Yamaha RX-S600 Руководство пользователя

English

AV Receiver

Owner’s Manual

Read the supplied booklet “Safety Brochure” before using the unit.

RX-S600_S600D_om.book Page 1 Tuesday, May 28, 2013 1:36 PM

En 2

CONTENTS

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

FEATURES 6

What you can do with the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Front display (indicators) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

PREPARATIONS 12

General setup procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

1 Placing speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2 Connecting speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

5.1-channel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Connecting front speakers that support bi-amp connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Connecting Zone2 speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Input/output jacks and cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

3 Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4 Connecting playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Connecting video devices (such as BD/DVD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Connecting audio devices (such as CD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Connecting to the jacks on the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

5 Connecting the radio antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

6 Connecting to a network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

7 Connecting audio recording devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

8 Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

9 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . . 31

10 Optimizing the speaker settings automatically (YPAO) . . . . . . . . . 32

Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Warning messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

PLAYBACK 36

Basic playback procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Selecting the input source and favorite settings with one touch

(SCENE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Configuring scene assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Selecting the sound mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Enjoying sound field effects (CINEMA DSP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Enjoying unprocessed playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Enjoying pure high fidelity sound (direct playback) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Enjoying compressed music with enhanced sound (Compressed Music Enhancer) . . . . . . . . . . . . . . . . . . .43

Enjoying surround sound with headphones (SILENT CINEMA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Listening to FM/AM radio (RX-S600) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Setting the frequency steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Selecting a frequency for reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Registering favorite radio stations (presets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Radio Data System tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Listening to DAB radio (RX-S600D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Preparing the DAB tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Selecting a DAB radio station for reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Registering favorite DAB radio stations (presets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Displaying the DAB information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Checking reception strength of each DAB channel label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Listening to FM radio (RX-S600D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

RX-S600_S600D_om.book Page 2 Tuesday, May 28, 2013 1:36 PM

En 3

Selecting a frequency for reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Registering favorite FM radio stations (presets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Radio Data System tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Playing back iPod music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Connecting an iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Playback of iPod content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Playing back music stored on a USB storage device . . . . . . . . . . . . . . . 60

Connecting a USB storage device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Playback of USB storage device contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Playing back music stored on media servers (PCs/NAS) . . . . . . . . . . . . 63

Media sharing setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Playback of PC music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Listening to Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Playing back iTunes/iPod music via a network (AirPlay) . . . . . . . . . . . 68

Playback of iTunes/iPod music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Playing back music in multiple rooms (multi-zone) . . . . . . . . . . . . . . . . 70

Preparing Zone2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Controlling Zone2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Viewing the current status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Switching information on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Configuring playback settings for different playback sources

(Option menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Option menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

CONFIGURATIONS 78

Configuring various functions (Setup menu) . . . . . . . . . . . . . . . . . . . . . . 78

Setup menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

ECO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92

Configuring the system settings (ADVANCED SETUP menu) . . . . . . . 93

ADVANCED SETUP menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

Changing the speaker impedance setting (SP IMP.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

Selecting the remote control ID (REMOTE ID) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

Changing the FM/AM tuning frequency setting (TU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94

Switching the video signal type (TV FORMAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Restoring the default settings (INIT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Updating the firmware (UPDATE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Checking the firmware version (VERSION) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94

Controlling external devices with the remote control . . . . . . . . . . . . . 95

Registering the remote control code for a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95

Registering the remote control codes for playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Resetting remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Updating the unit’s firmware via the network . . . . . . . . . . . . . . . . . . . . 98

APPENDIX 99

Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Power, system and remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

FM/AM radio (AM radio feature is available only on RX-S600.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

DAB radio (RX-S600D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

USB and network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

Error indications on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Audio information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

HDMI and video information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

Yamaha technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

Video signal flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

RX-S600_S600D_om.book Page 3 Tuesday, May 28, 2013 1:36 PM

En 4

Information on HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

HDMI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

HDMI signal compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Reference diagram (rear panel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

RX-S600_S600D_om.book Page 4 Tuesday, May 28, 2013 1:36 PM

Accessories En 5

Accessories

Check that the following accessories are supplied with the product.

 Remote control  Batteries (AAA, R03, UM-4) (x2)

 AM antenna (RX-S600)  FM antenna (RX-S600)

*One of the above is supplied depending on the region of

purchase.

 DAB/FM antenna (RX-S600D)  YPAO microphone

 CD-ROM

(Owner’s Manual)

 Easy Setup Guide  Safety Brochure

Insert the batteries the right

way round.

Operating range of the remote control

• Point the remote control at the remote control sensor on the unit and remain within the operating range

shown below.

• The illustrations of the main unit and remote control used in this manual are of the RX-S600 (U.S.A.

model), unless otherwise specified.

• Some features are not available in certain regions.

• Due to product improvements, specifications and appearance are subject to change without notice.

• This manual explains operations using the supplied remote control.

• This manual describes all the “iPod”, “iPhone” and “iPad” as the “iPod”. “iPod” refers to “iPod”, “iPhone”

and “iPad”, unless otherwise specified.

• indicates precautions for use of the unit and its feature limitations.

• indicates supplementary explanations for better use.

30° 30°

Within 6 m (20 ft)

RX-S600_S600D_om.book Page 5 Tuesday, May 28, 2013 1:36 PM

FEATURES ➤ What you can do with the unit En 6

FEATURES

What you can do with the unit

AV receiver (the unit)

Speakers

BD/DVD player

HDMI Control

Audio/Video

(via HDMI or MHL)

TV remote control

Audio

HDMI Control

Audio

Audio/Video

TV

Sequential operation of a TV,

AV receiver, and BD/DVD

player (HDMI Control)

. p.111

Change the input source

and favorite settings with

one touch (SCENE)

. p.37

Wide variety of supported content

• iPod/iPhone/iPad

. p.56

•USB

. p.60

• Media server (PC/NAS)

. p.63

• Internet radio

. p.66

•AirPlay

. p.68

iPod/iPhone/iPad

USB device

Audio

Network contents

Supports 2- to 5.1-channel speaker system.

Allows you to enjoy your favorite acoustic spaces

in various styles.

• Automatically optimizing the speaker

settings to suit your room (YPAO)

. p.32

• Reproducing stereo or multichannel

sounds with the sound fields like

actual movie theaters and concert

halls (CINEMA DSP)

. p.39

• Enjoying compressed music with

enhanced sound (Compressed Music

Enhancer)

. p.43

• Playing back music in multiple rooms

(multi-zone)

. p.70

3D and 4K Ultra HD signals

supported

Smartphone/Tablet

Control

RX-S600_S600D_om.book Page 6 Tuesday, May 28, 2013 1:36 PM

FEATURES ➤ What you can do with the unit En 7

Full of useful functions!

❑ Connecting various devices (p.24)

A number of HDMI jacks and various input/output jacks

on the unit allow you to connect video devices (such as

BD/DVD players), audio devices (such as CD players),

game consoles, camcorders, and other devices.

❑ Playing back TV audio in surround sound

with a single HDMI cable connection

(Audio Return Channel: ARC) (p.19)

When using an ARC -compatible TV, you only need one

HDMI cable to enable video output to the TV, audio input

from the TV, and the transmission of HDMI Control signals.

❑ Easy operation and wireless music

playback from iPhone or Android device

By using the application for smartphone/tablet “AV

CONTROLLER”, you can control the unit from an

iPhone, iPad, iPod touch or Android devices. Visit the

Yamaha website for details.

❑ Creating 3-dimensional sound fields (p.39)

The Virtual Presence Speaker (VPS) function allows you

to create a 3-dimensional sound field in your own room

(CINEMA DSP 3D).

❑ Enjoying pure high fidelity sound (p.42)

When the direct playback mode is enabled, the unit

plays back the selected source with the least circuitry,

which lets you to enjoy Hi-Fi sound quality.

❑ Listening to FM/AM radio (p.44)(RX-S600)

❑ Listening to DAB radio (p.48) and FM radio

(p.52) (RX-S600D)

❑ Easy operation with a TV screen

You can operate the iPod or USB storage device, view

information, or easily configure the settings using the

on-screen menu.

❑ Low power consumption

The ECO mode (power saving function) reduces the

unit’s power consumption and helps to create an

eco-friendly home theater system (p.88).

BD/DVD

player

Game

console

Camcorder

TV

Set-top box

HDMI Control

TV audio

Video from

external device

Useful tips

The combination of video/audio input jacks does not

match an external device...

Use “Audio In” in the “Option” menu to change the

combination of video/audio input jacks so that it matches

the output jack(s) of your external device (p.26).

Video and audio are not synchronized...

Use “Lipsync” in the “Setup” menu to adjust the delay

between video and audio output (p.86).

I want to hear audio from the TV speakers...

Use “Audio Output” in the “Setup” menu to select the

output destination of signals input into the unit (p.84).

Your TV speakers may be selected as an output

destination.

I want to use the supplied remote control to operate

external devices…

Register the remote control codes of the external

devices (such as a TV and BD/DVD players) (p.95).

I want to change the on-screen menu language...

Use “Language” in the “Setup” menu to select a

language from English, Japanese, French, German,

Spanish, Russian, Italian and Chinese (p.31).

I want to update the firmware...

Use “Network Update” (p.98) in the “Setup” menu or

“UPDATE” (p.94) in the “ADVANCED SETUP” menu to

update the unit’s firmware.

Many other settings are available that let you to

customize the unit. For details, see the following pages.

• SCENE settings (p.37)

• Sound/video settings and signal information for each

source (p.74)

• Various function settings (p.79)

• System settings (p.93)

RX-S600_S600D_om.book Page 7 Tuesday, May 28, 2013 1:36 PM

FEATURES ➤ Part names and functions En 8

Front panel

1 ZONE key

Enables/disables the audio output to Zone2 (p.71).

2 INFO key

Selects the information displayed on the front display (p.73).

3 Remote control sensor

Receives remote control signals (p.5).

4 Front display

Displays information (p.9).

5 DIRECT key

Enables/disables the direct playback mode (p.42).

6 INPUT knob

Select an input source.

7 z (power) key

Turns on/off (standby) the unit.

8 Standby indicator

Lights up when the unit is in standby mode under any of the

following conditions.

• HDMI Control is enabled (p.84)

• Standby Through is enabled (p.84)

• Network Standby is enabled (p.91)

• An iPod is being charged (p.56)

9 PHONES jack

For connecting headphones.

0 YPAO MIC jack

For connecting the supplied YPAO microphone (p.32).

A STRAIGHT key

Enables/disables the straight decode mode (p.41).

B PROGRAM keys

Select a sound program or a surround decoder (p.38).

C SCENE keys

Select the registered input source and sound program with

one touch. Also, turns on the unit when it is in standby mode

(p.37).

D VIDEO AUX jacks

For connecting devices, such as camcorders and game

consoles (p.27).

E USB jack

For connecting a USB storage device (p.60) or an iPod

(p.56).

F VOLUME knob

Adjusts the volume.

Part names and functions

INFO

DIRECT

V

O

L

U

M

E

ZONE

INPUT

PHONES

SILENT CINEMA

YPAO MIC

STRAIGHT

BD/DVD

TV NET RADIO

VIDEO AUX

SCENE

AUDI O VID EO

PROGRA

M

5V

2.1A

2 31

7 8

4 5

6

F9:

A EDBC

(RX-S600 U.S.A. model)

RX-S600_S600D_om.book Page 8 Tuesday, May 28, 2013 1:36 PM

FEATURES ➤ Part names and functions En 9

Front display (indicators)

1 HDMI

Lights up when HDMI signals are being input or output.

OUT

Lights up when HDMI signals are being output.

2 CINEMA DSP

Lights up when CINEMA DSP (p.39) is working.

CINEMA DSP n

Lights up when CINEMA DSP 3D (p.41) is working.

3 ENHANCER

Lights up when Compressed Music Enhancer (p.43) is

working.

4 ADAPTIVE DRC

Lights up when Adaptive DRC (p.75) is working.

5 STEREO

Lights up when the unit is receiving a stereo FM radio signal.

TUNED

Lights up when the unit is receiving an FM/AM radio station

(RX-S600) or FM radio station (RX-S600D) signal.

6 PARTY

Lights up when the unit is in the party mode. (p.72)

7 SLEEP

Lights up when the sleep timer is on.

8 ZONE2

Lights up when audio output to Zone2 is enabled (p.70).

9 MUTE

Blinks when audio is muted.

0 Volume indicator

Indicates the current volume.

A Cursor indicators

Indicate the remote control cursor keys currently operational.

B Information display

Displays the current status (such as input name and sound

mode name). You can switch the information by pressing

INFO (p.73).

C Speaker indicators

Indicate speaker terminals from which signals are output.

L Subwoofer

A Front speaker (L)

S Front speaker (R)

D Center speaker

F Surround speaker (L)

G Surround speaker (R)

SW

C

LR

SL SR

VOL.

MUTE

ENHANCER

ADAPTIVE DRC

STEREO

3

TUNED

SLEEP

OUT

PARTY

2

ZONE

1234679:5 8

A AB C

RX-S600_S600D_om.book Page 9 Tuesday, May 28, 2013 1:36 PM

FEATURES ➤ Part names and functions En 10

Rear panel

1 HDMI OUT jack

For connecting to an HDMI-compatible TV and outputting

video/audio signals (p.19). When using ARC, TV audio signal

can also be input through the HDMI OUT jack.

2 HDMI 1–4 jacks

For connecting to HDMI-compatible playback devices and

inputting video/audio signals (p.24).

3 HDMI 5/MHL jack

For connecting to an HDMI- or MHL-compatible playback

device and inputting video/audio signals (p.24).

4 ANTENNA jacks

For connecting the radio antennas (p.28).

5 DC OUT jack

For supplying power to a Yamaha AV accessory. For details

on connections, refer to the instruction manual of the AV

accessory.

6 NETWORK jack

For connecting to a network (p.29).

7 Power cable

For connecting to an AC wall outlet (p.30).

8 AV 1–5 jacks

For connecting to video/audio playback devices and

inputting video/audio signals (p.24).

9 AUDIO 1–2 jacks

For connecting to an audio playback device and inputting

audio signals (p.27).

0 AUDIO OUT jacks

For outputting audio to a recording device (such as a tape

deck) (p.30).

A SUBWOOFER PRE OUT jack

For connecting to a subwoofer (with built-in amplifier) (p.16).

B MONITOR OUT jacks

COMPONENT VIDEO jacks:

For connecting to a TV that supports component video and

outputting video signals (p.23).

VIDEO jack:

For connecting to a TV that supports composite video and

outputting video signals (p.23).

C SPEAKERS terminals

For connecting to speakers (p.16).

D VOLTAGE SELECTOR

(General model only)

Selects the switch position according to your local voltage

(p.30).

SPEAKERS

CENTER

EXTRA SP

FRONT

NETWORK

DC OUT

AV

5

AUDI O

2

AUDI O

OUT

COMPONENT

VIDEO

MONITOR

OUT

SUBWOOFER

PRE OUT

AV

4

AV

1

OPTICAL

COAXIAL

AUDIO 1

(

TV

)

COAXIAL

VIDEO

CONPONENT

VIDEO

YPB PR

AV

2

AV

3

HDMI 4HDMI 3HDMI 2HDMI 1

HDMI

OUT

ARC

(

BD/DVD

)

HDMI 5

SURROUND / ZONE 2

/BI-AMP

MHL

5V

1A

5V

0.5A

(

NET

)

YPB

PR

ANTENNA

AM

FM

75

(

RADIO

)

C: A B

1

3 6 752

8

D

4

9

* The area around the video/audio output jacks is

marked in white on the actual product to

prevent improper connections.

(RX-S600 U.S.A. model)

RX-S600_S600D_om.book Page 10 Tuesday, May 28, 2013 1:36 PM

FEATURES ➤ Part names and functions En 11

Remote control

1 Remote control signal transmitter

Transmits infrared signals.

2 SOURCE z key

Turns on/off an external device.

SOURCE key

Sets the remote control to operate external devices (p.96).

This key lights up in green after pressed.

RECEIVER key

Sets the remote control to operate the unit (p.96). This key

lights up in orange after pressed.

RECEIVER z key

Turns on/off (standby) the unit.

3 Input selection keys

Select an input source for playback.

HDMI 1–4 HDMI 1–4 jacks

HDMI 5 HDMI 5/MHL jack

AV 1–5 AV 1–5 jacks

AUDIO 1–2 AUDIO 1–2 jacks

V-AUX VIDEO AUX jack (on the front panel)

USB USB jack (on the front panel)

NET NETWORK jack (press repeatedly to select a

desired network source)

FM FM radio

AM AM radio (RX-S600)

DAB DAB radio (RX-S600D)

4 MAIN/ZONE2 switch

Changes the zone (main zone or Zone2) that is controlled by

the remote control (p.71).

5 SCENE keys

Select the registered input source, sound program, and

various settings with one touch. Also, turns on the unit when

it is in standby mode (p.37).

6 PROGRAM keys

Select a sound program (p.38).

7 External device operation keys

Select menus for external devices (p.96).

8 SETUP key

Displays the setup menu (p.78).

9 Menu operation keys

Cursor keys Select a menu or a parameter.

ENTER Confirms a selected item.

RETURN Returns to the previous screen.

0 MODE key

Switchesd between “Stereo” and “Mono” for FM radio

reception (p.44, p.52).

Switches the iPod operation modes (p.58).

A Radio keys

Operate the FM/AM/DAB radio when “TUNER” is selected as

the input source (p.44, p.48, p.52).

MEMORY Registers radio stations as presets.

PRESET Select a preset station.

TUNING Select the radio frequency.

External device operation keys

Let you play back and perform other operations for external

devices when an input source other than “TUNER” is

selected (p.96).

B Sound mode keys

Select a sound mode (p.38).

C INFO key

Selects the information displayed on the front display (p.73).

D SLEEP key

Switches the unit to standby mode automatically after a

specified period of time has elapsed (sleep timer). Press

repeatedly to set the time (120 min, 90 min, 60 min, 30 min, off).

E Numeric keys

Let you enter numerical values, such as radio frequencies.

F TV operation keys

Let you select TV input and volume, and perform other TV

operations (p.95).

G PARTY key

Turns on/off the party mode (p.72).

H VOLUME keys

Adjust the volume.

I MUTE key

Mutes the audio output.

J OPTION key

Displays the option menu (p.74).

K CODE SET key

Registers remote control codes of external devices on the

remote control (p.95).

• To operate external devices with the remote control, register a

remote control code for each device before using (p.95).

TV VOL TV CH

TV

INPUT

MUTE

CODE SET

90

10

ENT

5

687

1234

MOVIE

ENHANCER

TUNING PRESET

MEMORY

DISPLAYRETURN

ENTER

SETUP OPTION

TOP MENU

MUTE

PROGRAM VOLUME

POP-UP/MENU

DIRECT

STRAIGHT

INFO SLEEP

MUSIC

FM

PARTY

MAIN

ZONE 2

NET

MODE

SCENE

BD

DVD

TV

NET

RADIO

SOURCE

RECEIVER

HDMI

AV

AUDIO

5

4

1234

12

52

31

SUR. DECODE

V-AUX

USB

AM

G

I

J

K

1

3

2

5

4

6

H

7

E

D

F

8

A

B

:

C

9

(RX-S600)

RX-S600_S600D_om.book Page 11 Tuesday, May 28, 2013 1:36 PM

PREPARATIONS ➤ General setup procedure En 12

PREPARATIONS

This completes all the preparations. Enjoy playing movies, music, radio and other content with the unit!

General setup procedure

1 Placing speakers (p.13)

Select the speaker layout for the number of speakers that you are using and place them in your room.

2 Connecting speakers (p.16)

Connect the speakers to the unit.

3 Connecting a TV (p.19)

Connect a TV to the unit.

4 Connecting playback devices (p.24)

Connect video devices (such as BD/DVD players) and audio devices (such as CD players) to the unit.

5 Connecting the radio antennas (p.28)

Connect the supplied FM/AM/DAB antennas to the unit.

6 Connecting to a network (p.29)

Connect the unit to a network.

7 Connecting audio recording devices (p.30)

Connect audio recording devices to the unit.

8 Connecting the power cable (p.30)

After all the connections are complete, plug in the power cable.

9

Selecting an on-screen menu language

(p.31)

Select the desired on-screen menu language (default: English).

10

Optimizing the speaker settings

automatically (YPAO) (p.32)

Optimize the speaker settings, such as volume balance and acoustic parameters, to suit your room

(YPAO).

RX-S600_S600D_om.book Page 12 Tuesday, May 28, 2013 1:36 PM

PREPARATIONS ➤ Placing speakers En 13

Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer in your room. This section describes the representative speaker layout

examples.

• You can use the Zone2 function or bi-amp connections simultaneously with the 2.1- or 3.1-channel system.

1 Placing speakers

Caution

• Under its default settings, the unit is configured for 6-ohm speakers. When connecting speakers with impedance of 8 ohm or more, set the unit’s speaker impedance to “8  MIN”. For details, see “Setting the speaker

impedance” (p.15).

Speaker type Abbr. Function

Speaker system (the number of channels)

5.1 4.1 3.1 2.1

Front (L) 1

Produce front right/left channel sounds (stereo sounds).

●●●●

Front (R) 2 ●●●●

Center 3 Produces center channel sounds (such as movie dialogue and vocals). ●●

Surround (L) 4

Produce surround right/left channel sounds.

●●

Surround (R) 5 ●●

Subwoofer 9

Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.

This channel is counted as “0.1”.

●●●●

1 2 3 4 5 6 7 8 9 10

RX-S600_S600D_om.book Page 13 Tuesday, May 28, 2013 1:36 PM

PREPARATIONS ➤ Placing speakers En 14

5.1-channel system

4.1-channel system

3.1-channel system

2.1-channel system

45

12

39

10° to 30°10° to 30°

45

12

9

10° to 30°10° to 30°

12

39

12

9

1 2 3 4 5 6 7 8 9 10

RX-S600_S600D_om.book Page 14 Tuesday, May 28, 2013 1:36 PM

PREPARATIONS ➤ Placing speakers En 15

■ Setting the speaker impedance

Under its default settings, the unit is configured for 6-ohm speakers. When connecting

speakers with impedance of 8 ohm or more, set the speaker impedance to “8  MIN”.

1

Before connecting speakers, connect the power cable to an AC wall

outlet.

2

While holding down STRAIGHT on the front panel, press z (power).

3

Check that “SP IMP.” is displayed on the front display.

4

Press STRAIGHT to select “8  MIN”.

5

Press z (power) to set the unit to standby mode and remove the

power cable from the AC wall outlet.

You are now ready to connect the speakers.

z (power) STRAIGHT

SPIMP.6MIN

1 2 3 4 5 6 7 8 9 10

RX-S600_S600D_om.book Page 15 Tuesday, May 28, 2013 1:36 PM

PREPARATIONS ➤ Connecting speakers En 16

Connect the speakers placed in your room to the unit.

The following diagrams provide connections for

5.1-channel system as examples. For other systems,

connect speakers while referring to the connection

diagram for the 5.1-channel system.

Cables required for connection

(commercially available)

Speaker cables (x the number of speakers)

Audio pin cable (x1: for connecting a subwoofer)

5.1-channel system

■ Connecting speaker cables

Speaker cables have two wires. One is for connecting

the negative (-) terminal of the unit and the speaker, and

the other is for the positive (+) terminal. If the wires are

colored to prevent confusion, connect the black wire to

the negative and the other wire to the positive terminal.

a Remove approximately 10 mm (3/8”) of insulation from

the ends of the speaker cable and twist the bare wires of

the cable firmly together.

b Loosen the speaker terminal.

c Insert the bare wires of the cable into the gap on the side

(upper right or bottom left) of the terminal.

d Tighten the terminal.

Using a banana plug

(U.S.A., Canada, China, Australia and General models only)

a Tighten the speaker terminal.

b Insert a banana plug into the end of the terminal.

2 Connecting speakers

Caution

• Remove the unit’s power cable from an AC wall outlet and turn

off the subwoofer before connecting the speakers.

• Ensure that the core wires of the speaker cable do not touch

one another or come into contact with the unit’s metal parts.

Doing so may damage the unit or the speakers. If the speaker

cables short circuit, “Check SP Wires” will appear on the front

display when the unit is turned on.

–

+

–

+

SPEAKERS

CENTER

EXTRA SP

FRONT

DC OUT

COMPONENT

VIDEO

MONITOR

OUT

SUBWOOFER

PRE OUT

SURROUND / ZONE 2

/BI-AMP

5V

0.5A

YPB PR

A

AM

FM

75

12

3

45

9

The unit (rear)

FRONT

-

+

aa

b

d

c

+ (red)

- (black)

FRONT

+

a

b

Banana plug

1 2 3 4 5 6 7 8 9 10

RX-S600_S600D_om.book Page 16 Tuesday, May 28, 2013 1:36 PM

PREPARATIONS ➤ Connecting speakers En 17

■ Connecting the subwoofer

(with built-in amplifier)

Use an audio pin cable to connect the subwoofer.

Connecting front speakers that

support bi-amp connections

When using front speakers that support bi-amp

connections, connect them to the FRONT jacks and

SURROUND/ZONE 2/BI-AMP jacks.

To enable the bi-amp function, set “Power Amp Assign”

(p.81) in the “Setup” menu to “BI-AMP” after connecting

the power cable to an AC wall outlet.

• The FRONT jacks and SURROUND/ZONE 2/BI-AMP jacks output

the same signals.

Connecting Zone2 speakers

The Zone2 function allows you to playback an input

source in the room where the unit is installed (main

zone) and in another room (Zone2). To connect the

Zone2 speakers, see “Playing back music in multiple

rooms” (p.70).

PRE OUT

SUBWOOFER

AUDIO OUT

AUDIO 2

Audio pin cable

12

3

9

SPEAKERS

CENTER

EXTRA SP

FRONT

SURROUND / ZONE 2

/BI-AMP

The unit (rear)

Caution

• Before making bi-amp connections, remove any brackets or

cables that connect a woofer with a tweeter. Refer to the

instruction manual of the speakers for details. If you are not

making bi-amp connections, make sure that the brackets or

cables are connected before connecting the speaker cables.

• Surround speakers cannot be used during bi-amp connections.

1 2 3 4 5 6 7 8 9 10

RX-S600_S600D_om.book Page 17 Tuesday, May 28, 2013 1:36 PM

PREPARATIONS ➤ Input/output jacks and cables En 18

■ Video/audio jacks

❑ HDMI jacks

Transmit digital video and digital sound through a single

jack. Use an HDMI cable.

• Use a 19-pin HDMI cable with the HDMI logo. We recommend using

a cable less than 5.0 m (16.4 ft) long to prevent signal quality

degradation.

• The unit’s HDMI jacks support the HDMI Control, Audio Return

Channel (ARC), and 3D and 4K Ultra HD video transmission

(through output) features.

• Use high speed HDMI cables to enjoy 3D or 4K Ultra HD videos.

❑ HDMI/MHL jack

Transmit digital video and digital sound. Use an MHL

cable.

• The HDMI 5/MHL jack of the unit supports both HDMI and MHL

connections. Use a cable that matches the jack on your

MHL-compatible mobile device. When connecting an

HDMI-compatible playback device to the jack, use an HDMI cable.

For details on an MHL connection, see “MHL connection” (p.24).

■ Video jacks

❑ COMPONENT VIDEO jacks

Transmit video signals separated into three

components: luminance (Y), chrominance blue (P

B),

and chrominance red (P

R). Use a component video

cable with three plugs.

❑ VIDEO jacks

Transmit analog video signals. Use a video pin cable.

■ Audio jacks

❑ OPTICAL jacks

Transmit digital audio signals. Use a digital optical

cable. Remove the tip protector (if available) before

using the cable.

❑ COAXIAL jacks

Transmit digital audio signals. Use a digital coaxial

cable.

❑ AUDIO jacks

(Stereo L/R jacks)

Transmit analog stereo audio signals. Use a stereo pin

cable (RCA cable).

(Stereo mini jack)

Transmits analog stereo audio signals. Use a stereo

mini-plug cable.

Input/output jacks and cables

HDMI cable

HDMI 5

5V

MHL

1A

MHL cable

Component video cable

Video pin cable

AV 1

OPTICAL

Digital optical cable

AV 1

Digital coaxial cable

AUDIO 2

Stereo pin cable

AUDIO

Stereo mini-plug cable

RX-S600_S600D_om.book Page 18 Tuesday, May 28, 2013 1:36 PM

PREPARATIONS ➤ Connecting a TV En 19

Connect a TV to the unit so that video input to the unit can be output to the TV.

You can also enjoy playback of TV audio on the unit.

The connection method varies depending on the functions and video input jacks

available on your TV.

Refer to the instruction manual of the TV and choose a connection method.

■

Connection Method 1 (HDMI Control/ARC-compatible TV)

Connect the TV to the unit with an HDMI cable.

• The following explanation is based on the assumption that you have not changed the “HDMI” parameters

(p.84) in the “Setup” menu.

• Use an HDMI cable that supports ARC.

• By connecting a TV to the unit with an HDMI cable, you can navigate the iPod, USB storage device and

network sources, or configure the settings of the unit with the menu displayed on the TV.

3 Connecting a TV

When connecting a video device with an analog video output

• If you will connect any video device to the AV 1–2 (COMPONENT VIDEO) jacks of the unit, you also

need to connect the TV to the MONITOR OUT (COMPONENT VIDEO) jacks (p.23).

• If you will connect any video device to the AV 3–5 (VIDEO) jacks or the VIDEO AUX (VIDEO) of the

unit, you also need to connect the TV to the MONITOR OUT (VIDEO) jack (p.23).

When using a set-top box to watch TV

• Connect the set-top box to the unit in the same way as playback devices (p.24). If you will receive TV

broadcasts only from the set-top box, you do not need to make an audio cable connection between the

TV and the unit or configure the ARC setting.

Does your TV support

Audio Return Channel (ARC)?

Does your TV support

HDMI Control?

Does your TV have an

HDMI input jack?

■ Connection Method 3 (p.22)

■ Connection Method 2 (p.21)

■ Connection Method 1 (p.19)

■ Connection Method 4 (p.23)

Yes

No

About HDMI Control

HDMI Control allows you to operate external devices via HDMI. If you connect a TV

that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s

power and volume with the TV’s remote control. You can also control playback

devices (such as an HDMI Control-compatible BD/DVD player) connected to the

unit with an HDMI cable. For details, see “HDMI Control” (p.111).

About Audio Return Channel (ARC)

ARC allows audio signals to travel both ways under HDMI Control. If you connect a

TV that supports HDMI Control and ARC to the unit with a single HDMI cable, you

can output video/audio to the TV or input TV audio to the unit.

AV

5

AUDI

O

AV

4

AV

1

OPTICAL

COAXIAL

AUDIO 1

(

TV

)

COAXIAL

VIDEO

CONPONENT

VIDEO

YPB PR

AV

2

AV

3

H

HDMI 2HDMI 1

HDMI

OUT

ARC

(

BD/DVD

)

HDMI

ARC

HDMI

OUT

ARC

HDMI

HDMI OUT jack

HDMI input

(ARC-compatible)

The unit (rear)

TV

1 2 3 4 5 6 7 8 9 10

RX-S600_S600D_om.book Page 19 Tuesday, May 28, 2013 1:36 PM

PREPARATIONS ➤ Connecting a TV En 20

❑ Necessary settings

To use HDMI Control and ARC, you need to configure the following settings.

For details on settings and operating your TV, refer to the instruction manual for the TV.

1

After connecting external devices (such as a TV and playback devices)

and the power cable to the unit, turn on the unit, TV, and playback devices.

2

Configure the settings of the unit.

a Check that ARC is enabled on the TV.

b Switch the TV input to display video from the unit.

c Press SETUP.

d Use the cursor keys to select “HDMI” and press ENTER.

e Press ENTER again.

f Use the cursor keys (q/w) to select “HDMI Control” and the cursor keys (e/r) to

select “On” as shown below.

g Press SETUP.

3

Configure the settings for HDMI Control.

a Enable HDMI Control on the TV and playback devices (such as HDMI

Control-compatible BD/DVD player).

b Turn off the TV’s main power and then turn off the unit and playback devices.

c Turn on the unit and playback devices and then turn on the TV’s main power.

d Switch the TV input to display video from the unit.

e Check the following.

On the unit: The input to which the playback device is connected is selected. If not,

select the input source manually.

On the TV: The video from the playback device is displayed.

f Check that the unit is properly synchronized with the TV by turning off the TV or

adjusting the TV volume with the TV remote control.

This completes the necessary settings.

If you select a TV program with the TV remote control, the input source of the unit will be

automatically switched to “AUDIO 1” and the TV audio will be played back on the unit.

If you cannot hear the TV’s audio, check that “ARC” (p.85) in the “Setup” menu is set to

“On”.

• If HDMI Control does not work properly, try turning off and on (or unplugging and then plugging in again)

the devices. It may solve the problem.

• If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on

the TV.

• If the audio is interrupted while using ARC, set “ARC” (p.85) in the “Setup” menu to “Off” and use a digital

optical cable to input TV audio to the unit (p.21).

• “AUDIO 1” is set as TV audio input at the factory. If you have connected any external device to the AUDIO 1

jacks, use “TV Audio Input” (p.84) in the “Setup” menu to change the TV audio input assignment. To use the

SCENE function (p.37), you also need to change the input assignment for SCENE(TV).

DISPLAYRETURN

ENTER

SETUP OPTION

TOP MENU

POP-UP/MENU

D

I

S

PL

A

Y

RETURN

O

PTI

O

N

T

O

P MEN

U

PO

P-UP

/

MENU

Cursor keys

ENTER

SETUP

Setup

Speaker

HDMI

Sound

ECO

Function

Network

Language

Configuration

HDMI Control

Audio Output

Standby Through

TV Audio Input

Standby Sync

ARC

SCENE

On

Auto

AUDIO 1

Auto

On

Back: RETURN

1 2 3 4 5 6 7 8 9 10

RX-S600_S600D_om.book Page 20 Tuesday, May 28, 2013 1:36 PM

Страница загружается ...

Yamaha RX-S600 Руководство пользователя

Это руководство также подходит для

Yamaha RX-S600 Руководство пользователя

на других языках

Похожие модели бренда