaker
Disc slot ( P. 11)
Display
VOL u, d
Adjusts volume level. ( P. 8)
MUTE
Turns off the volume. ( P. 8)
PRESET u, d
Selects the preset stations. ( P. 17)
ALARM
Sets the alarm function. ( P. 20)
INPUT/SNOOZE
Turns on this unit and selects an input
source ( P. 6, 8), or enables the
snooze function when alarm is
activated. ( P. 20)
4 En
Controls and functions
Remote control
ALARM
INPUT
VOLUME
STANDBY/ON
ON/OFF
213
657
09
TIMER
TIME/INFO
PRESET
DISPLAY
TONE EQ
SLEEPDIMMER
TIME ADJ
TUNE
MODE-PTY SEEK-START FREQ/TEXT
RANDOM REPEAT
//
ENTER
CDUSB
TUNER
MUTE
PORTABLE
4
8
STANDBY/ON
DIMMER
TIME/INFO
RANDOM
INPUT
CDUSB
TUNER
PORTABLE
VOLUME
MUTE
Turns on this unit. ( P. 6)
Changes the brightness of the display.
( P. 10)
Displays the disc/USB information.
( P. 14)
Sets this unit to the random playback mode.
( P. 15)
Select the source you want to listen to.
Press PORTABLE to listen to the source played back on the
component which is connected to the PORTABLE jack on
the rear panel of this unit. ( P. 15)
Press USB to listen to the source stored in the connected
USB memory. ( P. 12)
Press TUNER to listen to FM/AM radio broadcast. Each
time you press TUNER, the source switches between FM
and AM. ( P. 16)
Press CD to listen to a disc inserted into the disc slot.
( P. 11)
Adjust volume. ( P. 8)
Infrared signal
transmitter
Cursor (S/T/W/X) and ENTER
Remove the insulation sheet
before using the remote control.
y
Remove the transparent sheet before using the remote
control.
5 En
Controls and functions
English
INTRODUCTION
ALARM
ON/OFF
TIMERSLEEP
TIME ADJ
1
65
3
7
09
4
8
2
TONE EQ
DISPLAY
REPEAT
MODE-PTY SEEK-START FREQ/TEXT
/ /
Set various timer and clock function.
ALARM ON/OFF: Activates or cancels the alarm function. ( P. 20)
TIME ADJ: Adjusts the clock of this unit. ( P. 7)
SLEEP: Sets the sleep timer. ( P. 21)
TIMER: Sets the countdown timer. ( P. 21)
Select the desired track or preset station directly.
( P. 11, 13, 17, 18)
Adjust the sound.
TONE: Adjusts the bass and treble balance. ( P. 9)
EQ: Selects the equalizer mode. ( P. 9)
Control playback.
, : Skips to the beginning of the current or next track.
Press and hold the key to search backward/forward. ( P. 11, 12)
: Starts and pauses playback. ( P. 11, 12)
: Stops playback or ejects a disc when playback is stopped. ( P. 11, 12)
6
7/0
Sets this unit to the repeat playback mode. ( P. 15)
Changes the displayed information. ( P. 10)
Using the remote control
30˚ 30˚
Within 6 m
(20 feet)
Use the remote control within 6 m (20 feet) of this unit and point
it toward the remote control sensor.
Do not put obstacles between the sensor of this unit and the remote control. Doing
so, you cannot operate this unit by the remote control.
Do not spill liquid on the remote control.
Do not drop the remote control.
Do not leave the remote control in the following places:
hot or humid places such as bathroom or near a heater
extremely cold places
dusty places
For replacement of the battery P. 24.
Notes
PREPARATION BEFORE USING THIS UNIT
6 En
Preparation before using this unit
Turning on the power
STANDBY/ON
Turn on this unit.
Press again to set this unit to the standby mode.
y
During the standby mode, the power consumption is reduced.
In the standby mode, you can select whether to display the date and time (in the ECO OFF
mode) or not to display them (in the ECO ON mode).
1 While in the standby mode, press and hold the MUTE on the top panel.
J The “ECO ON” or “ECO OFF” flashes.
2 While the indicator is flashing, press the MUTE to select “ECO ON” or “ECO OFF”.
3 Wait several seconds.
J The mode is set to ECO ON or ECO OFF.
The memory back-up circuit prevents the stored data from being lost even if this unit is in
the standby mode. However, the stored data will be lost if the power cable is disconnected
from the AC wall outlet or if the power supply is cut off for more than one week.
On the top panel
You can also perform the above operations on the top panel.
INPUT/SNOOZE
POWER OFF
SLEEP
Turn on this unit.
Set this unit to
the standby mode.
(Not displayed)
ECO ON mode
11:22
12 Oct Fri
ECO OFF mode
(Date and time displayed)
Display in
the
standby
mode
Connect the power cable to the AC inlet of this unit
and an AC wall outlet.
1 To AC inlet
2 To an AC wall outlet
STANDBY/ON
Preparation before using this unit
7 En
English
PREPARATION
Adjusting the clock
PRESET
TUNE ENTER
TIME ADJ
TIME ADJ
PRESET
TUNE ENTER
PRESET
TUNE ENTER
Year
2007
Adjust date and time.
W/X
Selects year/date/hour/minute.
S/T
Increases or decreases the date or time.
Date
12 Oct Fri
Time
1:23AM
Examples
Confirm.
Time appears in 12-hour notation (AM/PM) depending on the model. For example,
“4:00PM”.
Note
When the display is off, turn on the power
before making this setting.
Note
Basic operation
8 En
Using the headphones
y
Even when you connect your headphones, the alarm sound is
output through the speaker.
Basic operation
Selecting the input source
On the top panel
INPUT
CDUSB
TUNER
PORTABLE
To listen to music played on a
portable audio device
To listen to MP3/WMA files
stored on your USB device
To listen to radio stations
(FM/AM)
To listen to a CD
PORTABLE
USB
TUNER
CD
INPUT/SNOOZE
Press repeatedly.
Adjusting the volume level
On the top panel
VOLUME
MUTE
To increase or decrease
the volume level
y
If the power is turned off with the
volume set to a level of 41 or more, the
volume level is automatically set to 20
when the power is turned back on.
To turn off the sound
y
Press again to resume the volume level.
VOLUME
Volume 41 20
MUTE
ALARM
MUTE
PRESET
VOLVOL
Decreases the
volume level.
Turns off the sound.
Increases the
volume level.
TUNER
PHONES
PORTABLE
FM ANT
75
UNBAL.
To PHONES
Basic operation
9 En
English
OPERATION
Adjusting sounds
ENTER
TONE EQ
PRESET
TUNE ENTER
EQ
PRESET
TUNE ENTER
TONE
BASS 0
BASS +02
Press repeatedly.
ROCK
POP
JAZZ
CLASSIC
STRAIGHT
For rock music
For popular music
For jazz
For classical music
For various music
Select “BASS” (low frequency range)
or “TREBLE” (high frequency range).
Adjust the level (–10 to +10 dB).
Adjusting bass/treble balance
Adjusting the total sound balance
Press repeatedly.
Confirm.
Basic operation
10 En
Useful operations for the display
DISPLAY
DISPLAY
Time and playback status
Date
Alarm 2 setting ( P. 20)
Sleep timer setting ( P. 21)
Alarm 1 setting ( P. 20)
Countdown timer (only when activated) ( P. 21)
Press repeatedly.
Switching the display information
Input
DIMMER
AUTO CONTROL
100%
50%
30%
Dimming the display
Press repeatedly.
Bright
Mid dim
Dim
Adjusts the brightness automatically
according to the ambient brightness.
DISPLAY
DIMMER
Listening to CDs, MP3/WMA files, and external sources
11 En
English
OPERATION
To pause playback
y
To cancel pause, press again.
To skip tracks
To search backward/
forward
No sound is heard when you search
during pause.
To specify a track
y
Enter the track number you want to listen
to.
To stop playback
To eject a disc
Listening to CDs, MP3/WMA files, and external sources
Listening to CDs
/ /
CD
2134
6578
09
CD
1:23PM
T001 00:01
Elapsed
time
Current
track
Status
indicator
Insert your disc.
y
You can also play back MP3/WMA files recorded on a disc. For operation instruction,
refer to “Listening to MP3/WMA files stored on your USB device” ( P. 12).
1:23PM
T014 60:59
Total time of
the disc
Total
tracks
Status
indicator
y
You can switch the playback information display ( P. 14).
You can also play back MP3/WMA files recorded on a disc. Refer to “Listening to
MP3/WMA files stored on your USB device” ( P. 12).
When the playback is
stopped
Playback starts.
On the top panel
POWER OFF
SLEEP
Playback/Pause
Skip forward/
Search forward*
* Press and hold while in playback
or pause.
Stop/Eject*
Skip backward/
Search backward*
Note
FREQ/TEXT
/
6
Backward
Forward
Backward
Forward
Press and hold
2134
6578
0
9
/
While playback
is stopped
While in playback
or pause
Press
/
/
Press and
hold
Listening to CDs, MP3/WMA files, and external sources
12 En
To stop playback
To pause playback
y
To cancel pause, press again.
To skip tracks
To search backward/
forward
Pause will be canceled when you start
searching.
Listening to MP3/WMA files stored on your USB device
PRESET
TUNE
/
ENTER
USB
2134
6578
09
USB
Connect a USB device.
This unit supports USB mass storage class devices (e.g., flash memories or
portable audio players) using FAT16 or FAT32 format.
Some devices may not work properly even if they meet the requirements.
Do not connect devices other than USB mass storage class devices (such as USB
chargers or USB hubs), PCs, card readers, external HDD, etc.
Yamaha will not be held responsible for any damage to or data loss on the USB device
occurring while the device is connected to this unit.
Playability of and power supply to all kind of USB devices are not guaranteed.
Notes
1:23PM
Road to Ind
Song title/artist name/album name
Playback starts.
y
You can switch the playback information display ( P. 14).
The reading time may exceed 30 seconds depending on the number of files/folders.
Note
On the top panel
POWER OFF
SLEEP
Playback/Pause
Skip forward/
Search forward*
Stop
Skip backward/
Search backward*
* Press and hold
/
FREQ/TEXT
/
6
Note
Backward
Forward
Backward
Forward
Press and hold
Listening to CDs, MP3/WMA files, and external sources
13 En
English
OPERATION
To specify a track for playback
y
Enter the track number you want to listen to.
Depending on the conditions of recording such as software
recording setting, this unit may not be able to play a disc or
USB device in the order of recording.
For an MP3 or WMA disc/USB device, the number assigned to
each file corresponds to the file sequence in the disc/USB
device, not in the individual folders.
To select a folder/file for an MP3 or WMA
format file
This unit can display up to 255 files and 255 folders. However,
less than 255 files/folders may be displayed if some files/folders
are not playable on this unit.
If the USB device is partitioned, only the first partition is
displayed.
Some files may not work properly depending on the USB
device specification.
Copyright-protected files cannot be played back.
This unit can play back files of 4 GB in size or less.
Notes
2134
6578
0
9
PRESET
TUNE ENTER
PRESET
TUNE ENTER
PRESET
TUNE ENTER
PRESET
TUNE ENTER
Select a folder.
Only when MP3/WMA disc playback
Select a file.
Start playback.
About MP3 or WMA files
You can play back MP3 or WMA files recorded on your CD-
R, CD-RW, or USB device. This unit regards folders in a disc/
USB device as albums, and files as tracks as shown below.
Folder hierarchy is disregarded.
Notes
Root
Folder (Album)
File (Track)
Listening to CDs, MP3/WMA files, and external sources
14 En
Each time you press the key, the information display
changes.
Some special characters may not be shown properly.
Audio CDs
Elapsed time of the current track (Default)
Remaining time of the current track
Total time of the disc
Remaining time of the disc
Back to the default display
MP3/WMA files
Scrolling display* (Default)
Elapsed time of the current file
Remaining time of the current file
File name
Song title
Artist name
Album name
Year
Comment
Back to the default display
*
Scrolling display shows the song title, artist name, and album
name of the selected item in sequence.
Switching the playback information display
Note
TIME/INFO
DIMMER
TIME/INFO
Press repeatedly
1:23PM
T014 02:21
T014-03:41
TTL 54:41
TTL -12:28
1:23PM
to order-Fr
T014 02:21
T014-03:41
Road-to-ind
Road to Ind
Frankie Zip
Made to ord
2007
Live at KCE
Listening to CDs, MP3/WMA files, and external sources
15 En
English
OPERATION
Repeat and random play modes are canceled when the playback
is stopped or the disc/USB device is removed.
Turn down the volume of this unit and your portable audio device
before connection.
y
For operations of the portable audio device, refer to the
instruction manual of the device.
Repeat and random playback
Note
RANDOM REPEAT
Random playback
Repeat playback
RANDOM
Rd
Press repeatedly
Normal playback
(Random playback)
REPEAT
Press repeatedly
R1
Rf
Ra
(Full repeat)
Normal playback
(Single repeat)
(Folder repeat, MP3/WMA disc/USB only)
Playing back external sources
Note
TUNER
PHONES
PORTABLE
FM ANT
GND
AM ANT
75
UNBAL.
PORTABLE
Portable audio
device
PORTABLE
PORTABLE
3.5 mm mini plug
Start playback on the
connected portable
audio device.
Connect your portable audio device.
Listening to FM and AM radio stations
16 En
y
While listening to the AM radio station, rotate the antenna head
to find the best angle for reception.
You can also tune radio stations manually by pressing TUNE
W/X repeatedly.
To increase the quality of the FM sound under the weak radio
wave, press and hold RANDOM on the remote control to
change the FM radio wave reception mode of this unit to the
monaural mode.
Listening to FM and AM radio stations
Connecting antennas
TUNER
FM ANT
GND
AM ANT
75
UNBAL.
1
2
3
Indoor FM
antenna
(supplied)
AM loop antenna (supplied)
Ground
(GND terminal)
The wire of the AM loop antenna is shield type. Connect the
white wire to AM ANT terminal and connect the black wire to
GND terminal.
Note
About grounding
For the maximum safety and minimum interference, connect
the antenna GND terminal to a good earth ground. A good
earth ground is a metal stake driven into the moist earth.
12 3
The cable of AM loop
antenna
Tuning radio stations
TUNE
RANDOM
TUNER
TUNER
PRESET
TUNE ENTER
Press and hold
Select FM or AM.
FM
87.50MHz
FM
89.70MHz
/