Yamaha DVD-S663 Инструкция по применению

DVD PLAYER

F

DVD-S663

3139 245 30211

00cv_DVD-S663_F.fm Page 1 Monday, June 9, 2008 1:40 PM

Black process 45.0° 240.0 LPI

i En

ii En

CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein may

result in hazardous radiation exposure.

ПРЕДОСТЕРЕЖЕНИЕ

Использование органов управления или

произведение настроек или выполнение

процедур, не указанных в данной

инструкции, может отразиться на

выделении опасной радиации.

CAUTION

VISIBLE AND INVISIBLE LASER RADIATION

WHEN OPEN. AVOID EXPOSURE TO BEAM.

DANGER

VISIBLE AND INVISIBLE LASER RADIATION WHEN

OPEN. AVOID DIRECT EXPOSURE TO BEAM.

ПРЕДУПРЕЖДЕНИЕ

ПPИ OTKPЫTИИ УCTPOЙCTBA BЫ MOЖETE

ПОДBEPГHУTБСЯ ВОЗДЕЙСТВИЮ BИДИMOГO

И HEBИДИMOГO ЛAЗEPHOГO ИЗЛУЧEHИЯ.

ИЗБЕГAИTE BOЗДЕЙСТВИЯ ЛУЧA.

AVOID DIRECT EXPOSURE TO THE BEAM

INVISIBLE LASER RADIATION WHEN OPEN

DANGER:

DO NOT STARE INTO BEAM

INVISIBLE LASER RADIATION WHEN OPEN

CAUTION:

iii En

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this unit in a well ventilated, cool, dry, clean

place — away from direct sunlight, heat sources,

vibration, dust, moisture, or cold. In a cabinet, allow

about 2.5 cm (1 inch) of free space all around this

unit for adequate ventilation.

3 Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

4 Do not expose this unit to sudden temperature

changes from cold to hot, nor locate this unit in an

environment with high humidity (i.e., a room with a

humidifier) to prevent condensation inside this unit,

which may cause an electrical shock, fire, damage

to this unit, and/or personal injury.

5 Avoid installing this unit in a location where foreign

objects may fall onto this unit or where this unit

may be exposed to liquid dripping or splashing. On

the top of this unit, do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

– Burning objects (i.e., candles), as they may

cause fire, damage to this unit, and/or

personal injury.

– Containers with liquid in them, as they may

fall, spilling the liquid and causing an electrical

shock to the user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If

the temperature inside this unit rises, it may cause

fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may

overheat, possibly causing damage.

9 Do not use excessive force on switches, knobs and/

or cords.

10 When disconnecting the power cord from the wall

outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12 Use only the voltage specified on this unit. Using

this unit with a higher voltage than specified is

dangerous and may cause fire, damage to this unit,

and/or personal injury. Yamaha will not be held

responsible for any damage resulting from use of

this unit with a voltage other than as specified.

13 Do not attempt to modify or fix this unit. Contact

qualified Yamaha service personnel when any

service is needed. The cabinet should never be

opened for any reason.

14 When not planning to use this unit for long periods

of time (i.e., vacation), disconnect the AC power

plug from the wall outlet.

15 Be sure to read the “Troubleshooting” section on

common operating errors before concluding that

this unit is faulty.

16 Before moving this unit, press STANDBY/ON to

set the unit in standby mode, then disconnect the

AC power plug from the wall outlet.

17 Install this unit near the AC outlet and where the AC

power plug can be reached easily.

18 The batteries shall not be exposed to excessive heat

such as sunshine, fire or the like.

LASER SAFETY

This unit employs a laser. Due to possible eye injury,

only a qualified service person should remove the cover

or attempt to service this device.

DANGER

This unit emits visible laser radiation when open. Avoid

direct eye exposure to beam.

When this unit is plugged into a wall outlet, do not

place your eyes close to the opening of the disc tray and

other openings or look inside.

CAUTION: READ THIS BEFORE OPERATING THIS UNIT.

The unit is not disconnected from the AC power

source as long as it is connected to the wall outlet,

even if this unit itself is turned off. This state is called

the standby mode. In this state, this unit is designed

to consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

Contents

English

1 En

Introduction ...................................3

About this manual........................................3

Supplied accessories ..................................3

Region codes ...............................................3

Playable disc formats ..................................4

Cleaning discs..............................................4

Patent information .......................................5

Functional Overview .....................6

Front panel ...................................................6

Rear panel.....................................................7

Remote control.............................................8

Connections...................................9

General notes on connections ...................9

Audio connections.......................................9

Digital connection ...............................................9

Analog connection...............................................9

Video connections .....................................10

Component video jacks <A>.............................10

S-video jack <B>...............................................10

Composite video jack <C>................................10

SCART terminal <D>

(Europe and Russia models only)......................10

HDMI connection........................................11

HDMI jack.........................................................11

Other connections .....................................12

USB port............................................................12

Remote control jacks.........................................12

Getting Started ............................13

Step 1: Inserting batteries into the remote

control ......................................................13

Using the remote control...................................13

Step 2: Turning on the power ...................13

Step 3: Setting a TV type/display and

language...................................................14

Setting a color system for your TV ...................14

Setting an aspect ratio for your TV ...................15

Setting the OSD Language................................15

Setting the audio, subtitle, and disc menu

languages (DVD-Video only) ...........................16

Playback Operation .................... 17

Basic operation.......................................... 17

Selecting a track/chapter...................................17

Searching backward/forward ............................17

Repeat/Shuffle functions .......................... 17

Repeat/Shuffle playback ...................................17

Repeating a section within a chapter/track .......18

Operations for video playback

(DVD/VCD/SVCD)..................................... 18

Using the disc menu..........................................18

Playback in slow motion...................................18

Zooming pictures in/out....................................18

Resuming playback from the last stopped point

...........................................................................18

Using the on-screen display (OSD) ..................19

Special DVD features ................................ 20

Playing by title ..................................................20

Selecting an audio language/format and subtitle

language ............................................................20

Special VCD/SVCD features...................... 20

Using the playback control (PBC) menu ..........20

Playing data discs

(MP3/WMA/WMV/JPEG/DivX

®

)............... 21

Selecting a folder and track/file ........................21

Special picture disc features.................... 21

Using the preview function...............................21

Zooming pictures in/out....................................22

Playback with multi-angles...............................22

Playing MP3 music and JPEG pictures

simultaneously ..................................................22

Special DivX

®

features.............................. 22

Using the interactive menu ...............................22

Selecting an audio/subtitle language.................22

Using a USB device................................... 23

Supported USB devices ....................................23

Playing data files...............................................23

Contents

Continued

Contents

2 En

Setup Menu..................................25

Menu overview ...........................................25

Setup menu operation ...............................27

General setup menu ..................................28

Locking/Unlocking the disc for viewing...........28

Recording CD tracks onto your USB device ....28

Programming disc tracks

(except MP3/WMA/WMV/JPEG/DivX

®

)........30

Dimming the front panel display.......................30

OSD language ...................................................30

Setting the screen saver .....................................31

Setting the sleep timer.......................................31

Displaying the DivX

®

VOD registration code

...........................................................................31

Audio setup menu......................................31

Setting the analog output...................................31

Setting the digital output ...................................32

Turning the HDMI audio on/off........................32

Turning the night mode on/off ..........................33

Video setup menu ......................................33

TV type..............................................................33

Setting the TV display.......................................33

Turning the progressive scan function on/off ...34

Adjusting picture settings..................................34

Turning the black level on/off...........................35

Turning the closed caption on/off .....................35

Switching YUV/RGB

(Europe and Russia models only)......................36

Setting the HDMI video ....................................36

Preference setup menu .............................37

Audio, subtitle and disc menu...........................37

Restricting playback with parental control........37

Selecting playback of VR format ......................38

Selecting the data disc menu .............................38

Selecting DivX

®

external subtitle group

(except Korea model)........................................38

Selecting the PBC (playback control) function

...........................................................................39

Setting the auto standby function ......................39

Changing the password .....................................40

Resetting the system..........................................40

Language Codes ......................... 41

Troubleshooting.......................... 42

Glossary....................................... 46

Specifications.............................. 48

Europe model

Information for Users on Collection and

Disposal of Old Equipment and used Batteries

These symbols on the products, packaging,

and/or accompanying documents mean that

used electrical and electronic products and

batteries should not be mixed with general

household waste. For proper treatment,

recovery and recycling of old products and

used batteries, please take them to applicable

collection points, in accordance with your

national legislation and the Directives 2002/

96/EC and 2006/66/EC. This symbol mark is

according to the EU directive 2002/96/EC.

By disposing of these products and batteries

correctly, you will help to save valuable

resources and prevent any potential negative

effects on human health and the environment

which could otherwise arise from

inappropriate waste handling.

For more information about collection and

recycling of old products and batteries, please

contact your local municipality, your waste

disposal service or the point of sale where

you purchased the items.

[Information on Disposal in other

Countries outside the European

Union]

These symbols are only valid in the European

Union. If you wish to discard these items,

please contact your local authorities or dealer

and ask for the correct method of disposal.

Note for the battery symbol (bottom

two symbol examples):

This symbol might be used in combination

with a chemical symbol. In this case it

complies with the requirement set by the

Directive for the chemical involved.

3 En

Introduction

English

Thank you for purchasing this unit. This

owner’s manual explains the basic operation

of this unit.

• Illustrations in this manual are based on the

Europe model unless otherwise specified.

• Notes contain important information about

safety and operating instructions.

• y indicates a tip for your operation.

• This manual is printed prior to production.

Design and specifications are subject to

change in part as a result of improvements,

etc. In case of differences between the

manual and the product, the product has

priority.

For Europe and Russia models

• Remote control

• Two batteries (AAA, R03, UM-4) for the

remote control

• RCA stereo cable

• Composite video cable

For U.S.A., Canada, Central and South

America, Australia, Asia, and Korea

models

• Remote control

• Two batteries (AAA, R03, UM-4) for the

remote control

• Audio/video cable

This unit is designed to support the region

management system. Check the regional code

number on the DVD disc package. If the

number does not match the region code of this

unit (see the table below or the back of this

unit), this unit may be unable to play the disc.

About this manual

Supplied accessories

Region codes

Destination

Region

code of

this unit

Playable

discs

U.S.A.,

Canada

Europe

Asia,

Korea

Australia,

Central and

South America

Russia

1

ALL

2

ALL

3

ALL

4

ALL

5

ALL

Introduction

4 En

Introduction

This unit is designed for use with discs having

the logos shown below. Do not attempt to load

any other type of disc into this unit.

This unit can play:

• DVD-R/RW/R DL and DVD+R/RW/R DL

discs recorded in DVD-Video compatible

format

• DVD-R/RW discs recorded in VR format

(compatible with CPRM)

• MP3, WMA, WMV, and JPEG files

recorded on CD-R/RW, DVD-R/RW,

DVD+R/RW, and USB device

• KODAK picture CDs, FUJICOLOR CDs

• ISO 9660 Level1/Level2 for CD-R/RW

•

Up to 298 folders per disc/USB device and up

to 648 files per folder with up to 8 hierarchies

•DivX

®

files recorded on CD-R/RW,

DVD-R/RW, DVD+R/RW, and USB device

– Official DivX

®

Ultra Certified product

– Plays all versions of DivX

®

video (including

DivX

®

6) with enhanced playback of DivX

®

media files and the DivX Media Format

• CD-R/RW, DVD-R/RW

/R DL

, and DVD+R/RW

/

R DL

cannot be played unless finalized.

• Progressive JPEG, copyright-protected WMA

and WMV files cannot be played with this unit.

• This unit is not compatible with WMV Advanced

profile.

• Only the first session of DVD-R/RW

/R DL and

DVD+R

/R DL

can be played.

• Discs without logos shown left are not guaranteed

to function.

• Some discs cannot be played depending on disc

characteristics or recording conditions even if

they have the logos shown left.

• Do not use any non-standard shaped discs

(heart-shaped, etc.).

• Do not use discs with tape, seals, paste or many

scratches on their surface.

y

For details about playable formats, see

“Specifications” on page 48.

• When a disc becomes dirty, clean it with a

cleaning cloth. Wipe the disc from the center

out. Do not wipe in a circular motion.

• Do not use solvents such as benzine, thinner,

commercially available cleaners, or

antistatic spray intended for analog records.

Playable disc formats

Notes

Cleaning discs

5 En

Introduction

English

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of

Dolby Laboratories.

Manufactured under license under U.S. Patent No’s : 5,451,942 and other U.S. and worldwide patents issued

and pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are

DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks

of HDMI Licensing LLC.

Patent information

This product incorporates copyright protection technology that is protected by U.S. patents and other

intellectual property rights. Use of this copyright protection technology must be authorized by

Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized

by Macrovision. Reverse engineering or disassembly is prohibited.

6 En

Functional Overview

1 STANDBY/ON

Turns on this unit or sets it to the standby mode

(see page 13). In the standby mode, this unit

consumes a small amount of power in order to

receive infrared signals from the remote control.

2 Disc tray

Loads a disc in the disc tray (see page 17).

3 OPEN/CLOSE ( )

Opens or closes the disc tray (see page 17).

4 HDMI indicator

Lights up when an HDMI component is

connected and signals output via the HDMI jack

of this unit.

5 PROGRESSIVE indicator

Lights up when this unit is in the progressive

mode (see page 34).

6 Front panel display

Shows the current status of this unit.

7 Remote control sensor

Receives infrared signals from the remote

control (see page 13).

8 PLAY ( p )

Starts playback.

9 PAUSE (   )

Pauses playback.

Frame-by-frame playback (see page 17).

0 STOP ( s )

Stops playback.

q USB port

Connect the USB connector of your USB device

(see page 12).

Front panel

1 2354 6 87 9 0 q

Functional Overview

7 En

Functional Overview

English

1 AC power cable

Plug the power cable into the AC wall outlet.

2 REMOTE CONTROL (IN, OUT) jacks

Connect the REMOTE CONTROL (IN) jack of

this unit to the remote control output jack of

your Yamaha AV receiver (see page 12).

Connect the REMOTE CONTROL (OUT) jack

of this unit to the remote control input jack of

your Yamaha component.

3 HDMI jack

Connect to the HDMI input jack of your HDMI

component (see page 11).

4 AUDIO OUT (L, R) jacks

Connect to the audio input jacks of your AV

receiver or stereo system (see page 9).

5 DIGITAL OUT - COAXIAL jack

Connect to the coaxial input jack of your AV

receiver (see page 9).

6 VIDEO OUT - COMPONENT (Y, PB/CB, PR/

C

R) jacks

Connect to the component input jacks of your

AV receiver (see page 10).

7 VIDEO OUT - S VIDEO jack

Connect to the S-video input jack of your AV

receiver (see page 10).

8 VIDEO OUT - VIDEO jack

Connect to the composite video input jack of

your AV receiver (see page 10).

9 AV terminal

(Europe and Russia models only)

Connect to the SCART input terminal of your

TV (see page 10).

Caution: Do not touch the inner pins of the jacks on the rear panel of this unit.

Electrostatic discharge may cause permanent damage to this unit.

Rear panel

MAINS

REMOTE CONTROL

OUT

HDMI

AUDIO OUT

COMPONENT VIDEO

S VIDEO

AV

COAXIAL

P

R / CR

PB / CB

Y

VIDEO OUTDIGITAL OUT

IN

914567832

(Europe model)

8 En

Functional Overview

1

Turns on this unit or sets it to the standby mode

(see page 13). In the standby mode, this unit

consumes a small amount of power in order to

receive infrared signals from the remote control.

2 TOP MENU/RETURN

Displays the top-level disc menu (DVD).

Moves back to the previous menu (DVD*/VCD)

(see page 20).

3 2 / 3/5/a

Selects an item in the currently displayed menu.

Search or slow playback (see page 27).

ENTER

Confirms the menu selection (see page 27).

4 MENU

Displays the menu of a disc (DVD/JPEG) (see

pages 18, 20, 21 and 22).

Switches PBC on or off (VCD) (see page 20).

5 l22

Moves to the previous chapter or track (see

page 17).

Searches backward (see page 17).*

6

7

Stops playback (see page 17).

Opens the disc tray.*

7 Numeric buttons (0-9)

Selects numbered items in the currently

displayed menu.

8 SUBTITLE

Selects the subtitle language (see pages 20 and

22).

9 ZOOM

Enlarges or shrinks the video image (see

pages 18 and 22).

0 ON SCREEN

Accesses or exits from the on-screen display

(OSD) menu of this unit (see page 19).

q SET UP

Accesses or exits from the setup menu of this

unit (see pages 14 and 27).

w 33l

Moves to the next chapter or track (see page 17).

Searches forward (see page 17).*

e 3 / 8

Starts or pauses playback (see page 17).

r USB

Accesses the contents of the connected USB

device or exits from the USB mode (see

page 23).

t AUDIO

Selects the audio language or format (see

pages 20 and 22).

y REPEAT

Accesses or exits from the repeat/shuffle mode

(see page 17).

u REPEAT A-B

Repeats a specified segment (see page 18).

* Press and hold the button for about two seconds.

Remote control

1

2

3

u

y

t

r

e

w

q

0

5

6

7

8

9

4

9 En

Connections

English

Be sure to turn off this unit and unplug the

power cable before you make or change

connections.

• Depending on the component you want to

connect, there are various ways to make

connections. Possible connections are

described below.

• Refer to the manuals supplied with your

other components as necessary to make the

best connections.

• Do not connect this unit via your VCR. The

video quality could be distorted by the copy

protection system.

• Do not connect the audio out jack of this unit

to the phono in jack of your audio system.

Digital connection

This unit has a digital coaxial output jack.

Connect the DIGITAL OUT - COAXIAL jack

of this unit to your AV receiver equipped with

a Dolby Digital or DTS decoder using a

commercially available coaxial digital audio

cable.

• You need to set [DIGITAL OUTPUT] to [ALL]

(see “DIGITAL OUTPUT” on page 32).

• If the audio format of the digital output does not

match the capabilities of your receiver, the

receiver produces a distorted sound or no sound

at all. Make sure to select the appropriate audio

format from the menu screen on the disc.

Pressing AUDIO on the remote control once or

more may change not only the audio languages

but also the audio format. The selected format

appears on the TV screen for several seconds.

• If you want to enjoy Dolby Digital and DTS

formats, you must connect this unit to an AV

receiver that supports these formats.

Analog connection

This unit has 2-ch analog output jacks.

Connect the AUDIO OUT (L, R) jacks of this

unit to the corresponding input jacks of your

audio component (such as a stereo amplifier)

using the supplied RCA stereo cable (Europe

and Russia models) or audio/video cable

(other models).

General notes on connections

Audio connections

AUDIO OUT

COMPONENT VIDEO

S VIDEO

AV

COAXIAL

P

R / CR

PB / CB

Y

VIDEO OUTDIGITAL OUT

C

This unit (Europe model)

AV receiver

Speakers

Coaxial digital audio cable

Notes

AUDIO OUT

COMPONENT VIDEO

S VIDEO

AV

COAXIAL

PR / CR

PB / CB

Y

VIDEO OUTDIGITAL OUT

L

R

L

R

L

Stereo

amplifier

RCA stereo cable (Europe and Russia

models) or audio/video cable

(other models)

(supplied)

Speakers

This unit (Europe model)

Connections

10 En

Connections

Make video connections to your receiver and

TV so that you can use one TV for several

different video sources (LD, VCR, etc.) by

simply switching the input source selector of

your receiver.

This unit has several types of video output

jacks. Use the one that corresponds to the

input jacks of the component to be connected.

Component video jacks <A>

Component video connections achieve higher

fidelity color reproduction than S-video

connections by transmitting video signals on

separate wires for luminance (Y: green) and

chrominance (P

B: blue, PR: red).

Connect the VIDEO OUT - COMPONENT

(Y, P

B/CB, PR/CR) jacks of this unit to

component input jacks of your AV receiver

and then to those of your TV using a

commercially available component video

cable. Observe the color of each jack when

you make connections.

If your receiver does not have component

output jacks, you can achieve a better video

image by connecting the component output

jacks of this unit directly to the component

input jacks of your TV.

S-video jack <B>

S-video connections achieve a clearer picture

than composite video connections by

transmitting video signals on separate wires

for luminance (Y) and chrominance (C).

Connect the VIDEO OUT - S VIDEO jack of

this unit to an S-video input jack of your AV

receiver and then to that of your TV using a

commercially available S-video cable.

Composite video jack <C>

Connect the VIDEO OUT - VIDEO jack of

this unit to a video input jack of your AV

receiver and then to that of your TV using the

supplied composite video cable (Europe and

Russia models) or audio/video cable (other

models).

SCART terminal <D>

(Europe and Russia models only)

You may connect the TV directly to this unit.

Connect the AV terminal of this unit to the

SCART input terminal of your TV using a

commercially available SCART cable.

The AV terminal outputs composite and RGB

video signals together with 2-ch audio signal.

Set the output of the video signal in

“Switching YUV/RGB (Europe and Russia

models only)” on page 36.

Video connections

AUDIO OUT

COMPONENT VIDEO

S VIDEO

AV

COAXIAL

P

R / CR

PB / CB

Y

VIDEO OUTDIGITAL OUT

VIDEO

OUT

VIDEO

IN

S VIDEO

OUT

COMPONENT

VIDEO OUT

COMPONENT

VIDEO IN

S VIDEO

IN

COMPONENT

VIDEO IN

S VIDEO

INPUT

VIDEO

INPUT

<D><C>

<B>

<A>

YPB/CBPR/CR

PR

Y

PB

PR

Y

PB

S

V

S

V

Composite video

cable (Europe and

Russia models)

or audio/video

cable

(other models)

(supplied)

AV receiver

TV

This unit (Europe model)

Component

video cable

S-video

cable

SCART cable

11 En

Connections

English

HDMI jack

HDMI (High-Definition Multimedia

Interface) provides high quality digital audio

and video on a single connection.

Connect the HDMI jack of this unit to an

HDMI input jack of your AV receiver, and

then to that of your TV using a commercially

available HDMI cable.

If your receiver does not have an HDMI input

jack, you can achieve a better video image by

connecting the HDMI jack of this unit directly

to the HDMI input jack of your TV.

This unit can display High-Definition JPEG

images (720p, 1080i, or 1080p) when you

connect this unit to an HDTV via the HDMI

jack. For details, see “HD JPEG” on page 37.

• You need to set [HDMI AUDIO] (see page 32)

and [HDMI VIDEO] (see page 36) properly.

• You need to make appropriate audio connections

if the connected component does not output audio

signals (see “Audio connections” on page 9).

• This unit is not compatible with HDCP-

incompatible HDMI or DVI components.

• You need a commercially available HDMI/DVI

conversion cable when you connect this unit to

other DVI components. In this case, the HDMI

jack of this unit does not output any audio

signals.

• Depending on the connected DVI component,

black and white in the image may not be distinct.

In that case, adjust the picture setting of the

connected DVI component.

• Do not disconnect or turn off the power of the

HDMI/DVI component connected to the HDMI

jack of this unit during playback. Doing so may

disrupt playback or cause noise.

y

When connecting an HDMI component, refer to the

manual supplied with your component.

HDMI connection

AUDIO OUT

COMPONENT VIDEO

S VIDEOCOAXIAL

P

R / CR

PB / CB

Y

VIDEO OUT

DIGITAL OUT

HDMI

HDMI IN

HDMI OUT

HDMI IN

HDMI cable

TV

AV receiver

This unit (Europe model)

Notes

12 En

Connections

USB port

This unit has a USB port and can access MP3,

WMA, WMV, JPEG, and DivX

®

files saved

on your USB device.

Connect a USB connector of your USB device

to the USB port on the front panel of this unit.

When your USB device is connected to the

USB port of this unit, you can record tracks on

a CD onto your USB device in MP3 format.

For details, see “Recording CD tracks onto

your USB device” on page 28.

To disconnect the USB device, press

7

to

stop playback, press USB to return to the disc

mode, and then disconnect the device from

this unit.

This unit may not recognize some USB devices.

y

For details about the USB features, see “Using a

USB device” on page 23.

Remote control jacks

This unit has remote control input/output

jacks. If your AV receiver is a Yamaha product

and has the capability to transmit SCENE

control signals, you can use the SCENE

function.

Connect the REMOTE CONTROL (IN) jack

of this unit to a remote control output jack of

your receiver using a commercially available

monaural 3.5 mm mini plug cable so that this

unit starts playback automatically by simply

pressing a SCENE button of your receiver.

y

• For details about the SCENE function, refer to

the owner’s manual supplied with your Yamaha

AV receiver.

• You can connect a Yamaha component (such as

DVD player and CD player) corresponds with the

SCENE function to the REMOTE CONTROL

(OUT) jack of this unit.

Other connections

Note

USB

device

This unit

MAINS

REMOTE CONTROL

OUT

HDMI

IN

REMOTE OUT

AV receiver

This unit

Monaural 3.5 mm mini plug

cable

13 En

Getting Started

English

1 Open the battery compartment.

2 Insert the two supplied batteries (AAA,

R03, UM-4) following the indications (+/–)

inside the compartment.

3 Close the cover.

• Insert batteries correctly according to the polarity

markings (+/–). Batteries inserted in the opposite

orientation may leak.

• Replace the exhausted batteries immediately with

new ones to prevent leakage.

• Remove the batteries from the compartment if the

remote control is not used for more than a month.

• If the batteries have leaked, dispose of them

immediately. Avoid touching the leaked material

or letting it come into contact with clothing, etc.

Clean the battery compartment thoroughly before

installing new batteries.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as

alkaline and manganese batteries) together. Read

the packaging carefully as these different types of

batteries may have the same shape and color.

• Dispose of the batteries correctly in accordance

with your local regulations.

Using the remote control

Use the remote control within 6 m

(approximately 20 ft) of this unit and point it

toward the remote control sensor.

• Do not spill water or other liquids on the remote

control.

• Do not drop the remote control.

• Do not leave or store the remote control in the

following types of conditions:

– places of high humidity, such as near a bath

– places of high temperature, such as near a

heater or stove

– places of extremely low temperature

– dusty places

• When the remote control works unstably, point it

at an angle upward to the sensor.

1 Plug the power cable into the AC outlet.

2 Turn on your TV and AV receiver.

3 Select the appropriate input source of the

AV receiver (refer to the manual supplied

with your AV receiver).

4 Press STANDBY/ON on the front panel or

on the remote control to turn on this

unit.

➜ The front panel display lights up.

5 Set the TV to the correct video input (refer

to the manual supplied with your TV).

➜ The default screen appears on the TV.

Step 1: Inserting batteries into

the remote control

Notes

2

1

3

2

Notes

Step 2: Turning on the power

Within 6 m

(approximately 20 ft)

Getting Started

14 En

Getting Started

You can customize this unit using the setup

menu displayed on the TV screen.

Unless stated otherwise, all operations described

here are carried out using the supplied remote

control.

y

• To return to the previous menu, press 2.

• If the setting you have selected are not

appropriate, you can reset all settings to the initial

factory settings (see “Resetting the system” on

page 40).

Setting a color system for your TV

This unit is compatible with both NTSC and

PAL video formats. Select the color system

that matches your TV.

1 Press SET UP.

2 Press 3 repeatedly to select “VIDEO

SETUP PAGE”.

3 Press 5/a to highlight [TV TYPE], and

then press 3.

4 Press 5/a to highlight one of the

following options.

PAL

Select this if the connected TV is a PAL

system TV. It will change the video signals of

NTSC discs and output them in PAL format.

NTSC

Select this if the connected TV is an NTSC

system TV. It will change the video signals of

PAL discs and output them in NTSC format.

MULTI

Select this if the connected TV is compatible

with both NTSC and PAL formats (such as a

multi-system TV).

The output format will be in accordance with

the video signals of the disc.

5 Select an item, and then press ENTER.

6 Press SET UP to exit from the menu.

• Before changing the current TV standard setting,

ensure that your TV supports the selected TV

type.

• When making HDMI connections, you cannot

change or select [TV TYPE].

y

If the picture is not displayed properly on your TV,

wait for 15 seconds for this unit to activate

automatic recovery.

Step 3: Setting a TV type/display

and language

Note

VIDEO SETUP PAGE

TV TYPE PAL

TV DISPLAY NTSC

PROGRESSIVE MULTI

PICTURE SETTING

BLACK LEVEL

CLOSED CAPTION

COMPONENT

HDMI SETUP

*

: [COMPONENT] is only for Europe and

Russia models.

Notes

*

.......

15 En

Getting Started

English

Setting an aspect ratio for your TV

You can set the aspect ratio of this unit to

match your TV. If the aspect ratio of your TV

is 16:9, you do not need to change this setting.

For details, see “Setting the TV display” on

page 33.

1 Press SET UP.

2 Press 3 repeatedly to select “VIDEO

SETUP PAGE”.

3 Press 5/a to highlight [TV DISPLAY],

and then press 3.

4 Press 5/a to highlight the desired setting,

and then press ENTER.

5 Press SET UP to exit from the menu.

Setting the OSD Language

You can select your own preferred language

for the setup menu. This setting remains once

selected.

1 Press SET UP.

2 Press 2 / 3 to select “GENERAL SETUP

PAGE”.

3 Press 5/a to highlight [OSD

LANGUAGE], and then press 3.

4 Press 5/a to select a language, and then

press ENTER.

5 Press SET UP to exit from the menu.

VIDEO SETUP PAGE

TV TYPE

TV DISPLAY 4:3 PAN SCAN

PROGRESSIVE 4:3 LETTER BOX

PICTURE SETTING 16:9

BLACK LEVEL

CLOSED CAPTION

COMPONENT

HDMI SETUP

*

: [COMPONENT] is only for Europe and

Russia models.

GENERAL SETUP PAGE

DISC LOCK ENGLISH

MP3 RECORD DANSK

PROGRAM DEUTSCH

DISPLAY DIM ESPAÑOL

OSD LANGUAGE FRANÇAIS

SCREEN SAVER ITALIANO

SLEEP NEDERLANDS

DIVX(R) VOD CODE NORSK

*

: The menu items may change depending on

the models.

*

.......

*

16 En

Getting Started

Setting the audio, subtitle, and disc

menu languages (DVD-Video only)

You can select your own preferred language

for the audio, subtitle, and disc menu. This

unit automatically switches to the selected

language whenever you load a disc. If the

selected language is not available on the disc,

the default language of the disc will be used

instead.

1 Press

7

twice to stop playback (if

necessary), and then press SET UP.

2 Press 3 repeatedly to select

“PREFERENCE PAGE”.

3 Press 5/a to highlight one of the options

below, and then press 3.

• AUDIO (audio language)

• SUBTITLE (subtitle language)

• DISC MENU (disc menu language)

4 Press 5/a to select a language, and then

press ENTER.

5 Repeat steps 3-4 for other language

settings.

6 Press SET UP to exit from the menu.

■ To select a language not in the list

1 Select [OTHERS] in [AUDIO],

[SUBTITLE], or [DISC MENU], and then

press ENTER.

2 Use the numeric buttons (0-9) to enter

the 4-digit language code (see “Language

Codes” on page 41), and then press

ENTER.

3 Press SET UP to exit from the menu.

PREFERENCE PAGE

AUDIO ENGLISH

SUBTITLE CHINESE (SIMP)

DISC MENU FRENCH

PARENTAL SPANISH

VR LIST RUSSIAN

DATA DISC NAV POLISH

DIVX SUBTITLE ITALIAN

PBC TURKISH

*

: The menu items may change depending on

the models.

*

Страница загружается...

Yamaha DVD-S663 Инструкция по применению

Похожие модели бренда

Модели других брендов