Yamaha P-155 Инструкция по применению

ES

FR

DE

EN

Owner’s Manual

Bedienungsanleitung

Mode d’emploi

Manual de instrucciones

ENGLISHDEUTSCHFRANÇAISESPAÑOL

PIANO NUMERIQUE

DIGITAL PIANO

P-155

Owner’s Manual

2

PLEASE KEEP THIS MANUAL

This product utilizes batteries or an external power supply

(adapter). DO NOT connect this product to any power supply

or adapter other than one described in the manual, on the

name plate, or speciﬁcally recommended by Yamaha.

WARNING:

Do not place this product in a position where

anyone could walk on, trip over, or roll anything over power or

connecting cords of any kind. The use of an extension cord is

not recommended! If you must use an extension cord, the

minimum wire size for a 25’ cord (or less ) is 18 AWG. NOTE:

The smaller the AWG number, the larger the current handling

capacity. For longer extension cords, consult a local electri-

cian.

This product should be used only with the components sup-

plied or; a cart, rack, or stand that is recommended by

Yamaha. If a cart, etc., is used, please observe all safety

markings and instructions that accompany the accessory

product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be

correct at the time of printing. However, Yamaha reserves the

right to change or modify any of the speciﬁcations without

notice or obligation to update existing units.

This product, either alone or in combination with an ampliﬁer

and headphones or speaker/s, may be capable of producing

sound levels that could cause permanent hearing loss. DO

NOT operate for long periods of time at a high volume level

or at a level that is uncomfortable. If you experience any

hearing loss or ringing in the ears, you should consult an

audiologist.

IMPORTANT: The louder the sound, the shorter the time

period before damage occurs.

Some Yamaha products may have benches and / or acces-

sory mounting ﬁxtures that are either supplied with the prod-

uct or as optional accessories. Some of these items are

designed to be dealer assembled or installed. Please make

sure that benches are stable and any optional ﬁxtures

(where applicable) are well secured BEFORE using.

Benches supplied by Yamaha are designed for seating only.

No other uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating

to how a function or effect works (when the unit is operating

as designed) are not covered by the manufacturer’s warranty,

and are therefore the owners responsibility. Please study this

manual carefully and consult your dealer before requesting

service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe

and environmentally friendly. We sincerely believe that our

products and the production methods used to produce them,

meet these goals. In keeping with both the letter and the

spirit of the law, we want you to be aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery

which (if applicable) is soldered in place. The average life

span of this type of battery is approximately ﬁve years. When

replacement becomes necessary, contact a qualiﬁed service

representative to perform the replacement.

This product may also use “household” type batteries. Some

of these may be rechargeable. Make sure that the battery

being charged is a rechargeable type and that the charger is

intended for the battery being charged.

When installing batteries, do not mix batteries with new, or

with batteries of a different type. Batteries MUST be installed

correctly. Mismatches or incorrect installation may result in

overheating and battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery.

Keep all batteries away from children. Dispose of used bat-

teries promptly and as regulated by the laws in your area.

Note: Check with any retailer of household type batteries in

your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for

some reason its useful life is considered to be at an end,

please observe all local, state, and federal regulations that

relate to the disposal of products that contain lead, batteries,

plastics, etc. If your dealer is unable to assist you, please

contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The

model number, serial number, power requirements, etc., are

located on this plate. You should record the model number,

serial number, and the date of purchase in the spaces pro-

vided below and retain this manual as a permanent record of

your purchase.

Model

Serial No.

Purchase Date

SPECIAL MESSAGE SECTION

92-BP

(bottom)

P-155

Owner’s Manual

3

1.

IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instruc-

tions contained in this manual, meets FCC requirements.

Modiﬁcations not expressly approved by Yamaha may void

your authority, granted by the FCC, to use the product.

2. IMPORTANT:

When connecting this product to accesso-

ries and/or another product use only high quality shielded

cables. Cable/s supplied with this product MUST be used.

Follow all installation instructions. Failure to follow instruc-

tions could void your FCC authorization to use this prod-

uct in the USA.

3. NOTE:

This product has been tested and found to com-

ply with the requirements listed in FCC Regulations, Part

15 for Class “B” digital devices. Compliance with these

requirements provides a reasonable level of assurance

that your use of this product in a residential environment

will not result in harmful interference with other electronic

devices. This equipment generates/uses radio frequen-

cies and, if not installed and used according to the instruc-

tions found in the users manual, may cause interference

harmful to the operation of other electronic devices. Com-

pliance with FCC regulations does not guarantee that

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

interference will not occur in all installations. If this product

is found to be the source of interference, which can be

determined by turning the unit “OFF” and “ON”, please try

to eliminate the problem by using one of the following

measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line ﬁlter/s.

In the case of radio or TV interference, relocate/reorient

the antenna. If the antenna lead-in is 300 ohm ribbon

lead, change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to dis-

tribute this type of product. If you can not locate the appro-

priate retailer, please contact Yamaha Corporation of

America, Electronic Service Division, 6600 Orangethorpe

Ave, Buena Park, CA90620

The above statements apply ONLY to those products dis-

tributed by Yamaha Corporation of America or its subsid-

iaries.

FCC INFORMATION (U.S.A.)

OBSERVERA!

Apparaten kopplas inte ur växelströmskällan (nätet) så

länge som den ar ansluten till vägguttaget, även om själva

apparaten har stängts av.

ADVARSEL:

Netspæendingen til dette apparat er IKKE

afbrudt, sålæenge netledningen siddr i en stikkontakt,

som er t endt — også selvom der or slukket på apparatets

afbryder.

VAROITUS:

Laitteen toisiopiiriin kytketty käyttökytkin ei

irroita koko laitetta verkosta.

(standby)

IMPORTANT NOTICE FOR THE UNITED KINGDOM

Connecting the Plug and Cord

IMPORTANT. The wires in this mains lead are coloured in

accordance with the following code:

BLUE : NEUTRAL

BROWN : LIVE

As the colours of the wires in the mains lead of this appa-

ratus may not correspond with the coloured makings iden-

tifying the terminals in your plug proceed as follows:

The wire which is coloured BLUE must be connected to

the terminal which is marked with the letter N or coloured

BLACK.

The wire which is coloured BROWN must be connected to

the terminal which is marked with the letter L or coloured

RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

• This applies only to products distributed

by Yamaha Music U.K. Ltd.

(2 wires)

P-155

Owner’s Manual

ENGLISH

4

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, ﬁre or other hazards. These precautions include, but are not limited to, the following:

• Only use the voltage speciﬁed as correct for the instrument. The required

voltage is printed on the name plate of the instrument.

• Use the speciﬁed adaptor (page 68) only. Using the wrong adaptor can result in

damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• Do not place the AC adaptor cord near heat sources such as heaters or radiators,

and do not excessively bend or otherwise damage the cord, place heavy objects

on it, or place it in a position where anyone could walk on, trip over, or roll

anything over it.

• Do not open the instrument or attempt to disassemble the internal parts or

modify them in any way. The instrument contains no user-serviceable parts. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualiﬁed Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, or place containers on it containing liquids which might spill into

any openings. If any liquid such as water seeps into the instrument, turn off the

power immediately and unplug the power cord from the AC outlet. Then have

the instrument inspected by qualiﬁed Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a ﬁre.

• If the AC adaptor cord or plug becomes frayed or damaged, or if there is a

sudden loss of sound during use of the instrument, or if any unusual smells or

smoke should appear to be caused by it, immediately turn off the power switch,

disconnect the adaptor plug from the outlet, and have the instrument inspected

by qualiﬁed Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• When removing the electric plug from the instrument or an outlet, always hold

the plug itself and not the cord.

• Unplug the AC power adaptor when not using the instrument, or during

electrical storms.

• Do not connect the instrument to an electrical outlet using a multiple-connector.

Doing so can result in lower sound quality, or possibly cause overheating in the

outlet.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or

heat (such as in direct sunlight, near a heater, or in a car during the day) to

prevent the possibility of panel disﬁguration or damage to the internal

components.

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment,

mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio

may generate noise.

• Do not place the instrument in an unstable position where it might accidentally

fall over.

• Before moving the instrument, remove all connected adaptor and other cables.

• When setting up the product, make sure that the AC outlet you are using is

easily accessible. If some trouble or malfunction occurs, immediately turn off

the power switch and disconnect the plug from the outlet. Even when the power

switch is turned off, electricity is still ﬂowing to the product at the minimum

level. When you are not using the product for a long time, make sure to unplug

the power cord from the wall AC outlet.

• Use only the stand speciﬁed for the instrument. When attaching the stand or

rack, use the provided screws only. Failure to do so could cause damage to the

internal components or result in the instrument falling over.

Power supply/AC power adaptor

Do not open

Water warning

Fire warning

If you notice any abnormality

Power supply/AC power adaptor Location

(3)-12

1/2

P-155

Owner’s Manual

ENGLISH

5

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all

components, set all volume levels to minimum. Also, be sure to set the volumes

of all components at their minimum levels and gradually raise the volume

controls while playing the instrument to set the desired listening level.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners,

solvents, cleaning ﬂuids, or chemical-impregnated wiping cloths.

• During extreme changes in temperature or humidity, condensation may occur

and water may collect on the surface of the instrument. If water is left, the

wooden parts may absorb the water and be damaged. Make sure to wipe any

water off immediately with a soft cloth.

• Do not insert a ﬁnger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps on the panel

or keyboard. If this happens, turn off the power immediately and unplug the

power cord from the AC outlet. Then have the instrument inspected by qualiﬁed

Yamaha service personnel.

• Do not place vinyl, plastic or rubber objects on the instrument, since this might

discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a

high or uncomfortable volume level, since this can cause permanent hearing

loss. If you experience any hearing loss or ringing in the ears, consult a

physician.

Saving and backing up your data

• Data in the instrument’s internal memory can be lost due to operational errors or

malfunction. Be sure to save any important data to external media via a

computer connected to the instrument. (page 52)

Backing up the USB Storage device

•To protect against data loss through media damage, we recommend that you

save your important data onto two USB storage devices.

Always turn the power off when the instrument is not in use.

Even when the power switch is in the “STANDBY” position, electricity is still ﬂowing to the instrument at the minimum level. When you are not using the instrument for a long

time, make sure you unplug the AC power adaptor from the wall AC outlet.

• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use.

• Windows is a registered trademark of Microsoft

®

Corporation in the United States and other countries.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

(bottom)

Connections

Maintenance

Handling caution

Saving data

Yamaha cannot be held responsible for damage caused by improper use or modiﬁcations to the instrument, or data that is lost or destroyed.

This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use

others’ copyrights. Such copyrighted materials include, without limitation, all computer software, style ﬁles, MIDI ﬁles, WAVE data, musical scores and sound

recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has

legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.

The serial number of this product may be found on the bottom of the unit. You

should note this serial number in the space provided below and retain this manual

as a permanent record of your purchase to aid identiﬁcation in the event of theft.

Model No.

Serial No.

(3)-12

2/2

P-155

Owner’s Manual

ENGLISH

6

Introduction

Thank you for purchasing the Yamaha Digital Piano!

We recommend that you read this manual carefully so that you can

fully take advantage of the advanced and convenient functions.

We also recommend that you keep this manual in a safe and

handy place for future reference.

Main Features

Graded Hammer Effect Keyboard

Thanks to our experience as the world’s leading manufacturer of acoustic pianos, we’ve developed a keyboard with

action that’s virtually indistinguishable from the real thing. Just as on a traditional acoustic piano, the keys of the lower

notes have a heavier touch, while the higher ones are more responsive to lighter playing. The keyboard’s sensitivity can

even be adjusted to match your playing style.

AWM Dynamic Stereo Sampling

This digital piano offers a rich and versatile range of sounds, which are created using Yamaha’s proprietary sampling

tone-generation system, “AWM Dynamic Stereo Sampling.”

AWM (Advanced Wave Memory) is a sampling system that creates sounds close to those of an acoustic instrument by

digitally recording the sounds of an instrument and applying high-quality digital ﬁltering technology to the recorded

audio samples.

The sound waveform created by an acoustic piano differs depending on the player’s strength of touch, from pianissimo

to fortissimo.

AWM Dynamic Stereo Sampling can create extremely dynamic nuances by recording samples at various playing

strengths. The greater the number of samples used, the greater the resulting expressiveness of the instrument.

The piano voice “Grand Piano 1” features a totally new sample recorded from a full-size concert grand piano. Each

note in the sample has been adjusted meticulously so that the digital piano will play only the very best piano sounds.

The piano voices are well-separated sounds featuring a fast attack and a satisfying response.

The “Grand Piano 1” voice features multiple wave samples for different velocities (Dynamic Sampling). That is, differ-

ent samples are used depending on how fast or strong the player strikes the keys. Therefore, this voice expresses

detailed dynamics and sounds much closer to those of a true acoustic piano.

The instrument creates a rich, luxurious sound using “Sustain Sampling,” which is a sample of the soundboard and the

resonance of the strings when the damper pedal is pressed. The instrument also features “Key-off Sampling,” which is a

sample of the very delicate noises that are caused when keys are released.

Accessories

• Owner’s Manual

•AC Power Adaptor*

*May not be included depending on your particular area. Please check with your Yamaha dealer.

• Foot Switch FC4

•Music Rest

•My Yamaha Product User Registration*

*The PRODUCT ID on the sheet will be needed when you ﬁll out the User Registration form.

P-155 Owner’s Manual

ENGLISH

7

Table of Contents

This manual consists of three main sections: Introduction, Reference and Appendix.

Introduction

Main Features..................................................... 6

Accessories ......................................................... 6

Panel Controls and Terminals............................ 8

Before Using the Instrument ........................... 10

Turning the Power On ...............................................10

Setting the Volume.....................................................10

Using the Pedals..........................................................11

Using Headphones .....................................................11

Music Rest...................................................................11

Reference

Listening to the Demo Songs .......................... 12

Using the 50 Piano “Preset” Songs ................. 13

Listening to the 50 Piano Preset Songs......................13

Practicing a One-Hand Part Using

the 50 Preset Songs (Part Cancel Function) ...........14

A-B Repeat for the 50 Preset Songs ...........................15

Selecting & Playing Voices............................... 16

Selecting Voices ..........................................................16

Combining Voices (Dual)..........................................17

Splitting the Keyboard Range and

Playing Two Different Voices ([SPLIT]) ................18

Adding Variations to the Sound –

[BRILLIANCE]/[REVERB]/

[EFFECT]/“Damper Resonance” ............................20

Touch Sensitivity – [TOUCH] ..................................22

Transposition – [TRANSPOSE] ................................23

Using the Metronome ................................................24

Recording Your Performance .......................... 25

Recording a performance quickly..............................25

Re-recording a previously recorded song..................27

Recording to RIGHT/LEFT .......................................28

Changing the Initial Settings

(data recorded at the beginning of a song).............30

Handling Recorded Songs with

a USB Storage Device....................................... 31

About Save and Load..................................................31

Saving a Song ..............................................................32

Loading a Song ...........................................................33

Deleting Song Files .....................................................34

Formatting the USB Storage Device..........................35

Playing Back “USER” and “USB” Songs ........... 36

Detailed Settings – [FUNCTION]...................... 38

Basic Procedure in Function......................................39

About Each Function .................................................40

F1. Fine Tuning of the Pitch ...............................40

F2. Selecting a Scale.............................................40

F3. Dual Functions ..............................................41

F4. Split Functions...............................................42

F5. Other Functions ............................................43

F6. Metronome Volume .....................................44

F7. MIDI Functions.............................................44

F8. Backup Functions..........................................46

Connections ..................................................... 47

Connectors..................................................................47

Connecting to a USB storage device..........................49

Connecting a Personal Computer .............................50

Transmitting Song Data between

the Computer and the Instrument..........................51

Data Backup Using a Computer....................... 52

Precautions when using

the USB [TO DEVICE] terminal......................... 53

Using USB Storage Devices........................................53

Handling the Floppy Disk Drive (FDD) and

Floppy Disks (Optional) ................................... 54

Message List ..................................................... 55

Troubleshooting............................................... 56

Preset Voice List ............................................... 57

Index................................................................. 58

Appendix

Preset Song List................................................ 60

Factory Setting List .......................................... 61

MIDI Data Format ............................................ 62

MIDI Implementation Chart ............................ 66

Specifications ................................................... 68

*The illustrations and displays as shown in this owner’s man-

ual are for instructional purposes only, and may appear some-

what different from those on your instrument.

Please read this section first.

This section explains in detail all of the instrument’s

features, functions and operations.

This section introduces reference material.

Panel Controls and Terminals

P-155

Owner’s Manual

ENGLISH

8

Panel Controls and Terminals

q

[STANDBY/ON] switch

page 10

For turning the power on or off.

w

[MASTER VOLUME] dial

page 10

For adjusting the volume level of the entire sound.

e

[DEMO] button

page 12

For playing the demo songs.

r

[TRANSPOSE] button

page 23

For shifting the pitch of the entire keyboard up or down.

t

[REC] button

page 25

For recording your keyboard performance.

y

[PLAY/PAUSE], [STOP] buttons

pages 13, 37

For playing back/pausing/stopping the preset songs, your

recorded material or commercially available music data, etc.

u

[SONG SELECT] button

pages 13, 37

For selecting a song to play back or edit.

i

[FILE] button

page 32

For saving songs to and loading songs from a USB storage

device, as well as managing song ﬁles. Also, lets you format a

USB storage device.

o

[RIGHT], [LEFT] buttons

pages 14, 37

For turning the left- and right-hand parts on or off as required

so you can practice the corresponding part (the part that is

turned off) on the keyboard.

!0

[METRONOME] button

pages 24, 44

For starting/stopping the metronome function.

!1

[TEMPO/FUNCTION –, +] button

pages 24, 39

For changing the song tempo (speed) and selecting other useful

functions (pages 38–46).

!2

Display

page 10

For showing information on certain settings and values of the

instrument.

!3

[–/NO], [+/YES] buttons

For setting values or performing ﬁle operations.

Pressing both buttons simultaneously for certain value settings

(Transpose, Tempo, etc.) restores the default value.

!4

Voice group buttons page 16

For selecting voices from 17 internal sounds including Grand

Piano 1, 2 and 3.

!5

[SPLIT] button page 18

For playing different voices on the left- and righthand sections

of the keyboard.

!6

[BRILLIANCE] button page 20

For adjusting the brightness of the sound.

!7

[REVERB], [EFFECT] buttons pages 20, 21

For adding reverb and chorus effects to the selected voice for

your keyboard performance.

!8

[TOUCH] button page 22

For selecting the touch response.

!9

[PHONES] jack page 11

For connecting a set of standard stereo headphones, allowing

private practice.

CAUTION

Never attempt to turn off the power while ﬂashing dashes

appear in the display, indicating data is being written to internal

memory. Doing so may result in loss of all user data.

Front panel

A-1 B-1 C0 D0 E0 F0 G0 A0 B0 C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3

q erty ui o !0 !1 !2

w

Panel Controls and Terminals

P-155 Owner’s Manual

ENGLISH

9

@0

USB [TO DEVICE] terminal page 47

For connecting the instrument to a USB storage device, allowing

saving/loading of data to and from the connected device.

@1

AUX OUT [L/L+R][R] jacks page 47

For connecting an external tone generator, allowing you to play

the sound of that device via the instrument’s internal sound sys-

tem and speakers.

@2

MIDI [IN] [OUT] terminals page 48

For connecting external MIDI devices, allowing the use of vari-

ous MIDI functions.

@3

[SUSTAIN PEDAL] jack pages 11, 48

For connecting an included FC4 foot switch or an optional FC3

foot pedal/FC5 foot switch.

@4

[AUX PEDAL] jack pages 11, 48

For connecting an included FC4 foot switch or an optional FC3

foot pedal/FC5 foot switch/FC7 foot controller.

@5

[DC IN 16V] jack page 10

For connecting the included power adaptor.

Rear panel

F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B4 C5 D5 E5 F5 G5 A5 B5 C6 D6 E6 F6 G6 A6 B6 C7

!3 !4 !5 !6 !7 !8

!9

@5 @0 @1 @2 @3 @4

Before Using the Instrument

P-155 Owner’s Manual

ENGLISH

10

Before Using the Instrument

Tur ning the Power On

1. Connect the power adaptor’s DC cable to

the [DC IN 16V] jack.

2. Plug the AC adaptor into an AC outlet.

WARNING

Use the speciﬁed adaptor (page 68) only. The use of other adaptors

may result in irreparable damage to both the adaptor and the Instru-

ment.

CAUTION

Unplug the AC Power Adaptor when not using the Instrument, or

during electrical storms.

3. Press the [STANDBY/ON] switch to turn the power on.

The display located in the center of the front panel lights up.

When you’re ready to turn off the power, press the [STANDBY/ON] switch again.

CAUTION

Even when the instrument is turned off, electricity is still ﬂowing to the instrument at the minimum level. When you are

not using the instrument for a long time, make sure you unplug the AC power adaptor from the wall AC outlet.

Setting the Volume

Initially set the [MASTER VOLUME] dial about halfway between the

“MIN” and “MAX” settings. Then, when you start playing, re-adjust the

[MASTER VOLUME] dial to the most comfortable listening level.

TERMINOLOGY

MASTER VOLUME:

The volume level of the entire keyboard sound

(The shape of plug differs

depending on locale.)

Display

Normally indicates tempo.

[STANDBY/ON] switch

The level

increases.

The level

decreases.

Before Using the Instrument

P-155 Owner’s Manual

ENGLISH

11

Using the Pedals

Sustain Pedal (Sustain Pedal jack)

This jack is for connecting the included foot switch FC4. The pedal functions in the

same way as a damper pedal on an acoustic piano. Connect the included foot switch

FC4 to this jack and press the pedal to sustain the sound.

When “Damper Resonance” is on, the instrument simulates the sustain sound that

occurs when you press the damper pedal of a grand piano, as you press the damper

pedal and play the keyboard.

An optional FC3 foot pedal or FC5 foot switch can also be connected to this jack. For

the FC3, the further down the pedal is pressed, the longer the sound will be sustained.

(It can be used like a half pedal effect).

• The depth of the effect produced by the Sustain Samples can be adjusted via the Pedal func-

tions (pages 39, 43) in Function.

AUX Pedal (AUX Pedal jack)

This jack is for connecting an optional FC3 foot pedal, FC5 foot switch or FC7 foot

controller. An included foot switch FC4 can also be connected to this jack. A wide

range of functions, including the Soft Pedal function, can be assigned to this jack. For

instructions on assigning the pedal, refer to pages 39, 43.

• The FC7 Foot Controller can be used to control Expression (pages 39, 43).

Using Headphones

Connect a set of headphones to one of the [PHONES] jacks.

Two [PHONES] jacks are provided.

You can connect two sets of standard stereo headphones. (If you are using

only one set of headphones, you can plug them into either jack.)

CAUTION

Do not use the instrument at a high volume level for a long period of time, or

your hearing may be damaged.

CAUTION

The speakers are automatically shut off when a plug is inserted into this jack.

• Optional headphones:

HPE-150 Yamaha headphones

Music Rest

The instrument includes a music rest that can be attached to the

instrument by inserting it into the holes at the top of the control

panel.

If the sustain pedal doesn’t work,

make sure that the pedal cord is

properly plugged into the jack.

TERMINOLOGY

Half-pedal:

While playing the piano with Sus-

tain and you want to slightly mute

the sustained sound, release the

pedal from maximum position to

half position.

NOTE

FC4

On front panel

Standard stereo

phone plug

Listening to the Demo Songs

P-155 Owner’s Manual

ENGLISH

12

Listening to the Demo Songs

Demo songs are provided that effectively demonstrate each of the instrument’s voices.

1. Press the [STANDBY/ON] switch to turn the power

on (page 10).

When the power is turned ON, one of the voice button indicators will light.

2. Adjust the volume (page 10).

Initially set the [MASTER VOLUME] dial about half way between the “MIN” and

“MAX” settings. Then, when you start playing, re-adjust the [MASTER VOL-

UME]

dial to the most comfortable listening level.

3. Press the [DEMO] button to listen to the Demo

songs.

The VOICE button indicators will ﬂash in sequence, then the GRAND PIANO 1

demo song will start. Demo songs provided for each voice will play back in

sequence until you press the [DEMO] or [STOP] button.

Changing a demo song

You can change to another Demo song during playback by pressing the desired

VOICE button.

Demo Song List

• The demonstration song of CHURCH ORGAN features short rearranged excerpts of the

original composition.

4. Press the [DEMO] or [STOP] button to stop the

Voice demo.

3

4

34

Demo song data is not transmit-

ted via the MIDI terminals.

MIDI reception is not possible

during Demo song playback.

Demo songs cannot be played

during song recording (page 25)

or in the File Operation mode

(page 39).

You cannot adjust the tempo of

demo songs.

You cannot use the Part Cancel

function (page 14) or the Song

A-B Repeat function (page 15) in

Demo.

NOTE

Voice Name Title Composer

GRAND PIANO 1 Original Original

GRAND PIANO 2 Original Original

ELECTRIC PIANO 1 Original Original

ELECTRIC PIANO 2 Original Original

JAZZ ORGAN Original Original

CHURCH ORGAN

Herr Christ, der ein’ge Gottes-

Sohn, BWV.601

J. S. Bach

STRINGS 1

([STRINGS/OTHERS] o 1)

Original Original

Reference

Using the 50 Piano “Preset” Songs

P-155 Owner’s Manual

ENGLISH

13

Using the 50 Piano “Preset” Songs

Listening to the 50 Piano Preset Songs

The instrument provides performance data of 50 piano songs. You can simply listen to these songs

(page 60) or use them for practice (page 14).

1. Press the [SONG SELECT] button a few times until

the “PRESET” indicator lights.

2. Press the [–/NO], [+/YES] buttons to select the num-

ber of the tune you want to play.

The number will appear on the display.

1–50: Select a preset song number and play only the song.

ALL: Play all preset songs in sequence.

rnd: Play all preset songs continuously in random order.

3. Press the [PLAY/PAUSE] button to start playback.

Adjust the tempo

You can use the [TEMPO/FUNCTION –, +] buttons to adjust the playback tempo

as required. This produces a relative tempo variation, with a range from “–50”

through “0” to “50” at maximum; the range will differ depending on the

selected song.

The default tempo can be recalled by simultaneously pressing the [–] and [+]

buttons.

4. Stop playback.

Playback will stop automatically when the selected preset song has ﬁnished. To

stop the song during playback (or continuous playback), press the [STOP] but-

ton. You can also pause playback by pressing the [PLAY/PAUSE] button.

To play back another song continuously, see step 2 above.

5.

Press the [SONG SELECT] button to exit Preset Song

playback.

The indicator turns off, and the instrument returns to normal play.

52

34

1

Preset songs cannot be played

during Demo/USER/USB songs

playback, song recording

(page 25), or in the File Operation

mode.

TERMINOLOGY

Song:

On the instrument, performance

data is called a “Song.” This

includes demonstration tunes and

piano preset tunes.

Preset:

Preset Data supplied with the

internal memory of the instrument

shipped from the factory.

You can play the keyboard along

with the preset song. You can

change the voice playing on the

keyboard.

The default tempo “0” is automati-

cally selected whenever a new

preset song is selected, or when

playback of a new preset song

begins during “ALL” or “rnd”

playback.

When you select a different song

(or a different song is selected

during chained playback), appro-

priate reverb and effect types will

be selected accordingly.

You can adjust the Brilliance con-

trol (page 20) and Reverb type

(page 20) that is applied to the

voice played from the keyboard

and to preset song playback. You

can change the Effect settings

(page 21) and Touch sensitivity

(page 22) for the keyboard voice

as well.

NOTE

Using the 50 Piano “Preset” Songs

P-155 Owner’s Manual

ENGLISH

14

Practicing a One-Hand Part Using the 50 Preset Songs

(Part Cancel Function)

The 50 preset songs have separate left- and right-hand parts on individual parts. You can turn the

left- and right-hand parts on or off as required so you can practice the corresponding part (the part

that is turned off) on the keyboard. The right-hand part is played by [RIGHT] and the left-hand part

is played by [LEFT].

1. Turn off the playback part you wish to practice.

After you select a song to practice, press the [RIGHT] or [LEFT] button to turn

off the corresponding part.

When you ﬁrst select a song, both [RIGHT] and [LEFT] indicators light up, indi-

cating that you can play back both parts. When you press one of the buttons to

turn off playback, the corresponding button indicator turns off and the corre-

sponding part playback is muted.

Pressing the buttons repeatedly toggles playback between on and off. The parts

can be turned on or off even during playback.

2. Press the [PLAY/PAUSE] button to start playback

and playing.

Play the part you just turned off.

Starting playback automatically

as you start playing the keyboard (Sync Start)

You can cause playback to begin when you play the keyboard (Sync Start). Hold

down the [STOP] button and press the [PLAY/PAUSE] button. The [PLAY/

PAUSE]

indicator will blink, and the instrument will wait for Sync Start. Now

when you play the keyboard, playback will begin at the same moment. If you

press the [STOP] button while waiting, Sync Start will be cancelled.

Pedal Play/Pause

A pedal connected to the

[AUX PEDAL] connector can be assigned to play and

pause preset song playback via the AUX Pedal function described on pages 39,

43.

3. Stop playback.

When playback is complete, it automatically stops and the instrument locates

the top of the song. If you wish to stop playback in the middle of a song, press

the [STOP] button. You can also pause playback by pressing the [PLAY/PAUSE]

button.

1

23

The Preset Song Part Cancel

function cannot be used during

“ALL” or “rnd” (page 13) play-

back.

Resetting the part playback

Both parts are automatically

turned ON whenever you select a

new song.

NOTE

TERMINOLOGY

Sync:

Synchronized; occurring at the

same time.

Using the 50 Piano “Preset” Songs

P-155 Owner’s Manual

ENGLISH

15

A-B Repeat for the 50 Preset Songs

The A-B Repeat function can be used to continuously repeat a speciﬁed phrase within a preset song.

Combined with the Part Cancel function (page 14), this provides an excellent way to practice difﬁ-

cult phrases.

1. Select and play a preset song.

2. Press the [TEMPO/FUNCTION] button at the begin-

ning of the phrase you want to repeat.

This sets the “A” point ( will appear on the display).

3. Press the [TEMPO/FUNCTION] button a second

time at the end of the phrase.

This sets the “B” point ( will appear on the display).

At this point, repeat playback will begin between the speciﬁed A and B points.

4. Press the [STOP] button to stop playback.

A-B repeat playback will resume if you press the [PLAY/PAUSE] button.

To cancel the A and B points, press the

[TEMPO/FUNCTION] button once.

4 3

2

The A-B Repeat function cannot

be used during “ALL” or “rnd”

(page 13) playback.

NOTE

•To set the “A” point at the very

beginning of the song, press

the [TEMPO/FUNCTION] but-

ton before starting playback.

•You can have the B point auto-

matically be set to the song’s

end, by setting the A point and

letting the song play to the end.

An automatic lead-in (to help

guide you into the phrase) starts

at the A point of the song.

After setting the A and B points,

you can set the Sync Start

(page 14) and Pedal Play/Pause

(page 14) functions.

NOTE

AB

Repeat A through B

The A and B points are automati-

cally canceled when a new song

is selected.

NOTE

Selecting & Playing Voices

P-155 Owner’s Manual

ENGLISH

16

Selecting & Playing Voices

Selecting Voices

Select the desired voice by pressing one of the Voice

buttons.

[STRINGS/OTHERS] button

Pressing the [STRINGS/OTHERS] button switches among the following eleven

voices.

Then, when you start playing, re-adjust the

[MASTER VOLUME] dial for the most com-

fortable listening level.

Voice Name

To familiarize yourself with the

characteristics of the voices, lis-

ten to the demo songs for each

voice (page 12). Refer to “Preset

Voice List” on page 57 for more

information on the characteristics

of each preset voice.

TERMINOLOGY

Voice:

On the instrument, the term

“voice” means “instrument

sound.”

You can control the loudness of a

voice by adjusting the force with

which you strike the keys,

although different playing styles

(touch sensitivities) have little or

no effect with certain musical

instruments.

Refer to “Preset Voice List” on

page 57.

If you select the voice via the

[STRINGS/OTHERS] button then

press another VOICE button, the

voice last selected via the

[STRINGS/OTHERS] button will

be maintained. In other words,

pressing the [STRINGS/OTH-

ERS] button again calls up the

last selected voice.

NOTE

Display Voice Name

o 1

STRINGS 1

o 2

STRINGS 2

o 3

CHURCH ORGAN 2

o 4

HARPSICHORD

o 5

E.CLAVICHORD

o 6

VIBRAPHONE

o 7

CHOIR

o 8

GUITAR

o 9

WOOD BASS

o10

BASS & CYMBAL

o11

E.BASS

Selecting & Playing Voices

P-155 Owner’s Manual

ENGLISH

17

Combining Voices (Dual)

You can play voices simultaneously across the entire range of the keyboard. In this way, you can

combine similar voices to create a thicker sound.

1. Press two voice buttons at the same time (or press

one voice button while holding another) to engage

Dual.

The voice indicators of both selected voices will light when Dual is active.

Play the keyboard.

If you want to use a voice selected via the [STRINGS/OTHERS] button, press the

[STRINGS/OTHERS] button several times to call up the desired voice while

holding any other VOICE button. The number of the voice name of the

[STRINGS/OTHERS] button is displayed on screen.

According to the voice numbering priority shown in the diagram below, the

lower value voice number will be designated as Voice 1 (the other voice will be

designated as Voice 2).

The Function provides access to a number of other Dual functions, such as vol-

ume balance setting and octave setting (pages 39, 41). (If you do not set the

Dual functions, the appropriate setting will be set in each voice by default.)

2. Press any single voice button to return to the nor-

mal single-voice play.

2

1

Two voices in the [STRINGS/

OTHERS] button cannot be

engaged at the same time.

Dual and Split cannot be

engaged at the same time.

[REVERB] in Dual:

The reverb type assigned to

Voice 1 will take priority over the

other. (If the reverb is set to OFF,

Voice 2 reverb type will be in

effect.)

[EFFECT] in Dual:

Depending on the condition, one

effect type may take priority over

the other. The depth is deter-

mined according to the default

depth value of the voice combina-

tion. However, using function F3

(page 41) you can adjust the

depth value for each voice to your

liking.

NOTE

1 2 3 4 5 6 7

Voice numbering priority

Selecting & Playing Voices

P-155 Owner’s Manual

ENGLISH

18

Splitting the Keyboard Range and Playing Two Different

Vo ices ([SPLIT])

Split enables you to play two different voices on the keyboard — one with the left hand and

another with the right hand. For example, you can play a bass part using the Wood Bass or Electric

Bass voice with the left hand, and a melody with the right hand.

1. Press the [SPLIT] button to engage Split.

The [SPLIT] button lights.

As a default setting, WOOD BASS will be selected for the left-hand part.

The Function provides access to a number of other Split functions (pages 39,

42). (If you make no settings for the Split functions, the appropriate setting will

be set in each voice by default.)

2. Specify the split point (the border between the

right- and left-hand range).

Press and hold down the [SPLIT] button and play the key you wish to assign as

the split point.

(The split point is initially set at the F#2 key by default. If you do not need to

change the split point, skip this step.) You can check the name of the current

split point key on the LED display by holding down the [SPLIT] button.

An example of split-point key display

Split point (default setting: F#2)

Bass voice Melody

1

452

3

Dual and Split cannot be

engaged at the same time.

TERMINOLOGY

Default setting:

The “Default setting” refers to the

factory setting obtained when you

ﬁrst turn on the power to the

instrument.

A speciﬁed “split point” key is

included in the left-hand range.

The split point can also be set by

the Function F4.1 (page 42).

The split point can also be

changed by simultaneously hold-

ing down the [SPLIT] button and

pressing the [–/NO] or [+/YES]

button.

The default split point can be

recalled by simultaneously hold-

ing down the [SPLIT] button and

pressing both the [–/NO] and [+/

YES] buttons together.

NOTE

F 2

F#2

Eb2

followed by a high bar if sharp

followed by a low bar if ﬂat

Selecting & Playing Voices

P-155 Owner’s Manual

ENGLISH

19

3. Press a voice button to select a voice for the right

hand.

If you want to use a voice selected via the [STRINGS/OTHERS] button, press the

[STRINGS/OTHERS] button several times to call up the desired voice. The voice

number of the [STRINGS/OTHERS] button is displayed on screen.

4. Press the corresponding voice button while holding

the [SPLIT] button to select a voice for the left hand.

The indicator of the left voice button will light while the [SPLIT] button is

pressed.

If you want to use a voice selected via the [STRINGS/OTHERS] button, press the

[STRINGS/OTHERS] button several times to call up the desired voice while

holding the [SPLIT] button. The voice number of the [STRINGS/OTHERS] but-

ton is displayed on screen.

5. Press the [SPLIT] button to return to the normal sin-

gle-voice play.

[REVERB] in Split

The reverb type assigned to the

right voice will take priority over

the other. (If the reverb is set to

OFF, the left voice’s reverb type

will be in effect.) Reverb depth

settings made via the panel con-

trols (i.e., pressing the [–/NO] or

[+/YES] buttons while holding the

[REVERB] button; see page 20)

will be applied to both voices.

[EFFECT] in Split

Depending on the conditions, one

effect type will take priority over

the other. The depth will be

decided according to the default

depth value of the voice combina-

tion. However, using Function F4

(pages 39, 42) you can change

the depth value for each voice as

you like. Effect depth settings

made via the panel controls (i.e.,

pressing the [–/NO] or [+/YES]

buttons while holding the

[EFFECT] button; see page 21)

will be applied to the right voice

only.

NOTE

Selecting & Playing Voices

P-155 Owner’s Manual

ENGLISH

20

Adding Variations to the Sound – [BRILLIANCE]/

[REVERB]/[EFFECT]/“Damper Resonance”

[BRILLIANCE]

You can use this control to adjust the brilliance of the tone and change the tonality to

suit your preference.

BRIGHT: Bright tone

NORMAL: Standard tone

MELLOW: Soft and mellow tone

To select a brilliance type, press the [BRILLIANCE] button a few times until the indica-

tor corresponding to the desired type lights (the indicator lights in sequence each time

you press the [BRILLIANCE] button). Brilliance can be selected among ﬁve types. When

two adjacent indicators are lit, the type that is between the two indicated types is

selected. For example, when both NORMAL and MELLOW are lit, the brilliance set-

ting between NORMAL and MELLOW is selected.

[REVERB]

This control enables you to select various digital reverb effects for adding extra depth

and expression to the sound and creating a realistic acoustic ambience.

OFF: When no reverb effect is selected, no REVERB indicator is lit.

ROOM: This setting adds a continuous reverb effect to the sound, similar to the

acoustic reverberation you would hear in a room.

HALL 1: For a “bigger” reverb sound, use the HALL 1 setting. This effect simulates

the natural reverberation of a small-size concert hall.

HALL 2: For a truly spacious reverb sound, use the HALL 2 setting. This effect simu-

lates the natural reverberation of a large concert hall.

STAGE: Simulates the reverb of a stage environment.

Pressing the [REVERB] button repeatedly toggles the reverb on and off.

The indicators light in sequence each time the [REVERB] button is pressed. When all

indicators are off, no effect is produced.

Adjusting Reverb Depth

Adjust the reverb depth for the selected voice by using the

[–/NO] [+/YES] buttons

while holding the

[REVERB] button. Default depth settings are different for each voice.

The depth range is from 0 (no effect) through 20 (maximum reverb depth). The cur-

rent depth setting appears on the display while the [REVERB] button is held.

[BRILLIANCE] button[–/NO] [+/YES] buttons

[REVERB] button

[EFFECT] button

Default setting = NORMAL

When the BRILLIANCE is set to

BRIGHT, the overall sound will be

slightly louder. If the MASTER

VOLUME is set at a high level the

sound may become distorted. If

so, lower the MASTER VOLUME

level.

NOTE

The default reverb type (including

OFF) and depth settings are dif-

ferent for each voice.

NOTE

Releasing the [REVERB] button

changes the reverb type.

If you are changing the reverb

depth by holding the [REVERB]

button, releasing the [REVERB]

button will not change the reverb

type.

NOTE

Страница загружается...

Yamaha P-155 Инструкция по применению

Похожие модели бренда