HP Color LaserJet CM1312 Multifunction Printer series Инструкция по началу работы

+LHUHUKDOWHQ6LH

,QIRUPDWLRQHQ]X

IROJHQGHQ7KHPHQ

.RSLHUHQ

)D[

6FDQQHQ

:DUWHQ

,QIRUPD]LRQLVX

&RSLD

)D[

6FDQVLRQH

0DQXWHQ]LRQH

/HDUQKRZWR

&RS\

)D[

6FDQ

0DLQWDLQ

ƿǱǵǶǴǷǮǺǬǬ

ǁǲǳǬǴǲǥǣǱǬǨ

ǇǣǤǲǶǣǵǸǣǮǵǲǰ

ǈǮǣǱǬǴǲǥǣǱǬǨ

ǅǤǵǯǷǪǬǥǣǱǬǨ

www.hp.com

HP Color LaserJet CM1312 MFP Series

Quick Reference Guide

Table of Contents

Make my copy look better .....................................................................................................................................................1

Print on both sides (duplex) ....................................................................................................................................................2

Scan from the PC .................................................................................................................................................................4

Send my scan to a folder ......................................................................................................................................................5

Make my scan look better .....................................................................................................................................................6

Schedule a fax ....................................................................................................................................................................7

Create and edit speed dials ................................................................................................................................................10

Delete faxes from memory ...................................................................................................................................................12

Print individual photos from memory card .............................................................................................................................13

Adjust color settings ...........................................................................................................................................................15

Clean the paper path .........................................................................................................................................................17

www.hp.com



English

Copy

Make my copy look better

NOTE: The factory-set default for copy quality is Auto Select, where

product automatically chooses the best quality setting based on the

media input.

?

1

On the product control panel, press Copy Features.

-or-

On products with a graphical display, press Copy Menu, then

use the arrow keys to select Options, and then press OK.

2

Use the arrow buttons to select Optimize, and then press OK to

see the quality setting for the copy.

3

Use the arrow buttons to scroll through the quality setting

options.

4

Select a setting, and then press Start Copy Black or Start Copy

Color to save the selection and immediately start the copy job,

or press OK to save the selection without starting the job.

?

Optimize

Options

?



Print

Print on both sides (duplex)

1

In the software program, at the Print dialog window, open the

properties (printing driver).

2

On the Finishing tab, select Print on both sides (manually).

3

Press OK, and press OK again to print the document.

4

After one side has been printed, remove the remaining media

from the input tray, and set it aside until after you nish the

duplexing job.

2

3



English

5

Without changing the orientation, remove the printed stack

from the output bin, and then straighten the stack.

6

Maintaining the same orientation, place the stack of media in

the input tray again. The printed side should be facing down

with the top edge feeding into the product rst.

7

When the message [OK] to print appears on the control-panel

display, press OK.

?

[OK] to print



Scan

Scan from the PC

1

In the HP program group, select your product, then select Scan

to start HP LaserJet Scan.

NOTE: Pressing Start Scan on the product control panel also

starts HP LaserJet Scan.

?

2

Choose the action that you want to accomplish.

● Select a destination to begin scanning immediately.

● Select Scan after prompting me for settings to specify

additional settings before you begin scanning.

● Select Set up the device to program the Scan To button.

3

Click OK.

?



English

Send my scan to a folder

1

Load the originals that are to be scanned face-up in the automatic document feeder

(ADF) input tray, with the top of the document forward, and adjust the media guides.

-or-

Lift the atbed scanner lid and load the original that is to be scanned face-down on

the atbed scanner with the corner located as indicated by the icon on the scanner.

Gently close the lid.

2

On the product control panel, press Scan Menu.

?

3

Use the arrow buttons to select Select Computer, and then press OK.

Chose the destination computer, and then press OK.

?

4

Use the arrow buttons to select a le destination, and then press OK.

?

5

Press Start Scan or OK to scan the document to a le.

?

Select

Computer

Folder Name



Make my scan look better

1

Turn off the product, unplug the power cord from the electrical socket,

and raise the lid.

2

Clean the glass by using a soft cloth or sponge that has been moistened

with nonabrasive glass cleaner.

3

Clean the scanner strip by using a soft cloth or sponge that has been

moistened with nonabrasive glass cleaner.

4

To prevent spotting, dry the glass by using a chamois or cellulose

sponge.



English

Fax

Schedule a fax

1

Load the document into the automatic document feeder

(ADF) input tray or onto the atbed scanner.

2

On the control panel, press Fax Menu.

.

3

Use the arrow buttons until Send appears, and then press

OK.

?

.



4

Use the arrow buttons until Send fax later appears, and then

press OK.

?

.

5

Use the alphanumeric buttons to enter the time.

?

.

6

If the product is set to the -hour time mode, use the arrow

buttons to move to A.M. or P.M. Select A.M. or select P.M.,

and then press OK.

-or-

If the product is set to the -hour time mode, press OK.

?

7

Use the alphanumeric buttons to enter the date, and then

press OK.

-or-

Accept the default date by pressing OK.

?

.

Send fax

later

A.M.



English

8

Enter the fax number, enter the speed dial, or press the one-

touch key.

.

9

Access the phone book by pressing Fax Menu on the control

panel and then selecting Phone Book.

.

10

Press OK or Start Fax. The product scans the document into

memory and sends it at the designated time.

.

Phone Book

0

Create and edit speed dials

1

On the control panel, press Fax Menu.

.

2

Use the arrow buttons to select Phone Book, and then press OK.

?

3

Use the arrow buttons to select Individual Setup. Press OK.

?

4

Press OK to select Add.

?

Phone Book

Individual

Setup

Add



English

5

Use the alphanumeric buttons to enter a name for the fax number. To do

so, repeatedly press the alphanumeric button for the letter that you need

until the letter appears.

?

.

6

Use the alphanumeric buttons to enter the fax number. Include any

pauses or other needed numbers, such as an area code, an access code

for numbers outside a PBX system (usually a  or 0), or a long distance

prex.

7

Press OK.

?

8

Press OK to save the information.

9

If you have more speed dials to program, repeat steps  through .



Delete faxes from memory

?

1

On the control panel press Setup ( ).

2

Use the arrow buttons to select Service, and then press OK.

?

3

Use the arrow buttons to select Fax Service, and then press OK.

?

4

Use the arrow buttons to select Clear saved faxes, and then press OK.

?

5

Press OK to conrm the deletion.

Service

Clear saved

faxes

Fax Service



English

Photos

Print individual photos from memory card

1

Insert the memory card into the product. The Photo Menu displays.

?

2

Use the arrow buttons to select Easy Print and then press OK.

?

3

Use the arrow buttons to select Individual photo and then press OK.

?

Photo menu

Individual

photo

Easy print



4

Use the arrow buttons or numeric keypad to make selections for each of

the following menu items, and then press OK.

● Enter photo number: Select an individual photo to print.

The photos are numbered, starting with number .

● Select image size: Set the size for the printed image.

● Select paper size: Select the media size.

● Select paper type: Select the media type.

● Number of copies: Set the number of copies to print ( to ).

?

.

5

When the message [OK] to print appears on the control-panel display,

press OK.

?

[OK] to print



English

Maintain

Adjust color settings

Setting color options to Automatic typically produces the best

possible print quality for color documents. The Automatic color

adjustment option optimizes the neutral-gray color treatment,

halftones, and edge enhancements for each element in a document.

Use the Manual color adjustment option to adjust the neutral-

gray color treatment, halftones, and edge enhancements for text,

graphics, and photographs. To gain access to the manual color

options, from the Color tab, select Manual, and then select Settings.

Use manual color options to adjust the Neutral Grays, Halftone,

and Edge Control options for text, graphics, and photographs.



Manual color options

●

Halftone options affect the color output resolution and clarity.

● Smooth provides better results for large, solid-lled print areas and enhances

photographs by smoothing color gradations. Select this option when uniform

and smooth area lls are the top priority.

● Detail is useful for text and graphics that require sharp distinctions among lines

or colors, or images that contain a pattern or a high level of detail. Select this

option when sharp edges and details are the top priority.

●

The Neutral Grays setting determines the method for creating gray colors

used in text, graphics, and photographs.

● Black Only generates neutral colors (grays and black) by using only black

toner. This guarantees neutral colors without a color cast. This setting is best for

documents and grayscale viewgraphs.

● 4-Color generates neutral colors (grays and black) by combining all four toner

colors. This method produces smoother gradients and transitions to other

colors, and it produces the darkest black.

●

The Edge Control setting determines how edges are rendered.

Edge control has two components: adaptive halftoning and trapping.

Adaptive halftoning increases edge sharpness. Trapping reduces the

effect of color-plane misregistration by overlapping the edges of adjacent

objects slightly.

● Maximum is the most aggressive trapping setting. Adaptive halftoning is on.

● Normal sets trapping at a medium level. Adaptive halftoning is on.

● Light sets trapping at a minimal level, Adaptive halftoning is on.

● Off turns off both trapping and adaptive halftoning.



English

Clean the paper path

If you do not have access to HP ToolboxFX, you can print and use a cleaning page from the product control panel.

1

Press Setup ( ).

2

Use the arrow buttons to nd the Service menu, and then

press OK.

?

3

Use the arrow buttons to nd Cleaning mode, and then press

OK.

?



4

Load plain letter or A paper when you are prompted.

5

Press OK again to conrm and begin the cleaning process.

?

6

A page feeds through the product slowly.

Discard the page when the process is completed.

Страница загружается...

HP Color LaserJet CM1312 Multifunction Printer series Инструкция по началу работы

Похожие модели бренда

Модели других брендов