15
IRON
USER GUIDE
SAFETY INFORMATION
For your safety and correct use of the iron, please read this manual carefully before using it,
and also save it for re-reading after transporting or selling the device. Improper handling of the
device can lead to its breakdown, cause material damage or cause harm to the health of the user.
ATTENTION! The manufacturer is not responsible for any damage caused by improper
use of the device or non-compliance with precautions and safety measures.
• The device is intended exclusively for use in domestic conditions.
• The device must be used only for its intended purpose in accordance with the instructions.
• When removing the device from the package, make sure that it is intact and there is no dam-
age. Keep the packaging materials away from children. Dispose of the packaging correctly.
• Inspect the appliance every time before turning it on. If there is damage to the device or the
power cord, do not plug the device into an outlet in any case.
• Do not use the device after a fall if there are visible signs of damage. The device must be
checked by a qualified specialist before use.
• Do not use the device if you are not sure of its operability.
• This device is not intended for use by people (including children) who have physical, ner-
vous or mental disabilities, or lack of experience and knowledge, except in cases when such
persons are supervised or instructed about the use of this device by a person responsible
for their safety. It is necessary to monitor children in order to prevent them from playing with
the device.
• Do not leave the iron connected to the network unattended on the ironing board.
• Do not leave the appliance unattended. Keep the device out of the reach of children.
• It is not safe to disassemble, repair a iron or make any changes to its design. Any damage
to the electrical wiring of the device can cause an electric shock, fire or short circuit. In case
of malfunctions, you should immediately contact an authorized service center, indicating
the type of problem and the model of your device. Only original spare parts can be used for
repairs. Unskilled repairs remove the device from warranty service.
ATTENTION! The iron is not designed for industrial use. The manufacturer is not
responsible for any damage caused by improper use of the device or noncompliance with
precautions and safety measures.
RISK OF ELECTRIC SHOCK
• The iron must be connected to the 220-240 V / 50 Hz power supply through a grounded outlet
with a current of at least 10A. Incorrect grounding or a deviation of the voltage parameters
by more than 10% can lead to unstable operation of the device or electric shock.
• Insert the plug of the power cord into the socket only after installing the device. Make sure
that there is free access to the plug.
• Do not touch the plug of the power supply cable with wet hands. Wipe the plug dry, clean
it from dust and carefully insert it into the socket. Dust, water, or weak contact can cause a
fire or electric shock.
• When moving, servicing or repairing, the iron must be disconnected from the power supply.
To disconnect, hold on to the plug, do not pull or pull the power cord.
• Do not use the appliance with a damaged power cord or outlet. Do not twist, bend or
increase the power cord. Do not place heavy objects on it. Make sure that the cord does not
touch sharp edges and heated surfaces.
• Do not use the iron outdoors, as well as in rooms with high humidity and at ambient
temperatures below 0°C. Do not expose it to rain, moisture, direct sunlight and other