Tripp Lite B127A-1A1-BHPH Инструкция по применению

1

HDMI over Cat6 Extender Kits

and Repeater, 4K/60 Hz

Extender Kit Models: B127A-1A1-BHBH,

B127A-1A1-BHPH, B127A-111-BHTH, B127A-110-BH

Repeater Model: B127A-010-H

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

Owner's Manual

WARRANTY REGISTRATION

Register your product today and be automatically entered to

win an ISOBAR

®

surge protector in our monthly drawing!

tripplite.com/warranty

Español 27 • Français 53 • Русский 79 • Deutsch 105

20-10-008-933D27-Book.indb 120-10-008-933D27-Book.indb 1 4/21/2021 4:00:29 PM4/21/2021 4:00:29 PM

2

B127A-1A1-BHBH

B127A-1A1-BHPH

B127A-111-BHTH

B127A-110-BH

B127A-010-H

Local and Remote Units (LR),

Remote Unit (R), Repeater Unit (RT)

LR LR LR R RT

External Power Supplies (0 or 1) 1 1 1 1 0

Mounting Hardware Y Y Y Y N

Package Contents

Product Features

All

• Support video resolutions up to 4K x 2K (3840 x 2160) @

60 Hz, as speciﬁed in HDMI 2.0, with 4:4:4 Chroma

Subsampling

• Support up to 7.1-channel surround sound audio

• HDCP 2.2- and HDR-compatible

• USB 1.1 standard

• Plug and play—no software or drivers required

Note: USB 1.1 standard and bi-directional IR applies only to the extender

kits, not the repeater.

20-10-008-933D27-Book.indb 220-10-008-933D27-Book.indb 2 4/21/2021 4:00:29 PM4/21/2021 4:00:29 PM

3

Product Features

B127A-1A1-BHBH

• HDMI over Cat6 Power over Cable (PoC) Extender Kit

• Extends a 4K x 2K (3840 x 2160) @ 60 Hz signal, as speciﬁed

in HDMI 2.0, up to 230 ft. (70 m) from the source

• Built-in local HDMI port supports 4K @ 60 Hz signal

• Remote receiver unit features built-in equalization (EQ) control

and auto EDID image adjustment

• Supports up to 7.1-channel surround sound audio

• Receiver features built-in Toslink port for audio extraction

function

• HDCP 2.2-compatible

• Plug and play—no software or drivers required

• Support bi-directional IR and USB 1.1 function by dip switch

selection

• Includes mounting hardware that enables both the local

transmitter and remote receiver units to be wall-mounted,

rack-mounted or pole-mounted

• Power over Cable (PoC) function allows external power supply

to be plugged in at either transmitter or receiver side and

provide power to both units

20-10-008-933D27-Book.indb 320-10-008-933D27-Book.indb 3 4/21/2021 4:00:29 PM4/21/2021 4:00:29 PM

4

Product Features

B127A-1A1-BHPH

• HDMI over Cat6 Power over Cable (PoC) Extender Kit with

Pigtail Receiver

• Extends a 4K x 2K (3840 x 2160) @ 60 Hz signal, as speciﬁed

in HDMI 2.0, up to 230 ft. (70 m) from the source

• Built-in local HDMI port supports 4K @ 60 Hz signal

• Remote receiver unit features built-in equalization (EQ) control

and auto EDID image adjustment with 1 ft. HDMI male cable

• Supports up to 7.1-channel surround sound audio

• HDCP 2.2-compatible

• Plug and play—no software or drivers required

• Includes mounting hardware that enables both the local

transmitter and remote receiver units to be wall-mounted,

rack-mounted or pole-mounted

• Power over Cable (PoC) function allows external power supply

to be plugged into transmitter and provide power to both units

20-10-008-933D27-Book.indb 420-10-008-933D27-Book.indb 4 4/21/2021 4:00:29 PM4/21/2021 4:00:29 PM

5

Product Features

B127A-111-BHTH

• HDMI over Cat6 Power over Cable (PoC) daisy-chainable

Extender Kit

• Remote transceiver unit features built-in equalization (EQ)

control, auto EDID image adjustment and RJ45 expanding port

to be able to connect to next B127A-110-BH

• Transceiver features built-in Toslink port for audio extraction

function

• Extends and expands a 4K x 2K (3840 x 2160) @ 60 Hz

signal, as speciﬁed in HDMI 2.0, in an over Cat6 installation,

allowing multiple monitors to be located at different points in a

chain by adding up to four B127A-110-BH units

• Extends a 4K (3840 x 2160) @ 60 Hz signal up to an

additional 230 ft. or a 1080p @ 60 Hz signal up to an

additional 230 ft. from each remote/repeater unit to the next

unit in the chain (in a full four-level daisy chain installation), a

4K (3840 x 216) @ 60 Hz signal up to 920 ft. or a 1080p @

60 Hz signal up to 500 ft. from the source to the last remote

unit in the chain

• Supports up to 7.1-channel surround sound audio

• Transceiver features built-in Toslink port for audio extraction

function

20-10-008-933D27-Book.indb 520-10-008-933D27-Book.indb 5 4/21/2021 4:00:29 PM4/21/2021 4:00:29 PM

6

Product Features

• HDCP 2.2-compatible

• Plug and play—no software or drivers required

• Includes mounting hardware that allows unit to be wall-

mounted, rack-mounted or pole-mounted

• Power over Cable (PoC) function allows external power supply

to be plugged into either transmitter or receiver side and

provide power to connected units

B127A-110-BH

• HDMI over Cat6 Power over Cable (PoC) transceiver unit

• Works with the B127A-111-BHTH to extend a 4K x 2K

(3840 x 2160) @ 60 Hz signal, as speciﬁed in HDMI 2.0,

up to 230 ft. (70 m)

• This transceiver unit features built-in equalization (EQ) control

and auto EDID image adjustment and one RJ-45 expanding

port to be able to connect to next B127A-110-BH

• Transceiver features built-in Toslink port for audio extraction

function

20-10-008-933D27-Book.indb 620-10-008-933D27-Book.indb 6 4/21/2021 4:00:29 PM4/21/2021 4:00:29 PM

7

Product Features

B127A-010-H

• Repeater unit extends the transmission of a 4K x 2K

(3840 x 2160) @ 60 Hz signal, as speciﬁed in HDMI 2.0,

up to a total of 400 ft. (120 m)

• Power over Cable (PoC) technology means no external

power is required to power the unit

• HCDP 2.2- and HDR-compliant

• Supports up to 7.1-channel surround sound audio

Optional Accessories:

• N202-Series Cat6 24 AWG Solid Wire Patch Cables

• P569-XXX-CERT or P568-XXX-2A Series High-Speed

HDMI 2.0 Cables

20-10-008-933D27-Book.indb 720-10-008-933D27-Book.indb 7 4/21/2021 4:00:29 PM4/21/2021 4:00:29 PM

8

Disclaimer

Before installation, please check the following settings of your

source(s) and TV/monitor(s):

1. Set display to 60 Hz. Double-check factory settings, as

default can be set to a lower frequency (Hz) than advertised.

2. Ensure the input setting of your monitor is set at HDMI 2.0.

Some displays may have default setting at HDMI 1.4.

3. Verify your monitor has the HDR feature enabled. Some

displays may have this feature disabled as a factory setting.

4. Check if the Ultra HD (UHD) Deep Color setting is enabled on

your TV/monitor. Conﬁrm with your TV/monitor manufacturer

which HDMI ports support UHD Deep Color.

5. Check USB/IR DIP switch, as the default setting is set to IR.

Note: To connect a local monitor to your installation, the UHD Deep

Color setting may need to be disabled on your local TV/monitor

(depending make/mode) to achieve 4K @ 60 Hz resolution.

20-10-008-933D27-Book.indb 820-10-008-933D27-Book.indb 8 4/21/2021 4:00:29 PM4/21/2021 4:00:29 PM

9

Mounting Instructions (select models only)

The B127A-1A1-BHBH, B127A-1A1-BHPH, B127A-111-BHTH

and B127A-110-BH include mounting hardware that allows for a

variety of mounting methods.

The following images illustrate how the included mounting

brackets can be attached for different installations.

Note: The model shown in the below images is for illustrative purposes

only. Your product may vary by model number, size or port orientation.

The mounting options for all over IP units are the same.

Wall-Mount

19” Rack-Mount Pole-Mount

20-10-008-933D27-Book.indb 920-10-008-933D27-Book.indb 9 4/21/2021 4:00:30 PM4/21/2021 4:00:30 PM

10

Standard Extender Kit Installation

Notes:

1) Test to ensure the entire installation works properly before pulling

cables through ceilings/walls.

2) To achieve maximum distance and performance, use 24 AWG solid

wire Cat6 cable. Using stranded wire Cat6 cable or cable with a

gauge (AWG) size higher than 24 AWG will result in shorter extension

distance. Higher gauge cabling, such as 26 AWG, has a more limited

transmission capability than lower gauge cabling. All Tripp Lite

N202-Series Cat6 cables are made with 24 AWG solid wire cabling.

3) The installation diagram shows a B127A-1A1-BHBH unit.

4) External power is not required for remote receiver units due to Power

over Cable (PoC) technology incorporated in the transmitter units.

B127A-1A1-BHBH

extender kit

IR Control

Pad

IR Sensor

HDR Player

LOCAL / TRANSMITTER REMOTE / RECEIVER

Monitor

TV

USB Keyboard

USB Mouse

Up to 230 ft. Cat6 solid cable at 4K/60 Hz

Up to 15 ft. HDMI 2.0 cable at 4K/60 Hz

Micro-USB cable

Toslink cable

IR Control

Pad

IR

Sensor

20-10-008-933D27-Book.indb 1020-10-008-933D27-Book.indb 10 4/21/2021 4:00:30 PM4/21/2021 4:00:30 PM

11

Standard Extender Kit Installation

1. Make sure all equipment in the installation—such as TVs,

Blu-ray™ players and the transmitter—is powered OFF.

2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT

or P568-XXX-2A Series cables), connect the HDMI source to

the INPUT port on the local transmitter unit.

3. Optional for B127A-1A1-BHBH: Using an HDMI 2.0 cable

(such as Tripp Lite P569-XXX-CERT or P568-XXX-2A Series

cables), connect a local monitor to the LOCALOUT port on

the B127A-1A1-BHBH local transmitter unit.

4. Optional: For extended range, connect a B127A-010-H

signal repeater unit to the transmitter and receiver via

Cat6 cabling. See B127A-010-H product features for more

information.

5. Using Cat6 cable, connect the RJ45 port on the local

transmitter unit to the RJ45 port on the remote receiver unit.

6. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT

or P568-XXX-2A Series cables), connect the remote receiver

unit’s HDMI port to a monitor.

7. Turn on the power to your connected TVs/monitors. The

LOCAL (orange) LED will illuminate to indicate the local port

has been connected to a display.

20-10-008-933D27-Book.indb 1120-10-008-933D27-Book.indb 11 4/21/2021 4:00:30 PM4/21/2021 4:00:30 PM

12

Standard Extender Kit Installation

8. Connect the external power supply to either the transmitter

or receiver unit. Plug it into an available wall outlet or a

Tripp Lite surge protector, power distribution unit (PDU) or

uninterruptible power supply (UPS). The POWER (green)

LED on the local transmitter unit will illuminate to indicate

the unit is receiving power from the external power supply.

The POWER (green) LED on the remote receiver unit will

illuminate to indicate the unit is receiving power from the

local transmitter unit through PoC technology.

9. Turn on the power to the HDMI source. The OUTPUT (orange)

LED on the local transmitter unit will illuminate to indicate a

signal is being received from the source.

10. The (orange) RJ45 LED will illuminate on both the local

transmitter and remote receiver units to indicate a signal is

being received from the source to display. The screen should

now display on the connected monitor(s).

20-10-008-933D27-Book.indb 1220-10-008-933D27-Book.indb 12 4/21/2021 4:00:30 PM4/21/2021 4:00:30 PM

13

Standard Extender Kit Installation

Notes:

1) Test to ensure the entire installation works properly before pulling

cables through ceilings/walls.

2) To achieve maximum distance and performance, use 24 AWG solid

wire Cat6 cable. Using stranded wire Cat6 cable or cable with a

gauge (AWG) size higher than 24 AWG will result in shorter extension

distance. Higher gauge cabling, such as 26 AWG, has a more limited

transmission capability than lower gauge cabling. All Tripp Lite

N202-Series Cat6 cables are made with 24 AWG solid wire cabling.

3) The installation diagram shows a B127A-1A1-BHPH unit.

4) External power is not required for remote receiver units due to Power

over Cable (PoC) technology incorporated in the transmitter units.

B127A-1A1-BHPH

extender kit

IR Control

Pad

IR Sensor

HDR Player

LOCAL / TRANSMITTER REMOTE / RECEIVER

Monitor

TV

Up to 230 ft. Cat6 solid cable at 4K/60 Hz

Up to 15 ft. HDMI 2.0 cable at 4K/60 Hz

Micro-USB cable

20-10-008-933D27-Book.indb 1320-10-008-933D27-Book.indb 13 4/21/2021 4:00:30 PM4/21/2021 4:00:30 PM

14

Standard Extender Kit Installation

1. Make sure all equipment in the installation—such as TVs,

Blu-ray players and the transmitter—is powered OFF.

2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT

or P568-XXX-2A Series cables), connect the HDMI source to

the INPUT port on the local transmitter unit.

3. Optional for B127A-1A1-BHPH: Using an HDMI 2.0 cable

(such as Tripp Lite P569-XXX-CERT or P568-XXX-2A Series

cables), connect a local monitor to the LOCALOUT port on

the B127A-1A1-BHPH local transmitter unit.

4. Optional: For extended range, connect a B127A-010-H

signal repeater unit to the transmitter and receiver via

Cat6 cabling. See B127A-010-H product features for

more information.

5. Using Cat6 cable, connect the RJ45 port on the local

transmitter unit to the RJ45 port on the remote receiver unit.

6.

Connect the remote receiver unit’s HDMI cable to a monitor/TV.

7. Turn on the power to your connected TVs/monitors. The

LOCAL (orange) LED will illuminate to indicate the local port

has been connected to a display.

20-10-008-933D27-Book.indb 1420-10-008-933D27-Book.indb 14 4/21/2021 4:00:30 PM4/21/2021 4:00:30 PM

15

Standard Extender Kit Installation

8. Connect the external power supply to the transmitter

unit. Plug it into an available wall outlet or a Tripp Lite

surge protector, power distribution unit or uninterruptible

power supply (UPS). The POWER (green) LED on the local

transmitter unit will illuminate to indicate the unit is receiving

power from the external power supply. The POWER (green)

LED on the remote receiver unit will illuminate to indicate the

unit is receiving power from the local transmitter unit through

PoC technology.

9. Turn on the power to the HDMI source. The OUTPUT (orange)

LED on the local transmitter unit will illuminate to indicate a

signal is being received from the source.

10. The (orange) RJ45 LED will illuminate on both local

transmitter and remote receiver units to indicate a signal

is being received from source to display. The screen should

now display on the connected monitor(s).

20-10-008-933D27-Book.indb 1520-10-008-933D27-Book.indb 15 4/21/2021 4:00:30 PM4/21/2021 4:00:30 PM

16

Standard Extender Kit Installation

Notes:

1) Test to ensure the entire installation works properly before pulling

cables through ceilings/walls.

2) To achieve maximum distance and performance, use 24 AWG solid

wire Cat6 cable. Using stranded wire Cat6 cable, or cable with a

gauge (AWG) size higher than 24 AWG, will result in shorter extension

distance. Higher gauge cabling, such as 26 AWG, has a more limited

transmission capability than lower gauge cabling. All Tripp Lite

N202-Series Cat6 cables are made with 24 AWG solid wire cabling.

3) The installation diagram shows a B127A-111-BHTH unit.

4) External power is not required for remote receiver units due to Power

over Cable (PoC) technology incorporated in the transmitter units.

B127A-111-BHTH

extender kit

IR Control

Pad

IR Control

Pad

IR Control

Pad

IR Sensor

IR Sensor IR Sensor

HDR Player

LOCAL / TRANSMITTER REMOTE / RECEIVER

Monitor

TV TV

Up to 230 ft. Cat6 solid cable at 4K/60 Hz

Up to 15 ft. HDMI 2.0 cable at 4K/60 Hz

Toslink cable

20-10-008-933D27-Book.indb 1620-10-008-933D27-Book.indb 16 4/21/2021 4:00:30 PM4/21/2021 4:00:30 PM

17

Standard Extender Kit Installation

1. Make sure all equipment in the installation—such as TVs,

Blu-ray players and the transmutter—is powered OFF.

2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT

or P568-XXX-2A Series cables), connect the HDMI source to

the INPUT port on the local transmitter unit.

3. Optional for B127A-111-BHTH: Using an HDMI 2.0 cable

(such as Tripp Lite P569-XXX-CERT or P568-XXX-2A Series

cables), connect a local monitor to the LOCALOUT port on

the B127A-111-BHTH local transmitter unit.

4. Using Cat6 cable, connect the RJ45 port on the local

transmitter unit to the RJ45 port on the remote receiver unit.

5. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT

or P568-XXX-2A Series cables), connect the remote receiver

or transceiver unit’s HDMI port to a monitor.

6. Turn on the power to your connected TVs/monitors. The

LOCAL (orange) LED will illuminate to indicate the local port

has been connected to a display.

20-10-008-933D27-Book.indb 1720-10-008-933D27-Book.indb 17 4/21/2021 4:00:30 PM4/21/2021 4:00:30 PM

18

Standard Extender Kit Installation

7. Connect the external power supply to the transmitter. Plug

it into an available wall outlet or a Tripp Lite surge protector,

power distribution or uninterruptible power supply (UPS).

The POWER (green) LED on the local transmitter unit will

illuminate to indicate the unit is receiving power from the

external power supply. The POWER (green) LED on the

remote receiver unit will illuminate to indicate the unit is

receiving power from the local transmitter unit through PoC

technology.

8. Turn on the power to the HDMI source. The OUTPUT (orange)

LED on the local transmitter unit will illuminate to indicate a

signal is being received from the source.

9. The (orange) RJ45 LED will illuminate on both the local

transmitter and remote receiver units to indicate a signal is

being received from the source to display. The screen should

now display on the connected monitor.

20-10-008-933D27-Book.indb 1820-10-008-933D27-Book.indb 18 4/21/2021 4:00:30 PM4/21/2021 4:00:30 PM

19

Transceiver Daisy-Chain Installation

(B127A-110-BH only)

Notes:

1) Test to ensure the entire installation works properly before pulling

cables through ceilings/walls.

2) To achieve maximum distance and performance, use 24 AWG solid

wire Cat5e/6 cable. Using stranded wire Cat5e/6 cable or cable

with a gauge (AWG) size higher than 24 AWG will result in shorter

extension distance. Higher gauge cabling, such as 26 AWG, has a

more limited transmission capability than lower gauge cabling. All

Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire

cabling.

3) The installation diagram shows the B127A-111-BHTH and

B17A-110-BH installation.

20-10-008-933D27-Book.indb 1920-10-008-933D27-Book.indb 19 4/21/2021 4:00:30 PM4/21/2021 4:00:30 PM

20

Transceiver Daisy-Chain Installation

(B127A-110-BH only)

B127A-110-BH

transceiver

IR Control

Pad

IR Control

Pad

IR Control

Pad

IR Control

Pad

IR Control

Pad

IR Sensor

Level 1

Level 2

Level 3

Level 4

HDR Player

Monitor

TV

Up to 230 ft. Cat6 solid cable at 4K/60 Hz

Up to 15 ft. HDMI 2.0 cable at 4K/60 Hz

Toslink cable

20-10-008-933D27-Book.indb 2020-10-008-933D27-Book.indb 20 4/21/2021 4:00:30 PM4/21/2021 4:00:30 PM

Страница загружается ...

Tripp Lite B127A-1A1-BHPH Инструкция по применению

Это руководство также подходит для

Tripp Lite B127A-1A1-BHPH Инструкция по применению

на других языках

Похожие модели бренда

Модели других брендов